Log in

Relevant bibliographies by topics / V-CAD / Dissertations / Theses

To see the other types of publications on this topic, follow the link: V-CAD.

Dissertations / Theses on the topic 'V-CAD'

Author: Grafiati

Published: 3 June 2025

Last updated: 20 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'V-CAD.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Prokeš, Marek. "Modely elektrických přístrojů v moderních CAD systémech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217604.

Full text

Abstract:

In this master thesis the new possibilities of software Autodesk Inventor Professional 2008 are described. Autodesk Inventor is a system for 3D machine engineering containing tools for 3D modeling, information management, cooperation and technical support. Autodesk Inventor Professional 2008 has a lot of new possibilities and improvements compared to the previous version. This Master thesis contains also description of the circuit breaker BD250N and its utilization in the distribution of low voltage. In enclosed CD the model animation of circuit breaker with description of modeling process can

APA, Harvard, Vancouver, ISO, and other styles

2

Boattini, Marco. "Progetto e modellazione CAD di V-Drive per imbarcazione." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Find full text

Abstract:

Lo scopo della tesi è dimensionare un gruppo V-Drive per imbarcazioni, utilizzando le stesse soluzioni costruttive adottate commercialmente per gruppi di piccola potenza. Il V-drive è un meccanismo di rinvio che permette al motore di essere montato non più verso la prua della barca, ma spostato verso poppa, portando numerosi benefici al bilanciamento della stessa barca, alla vivibilità e ai volumi utilizzabili. Un gruppo V-drive originariamente montato su barche dotate di motore da 70 HP con 1800 rpm di giri elica, è stato ridimensionato in modo da tollerare fino a 260 HP sempre a 1800 rpm.

APA, Harvard, Vancouver, ISO, and other styles

3

Sedláček, Petr. "Pevnostní a modální analýza v parametrických adaptivních CAD programech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218805.

Full text

Abstract:

This thesis is focusing on the use of the finite element method (FEM) in program environment of Autodesk Inventor Professional (AIP) 2010. For the analysis of the components or assemblies with FEM serves the Strength analysis module of the AIP 2010, whose environment and functions are detailed in this thesis. At the conclusion practical examples of modal and static analysis on the synchronous generator rotor model are demonstrated including a brief evaluation of the results.

APA, Harvard, Vancouver, ISO, and other styles

4

Калінкевич, Микола Васильович, Николай Васильевич Калинкевич, Mykola Vasylovych Kalinkevych та ін. "Відеозаняття для навчання роботи з програмою "Turbocompressor CAD v 1.0"". Thesis, Видавництво СумДУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/19994.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Káčerik, Martin. "Rozšíření programu VRUT o zobrazovací plugin v rozhraní Vulkan." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2017. http://www.nusl.cz/ntk/nusl-363861.

Full text

Abstract:

The master’s thesis submitted deals with realtime rendering of three-dimensional CAD data using Vulkan API. The thesis also covers possibilities of connecting the API with VRUT, complex solution for renderig developed by ŠKODA AUTO a.s. Design of such connection is presented in form of Vulkan rendering plugin for VRUT application. Performance of the designed module is compared with another rendering module, based on different rendering technologies.

APA, Harvard, Vancouver, ISO, and other styles

6

Čech, Vojtěch. "Vyhodnocení vlivu tvaru dýzy na tlak v dráze primárního svazku elektronů v uzavřené variantě komory diferenciálního čerpání pomocí CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219195.

Full text

Abstract:

The semestral project will focus on using Computer Aided Engineering for analysis of the ESEM differential chamber. The instruments used for the analysis, evaluation and scrutiny of the given issue will be the CAD and CAE systems (Computer Aided Design and Computer Aided Engineering).

APA, Harvard, Vancouver, ISO, and other styles

7

Stručovský, Aleš. "Analýza rozložení teplotního profilu v pájecí peci pomocí systémů CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220122.

Full text

Abstract:

The aim of this project is using the CAE system to analyze the distribution of the temperature profile brazing furnace DIMA 0180. To create the model is used SolidWorks Premium 2012. The simulation is performed using the Flow Simulation. This work builds on the knowledge diploma thesis by Martin Procházka titled The effect of different heat capacities and components on the longitudinal temperature profile for reflow soldering. We start from the knowledge of heat transfer, especially of heat conduction and radiation, which appear in the furnace.

