Relevant bibliographies by topics / UV photolithography

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers

Academic literature on the topic 'UV photolithography'

Author: Grafiati
Published: 4 June 2021
Last updated: 18 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'UV photolithography.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "UV photolithography"

1

Guijt, Rosanne M., and Michael C. Breadmore. "Maskless photolithography using UV LEDs." Lab on a Chip 8, no. 8 (2008): 1402. http://dx.doi.org/10.1039/b800465j.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Casalboni, M., L. Dominici, V. Foglietti, F. Michelotti, E. Orsini, C. Palazzesi, F. Stella, and P. Prosposito. "Bragg Grating Optical Filters by UV Nanoimprinting." Journal of Nanomaterials 2012 (2012): 1–5. http://dx.doi.org/10.1155/2012/186429.

Full text
Abstract:
Results on an optical waveguide filter operating in the near IR region are reported. The device consists of a hybrid sol-gel -based grating loaded waveguide, obtained through the merging of conventional photolithography and UV-nanoimprinting. Starting from submicrometric gratings, fabricated by electron beam lithography, a soft mould has been produced and the original structures were replicated onto sol-gel photosensitive films. A final photolithographic step allowed the production of grating-loaded channel waveguides. The devices were optically characterized by transmission measurements in the telecom range 1450–1590 nm. The filter extinction ratio is −11 dB and the bandwidth is 1.7 nm.
APA, Harvard, Vancouver, ISO, and other styles
3

Suwandi, Dedi, Yudan Whulanza, and Jos Istiyanto. "Visible Light Maskless Photolithography for Biomachining Application." Applied Mechanics and Materials 493 (January 2014): 552–57. http://dx.doi.org/10.4028/www.scientific.net/amm.493.552.

Full text
Abstract:
Maskless photolithograpy is an alternative method of conventional UV photolithograpy for microfabrication since its advantages of time and cost saving. For this reason, a visible-light based maskless photolithograpy is proposed as a part of biomachining process. Modification of the method is done by replacing light source of UV light to visible light, utilizing commercial DLP projector and changing the material removal process that generally uses echant with biomachining process. The process was done by using the profile generated by computer then displayed through a commercial DLP projector shining speciment test. Focusing lens placed under the projector to draw the focal point and reduces the size of the profile. The best parameter was determined by setring exposure time, developing time, variation profiles, focusing, colors combination and optical aspect. Using a commercial projector maskless photolithography on a negative resist tone successfully performed. The best characteristic was obtained by placing the focusing lens 3X magnification within 3 cm below the projector and 14 cm above speciment test, color combination of black-light blue (R = 0, G = 176, B = 240), with the timing of prebake 1 minute, exposure 7 minutes, postbake 5 minutes, developing 5 minutes produces the smallest profile 166 μm with 13,7 μm deviation. Biomachining process with bacteria Acidithiobacillus ferrooxidans NBRC 14262 on copper was also successfully performed with the smallest profile of 180 μm with 26 μm deviation.
APA, Harvard, Vancouver, ISO, and other styles
4

Wu, Chun-Ying, Heng Hsieh, and Yung-Chun Lee. "Contact Photolithography at Sub-Micrometer Scale Using a Soft Photomask." Micromachines 10, no. 8 (August 18, 2019): 547. http://dx.doi.org/10.3390/mi10080547.

Full text
Abstract:
This paper proposes a method for improving the patterning resolution of conventional contact photolithography from the micrometer, down to the sub-micrometer scale. The key element is a soft polydimethylsiloxane (PDMS) photomask, which is first replicated from a silicon mold and then patterned with a black photoresist (PR) layer to selectively block ultraviolet (UV) light. This soft PDMS photomask can easily form an intimate and conformable contact with a PR-coated substrate and hence can perform contact photolithography with high pattern resolution. The fabrication processes of this black-PR/PDMS soft photomask are experimentally carried out. Using the fabricated soft photomask, UV patterning by contact photolithography with the smallest line-width of 170 nm over a 4” wafer area was successfully achieved. The advantages and potentials of this new type of contact photolithography will be addressed.
APA, Harvard, Vancouver, ISO, and other styles
5

Critchley, Kevin, Lixin Zhang, Hitoshi Fukushima, Masaya Ishida, Tatsuya Shimoda, Richard J. Bushby, and Stephen D. Evans. "Soft-UV Photolithography using Self-Assembled Monolayers." Journal of Physical Chemistry B 110, no. 34 (August 2006): 17167–74. http://dx.doi.org/10.1021/jp0630370.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Horiuchi, S., T. Fujita, T. Hayakawa, and Y. Nakao. "Micropatterning of Metal Nanoparticles via UV Photolithography." Advanced Materials 15, no. 17 (September 3, 2003): 1449–52. http://dx.doi.org/10.1002/adma.200305270.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zaki, M., Uda Hashim, Mohd Khairuddin Md Arshad, M. Nurfaiz, M. F. M. Fathil, A. H. Azman, and R. M. Ayub. "Optimization on Conventional Photolithography Process of 0.98 μm Gap Design for Micro Gap Biosensor Application." Applied Mechanics and Materials 754-755 (April 2015): 524–29. http://dx.doi.org/10.4028/www.scientific.net/amm.754-755.524.

Full text
Abstract:
.Pattern design transfer is the most crucial step in fabrication. Even a small mistake in fabrication can result in device damage or poor performance. To ensure the device performs perfectly, exact design and dimension pattern should be perfectly transferred onto wafer substrate. In this paper, optimization of conventional photolithography process of 0.98μm gap design for micro gap biosensor application is presented. The micro gap pattern on chrome mask is used and the effect of coating profile, UV light, and Post Exposure Bake (PEB) process are investigated. The conventional photolithography process (using a micro gap mask) starts after the silicon oxide, polysilicon and aluminium have been deposited on top of the substrate. Each set of experiment conducted by pairing the element investigated coating profile, UV light, and PEB, with the normal specification of photolithography process. It was observed that 0.98μm gap size can be achieved by choosing suitable process parameters i.e. thickness of coating profile, time and temperature used for UV light and PEB.
APA, Harvard, Vancouver, ISO, and other styles
8

Lowe, Jimmy, Carl Bartels, and Steven Holdcroft. "Synthesis and properties of a sterically encumbered poly(thienylene vinylene): poly[E-1,2-(4,4prime-dihexyl-2,2prime-dithienyl)ethylene]." Canadian Journal of Chemistry 76, no. 11 (November 1, 1998): 1524–29. http://dx.doi.org/10.1139/v98-110.

Full text
Abstract:
Electrically conducting poly[E-1,2-(4,4prime-dihexyl-2,2prime-dithienyl)ethylene] was synthesized and structurally characterized by UV-visible, 1H NMR, and FTIR spectroscopy. The head-to-head arrangement of the alkylthiophene dyads directly affects the UV-visible, photoluminescence, and electroluminescence maxima of the polymer. The conductivity of the doped polymer was measured to be ~2 S cm-1 and the stability of the oxidized polymer possessing various dopants was compared. UV-visible irradiation of PDHDTE rendered the films insoluble and photolithography was used to produce micron-size images. FTIR was used to monitor the photoproducts during photolysis of PDHDTE. Mechanisms of photooxidation were proposed, based on the photoproducts observed.Key words: polythiophene derivative, head-to-head dyad, photolithography, photooxidation, electroluminescence.
APA, Harvard, Vancouver, ISO, and other styles
9

Roth, S., L. Dellmann, G.-A. Racine, and N. F. de Rooij. "High aspect ratio UV photolithography for electroplated structures." Journal of Micromechanics and Microengineering 9, no. 2 (January 1, 1999): 105–8. http://dx.doi.org/10.1088/0960-1317/9/2/001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Montague, Martha F., and Craig J. Hawker. "Secondary Patterning of UV Imprint Features by Photolithography." Chemistry of Materials 19, no. 3 (February 2007): 526–34. http://dx.doi.org/10.1021/cm0622102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "UV photolithography"

1

Liu, Chao. "Optical modeling and resist metrology for deep-UV photolithography." Texas A&M University, 2005. http://hdl.handle.net/1969.1/4233.

Full text
Abstract:
This thesis first presents a novel and highly accurate methodology for investigating the kinetics of photoacid diffusion and catalyzed-deprotection of positive-tone chemically amplified resists during post exposure bake (PEB) by in-situ monitoring the change of resist and capacitance (RC) of resist film during PEB. Deprotection converts the protecting group to volatile group, which changes the dielectric constant of resist. So the deprotection rate can be extracted from the change of capacitance. The photoacid diffusivity is extracted from the resistance change because diffusivity determines the rate of change of the acid distribution. Furthermore, by comparing the R and C curves, the dependence of acid diffusivity on reaction state can be extracted. The kinetics of non-Fickean acid transportation, deprotection, free volume generation and absorption/escaping, and resist shrinkage is analyzed and a comprehensive model is proposed that includes these chemical/physical mechanisms. Then in this thesis a novel lithographic technique, liquid immersion contact lithography (LICL) is proposed and the simulations are performed to illustrate its main features and advantages. Significant depth-of-field (DOF) enhancement can be achieved for large pitch gratings with deep-UV light (λ=248nm) illumination with both TM and TE polarizations by liquid immersion. Better than 100nm DOF can be achieved by when printing 70nm apertures. The simulation results show that it is very promising to apply this technique in scanning near field optical microscopy. Finally, a rigorous, full vector imaging model of non-ideal mask is developed and the simulation of the imaging of such a mask with 2D roughness is performed. Line edge roughness (LER) has been a major issue limiting the performance of sub-100nm photolithography. A lot of factors contribute to LER, including mask roughness, lens imperfection, resist chemistry, process variation, etc. To evaluate the effect of mask roughness on LER, a rigorous full vector model has been developed by the author. We calculate the electromagnetic (EM) field immediately after a rough mask by using TEMPEST and simulate the projected wafer image with SPLAT. The EM field and wafer image deviate from those from an ideal mask. LER is finally calculated based on the projected image.
APA, Harvard, Vancouver, ISO, and other styles
2

McAdams, Christopher Lee. "Polymers and photoactive compounds for non-chemically amplified deep-UV photoresists /." Full text (PDF) from UMI/Dissertation Abstracts International, 2000. http://wwwlib.umi.com/cr/utexas/fullcit?p3004335.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Regagnon, Théo. "Modélisation in vitro du muscle sur membrane silicone microstructurée par photolithographie UV." Electronic Thesis or Diss., Université de Montpellier (2022-....), 2023. http://www.theses.fr/2023UMONS073.

Full text
Abstract:
L'objectif du projet de thèse était de mettre au point un modèle in vitro de myotubes humains différenciés et alignés pouvant être soumis à une tension mécanique. Pour cela, un hybride organique-inorganique, l'EETMOS [2-(3,4 epoxycyclohexylethyltrimethoxysilane)] a été microstructuré par photolithographie UV sur une membrane en PDMS. Cela permet de créer un support flexible avec en surface des lignes parallèles entre elles pouvant être ensuite étiré et tout en favorisant l'alignement des myotubes.L'EETMol est le produit de synthèse sol-gel, une méthode de chimie douce, de l'EETMOS en milieu acide. Ce sol est ensuite déposé par spin coating sur la surface préalablement activée par traitement plasma du PDMS. Les lignes sont ensuite tracées par photolithographie UV avec un laser de haute précision. Les supports microstructurés sont ensuite biofonctionnalisés avec des ligands à base de peptides d'adhésion issus de la matrice extracellulaire. Ceux-ci ont été spécialement synthétisés pour présenter des groupements silylés en surface afin de générer des liaisons covalentes avec le PDMS ce qui permet d'assurer une accroche solide des myotubes au support.L'espacement entre les microstructures ainsi que leur hauteur ont été optimisés pour favoriser le développement des myotubes humains. Après optimisation et analyse par immunofluorescence, des myotubes avec un diamètre de 30µm ont été obtenus sur des supports dont la hauteur des microstructures est de 8µm et leur espacement de 75µm.Enfin, un protocole d'étirement mécanique a été mis au point (10% d'amplitude, 1Hz, deux cycles d'une heure d'étirement, deux heures de repos, une heure d'étirement, séparés par 20h de repos). Un effet sur l'expression de facteurs de transcription myogéniques (MoyG) et sur certaines protéines du sarcomère a été observé suggérant un effet positif de ce protocole d'étirement sur la différenciation des myotubes humains.Ce modèle pourrait être utiliser dans le screening de biomolécules ou pour l'évaluation chez des patients, après micro-biopsie, de leur réponse musculaire au stress mécanique
Our aim was to propose an in vitro model of differentiated and aligned human skeletal myotubes. To this end, we describe the micropatterning on a PDMS [poly(dimethylsiloxane)] substrate of EETMOS [2-(3,4 epoxycyclohexylethyltrimethoxysilane)] an organic-inorganic hybrid polymer to produce a network of parallel lines that can be stretchable to optimize differenciation.The EETMOS-based resin was synthesized by sol-gel process and polymerized using UV-photolithography. Human primary myoblasts were seeded onto the microstructurated substrate to be, after proliferation, stretched to differentiate into aligned myotubes.The effect of the spacing between the parallel lines and their height was assessed by immunofluorescence. After an optimization of the model, we ended up with 30µm large myotubes reached with a 75µm spacing and 8 µm high microstructures. Then we functionalized the silicone with the use of silylated peptide ligands derived from extracellular matrix adhesion proteins to avoid detachment of the myotubes from their support. A stretching protocol was then optimized (10% from L0, 1Hz, two cycles of 1h stretching / 2h rest / 1h stretching with 20h rest in between). An improvement in the expression of sarcomere proteins and myogenic regulatory factors (MyoG) was observed with stretching in relation to better differentiation of the myogenic progeniteur. The in vitro model that we propose would be a very useful tool to evaluate in a patient, from a microbiopsy, his muscular responses to mechanical stress
APA, Harvard, Vancouver, ISO, and other styles
4

Stehlin, Fabrice. "Photolithographie UV-profond d’oxoclusters métalliques : Des processus photochimiques aux applications en nanofabrication." Thesis, Mulhouse, 2013. http://www.theses.fr/2013MULH8376/document.

Full text
Abstract:
Le but principal de ce travail de thèse est de proposer un matériau précurseur d'oxydes métalliques (ZrO2, TiO2, HfO2) compatible avec la technique de photolithographie interférentielle DUV. Des oxoclusters de métaux (MOC) de transitions obtenus par complexation d’un ligand organique et hydrolysé partiellement ont été proposé comme briques élémentaires pour construire ces nanostructures. Le recours à des longueurs d'onde DUV (193 nm) permet d'exciter directement les MOC, ce qui conduit à une réticulation photoinduite, et confère à la résine un caractère de photoresist négatif. Une étude spectroscopique détaillée a permis de proposer un mécanisme de photoréticulation. Cette étude s'est appuyée essentiellement sur des techniques de suivi in situ de la réaction photochimique, par ellipsométrie spectroscopique et RT-FTIR. La nanostructuration a été effectuée essentiellement par lithographie interférométrique DUV (DUV-IL) à 193 nm et étendue à la stéréolithographie biphotonique. La DUV-IL a été choisie pour son potentiel d'écriture de nanostructures sur des surfaces relativement importantes, dans des conditions standard d'atmosphère et température. De plus, dans le cas des TiOC, les nanostructures peuvent être rendues inorganiques à température ambiante par un traitement photochimique supplémentaire. Dans le cas de ZrOC et HfOC, une étape supplémentaire de recuit thermique permet d'obtenir une structure de type MO2 cristallisée
The main purpose of this thesis is to provide a material precursor of metal oxides (ZrO2, TiO2, HfO2) compatible with DUV interference photolithography technique. Transition metal oxoclusters (MOC) obtained by complexation of an organic ligand and a partial hydrolysis have been proposed as building blocks. DUV irradiation (193 nm) allows a direct excitation of the MOC, which leads a photo-induced crosslinking and gives to the material a negative photoresist character. A detailed spectroscopic study allowed proposing a mechanism of photocrosslinking. This study relied primarily on in situ techniques to follow the photochemical reaction by spectroscopic ellipsometry and RT-FTIR. The nanostructuring was performed by interferometric DUV lithography at 193 nm and could be extended to 2-photon stereolithography. DUV-IL was chosen for its potential to write nanostructures on relatively large areas, in standard atmosphere and temperature conditions. Furthermore, in the case of TiOC, the nanostructures can be fully mineralised at room temperature by an additionnal photochemical treatment. For ZrOC and HfOC, an additional thermal annealing step allows to obtain a crystalline structure MO2
APA, Harvard, Vancouver, ISO, and other styles
5

