Relevant bibliographies by topics / Various Loads

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Various Loads'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Various Loads.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Various Loads"

1

Holbein, M. A., and M. S. Redfern. "Postural Stability While Walking and Carrying Loads in Various Postures." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 38, no. 10 (1994): 564–67. http://dx.doi.org/10.1177/154193129403801005.

Full text
Abstract:
Falls, over-exertion injuries and other potential consequences of balance losses continue to be serious ergonomic concerns. Stability issues are important in the prevention of these injuries, especially when the task is complicated by handling loads. However, stability analyses are not typical components of ergonomic job analyses. This study demonstrated that stability assessments can be effective in recommending load-carrying strategies. In particular, the effects of load positioning and magnitude on stability were investigated. Unladen walking was also tested for comparison. Several stabilit
APA, Harvard, Vancouver, ISO, and other styles
2

Holbein, Mary Ann, and Mark S. Redfern. "Postural Stability While Holding Loads in Various Postures." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 37, no. 10 (1993): 697–700. http://dx.doi.org/10.1177/154193129303701011.

Full text
Abstract:
Stability while handling loads is an important issue in the prevention of injuries. This study investigated the effects of load positioning on recovery from an unexpected balance disturbance while standing upright holding loads. Fifteen subjects were tested while holding a box in one of five postures. An empty box and a 25 lb box were tested. Subjects stood on a posture platform while perturbations of the supporting surface were induced. Postural sway was recorded via center of pressure displacements calculated from three dimensional foot forces. It was found that laden standing with the heavi
APA, Harvard, Vancouver, ISO, and other styles
3

Soomro, Z., S. Khoso, T. Ali, S. A. Abbasi, A. A. Ansari, and M. T. Naqash. "Realistic Determination of Live Loads on Various Reinforced Concrete Structures." Engineering, Technology & Applied Science Research 12, no. 3 (2022): 8506–11. http://dx.doi.org/10.48084/etasr.4783.

Full text
Abstract:
This paper presents various case studies of examined and calculated live loads on reinforced concrete structures. These case studies accumulated information and data of existing structures about their design live loads and acquired detailed drawings showing the reinforcement in their floor slab sections. The actual occupancy loads that act on the floor slabs were assessed, and the ultimate loads that an individual slab section should be able to support were calculated using the methods recommended by ACI, CP-114, CP-110, and the yield line theory. A reinforced concrete slab panel was also test
APA, Harvard, Vancouver, ISO, and other styles
4

Ren, W. J., L. Wang, Q. H. Mao, S. B. Jiang, and S. Huang. "Coupling Properties of Chain Drive System under Various and Eccentric Loads." International Journal of Simulation Modelling 19, no. 4 (2020): 643–54. http://dx.doi.org/10.2507/ijsimm19-4-535.

Full text
Abstract:
The chain drive system is a core subsystem of heavy scraper conveyors. During operation, violent oscillations of fluctuating loads on the chain and uneven loads at the two chain sides are observed, thus intensifying chain wear and even causing chain breakage. The dynamic properties of a chain drive system under various load and eccentric load were discussed thoroughly by combining dynamic and discrete element coupling analyses to improve the reliability of the scraper conveyor. Based on the discrete element method and multibody dynamic theory, a coupling analysis model of a scraper conveyor wa
APA, Harvard, Vancouver, ISO, and other styles
5

Janbandhu, Akshita, Piyush Singh, K. R. Dabhekar, I. Khedikar, and Janmejay V. Shukla. "Effect of Various Concentric Bracing in Building." IOP Conference Series: Earth and Environmental Science 1193, no. 1 (2023): 012014. http://dx.doi.org/10.1088/1755-1315/1193/1/012014.

Full text
Abstract:
Abstract While constructing a building the most important factor to be considered is its strength. Strength against different types of load that will be act on the structure after absolute construction. The most important type of load to be considered while construction is lateral load, cause not every structure can sustain lateral loads, especially high-rise structures build on earthquake prone areas. In order to resist lateral loads on such areas either the structure should have columns of higher section or we need to add shear wall or bracing to the structure. Bracing and shear wall provide
APA, Harvard, Vancouver, ISO, and other styles
6

Suchomel, Timothy J., Christopher B. Taber, and Glenn A. Wright. "Jump Shrug Height and Landing Forces Across Various Loads." International Journal of Sports Physiology and Performance 11, no. 1 (2016): 61–65. http://dx.doi.org/10.1123/ijspp.2015-0028.

Full text
Abstract:
The purpose of this study was to examine the effect that load has on the mechanics of the jump shrug. Fifteen track and field and club/intramural athletes (age 21.7 ± 1.3 y, height 180.9 ± 6.6 cm, body mass 84.7 ± 13.2 kg, 1-repetition-maximum (1RM) hang power clean 109.1 ± 17.2 kg) performed repetitions of the jump shrug at 30%, 45%, 65%, and 80% of their 1RM hang power clean. Jump height, peak landing force, and potential energy of the system at jump-shrug apex were compared between loads using a series of 1-way repeated-measures ANOVAs. Statistical differences in jump height (P < .001),
APA, Harvard, Vancouver, ISO, and other styles
7

Lee, Sang Min, Young Hwan Choi, Hae Dong Chung, Yoon Suk Chang, and Young Jin Kim. "Plastic Limit Analysis of an Elbow with Various Wall-Thinning Geometries." Key Engineering Materials 385-387 (July 2008): 833–36. http://dx.doi.org/10.4028/www.scientific.net/kem.385-387.833.

Full text
Abstract:
A piping system including straight pipes, elbows and tee branches in a nuclear power plant is mostly subjected to severe loading conditions with high temperature and pressure. In particular, the wall-thinning of an elbow due to flow accelerated corrosion is one of safety issues in the nuclear industry. In this respect, it is necessary to investigate the limit loads of an elbow with a wall-thinned part for evaluating integrity. In this paper, three dimensional plastic limit analyses are performed to obtain limit loads of an elbow with different bend angles as well as defect geometries under int
APA, Harvard, Vancouver, ISO, and other styles
8

Sun, Wen, Qi Zhang, Ou Zhang, Ruyu Zhang, Junru Lin, and Heng Chen. "Energy Consumption Analysis and Optimization of Substation Building in Cold Regions Considering Various Influence Factors." Energies 18, no. 8 (2025): 1948. https://doi.org/10.3390/en18081948.

Full text
Abstract:
Building-energy consumption constitutes a pivotal component of global energy systems, with the heating and cooling loads during the operational phase being particularly significant. Substation building, as nodes in the transmission and transformation network, deserve attention for their building-operating loads. This study investigates heating and cooling loads during substation operation in severe cold climates. By integrating energy consumption simulations with one-factor-at-a-time and orthogonal multivariate analyses, optimization strategies under key influencing factors are systematically
APA, Harvard, Vancouver, ISO, and other styles
9

Sezer, İsmet. "Experimental Investigation of Diesel Engine Characteristics under Various Loads." International Journal of Advanced Natural Sciences and Engineering Researches 7, no. 6 (2023): 145–50. http://dx.doi.org/10.59287/ijanser.1148.

Full text
Abstract:
Internal combustion engines (ICEs) are widely used in the road, sea, air and railway vehicles and stationary such as generators, pumps elevators or agricultural and construction machinery. The features expected from the ICEs differ according to the usage areas. For example; a vehicle engine should operate at a certain lower and upper engine speeds according to the engine load in constant gas condition and the features of the engine should be known in this range. On the other hand, a power plant engine must work at a constant speed under various loads for the electricity produced to be at a des
APA, Harvard, Vancouver, ISO, and other styles
10

Sun, Shiyi, Qingjun Huang, Bingyang Luo, et al. "An Energy-Feed Type Split-Capacitor Three-Phase Four-Wire Power Electronic Load Compatible with Various Load Demands." Energies 17, no. 1 (2023): 119. http://dx.doi.org/10.3390/en17010119.

Full text
Abstract:
Energy-feed power electronic loads can precisely control the phase and magnitude of the power supply output current, achieving the emulation of loads. Moreover, they can feed energy back to the grid for energy regeneration, demonstrating significant research value. This article proposes an energy-fed power electronic load topology and control method that can realize the static and dynamic simulation of linear and non-linear loads and take into account the simulation needs of single-phase, three-phase three-wire, and three-phase four-wire loads. The main circuit uses a two-stage back-to-back AC
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Various Loads"

1

Ogden, Cedric A. "Comparing emissions of a propane engine at various speeds and loads /." Available to subscribers only, 2006. http://proquest.umi.com/pqdweb?did=1240701741&sid=1&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Elliott, Robin James. "Stability and metabolic analysis of walking on cross-slopes with various vertically placed backpack loads and without loads." Thesis, The University of Utah, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10248968.

Full text
Abstract:
<p> Though many who walk along roadside cambers and hill edges may have an interest in making their travels sure and effective, those most concerned may be soldiers in the infantry. They need to be injury free and have as much energy as possible when they march into battle.</p><p> Walking on uneven ground without being injured by falling down (particularly with a heavy backpack) is generally accomplished by maintaining stability. This present study was conducted to determine an individual&rsquo;s most stable position (using a stability formula which compares dynamic center of mass with cente
APA, Harvard, Vancouver, ISO, and other styles
3

Majstorovic, Jordan Mitchell. "Top Tether: Dynamic Loads and the Effects of Various Parameters; Effectiveness in Side Impacts." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429646981.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

SAIYASITPANICH, PHIRUN. "INFLUENCE OF DIFFERENT APPLIED LOADS AND VARIOUS SULFUR LEVELS IN DIESEL FUELS ON DIESEL PARTICULATE EMISSIONS." University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1064408436.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Puszko, Gregory D. "Terramechanical analysis of rover wheel mobility over simulated Martian terrain at various slip conditions and vertical loads." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/83739.

Full text
Abstract:
Thesis (S.B.)--Massachusetts Institute of Technology, Department of Mechanical Engineering, 2013.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 44-45).<br>Unmanned Mars rovers are presented with the unique challenge of requiring autonomous driving control over rough, adverse territory. A software package, dubbed Artemis, was developed in order to model the expected forces and torques on a rover's drive wheels while traveling across unfamiliar Martian terrain. However, experimental testing must be done in order to validate this theoretical model. A test
APA, Harvard, Vancouver, ISO, and other styles
6

Cheong, H. K. "Lateraly confine concrete prisms under various load conditions." Thesis, Imperial College London, 1985. http://hdl.handle.net/10044/1/37658.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rohleder, Schyler. "Performance analysis software for reinforced concrete beam-columns under various load and displacement patterns." Thesis, Kansas State University, 2016. http://hdl.handle.net/2097/34604.

Full text
Abstract:
Master of Science<br>Department of Civil Engineering<br>Asad Esmaeily<br>Performance-based building design is a necessity in geographic locations where buildings are susceptible to large earthquakes and high winds. This design method requires an analysis of the performance of the structural system with loadings and deflections caused by earthquakes and wind. Current design codes include the load intensity in analysis procedures, but do not consider the effect of load pattern in the performance analysis of reinforced concrete columns. Because a thorough analysis must take into consideration loa
APA, Harvard, Vancouver, ISO, and other styles
8

Lou, Chin Wang. "Self-learning and adaptive electric load forecaster tackling various data uncertainties." Thesis, University of Macau, 2015. http://umaclib3.umac.mo/record=b3335456.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Boyko, I. I. "Characteristics of HIV load in various tissues of an infected organism." Thesis, БДМУ, 2020. http://dspace.bsmu.edu.ua:8080/xmlui/handle/123456789/18219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Singh, Yuvraj. "Regression Models to Predict Coastdown Road Load for Various Vehicle Types." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1595265184541326.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Various Loads"

1

Apostolidi, Eftychia, Stephanos Dritsos, Christos Giarlelis, et al. Seismic Isolation and Response Control. Edited by Andreas Lampropoulos. International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/sed019.

Full text
Abstract:
&lt;p&gt;The seismic resilience of new and existing structures is a key priority for the protection of human lives and the reduction of economic losses in earthquake prone areas. The modern seismic codes have focused on the upgrade of the structural performance of the new and existing structures. However, in many cases it is preferrable to mitigate the effects of the earthquakes by reducing the induced loads in the structures using seismic isolation and response control devices. The limited expertise in the selection and design of the appropriate system for new and existing structures is the m
APA, Harvard, Vancouver, ISO, and other styles
2

Pokamestov, Il'ya, Anna Gamilovskaya, Mihal Lednev, Viktoriya Frolova, and Grigoriy Chvanov. Refinancing of trade loans - technologies and financial models. INFRA-M Academic Publishing LLC., 2024. http://dx.doi.org/10.12737/2144525.

Full text
Abstract:
The monographs outline the theoretical and methodological foundations of refinancing trade loans, researching technologies and financial models of such transactions in the innovative economy of various sectors. The features of trade loans, methods of assessing and managing risks in operations of this kind and combating fraud in the trade finance system are highlighted. Rating models and risk management algorithms are used in this area, in particular in factor transactions and functionality.
APA, Harvard, Vancouver, ISO, and other styles
3

Kazimagomedov, Abdulla. Organization of credit work. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1018363.

Full text
Abstract:
The textbook presents theoretical and practical issues related to the organization of credit work of commercial banks with borrowers. The training material on the organization of lending to corporate and individual borrowers, interbank, international and state loans is presented in a short and accessible way, according to the modules. The risks inherent in various types of loans and credit bureaus are considered. In addition, to consolidate the knowledge of students, tasks, control and test questions are given.&#x0D; Meets the requirements of the federal state educational standards of secondar
APA, Harvard, Vancouver, ISO, and other styles
4

Affairs, United States Congress Senate Committee on Veterans'. Veterans Home Loan Revitalization Act of 1992 and various other bills: Hearing before the Committee on Veterans' Affairs, United States Senate, One Hundred Second Congress, second session, on S. 2369, S. 2379, S. 2737, S. 2958, S. 2961, S. 2974, S. 3108, H.R. 939, and H.R. 4368, July 22, 1992. U.S. G.P.O., 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Eberhardshtayner, Yozef, Sergey Leonovich, and Valentin Dorkin. Design models of structural building materials under multiaxial stress. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1082947.

Full text
Abstract:
The monograph presents the results of experimental and theoretical studies of the behavior of wood and concrete of various structures under biaxial and triaxial compression. It contains a systematic classification of existing models for concrete that link three-axis nonlinear elastic stresses and deformations, as well as research and subsequent evaluation of some basic models from the point of view of their possible use in the framework of spatial load analysis using FEM. It is intended for scientific and engineering workers of research and design organizations.
APA, Harvard, Vancouver, ISO, and other styles
6

1940-, Martin Michael, and Associated Management Services, eds. Guide to grants for business: The definitive guide to UK government grants, European Community grants, loans from various sources, local contacts, venture capital, other assistance. Associated Management Services, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

United, States Congress Senate Committee on Banking Housing and Urban Affairs. Housing finance reform: Developing a plan for a smooth transition : hearing before the Committee on Banking, Housing, and Urban Affairs, United States Senate, One Hundred Thirteenth Congress, first session, on examining various options for a transition to a new housing finance system that achieves the accessibility, affordability, and stability goals of housing finance reform while minimizing disruptions to both the primary and secondary mortgage markets, November 22, 2013. U.S. Government Printing Office, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Srivastava, Rajendra Kumar. Srivastava's securitisation & debt recovery laws: Commentaries on Recovery of Debts Due to Banks & Financial Institutions Act, 1993 and Securitisation & Reconstruction of Financial Assets and Enforcement of Security Interest Act, 2002 alongwith Security Interest (Enforcement) Rules, 2002, frequently asked questions & various modes of recovery mechanism, notifications. 6th ed. Law Publishers (India), 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Srivastava, Rajendra Kumar. Srivastava's securitisation & debt recovery laws: Commentaries on Recovery of Debts Due to Banks & Financial Institutions Act, 1993 and Securitisation & Reconstruction of Financial Assets and Enforcement of Security Interest Act, 2002 alongwith Security Interest (Enforcement) Rules, 2002, frequently asked questions & various modes of recovery mechanism, notifications. 6th ed. Edited by Srivastava, A. B., retd. judge. and Lal C. S. Law Publishers (India), 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Srivastava, Rajendra Kumar. Srivastava's securitisation & debt recovery laws: Commentaries on Recovery of Debts Due to Banks & Financial Institutions Act, 1993 and Securitisation & Reconstruction of Financial Assets and Enforcement of Security Interest Act, 2002 alongwith Security Interest (Enforcement) Rules, 2002, frequently asked questions & various modes of recovery mechanism, notifications. 6th ed. Edited by Srivastava, A. B., retd. judge. and Lal C. S. Law Publishers (India), 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Various Loads"

1

Tanuku, Srinivas, and K. Rama Mohana Rao. "Assessment of Wind Loads on Lattice Towers Using Various National Standards." In Lecture Notes in Civil Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1404-3_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Amalu, P. A., and B. R. Jayalekshmi. "A Review on Behavior of Piled Raft Foundations Under Various Loads." In Lecture Notes in Civil Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-5669-9_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Daub, Dennis, Sebastian Willems, Burkard Esser, and Ali Gülhan. "Experiments on Aerothermal Supersonic Fluid-Structure Interaction." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_21.

Full text
Abstract:
Abstract Mastering aerothermal fluid-structure interaction (FSI) is crucial for the efficient and reliable design of future (reusable) launch vehicles. However, capabilities in this area are still quite limited. To address this issue, a multidisciplinary experimental and numerical study of such problems was conducted within SFB TRR 40. Our work during the last funding period was focused on studying the effects of moderate and high thermal loads. This paper provides an overview of our experiments on FSI including structural dynamics and thermal effects for configurations in two different flow r
APA, Harvard, Vancouver, ISO, and other styles
4

Basson, C. I., G. Bright, J. Padayachee, and S. Adali. "Investigation of Predictive Maintenance Algorithms for Rotating Shafts Under Various Bending Loads." In Lecture Notes in Production Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-15602-1_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Salazar, Jonathan, Diego Carrión, and Manuel Jaramillo. "Impact Analysis on Voltage Stability by Inserting Non-Linear Loads Through a Dynamic Stability Index." In Lecture Notes in Networks and Systems. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-87065-1_34.

Full text
Abstract:
Abstract Modern power systems are exposed to various operating conditions that affect the steady-state operation of the system. Several researchers focus on monitoring dynamic loads and their impact on short-term stability, considering factors such as planning, expansion, management, and system capacity through VQ sensitivity analysis, determining the most sensitive bus to reactive power variation. Determining short-term stability helps operators take predictive actions in case of changes in the system, such as the entry of induction machines. The present research is focused on establishing a
APA, Harvard, Vancouver, ISO, and other styles
6

Merarda, Hakim, Mounir Aksas, Amor Gama, Toufik Arrif, and Abd Elfateh Belaid. "Modeling of Wind Loads on Heliostats Installed in South Algeria for Various Pylon Heights." In Exergy for A Better Environment and Improved Sustainability 1. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-62572-0_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Deepa, A., G. Rajyalakshmi, K. Jayakrishna, and R. Gowdaman. "Structural Integrity of Laminates: Fracture Modes I, II, and I/II Under Various Loads." In Fracture Behavior of Nanocomposites and Reinforced Laminate Structures. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-68694-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Honda, Shinya, Yoshihiro Narita, and Katsuhiko Sasaki. "Optimization for the Maximum Buckling Loads of Laminated Composite Plates – Comparison of Various Design Methods." In Advances in Composite Materials and Structures. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.89.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Yuhang, Lixin Shen, and Linxi Wang. "Analysis on Bearing Capacity and Stiffness of Ancient Wooden Architectural Components Under Various Vertical Loads." In Advances in Engineering Research. Atlantis Press International BV, 2025. https://doi.org/10.2991/978-94-6463-780-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Aceto, Luca, Duncan Paul Attard, Adrian Francalanza, and Anna Ingólfsdóttir. "On Benchmarking for Concurrent Runtime Verification." In Fundamental Approaches to Software Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71500-7_1.

Full text
Abstract:
AbstractWe present a synthetic benchmarking framework that targets the systematic evaluation of RV tools for message-based concurrent systems. Our tool can emulate various load profiles via configuration. It provides a multi-faceted view of measurements that is conducive to a comprehensive assessment of the overhead induced by runtime monitoring. The tool is able to generate significant loads to reveal edge case behaviour that may only emerge when the monitoring system is pushed to its limit. We evaluate our framework in two ways. First, we conduct sanity checks to assess the precision of the
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Various Loads"

1

Jia, Yanbo, Wei Chen, Zhaohui Shi, Bingqing Xia, and Lei Zhang. "Comprehensive Sizing of Integrated Wind Solar Storage System with Various Industrial Loads." In 2024 3rd Asian Conference on Frontiers of Power and Energy (ACFPE). IEEE, 2024. https://doi.org/10.1109/acfpe63443.2024.10800940.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Abdelkarim, Chemidi, Shirazul Islam, and Farhad Ilahi Bakhsh. "Harmonic Profile of Various Loads Used in Distribution System of Qatar Utility." In 2024 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2024. https://doi.org/10.1109/pedes61459.2024.10961225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gül, Seyhan, Yavuz Yaman, Muhammed Bilen, Murat Şahin, and Derya Gürak. "A Convergence Study for a Longitudinal Maneuver by Using Various Tools." In Vertical Flight Society 72nd Annual Forum & Technology Display. The Vertical Flight Society, 2016. http://dx.doi.org/10.4050/f-0072-2016-11437.

Full text
Abstract:
This work aims to understand whether the magnitude and time of occurrence of the absolute maximum and maximum oscillatory main rotor blade loads that is achieved in a nonlinear response analysis can be obtained by using a trim method. The latter does not require any controller and it requires less engineering effort and computational time than the former. The comparisons have been made for a pull-up maneuver of a conventional fictitious rotorcraft. Both trim and nonlinear response analyses have been performed by using two different tools, Flightlab® and Dymore®. Flightlab modelled a utility he
APA, Harvard, Vancouver, ISO, and other styles
4

Arini, Nu Rhahida, Muhammad Zaki Nugroho, Arrad Ghani Safitra, and Fahrunnas. "Procedure of Structural Analysis on Steam Turbines in Various Loads for Early Fatigue Failure Detection." In 2024 International Electronics Symposium (IES). IEEE, 2024. http://dx.doi.org/10.1109/ies63037.2024.10665793.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Harjunkoski, Iiro. "Electricity Bidding with Variable Loads." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.156162.

Full text
Abstract:
Processes increasingly need to consider electricity markets, which shifts the traditional demand side management scope towards a more dynamic nature. Instead of only focusing on day-ahead energy trading, demand-side management scope should be broadened towards being able to support the power grid stability during frequency events. This paper studies an artificial example process, similar to the melt-shop process from the steel industry, highlighting the challenges and opportunities of an energy intensive process. We show the potential benefits of having a battery energy storage system on-site,
APA, Harvard, Vancouver, ISO, and other styles
6

Suzuki, Tatsuto, Hironobu Uchiyama, Junichi Kurata, and Kenneth T. V. Grattan. "Investigating the Propelling Wheelchair Behavior Against Various Loads." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-61439.

Full text
Abstract:
The purpose of this study is to solve an attendant’s daily propelling wheelchair behavior, which is based on propelling force and walking speed against loads, for design of wheelchairs and other carts to handle materials. To obtain the propelling behavior, we proposed the model of the attendant propelling the wheelchair, such as the attendant is a motor, and the wheelchair is a load. Along with the model, we carried out experiments to solve the propelling behavior. The experiments were carried out on the ground and on a new type of a treadmill, which can generate various resistant forces. As t
APA, Harvard, Vancouver, ISO, and other styles
7

Rong-Ching Wu and Ta-Peng Tsao. "Condition recognition of induction machine under various loads." In Proceedings of the IEEE 1999 International Conference on Power Electronics and Drive Systems. PEDS'99 (Cat. No.99TH8475). IEEE, 1999. http://dx.doi.org/10.1109/peds.1999.792671.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cruz, Juan, Mike Kandis, and Allen Witkowski. "Opening Loads Analyses for Various Disk-Gap-Band Parachutes." In 17th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar. American Institute of Aeronautics and Astronautics, 2003. http://dx.doi.org/10.2514/6.2003-2131.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Setiawan, Made Andik, and Eko Sulistyo. "DC microgrid based photovoltaics with various voltage loads configurations." In THE 5TH INTERNATIONAL TROPICAL RENEWABLE ENERGY CONFERENCE (THE 5TH iTREC). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0063441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mishra, Debayani, and Manoj Kumar Maharana. "Study of Hybrid Renewable Energy System Under Various Loads." In 2020 International Conference on Computational Intelligence for Smart Power System and Sustainable Energy (CISPSSE). IEEE, 2020. http://dx.doi.org/10.1109/cispsse49931.2020.9212237.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Various Loads"

1

Sharp, Jeremy A., Duncan B. Bryant, and Gaurav Savant. Low-Sill Control Structure Gate Load Study. U.S. Army Engineer Research and Development Center, 2022. http://dx.doi.org/10.21079/11681/44340.

Full text
Abstract:
The effort performed here describes the process to determine the gate lifting loads at the Low-Sill Control Structure. To measure the gate loads, a 1:55 Froude-scaled model of the Low-Sill Control Structure was tested. Load cells were placed on 3 of the 11 gates. Tests evaluated the gate loads for various hydraulic heads across the structure. A total of 109 tests were conducted for 14 flows with each flow having two gate settings provided by the United States Army Corps of Engineers, New Orleans District. The load data illustrated the potential for higher gate lifting loads (GLL) to occur at t
APA, Harvard, Vancouver, ISO, and other styles
2

Warman, Hart, and Francini. CEPA-05-44R1 Pipeline Surface Loading Screening Process and Assessment of Surface Load Dispersing Methods. Pipeline Research Council International, Inc. (PRCI), 2009. http://dx.doi.org/10.55274/r0011080.

Full text
Abstract:
This effort evaluates methods used to calculate loads on pipelines including API 1102, especially with respect to shallow cover situations. The effort focus on the feasibility oa a phased analysis approach that would eliminate the need to perform detailed calculations in many cases. It also addressed using various temporary load-spreading measures and other mitigation techniques to identify which methods are the most effective.
APA, Harvard, Vancouver, ISO, and other styles
3

Issa, Mohsen, Ali Alawieh, and Hussein Daoud. Concrete Bridge Deck Crack Sealing. Illinois Center for Transportation, 2024. http://dx.doi.org/10.36501/0197-9191/24-007.

Full text
Abstract:
Bridge decks are prone to various types of cracking due to a combination of factors, including traffic loads, temperature variations, moisture, and chemical exposure. This report tackles the critical issue of bridge deck cracking by systematically dissecting the problem, exploring various crack types, and emphasizing the crucial inspection and categorization of cracks for effective remediation planning. The report focuses on the selection of appropriate sealants, considering regional conditions. It delves into remediation treatments, offering a spectrum of options based on National Bridge Inve
APA, Harvard, Vancouver, ISO, and other styles
4

Stott, Alexander, Caitlin Callaghan, Douglas Punt, and Tyler Elliott. Cold impacts on vehicle electrical systems : developing a baseline for cold testing military vehicles. Engineer Research and Development Center (U.S.), 2023. http://dx.doi.org/10.21079/11681/47594.

Full text
Abstract:
Low temperatures can significantly affect vehicle operation. While many of the effects, like increased fluid viscosity and decreased battery capacity, are well documented, the impacts on the electrical system as a whole are not. The objective of this study was to investigate the impacts of tempera-ture on the electrical systems of select military vehicles and to develop a baseline for future testing. A High Mobility Multipurpose Wheeled Vehicle (HMMWV), a Heavy Expanded Mobility Tactical Truck (HEMTT), and a four-person diesel Polaris MRZR D4 were subjected to 15°C, 0°C, and −15°C temperatures
APA, Harvard, Vancouver, ISO, and other styles
5

Author, Unknown. PR-203-027-R01 Evaluation of Screen Testing Program for J-Lay Connections. Pipeline Research Council International, Inc. (PRCI), 1992. http://dx.doi.org/10.55274/r0012125.

Full text
Abstract:
This report discusses the results of a testing program designed to simulate the operational conditions imposed on a J-lay installed, 13%" subsea pipeline assembled with mechanical connections. The program objective was to gain an understanding of the long-term sealing integrity of various mechanical connections. The connections were subjected to combinations of cyclic internal pressure, cyclic temperature, axial compression, and reverse torsion. The testing results show that the mechanically interlocked Reflange C-Con II connection and two premium threaded connections, the Hunting Fox and Sumi
APA, Harvard, Vancouver, ISO, and other styles
6

Mohr, H. O. PR-209-9217-R01 Mechanical Connections for J-lay. Pipeline Research Council International, Inc. (PRCI), 1994. http://dx.doi.org/10.55274/r0012126.

Full text
Abstract:
This report discusses the results of a testing program designed to simulate the operational conditions imposed on a J-lay installed, 13%" subsea pipeline assembled with mechanical connections. The program objective was to gain an understanding of the long-term sealing integrity of various mechanical connections. The connections were subjected to combinations of cyclic internal pressure, cyclic temperature, axial compression, and reverse torsion. The testing results show that the mechanically interlocked Reflange C-Con II connection and two premium threaded connections, the Hunting Fox and Sumi
APA, Harvard, Vancouver, ISO, and other styles
7

Honegger. L51990 Extended Model for Pipe Soil Interaction. Pipeline Research Council International, Inc. (PRCI), 2003. http://dx.doi.org/10.55274/r0010152.

Full text
Abstract:
This program contributes to maintaining and improving the integrity and safety of existing pipelines with regard to ground movement hazards, and reducing the capital costs of new pipeline systems. The research program focused on the axial, lateral and complex loading of pipeline due to soil movements. It includes (1) a literature review: it presents significant issues related to modeling pipe-soil interaction with a focus to recent development since ASCE (1984); (2) axial loading: it includes a summary of the methods to estimate the axial soil forces on pipeline and recent field measurements o
APA, Harvard, Vancouver, ISO, and other styles
8

Stakes, Keith, and Joseph Willi. Study of the Fire Service Training Environment: Safety, Fidelity, and Exposure -- Acquired Structures. UL Firefighter Safety Research Institute, 2019. http://dx.doi.org/10.54206/102376/ceci9490.

Full text
Abstract:
Previous FSRI led research projects have focused on examining the fire environment with regards to current building construction methods, synthetic fuel loading, and best-practices in firefighting strategies and tactics. More than 50 experiments have been previously conducted utilizing furniture to produce vent-limited fire conditions, replicating the residential fire environment, and studying the methods of horizontal ventilation, vertical ventilation, and positive pressure attack. Tactical considerations generated from the research are intended to provide fire departments with information to
APA, Harvard, Vancouver, ISO, and other styles
9

Lippert, David, Marshall Thompson, and Charles Wienrank. Performance of Interstate Rubblization in Illinois. Illinois Center for Transportation, 2021. http://dx.doi.org/10.36501/0197-9191/21-005.

Full text
Abstract:
In Illinois, hot-mix asphalt overlaid concrete pavements typically exhibit reflective cracking of joints and cracks from the pavement below, resulting in shortened life and maintenance issues. Over the years, various patching, fabric, and crack and seat techniques were attempted with few positive results. This led to more aggressive techniques to eliminate the slab action of the concrete pavement where the pavement would be broken or rubblized into pieces typically less than 12 inches. Since the first rubblizing project in 1990, policy, procedures, and specifications have evolved to the point
APA, Harvard, Vancouver, ISO, and other styles
10

Inc., Kellogg Brown and Root. L51989 Submarine Pipeline On-Bottom Stability-Volume 1-Analysis and Design Guidelines. Pipeline Research Council International, Inc. (PRCI), 2002. http://dx.doi.org/10.55274/r0011168.

Full text
Abstract:
The state-of-the-art in Pipeline stability design has been changing very rapidly recently. The physics governing on-bottom stability are much better understood now than they were eight years ago. This is due largely because of research and large scale model tests sponsored by PRCI. Analysis tools utilizing this new knowledge have been developed. These tools provide the design engineer with a rational approach for weight coating design, which he can use with confidence because the tools have been developed based on full scale and near full scale model tests. These tools represent the state-of-t
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Various Loads' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography