To see the other types of publications on this topic, follow the link: Vibration-inertial methods.

Journal articles on the topic 'Vibration-inertial methods'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Vibration-inertial methods.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Muhammad, Shoaib, Shuai Wang, Fengming Li, and Chuanzeng Zhang. "Bandgap enhancement of periodic nonuniform metamaterial beams with inertial amplification mechanisms." Journal of Vibration and Control 26, no. 15-16 (2020): 1309–18. http://dx.doi.org/10.1177/1077546319895630.

Full text
Abstract:
The aim of this study was to obtain bandgaps that are much better, that is at lower frequencies and in broader frequency ranges. Novel nonuniform metamaterial beams with periodically variable cross sections and inertial amplification mechanisms are designed and investigated by numerical and experimental methods. Flexural vibration equations of the nonuniform metamaterial beams are established, and the enhanced bandgap and vibration reduction properties are achieved by combining Bragg scattering and the inertial amplification mechanisms. Numerical results of the bandgaps for the periodic elasti
APA, Harvard, Vancouver, ISO, and other styles
2

Homma, Takahiro, and Hiroshi Yamaura. "Evaluating Inertial Parameter Uncertainty in High-Acceleration Movements and Improving Predictions Through Identification Using Free Vibration Measurements." Biomechanics 5, no. 1 (2025): 18. https://doi.org/10.3390/biomechanics5010018.

Full text
Abstract:
Background/Objectives: This study aimed to examine how uncertainties in inertial properties and minimal sets of inertial parameters (MSIP) affect inverse-dynamics simulations of high-acceleration sport movements and to demonstrate that applying MSIP identified through the free vibration measurement method improves simulation accuracy. Methods: Monte Carlo simulations were performed for running, side-cutting, vertical jumping, arm swings, and leg swings by introducing uncertainties in inertial properties and MSIP. Results: These uncertainties significantly affect the joint torques and ground re
APA, Harvard, Vancouver, ISO, and other styles
3

Sun, He, Fan Li, and Jian Hui Zhao. "Application of Intelligent Materials in Vibration Control for Strapdown Inertial Navigation System." Advanced Materials Research 804 (September 2013): 275–78. http://dx.doi.org/10.4028/www.scientific.net/amr.804.275.

Full text
Abstract:
This paper investigated the vibration control based on intelligent materials for strapdown inertial navigation system (SINS) from theoretical analysis to simulation verification. At first, significance of vibration control in SINS and the disadvantages of the traditional vibration control methods were set forth. Then, intelligent material and structure were introduced to improve the situation. A method of combining active and passive vibration control based on piezoelectric ceramic had been put forward. Through modeling and designing PID and fuzzy PID controller separately, the simulation resu
APA, Harvard, Vancouver, ISO, and other styles
4

Hongjin, Wang, Meng Qingfeng, and Feng Wuwei. "Discussion of the Improved Methods for Analyzing a Cantilever Beam Carrying a Tip-Mass under Base Excitation." Shock and Vibration 2014 (2014): 1–15. http://dx.doi.org/10.1155/2014/981053.

Full text
Abstract:
Two improved analytical methods of calculations for natural frequencies and mode shapes of a uniform cantilever beam carrying a tip-mass under base excitation are presented based on forced vibration theory and the method of separation of variables, respectively. The cantilever model is simplified in detail by replacing the tip-mass with an equivalent inertial force and inertial moment acting at the free end of the cantilever based on D’Alembert’s principle. The concentrated equivalent inertial force and inertial moment are further represented as distributed loads using Dirac Delta Function. In
APA, Harvard, Vancouver, ISO, and other styles
5

Povkolas, K. E. "Evaluation of Effectiveness on Some Vibration Isolation Methods for Existing Buildings and Structures from Vibrodynamic Effects, Propagating in Soil Environment." Science & Technique 22, no. 2 (2023): 131–40. http://dx.doi.org/10.21122/2227-1031-2023-22-2-131-140.

Full text
Abstract:
The paper presents calculations of various design schemes for vibration isolation of a building with a reinforced concrete frame from a source of vibrodynamic exposure located outside it. It is noted that in most studies, the maximum value of the velocity of vertical vibrations of the foundation or soil in front of it is used as a criterion for the risk of damage to load-bearing building structures. The main factors that determine the risk of damage to structures are identified. These include the engineering and geological conditions of the soil at the base of the affected foundations, the deg
APA, Harvard, Vancouver, ISO, and other styles
6

ПОЛІЩУК, ЛЕОНІД, та ВІТАЛІЙ КУДРАШ. "ВИБІР РАЦІОНАЛЬНОГО ТИПУ ВІБРОЗБУДУЖУВАЧА ДЛЯ ІНЕРЦІЙНИХ ВИБИВНИХ РЕШІТОК". Herald of Khmelnytskyi National University. Technical sciences 343, № 6(1) (2024): 124–29. https://doi.org/10.31891/2307-5732-2024-343-6-18.

Full text
Abstract:
Casting is one of the most common methods of producing workpieces in the machine building and other industries. In particular, sand mold casting is the most common method for ferrous and non-ferrous metals. This casting method requires subsequent knocking out of the castings from the molds and pans, which is a complex technological operation that requires the use of various types of appropriate vibrating equipment, including inertial knockout grids. Automation and continuous development of production sets tasks for the modernization of vibrating equipment and the development of new design solu
APA, Harvard, Vancouver, ISO, and other styles
7

Bai, Weigang, Wenwu Feng, Peigen Wang, Ziliang Zhang, and Guoying Zhao. "Research on Interferometric Tilt Sensor for Vibration Isolation Platform." Sensors 25, no. 6 (2025): 1777. https://doi.org/10.3390/s25061777.

Full text
Abstract:
Low-frequency seismic vibrations extremely limit the performance of ground simulation facilities for space-borne gravitational wave detections, which need to be substantially suppressed. Active vibration systems are thus required. However, the tilt-translation coupling of inertial sensors strongly limits the performance of vibration isolation platforms in the low frequency range, which requires a precise measurement of the low-frequency tilt signal. This study compares two methods for the tilt signal measurement: the differential-mode method and the direct method. The differential-mode method
APA, Harvard, Vancouver, ISO, and other styles
8

Weber, Mark W. "Adaptive circuits and methods for reducing vibration or shock induced errors in inertial sensors." Journal of the Acoustical Society of America 126, no. 2 (2009): 933. http://dx.doi.org/10.1121/1.3204345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shakurova, R. Z., S. O. Gaponenko, and A. E. Kondratiev. "Technique for operational diagnosis of pipelines of energy systems and complexes." Power engineering: research, equipment, technology 22, no. 6 (2021): 188–201. http://dx.doi.org/10.30724/1998-9903-2020-22-6-188-201.

Full text
Abstract:
THE PURPOSE. To consider the problems of reliability of pipeline systems of housing and communal services. To analyze existing methods for assessing the technical condition of pipelines. To develop an improved technique that allows you to search for various types of defects in pipelines. To develop a device for inertial excitation of low-frequency diagnostic vibration vibrations. To develop software in the LabVIEW environment for collecting, storing and processing signals from a sensitive sensor (piezoelectric sensor) installed on a pipeline. To conduct a series of experimental studies to te s
APA, Harvard, Vancouver, ISO, and other styles
10

Song, Gangbing, Hong-Nan Li, and Steve C. S. Cai. "Editorial for Special Issue “Energy Dissipation and Vibration Control: Materials, Modeling, Algorithm, and Devices”." Applied Sciences 10, no. 2 (2020): 572. http://dx.doi.org/10.3390/app10020572.

Full text
Abstract:
Many engineering systems, from subsea pipelines to space structures, from moving vehicles to stationary skyscrapers, are subject to unwanted vibration excitations. Often vibration control can be considered as a problem of energy dissipation and vibration damping. The aims of this issue are to accumulate, disseminate, and promote new knowledge about vibration control, especially for topics related to energy dissipation methods for vibration damping. Topics in this issue reflect the start-of-the-arts in the field of vibration control, such as inerter dampers and pounding tuned mass dampers (PTMD
APA, Harvard, Vancouver, ISO, and other styles
11

Melnik, O. V., and V. V. Soroka. "Vibration diagnostics of the main power plant of vessels: improvement and integration of methods." Reporter of the Priazovskyi State Technical University. Section: Technical sciences, no. 47 (December 28, 2023): 349–59. http://dx.doi.org/10.31498/2225-6733.47.2023.300121.

Full text
Abstract:
The study is devoted to the development of a comprehensive approach to vibration diagnostics of the main power plant of water transport vehicles. The method of automatic processing of narrowband spectra is being improved. The method of automatic adaptation of threshold values for timely detection of changes in technical condition against the background of natural monotonous changes in vibration parameters characteristic of ship conditions is being improved. In the course of the study, the peculiarities of the spectra of vibration signals of rotary equipment were formulated and their analysis w
APA, Harvard, Vancouver, ISO, and other styles
12

Morison, Chris, Anbin Wang, and Oliver Bewes. "Methods for Measuring the Dynamic Stiffness of Resilient Rail Fastenings for Low Frequency Vibration Isolation of Railways, Their Problems and Possible Solutions." Journal of Low Frequency Noise, Vibration and Active Control 24, no. 2 (2005): 107–15. http://dx.doi.org/10.1260/0263092054530993.

Full text
Abstract:
Low frequency ground or structure-borne sound and vibration emission from urban rail transport systems can be greatly reduced by reducing the stiffness of the rail fastening. Estimates and models of the efficacy of such systems require accurate measurements of their dynamic stiffness over the frequency range of interest, and European Standards make recommendations for such measurements. This paper describes these methods and their shortcomings when applied to modern complete assemblies with low stiffness, one problem of which is the contribution of inertial forces at frequencies approaching an
APA, Harvard, Vancouver, ISO, and other styles
13

Ryu, Kyungdon, ByungSu Park, Hyungsub Lee, Kyungjun Han, and Sangwoo Lee. "A Study on the Design of Isolator and the Mounting Method for Reducing the Pyro-Shock of a MEMS IMU." Sensors 22, no. 13 (2022): 5037. http://dx.doi.org/10.3390/s22135037.

Full text
Abstract:
In this paper, we proposed two methods for reducing the pyro-shock of the MEMS Inertial Measurement Unit (IMU). First, we designed the vibration isolator for reducing the pyro-shock inside the IMU. However, it turned out that there is a limit to reducing the pyro-shock with only the vibration isolator. Therefore, we improved the pyro-shock reduction performance by changing the method of mounting on the flight vehicle. Four mounting options were tested and one of them was adopted. The results showed the best reduction performance when we designed the vibration isolator with an aluminum integrat
APA, Harvard, Vancouver, ISO, and other styles
14

POVKOLAS, K. "METHOD FOR PREDICTION OF DAMAGE TO BUILDING STRUCTURES OF BUILDINGS AND STRUCTURES UNDER VIBRODYNAMIC IMPACTS TRANSMITTED THROUGH THE GROUND ENVIRONMENT, AND WAYS TO ELIMINATE THEM." Herald of Polotsk State University. Series F. Civil engineering. Applied sciences, no. 2 (October 31, 2023): 32–37. http://dx.doi.org/10.52928/2070-1683-2023-34-2-32-37.

Full text
Abstract:
A method for determining the possibility of damage to the building structures of buildings and structures in the case of transmission of vibrodynamic effects on them through the foundation from external vibration sources is proposed. The essence of the technique is to determine the maximum vibration speed of the foundation and the soil in front of it by the finite element method, followed by a comparison of the obtained value with the limited vibration speed. Based on this comparison, 4 possible options are considered: there are no damages, minor, significant or critical defects appear. In the
APA, Harvard, Vancouver, ISO, and other styles
15

Korendiy, Vitaliy, Volodymyr Gurey, Volodymyr Borovets, Oleh Kotsiumbas, and Vasyl Lozynskyy. "Generating various motion paths of single-mass vibratory system equipped with symmetric planetary-type vibration exciter." Vibroengineering PROCEDIA 43 (June 13, 2022): 7–13. http://dx.doi.org/10.21595/vp.2022.22703.

Full text
Abstract:
Vibration exciters are of the most important parts of vibratory technological equipment. Among a great variety of exciters, the inertial ones are currently the most widely used due to their design simplicity, well-studied control techniques, and relatively large efficiency. The present paper deals with a prospective type of inertial exciters based on a planetary mechanism. The main purpose of this research consists in substantiating the possibilities of providing triangular, rectangular, hexagonal, and other paths of oscillations of a single-mass vibratory system driven by a symmetric planetar
APA, Harvard, Vancouver, ISO, and other styles
16

Kutenev, V. F., A. A. Nikitin, and A. I. Yamanin. "Vibrodynamic parameters of radial piston engines with Pencake mechanism." Trudy NAMI, no. 2 (July 4, 2022): 6–13. http://dx.doi.org/10.51187/0135-3152-2022-2-6-13.

Full text
Abstract:
Introduction (problem statement and relevance). The development of calculation methods at the design stage of the balance and vibration activity of multipurpose converting mechanisms of engines differing in the classical crank mechanism is actual.The purpose of the work was to substantiate such a technique for a FSUE “NAMI” three-cylinder radial engine with a Pencake conversion mechanism designed to drive electric generators.Methodology and research methods. To solve the problem, both classical methods of piston engine dynamics and modern methods based on solid modeling and simulation of force
APA, Harvard, Vancouver, ISO, and other styles
17

Pham, D. T., and S. Sagiroglu. "Three methods of training multi-layer perceptrons to model a robot sensor." Robotica 13, no. 5 (1995): 531–38. http://dx.doi.org/10.1017/s0263574700018373.

Full text
Abstract:
SummaryThis paper discusses three methods of training multi-layer perceptrons (MLPs) to model a six-degrees-of- freedom inertial sensor. Such a sensor is designed for use with a robot to determine the location of objects it has to pick up. The sensor operates by measuring parameters related to the inertia of an object and computing its location from those parameters. MLP models are employed for part of the computation. They are trained to output the orientation of the object in response to an input pattern that includes the period of natural vibration of the sensor on which the object rests. A
APA, Harvard, Vancouver, ISO, and other styles
18

Korendiy, Vitaliy, Igor Kuzio, Serhij Nikipchuk, Oleh Kotsiumbas, and Petro Dmyterko. "On the dynamic behavior of an asymmetric self-regulated planetary-type vibration exciter." Vibroengineering PROCEDIA 42 (May 16, 2022): 7–13. http://dx.doi.org/10.21595/vp.2022.22580.

Full text
Abstract:
The problems of studying the dynamic behavior and improving the operational efficiency of various vibratory equipment are currently of significant interest. Special attention is paid to the possibilities of developing the enhanced designs of the planetary-type vibration exciters for the conveying, screening, and sieving machines. The novelty of the present research consists in providing the changeable inertial parameters of the improved planetary-type vibration exciter in order to adjust its operational conditions in accordance with the technological requirements. The mathematical model of the
APA, Harvard, Vancouver, ISO, and other styles
19

Li, Luyu, Qigang Liang, and Han Qin. "Equivalent Linearization Methods for a Control System with Clutching Inerter Damper." Applied Sciences 9, no. 4 (2019): 688. http://dx.doi.org/10.3390/app9040688.

Full text
Abstract:
Inerter-based dampers have gained great popularity in structural vibration control. In this paper, equivalent linearization methods (ELMs) for a single-degree-of-freedom (SDOF) system with a clutching inerter damper (CID) are studied. The comparison of a SDOF system with a CID and an inertial mass damper (IMD) shows the advantage of the CID. Considering that the system with the CID is nonlinear, which is problematic for its performance evaluation and the integrated design of the structure and control system, three equivalent linearization methods based on different principles are proposed and
APA, Harvard, Vancouver, ISO, and other styles
20

Olena, Dzhedzhula. "Features of vibration mixers design." Vibrations in engineering and technology, no. 4(95) (December 20, 2019): 24–30. http://dx.doi.org/10.37128/2306-8744-2019-4-3.

Full text
Abstract:
The article presents the results of the analysis of vibration mixers designs, presents their classification. The classification is based on the principle of action and the method of mixing. Practice has shown that mixing by vibration produces a significant effect. With vibrational mixing, all the expected components are evenly distributed throughout the volume of the mixture. The main disadvantage of the vibration method is the negative impact on the design of the mixer, as well as on the environment and humans. The problems that complicate the design of vibration mixers include a wide range o
APA, Harvard, Vancouver, ISO, and other styles
21

Afonin, Alexander A., Andrey S. Sulakov, and M. S. Maamo. "On the application of estimation and correction algorithms in the system for measuring vibration parameters of aircraft structural elements." Analysis and data processing systems, no. 4 (December 27, 2021): 73–84. http://dx.doi.org/10.17212/2782-2001-2021-4-73-84.

Full text
Abstract:
Nowadays, high-precision measurement of aircraft vibration parameters during its main operations modes, including in-flight operation mode, is still considered an important scientific and technical field of study and research. These kinds of measurements are usually conducted in order to analyze the airplane vibration properties and characteristics, which serves in diagnosing the state of its structure, predicting the appearance and development of defects and deformations, as well as to prevent or avoid the influence of dangerous phenomena such as flutter, buffeting, etc. In this article, the
APA, Harvard, Vancouver, ISO, and other styles
22

Chikovani, Valeri, and Serhii Golovach. "Vibratory Gyroscope Scale Factor and Bias on-Run Self-calibration." Electronics and Control Systems 3, no. 69 (2021): 16–27. http://dx.doi.org/10.18372/1990-5548.69.16423.

Full text
Abstract:
А new method for on-run periodic scale factor and bias self-calibration of vibratory gyroscopes in an inertial measurement unit with a redundant number of sensors is proposed. Self-calibration uses predefined virtual positive and negative angle rates to calibrate the SF, and the bias of the gyroscope that is in calibration mode, while the others, at least three gyroscopes of an inertial measurement unit, whose sensitivity axes do not lie in the same plane, operate in the measurement mode to measure the real angle rate of a vehicle. The projection of the current angle rate onto the sensitivity
APA, Harvard, Vancouver, ISO, and other styles
23

Perera, M. S. M., S. Theodossiades, and H. Rahnejat. "A multi-physics multi-scale approach in engine design analysis." Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 221, no. 3 (2007): 335–48. http://dx.doi.org/10.1243/14644193jmbd78.

Full text
Abstract:
Vibration behaviour of an internal combustion engine depends on rigid body inertial dynamics, structural modal characteristics of its elastic members, tribological behaviour of loadbearing contacts, and piston-cylinder interactions. Therefore, it is essential to use a multi-physics approach that addresses all these physical properties in a single integrative model as presented in this paper. This approach can be regarded as holistic and a good aid for detailed design. Particular attention is paid to the critical elements in the system, such as load-bearing conjunctions (crankshaft main bearing
APA, Harvard, Vancouver, ISO, and other styles
24

Dobashi, Yume, and Ryuta Sato. "Positioning Command Design Method to Minimize Residual Vibration and Positioning Time." International Journal of Automation Technology 19, no. 4 (2025): 470–79. https://doi.org/10.20965/ijat.2025.p0470.

Full text
Abstract:
In industrial applications such as numerical control machine tools and robots, high-speed positioning operations are always required to improve productivity. However, high-speed positioning operations cause residual vibration owing to the inertial force of the driven object. To suppress this vibration, researchers have proposed adjusting the time constant and/or applying filters for the positioning command; these are generally applied in the field. However, the acceleration and deceleration time increases when the conventional vibration-suppression methods are applied to suppress lower frequen
APA, Harvard, Vancouver, ISO, and other styles
25

Zhang, Wanpeng, Dailin Zhang, Peng Zhang, and Lei Han. "A New Fusion Fault Diagnosis Method for Fiber Optic Gyroscopes." Sensors 22, no. 8 (2022): 2877. http://dx.doi.org/10.3390/s22082877.

Full text
Abstract:
The fiber optic gyroscope (FOG) is a high precision inertial navigation device, and it is necessary to ensure its reliability for effective use. However, the extracted fault features are easily distorted due to the interference of vibrations when the FOG is in operation. In order to minimize the influence of vibrations to the greatest extent, a fusion diagnosis method was proposed in this paper. It extracted features from fault data with Fast Fourier Transform (FFT) and wavelet packet decomposition (WPD), and built a strong diagnostic classifier with a sparse auto encoder (SAE) and a neural ne
APA, Harvard, Vancouver, ISO, and other styles
26

GOROSHKO, Andrii, Igor KOVTUN, and Maryna ZEMBYTSKA. "IMPROVING THE ACCURACY OF THE VIBRATION ANALYSIS OF ON-BOARD ELECTRONICS PRINTED BOARDS." Herald of Khmelnytskyi National University. Technical sciences 313, no. 5 (2022): 301–6. http://dx.doi.org/10.31891/2307-5732-2022-313-5-301-306.

Full text
Abstract:
Electronic equipment of aircraft during operation is exposed to vibrations with a frequency of 20-2000 Hz and a vibration acceleration of up to 20g. Almost half of all failures of on-board equipment are caused by the negative impact of vibration. For effective vibration protection of the equipment during its design, a vibration analysis is carried out, recognizing resonance modes. The difficulty of modeling vibration processes in printed circuit boards lies in the deviation of calculated values of critical frequencies and values obtained experimentally with the help of shakers. The main reason
APA, Harvard, Vancouver, ISO, and other styles
27

Bryakin, I. V., and I. V. Bochkarev. "Measuring device for systems of technical vibro-diagnosis of power equipment." Power engineering: research, equipment, technology 25, no. 2 (2023): 137–52. http://dx.doi.org/10.30724/1998-9903-2023-25-2-137-152.

Full text
Abstract:
RELEVANCE. Among the various methods for assessing the technical condition of power equipment, vibration diagnostics occupies an important place. Therefore, improving the quality of hardware for vibration diagnostics is currently extremely important. THE PURPOSE. To develop a vibration sensor with a new principle of operation for systems of technical vibration diagnostics of power equipment, as well as to theoretically substantiate the performance of the proposed sensor. METHODS. When solving the set goal, the main provisions of the theory of vibration diagnostics were applied. RESULTS. A desi
APA, Harvard, Vancouver, ISO, and other styles
28

Gaile, Liga, and Ivars Radins. "EVALUATION OF VIBRATION-BASED GLOBAL STRUCTURAL HEALTH MONITORING METHOD FOR MEDIUM-RISE BUILDINGS." ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference 1 (June 16, 2021): 55–61. http://dx.doi.org/10.17770/etr2021vol1.6598.

Full text
Abstract:
The automated monitoring of a building’s structural health during its exploitation is a way to extend its design life without compromising structural safety. In turn, it helps increase the rate of building renovation works compared to demolition works, which reduces future construction and demolition waste levels.This research explores the vibration-based global monitoring method application to structurally stiff medium-rise reinforced concrete buildings by analysing predicted building vibration amplitudes and spectrum under regular city traffic excitation. These predictions are based on the r
APA, Harvard, Vancouver, ISO, and other styles
29

Dong, Xin, Ziyu Wang, Fangyuan Liu, et al. "Visual-Inertial Cross Fusion: A Fast and Accurate State Estimation Framework for Micro Flapping Wing Rotors." Drones 6, no. 4 (2022): 90. http://dx.doi.org/10.3390/drones6040090.

Full text
Abstract:
Real-time and drift-free state estimation is essential for the flight control of Micro Aerial Vehicles (MAVs). Due to the vibration caused by the particular flapping motion and the stringent constraints of scale, weight, and power, state estimation divergence actually becomes an open challenge for flapping wing platforms’ longterm stable flight. Unlike conventional MAVs, the direct adoption of mature state estimation strategies, such as inertial or vision-based methods, has difficulty obtaining satisfactory sensing performance on flapping wing platforms. Inertial sensors offer high sampling fr
APA, Harvard, Vancouver, ISO, and other styles
30

Behrens, Bernd Arno, Richard Krimm, and Valerian Salfeld. "New Methods to Reduce the Vibrations of the Ram and the Press Body while Blanking of Sheet Metal." Key Engineering Materials 549 (April 2013): 277–83. http://dx.doi.org/10.4028/www.scientific.net/kem.549.277.

Full text
Abstract:
The press frame vibrations of a stamping press due to the high number of strokes, as well as the vibrations of the ram caused by the cutting impact have a great influence on the economy of a blanking process. The following contribution presents the state of the art regarding the compensation of these and explains the disadvantages of the existent solutions briefly. Based on this overview, two methods are presented to overcome the disadvantages. The first method introduces the vibration compensation of a press body by means of an auto-adaptive mass balancing system. Consisting of four linear mo
APA, Harvard, Vancouver, ISO, and other styles
31

Li, Hui, John Harvey, Zhang Chen, et al. "Measurement of Pavement Treatment Macrotexture and Its Effect on Bicycle Ride Quality." Transportation Research Record: Journal of the Transportation Research Board 2525, no. 1 (2015): 43–53. http://dx.doi.org/10.3141/2525-05.

Full text
Abstract:
This paper summarizes the results of measurements of macrotexture on a set of California Department of Transportation (Caltrans) and local government pavement surface treatments and their correlation with survey results of bicycle vibration and ride quality on the same sections. The test sections that were used for the bicycle vibration and ride quality measurements included various surface treatments placed on an existing chip seal on SR-198 in Monterey County, a chip seal on SR-1 in San Luis Obispo County, and several other sections with various textures and roughness levels on other state h
APA, Harvard, Vancouver, ISO, and other styles
32

Pereira, Emiliano, Xidong Wang, Iván M. Díaz, and Sumeet S. Aphale. "Design and Implementation of a MIMO Integral Resonant Control for Active Vibration Control of Pedestrian Structures." Applied Sciences 14, no. 15 (2024): 6784. http://dx.doi.org/10.3390/app14156784.

Full text
Abstract:
In contemporary construction, the prevalence of vibration serviceability issues in lightweight and slender structures has become increasingly common, owing to advancements in building materials and construction methods. While these structures often meet the criteria for ultimate limit states, they can still elicit complaints due to excessive vibrations induced by human activity. To address this challenge, the integral resonant control (IRC) technique has emerged as a favored approach for actively damping vibrations in various systems. This study introduces a fresh perspective by proposing the
APA, Harvard, Vancouver, ISO, and other styles
33

Ungnad, Steffen, Delf Sachau, Carsten Zerbs, Andreas Müller, and Anton Homm. "Experimental Investigation into the Active Narrowband Reshaping of a Ship Model’s Acoustic Signature." Acoustics 7, no. 2 (2025): 34. https://doi.org/10.3390/acoustics7020034.

Full text
Abstract:
The use of inertial actuators to control the radiated sound pressure of a steel ship model at a lake measurement facility is examined. Therefore, methods of active vibration control as well as active control of target sound fields are applied using a fixed configuration of twelve accelerometers, eight control actuators, and five hydrophones. A narrowband feedforward active control system is used to manipulate the sound pressure at hydrophone positions, focusing not only on reducing but also on adding spectral lines in the radiated signature. The performance is assessed using measured data by a
APA, Harvard, Vancouver, ISO, and other styles
34

Tolstosheev, Andrey. "ANALYSIS OF OWN FREQUENCIES AND OSCILLATION FORMS OF A PLANE PARALLEL MANIPULATOR." Transport engineering 2022, no. 12 (2022): 36–47. http://dx.doi.org/10.30987/2782-5957-2022-12-36-47.

Full text
Abstract:
The study objective is to analyze the own frequencies and small-amplitude oscillations of a plane manipulator having parallel structure and to determine the influence of elastic and inertial properties of intermediate links and the drive on own frequencies and forms. The paper is devoted to solving the problem of ensuring vibration stability of manipulators. Analytical methods of the theory of oscillations and computational experiments in the software package "Universal Mechanism" are used. The novelty of the work is in defining the dependence of the own frequencies and oscillation forms of a
APA, Harvard, Vancouver, ISO, and other styles
35

Афонин, А. А., А. С. Сулаков, and М. Ш. Маамо. "ANALYSIS OF THE capabilities OF the CLOSED-OPEN SYSTEM CORRECTION scheme FOR MEASURING VIBRATIONS OF AIRCRAFT STRUCTURal ELEMENTS." Южно-Сибирский научный вестник, no. 6(40) (December 20, 2021): 62–68. http://dx.doi.org/10.25699/sssb.2021.40.6.020.

Full text
Abstract:
В настоящее время в связи со всевозрастающей степенью сложности проектирования, производства и эксплуатации летательных аппаратов все более важным направлением в области развития информационно-измерительных систем становится совершенствование существующих и разработка новых способов измерения параметров вибрации элементов механических конструкций летательных аппаратов. Целью данной работы является анализ возможности и перспективности построения системы для измерения вибраций элементов конструкции самолета на основе использования микромеханических инерциальных измерительных блоков в качестве ос
APA, Harvard, Vancouver, ISO, and other styles
36

Łuczak, Dominik. "Data-Driven Machine Fault Diagnosis of Multisensor Vibration Data Using Synchrosqueezed Transform and Time-Frequency Image Recognition with Convolutional Neural Network." Electronics 13, no. 12 (2024): 2411. http://dx.doi.org/10.3390/electronics13122411.

Full text
Abstract:
Accurate vibration classification using inertial measurement unit (IMU) data is critical for various applications such as condition monitoring and fault diagnosis. This study proposes a novel convolutional neural network (CNN) based approach, the IMU6DoF-SST-CNN in six variants, for robust vibration classification. The method utilizes Fourier synchrosqueezed transform (FSST) and wavelet synchrosqueezed transform (WSST) for time-frequency analysis, effectively capturing the temporal and spectral characteristics of the vibration data. Additionally, was used the IMU6DoF-SST-CNN to explore three d
APA, Harvard, Vancouver, ISO, and other styles
37

Povkolas, K. E. "Methodology for Calculating Additional Dynamic Settlements of the Bases of Slab Foundations of Buildings and Structures from Vibrations Propagating in the Soil Environment." Science & Technique 23, no. 1 (2024): 46–57. http://dx.doi.org/10.21122/2227-1031-2024-23-1-46-57.

Full text
Abstract:
The paper provides a method for calculating additional settlements of slab foundations of existing buildings and structures from vibration-dynamic influences that arise during various construction works near them (driving piles, vibra- tory driving of sheet piling beams, soil compaction with heavy rammers and vibrating hammers), as well as from industrial equipment and transport. The technique includes the following main steps. Using the finite element method, or measured existing vibration fields, the distribution of the maximum accelerations of ground vibrations under the base of the foundat
APA, Harvard, Vancouver, ISO, and other styles
38

Tryshyn, Pavlo, Olena Kozlova, and Alina Kazurova. "RESEARCH OF NATURAL FREQUENCIES OF THE CUTTER-OSCILLATOR DURING TURNING." New Materials and Technologies in Metallurgy and Mechanical Engineering, no. 2 (June 16, 2025): 75–83. https://doi.org/10.15588/1607-6885-2025-2-9.

Full text
Abstract:
Purpose. To investigate the main methods for determining the natural frequency of the cutter-oscillator X and to analyze the influence of its geometric and inertial parameters on the dynamic characteristics during the study of the physical foundations of cutting process dynamics in turning conditions. Research methods. The experimental study was carried out using the impact hammer test, in which the additional mass and the tool overhang were varied. During each test, oscillation oscillograms were recorded, allowing for the determination of the corresponding natural frequencies. The analytical
APA, Harvard, Vancouver, ISO, and other styles
39

Younis, Adel, Fadi AlKhatib, and Zuomin Dong. "Optimal Motorcycle Engine Mount Design Parameter Identification Using Robust Optimization Algorithms." Algorithms 15, no. 8 (2022): 271. http://dx.doi.org/10.3390/a15080271.

Full text
Abstract:
Mechanical vibrations have a significant impact on ride comfort; the driver is constantly distracted as a result. Volumetric engine inertial unbalances and road profile irregularities create mechanical vibrations. The purpose of this study is to employ optimization algorithms to identify structural elements that contribute to vibration propagation and to provide optimal solutions for reducing structural vibrations induced by engine unbalance and/or road abnormalities in a motorcycle. The powertrain assembly, swing-arm assembly, and vibration-isolating mounts make up the vibration-isolating sys
APA, Harvard, Vancouver, ISO, and other styles
40

Ivan, Nazarenko, and Slipetskyi Volodymyr. "DEVELOPMENT OF THE ORGANIZATIONAL PRINCIPLES OF FORMATION OF THE OPTIMAL DIAGRAM AND PARAMETERS OF VIBRATION SYSTEM." Technology audit and production reserves 5, no. 1 (49) (2019): 29–31. https://doi.org/10.15587/2312-8372.2019.183874.

Full text
Abstract:
<em>The general issues of the development of an optimal circuit diagram of a vibration system and determination of the parameters of this circuit providing an extreme criterion of optimality are considered. The object of research is technical machines and technological media, which are considered as a system subordinated to a single vibration process. By technical machines, vibration machines adopted in the work for the implementation of compaction processes are adopted. Technological media adopted two-phase dispersed media used for compaction. Concrete mixes and soils are accepted by such med
APA, Harvard, Vancouver, ISO, and other styles
41

Fedoseev, Nikita A., Nikolaj A. Ermoshin, and Sergey V. Alekseev. "Method for determining surface stresses under the roller of a vibrating roller." Modern Transportation Systems and Technologies 11, no. 1 (2025): 115–33. https://doi.org/10.17816/transsyst676902.

Full text
Abstract:
Aim. Identification of the main factors for solving the surface contact problem and subsequent determination of surface stresses under the flat wheel roller in a vibration mode. Materials and Methods. The Hertz–Belyaev theory was selected as a basis for the estimation relations. The works of Kharkhuta, Zakharenko, Nosov, Savelyev and other researchers were also analyzed. The inertial component of the roller mass and a periodic nature of the impact of the external force on the soil are taken into account. Results. The basic principles of calculating surface stresses are identified. The physical
APA, Harvard, Vancouver, ISO, and other styles
42

Warminski, J., and K. Kecik. "Autoparametric vibrations of a nonlinear system with pendulum." Mathematical Problems in Engineering 2006 (2006): 1–19. http://dx.doi.org/10.1155/mpe/2006/80705.

Full text
Abstract:
Vibrations of a nonlinear oscillator with an attached pendulum, excited by movement of its point of suspension, have been analysed in the paper. The derived differential equations of motion show that the system is strongly nonlinear and the motions of both subsystems, the pendulum and the oscillator, are strongly coupled by inertial terms, leading to the so-called autoparametric vibrations. It has been found that the motion of the oscillator, forced by an external harmonic force, has been dynamically eliminated by the pendulum oscillations. Influence of a nonlinear spring on the vibration abso
APA, Harvard, Vancouver, ISO, and other styles
43

Hendy, Hossam, Xiao Ting Rui, Qin Bo Zhou, Fu Feng Yang, and Mostafa Khalil. "Transfer Matrix Method for Multibody Systems of TITO System Control Applications." Applied Mechanics and Materials 530-531 (February 2014): 1043–48. http://dx.doi.org/10.4028/www.scientific.net/amm.530-531.1043.

Full text
Abstract:
Many real systems such as inertial measurement unit (IMU) in vibration environment, avionic systems in flight tests, half car dynamic model in rid comfortable test and suspension design…etc. can be expressed as Two-inputs-two-outputs (TITO) system for more realistic analysis than single-input-single-output system (SISO); but with more additional complexities. Comparing Transfer Matrix Method for multibody systems (MSTMM) with classical dynamic methods has preferences of modeling flexibility, low order of system matrix, and high computational efficiency, without necessity of deriving the system
APA, Harvard, Vancouver, ISO, and other styles
44

Hassan, Jamal N. A., Wenyi Huang, Xing Yan, et al. "Design and Analysis of Optomechanical Micro-Gyroscope for Angular-Vibration Detection." Photonics 11, no. 2 (2024): 186. http://dx.doi.org/10.3390/photonics11020186.

Full text
Abstract:
Micro-gyroscopes based on the Coriolis principle are widely employed in inertial navigation, motion control, and vibration analysis applications. Conventional micro-gyroscopes often exhibit limitations, including elevated noise levels and suboptimal performance metrics. Conversely, the advent of cavity optomechanical system technology heralds an innovative approach to micro-gyroscope development. This method enhances the device’s capabilities, offering elevated sensitivity, augmented precision, and superior resolution. This paper presents our main contributions which include a novel dual-frame
APA, Harvard, Vancouver, ISO, and other styles
45

Zabolotnyi, K., and A. Shkut. "Development and testing of a stand for studying the dynamics of an inertial screen with two motor-vibrators." Collection of Research Papers of the National Mining University 77 (June 2024): 218–29. http://dx.doi.org/10.33271/crpnmu/77.218.

Full text
Abstract:
Purpose. To substantiate the design of a stand for studying the dynamics of transient modes of an inertial screen with two motor-vibrators and to develop a methodology for conducting a physical experiment to study the dynamics of the screen. The methods. To conduct a physical experiment, a laboratory stand was developed to study the dynamics of screens. The bench consists of an inertial screen with a piezoelectric acceleration sensor KD 35-2, a system of laboratory devices for acoustic and vibration measuring equipment Robotron, and a computer with installed software. The obtained data are ana
APA, Harvard, Vancouver, ISO, and other styles
46

Shilin, A. N., S. V. Makartichyan, and M. N. Mustafa. "MATHEMATICAL MODEL OF ELECTRO-MECHANICAL VIBRATION TRANSDUCERS BASED ON THE LEVITATION EFFECT." Kontrol'. Diagnostika, no. 295 (January 2023): 22–29. http://dx.doi.org/10.14489/td.2023.01.pp.022-029.

Full text
Abstract:
At present, one of the urgent problems in the energy and industry is to improve the reliability of the operation of various equipment. An effective method for increasing the reliability of equipment is diagnosing the state of machines and predicting their performance. Vibration control methods are widely used to diagnose rotary rotating machines. By the nature of the vibration process of the machine, it is possible to determine the degree of wear and, accordingly, the technical condition of the machines. In measuring technology for diagnostics of low-speed equipment with rotation frequencies o
APA, Harvard, Vancouver, ISO, and other styles
47

Fan, Shang-Chun, Yang Lu, Peng-Cheng Zhao, Fu-Tao Shi, Zhan-She Guo, and Wei-Wei Xing. "Research Progress of Graphene Nano-Electromechanical Resonant Sensors—A Review." Micromachines 13, no. 2 (2022): 241. http://dx.doi.org/10.3390/mi13020241.

Full text
Abstract:
Graphene nano-electromechanical resonant sensors have wide application in areas such as seawater desalination, new energy, biotechnology, and aerospace due to their small size, light weight, and high sensitivity and resolution. This review first introduces the physical and chemical properties of graphene and the research progress of four preparation processes of graphene. Next, the principle prototype of graphene resonators is analyzed, and three main methods for analyzing the vibration characteristics of a graphene resonant sheet are described: molecular structural mechanics, non-local elasti
APA, Harvard, Vancouver, ISO, and other styles
48

Zhang, Tongtian, Junhui Wu, and Guangya Zhou. "A Micromechanical Wide-Range Stiffness-Tuning Mechanism for MEMS Optical Switches." Micromachines 16, no. 4 (2025): 397. https://doi.org/10.3390/mi16040397.

Full text
Abstract:
MEMS stiffness-tunable devices, owing to their low resonant frequency and high sensitivity, have been widely adopted in fields such as biological force sensing, vibration sensing, and inertial sensing. However, traditional stress-effect-based stiffness-adjustment methods offer limited tuning range. This paper introduces a novel stiffness-tuning mechanism based on the principle of stiffness compensation, integrating positive stiffness springs with V-shaped negative stiffness springs in a parallel configuration. A self-locking mechanism enables precise control of the mechanical preloading on the
APA, Harvard, Vancouver, ISO, and other styles
49

Omelyanov, Oleg, and Mykhailo Zamriі. "DIRECTIONS OF IMPROVING THE EFFICIENCY OF VIBRATION TECHNOLOGICAL MACHINES." Vibrations in engineering and technology, no. 4(99) (December 18, 2020): 49–58. http://dx.doi.org/10.37128/2306-8744-2020-4-6.

Full text
Abstract:
The article considers the directions of increasing the efficiency of vibrating technological machines. The processing of information on the development of vibration technologies is quite diverse and is represented by numerous scientific and technical developments related to improving the efficiency of vibration machines and ensuring the reliability of their work. The analytical basis for previous research in the creation of new technology are mathematical models that reflect the properties of mechanical oscillatory systems with several degrees of freedom, which perform small oscillations under
APA, Harvard, Vancouver, ISO, and other styles
50

Homozkova, Irina. "Three-frequency models for determining the orientation of a solid body taking into account the vibration environment." Bulletin of the National Technical University «KhPI» Series: Dynamics and Strength of Machines, no. 2 (December 31, 2021): 29–36. http://dx.doi.org/10.20998/2078-9130.2021.2.240771.

Full text
Abstract:
Two new three-frequency reference models of solid motion taking into account the vibrational environment are proposed. They are based on a four-frequency reference model of rotation [1], which implements rotations according to Krylov angles. For the developed models the analytical dependences for quasi-coordinates, projections of the angular velocity vector and components of the quaternion of orientation corresponding to such rotational motion are obtained. The urgency of taking into account the influence of vibration in traffic modeling on the basis of domestic and foreign literature in the f
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!