APA, Harvard, Vancouver, ISO, and other styles

8

Létal, Tomáš. "Softwarová podpora návrhu a hodnocení výměníků tepla se svazkem trubek v plášti." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-234237.

Full text

Abstract:

Subject of this work is a development of an integrated software environment for mechanical design and check of shell and tube heat exchangers. Processes of mechanical design and checks well as software which perform these processes are broken down to basic methods and parts. Mechanical design is usually performed according to some standards. In this work, ČSN EN 13445 is used. This standard describes mostly design check calculations which can be easily algorithmized. On the contrary, design calculations are described to some extent in few simple cases and mechanical design of shell and tube he

APA, Harvard, Vancouver, ISO, and other styles

9

Vyroubal, Petr. "Srovnání vlivu tvaru konvergentní a Lavalovy dýzy v clonkách detektoru na výsledný tlak na dráze sekundárních elektronů pomocí systému CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219192.

Full text

Abstract:

This master's thesis deals with influence of the shape comparison of convergent and Laval nozzles in the secondary electron detector shutters to the resulting pressure and gas flow in the secondary electron detector for environmental scaning electron mictoscope. To the detector analysis are used Computer Aided Engineering systems CAD and CAE, SolidWorks and SolidWorks Flow Simulation.

APA, Harvard, Vancouver, ISO, and other styles

10

Ambrož, Václav. "Analýza rozložení tlaků v detektoru SE pomocí systému Cosmos FloWorks." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217936.

Full text

Abstract:

The paper briefly outlines high-pressure electron microscopy and then uses SolidWorks to model the scintillation detector, analysing pumping of gas in the EREM sample chamber at different pressure levels using Cosmos FloWorks. The results of the analysis are assessed with regard to minimising pressure in the trajectory of the primary electron beam in order to prevent dissipation of electrons on the gas molecules.

APA, Harvard, Vancouver, ISO, and other styles

11

Nevařil, Jindřich. "Racionalizace výroby součásti v podniku Česká zbrojovka a.s." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229225.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Placzek, Roman. "Vliv tlaku v komoře vzorku na podmínky diferenciálního čerpání." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218730.

Full text

Abstract:

The paper primarily outlines fundamental issues of electron microscopy. The paper follows with analysing pumping of gas into EREM sample chambers at various pressure levels by using SolidWorks Flow Simulation in SolidWorks system. The results of analyses are assessed with respect to requirements so that the pressure in the track of primarily electrons is as low as possible with the view to reduce probability of its scattering.

APA, Harvard, Vancouver, ISO, and other styles

13

Kuglerová, Radka. "Implementace Modelu CAF v sektoru školství." Master's thesis, Vysoká škola ekonomická v Praze, 2006. http://www.nusl.cz/ntk/nusl-264.

Full text

Abstract:

Práce se snaží reagovat na aktuální otázku, týkající se modernizace veřejné správy a s ní spojenou aplikaci metod managementu kvality ve veřejné správě. Zvláštní pozornost je věnována Modelu CAF (Common Assessment Framework), který byl vyvinut jako nástroj sebehodnocení speciálně pro veřejný sektor. V České republice byl tento model doposud aplikován především na úrovni samosprávných a ústředních správních úřadů. Vzhledem k možnosti implementovat tento model v nejrůznějších částech veřejného sektoru, se práce snaží upozornit na vhodnost využití Modelu CAF i v oblasti vzdělávání. Pro jeho snazš

APA, Harvard, Vancouver, ISO, and other styles

14

Šanderová, Eva. "Implementace modelu CAF v místní správě." Master's thesis, Vysoká škola ekonomická v Praze, 2006. http://www.nusl.cz/ntk/nusl-265.

Full text

Abstract:

Práce je zaměřena na metody zlepšování kvality ve veřejné správě. První část je věnována modelu CAF - jeho výkladu a zavádění především do místní veřejné správy. Druhá část je orientovaná na implementaci tohoto modelu hodnocení v Čechách a na území Evropy.

APA, Harvard, Vancouver, ISO, and other styles

15

Nevřelová, Monika. "Datová kontinuita v projektování." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400902.

Full text

Abstract:

This work deals with the implementation of data continuity within the project documentation. This data continuity is implemented in order to follow the Industry 4.0 philosophy, already in the early design phase of the project. The project also gives an example of the implementation of the Internet of Things and the possibility of using it in industrial zones.

APA, Harvard, Vancouver, ISO, and other styles

16

Hladík, Jaroslav. "Vyhodnocení vlivu vzdálenosti clonek u sekundárního detektoru na tlak v komoře scintilátoru s ohledem na kritické proudění pomocí systému FloWorks." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218760.

Full text

Abstract:

This work follow up gas fluxion problems in detector chamber of enviromental scanning electron microscope. Describes basic electron microscopes characteristic and evaluation output signal. Basic focus of this work is proposal placing screening in detector in surroundings programme SolidWorks 2008. There is by the help of system COSMOS FloWorks effected analysis pumping gas with different pressure and mutual position which has significant influence in given fluxion conditions. Programmatic surroundings makes it possible to simulation 3D and evaluation fluxion method final capacities by setting

APA, Harvard, Vancouver, ISO, and other styles

17

Gulda, Jiří. "Řešení technologie při výrobě odlitku v malé strojírenské firmě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229485.

Full text

Abstract:

The dissertation work focuses on the design and optimization of the castings and foundry technology and the production a particular model for the casting. The technology proposal and the pattern set building in 3D using CAD system. The casting simulation in CAE MAGMAsoft® system and evaluation of the proposed casting technology. Production of the pattern using CAD/CAM software and CNC machine tools with a focus on 3-axis and 5-axis machining. The economic benefits for the company.

APA, Harvard, Vancouver, ISO, and other styles

18

Matloch, Roman. "Analýza nadzvukového proudění plynu v diferenciálně čerpané komoře elektronového mikroskopu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220123.

Full text

Abstract:

This work describes briefly electron microscopy issue and physical model of fluid flow. Then presented diploma thesis will be describing analysis and evaluation of the impact of supersonic flow on the pressure and density in the path of the primary electron beam in the differential pumping chamber. For analysis, evaluation and examination of the issue will be used CAD and CAE (Computer Aided Engineering) programs. At the same time it will be developed a methodology of calculation applicable to supersonic flow in the low pressure system at ANSYS CFX.

APA, Harvard, Vancouver, ISO, and other styles

19

Novotný, Marek. "Vyhodnocení vlivu tvaru otvorů clonek na výsledný tlak na dráze sekundárních elektronů v detektoru pomocí systému CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219193.

Full text

Abstract:

This diploma thesis deals with electron microscopy. Examined equipment is environmental scanning electron microscope (ESEM), namely scintillation a detector of the microscope. There is solved the influence of the profile of holes in diaphragms to the resulting pressure and gas flow on the path of secondary electrons at the detector. Introductory part of thesis informs about microscopy in general, with concentration on electron microscopy; especially on scanning microscope, because research is taken just on the environmental scanning electron microscope. Another part informs about both general

APA, Harvard, Vancouver, ISO, and other styles

20

Bordovský, Petr. "Vyhodnocení vlivu tlaku v komoře vzorku a velikosti clonek na výsledný tlak u scintilátoru detektoru pomocí systému Cosmos FloWorks." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218731.

Full text

Abstract:

This work deal with the analysis of influence of pressure‘s sizes in vacuum chamber of specimen Evironmental Scanning Electron Microscope and the influence of sizes of aperture diaphragm by scintillation detector. The analysis proceeds in detector of secondary electrons. The detector is modelled by system 3D CAD SolidWorks with the help of system CAE Cosmos FloWorks.

APA, Harvard, Vancouver, ISO, and other styles

21

Slabotinský, Filip. "Využití fotogrametrie v oboru znalectví ve stavebnictví a oceňování nemovitostí." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-233118.

Full text

Abstract:

The task of this diploma thesis is to design and test the optimal procedures for taking photos to build a 3D model of a civic building using the programme PHOTOMODELER. Then to determine the specific dimensions of the civic building and compare them with the dimensions received with the help of the basic method of measurement in common building practice, i.e. the method of cross directions (using a tape or a telescopic measuring rod) and the geodetic method of measurement. After that to evaluate these measurements and make the conclusion concerning the accuracy or inaccuracy of measurements re

APA, Harvard, Vancouver, ISO, and other styles

22

Yarzagaray, Antonio [Verfasser], and Dieter [Akademischer Betreuer] Bruns. "Functions of SNARE Regulators and v-SNARE Transmembrane Domain in Ca2+-triggered Exocytosis / Antonio Yarzagaray ; Betreuer: Dieter Bruns." Saarbrücken : Saarländische Universitäts- und Landesbibliothek, 2018. http://d-nb.info/1159569193/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Noremberczyk, Adam. "Automatická detekce ischemie v EKG." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241975.

Full text

Abstract:

This thesis discusses the utilization of the artificial neural networks (ANN) for detection of coronary artery disease (CAD) in frequency area. The first part of this thesis is orientated towards the theoretical knowledge. Describes the issue of ECG pathological changes. ECQ are converted to frequency area. Described statistical methods and methods for automatic detection of CAD and MI. Explained the issue of the perceptron and ANN. The second deals with use of Neural Network Toolbox MATLAB®. This part focuses on counting and finding suitable parameters and making connection of band. At the en

APA, Harvard, Vancouver, ISO, and other styles

24

Fňukal, Jan. "Deformační a napěťová analýza dolní čelisti s aplikovaným fixátorem v důsledku deficitu kostní tkáně." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318654.

Full text

Abstract:

This thesis deals with the fixation of lower jaw with bone tissue defect using commercially produced fixator. Large defects of bone tissue are mainly caused due to the removal of bone tissue affected by tumor. These topics have been researched on the basis of the literature. Subsequently, stress strain analysis of the lower jaw with the applied fixation plate was performed. This analysis was solved by using computational modeling with variational approach, ie the finite element method. The work also describes in detail the procedure of creating model of geometry, model of material, model of bo

APA, Harvard, Vancouver, ISO, and other styles

25

Lima, T?bata Lo?se Cunha. "Avalia??o do potencial antiviral da Annona muricata (Graviola) e Spondias mombin (Caj?) contra o v?rus dengue-2 em cultura de c?lulas." Universidade Federal do Rio Grande do Norte, 2015. http://repositorio.ufrn.br/handle/123456789/20322.

Full text

Abstract:

Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2016-04-25T23:51:26Z No. of bitstreams: 1 TabataLoiseCunhaLima_DISSERT.pdf: 1403767 bytes, checksum: 7424c70f286f04743b45ac7531e6829b (MD5)<br>Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2016-04-28T20:23:59Z (GMT) No. of bitstreams: 1 TabataLoiseCunhaLima_DISSERT.pdf: 1403767 bytes, checksum: 7424c70f286f04743b45ac7531e6829b (MD5)<br>Made available in DSpace on 2016-04-28T20:23:59Z (GMT). No. of bitstreams: 1 TabataLoiseCunhaLima_DISSERT.pdf: 1403767 bytes, checksum: 7424c70f286f04743

APA, Harvard, Vancouver, ISO, and other styles

26

Bezdíček, Jan. "Telemetrie pro formuli Dragon IV." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2014. http://www.nusl.cz/ntk/nusl-236045.

Full text

Abstract:

The aim of this master's thesis was to design and construct complete telemetry system for the student formula Dragon IV constructed for international Formula Student competition. At first, the work deals with the measurement of the physical quantities, telemetry system and automotive sensors of the formula, their mutual communication and communication with the CAN bus. It also describes the procedure of hardware design including choosing right inertial sensors and a GPS module and their using in telemetry system. The work contains materials for production of two-layer printed circuit board ext

APA, Harvard, Vancouver, ISO, and other styles

27

Gibaja, Bao Juan Francisco. "La función de los instrumentos líticos como medio de aproximación socio-económica. Comunidades del V-IV milenio cal BC en el noreste de la Península Ibérica." Doctoral thesis, Universitat Autònoma de Barcelona, 2002. http://hdl.handle.net/10803/5502.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Kresta, Martin. "Návrh zařízení pro demonstraci a testování produktu NCV7471." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220233.

Full text

Abstract:

Práce se zabývá návrhem automobilové elektronické řídicí jednotky (ECU) s funkcí partial networking definovanou normou ISO 11898-6. Cílem je navrhnout a vytvořit demonstrační ECU s použitím system basis chip NCV7471. Protože NCV7471 obsahuje standardní CAN transceiver, funkce partial networking je realizována pouze softwarem řídicí jednotky. Práce zvažuje možné způsoby realizace jak HW, tak SW části, tak aby byla zajištěna nízká spotřeba ECU v různých operačních módech, a snaží se sledovat současné trendy v automobilovém průmyslu.

APA, Harvard, Vancouver, ISO, and other styles

29

Benetka, Tomáš. "Příprava materiálů pro výuku softwarového nástroje Eplan." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377047.

Full text

Abstract:

This master’s thesis deals with the development of materials for classwork using EPLAN software tools for "XEPL" course. The introductory part describes issues with design in electrical engineering, with an emphasis on the formal aspects of project documentation standards and software tools for design support. Further in the thesis, there is an introduction to the EPLAN software environment. The EPLAN environment modules are presented one by one and the EPLAN Education software is introduced. The next part of this thesis involves a model project in designing electric installation of car washer

APA, Harvard, Vancouver, ISO, and other styles

30

Ozbey, Mehtap. "The Optical Spectroscopic And Photometric Observations Of The Optical Counterparts To The Be/x-ray Binary Systems: Gro J2058+42 And V0332+53." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609774/index.pdf.

Full text

Abstract:

The spectroscopic and photometric observations of the optical counterparts to the Be/X-ray binary systems GRO J2058+42 and V0332+53 (BQ Cam), taken with RTT150 (Russian-Turkish 1.5 meter Telescope), are presented in this study. The distance, color and the reddening estimates for both sources, obtained via photometric observations, are consistent with the previous results. The results of our spectroscopic observations performed between May 2006 and June 2008 for optical counterpart to GRO J2058+42 indicate that the double-peaked emission line profile turns into a single-peaked emission after th

APA, Harvard, Vancouver, ISO, and other styles

31

Angotti, Lauren Elizabeth. "Microtektites and other glasses from new sites in the Transantarctic Mountains, Antarctica." Case Western Reserve University School of Graduate Studies / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=case1573056026063929.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Pavlík, Marek. "Moderní přístupy v řízení organizací veřejné správy se zaměřením na projekty partnerství veřejného a soukromého sektoru." Doctoral thesis, Vysoká škola ekonomická v Praze, 2007. http://www.nusl.cz/ntk/nusl-163054.

Full text

Abstract:

This thesis is dedicated to modern management approaches to Public Sector organizations with a special focus on projects of Public Private Partnership. This topic is one of the latest issues not only in the Czech Republic but also in numerous European countries. The public sector and its organizations are going through total modernization in these countries. This results in higher quality and more effective Public Services for citizens. I view this problem from 2 perspectives and ask the following questions which reflect the main hypothesis of this thesis: which modern approaches (tools, metho

APA, Harvard, Vancouver, ISO, and other styles

33

Karch, Václav. "Vliv druhu vlastnictví bytové jednotky na obvyklou cenu v Třinci." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-367525.

Full text

Abstract:

A real property, an apartment, an accommodation unit, an ownership, cooperative housing, supply, demand, a price, a worth, a current price, a valuation using price provision, method of a direct comparison, yield method, real estate market

APA, Harvard, Vancouver, ISO, and other styles

34

Faruzel, Jiří. "Data mining v oblasti kurzového sázení 3. anglické fotbalové ligy." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-76605.

Full text

Abstract:

Thesis "Data Mining in the Field of English Football League Third Division's Betting Odds" deals with data mining referring to acquiring knowledge from data. The main objective of this work is to develop data models for prediction of match results and to compare these predictions with a chosen strategy of betting. The selected betting strategy is based on betting single bets with odds belonging to chosen intervals, which generate a profit. These odds intervals were discovered by analyzing 2006-2009 football matches in a created simulator. On the basis of these odds ranges data models were cons

APA, Harvard, Vancouver, ISO, and other styles

35

Kvasnička, Karel. "Mobilní zdroje elektrické energie." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Tunková, Martina. "Městské lázně." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2010. http://www.nusl.cz/ntk/nusl-215713.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Teng, Sin Yong. "Intelligent Energy-Savings and Process Improvement Strategies in Energy-Intensive Industries." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-433427.

Full text

Abstract:

S tím, jak se neustále vyvíjejí nové technologie pro energeticky náročná průmyslová odvětví, stávající zařízení postupně zaostávají v efektivitě a produktivitě. Tvrdá konkurence na trhu a legislativa v oblasti životního prostředí nutí tato tradiční zařízení k ukončení provozu a k odstavení. Zlepšování procesu a projekty modernizace jsou zásadní v udržování provozních výkonů těchto zařízení. Současné přístupy pro zlepšování procesů jsou hlavně: integrace procesů, optimalizace procesů a intenzifikace procesů. Obecně se v těchto oblastech využívá matematické optimalizace, zkušeností řešitele a pr

APA, Harvard, Vancouver, ISO, and other styles

38

Hýl, Petr. "Slovinské národní divadlo v Lublani." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2009. http://www.nusl.cz/ntk/nusl-215582.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Košková, Stanislava. "Hodnocení vybraných obsahových látek v ovoci metodou HPLC-DAD-CAD." Master's thesis, 2019. http://www.nusl.cz/ntk/nusl-397423.

Full text

Abstract:

Charles University Faculty of Pharmacy in Hradci Králové Deparment of Analytical Chemistry Candidate: Bc. Stanislava Košková Supervisor: Doc. PharmDr. Hana Sklenářová, Ph.D. Consultant: Ing. Radek Vávra, Ph.D. (VŠÚO Holovousy) Title of diploma thesis: Evaluation of selected substances in fruit by HPLC-DAD-CAD method Thisdiploma thesis was focused on determination of seven phenolic compounds, namely gallic acid, chlorogenic acid, epicatechin, rutin, phloridzin, quercetin, phloretin in twenty apple cultivars, that have been delivered by the Research and Breeding Institute of Pomology Holovousy s

APA, Harvard, Vancouver, ISO, and other styles

40

Šebelová, Eva. "Bytový nábytek v prostředí ložnic a jeho řešení od návrhu s využitím nadstaveb systému CAD." Master's thesis, 2011. http://www.nusl.cz/ntk/nusl-91158.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

FIKTUSOVÁ, Jana. "Vytvoření učebních podpor k předmětu "Počítačové modelování a výpočty v technice"." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-120243.

Full text

Abstract:

This diploma thesis offers to the reader the basic overview of the most used methods of computer simulation and accessible software which can be used for this purpose. The aim of the thesis is not a detailed description of individual procedures, but rather a creation of overview text which can be used by the reader as a material for the primary orientation to the given problems. The thesis is outlined as a proposal of the themes of lectures of the subject ?Computer simulation and calculations in technology?. The thesis is divided into three thematic blocks. In the first block, the reader is ac

APA, Harvard, Vancouver, ISO, and other styles

42

Bulín, Miroslav. "Využití software pro parametrické konstruování v nábytkářském průmyslu." Master's thesis, 2007. http://www.nusl.cz/ntk/nusl-94089.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Novotný, Lukáš. "Analýza nábytkových CNC obráběcích center v návaznosti na vlastní návrh a výrobu prototypu nábytku uzpůsobeného pro výrobu na CNC." Master's thesis, 2015. http://www.nusl.cz/ntk/nusl-190554.

Full text

Abstract:

The diploma thesis at first deals with the analysis of furniture CNC machining centers, which leads to the selection of the most suitable machine for a specific company. Second part of the thesis is to design furniture that is adapted for production on the furniture CNC machining center. Coffee table is chosen for design and manufacturing. The thesis contains both a theoretical study of the problems of CNC manufactured table furniture and practical part which describes the process of selection a suitable machine for a specific company and also describes whole process of creating a new furnitur

APA, Harvard, Vancouver, ISO, and other styles

44

Šeovićová, Maja. "Vliv chronického chladu na Ca2+-ATPázu (SERCA2) v srdci potkana." Master's thesis, 2021. http://www.nusl.cz/ntk/nusl-438406.

Full text

Abstract:

Acute cold exposure is a significant stressor activating heat production by shivering after the prolonged exposure cellular oxidative stress increases. Chronic exposure to cold lasting at least 2 weeks leads to the development of cold acclimatization. The main thermogenic role is taken over by non-shivering thermogenesis taking place in brown adipose tissue, which significantly increases its weight due to cold. Cardiac hypertrophy, hypertension and impaired renal function are frequently observed pathologies of acclimatization at 4-5 řC. Our laboratory recently introduced a model of mild chroni

APA, Harvard, Vancouver, ISO, and other styles

45

Fořtová, Veronika. "Podpora zdraví v lékárně." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-356251.

Full text

Abstract:

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Social and Clinical pharmacy Student: Veronika Fořtová Supervisor: Jitka Pokladníková Title of diploma thesis: Health promotion in community pharmacy The main aim of this diploma thesis is the evaluation of the questionnaire survey among the pharmacists in a relation to the alternative approaches to the health care, and the evaluation of the obstacles that are hindering greater development of these approaches. The theoretical part describes issues connected with health and health promotion. The next part is focus

APA, Harvard, Vancouver, ISO, and other styles

46

Saint, Paul Francisca v. [Verfasser]. "Integration of olfactory bulb output in the zebrafish telencephalon analyzed by electrophysiology and 2-photon Ca2+ imaging / presented by Francisca v. Saint Paul." 2009. http://d-nb.info/995810052/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Košťáková, Alžběta. "Mnohoproblémová rodina." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-358155.

Full text

Abstract:

The diploma work deals with the problems today's families suffer from, also deals with the support that can be given to dysfunctional families in the Czech Republic. Description of functional family and the family definition itself is the integral part of the diploma work. The text also brings information about criminal activities of under age children, CAN syndrome, divorce and about essential and important laws related to family problematics. The theoretical part is completed with practical examples obtained at interviews. The aim of the diploma work is to define and to analyze the problems,

APA, Harvard, Vancouver, ISO, and other styles

48

Uhrová, Tereza. "Psychosociální aspekty Huntingtonovy nemoci." Doctoral thesis, 2011. http://www.nusl.cz/ntk/nusl-299459.

Full text

Abstract:

Huntington's disease (HD) is an autosomal dominant inherited neuro-psychiatric disease with usual onset in the middle age. The mutation, located on the short shoulder of chromosome 4, is an expansion of a nucleotide triplet, containing cytosine, adenine, guanine (CAG), with critical limit of 40+ repetitions. The principal symptoms include motor symptoms (chorea, dystonia, disorders of voluntary movements), progressive cognitive deterioration and neuropsychiatric symptoms (behaviour disorders, affective symptoms and so on). The clinical diagnosis is confirmed by a genetic test, which may

APA, Harvard, Vancouver, ISO, and other styles

49

Polánková, Barbora. "Výchovně vzdělávací problémy dětí v obtížné životní situaci." Master's thesis, 2016. http://www.nusl.cz/ntk/nusl-353365.

Full text

Abstract:

This thesis is focused on educational problems of children in a difficult life situation. The theoretical part deals with social pedagogical concept of a difficult situation in life. It also goes about coping of those situations and their specifics in children. It focuses on child endangerment of his family background and its consequences and symptoms at school. It also describes the various teachers' approaches to the child's situation. The practical part using qualitative research methods, in-depth interviews and document analysis examines the concrete manifestation of difficult life situati

APA, Harvard, Vancouver, ISO, and other styles

50

HORČICOVÁ, Ivana. "Týrané, zneužívané a zanedbávané dítě." Master's thesis, 2007. http://www.nusl.cz/ntk/nusl-86147.

Full text

Abstract:

This dissertation is focused on some problems of maltreated, abused or neglected children and it also tries to outline a contemporary view of this situation. Considerable changes occured in this field after breaking a taboo on this subject, which is presented as a topic for a wide discussion. In my work I tried to give a complex view of some aspects of maltreated, abused or neglected children problems. Furthemore I focused on the problems of a public awareness concerning maltreated, abused or neglected children, and possible public activities in this field. I also investigated a public awarene

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!