Arbring, Theresia. "The impact of geometrical variations on the transport properties of organic electronic ion pumps." Thesis, Linköpings universitet, Fysik och elektroteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-94544.

Full text
Abstract:
The organic electronic ion pump (OEIP) is an electrically controlled polymer-based device that has the capability to interact with biological systems down to a single cell level by mimicking neural signalling. This is accomplished by translation of an electrical signal into a chemical output, such as ions and neurotransmitters. Because of the combined spatial and temporal precision, this is a technology with a promising future as an advanced therapeutic device. Depending on the application, the OEIP requires different geometries. Implants that will be used to control on a single cell level require very small dimensions, while for example extracorporeal mounted OIEPs, with only the delivery channel penetrating the skin, require much longer channels. Despite the application, it is necessary to have a good knowledge about the transport and delivery properties and how they change due to the geometry. These properties have been observed as very varying and unstable in early unpublished results, and these findings motivate this project. This project includes photolithographic fabrication and investigation of transport and delivery properties such as effective resistance, efficiency and stability of OEIPs with varying delivery channel lengths and widths. Shorter delivery channels show a consistent but relatively low efficiency. Delamination between different layers of the device is suspected as the cause. Initially, the longer delivery channels show a low functionality, most probably due to poor encapsulation. It is suggested that a soft, water-permeable plastic best encapsulates OEIPs that will be used as a medical implant, while a material impermeable to water, for example a metal, could successfully encapsulate OEIPs operating in air.
APA, Harvard, Vancouver, ISO, and other styles
6

Stehlin, Fabrice. "Photolithographie UV-profond d'oxoclusters métalliques : Des processus photochimiques aux applications en nanofabrication." Phd thesis, Université de Haute Alsace - Mulhouse, 2013. http://tel.archives-ouvertes.fr/tel-01067489.

Full text
Abstract:
Le but principal de ce travail de thèse est de proposer un matériau précurseur d'oxydes métalliques (ZrO2, TiO2, HfO2) compatible avec la technique de photolithographie interférentielle DUV. Des oxoclusters de métaux (MOC) de transitions obtenus par complexation d'un ligand organique et hydrolysé partiellement ont été proposé comme briques élémentaires pour construire ces nanostructures. Le recours à des longueurs d'onde DUV (193 nm) permet d'exciter directement les MOC, ce qui conduit à une réticulation photoinduite, et confère à la résine un caractère de photoresist négatif. Une étude spectroscopique détaillée a permis de proposer un mécanisme de photoréticulation. Cette étude s'est appuyée essentiellement sur des techniques de suivi in situ de la réaction photochimique, par ellipsométrie spectroscopique et RT-FTIR. La nanostructuration a été effectuée essentiellement par lithographie interférométrique DUV (DUV-IL) à 193 nm et étendue à la stéréolithographie biphotonique. La DUV-IL a été choisie pour son potentiel d'écriture de nanostructures sur des surfaces relativement importantes, dans des conditions standard d'atmosphère et température. De plus, dans le cas des TiOC, les nanostructures peuvent être rendues inorganiques à température ambiante par un traitement photochimique supplémentaire. Dans le cas de ZrOC et HfOC, une étape supplémentaire de recuit thermique permet d'obtenir une structure de type MO2 cristallisée.
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Xiyuan. "Design, analysis and fabrication of micro optical systems involving UV-deep lithography - with an application in atomic physics." [S.l. : s.n.], 2008. http://nbn-resolving.de/urn:nbn:de:bsz:180-madoc-21393.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Servera, Marc. "Etude d'un système de masquage pour microlithographie sensible en UV profond et développable par plasma d'oxygène." Montpellier 2, 1990. http://www.theses.fr/1990MON20092.

Full text
Abstract:
Un nouveau systeme de masquage pour microlithographie, sensible en uv profonde, a ete etudie. Sa composition originale fait intervenir un polymere methacrylique modifiable par acidolyse photoamorcee en presence de tosylate de benzoine. Cette resine est developpable en negatif par voie humide, en positif par plasma d'oxygene apres mise en uvre d'un procede de silylation selective. L'evaluation des performances microlithographiques a demontre dans les deux cas la faisabilite d'une resolution submicronique
APA, Harvard, Vancouver, ISO, and other styles
9

Yeh, Chun-Cheng. "ZnO micro- and nanostructures from Deep-UV photosensitive solutions for electronic and magnetic applications." Thesis, Mulhouse, 2017. http://www.theses.fr/2017MULH1359/document.

Full text
Abstract:
Ce travail a consisté à mettre au point et étudier des formulations à base d’un précurseur photosensible de Zn (Zinc méthacrylate, ZnMAA). Déposé sous forme de film mince, ce précurseur peut être réticulé par une irradiation dans l’UV profond (193 nm). Il est montré que la réticulation est la conséquence d’une décomposition photoinduite partielle des précurseurs, qui provoque des réactions de condensations, conduisant à la formation du réseau Zn-O-Zn. Cette réaction a été caractérisée par spectroscopie FTIR, XPS et ellipsométrie (chapitre III). Il est montré qu’elle est partielle mais efficace pour conférer au matériau un caractère de résine à tonalité négative, pouvant être utilisée en écriture laser directe. Des structures submicrométriques ont été préparées avec cette résine. Les différentes étapes du procédé de photolithographie sont discutées dans le chapitre IV. En particulier, l’étape de recuit thermique pour obtenir un matériau ZnO est étudiée pour expliquer son impact sur la géométrie des structures obtenues. Le matériau ZnO structuré par cette voie est utilisé enfin pour fabriquer des dispositifs : transistor, capteur de gaz, réseau à propriétés magnétiques, prouvant l’intérêt de cette approche de microstructuration basée sur un matériau préparé par voie liquide
In this thesis, an in-depth investigation to the photosensitive zinc methacrylate (ZnMAA) precursor was made. Zinc methacrylate can be crosslinked under DUV (193 nm) irradiation. The photo-induced solidification is attributed to the partial decomposition of the ZnMAA complex, which gives rise to the following hydrolysis-condensation reactions and the formation of Zn-O-Zn networks. The bonding variation and decomposition of organic species caused by DUV irradiation were carefully investigated by FTIR, XPS and ellipsometry and discussed in Chapter III. DUV irradiation provokes clivage of MAA ligands from zinc cations. However, the intensity of MAA ligands can only be reduced to ~2/3 of its initial intensity regardless the extension of irradiation time, implying only a small amount oxide network can be induced by DUV irradiation. The small amount of Zn-O-Zn networks inside the photo-irradiated regions can effectively decrease the solubility of photo-irradiated regions in polar solvents, which makes ZnMAA precursor just like a negative tone resist and able to be patterned into two-dimensional structures by DUV lithography. Due to good photosensitivity to DUV light (193 nm), the dimension of DUV-patterned ZnMAA structures can be decreased to sub-micro by using binary masks and the effects of each pattering step including (i) DUV exposure, (ii) prebaking and (iii) development on the size and shape of DUV-patterned ZnMAA structures are discussed in Chapter IV. In order to fabricate nanoscale ZnMAA structures, a home-made DUV interference system was used to pattern ZnMAA precursor and 300 nm periodic lines were successfully made. Applications as TFT transistor, gaz sensor and magnetic materials are shown
APA, Harvard, Vancouver, ISO, and other styles
10

Séméria, Marie-Noëlle. "Etude de circuits submicroniques implantés pour mémoire à bulles magnétiques." Grenoble 1, 1987. http://www.theses.fr/1987GRE10137.

Full text
Abstract:
La technologie necessaire a la realisation de memoires a bulles magnetiques implantees de haute densite (au moins 16 mb/cm**(2)) est etudiee sous differents aspects: le report de motifs submicroniques (0. 3-0. 8 mu m) necessite d'optimiser les moyens classiques de lithographie optique par contact ou projection. A cette fin, une modelisation est utilisee et des experiences comparatives realisees; la realisation des circuits comporte des implantations ioniques: differents materiaux de masque sont proposes (or, silice, polymere). Dans chacun des cas, des realisations concretes de masques graves sont effectuees et analysees; enfin des implantations hydrogene sont realisees. Le fonctionnement des dispositifs est correle aux parametres de l'implantation et au dessin des motifs. Des conclusions pratiques sont tirees sur l'implantation et la technologie compatibles avec un bon fonctionnement des dispositifs
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "UV photolithography"

1

Harned, Noreen. "Deep-UV photolithography cluster performance." In SPIE's 1994 Symposium on Microlithography, edited by Timothy A. Brunner. SPIE, 1994. http://dx.doi.org/10.1117/12.175487.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bauer, Harry H., Matthias Heller, and Norbert Kaiser. "Optical coatings for UV photolithography systems." In Optical Instrumentation & Systems Design. SPIE, 1996. http://dx.doi.org/10.1117/12.246823.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dunn, Diana D., Katherine C. Norris, and Linda K. Somerville. "0.5-um deep-UV photolithography manufacturing." In SPIE's 1994 Symposium on Microlithography, edited by Timothy A. Brunner. SPIE, 1994. http://dx.doi.org/10.1117/12.175464.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ruff, Bruce, Elizabeth Tai, and Robert Brown. "Broadband Deep-UV High NA Photolithography System." In 1989 Microlithography Conferences, edited by Burn J. Lin. SPIE, 1989. http://dx.doi.org/10.1117/12.953173.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dunn, Diana D., James A. Bruce, and Michael S. Hibbs. "Deep-UV photolithography linewidth variation from reflective substrates." In Optical/Laser Microlithography IV, edited by Victor Pol. SPIE, 1991. http://dx.doi.org/10.1117/12.44770.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yapici, Murat Kaya, and Ilyas Farhat. "UV-LED exposure system for low-cost photolithography." In SPIE Advanced Lithography, edited by Kafai Lai and Andreas Erdmann. SPIE, 2014. http://dx.doi.org/10.1117/12.2046123.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Du, Liqun, Shenmiao Zhu, Jiang Qin, and Chong Liu. "Numerical and experimental study on SU-8 UV photolithography." In 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, edited by Li Yang, Yaolong Chen, Ernst-Bernhard Kley, and Rongbin Li. SPIE, 2007. http://dx.doi.org/10.1117/12.783364.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

K M, Dhivakar, and Anshu Sarje. "A Versatile, Low-Cost UV Exposure System for Photolithography." In 2021 Smart Technologies, Communication and Robotics (STCR). IEEE, 2021. http://dx.doi.org/10.1109/stcr51658.2021.9588848.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Thackeray, James W., George W. Orsula, Edward K. Pavelchek, Dianne Canistro, Leonard E. Bogan, Jr., Amanda K. Berry, and Karen A. Graziano. "Deep UV ANR Photoresists For 248 nm Excimer Laser Photolithography." In 1989 Microlithography Conferences, edited by Elsa Reichmanis. SPIE, 1989. http://dx.doi.org/10.1117/12.953015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Spence, Chris, William G. Oldham, William N. Partlo, John H. Bruning, David A. Markle, and Richard Hsu. "Deep-UV Photolithography With a Small-Field 0.6 N.A. 'Microstepper'." In 1989 Microlithography Conferences, edited by Burn J. Lin. SPIE, 1989. http://dx.doi.org/10.1117/12.953176.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'UV photolithography' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography