Academic literature on the topic 'Vacuum-arc deposition'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Vacuum-arc deposition.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Vacuum-arc deposition"

1

Boxman, R. L., and V. N. Zhitomirsky. "Vacuum arc deposition devices." Review of Scientific Instruments 77, no. 2 (2006): 021101. http://dx.doi.org/10.1063/1.2169539.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fu, Zhi Qiang, Cheng Biao Wang, Wen Yue, Zhi Jian Peng, Song Sheng Lin, and Ming Jiang Dai. "Influence of Vacuum Cathodic Arc Etching on Structure and Properties of W-Doped DLC Films." Advanced Materials Research 787 (September 2013): 296–300. http://dx.doi.org/10.4028/www.scientific.net/amr.787.296.

Full text
Abstract:
In order to further improve the deposition process of the W-doped DLC films synthesized by a hybrid deposition method of vacuum cathodic arc, ion beam deposition, and magnetron sputtering, the paper studied the effect of vacuum cathodic arc etching prior to the deposition on the surface morphology, chemical bond status, hardness, elastic modulus, adhesion, friction, and wear of the films. It was found that the surface defects in the W-doped DLC films, which increase the average value and fluctuation of the friction coefficient of the W-doped DLC films, are mainly produced by vacuum cathodic ar
APA, Harvard, Vancouver, ISO, and other styles
3

Maksimov, Y. V., A. S. Vereschaka, A. A. Vereschaka, et al. "Development and research of multilayer composite coatings with nano-dispersed structure which are deposited on cutting tools using assistance cathode-vacuum-arc processes." Izvestiya MGTU MAMI 7, no. 1-2 (2013): 73–82. http://dx.doi.org/10.17816/2074-0530-68031.

Full text
Abstract:
The authors considered the problem of synthesis of multilayer coatings with nano-dispersed structure using the process of assistance filtered cathode-vacuum-arc deposition. The effect of high-energy assisting ions, generated by a special device (implanter), which the ВИТ-3 vacuum-arc setting was equipped with, is analyzed in the paper. The mechanisms of modifying the properties of the deposited coatings and cutting properties of carbide inserts with coatings obtained in assisting cathode-vacuum-arc deposition with filtration of ion-vapor flow are analyzed as well.
APA, Harvard, Vancouver, ISO, and other styles
4

Shinno, Hitoshi, and Masao Fukutomi. "Coating technologies using vacuum-arc deposition." Journal of the Japan Welding Society 54, no. 6 (1985): 352–57. http://dx.doi.org/10.2207/qjjws1943.54.352.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Boxman, R. L. "Early history of vacuum arc deposition." IEEE Transactions on Plasma Science 29, no. 5 (2001): 759–61. http://dx.doi.org/10.1109/27.964470.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Boxman, R. L. "Recent developments in vacuum arc deposition." IEEE Transactions on Plasma Science 29, no. 5 (2001): 762–67. http://dx.doi.org/10.1109/27.964471.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vershinin, Nikolay, Boris Straumal, and Wolfgang Gust. "Vacuum arc deposition of Mo films." Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 14, no. 6 (1996): 3252–55. http://dx.doi.org/10.1116/1.580221.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Straumal, B., W. Gust, N. Vershinin, R. Dimitriou, and E. Rabkin. "Vacuum arc deposition of Ti coatings." Surface and Coatings Technology 125, no. 1-3 (2000): 157–60. http://dx.doi.org/10.1016/s0257-8972(99)00597-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Siemroth, P., B. Schultrich, and T. Schülke. "Fundamental processes in vacuum arc deposition." Surface and Coatings Technology 74-75 (September 1995): 92–96. http://dx.doi.org/10.1016/0257-8972(95)08346-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Budilov, Vladimir Vasilyevich, Viktor Sergeevich Mukhin, Ilgiz Irekovich Yagafarov, and Kamil Nurullaevich Ramazanov. "Surface Roughness and Part Dimensional Accuracy after Deposition of Coating by Vacuum Arc Plasma." Applied Mechanics and Materials 799-800 (October 2015): 423–27. http://dx.doi.org/10.4028/www.scientific.net/amm.799-800.423.

Full text
Abstract:
Nitride coatings were deposited by vacuum arc plasma, in an atmosphere of argon and nitrogen using different deposition conditions of part location and configuration, angle between plasma flow and processing surface. The coating thickness, part dimensions and surface roughness were measured before and after coating deposition. The type of part poor shape precision after coating deposition by vacuum arc plasma was defined. An impact of coating deposition by vacuum arc discharge on the part dimensional and form accuracy was revealed. The effect of parts location on dimensional and radial surface
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Vacuum-arc deposition"

1

Beresnev, V. M., O. V. Sobol’, Олександр Дмитрович Погребняк, et al. "About Peculiarities of the Influence of the Negative Bias Potential Applied to the Substrate During the Deposition Process on the Structural State and Properties of the Multilayer system MoN-CrN." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42799.

Full text
Abstract:
Applying transition metal nitrides of Mo and Cr, which are characterized by a relatively low heat of formation, as the components of the multilayer coating, the possibilities of elemental and structural engineering of vacuum-arc coatings under the influence of the bias potential Us and the reaction gas pressure PN are revealed. It was found that at a relatively small thickness of the layers of nanometer range, which provides superhard state of the coatings, the supply of Us with the value of above the critical leads to a drop in hardness, which can be explained by mixing of layers at the inter
APA, Harvard, Vancouver, ISO, and other styles
2

Veerasamy, Vijayen S. "Tetrahedral amorphous carbon : deposition, characterisation and electronic properties." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.337824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kandah, Munther. "Droplets generation mechanisms by graphite cathodes in the vacuum arc deposition technique." Thesis, McGill University, 1993. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=69702.

Full text
Abstract:
The most severe problem for the vacuum arc deposition (VAD) technique is the formation of micron-size particles on the films. These particles degrade the films' properties. The present work studied the generation mechanisms and characteristics of the droplets that are produced in the carbon films deposited by vacuum arc technique. To achieve a better control of the generation mechanism of these droplets, the effect of the arc current, arc duration time, cathode spot temperature and distance between cathode and substrate on the size and population of the micro-droplets are studied.<br>The micro
APA, Harvard, Vancouver, ISO, and other styles
4

Minault, Christophe S. "Filtered vacuum arc deposition of diamond like carbon films on sharp edged samples." Thesis, University of Reading, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.298488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Baranov, O. O. "Influence of Ion Current Density on the Properties of Vacuum Arc-deposited TiN Coating." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35250.

Full text
Abstract:
Influence of ion current density on the thickness of coating deposited in the vacuum arc setup has been investigated. A planar probe was used to measure the ion current density distribution across plasma flux at a distance of 250 mm from the plasma duct exit. The current density from 20 to 50 A/m2 was obtained, depending on the probe position relative to the substrate center. TiN coatings were deposited onto cutting inserts placed at different locations on the substrate, and SEM technique was used to characterize surfaces of the coatings. It was found that low-dense coatings were formed at the
APA, Harvard, Vancouver, ISO, and other styles
6

Oates, T. W. H. "Metal plasma immersion ion implantation and deposition using polymer substrates." Thesis, The University of Sydney, 2003. http://hdl.handle.net/2123/571.

Full text
Abstract:
This thesis investigates the application of plasma immersion ion implantation (PIII) to polymers. PIII requires that a high negative potential be applied to the surface of the material while it is immersed in a plasma. This presents a problem for insulating materials such as polymers, since the implanting ions carry charge to the surface, resulting in a charge accumulation that effectively neutralises the applied potential. This causes the plasma sheath at the surface to collapse a short time after the potential is applied. Measurements of the sheath dynamics, including the collapsing shea
APA, Harvard, Vancouver, ISO, and other styles
7

Oates, T. W. H. "Metal plasma immersion ion implantation and deposition using polymer substrates." University of Sydney. Physics, 2003. http://hdl.handle.net/2123/571.

Full text
Abstract:
This thesis investigates the application of plasma immersion ion implantation (PIII) to polymers. PIII requires that a high negative potential be applied to the surface of the material while it is immersed in a plasma. This presents a problem for insulating materials such as polymers, since the implanting ions carry charge to the surface, resulting in a charge accumulation that effectively neutralises the applied potential. This causes the plasma sheath at the surface to collapse a short time after the potential is applied. Measurements of the sheath dynamics, including the collapsing shea
APA, Harvard, Vancouver, ISO, and other styles
8

Бондар, Олександр В`ячеславович, Александр Вячеславович Бондарь, Oleksandr Viacheslavovych Bondar, et al. "Physical and Mechanical Properties of (Ti-Zr-Nb)N Coatings, Fabricated by Vacuum-Arc Deposition." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42580.

Full text
Abstract:
The coatings based on (Ti-Zr-Nb)N were fabricated by vacuum-arc deposition of the Ti+Zr+Nb cathodes in the nitrogen atmosphere. Their physical and mechanical properties as well as tribological characteristics have been studied. The coatings are characterized by a columnar structure, their hardness reaches 44.57 GPa. The adhesion strength of coatings reaches 66.77 GPa, the friction coefficient of the «cover – Al2O3» is 1.1. It has been determined, that the hardness of the investigated coatings significantly depends on the pressure of the reaction gas. The coatings are promising as protecti
APA, Harvard, Vancouver, ISO, and other styles
9

Погребняк, Олександр Дмитрович, Александр Дмитриевич Погребняк, Oleksandr Dmytrovych Pohrebniak, et al. "Formation of Superhard Nanostructured Ti–Hf–N(Fe) Coatings Obtained by Vacuum Arc Deposition in HF discharge." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34929.

Full text
Abstract:
Superhard nanostructured Ti–Hf–N(Fe) coatings are prepared. The formation of local regions of (Ti, Hf)N, FeN, and Hf is detected using μ-PIXE (ion microbeam). It is revealed that the synthesized coatings have a nanohardness of 48 ± 1 GPa and are composed of nanograins with a size of 4.8–10.6 nm, which are enveloped by finer entities of other phases (Ti, Fe)N and FeN. There is a good correlation between the results derived by XRD, TEM, AFM, and SEM and microanalysis, which in turn are complemented by the analysis results obtained using an ion microbeam and PIXE. When you are citing the doc
APA, Harvard, Vancouver, ISO, and other styles
10

Vasyliev, V. V., A. A. Luchaninov, E. N. Reshetnyak, and V. E. Strelnitskij. "Comparative Characteristics of Stress and Structure of TiN and Ti0.5-xAl0.5YxN Coatings Prepared by Filtered Vacuum-Arc PIIID Method." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34913.

Full text
Abstract:
A comparative study of the structure and stress state of Ti0.5-xAl0.5YxN and TiN coatings deposited under identical conditions from the filtered vacuum-arc plasma under high voltage pulsed bias potential on the substrate was carried out. It was found that for Ti0.5Al0.5N coatings the dependence of the residual stress on the amplitude of the pulsed voltage potential is non-monotonic with a minimum when the amplitude is of 1 kV. As for TiN films, a monotonic decrease in the level of residual stresses takes place when the amplitude of the potential is increased in the range 0-2.5 kV. Non-mon
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Vacuum-arc deposition"

1

Beilis, Isak. "Vacuum Arc Plasma Sources. Thin Film Deposition." In Plasma and Spot Phenomena in Electrical Arcs. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44747-2_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schultrich, Bernd. "Methods of Vacuum Arc Deposition of ta-C Films." In Tetrahedrally Bonded Amorphous Carbon Films I. Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-55927-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhitomirsky, V. N., I. Grimberg, M. C. Joseph, et al. "Vacuum arc plasma deposition of wear resistant coatings on polymer substrates." In Polymer Surface Modification: Relevance to Adhesion, Volume 2. CRC Press, 2023. http://dx.doi.org/10.1201/9780429070419-33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Demchyshyn, A. V., Yu A. Kurapov, V. A. Michenko, Ye G. Kostin, A. A. Goncharov, and Ye G. Ternovoi. "Linear Vacuum ARC Evaporators for Deposition of Functional Multi-Purpose Coatings." In Emerging Applications of Vacuum-Arc-Produced Plasma, Ion and Electron Beams. Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0277-6_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mladenov, G., K. Vutova, G. Djanovski, E. Koleva, V. Vassileva, and D. Mollov. "Electron Beam Deposition of High Temperature Superconducting Thin Films." In Emerging Applications of Vacuum-Arc-Produced Plasma, Ion and Electron Beams. Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0277-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bilek, M. M. M., D. R. McKenzie, T. W. H. Oates, J. Pigott, P. Denniss, and J. Vlcek. "Deposition of Nanoscale Multilayered Structures Using Filtered Cathodic Vacuum Arc Plasma Beams." In Emerging Applications of Vacuum-Arc-Produced Plasma, Ion and Electron Beams. Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0277-6_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Xu, Hui Xing Zhang, Xiang Ying Wu, and Tong He Zhang. "Low Stress Tetrahedral Amorphous Carbon Films Prepared by Filtered Vacuum Arc Deposition." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.3623.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Beilis, I. I., and R. L. Boxman. "Thin Film Deposition by Plasma Beam of a Vacuum Arc with Refractory Anodes." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6133-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pinchuk, Nataliia, Mykola Tkachuk, Valentyn Riaboshtan, and Valentyna Voloshchuk. "Features of the Formation and Characterization of ZrN Coatings Using Vacuum-Arc Deposition." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-63720-9_37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shekhtman, S. R., and N. A. Sukhova. "Study of the Influence of Ion Bombardment on the Quality of Coatings Obtained by the Vacuum Arc Deposition." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-85230-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Vacuum-arc deposition"

1

Beilis, I. I., Y. Koulik, E. Yankelevich, D. Arbilly, and R. L. Boxman. "Vacuum arc deposition using refractory electrodes." In 2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV). IEEE, 2014. http://dx.doi.org/10.1109/deiv.2014.6961732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Boxman, Raymond, Samuel Goldsmith, Amir Ben-Shalom, et al. "Filtered vacuum arc deposition of semiconductor thin films." In XVI International Symposium on Discharges and Electrical Insulation in Vacuum, edited by Gennady A. Mesyats. SPIE, 1994. http://dx.doi.org/10.1117/12.174615.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Hao, Jiyan Zou, Mao-lin Li, Li-chun Cheng, and Hong Lin Yang. "Characterization of the cathode spot in vacuum-arc deposition." In XVI International Symposium on Discharges and Electrical Insulation in Vacuum, edited by Gennady A. Mesyats. SPIE, 1994. http://dx.doi.org/10.1117/12.174645.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Aksenov, I. I., D. S. Aksyonov, V. V. Vasilyev, A. A. Luchaninov, E. N. Reshetnyak, and V. E. Strel'nitskij. "Filtered vacuum-arc plasma source for composite coatings deposition." In 2008 XXIII International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV 2008). IEEE, 2008. http://dx.doi.org/10.1109/deiv.2008.4676857.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Beilis, I. I., Y. Koulik, and R. L. Boxman. "Sn Thin Film Deposition using a Hot Refractory Anode Vacuum Arc." In 13th International Conference on Plasma Surface Engineering September 10 - 14, 2012, in Garmisch-Partenkirchen, Germany. Linköping University Electronic Press, 2013. http://dx.doi.org/10.3384/wcc2.231-234.

Full text
Abstract:
A Hot Refractory Anode Vacuum Arc (HRAVA) starts as cathodic arc, heating the anode and depositing on it cathode material. When the anode is hot, all deposited cathode material is reevaporated from the anode forming cleaner radially expanding plasma. It was shown that the rate of deposition reached 2-3 µm/min with significantly reduced macroparticle contamination in Sn films produced by HRAVA with current I=60–175 A and duration up to 180 s.
APA, Harvard, Vancouver, ISO, and other styles
6

Anders, Andre, Simone Anders, Ian G. Brown, Robert A. MacGill, and Michael R. Dickinson. "Vacuum-arc plasma deposition: macroparticle filtering, scaling, and other problems." In XVI International Symposium on Discharges and Electrical Insulation in Vacuum, edited by Gennady A. Mesyats. SPIE, 1994. http://dx.doi.org/10.1117/12.174640.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Hao, Jiyan Zou, Lei Yang, Li-chun Cheng, and Hong Lin Yang. "Calculation of film-thickness distribution provided by vacuum-arc deposition." In XVI International Symposium on Discharges and Electrical Insulation in Vacuum, edited by Gennady A. Mesyats. SPIE, 1994. http://dx.doi.org/10.1117/12.174644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vardanyan, Eduard, Almaz Nazarov, Rustem Nagimov, Kamil Ramazanov, and Alexey Maslov. "Deposition of Aluminum Oxides From a Vacuum-Arc Discharge Plasma." In 2020 7th International Congress on Energy Fluxes and Radiation Effects (EFRE). IEEE, 2020. http://dx.doi.org/10.1109/efre47760.2020.9242024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Yanzhe, Duowang Fan, Chaohui Yang, Linggang Kong, and Weizhong Zhang. "Controller of Target Power Supply in Multi-Arc Ion Vacuum Deposition." In 2007 International Nano-Optoelectronics Workshop. IEEE, 2007. http://dx.doi.org/10.1109/inow.2007.4302986.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bagdasaryan, A. A., P. Wegierek, and I. Shakhova. "Microstructural evolution of (ZrTiNbCr)N multicomponent coatings obtained by vacuum arc deposition." In 2016 International Conference on Nanomaterials: Application & Properties (NAP). IEEE, 2016. http://dx.doi.org/10.1109/nap.2016.7757224.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!