Relevant bibliographies by topics / Voltage source converter

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Voltage source converter'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Voltage source converter.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Voltage source converter"

1

S, Adarsh, and Nagendrappa H. "Duty ratio control ofthree port isolated bidirectional asymmetrical triple active bridge DC-DC converter." International Journal of Power Electronics and Drive Systems (IJPEDS) 12, no. 2 (June 1, 2021): 943. http://dx.doi.org/10.11591/ijpeds.v12.i2.pp943-956.

Full text
Abstract:
Multiport converters are used in interfacing of distributed energy sources with grid/load. Isolated converters are needed in applications where converter gain is high and there is a requirement of isolation. Dual transformer asymmetric triple active bridge offers the advantage of reduced circulating current. However, the operating range is low for variation in load and source voltage. In this paper duty ratio modulation technique is proposed to regulate the load voltage and control the power flow in both the directions. As a result of the new gating scheme, the converter switches operate with ZVS, irrespective of variations in load power and source voltage. The converter is designed to ensure high switch utilization. The control technique is validatedthrough simulation of a 1kW three port DC-DC converter. It was observerd that the load voltage was regulated for wide range of variation in load power and source port voltages. The single input dual output mode was also verified.
APA, Harvard, Vancouver, ISO, and other styles
2

Gregor, Raúl, Sergio Toledo, Edgar Maqueda, and Julio Pacher. "Part I—Advancements in Power Converter Technologies: A Focus on SiC-MOSFET-Based Voltage Source Converters." Energies 16, no. 16 (August 15, 2023): 5994. http://dx.doi.org/10.3390/en16165994.

Full text
Abstract:
Power converter technologies have become vital in various applications due to their efficient management of electrical energy. With the growing prominence of renewable energy sources such as solar and wind, the high penetration of power electronic converters has been justified. However, ensuring power quality has emerged as a significant challenge for grid-connected power converters. The divergence from the ideal sinusoidal waveform in terms of magnitude and frequency impacts both grid-side currents and voltages. Several studies have proposed solutions to address power quality issues at the load side. The advancement of power converters has been fueled by the development of high-performance microprocessors and the emergence of high-speed switching devices, such as SiC-MOSFETs. This paper focuses on the design of voltage source converters, particularly those based on SiC-MOSFET semiconductor devices. The article presents the design of H-Bridge cells, discusses two-level voltage source converters based on cascade H-Bridge cells in a parallel configuration with experimental fault analysis, addresses the seven-level voltage source converter topology, and explores the design and experimental results of the matrix converter. The findings underscore the importance of considering the entire converter design for improved performance at high switching frequencies. The article concludes by summarizing the main outcomes and implications of this research.
APA, Harvard, Vancouver, ISO, and other styles
3

Sivapriyan, R., and D. Elangovan. "Impedance-Source DC-to-AC/DC Converter." Electronics 8, no. 4 (April 16, 2019): 438. http://dx.doi.org/10.3390/electronics8040438.

Full text
Abstract:
This article presents a novel impedance-source-based direct current (DC)-to-alternating current (AC)/DC converter (Z-Source DAD Converter). The Z-Source DAD converter converts the input DC voltage into AC or DC with buck or boost in the load voltage. This Z-Source DAD conversion circuit is a single-stage power conversion system. This converter circuit converts the input DC voltage into variable-magnitude output DC voltage or converts the DC voltage into a variable-magnitude output AC voltage. The higher voltage magnitude in boost mode can be controlled by controlling the shoot-through (ST) state timing of the converter. MATLAB-Simulink simulation and microcontroller-based hardware circuit results are presented to demonstrate power conversion with the buck and boost features of the Z-Source DAD converter for both types of output voltages. The simulation and experimental results show that the Z-Source DAD converter converts the given DC supply into AC or DC with buck or boost in the output load voltage.
APA, Harvard, Vancouver, ISO, and other styles
4

Kim, Sung-Hun, Hyung-Jun Byun, Junsin Yi, and Chung-Yuen Won. "A Bi-Directional Dual-Input Dual-Output Converter for Voltage Balancer in Bipolar DC Microgrid." Energies 15, no. 14 (July 11, 2022): 5043. http://dx.doi.org/10.3390/en15145043.

Full text
Abstract:
Bipolar DC microgrids (BDCMGs) have several issues related to the voltage and require numerous converters to supply power to both poles. To solve these issues, a bidirectional dual-input dual-output (DIDO) converter is proposed for the voltage balancer in BDCMG. The DIDO converter has dual-input sources and a dual-output port connected to the grid. Additionally, the DIDO converter simultaneously performs independent bidirectional power control and voltage balancing control. Based on the input voltages, this paper proposes modulation methods for three cases. The modulation method of the second case has a wide operating range and low balancing current ripple without increasing the switching frequency. Moreover, only voltage balancer mode without active input sources is proposed, considering the intermittent source. Therefore, it can operate as a voltage balancer under all conditions. The voltage balancing performance of the three cases was analyzed. Finally, the proposed modulation and control method of the DIDO converter were verified through experimental results.
APA, Harvard, Vancouver, ISO, and other styles
5

Salehi, Navid, Herminio Martínez-García, and Guillermo Velasco-Quesada. "Modified Cascaded Z-Source High Step-Up Boost Converter." Electronics 9, no. 11 (November 17, 2020): 1932. http://dx.doi.org/10.3390/electronics9111932.

Full text
Abstract:
To improve the voltage gain of step-up converters, the cascaded technique is considered as a possible solution in this paper. By considering the concept of cascading two Z-source networks in a conventional boost converter, the proposed topology takes the advantages of both impedance source and cascaded converters. By applying some modifications, the proposed converter provides high voltage gain while the voltage stress of the switch and diodes is still low. Moreover, the low input current ripple of the converter makes it absolutely appropriate for photovoltaic applications in expanding the lifetime of PV panels. After analyzing the operation principles of the proposed converter, we present the simulation and experimental results of a 100 W prototype to verify the proposed converter performance.
APA, Harvard, Vancouver, ISO, and other styles
6

Sladić, Saša, Srđan Skok, and David Nedeljković. "Efficiency Considerations and Application Limits of Single-Phase Active Power Filter with Converters for Photoenergy Applications." International Journal of Photoenergy 2011 (2011): 1–8. http://dx.doi.org/10.1155/2011/643912.

Full text
Abstract:
A new way of connecting PV sources to adaptive voltage active power filter (AV APF) has been compared with classic approach including active power filter (APF). In standard active power filter applications a relatively high DC link voltage (500 V or even more) with a buck converter or lower voltage (approx. 100 V) with boost converter can be used. These two converters appear also in adaptive voltage circuit of AV APF, but in this case it is possible to achieve many different connections of DC source. Benefit of this approach is that the same circuit is used for improving switching conditions in APF and for connection of solar cells. It appears that these two functions support each other and a large variety of DC voltages and currents can be connected to AC mains. Experimental results confirm expectations of increased energy transfer from additional DC source to network, especially for DC voltages being lower than DC link voltage.
APA, Harvard, Vancouver, ISO, and other styles
7

Rajaei, Amirhossein, Mahdi Shahparasti, Ali Nabinejad, and Mehdi Savaghebi. "A High Step-Up Partial Power Processing DC/DC T-Source Converter for UPS Application." Sustainability 12, no. 24 (December 14, 2020): 10464. http://dx.doi.org/10.3390/su122410464.

Full text
Abstract:
In this paper, a new modified structure of a DC/DC T-source converter is proposed. Since the proposed converter provides high voltage gain, it is suitable for photovoltaic integration into uninterruptible power supply (UPS) systems. The proposed structure employs partial power processing technique to increase the output voltage as well as efficiency without requiring new hardware. Partial power converters (PPCs) process only a fraction of flowing power while the remaining power directly flows through output. This generally causes an improvement in efficiency and output voltage. A total of two structures are presented: conventional partial power T-source converters and improved partial power T-source converters. The key advantage of the improved partial power converter is a higher voltage gain. Furthermore, it reduces the voltage and the current stresses on switches and diodes. The steady-state operation principles are described for both converters and the governed rules and equations are derived. The PPCs and full power converter are compared in terms of efficiency, voltage gain, voltage stress, and current stress of converter elements. The converter performance is evaluated through experimental and simulation studies. The presented results show good consistency with the theoretical analysis.
APA, Harvard, Vancouver, ISO, and other styles
8

Soldado-Guamán, Joaquin, Victor Herrera-Perez, Mayra Pacheco-Cunduri, Alejandro Paredes-Camacho, Miguel Delgado-Prieto, and Jorge Hernandez-Ambato. "Multiple Input-Single Output DC-DC Converters Assessment for Low Power Renewable Sources Integration." Energies 16, no. 4 (February 7, 2023): 1652. http://dx.doi.org/10.3390/en16041652.

Full text
Abstract:
This paper presents a comparison of Isolated (Flyback) and non-Isolated (Buck) multiple input-single output (MISO) DC-DC converters. The analysis of DC-DC converters is based on pulsed voltage source cells (PVSC). The modeling of both converter types is detailed through their mathematical models and electrical simulations using Matlab/Simulink and PSIM. The comparison focuses on the sizing parameters, non-ideal output characteristics and efficiency. Results show that the output voltage of the MISO Buck converter exhibits a linear dependence on the duty cycles control signal and has slightly higher efficiency than the Flyback converter. To validate the operation of both converters, a scenario with two inputs (low-power hydroelectric and photovoltaic voltage sources) is considered. The modeling and control of both source systems are detailed and the MISO converter performance response is evaluated under sources changes and efficiency point of view.
APA, Harvard, Vancouver, ISO, and other styles
9

Jagadeesh, Ingilala, and Vairavasundaram Indragandhi. "Comparative Study of DC-DC Converters for Solar PV with Microgrid Applications." Energies 15, no. 20 (October 13, 2022): 7569. http://dx.doi.org/10.3390/en15207569.

Full text
Abstract:
This review emphasizes the role and performance of versatile DC-DC converters in AC/DC and Hybrid microgrid applications, especially when solar (photo voltaic) PV is the major source. Here, the various converter topologies are compared with regard to voltage gain, component count, voltage stress, and soft switching. This study suggests the suitability of the converter based on the source type. The merits of a coupled inductor and interleaved converters in micro gird applications are elucidated. The efficiency and operating frequencies of converts for different operating modes are presented to determine the suitable converters for inductive and resistive loads. The drawbacks of converters are discussed. Finally, the mode of operation of different converts with different grid power sources and its stability and reliability issues are highlighted. In addition, the significance of the converter’s size and cost-effectiveness when choosing various PV source applications are discussed.
APA, Harvard, Vancouver, ISO, and other styles
10

Sarala, P., S. F. Kodad, and B. Sarvesh. "Power Factor Correction with Current Controlled Buck Converter for BLDC Motor Drive." International Journal of Power Electronics and Drive Systems (IJPEDS) 8, no. 2 (June 1, 2017): 730. http://dx.doi.org/10.11591/ijpeds.v8.i2.pp730-738.

Full text
Abstract:
Brushless DC motor is a synchronous machine that makes use of electronic commutation instead of mechanical commutator. Brushless DC motors makes use of inverter encompassing static switches for its operation. A simple bridge converter when used for BLDC drive as front end converter makes input source power factor to get reduced which is unacceptable in the power system. To avoid the distortions in the source voltage and source currents, Buck converter which was used as power factor correction (PFC) converter in this paper to improve the power factor. Presence of power electronic converters deteriorates system power factor effecting overall system performance. This paper presents buck converter for power factor correction in brushless DC motor drive system. Buck converter is operated with current control strategy rather to conventional voltage follower control. Simulation model was obtained using MATLAB/SIMULINK software and the brushless DC motor performance characteristics were shown for conditions with different DC link voltages and step variation in DC link voltage. Total harmonic distortion in source current was also presented.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Voltage source converter"

1

Borisov, Konstantin A. "Multifunctional voltage source converter for shipboard power systems." Diss., Mississippi State : Mississippi State University, 2007. http://library.msstate.edu/etd/show.asp?etd=etd-06042007-142951.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kazerani, Mehrdad. "Dyadic matrix converter theory : development, and application to voltage-source-converter type matrix converter." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28794.

