Relevant bibliographies by topics / V-BENDING

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'V-BENDING'

Author: Grafiati
Published: 16 January 2024
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'V-BENDING.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "V-BENDING"

1

Doungmarda, Kongkiet, and Sutasn Thipprakmas. "A New Bending Force Formula for the V-Die Bending Process." Metals 13, no. 3 (2023): 587. http://dx.doi.org/10.3390/met13030587.

Full text
Abstract:
The V-die bending force is an important parameter in respect of press machine capacity selection, but it has not been the focus of previous research. Furthermore, while the various modified formulas proposed in previous research were calculated using V-die bending theory, they are insufficient for predicting the actual V-die bending force. Based on the actual V-die bending mechanism, a new V-die bending force formula is proposed in this study, in which bending is generated not only in the bending allowance zone but also on the legs next to the bending allowance zone. Therefore, the bending for
APA, Harvard, Vancouver, ISO, and other styles
2

Rian Kurniadi, Muhammad, Jatira Jatira, Khoirudin, et al. "Preliminary Study of the Spring-back/Spring-go Phenomenon in the V-Bending Process Using SGCC Steel Thin Material." Jurnal Teknik Mesin Mechanical Xplore 3, no. 2 (2022): 78–86. http://dx.doi.org/10.36805/jtmmx.v3i2.3370.

Full text
Abstract:
This research analyses v-bending results using galvanized SGCC (JIS G 3302) sheet steel. The accuracy of the angle and dimensions of the bending results are the significant elements of the bending process that must be achieved. The bending spring-back/spring-go phenomenon has an impact on bending angle accuracy. If proper parameters are chosen, the spring-tub/spring-go angle should be minimized. This study aimed to see how the proposed v-bending process affected the spring-tub/spring-go angle value. An experimental approach was selected in this study. V-die bending opening, V-die punch angle,
APA, Harvard, Vancouver, ISO, and other styles
3

OGAWA, Hideo, Kento SHIGEISHI, and Junichi KOYAMA. "Sheet Metal V-bending Without Springback." Journal of the Japan Society for Technology of Plasticity 47, no. 541 (2006): 144–48. http://dx.doi.org/10.9773/sosei.47.144.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kiswanto, Gandjar, Aida Mahmudah, and Dedi Priadi. "Preliminary Investigation of Micro-V-Bending." MATEC Web of Conferences 108 (2017): 06001. http://dx.doi.org/10.1051/matecconf/201710806001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhao, Jun, Chun Jian Su, and Ying Ping Guan. "Intelligent Control Experiment Study for V-Shape Free Bending of Wide Sheet Metal." Materials Science Forum 575-578 (April 2008): 186–91. http://dx.doi.org/10.4028/www.scientific.net/msf.575-578.186.

Full text
Abstract:
The main problem in bending process of sheet metal is that it is difficult to control bending springback accurately. Springback produced from the unloading of bending makes the shape and size incongruent between bending workpiece and working portion of die. Because the final shape of bending workpiece is related with the whole deformation process, the geometric parameter of die, material performance parameter will have great effect on springback. Therefore, the springback problem is very complicated and the prediction and control of springback is the key to improve the accuracy of bending work
APA, Harvard, Vancouver, ISO, and other styles
6

Sun, Zhen Zhong, Wei Feng He, Hai Bin Chen, Sheng Gui Chen, and Rong Yong Li. "Study on V-Bending of Aluminium Foam Sandwich Panels." Advanced Materials Research 181-182 (January 2011): 281–86. http://dx.doi.org/10.4028/www.scientific.net/amr.181-182.281.

Full text
Abstract:
The forming of the completed aluminium foam sandwich (AFS) panels would determine an improvement in the manufacturing of parts and panels. In this paper the authors have investigated the formability of AFS through experiments. the load versus punch stroke curve and deformation procedures of Aluminium foam sandwiche panels was investigated by performing V-bending experiments. A serious problem encountered in the V-bending was bending-induced large transverse shear deformation of the skin-core layer. It causes the delamination of the AFS. It was found from experimental observations that the larg
APA, Harvard, Vancouver, ISO, and other styles
7

Saito, Naoko, Mitsugi Fukahori, Daisuke Hisano, Yuya Ichikawa, Hiroshi Hamasaki, and Fusahito Yoshida. "Elasto-Plastic Property of High Strength Steel at Warm Temperature and its Springback." Key Engineering Materials 535-536 (January 2013): 385–88. http://dx.doi.org/10.4028/www.scientific.net/kem.535-536.385.

Full text
Abstract:
Stress-strain responses of a high strength steel sheet of 980MPa grade under uniaxial tension and its springback in V- and U-bending were investigated at elevated temperatures ranging from 573-973K. The flow stress decreased drastically with the increase of temperature, from which it was expected that springback is reduced by warm forming. In V-bending test, however, the temperature effect on springback was not so clear, while in U-bending springback decreased with temperature rise. It was found that such difference in temperature dependent springback behavior between V- and U-bending was caus
APA, Harvard, Vancouver, ISO, and other styles
8

SUYUTI, MUHAMMAD ARSYAD. "RANCANG BANGUN PRESS TOOL UNTUK ALAT BENDING PELAT TIPE DIE-V AIR BENDING." Machine : Jurnal Teknik Mesin 6, no. 1 (2020): 39–44. http://dx.doi.org/10.33019/jm.v6i1.1396.

Full text
Abstract:
Pekerjaan pembentukan logam (metal forming) pada industri permesinan maupun pabrikasi las saat ini sangat banyak permintaan khususnya pada pekerjaan yang memerlukan proses bending. Proses bending merupakan pembentukan logam yang umumnya menggunakan lembaran pelat atau batang, baik dari bahan logam ferro maupun logam non ferro dengan cara ditekuk, yang mana dalam proses pembengkokan akan menyebabkan terjadinya pemuluran atau peregangan pada sumbu bidang netral sepanjang daerah bendingan dan menghasilkan garis bending yang lurus. Penggunaan teknologi tepat guna telah banyak digunakan untuk menin
APA, Harvard, Vancouver, ISO, and other styles
9

Dullah, Muhammad Jufri, Muhammad Arsyad Suyuti, Sudarman Sudarman, Mariam Mariam, and Muh Azwar Arham. "Desain dan Analisis Alat Bending V Sistem Hidro Pneumatik." Jurnal Teknik Mesin Sinergi 17, no. 2 (2020): 168. http://dx.doi.org/10.31963/sinergi.v17i2.2079.

Full text
Abstract:
The design of the pneumatic hydro system V bending tool serves as an alternative tool for bending plates replacing the manual bending method which is widely used in the industrial community, especially machining workshop workshops today. In this design the hydraulic jack bender is driven by a pneumatic cylinder so that the workload of the operator is lighter. As for the results of this design and analysis, a V bending tool with 750 mm frame height, 650 mm frame width, 150 mm hydraulic stroke length, and 5 mm diameter spring pull wire are obtained. In addition, the punch angle is 85o and the pu
APA, Harvard, Vancouver, ISO, and other styles
10

Martynov, V. K. "Bending torsion in the V-belt drives." Izvestiya MGTU MAMI 9, no. 1-1 (2015): 65–71. http://dx.doi.org/10.17816/2074-0530-67226.

Full text
Abstract:
The paper deals with the possible appearance of bending torsion of belt in of belt transmissions, especially for wide variable with corrugations. For similar V-belts loading in transmission - as flexible rods of open profile - imposes its own specificity in considering of new torque to the defined in the existing theory based on the hypothesis of plane sections. Results increase opportunities for description of the processes in transmission, giving them proper assessment.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "V-BENDING"

1

Sarikaya, Onur Turgay. "Analysis Of Heat Treatment Effect On Springback In V-bending." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12610182/index.pdf.

Full text
Abstract:
Aluminum based alloys have wide area of usage in automotive and defense industry and bending processes are frequently applied during production. One of the most important design criteria of bending processes is springback, which can be basically defined as elastic recovery of the part during unloading. To overcome this problem, heat treatment is generally applied to the workpiece material to refine tensile properties. In this study, the effect of heat treatment on springback characteristics of aluminum studied both numerically by using finite element analysis and experimentally. For this purp
APA, Harvard, Vancouver, ISO, and other styles
2

Loth, Sebastian. "Atomic scale images of acceptors in III-V semiconductors band bending, tunneling paths and wave functions /." Göttingen : Univ.-Verl. Göttingen, 2008. http://d-nb.info/989995232/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Loth, Sebastian [Verfasser]. "Atomic scale images of acceptors in III-V semiconductors : band bending, tunneling paths and wave functions / Sebastian Loth." Göttingen : Univ.-Verl. Göttingen, 2008. http://d-nb.info/989995232/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wasserbauer, Jaromír. "Lokální zkoušky mechanických vlastností materiálů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2009. http://www.nusl.cz/ntk/nusl-216510.

Full text
Abstract:
This thesis deals with measurement of hardness and microhardness in relation to structure of homogeneous and heterogeneous materials. In the introduction basic theoretical background is commented, i.e. definitions, terminology, principles of measuring techniques for estimation of hardness, microhardness, tensile strength, compressive strength and bending strength. Follows a brief review of present research results focused on use of described principles in materials engineering. Then the experimental equipment and sample preparation is described. The crucial part of the thesis is summary of ach
APA, Harvard, Vancouver, ISO, and other styles
5

Myšičková, Lucie. "Vývoj a zkoušení vysokohodnotných betonů pro subtilní konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226971.

Full text
Abstract:
Thesis describes properties of HPC compared to concretes of normal and high strength. It further describes the input materials and the procedure for designing the composition of the mixture. It gives examples of already completed structures made of HPC. The experimental part describes the optimization of concrete mix and production of specimens. In the end results of testing the properties of the developed mixes from tests of dynamic and static modulus of elasticity, compressive strength and tensile strength by bending are described.
APA, Harvard, Vancouver, ISO, and other styles
6

Gottwaldová, Aneta. "Studium vlastností cementových kompozitů s rozptýlenou výztuží z anorganických vláken." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392335.

Full text
Abstract:
Diploma thesis deals with study of properties of cementious composites with fiber reinforcement from glass and basalt inorganic fibers. Diploma thesis includes a theoretical and experimental part. The theoretical part deals with information about glass and basalt fibers, their durability and usage. In the experimental part we monitored properfies of cement composites with basalt and glass fibers. Fibers were exposed to an aggressive environment. The properties of composites with reference fibers were compared with composites with fibers affacted by the aggressive environment. The properties of
APA, Harvard, Vancouver, ISO, and other styles
7

Fójcik, Tomáš. "Vliv triaxiální deformace kameniva na vlastnosti betonu." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2009. http://www.nusl.cz/ntk/nusl-216555.

Full text
Abstract:
This diploma work takes focus in elastic modulus of unbound granular aggregates, which was determined by repeat load triaxial test and in deformation behaviour of unbound granular aggregates - elastic and plastic deformation. It was examine the propriety of this aggregate for its service as underlying granular material in pavement. Further, there was observed the influence of elastic modulus of unbound granular aggregates on concrete characteristics - compressive and bending strength. Finally, it was observed the influence of individual fractions of aggregates on its elastic modulus and streng
APA, Harvard, Vancouver, ISO, and other styles
8

Vrtal, Roman. "Diagnostika poruch a vad podlah v bytové a občanské výstavbě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227022.

Full text
Abstract:
The object of the thesis is a description of preparation process, realization and subsequent treatment of floors based on calcium sulphate, including problems related to the issue. The aim of the work is to closely acquaint the reader with methods used in diagnostics of flooring failures and defects in the housing and civic construction, including practical applications of these methods on real structures. The work also includes experimental analysis of a real floor construction during local load effect.
APA, Harvard, Vancouver, ISO, and other styles
9

Šafář, Martin. "Vliv povlakování na lomové chování ledeburitické oceli." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229293.

Full text
Abstract:
This work deals with tool steel Vanadis 6. It describes the preparation of samples for the three-point bending test, with which it examines the influence of surface roughness, the effect of nitriding, coating and duplex coatings on fracture behaviour of the steel. First, it examines bending strength and the total energy required to work of fracture. The work also includes mapping and measurement of surface roughness on different layers. This measurement is performed on a confocal microscope.
APA, Harvard, Vancouver, ISO, and other styles
10

Dvořák, Richard. "Studium efektu aplikace celulózových vláken v cementových kompozitech." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240420.

Full text
Abstract:
This diploma thesis is focused on composition and processing of cellulose fibers and their usage in cementitious composites. It describes key attributes of cellulose fibers, which has to be acquired for effective use in cement composites. There are stated effects of cellulose fibers on concrete properties, such as workability, physical and mechanic attributes and freeze-thaw resistance. In experimental part is designed a mixture with portion of cellulose fibers. There has been performed various tests to define the effect of cellulose fibers. There was designed experiment to determine its alkal
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "V-BENDING"

1

Ginger, Ray. The bending cross: A biography of Eugene Victor Debs. Haymarket Books, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ginger, Ray. The bending cross: A biography of Eugene Victor Debs. Thomas Jefferson University Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bending Bodies: v. 2: Bending Bodies. Routledge, 2017. http://dx.doi.org/10.4324/9781315193960.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ginger, Ray. The Bending Cross: A Biography of Eugene Victor Debs. Haymarket Books, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "V-BENDING"

1

Jia, Yueqiao, and Jeffrey Choong Luin Chiang. "Finite Element Analysis of Punching Shear of Reinforced Concrete Mushroom Slab-Column Connections Using ABAQUS." In Advances in Frontier Research on Engineering Structures. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8657-4_8.

Full text
Abstract:
AbstractCapital is one of the common measures to strengthen the slab-column connections. It can make the joint's load capacity increase. However, when the connection is subjected to the unbalanced bending moment, the reduction effect of the capital on the bending moment is to be studied. Nonlinear finite element analysis is performed on reinforced concrete slabs with column capital for various moment-to-shear (M/V) ratios. The effect of capital radius on the punching shear resistance of slab-column connections is investigated. The 3D finite element modeling is performed using the concrete dama
APA, Harvard, Vancouver, ISO, and other styles
2

Jain, M. K., M. Marzouk, and S. Shankar. "Microstructure-Bendability Relationship in V-Bending of Cast Aluminum Alloy A356." In PRICM. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch418.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jain, M. K., M. Marzouk, and S. Shankar. "Microstructure-Bendability Relationship in V-Bending of Cast Aluminum Alloy A356." In Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48764-9_418.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hai, Vuong Gia, Hoang Van Quy, Nguyen Thi Hong Minh, and Nguyen Duc Toan. "Study on Predict Spring-Back in V-Bending of SS400 Steel Plate and Select Bending Parameters by Finite Element Method." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-31824-5_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yakuno, Ryunosuke, Hiroki Suwa, Kazuhito Takahashi, Shohei Kajikawa, Yasunori Yusa, and Takashi Kuboki. "Stress Relief for Crack Prevention by Adding Holes to V-Bending Die." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-42093-1_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hai, Vuong Gia, Nguyen Thi Hong Minh, Hoang Van Quy, and Nguyen Duc Toan. "Optimization of Predicting Spring-Back When V-Bending for SS400 Steel Plate." In Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020). Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69610-8_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bordry, F., L. Bottura, A. Milanese, et al. "Accelerator Engineering and Technology: Accelerator Technology." In Particle Physics Reference Library. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-34245-6_8.

Full text
Abstract:
AbstractMagnets are at the core of both circular and linear accelerators. The main function of a magnet is to guide the charged particle beam by virtue of the Lorentz force, given by the following expression:where q is the electrical charge of the particle, v its velocity, and B the magnetic field induction. The trajectory of a particle in the field depends hence on the particle velocity and on the space distribution of the field. The simplest case is that of a uniform magnetic field with a single component and velocity v normal to it, in which case the particle trajectory is a circle. A unifo
APA, Harvard, Vancouver, ISO, and other styles
8

Abe, Shinya, and Susumu Takahashi. "Influence of Forming Conditions to Springback in V-Bending Process Using Servo Press." In ICAA13: 13th International Conference on Aluminum Alloys. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495292.ch103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Abe, Shinya, and Susumu Takahashi. "Influence of Forming Conditions on Springback in V-bending Process Using Servo Press." In ICAA13 Pittsburgh. Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48761-8_103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hayakawa, Kunio, Yukio Sanomura, Mamoru Mizuno, Yukio Kasuga, and Tamotsu Nakamura. "Finite Element Analysis of V-Bending of Polypropylene Using Hydrostatic-Pressure Dependent Plastic Constitutive Equation." In Engineering Plasticity and Its Applications. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-433-2.1103.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "V-BENDING"

1

Lynh, Duong Huyen, and Tran Hai Nam. "Empowering Die Selection in V-Bending: Insights from Decision Tree Algorithms." In 2024 International Conference on Machining, Materials and Mechanical Technologies. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-epv4bq.

Full text
Abstract:
This study presents the application of tree-based algorithms to predict springback in the V-bending process of sheet metals, particularly for SUS304 material. V-bending, a critical process in metal forming, often faces challenges due to springback, which affects dimensional accuracy and product quality. Using virtual experiments conducted via ANSYS software, the study evaluates the influence of variables such as die angle, die radius, material thickness, and punch displacement on springback. Four tree-based algorithms—Decision Trees, Random Forest, Gradient Boosting Machines (GBM), and Extra T
APA, Harvard, Vancouver, ISO, and other styles
2

Le, Anh Chuong, Khai Le, Triet Hung Ho, Tran Anh Son, Quoc Nguyen Banh, and Minh Tuan Ho. "Effects of Groove Depth and Sheet Thickness on V-Bending Process Predicted by Finite Element Analysis." In 2024 International Conference on Machining, Materials and Mechanical Technologies. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-jlr02j.

Full text
Abstract:
Springback is a significant challenge that affects forming accuracy in the sheet metal industry. This phenomenon occurs because elastic materials tend to revert to their original shape after the removal of deforming forces, leading to differences between the desired and final shapes of the metal. Currently, two primary methods are employed to investigate springback: physical experiments and numerical simulations. Physical experiments involve actual deformation of sheet metals to observe and measure springback. While these experiments can provide useful data and insights, they are often time-co
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Qiang, Chun Yu Bai, and Bin Wen Wang. "Evolution Mechanism of Three-Point Bending Impact Fatigue Damage in Ultra-High Strength Steel 23Co14Ni12Cr3MoE Material." In The 12th International Conference on Fracture Fatigue and Wear. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-3eo2at.

Full text
Abstract:
Carrier-based aircraft takeoff and landing devices endure repeated high-speed, high-energy, and high-load impacts during operation. This repeated impact results in fatigue damage, a primary cause of failure in these devices, commonly known as impact fatigue. To address multiple impact fatigue failures in the takeoff and landing process of carrier-based aircraft, an investigation into the three-point bending impact fatigue characteristics of ultra-high-strength steel 23Co14Ni12Cr3MoE (abbreviated as A100 material) was conducted using experimental and microscopic techniques. A reproducible impac
APA, Harvard, Vancouver, ISO, and other styles
4

Caminada, S., G. Cumino, L. Cipolla, S. Tiberi Vipraio, and A. Di Gianfrancesco. "Long Term Properties and Microstructural Evolution of ASTM Grade 23." In AM-EPRI 2010, edited by D. Gandy, J. Shingledecker, and R. Viswanathan. ASM International, 2010. http://dx.doi.org/10.31399/asm.cp.am-epri-2010p0127.

Full text
Abstract:
Abstract ASTM Grade 23 is a 2.25Cr-0.3Mo-1.5W-V-Nb-B steel widely used for the fabrication of boiler components of the most recent ultra super critical power plants; it combines high creep resistance, enhanced oxidation and corrosion resistance and good weldability. Microstructural, mechanical, and creep properties of seamless tubes and pipes after normalizing and tempering heat treatment are compared with those obtained after cold bending and hot induction bending. The creep resistance is obtained through the precipitation of fine carbides after tempering. A broad program of TEM investigation
APA, Harvard, Vancouver, ISO, and other styles
5

Tawns, Alastair, and Robin Oakley. "Cathodic Protection at a Simulated Depth of 2500m." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00134.

Full text
Abstract:
Abstract The hydrogen embrittlement and cathodic protection characteristics of several subsea pipeline and flexible riser / hose steels were investigated in simulated deepwater service conditions. Static four-point bending loads were combined with an impressed potential of −1.1 V Ag/AgCl, at a pressure of 250 bar in a synthetic seawater solution. The experiment applied a static load to welded pipeline steel specimens and un-welded flexible hose armour wire specimens by four point bending. Sacrificial cathodic protection from aluminium bracelet anodes was simulated by a multi-channel potentiost
APA, Harvard, Vancouver, ISO, and other styles
6

Sherkar, Jagdish, Rajkumar Singh, Raju Kadam, Ganesh Jawale, and Ram Chandra Prasad. "The Effect of Plasma Nitriding on Fatigue and Wear Behavior of AISI 4330 Low Alloy Steel." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0137.

Full text
Abstract:
Abstract This paper investigates the effects of process time and temperature during plasma nitriding on the wear and fatigue properties of AISI 4330 steels. Nitriding, a thermochemical treatment involving nitrogen deposition and diffusion into metallic materials, has been widely used to enhance surface properties, wear resistance, fatigue strength, corrosion resistance, and friction characteristics of dynamically loaded components. The plasma nitriding process is conducted in a vacuum chamber where the specimen acts as a cathode, with high voltage (300-1000 V) applied between the cathode and t
APA, Harvard, Vancouver, ISO, and other styles
7

Moody, P., and Doosan Babcock. "Strain Induced Hardening of Advanced Austenitic Stainless Steels Evaluation of Creep Properties." In AM-EPRI 2010, edited by D. Gandy, J. Shingledecker, and R. Viswanathan. ASM International, 2010. http://dx.doi.org/10.31399/asm.cp.am-epri-2010p0933.

Full text
Abstract:
Abstract Cold working and bending during boiler manufacturing can induce strain hardening in austenitic stainless steel, potentially compromising creep ductility and leading to premature failures during operation. While design codes like ASME I, PG 19 provide guidelines for maximum strain levels before solution treating is required, industry concerns suggest these limits may be too high, prompting some boiler manufacturers to implement more conservative thresholds. This study examined the creep ductility of four austenitic stainless steels (TP310HCbN, XA704, TX304HB, and Sanicro 25) at prior s
APA, Harvard, Vancouver, ISO, and other styles
8

de Aguiar, João Batista. "V-BENDING MODEL APPLIED TO A ALUMINIUM STRIP." In COBEF 2019. ABCM, 2019. http://dx.doi.org/10.26678/abcm.cobef2019.cof2019-0407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

GÖRTAN, M. O. "Heat assisted V-bending characteristics of high strength S700MC steel." In Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-82.

Full text
Abstract:
Abstract. Increasingly stringent regulations force automotive manufacturers to reduce their product weights without compromising passenger safety. To overcome this problem, high strength steels are used that enable a higher payload capacity whilst reducing the plate thickness and overall weight. However, high strength steels are generally associated with lower formability and significantly greater springback compared to mild steels. In the current study, bendability characteristics of high strength S700MC steel in mild temperatures are investigated using V-bending tests. A temperature range be
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Fuh-Kuo, and Shen-Fu Ko. "Reduction of Springback in V-Bending by a Reverse Bend Approach." In SAE 2005 World Congress & Exhibition. SAE International, 2005. http://dx.doi.org/10.4271/2005-01-0087.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "V-BENDING"

1

Yoshizawa, Hideaki, Akira Usui, Souichiro Nishino, and Kunio Ohya. Evaluation of Shape Freezing Properties on Form Forming Method for High Tensile Steel Sheets (Comparison With V-Bending Process). SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0087.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Graville, B. A. PR-225-9516-R01 Hydrogen Cracking in the HAZ of High Strength Steels - Development of a Test Method. Pipeline Research Council International, Inc. (PRCI), 1996. http://dx.doi.org/10.55274/r0011702.

Full text
Abstract:
Cracking tests for evaluating the susceptibility of the heat affected zone (HAZ) to hydrogen cracking during welding often give ambiguous results because cracks occur in the weld metal rather than the HAZ. To solve this problem, a simple bend test was developed in which a Charpy V-notch was cut in the HAZ after welding the specimen thus ensuring cracks occurred in the desired location when the specimen was subsequently loaded in three-point bending. The test was shown to effectively respond to changes in hydrogen content and base metal composition. The test provides a quantitative measure of s
APA, Harvard, Vancouver, ISO, and other styles
3

Kramer, Wilkowski, and Maxey. L51514 Flow Tolerance of Spiral-Welded Line Pipe. Pipeline Research Council International, Inc. (PRCI), 1987. http://dx.doi.org/10.55274/r0011237.

Full text
Abstract:
The goals of this research program were to: (1) assess the mechanical and fracture properties of spiral-welded pipe, (2) characterize the crack initiation and maximum load carrying capacity, and (3) determine stress magnification factors for helical flaws. Flattened-strap tensile tests, Charpy V-notch (CVN) tests, and JIC fracture toughness tests were performed to meet the first objective. Results showed that tensile properties are independent of specimen orientation, while CVN data varied by as much as 3 to 1 for parallel vs. transverse machined specimens. Full-scale pipe fracture experiments
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'V-BENDING' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography