Relevant bibliographies by topics / VARIABLE-SPEED MOTOR

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'VARIABLE-SPEED MOTOR'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'VARIABLE-SPEED MOTOR.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "VARIABLE-SPEED MOTOR"

1

Henze, Michael. "The Integral Motor — A new variable-speed motor drive." World Pumps 1996, no. 358 (July 1996): 54–57. http://dx.doi.org/10.1016/s0262-1762(99)80683-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Peng, Tian Hao, and Teng Ma. "Speed Loss Compensation Simulation Analysis on Variable-Speed Pump-Control-Motor System." Applied Mechanics and Materials 385-386 (August 2013): 896–900. http://dx.doi.org/10.4028/www.scientific.net/amm.385-386.896.

Full text
Abstract:
This paper analyses the reasons of motor speed loss on variable-speed pump-control-motor governing system, and points out that the reasons are system leakage, electromotor characteristics and oil compressibility caused by system pressure change. Speed loss compensation method of variable-speed pump-control-motor governing system is put forward. Simulation analysis is carried out under constant load, variable load and variable-speed, and simulation results show that the compensation method can well compensate motor speed loss.
APA, Harvard, Vancouver, ISO, and other styles
3

Strelkov, V. F., M. V. Andryushin, and V. V. Vanyev. "Power antenna radar with variable speed." Journal of «Almaz – Antey» Air and Space Defence Corporation, no. 3 (September 30, 2015): 81–87. http://dx.doi.org/10.38013/2542-0542-2015-3-81-87.

Full text
Abstract:
A mathematical model of the "mains - regulated electric drive" radar antenna us with a synchronous motor with permanent magnets. Peculiarities of work at a controlled electric variable speed electric motor shaft. A method and control system with motorized adjustable mechanical and electronic scanning of the antenna, improving performance characteristics of radar stations.
APA, Harvard, Vancouver, ISO, and other styles
4

Karady, G. G., S. H. Berisha, M. Muralidhar, J. A. Demcko, and M. Samotyj. "Variable speed motor drive generated magnetic fields." IEEE Transactions on Power Delivery 9, no. 3 (July 1994): 1639–46. http://dx.doi.org/10.1109/61.311199.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nakamae, E., H. Yamashita, K. Kaneda, Y. Ohnogi, and K. Kagawa. "Noiseless variable-speed squirrel-cage induction motor." IEEE Transactions on Energy Conversion 5, no. 2 (June 1990): 380–85. http://dx.doi.org/10.1109/60.107236.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dursun, Emre Hasan, and Akif Durdu. "Speed Control of a DC Motor with Variable Load Using Sliding Mode Control." International Journal of Computer and Electrical Engineering 8, no. 3 (2016): 219–26. http://dx.doi.org/10.17706/ijcee.2016.8.3.219-226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mardiyanto, Ignatius Riyadi. "The Harmonics Effect of Variable Speed Drives on Generator Performance." Current Journal: International Journal Applied Technology Research 1, no. 2 (October 1, 2020): 112–19. http://dx.doi.org/10.35313/ijatr.v1i2.34.

Full text
Abstract:
Large motors often burden synchronous generators as power plants in factories. This motor is commonly using to regulate rotation using Variable Speed Drive (VSD). From the load side, VSD, as a regulator of motor rotation, can reduce power loss. On the generator side as a power plant, this load with VSD affects the waveform of the generator. The experiments on a small capacity generator (6 kVA) with a VSD as regulating the motor rotation with a load of about 1.1 kW shows effectiveness power transfer is about 40.7% with VSD, and without VSD, efficiency is approximately 39.6%. The motor losses by installing VSD interpreted as transferring losses to the generator with savings is about 1 %. The experiments also showed that generator performance decreases when loaded with VSD at around 6%, and a generator temperature increases at 20 0C higher than without VSD.
APA, Harvard, Vancouver, ISO, and other styles
8

Marchi, A., A. R. Simpson, and N. Ertugrul. "Assessing variable speed pump efficiency in water distribution systems." Drinking Water Engineering and Science 5, no. 1 (July 4, 2012): 15–21. http://dx.doi.org/10.5194/dwes-5-15-2012.

Full text
Abstract:
Abstract. Energy savings and greenhouse gas emission reductions are increasingly becoming important design targets in many industrial systems where fossil fuel based electrical energy is heavily utilised. In water distribution systems (WDSs) a significant portion of operational cost is related to pumping. Recent studies have considered variable speed pumps (VSPs) which aim to vary the operating point of the pump to match demand to pumping rate. Depending on the system characteristics, this approach can lead to considerable savings in operational costs. In particular, cost reductions can take advantage of the demand variability and can decrease energy consumption significantly. One of the issues in using variable speed pumping systems, however, is the total efficiency of the electric motor/pump arrangement under a given operating condition. This paper aims to provide a comprehensive discussion about the components of WDS that incorporate variable speed pumps (including electric motors, variable frequency drives and the pumps themselves) to provide an insight of ways of increasing the system efficiency and hence to reduce energy consumption. In addition, specific attention is given to selection of motor types, sizing, duty cycle of pump (ratio of on-time and time period), losses due to installation and motor faults. All these factors affect the efficiency of motor drive/pump system.
APA, Harvard, Vancouver, ISO, and other styles
9

Marchi, A., A. R. Simpson, and N. Ertugrul. "Assessing variable speed pump efficiency in water distribution systems." Drinking Water Engineering and Science Discussions 5, no. 1 (March 15, 2012): 47–65. http://dx.doi.org/10.5194/dwesd-5-47-2012.

Full text
Abstract:
Abstract. Energy savings and greenhouse gas emission reductions are increasingly becoming important design targets in many industrial systems where fossil fuel based electrical energy is heavily utilised. In water distribution systems (WDSs) a significant portion of operational cost is related to pumping. Recent studies have considered variable speed pumps (VSPs) which aim to vary the operating point of the pump to match demand to pumping rate. Depending on the system characteristics, this approach can lead to considerable savings in operational costs. In particular, cost reductions can take advantage of the demand variability and can decrease energy consumption significantly. One of the issues in using variable speed pumping systems, however, is the total efficiency of the electric motor/pump arrangement under a given operating condition. This paper aims to provide a comprehensive discussion about the components of WDS that incorporate variable speed pumps (including electric motors, inverters and the pumps themselves) to provide an insight of ways of increasing the system efficiency and hence to reduce energy consumption. In addition, specific attention is given to selection of motor types, sizing, duty cycle of pump (ratio of on-time and time period), losses due to installation and motor faults. All these factors affect the efficiency of motor drive/pump system.
APA, Harvard, Vancouver, ISO, and other styles
10

Anton, Anton, and Tuti Angraini. "UNJUK KERJA DAN PEMANFAATAN INVERTER SEBAGAI PENGENDALI KECEPATAN MOTOR INDUKSI 3 PHASA." Elektron : Jurnal Ilmiah 5, no. 2 (December 13, 2013): 87–92. http://dx.doi.org/10.30630/eji.5.2.59.

Full text
Abstract:
The Induction motors are found in industrial and domestic environments because of low cost of operation including, induction motors are widely used induction motor 1 phase and 3 phase. During operation of induction motors generally used at normal speed, but the specific purpose induction motors operated with variable speed. In order to obtain varying motor speed can be controlled using the inverter. The use of inverters here to give supplay voltage AC induction motor in which the magnitude of the frequency can be varied. Setting frequency of the inverter utilizing method pulse with modulation (PWM). The circuit used to build PWM, using Insulated Gate Bipolar Transistor (IGBT) technology. Values ​​obtained variable frequency ranging from 4 Hz to 50 Hz, and acquired motor speed ranging from 12 rpm up to 1390 rpm.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "VARIABLE-SPEED MOTOR"

1

Stefani, Andrea <1976&gt. "Induction Motor Diagnosis in Variable Speed Drives." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2010. http://amsdottorato.unibo.it/2311/.

Full text
Abstract:
Several diagnostic techniques are presented for the detection of electrical fault in induction motor variable speed drives. These techinques are developed taking into account the impact of the control system on machine variables and non stationary operating conditions.
APA, Harvard, Vancouver, ISO, and other styles
2

Maggs, John David. "Electromagnetic interference from variable speed motor drives." Thesis, Aston University, 1996. http://publications.aston.ac.uk/15347/.

Full text
Abstract:
A methodology is presented which can be used to produce the level of electromagnetic interference, in the form of conducted and radiated emissions, from variable speed drives, the drive that was modelled being a Eurotherm 583 drive. The conducted emissions are predicted using an accurate circuit model of the drive and its associated equipment. The circuit model was constructed from a number of different areas, these being: the power electronics of the drive, the line impedance stabilising network used during the experimental work to measure the conducted emissions, a model of an induction motor assuming near zero load, an accurate model of the shielded cable which connected the drive to the motor, and finally the parasitic capacitances that were present in the drive modelled. The conducted emissions were predicted with an error of +/-6dB over the frequency range 150kHz to 16MHz, which compares well with the limits set in the standards which specify a frequency range of 150kHz to 30MHz. The conducted emissions model was also used to predict the current and voltage sources which were used to predict the radiated emissions from the drive. Two methods for the prediction of the radiated emissions from the drive were investigated, the first being two-dimensional finite element analysis and the second three-dimensional transmission line matrix modelling. The finite element model took account of the features of the drive that were considered to produce the majority of the radiation, these features being the switching of the IGBT's in the inverter, the shielded cable which connected the drive to the motor as well as some of the cables that were present in the drive.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhu, Chaoying. "Induction motor speed sensing and control." Thesis, University of Sussex, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Salmon, John C. "A variable speed unipolar induction motor inverter drive." Thesis, Imperial College London, 1987. http://hdl.handle.net/10044/1/46449.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lewin, Paul Leonard. "Microprocessor control of a switched reluctance motor." Thesis, University of Southampton, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.262359.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Allaith, Noori A. "Intelligent power module for variable speed AC motor drives." Thesis, University of Bristol, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wheeler, Patrick W. "A matrix converter for variable speed AC motor drives." Thesis, University of Bristol, 1993. http://hdl.handle.net/1983/1eec4275-808a-4125-813b-4f6e00881f44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Saad, S. "Efficiency of mining electrical variable speed drive systems." Thesis, University of Nottingham, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.381103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wheeler, Jeremy Nicholas. "Back-to-back converters for variable speed motor drive applications." Thesis, University of Bristol, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.294550.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chikwanda, Herbert Simbarashe. "The naturally commutated, converter-fed, variable speed induction machine drive." Thesis, Imperial College London, 1990. http://hdl.handle.net/10044/1/47805.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "VARIABLE-SPEED MOTOR"

1

Finney, David. Variable frequency AC motor drive systems. London: Peregrinus, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Variable frequency AC motor drive systems. London, U.K: P. Peregrinus on behalf of the Institution of Electrical Engineers, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hansen, Irving G. Variable speed induction motor operation from a 20-kHz power bus. [Washington, DC]: National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ryan, Maura C. Adjustable speed drives: Reference guide. [Toronto, Ontario?]: Ontario Hydo, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ryan, Maura C. Adjustable speed drive reference guide. [Toronto, Canada]: Ontario Hydro, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Carrow, Robert S. Electrician's technical reference. Australia: Delmar, Thomson Learning, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Püttgen, H. B. Adjustable speed drives: Directory. 3rd ed. Palo Alto, CA: The Institute, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Haataja, Jorma. A comparative performance study of four-pole induction motors and synchronous reluctance motors in variable speed drives. Lappeenranta, Finland: Lappeenranta University of Technology, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Plc, Control Techniques Drives, and Institution of Electrical Engineers, eds. The Control Techniques drives and controls handbook. Stevenage: Institution of Electrical Engineers, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hydraulic Institute (U.S.). Drivers and Controls Committee. Variable frequency drives: Guidelines for application, installation, and troubleshooting. Parsippany, NJ: Hydraulic Institute, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "VARIABLE-SPEED MOTOR"

1

Didden, M., J. Driesen, and R. Belmans. "Possible Problems and Solutions when Introducing Variable Speed Drives." In Energy Efficiency in Motor Driven Systems, 471–77. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-55475-9_68.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Haataja, Jorma, and Juha Pyrhönen. "Permanent Magnet Assisted Synchronous Reluctance Motor: an Alternative Motor in Variable Speed Drives." In Energy Efficiency in Motor Driven Systems, 101–10. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-55475-9_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Guchhait, Pabitra Kumar, Suvadip Roy, and Abhik Banerjee. "PIC Controller Based SVPWM Technique for Induction Motor Variable Speed Drive." In Lecture Notes in Electrical Engineering, 541–53. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7031-5_52.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Siddiqui, Khadim Moin, Mohd Khursheed, Rafik Ahmad, and Fazlur Rahman. "Performance Assessment of Variable Speed Induction Motor by Advanced Modulation Techniques." In Lecture Notes in Electrical Engineering, 729–37. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4080-0_70.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cao, Shaoyong, Xinfeng Zou, and Zhi Huang. "Speed Sensorless Vector Control Based on Variable Structure of an Asynchronous Motor Using Neural Network Speed Estimation." In Proceedings of IncoME-V & CEPE Net-2020, 550–57. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75793-9_52.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mendonça, Paulo, and Duarte M. Sousa. "Scalar Variable Speed Motor Control for Traction Systems with Torque and Field Orientation Filter." In Technological Innovation for Cyber-Physical Systems, 226–34. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31165-4_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Abusaad, Samieh, Ahmed Benghozzi, Ann Smith, Fengshou Gu, and Andrew Ball. "The Detection of Shaft Misalignments Using Motor Current Signals from a Sensorless Variable Speed Drive." In Mechanisms and Machine Science, 173–82. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09918-7_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Machado, Luis, Tiago J. C. Sousa, Delfim Pedrosa, Vitor Monteiro, J. G. Pinto, and Joao L. Afonso. "A Three-Phase Bidirectional Variable Speed Drive: An Experimental Validation for a Three-Phase Induction Motor." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 47–57. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45694-8_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Suying, Wenshuai Cui, Yankai Shen, and Huixian Liu. "Direct Torque Control of Permanent Magnet Synchronous Motor at Low Speed Using a Variable PI Feedback Flux Observer." In Lecture Notes in Electrical Engineering, 927–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-48768-6_103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Boldea, Ion, and Lucian Tutelea. "Three-Phase Variable-Speed Reluctance Synchronous Motors." In Reluctance Electric Machines, 105–41. Boca Raton : Taylor & Francis, a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the academic division of T&F Informa, plc, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9780429458316-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "VARIABLE-SPEED MOTOR"

1

Cupertino, F. "Sliding mode control of an induction motor." In 8th International Conference on Power Electronics and Variable Speed Drives. IEE, 2000. http://dx.doi.org/10.1049/cp:20000246.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bonvin, F. "BLDC motor control in multiple dq axes." In 8th International Conference on Power Electronics and Variable Speed Drives. IEE, 2000. http://dx.doi.org/10.1049/cp:20000298.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Aarniovuori, L., A. Kosonen, M. Niemela, and J. Pyrhonen. "Calorimetric measurement of variable-speed induction motor." In 2012 XXth International Conference on Electrical Machines (ICEM). IEEE, 2012. http://dx.doi.org/10.1109/icelmach.2012.6349979.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wimshurst, M. J. V. "Harmonic filtering of large induction motor variable frequency drives." In 6th International Conference on Power Electronics and Variable Speed Drives. IEE, 1996. http://dx.doi.org/10.1049/cp:19960882.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dancygier, G. "Motor control law and comfort law in the Peugeot and Citroen electric vehicles driven by a DC commutator motor." In Seventh International Conference on Power Electronics and Variable Speed Drives. IEE, 1998. http://dx.doi.org/10.1049/cp:19980553.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Benkhoris, M. F. "Discrete sliding control technique of DC motor drive." In 6th International Conference on Power Electronics and Variable Speed Drives. IEE, 1996. http://dx.doi.org/10.1049/cp:19960892.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Barnes, M. "Power factor correction in switched reluctance motor drives." In Seventh International Conference on Power Electronics and Variable Speed Drives. IEE, 1998. http://dx.doi.org/10.1049/cp:19980493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cheng, K. W. E. "Stator resistance compensation method for induction motor drives." In Seventh International Conference on Power Electronics and Variable Speed Drives. IEE, 1998. http://dx.doi.org/10.1049/cp:19980512.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Madani, N. "Sliding mode control of an asynchronous motor drive." In Seventh International Conference on Power Electronics and Variable Speed Drives. IEE, 1998. http://dx.doi.org/10.1049/cp:19980548.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bodin, F. "New reference frame for brushless DC motor drive." In Seventh International Conference on Power Electronics and Variable Speed Drives. IEE, 1998. http://dx.doi.org/10.1049/cp:19980586.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "VARIABLE-SPEED MOTOR"

1

Aldrich, R., and J. Williamson. Evaluation of Retrofit Variable-Speed Furnace Fan Motors. Office of Scientific and Technical Information (OSTI), January 2014. http://dx.doi.org/10.2172/1122310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aldrich, R., and J. Williamson. Evaluation of Retrofit Variable-Speed Furnace Fan Motors. Office of Scientific and Technical Information (OSTI), January 2014. http://dx.doi.org/10.2172/1220938.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hawsey, R. A., B. B. Banerjee, and P. M. Grant. Power applications of high-temperature superconductivity: Variable speed motors, current switches, and energy storage for end use. Office of Scientific and Technical Information (OSTI), August 1996. http://dx.doi.org/10.2172/383678.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'VARIABLE-SPEED MOTOR' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography