Academic literature on the topic 'Vodivé polymery'

Vodivé polymery včetně významného zástupce polyanilinu (PANI) patří v současné době k vysoce zkoumaným látkám v řadě oborů. Díky snadné přípravě, netoxicitě a vysoké stabilitě se zkoumá i jeho využití ve formulaci organických povlaků. Cílem této práce je vyhodnocení vlivu polyanilinových solí na korozní vlastnosti ochranných organických povlaků pomocí zrychlených korozních zkoušek a techniky lineární polarizace (LP). Polyanilinové sole byly připraveny oxidační polymerací v kyselém prostředí, kdy jako dopující kyselina byla použita kyselina fosforečná (H3PO4), kyselina sírová (H2SO4) a kyselina chlorovodíková (HCl). Celkem tedy byly připraveny tři typy polyanilinových solí: PANI-H3PO4, PANI-H2SO4 a PANI-HCl, které byly charakterizovány na základě fyzikálně chemických metod a dále byly použity pro formulaci organických povlaků, při hodnotách objemové koncentrace pigmentu (OKP) = 0,1; 0,5; 1; 2; 3; 5; 10; 15; 20 % a kritické objemové koncentrace pigmentu (KOKP). Výsledky zrychlené korozní zkoušky i metody lineární polarizace ukazují, že typ i objemová koncentrace polyanilinových solí má významný vliv na výsledné korozní vlastnosti organického povlaku. Z výsledků je zřejmé, že především nízké hodnoty OKP jednotlivých polyanilinových solí mají pozitivní dopad na výsledné korozní vlastnosti v porovnání s nepigmentovaným organickým povlakem.

This work deals with the issues of using conducting polymers for supercapacitor electrodes and optimizing the technological process for their production. The work focuses on optimizing the amount of polymer used in order to achieve the most capacity. The methodology consists of creating an appropriate experimental electrode and subsequent measuring its associated capacity with BioLogic. This approach leads to creating charts which show the dependencies of capacity on the amount of polymer used.

This thesis deals with organic materials and determining their electrical parameters. In the thesis are discussed methods of deposition of organic layers and their measurement. Described are the aspects, which are characteristic for organic materials. They will briefly mention some new components and commercial systems. Special attention is given to conducting polymers and determining their parameters. In the experimental part were measured VA and impedance characteristics of the conductive polymer PEDOT-PSS. The research was also about material degradation in time and effects of thickness on the electrical parameters.

Thesis presents synthesis and study of thiophene monomers, oligomers and polymers. The new series of thieno[3,4-b]pyrazine copolymers based on 3-dodecylthiophene and pyrazine monomers were prepared by oxidative polymerization with FeCl3. The effective synthetic method for preparation of 3-alkylthiophenes and thiophene oligomers was developed by optimizing of Kumada cross-couplig. The mentioned method could be realized for multikilos scale with possibility of transfer to pilot plant production. The second part of thesis focuses on synthesis and study of new thiophene compounds, which consist of both 2,3-diazo-1,3-butadiene bridge with two terminal chromophores and two thiophene units linked together via -position by pyrazine or hydrazine bridge. Finally, the new type of regular alternating copolymer consists of 2,2´:5´,2´´-terthiophene-5,5´-dicarboxylic acid (TEDA) and polyethyleneoxide (PEO) was prepared. Formation of polymer nano-subunits as separated phases in solid state was confirmed by TEM.

Studium transportu náboje v Ta2O5 oxidových nanovrstvách se zaměřuje především na objasnění vlivu defektů na vodivost těchto vrstev. Soustředíme se na studium oxidových nanovrstev Ta2O5 vytvořených pomocí anodické oxidace. Proces výroby Ta2O5 zahrnuje řadu parametrů, jež ovlivňují koncentraci defektů (oxidových vakancí) v této struktuře. Vrstva oxidu Ta2O5 o tloušťce 20 až 200 nm se často používá jako dielektrikum pro tantalové kondenzátory, které se staly nedílnou součástí elektrotechnického průmyslu. Kondenzátory s Ta2O5 dielektrickou vrstvou lze modelovat jako strukturu MIS (kov – izolant – polovodič). Anodu tvoří tantal s kovovou vodivostí, katodu potom MnO2 či vodivý polymer (CP), které jsou polovodiče. Hodnoty elektronových afinit, respektive výstupních prací, jednotlivých materiálů potom určují výšku potenciálových bariér vytvořených na rozhraních kov-izolant (M – I) a izolant-polovodič (I – S). Dominantní mechanizmy transportu náboje lze určit analýzou I-V charakteristiky zbytkového proudu. Dominantní mechanizmy transportu náboje izolační vrstvou jsou ohmický, Poole-Frenkelův, Shottkyho a tunelování. Uplatnění jednotlivých vodivostních mechanismů je závislé na teplotě a intenzitě elektrického pole v izolantu. Hodnota zbytkového proud je významným indikátorem kvality daného izolantu. Ten závisí na technologii výroby kondenzátoru, významně především na parametrech anodické oxidace a na materiálu katody. I-V charakteristiky zbytkového proudu se měří v normálním a reversním módu, tj. normální mód značí kladné napětí na anodě a reversní mód záporné napětí na anodě. I-V charakteristika je výrazně nesymetrická, a proto tyto kondenzátory musí být vhodně polarizovány. Nesymetrie I-V charakteristiky se snižuje s klesající teplotou, při teplotě pod 50 K a je možno některé kondenzátory používat jako bipolární součástky. Z analýzy I-V charakteristiky lze určit řadu parametrů, jako tloušťku izolační vrstvy a koncentraci defektů v izolační Ta2O5 vrstvě a dále lze odhadnout parametry MIS modelu kondenzátoru - stanovit hodnotu potenciálových bariér na rozhraních M – I a I – S. Měření C-V charakteristik při různých teplotách v rozsahu 10 až 300 K je využíto pro určení výšky potenciálové bariéry na rozhraní I – S, závislosti kapacity na teplotě a dále pro výpočet efektivní plochy elektrod. Z výbrusu vzorků na skenovacím elektronovém mikroskopu byly určeny tloušťky dielektrika Ta2O5 pro jednotlivé vyhodnocované řady kondenzátorů.

l. Aims of the Thesis The goal of the Thesis is ůeprlaaraiior ..f .'a:ious norpho|ogies produced by conductingpoly.rners, riz. polvaniline (P{\Ji. the.-onrol of ce.n,tu.-:rrrl. a.rC the understanding of the chemistrv of aniline oxidatton. In rhese studies. three ditTerenr drrectiors have been developed. The first pan of the Thesrs rs focused on the slnthesrs of p.{NI. The oprrmum conditions for preparation of all forms available: powders, thin films, and colloidal dispersrons with respect to the morphology' ýeld, and conductiúý have been described. A systematic study of PANI protonated with phosphoric acid as well as a comparative study of the preparation of PANI and polypynole (PPy) have been made. The oxidation of aniline with noble-merals compounds, such as silver nitrate, the effect of the medium acidity, concentration of reacunts and the possible effect of daylight have been invesrigated. A new approach for the synthesis of PANI with separated reactants, aniline and an oxidant, is described in the second part of the Thesis. Various studies have been presented here to investigate the mechanisms of such reactions. The concept of coupled PANl-assisted redox reaction by means oftransport ofelectrons and protons through conducting PANI membrane has been demonstrated. A possible electron-ion-coupled...

Polyaniline-silver composites combine the electrical properties of metals and the material properties of polymers. Polyaniline is one of the most studied conducting polymers on account of high electrical conductivity (units S cm-1 ), environmental stability, ease of preparation from common chemicals, good processibility and low cost. Silver is well known because of its highest conductivity among metals (500 000 S cm−1 ), antibacterial properties, and low price compared to other noble metals. Aniline was oxidized with silver nitrate in acidic aqueous medium to polyaniline-silver composite. The presence of different organic acids was studied. The most promising became methanesulfonic acid solution, in which most problems (such as inhomogeneity of samples and limited solubility of silver salts) got solved. The oxidation of aniline with silver nitrate is slow and takes over several months to get a reasonable yield. An addition of a small amount of p-phenylenediamine, even 1 mol. % relative to aniline, shortens the reaction time to several hours or even to tens of minutes. Small amounts of ammonium peroxydisulfate had similar effect. The content of silver in composites is fixed by the stoichiometry of reaction, and composites always contain ≈70 wt.% of silver. By using mixed oxidants, silver nitrate and...

In the first part of this work, silica nanoparticles and alternative or additional filler phases were incorporated into hydrogels based on the temperature-sensitive poly(N- isopropylacrylamide) (PNIPAm). Nano-SiO2-filled porous PNIPAm hydrogels with an enhanced force response (up to 100 g) to temperature stimuli were obtained by increasing several times the pore wall thickness, which was achieved via reducing the solvent (porogen) content during the gels' cryo-synthesis. A similar optimization of the force response was also carried out for analogous gels reinforced by nano-TiO2, in which the reinforcing effect of the filler is weaker. Partial intercalation of amylopectin starch into divinyl-crosslinked bulk as well as porous PNIPAm gels several times improved their extensibility. In case of starch-rich bulk gels, a very fast and extensive one-way deswelling in response to increased temperature was achieved (re-swelling upon cooling is much slower), which is attributed to specific properties of the starch-PNIPAm interface. In doubly-filled bulk PNIPAm/nano-SiO2/starch gels, a very strong synergic reinforcing effect of both fillers is observed, due to specific hydrogen bridging between the three phases. Highly porous cryogels based on PNIPAm/nano- SiO2/starch displayed a highly improved extensibility...

Title: Study of electrical and dielectric properties of conducting polymers Author: Mgr. Martin Varga Department: Department of Macromolecular Physics Supervisor: RNDr. Jan Prokeš, CSc., Department of Macromolecular Physics Abstract: Charge transport in polyaniline (PANI) and polypyrrole (PPy) was studied in respect to various oxidants, dopants, morphology, and other modifica- tions in their synthesis. The mechanism of transport was discussed in the frame- work of combination of several models characteristic for disordered solids due to inherent heterogeneous structure of conducting polymers. Effect of drying on conductivity was studied and the long-time limit was explained with the diffusion- based model for bulk materials. For PPy nanotubes stability in strong alkaline media and aging were studied by AC and DC techniques. While conductivity of naturally aged samples after two years remained in the same order of magni- tude, after exposure to alkaline media or accelerated aging at high temperatures, conductivity decreased several orders of magnitude. Degraded material exhibited strong disorder and the transport model was completely changed. Despite severe treatment electrical properties were still comparable to other as-prepared mate- rials. Finally, an application example as ammonia sensor, the response of...

Our aim in the present work is to provide and evaluate AC and DC characteristics of the polyaniline based materials. Different experiemtal techniques and devices have been used to achieve this goal. An introduction to the theoretical concepts of conductivity is given as well. The core of this thesis is an investigation of temperature and low pressure dependences, as well as the ageing effects for two systems (composites) in respect of the different preparation conditions such as dopants and their molar concentration, origin and the content of inorganic component and the way of polymerisation. An agreement with theoretical models is discussed.