To see the other types of publications on this topic, follow the link: Vacuum aggregate.

Journal articles on the topic 'Vacuum aggregate'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Vacuum aggregate.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Zhang, Tingting, Keyang Wu, Shuai Wang, Li Wang, Wei Yang, and Chen Qian. "Preparation Technology and Properties of Carbon-Reinforced Recycled Aggregate Concrete and Mortar." Science of Advanced Materials 14, no. 11 (2022): 1692–701. http://dx.doi.org/10.1166/sam.2022.4360.

Full text
Abstract:
Crushing the demolished waste concrete as aggregate to prepare fresh concrete may cause aggregate internal damage leading to strength reduction. To counter this issue, in the current study, the recycled aggregate is mixed with nano-calcium oxide in a vacuum reactor, and then a high concentration of carbon dioxide is introduced to fill the internal damages of the recycled aggregate. A layer of hydrophilic alkaline substance is formed on the surface of recycled aggregate to absorb carbon dioxide, which improves the strength of recycled aggregate particles and the bonding performance of aggregate
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Zhi, and Feng Zhu. "Study on Testing the Relative Density of Coarse Aggregate by Vacuum Method instead of Basket Method." Applied Mechanics and Materials 204-208 (October 2012): 872–76. http://dx.doi.org/10.4028/www.scientific.net/amm.204-208.872.

Full text
Abstract:
. In this paper, Vacuum Method was offered to test the relative density of coarse aggregate instead of basket method for the quick and exact mixture design of asphalt mixture. Firstly, the testing principle Vacuum Method was obtained by analyzing the experiment characteristic features of Vacuum Method and basket method. Secondly, the stability and accuracy of Vacuum Method were analyzed by testing the relative density of different kinds of coarse aggregate. Finally, the experiment conditions (the vacuum degree and pressure-holding time) were obtained through Comparison Experiment to the conven
APA, Harvard, Vancouver, ISO, and other styles
3

Jia, Zhiyou, José Aguiar, Sandra Cunha, and Carlos de Jesus. "Green Thermal Aggregates: Influence of the Physical Properties of Recycled Aggregates with Phase Change Materials." Materials 16, no. 18 (2023): 6267. http://dx.doi.org/10.3390/ma16186267.

Full text
Abstract:
Increasing construction and demolition waste (CDW) and the large amount of energy consumption in the building operation process are high-profile issues at present. In the construction industry, recycled aggregated (RA) from CDW can be reutilized in construction, along with green materials, for example, as a road base layer, as aggregate in concrete, etc. Phase change materials (PCM) are often used as building materials due to their good latent heat storage properties. With the use of RA as a matrix to absorb PCM, a thermal performance aggregate can be obtained. This work studied the physical p
APA, Harvard, Vancouver, ISO, and other styles
4

Dickson, E. L., V. Rasiah, and P. H. Groenevelt. "Comparison of four prewetting techniques in wet aggregate stability determination." Canadian Journal of Soil Science 71, no. 1 (1991): 67–72. http://dx.doi.org/10.4141/cjss91-006.

Full text
Abstract:
Variabilities in measured values of wet aggregate stability (WAS) of replicate samples of treatment exceeding that between treatments can create problems in interpreting treatment effects. The variabilities in WAS of replicate samples of treatment can be minimized by subjecting soil aggregates to a high vacuum fast prewetting technique. However, this technique is laborious and time consuming. In this paper the effect of four prewetting techniques: (1) and (2) high vacuum fast (HVFW) and slow (HVSW) wetting; (3) and (4) no vacuum (atmospheric) fast (NVFW) and slow wetting (NVSW) on the variatio
APA, Harvard, Vancouver, ISO, and other styles
5

Okechi, Ikechukwu K., Federico Aguayo, and Anthony Torres. "Coefficient of Thermal Expansion of Concrete Produced with Recycled Concrete Aggregates." Journal of Civil Engineering and Construction 11, no. 2 (2022): 65–74. http://dx.doi.org/10.32732/jcec.2022.11.2.65.

Full text
Abstract:
This study presents a comparison between the coefficient of thermal expansion (CTE) of concrete produced with natural aggregate and that of concrete produced with recycled concrete aggregate. In order to achieve this, natural aggregate concrete (NAC) specimens were produced, tested, then crushed and sieved in the laboratory to obtain recycled concrete aggregates, which was then used in the production of recycled aggregate concrete (RAC) specimens. The RAC samples were then tested and compared to the NAC samples. The CTE testing was carried out using a AFTC2 CTE measurement system produced by P
APA, Harvard, Vancouver, ISO, and other styles
6

Ding, Qing Jun, Xiu Lin Huang, Hua Sun, and Kun Yang. "Research on Function Aggregate Prepared by Steel Wastewater Sludge." Advanced Materials Research 168-170 (December 2010): 1625–30. http://dx.doi.org/10.4028/www.scientific.net/amr.168-170.1625.

Full text
Abstract:
Industrial wastewater sludge contains a certain amount of heavy metals, which will cause environmental pollution. In this paper high Cr, Zn content wastewater sludge from steel plant was used as the main raw material, with Kaolin and other materials as adjustment materials. Through optimization design of raw mix composition and firing system, a kind of function aggregate was got, which had an apparent relative density of about 3.0 g/cm3, a vacuum water absorption between 16%~23%, and a linear attenuation coefficient more than 0.15cm-1. Use XRD and SEM to analyze the existence state of heavy me
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Wen Bai, and Xia Li. "Experimental Study on Mechanical Properties of Recycled Concrete Specimens of Marine Engineering." Applied Mechanics and Materials 71-78 (July 2011): 331–37. http://dx.doi.org/10.4028/www.scientific.net/amm.71-78.331.

Full text
Abstract:
Mechanical properties of recycled concrete under different conditions were studied in this paper. Based on three kinds of replacement percentage of recycled aggregate and four kinds of seawater corrosion conditions, the experimental study of mechanical properties of recycled concrete specimens corroded by seawater and produced under vacuum conditions were conducted, and compared with that of ordinary concrete specimens. Testing results show that compressive strength of recycled concrete decreases with the increase of both the replacement rate of recycled aggregate and the corrosion time by sea
APA, Harvard, Vancouver, ISO, and other styles
8

Šesták, Ondřej, Pavel Matějka, and Blanka Vlčková. "The Model of Linear Aggregate of Ag Colloidal Particles with Variable Inter-Particle Distances." Collection of Czechoslovak Chemical Communications 61, no. 1 (1996): 59–69. http://dx.doi.org/10.1135/cccc19960059.

Full text
Abstract:
A simplified method of calculation of the surface plasmon energy states of the Ag colloidal aggregates characterized by varying inter-particle (inter-sphere) distance has been developed. Ag colloidal aggregate is approximated by a linear (one-dimensional) assembly of N silver spheres (of identical radii r and identical inter-sphere distances D) mutually interacting by a dipole-dipole interaction. The calculations use the following parameters: N from 1 to 25, r = 2, 5 and 10 nm, D = 0, 0.5, 1 and 2 nm, water and/or vacuum embedding media. The perturbation energies Vmin (stabilization energy) an
APA, Harvard, Vancouver, ISO, and other styles
9

Yannopapas, Vassilios, and Emmanuel Paspalakis. "Anisotropic Purcell Effect and Quantum Interference in Fractal Aggregates of Nanoparticles." Photonics 10, no. 8 (2023): 898. http://dx.doi.org/10.3390/photonics10080898.

Full text
Abstract:
We study theoretically the emergence of an anisotropic Purcell factor in random two-dimensional fractal aggregates of nanoparticles. These nanoparticles can either be metallic nanoparticles made of silver, which exhibit surface plasmon resonances, or high-index dielectric nanoparticles like silicon, which possess optical Mie resonances. To calculate the spontaneous emission rates of a quantum emitter, we utilize the electromagnetic Green’s tensor within the framework of the coupled-dipole method. Our findings reveal that the Purcell factor exhibits spatial variations, with certain regions, ref
APA, Harvard, Vancouver, ISO, and other styles
10

Guo, Xue Dong, Chun Mei Gao, Hao Wang, and Ming Liang Zhang. "The Research of Bituminous Mixture Water Stability Based on Aggregate Cleanness." Advanced Materials Research 255-260 (May 2011): 3297–301. http://dx.doi.org/10.4028/www.scientific.net/amr.255-260.3297.

Full text
Abstract:
Water stability of bituminous mixture, whose sediment concentration of coarse and fine aggregate are respectively in 1%, 2%, 3%, 4%, is tested and analyzed; meanwhile, under the condition of vacuum saturation, the water uptake and the residual water of bituminous mixture, whose sediment concentration of coarse and fine aggregate are respectively in 0%, 2%, 4%, are also tested. Based on the test, the tensile splitting strengths are analyzed, in correspondence to different water rates. Results show that the water stability of bituminous mixture reduces as the aggregate sediment concentration inc
APA, Harvard, Vancouver, ISO, and other styles
11

Potapov, D. I., I. V. Gorepekin, D. A. Ushkova, G. N. Fedotov, Yu P. Batyrev, and V. S. Shalaev. "Vibration amplitude effect on soil aggregates destruction when determining water stability by sieving method." Forestry Bulletin 26 (April 2022): 44–49. http://dx.doi.org/10.18698/2542-1468-2022-2-44-49.

Full text
Abstract:
The paper presents method to determine soil aggregates water stability. Its main stages are vacuuming of aggregates to eliminate the uncontrolled influence of trapped air on their destruction, subsequent saturation of aggregates with water in vacuum to values of soil moisture potential close to zero, and the use of vibration, to accelerate the destruction of aggregates. The influence of the vibration amplitude on the water stability of soil aggregates of the zonal series was studied using the developed method. It is shown that obtained curves have a general form for all the studied types of so
APA, Harvard, Vancouver, ISO, and other styles
12

Navozenko, Oleksandr, Valeriy Yashchuk, Oleksiy Kachkovsky, et al. "Aggregate Formation of Boron-Containing Molecules in Thermal Vacuum Deposited Films." Materials 14, no. 19 (2021): 5615. http://dx.doi.org/10.3390/ma14195615.

Full text
Abstract:
The spectral properties of new boron-containing dyes were studied. One-component (pure dyes) and composite “Alq3+dye” thin films were fabricated using the thermal vacuum deposition method. The positions of the transmission spectra maxima in a one-component film are different for different film thicknesses. The best correlation of the maxima positions of the dye transmission spectra in solid and liquid solutions was observed for thicknesses of films close to a few (up to 10) monolayers. On the other hand, the absorption spectra maxima positions of one-component dye films (upper 10 nm) and compo
APA, Harvard, Vancouver, ISO, and other styles
13

Yang, Z. X., Kyu Hong Hwang, Jeong Bae Yoon, J. O. Kim, and M. C. Kim. "Properties of Permeable Concrete Substrate Having Dual Pore Structures." Materials Science Forum 569 (January 2008): 233–36. http://dx.doi.org/10.4028/www.scientific.net/msf.569.233.

Full text
Abstract:
Porous concretes with continuous voids have been gaining more interest as an ecological material because of their useful functions such as water permeability and adsorption ability. Especially, to make porous concrete much more environmentalized, micropores play a role of nest for microorganism and germs to live in. So micropore distribution and the size of micropores especially open pores are the key point . In this study, the size and distribution of micropores of porous concrete were effected by the AE agents to the cement pastes and then by the treating types, treating times, treating temp
APA, Harvard, Vancouver, ISO, and other styles
14

Sholar, Gregory A., Gale C. Page, James A. Musselman, Patrick B. Upshaw, and Howard L. Moseley. "Investigation of the CoreLok for Maximum, Aggregate, and Bulk Specific Gravity Tests." Transportation Research Record: Journal of the Transportation Research Board 1907, no. 1 (2005): 135–44. http://dx.doi.org/10.1177/0361198105190700116.

Full text
Abstract:
The Florida Department of Transportation uses long-established test procedures to determine the maximum specific gravity (Gmm) and bulk specific gravity (Gmb) of asphalt mixtures and the bulk specific gravity (Gsb) of aggregates. The CoreLok, a vacuum-sealing device that can be used to determine these properties, was evaluated by the department for these test procedures. With respect to the Gmm test procedure, for mixtures containing nonabsorptive granites, the CoreLok determined results equivalent to those of the department's test procedure. However, for mixtures containing absorptive limesto
APA, Harvard, Vancouver, ISO, and other styles
15

Gao, Jin Hai, Wu Qing Zhang, and Zhen Li. "Synthesis and Field Emission Properties of Diamond Microcrystalline-Aggregate Array." Advanced Materials Research 664 (February 2013): 596–99. http://dx.doi.org/10.4028/www.scientific.net/amr.664.596.

Full text
Abstract:
The diamond microcrystalline-aggregate array was fabricated by microwave plasma chemical vapor deposition (MPCVD) method. The ceramic with a Ti mental layer is used as substrate. The diamond array was evaluated by Raman scattering spectroscopy, x-ray diffraction spectrum (XRD), scanning electron microscopy (SEM). The field emission properties were tested by using a diode structure in a vacuum. A phosphor-coated indium tin oxide (ITO) anode was used for observing and characterizing the field emission. It was found that the diamond microcrystalline-aggregate array exhibited better electron emiss
APA, Harvard, Vancouver, ISO, and other styles
16

Ueda, Yasukiyo, Kuniyuki Nitta, Yohei Aritoshi, and Zhenguo Ji. "XPS Study on J-Aggregate of Merocyanine Film Prepared by Vacuum Deposition." Molecular Crystals and Liquid Crystals 377, no. 1 (2002): 149–52. http://dx.doi.org/10.1080/713738494.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Gao, Jin Hai, Wu Qing Zhang, and Zhen Li. "The Field Emission of Globe-Like Diamond Microcrystalline Aggregate Films." Advanced Materials Research 279 (July 2011): 88–92. http://dx.doi.org/10.4028/www.scientific.net/amr.279.88.

Full text
Abstract:
The globe-like diamond microcrystalline aggregates films were fabricated by microwave plasma chemical vapor deposition method. The field emission properties and emission stability of the films were tested using a diode structure in vacuum. It was found that the globe-like diamond microcrystalline aggregates films exhibited good electron emission properties and stability. The turn-on field of 0. 55 V /μm and the current density of 11mA/cm2 at the electric fields of 2.73V/μm were obtained. At the successive operator circles, the turn-on field tends to stabilize at 1. 08V /μm and the current dens
APA, Harvard, Vancouver, ISO, and other styles
18

Yang, Wei Bo, Chao Peng, Gui Qiang Li, et al. "Properties Characterization of MgO-Cr2O3-ZrO2 Brick Prepared by Vacuum Impregnation." Key Engineering Materials 726 (January 2017): 394–98. http://dx.doi.org/10.4028/www.scientific.net/kem.726.394.

Full text
Abstract:
MgO-Cr2O3-ZrO2 bricks were prepared by impregnated MgO-Cr2O3 refractory into ZrOC12·8H2O solution in vacuum condition. Then the properties of MgO-Cr2O3-ZrO2 bricks were researched in this study. The results showed that the properties of the MgO-Cr2O3-ZrO2 bricks, such as bulk density, cold crushing strength, pore distribution, are superior to those of the MgO-Cr2O3 refractory. The ZrO2 introduced to MgO-Cr2O3-ZrO2 bricks by vacuum impregnation method were distributed in reunion in the aggregate and matrix combining site and cracks and pores of the matrix of MgO-Cr2O3-ZrO2 bricks, which can sig
APA, Harvard, Vancouver, ISO, and other styles
19

Blacha, Leszek, Albert Smalcerz, Bartosz Wecki, Jerzy Labaj, Debela Geneti Desisa, and Maciej Jodkowski. "Comparative Analysis of Lead Removal from Liquid Copper by ICF and CCF Refining Technologies." Materials 15, no. 19 (2022): 7024. http://dx.doi.org/10.3390/ma15197024.

Full text
Abstract:
Innovative technologies require the use of materials that meet increasingly high requirements; one such requirement is the purity of metals. In the case of copper, this translates into a parameter related to electrical conductivity. Traditional metal refining technologies have some limitations that can be eliminated through the use of modern melting aggregates. Such solutions include vacuum induction furnaces, comprising an induction furnace with a cold crucible. As part of this work, the possibilities of refining copper and lead alloys were investigated. In addition, the research was carried
APA, Harvard, Vancouver, ISO, and other styles
20

Ushkova, D. A., U. A. Konkina, I. V. Gorepekin, D. I. Potapov, E. V. Shein, and G. N. Fedotov. "Stability of Arable Soil Aggregates: Experimental Determination and Normative Characteristics." Почвоведение, no. 2 (February 1, 2023): 203–10. http://dx.doi.org/10.31857/s0032180x22600834.

Full text
Abstract:
Soil stability in modern soil physics is divided into two directions: water stability and resistance to mechanical influences (compression, wedging). Both soil properties in water-saturated soil are based on the rupture of intra-aggregate interparticle bonds, however, no standard physically justified values have been proposed to characterize the stability of aggregates. The purpose of the article is to substantiate the physical concept of stability of soil aggregates and to propose a single methodological method for quantifying stability as a normative soil characteristic. A high-performance m
APA, Harvard, Vancouver, ISO, and other styles
21

Cruz, J. C., S. M. Hernandez, D. L. Trejo-Arroyo, et al. "Evaluation of self-healing in concrete with limestone coarse aggregate impregnated with Na2SiO3 solution." Materials Research Express 9, no. 2 (2022): 025506. http://dx.doi.org/10.1088/2053-1591/ac513d.

Full text
Abstract:
Abstract This study investigated the self-healing process in concrete using limestone coarse aggregate impregnated with sodium silicate solution and encapsulated with polyvinyl alcohol (PVA). It discussed the self-healing mechanism by sodium silicate solution and evaluated the effect and the efficiency of this healing agent. To do this, limestone coarse aggregate was vacuum impregnated with a sodium silicate solution, encapsulated with PVA, and mixed into the concrete paste. The compressive strength was improved up to 50% in the concrete samples with sodium silicate. It also evaluated the poro
APA, Harvard, Vancouver, ISO, and other styles
22

Dogan, Ali, and Nurullah Karaca. "Experimental and theoretical behavior of cementitious plates containing ethylene vinyl acetate reinforced with glass woven fabric under impact load." Materials Science-Poland 39, no. 4 (2021): 491–506. http://dx.doi.org/10.2478/msp-2021-0041.

Full text
Abstract:
Abstract The paper is an analysis of the experimental and theoretical behavior of cementitious plate containing waste ethylene vinyl acetate (EVA) with and without reinforcement with glass fiber woven fabric (GFRP) under low-velocity impact load effect. Cementitious plates of 150 mm × 150 mm size and three different thicknesses (15 mm, 30 mm, 50 mm) are produced by replacing the cement mixture aggregate with EVA at 0%, 18%, 32%, 45%, and 56% by volume of aggregate. Then, the cementitious plates are coated with GFRP using vacuum infusion method. The effect of EVA and GRFP coatings on the dynami
APA, Harvard, Vancouver, ISO, and other styles
23

Khubaev, Alan, Tembot Bidov, and Alina Rybakova. "Analysis of physical and mechanical properties of vacuum treated claydite-concrete." MATEC Web of Conferences 196 (2018): 04071. http://dx.doi.org/10.1051/matecconf/201819604071.

Full text
Abstract:
In this article the analysis of the impact of some physical and mechanical properties of vacuum treated claydite-concrete is presented. The work purpose is to describe in detail the results of the experimental and analytical studies of the claydite-concrete composition influence on the vacuum treatment intensity and amount of removed water. These results are obtained by solving the following problems: compressive strength investigation of the claydite-concrete samples; consideration of the phenomenon of "self-vacuuming treatment" of the porous aggregate as a factor, promoting claydite-concrete
APA, Harvard, Vancouver, ISO, and other styles
24

Alimuradov, Sh A., A. M. Gadzhiev, Kh N. Khadzhishalapov, and T. A. Hezhev. "EFFECT OF VACUM TREATMENT ON TECHNOLOGICAL PROPERTIES OF HEAT-RESISTANT CERAMZYT-CONCRETE ON COMPOSITIONAL BINDING." Herald of Dagestan State Technical University. Technical Sciences 46, no. 2 (2019): 158–66. http://dx.doi.org/10.21822/2073-6185-2019-46-2-158-166.

Full text
Abstract:
Objectives The aim of the study is to study the effect of vacuum treatment, heating temperature, mixing time and load force on the strength of heat-resistant expanded clay concrete for lining thermal units.Method The study is based on the vacuum processing technology of heat-resistant concrete based on a composite binder for lining the hearth of a trolley of a brick kiln, vacuum-packed concrete mix.Result The effect of vacuum processing of the mixture on the technological properties of heat-resistant expanded clay concrete on a composite binder made from Portland cement and finely ground expan
APA, Harvard, Vancouver, ISO, and other styles
25

Danz, Mari, William Selbig, and Nicolas Buer. "Assessment of Restorative Maintenance Practices on the Infiltration Capacity of Permeable Pavement." Water 12, no. 6 (2020): 1563. http://dx.doi.org/10.3390/w12061563.

Full text
Abstract:
Permeable pavement has the potential to be an effective tool in managing stormwater runoff through retention of sediment and other contaminants associated with urban development. The infiltration capacity of permeable pavement declines as more sediment is captured, thereby reducing its ability to treat runoff. Regular restorative maintenance practices can alleviate this issue and prolong the useful life and benefits of the system. Maintenance practices used to restore the infiltration capacity of permeable pavement were evaluated on three surfaces: Permeable interlocking concrete pavers (PICP)
APA, Harvard, Vancouver, ISO, and other styles
26

Beliuchenko, Dmytro, Kateryna Tishechkina, Tetiana Hannichenko, and Olga Salamatina. "Study of Humidity During Sand Dewatering Using a Cone-Shaped Installation." Key Engineering Materials 953 (August 25, 2023): 43–51. http://dx.doi.org/10.4028/p-tog6wu.

Full text
Abstract:
The issue of moisture content of sand, which is used in construction as an aggregate for asphalt concrete mixtures, in the production of silicate building materials, roofing roll materials, and various types of glass, is considered. The results of an experimental study of the process of dewatering construction sand samples in conical warehouses under the conditions of using vacuum systems, depending on the time and placement scheme of needle filters, are presented.
APA, Harvard, Vancouver, ISO, and other styles
27

Jiang, Wenping, Pal Molian, and Hans Ferkel. "Rapid Production of Carbon Nanotubes by High-Power Laser Ablation." Journal of Manufacturing Science and Engineering 127, no. 3 (2004): 703–7. http://dx.doi.org/10.1115/1.1961983.

Full text
Abstract:
Carbon nanotubes were synthesized in an atmospheric chamber by irradiating a metal-catalyst containing graphite target with a 2 kW continuous wave CO2 laser and capturing the soot in flowing distilled water to facilitate continuous, rapid production. The ablation products, swept away by an argon flow and collected in the distilled water, were further purified to result in a yield of 50%. The growth rate of purified aggregate ranged from 0.5 to 2g∕h depending on the laser power. Microscopic scanning electron microscopy, atomic force microscopy, transmission electron microscopy and spectroscopic
APA, Harvard, Vancouver, ISO, and other styles
28

Gonçalves, Valéria S., Cláudio José da Rocha, and Ricardo Mendes Leal Neto. "Mechanical Activation of Nb75Al Powder Mixtures with Different Process Control Agents." Materials Science Forum 591-593 (August 2008): 160–67. http://dx.doi.org/10.4028/www.scientific.net/msf.591-593.160.

Full text
Abstract:
The behavior of different process control agents (PCAs) during mechanical activation of Nb75Al powder mixtures was investigated. Mechanical activation by high-energy ball milling was carried out on a shaker mill (SPEX®8000) for 1 hour. Each PCA (Stearic acid, ethanol and methanol) was added to the powder charge in two proportions (1 and 2 wt%). Shape and microstructure of activated powders (aggregates) were analyzed by scanning electron microscopy. Milled powder mixtures were uniaxially pressed in cylindrical compacts that were further vacuum reacted at a constant heating rate (30°C/min) in or
APA, Harvard, Vancouver, ISO, and other styles
29

Poenaru, I. O., E. Ardelean, A. Budiul Berghian, M. Magaon, and Z. Trisovic. "Research regarding oxygen content reduction in steels." Journal of Physics: Conference Series 2714, no. 1 (2024): 012024. http://dx.doi.org/10.1088/1742-6596/2714/1/012024.

Full text
Abstract:
Abstract Actual paperwork reflects obtained results of technological analyse of reducing oxygen content in steel for pipe manufacturing, enterprised in a steel furnance equipped with a triple aggregate EAF-LF-VD. Oxygen content was measured during manufacturing process in Loading Furnance and Vacuum Degasing and has been analysed in comparison with several parameters. The results are presented using Matlab through regression surfaces and correlation equations and highlights the influence of analysed factors on oxygen content variation in steel.
APA, Harvard, Vancouver, ISO, and other styles
30

Bogdan, T., C. Pillich, J. Landers, H. Wende, and G. Wurm. "Drifting inwards in protoplanetary discs I Sticking of chondritic dust at increasing temperatures." Astronomy & Astrophysics 638 (June 2020): A151. http://dx.doi.org/10.1051/0004-6361/202038120.

Full text
Abstract:
Sticking properties rule the early phases of pebble growth in protoplanetary discs in which grains regularly travel from cold, water-rich regions to the warm inner part. This drift affects composition, grain size, morphology, and water content as grains experience ever higher temperatures. In this study we tempered chondritic dust under vacuum up to 1400 K. Afterwards, we measured the splitting tensile strength of millimetre-sized dust aggregates. The deduced effective surface energy starts out as γe = 0.07 J m−2. This value is dominated by abundant iron-oxides as measured by Mössbauer spectro
APA, Harvard, Vancouver, ISO, and other styles
31

SAKANISHI, Kinya, Toru MANABE, Izumi WATANABE, and Isao MOCHIDA. "Changes in Molecular Aggregate of Vacuum Residue Fractions Analyzed by Slow Step Scan XRD." Journal of The Japan Petroleum Institute 43, no. 1 (2000): 10–16. http://dx.doi.org/10.1627/jpi1958.43.10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

GÖKOĞLU, GÖKHAN, and TARIK ÇELİK. "CONFORMATION AND PHASE TRANSITION OF POLY-GLUTAMINE." International Journal of Modern Physics C 17, no. 02 (2006): 235–46. http://dx.doi.org/10.1142/s0129183106008893.

Full text
Abstract:
In order to provide insights into the misfolding mechanism and the subsequent aggregate formation which cause what are known as the neurodegenerative polyglutamine diseases, we have simulated a 10-residue polyglutamine (poly-Q) chain in vacuum and in solvent by multicanonical method, which enabled us to study the system in a wide temperature range and discuss thermodynamic properties. It is understood that the system in vacuum shows two phase transitions, first of them occur at high temperature that is the well-known helix-coil transition and the second one is a solid-solid transition. However
APA, Harvard, Vancouver, ISO, and other styles
33

Ivanova, Yulia B., Nugzar Zh Mamardashvili та Natalya E. Kochkina. "AGGREGATION OF MS-MONOPYRIDYL-Β-OCTAALKYLPORPHYRINS IN DICHLOROMETHANE IN PRESENCE OF Pd(II)". IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA 63, № 11 (2020): 35–40. http://dx.doi.org/10.6060/ivkkt.20206311.6252.

Full text
Abstract:
Aggregation of 13,17-diethyl-2,3,7,8,12,18-hexamethyl-5-(pyridin-4-yl) porphyrin (I), 13,17-diethyl-2,3,7,8,12,18-hexamethyl-5-(pyridin-3-yl)porphyrin (II) and 13.17-diethyl-2,3,7,8,12,18-hexamethyl-5-(pyridin-2-yl)porphyrin (III) in the presence of trans-bis(benzonitrile)palladium(II) dichloride was studied by dynamic light scattering and electronic absorption spectroscopy in dichloromethane at 293 K. The average aggregate size and the nature of their distribution were determined. Using scanning electron microscopy, it was determined the size and composition of clusters formed by aggregates o
APA, Harvard, Vancouver, ISO, and other styles
34

Rahim, Nur Liza, Roshazita Che Amat, Norlia Mohamad Ibrahim, Shamshinar Salehuddin, Syakirah Afiza Mohammed, and Mustaqqim Abdul Rahim. "Utilization of Recycled Glass Waste as Partial Replacement of Fine Aggregate in Concrete Production." Materials Science Forum 803 (August 2014): 16–20. http://dx.doi.org/10.4028/www.scientific.net/msf.803.16.

Full text
Abstract:
Glass dust waste creates chronic environmental problems, mainly due to the inconsistency of waste glass streams. Glass is widely used in our lives through manufactured products such as sheet glass, bottles, glassware, and vacuum tubing. Glass is an ideal material for recycling. The use of recycled glass helps in energy saving. The increasing awareness of glass recycling speeds up inspections on the use of waste glass with different forms in various fields. One of its significant contributions is to the construction field where the waste glass was reused for concrete production. The properties
APA, Harvard, Vancouver, ISO, and other styles
35

Quezada, Gonzalo R., Matías Jeldres, Pedro Robles, Norman Toro, David Torres, and Ricardo I. Jeldres. "Improving the Flocculation Performance of Clay-Based Tailings in Seawater: A Population Balance Modelling Approach." Minerals 10, no. 9 (2020): 782. http://dx.doi.org/10.3390/min10090782.

Full text
Abstract:
A population balance model described the flocculation of clay-based mining tailings in treated seawater with reduced magnesium content. For the treatment, 0.06 M of lime was added to the liquor, generating solid magnesium complexes that were subsequently removed by vacuum filtration. Magnesium content varied between 10–1440 ppm when mixing raw seawater with treated seawater. The aggregate size was analysed by the Focused Beam Reflectance Measurement (FBRM) technology. The model follows the dynamics of the aggregation-rupture and it provides a good approximation to the temporal evolution. A dec
APA, Harvard, Vancouver, ISO, and other styles
36

Álvarez Lugo, Allex E., and Silvia Caro Spinel. "Determining surface free energy for Colombian asphalts." Ingeniería e Investigación 29, no. 2 (2009): 20–24. http://dx.doi.org/10.15446/ing.investig.v29n2.15156.

Full text
Abstract:
The surface free energy (SFE) of a material is defined as being the energy required in vacuum to create a new surface unit. This property is directly related to a material’s fracture resistance and healing properties and to its capacity for creating strong bonds with other materials. The quality of the adhesion between asphalt binders and aggregates can also be assessed by computing these materials’ work of adhesion. This value can be used as an additional parameter for selecting and appropriately combining materials for hot mix asphalt as well as a component of micromechanical models for frac
APA, Harvard, Vancouver, ISO, and other styles
37

Nagai, Yasuyuki, Yasuyuki Tsuboi, Hiroshi Miyasaka, and Akira Itaya. "Effect of applied voltage on aggregate structure of microcrystals in vacuum-deposited films of mesogens." Journal of Crystal Growth 193, no. 4 (1998): 732–37. http://dx.doi.org/10.1016/s0022-0248(98)00555-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Hall, Kevin D., Stacy G. Williams, and Frances T. Griffith. "Examination of Gamma-Ray Method for Measuring Bulk Specific Gravity of Hot-Mix Asphalt Concrete." Transportation Research Record: Journal of the Transportation Research Board 1832, no. 1 (2003): 148–54. http://dx.doi.org/10.3141/1832-18.

Full text
Abstract:
Much attention has been given to the determination of bulk specific gravity (Gmb) of compacted hot-mix asphalt (HMA) specimens. For relatively open-graded HMA mixtures, such as those produced by Superpave® and stone matrix asphalt design methods, perceived potential shortcomings in traditional test methods may be pronounced. Recently, a new device was introduced for measuring Gmb that features the use of gamma-ray technology. To evaluate the efficacy of the device, 221 compacted HMA specimens were tested with three test methods: saturated surface dry (SSD) (AASHTO T-166), vacuum-sealing (Corel
APA, Harvard, Vancouver, ISO, and other styles
39

Han, Dengfeng, Chuanyao Sun, Tichang Sun, Jingpeng Zhao, and Shuaixing Shi. "Hydrodynamic Characterization of Particle–Bubble Aggregate Transport: Bubble Load Dynamics During Vertical Ascent." Processes 13, no. 4 (2025): 1218. https://doi.org/10.3390/pr13041218.

Full text
Abstract:
Precise evaluation of flotation performance facilitates process optimization and separation efficiency enhancement, while bubble load quantification emerges as a critical diagnostic tool increasingly recognized within mineral processing research. This study introduces an enhanced bubble load measurement system that integrates equilibrium principles with vacuum suction technology. The system ensures stable and continuous sampling, significantly improving the precision and efficiency of bubble load measurements in flotation processes. Through synchronized testing in roughing and scavenging opera
APA, Harvard, Vancouver, ISO, and other styles
40

Cecchi-Pestellini, Cesare, Flavio Scappini, Rosalba Saija, et al. "On the formation and survival of complex prebiotic molecules in interstellar grain aggregates." International Journal of Astrobiology 3, no. 4 (2004): 287–93. http://dx.doi.org/10.1017/s1473550404001971.

Full text
Abstract:
The aggregation of interstellar grains as a result of ballistic collisions produces loosely packed structures with much of their internal volume composed by vacuum (cavities). The molecular material present on the surfaces of the cavities gives rise to a series of reactions induced by cosmic rays, UV radiation, thermal shocks, etc., in high reducing conditions. Thus, a terrestrial type chemistry is given the possibility to evolve inside these cavities. The resulting products are different and of a wider range than those from gas-phase or surface chemistry in molecular clouds. Under conditions
APA, Harvard, Vancouver, ISO, and other styles
41

Islam, Er Tajamul. "Brick and Glass Concrete." International Journal for Research in Applied Science and Engineering Technology 9, no. 9 (2021): 1562–70. http://dx.doi.org/10.22214/ijraset.2021.38219.

Full text
Abstract:
Abstract: Glass is widely used in our lives through manufactured products such as sheet glass, bottles, glassware, and vacuum tubing. Glass is an ideal material for recycling. The use of recycled glass helps in energy saving. The recycled glass has significant contributions to the construction field for concrete production. The application of glass in architectural concrete still needs improvement. Many experiments were conducted to explore the use of waste glass as coarse and fine aggregates for both ASR (Alkali-Silica-Reaction) in concrete. The accumulation and management of construction and
APA, Harvard, Vancouver, ISO, and other styles
42

Wang, Yejia, Chengjin Wang, Aibo Luo, et al. "Experimental Investigation on a Novel Temperature-Controlled Phase Change Aggregate Concrete: Thermo-Mechanical Properties and Hydration Heat Control." Materials 16, no. 15 (2023): 5269. http://dx.doi.org/10.3390/ma16155269.

Full text
Abstract:
To reduce the structural deterioration of mass concrete structures from temperature cracks, and lower energy consumption caused by the traditional mass concrete hydration heat cooling process, this paper reports the preparation of concrete temperature-controlled phase change aggregate (PCA) by a vacuum compaction method using light and high-strength black ceramite and No. 58 fully refined paraffin wax as phase change material (PCM), and the encapsulation technology of the aggregate by using superfine cement and epoxy resin. Further, through laboratory tests, the cylinder compressive strength,
APA, Harvard, Vancouver, ISO, and other styles
43

Hayashida, Shigeru, and Nobuyuki Hayashi. "Effect of Axial Substituents on the Aggregate of Silicon Naphthalocyanine in the Vacuum Deposited Thin Films." Chemistry Letters 19, no. 11 (1990): 2137–40. http://dx.doi.org/10.1246/cl.1990.2137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Liu, Wen Bai, Chao Shen, Xia Li, and Hong Ming Jiang. "The Study of Field Effect through Uniaxial Compression Experiment on Marine Recycled Concrete Specimen Based on DPDM Technique." Advanced Materials Research 446-449 (January 2012): 1735–42. http://dx.doi.org/10.4028/www.scientific.net/amr.446-449.1735.

Full text
Abstract:
Recycled concrete is a kind of composite heterogeneous material. Through the uniaxial compression experiment on recycled concrete specimen, the corresponding stress-strain curve is depicted with the major variables of replacement rate of recycled aggregate and time of corrosion by seawater, and the analysis of compression resistance capacity of recycled concrete sample is carried out by comparing common samples with those after the process of vacuum pumping. According to the results of comparison, the process of vacuum pumping can raise the strength of concrete by 9% to 22% and the lowering sp
APA, Harvard, Vancouver, ISO, and other styles
45

Ommat Mohammadi, Elham, Samira Yeganehzad, Mohammad Ali Hesarinejad, et al. "Adsorption Layer Properties and Foam Behavior of Aqueous Solutions of Whey Protein Isolate (WPI) Modified by Vacuum Cold Plasma (VCP)." Colloids and Interfaces 8, no. 2 (2024): 25. http://dx.doi.org/10.3390/colloids8020025.

Full text
Abstract:
For years, cold plasma processing has been used as a non-thermal technology in industries such as food. As interfacial properties of protein play a remarkable role in many processes, this study investigates the effect of cold plasma on the foaming and interfacial behavior of WPI. The objective of this study is to evaluate the effect of different gases (air, 1:1 argon–air mixture, and sulfur hexafluoride (SF6)) used in low-pressure cold plasma (VCP) treatments of whey protein isolate (WPI) on the surface and foaming behavior of aqueous WPI solutions. Dynamic surface dilational elasticity, surfa
APA, Harvard, Vancouver, ISO, and other styles
46

Zhang, Xue Feng, Yong Sheng Du, Li Ying Qi, and Guan Yuan Liu. "Electromagnetic Stirring Processing and its Influence on Mechanical Properties of ZL102(or Al-Si) Alloy." Materials Science Forum 561-565 (October 2007): 337–40. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.337.

Full text
Abstract:
Al-Si alloy was melted by using vacuum induction melting furnace heated with medium-frequency induction and stirred simultaneously under Lorentz force. The experimental results were discussed with respect to the theoretical analysis of the Lorentz force on the molten alloy. It was found that Si phase tends to homogenize and aggregate along the direction of axis in the alloy under the effect of Lorentz force. With increasing stirring duration, Rod-shaped Si phase has a tendency to break and passivate on the edge. Vickers hardness measurement indicated that the microhardness of Al-Si alloy was i
APA, Harvard, Vancouver, ISO, and other styles
47

Shipper, G., E. S. Grossman, A. J. Botha, and P. E. Cleaton-Jones. "Marginal adaptation of mineral trioxide aggregate (MTA) compared with amalgam as a root-end filling material: a low-vacuum (LV) versus high-vacuum (HV) SEM study." International Endodontic Journal 37, no. 5 (2004): 325–36. http://dx.doi.org/10.1111/j.0143-2885.2004.00806.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Shrotriya, A. K. "Resistor Model for Heat Storage Coefficient." Defect and Diffusion Forum 336 (March 2013): 65–72. http://dx.doi.org/10.4028/www.scientific.net/ddf.336.65.

Full text
Abstract:
In thermodynamics, the heat storage coefficient (HSC) β of a material is defined as the square root of the product of the material's thermal conductivity and its volumetric heat capacity. A material's HSC is a measure of its ability to exchange thermal energy with its surroundings. A resistor model has been proposed by us in the following manner. In the case of soil materials, the solid particles are surrounded by fluid, or in the case of vacuum, by empty space. The HSC of such an unconsolidated system will depend on the conditions of porous media: porosity, temperature, HSC of different phase
APA, Harvard, Vancouver, ISO, and other styles
49

Szovák, Benedek, Alexandra Kemény, and Imre Norbert Orbulov. "Unidirectional steel wire reinforced metal matrix syntactic foams." IOP Conference Series: Materials Science and Engineering 1319, no. 1 (2024): 012007. http://dx.doi.org/10.1088/1757-899x/1319/1/012007.

Full text
Abstract:
Abstract A double composite structure has been successfully produced using vacuum infiltration. In this structure, the matrix was unalloyed aluminium filled with Lightweight Expanded Clay Aggregate Particles to create metal matrix syntactic foam, and stainless steel wires were placed inside this matrix as unidirectional reinforcement. The wires created a shape-locking bond with the matrix owing to their wave-like form, which helped to prevent reinforcement pullout. Based on the acquired tensile data, the tensile strength of the specimens calculated with the theoretical maximum area of reinforc
APA, Harvard, Vancouver, ISO, and other styles
50

Shabatina, Tatyana I., Eugenia V. Vovk, Nadezhda V. Kovalevskaya, and Gleb B. Sergeev. "THE ELECTRONIC ABSORPTION SPECTRA AND MOLECULAR AGGREGATE FORMATION IN VACUUM DEPOSITED FILMS OF MESOGENIC CYANOBIPHENYLS AND THEIR SOLUTIONS." Molecular Crystals and Liquid Crystals Science and Technology. Section A. Molecular Crystals and Liquid Crystals 366, no. 1 (2001): 255–62. http://dx.doi.org/10.1080/10587250108023968.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!