Full text
Abstract:
For the past twenty years, the theoretical advance of the matrix converters has been impeded by the complexity arising from the time-varying trigonometric functions in their transformation matrix. In addition, the switching difficulties associated with the bidirectional switches have complicated the practical implementation of this class of converters.
In this thesis, the dyadic matrix structure and the a-b-c to d-q-0 transformation have been melded together to develop the dyadic matrix converter theory which is a generalized theory for the three-phase to three-phase matrix converters.
The thesis addresses the zero-sequence interaction in the matrix converters and the role of the zero-sequence elements in the Displacement Power Factor (DPF) correction on the utility-side, based on the Static VAR Controller (SVC) principle. Also, it is proved that using all the control degrees of freedom available, the dual condition of Unity Displacement Power Factor (UDPF) on side-1 and Field Vector Control (FVC) on side-2 can be established.
In this thesis, a new matrix converter topology, based on the three-phase voltage-source converters, has been proposed in which the switching difficulties reported in the conventional nine-bidirectional-switch topology have been bypassed. The theoretical expectations have been verified by the simulation as well as experimental tests on a laboratory prototype of the new matrix converter topology composed of three units of voltage-source converters each rated at 1 kVA.
APA, Harvard, Vancouver, ISO, and other styles
3

Lu, Bin. "A feedback control algorithm for voltage-source matrix converter." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ37268.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lu, Bin 1969. "A feedback control algorithm for voltage-source matrix converter /." Thesis, McGill University, 1997. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28001.

Full text
Abstract:
One application of the voltage-source, matrix converter is as an asynchronous link, joining two AC power systems with different frequencies (50Hz/60Hz), or at the same frequency (60Hz/60Hz) but at different phase angles. This thesis work shows that for this kind of link, there exists an automatic closed-loop feedback strategy to control the real and reactive powers quickly and independently.
In this thesis, the new matrix converter topology, based on the three-phase voltage-source converters, has been used.
The thesis mixes the dyadic matrix structure the a-b-c to d-q-o transformation and feedback control theory together to get the results.
Digital simulations are presented.
APA, Harvard, Vancouver, ISO, and other styles
5

Martin, Fregelius. "Power electronics and controller interface for a Voltage Source Converter." Thesis, Uppsala universitet, Elektricitetslära, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-322903.

Full text
Abstract:
The purpose of the thesis is to develop a system for a split-rotor drive and evaluatecontrollers and their internal components such as processors, communicationprotocols and execution speed for controlling magnetization currents in a hydropower station.The first part of the thesis builds the theory review and provides an introduction tothe most common processors and controllers available. The processors which wasevaluated were microprocessor, DSP and FPGA which have a high capacity andvariety of implementation possibilities. Two controllers, PLC and PAC whereevaluated, which contain some or several of the processors and have a wide variety ofinputs and outputs and support as well several communication protocols.Three different communication protocols; WLAN 802.11, Ethernet 802.3 andBluetooth 802.15.1. Evaluation was made by comparing BER, throughput, speed and implementationcomplexity. The second part of the thesis was to develop and order an interface card forconnecting power-electronics and measurements circuits for the system, based on thetheory and evaluation of the controller and communication protocols.
APA, Harvard, Vancouver, ISO, and other styles
6

Ormrod, James Ernest. "Harmonic state space modelling of voltage source converters." Thesis, University of Canterbury. Electrical and Computer Engineering, 2013. http://hdl.handle.net/10092/8081.

Full text
Abstract:
The thesis describes the development of a model of the three-phase Voltage Source Converter (VSC) in the Harmonic State Space (HSS) domain, a Linear Time Periodic (LTP) extension to the Linear Time Invariant (LTI) state space. The HSS model of the VSC directly captures harmonic coupling effects using harmonic domain modelling concepts, generalised to dynami- cally varying signals. Constructing the model using a reduced-order three-phase harmonic signal representation achieves conceptual simplification, reduced computational load, and direct inte- gration with a synchronous frame vector control scheme. The numerical switching model of the VSC is linearised to gain a small-signal controlled model, which is validated against time-domain PSCAD/EMTDC simulations. The controlled model is evaluated as a STATCOM-type system, exercising closed-loop control over the reactive power flow and dc-side capacitor voltage using a simple linear control scheme. The resulting state- space model is analysed using conventional LTI techniques, giving pole-zero and root-locus analyses which predict the dynamic behaviour of the converter system. Through the ability to independently vary the highest simulated harmonic order, the dependence on the closed-loop response to dynamic harmonic coupling is demonstrated, distinguishing the HSS model from fundamental-only Dynamic Phasor models by its ability to accurately model these dynamics.
APA, Harvard, Vancouver, ISO, and other styles
7

You, Keping Electrical Engineering &amp Telecommunications Faculty of Engineering UNSW. "A new bidirectional AC-DC converter using matrix converter and Z-source converter topologies." Awarded by:University of New South Wales, 2007. http://handle.unsw.edu.au/1959.4/37450.

Full text
Abstract:
This thesis proposes a new bidirectional three-phase AC-DC power converter using matrix converter and Z-source inverter topologies. Advantages of the AC-DC matrix converter are the inherently controllable power factor, the tight DC voltage regulation, the wide bandwidth with quick response to load variation, the single-stage buck-voltage AC-to-DC power conversion; advantages of the z-source inverter are the increased reliability by allowing the shoot-through between upper and lower power switches of one inverter leg, insensitivity to DC bus voltage due to the extra freedom of controlling DC-link voltage. The proposed Matrix-Z-source converter (MZC) marries up both advantages of AC-DC matrix converter and Z-source inverter. It can achieve voltage-boost DC-AC inversion capable of variable voltage variable frequency (VVVF) AC output; it can achieve voltage-buck AC-DC rectification capable of inherent control over AC current phase angle and DC output regulation with a (VVVF) AC source supply. Both foresaid performance in DC-AC inversion and AC-DC rectification can be implemented in a simple open-loop control manner. Three constraints of VSI, in the bidirectional AC-DC power conversion, are the peak AC voltages are always less than DC-link voltage, closed-loop control has to be employed when DC regulation and/or AC current phase angle control are required, and AC voltage is sensitive to the variation of the DC-link voltage in DC-AC inversion. The voltage-boost inversion and/or voltage-buck rectification of MZC overcomes the first constraint; thus MZC enables the AC machine voltage increased higher than DC-link voltage hence advantages of running AC machine at relatively high voltages are enabled. The direct DC voltage regulation and inherent AC-current-phase-angle control of MZC overcomes the second constraint in an open-loop manner; hence a simplified system design is obtained with sufficient room for the further improvement by closed-loop control schemes. The extra freedom in controlling DC-link voltage of MZC overcomes the third constraint hence a DC source voltage adaptable inverter is obtained. This thesis focuses on the study of the feasibility of the proposed MZC through theoretical analysis and experimental verification. At first, the proposed MZC is conceptually constructed by examining the quadrant operation of AC-DC matrix converter and Z-source inverter. After the examination of the operating principles of both AC-DC matrix converter and Z-source inverter, the configuration of MZC is then proposed. The MZC has two operating modes: DC-AC inversion and AC-DC rectification. Circuit analysis for both operating modes shows that the new topology does not impose critical conflict in circuit design or extra restriction in parameterization. On the contrary, one version of the proposed MZC can make full advantage of Z-source network components in both operating modes, i.e. a pair of Z-source inductor and capacitor can be used as low-pass filter in AC-DC rectification. The modulation strategy, average modeling of system, and features of critical variables for circuit design of the proposed MZC were examined for each operating mode. Simulations of the proposed MZC and its experimental verification have been presented. Analytical models of conduction and switching losses of the power-switch network in different operating mode have shown that the losses in the MZC compare favorably with conventional VSI for a range of power factor and modulation indices.
APA, Harvard, Vancouver, ISO, and other styles
8

Xie, Hailian. "Voltage Source Converters with Energy Storage Capability." Licentiate thesis, Stockholm : Division of electrical machines and power electronics, Royal Institute of Technology, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lamont, Lisa Ann. "Modelling and control of a VSC (voltage source converter) tranmission system." Thesis, University of Ulster, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.414074.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Xiaodong. "Advanced control of voltage source converter based multi-terminal HVDC systems." Thesis, Queen's University Belfast, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.676499.

Full text
Abstract:
This thesis focuses on the advanced control methods for multi-terminal High Voltage Direct Current (HVDC) systems integrating offshore wind farms. Several key issues are investigated in this thesis, including controller design to improve the system dynamic performance, power loss reduction with controller optimization, system stability and dynamics assessment. A DC voltage backstepping control method is designed considering the cable dynamics and controller delay effects. DC cable and converter current loop dynamics are included in the voltage controller design. This control method is applied to a point-to-point and a 4-terminal HVDC system with a conjunction point. Simulation results show that the controller performance can be improved in terms of the disturbance rejection., The relation between Voltage Source Converter (VSC) control action and power losses in the multi-terminal HVDC systems is investigated. For a 4-terminal system, it is shown that the transmission loss can be reduced by properly setting the droop gain ratio between different terminals. For each converter, it is demonstrated by simulation that through a proper controller design, the power loss can be significantly reduced while controller performance can be maintained. A new droop setting design method is proposed. It is shown that due to the existence of droop control, DC voltage deviation will affect the power flow accuracy when the steady state is changed. The impact of DC voltage deviation on the power flow accuracy is studied to tackle this problem, and the DC voltage deviation can be kept unchanged, without affecting the steady state power flow. A droop gain selection procedure is proposed to satisfy the system stability requirement. A state feedback enhanced droop controller is proposed to improve the dynamic performance and stability requirement. With the proposed method, it is shown that the system stability can be guaranteed under both small and large droop gains.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Voltage source converter"

1

Lian, Ryan Kuo-Lung. Real time digital simulation of a voltage source converter. Ottawa: National Library of Canada, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sun, Sheng. Modelling and control of a series dual bridge GTO voltage source converter. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gruba, Mariusz. The closed-loop control of a series dual bridge GTO voltage source converter. Ottawa: National Library of Canada, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Raczkowycz, Julian. Monolithic data converters and integrated voltage reference sources. Huddersfield: The Polytechnic, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ibrahim, Nagwa F., and Sobhy S. Dessouky. Design and Implementation of Voltage Source Converters in HVDC Systems. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-51661-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yazdani, Amirnaser. Voltage-sourced converters in power systems: Modeling, control, and applications. Hoboken, N.J: IEEE Press/John Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yazdani, Amirnaser. Voltage-sourced converters in power systems: Modeling, control, and applications. Hoboken, N.J: IEEE Press/John Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

1955-, Iravani Reza, ed. Voltage-sourced converters in power systems: Modeling, control, and applications. Hoboken, N.J: Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Stergiopoulos, Fotis. Analysis and control design of the three-phase voltage-sourced AC/DC PWM converter. Birmingham: University of Birmingham, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wu, Eric. Digital current control of a voltage source converter with active damping of LCL resonance. 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Voltage source converter"

1

Abo-Khalil, Ahmed G., and Ali M. Eltamaly. "Voltage Source Converter Control Under Unbalanced Grid Voltage." In Control and Operation of Grid-Connected Wind Energy Systems, 57–72. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-64336-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Khobragade, Meghana, Harshit S. Dalvi, and Prashant Jagtap. "Bidirectional Voltage Source Converter for Microgrid." In Smart Technologies for Energy, Environment and Sustainable Development, 29–40. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6148-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Singh, Bhim, Sabha Raj Arya, Chinmay Jain, Sagar Goel, Ambrish Chandra, and Kamal Al-Haddad. "Application of Voltage Source Converter for Power Quality Improvement." In Lecture Notes in Electrical Engineering, 335–46. New Delhi: Springer India, 2015. http://dx.doi.org/10.1007/978-81-322-2141-8_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Babouche, Randa, Nourelddine Henini, Kamel Saoudi, and Taki Eddine Ameur. "Sliding Mode Control of Voltage Source Converter Based High Voltage Direct Current System." In Advances in Green Energies and Materials Technology, 209–14. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0378-5_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bian, Chunyuan, Xiaojun Duan, Xuehai Chen, and Chonghui Song. "Dual-PWM Three-Level Voltage Source Converter Based on SVPWM." In Lecture Notes in Electrical Engineering, 583–92. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-4981-2_64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sharma, Shailendra Kumar, and Pemendra Kumar Pardhi. "Control for Grid Synchronization of Single-Phase Voltage Source Converter." In Studies in Infrastructure and Control, 239–79. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7956-9_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ravi Sankar, R. S., and S. V. Jaya Ram Kumar. "Fuzzy Current Control of Grid Interactive Voltage Source Converter with Solar Energy." In Smart Computing and Informatics, 193–202. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-5544-7_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pathak, Geeta, Bhim Singh, and B. K. Panigrahi. "Fixed-Speed Wind and Solar Power System with Multifunctional Voltage Source Converter." In Distributed Energy Systems, 143–54. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003229124-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Haider, Aamir, Rubi Kumari, Moumi Pandit, and K. S. Sherpa. "Modified Boost Converter for Increased Voltage Gain Applicable for Multiple Renewable Source." In Learning and Analytics in Intelligent Systems, 960–67. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-42363-6_110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mishra, S., and P. C. Sekhar. "Real and Reactive Power Control of Voltage Source Converter-Based Photovoltaic Generating Systems." In Solar Cell Nanotechnology, 475–503. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118845721.ch17.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Voltage source converter"

1

Stout, Thomas, and Alexander Dean. "Voltage source based voltage-to-time converter." In 2015 IEEE 58th International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE, 2015. http://dx.doi.org/10.1109/mwscas.2015.7282107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yushu Zhang, G. P. Adam, T. C. Lim, S. J. Finney, and B. W. Williams. "Voltage source converter in high voltage applications: multilevel versus two-level converters." In 9th IET International Conference on AC and DC Power Transmission (ACDC 2010). IET, 2010. http://dx.doi.org/10.1049/cp.2010.0995.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Elserougi, Ahmed Abbas, Shehab Ahmed, and Ahmed Massoud. "GridConnected CapacitorTapped MultiModule Voltage Source Converter." In Qatar Foundation Annual Research Conference Proceedings. Hamad bin Khalifa University Press (HBKU Press), 2018. http://dx.doi.org/10.5339/qfarc.2018.eepd57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nicolae, D. V., A. A. Jimoh, and J. F. J. van Rensburg. "DC current source to voltage source CT-based converter." In 2007 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) and Electromotion '07. IEEE, 2007. http://dx.doi.org/10.1109/acemp.2007.4510587.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rasool, Akhtar, Fiaz Ahmad, and Asif Sabanovic. "Voltage source converter control under unbalanced grid voltage conditions." In 2017 XXVI International Conference on Information, Communication and Automation Technologies (ICAT). IEEE, 2017. http://dx.doi.org/10.1109/icat.2017.8171643.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Milasi, Rasoul, Alan F. Lynch, and Yunwei Li. "Adaptive control of a Voltage Source Converter." In 2010 IEEE 23rd Canadian Conference on Electrical and Computer Engineering - CCECE. IEEE, 2010. http://dx.doi.org/10.1109/ccece.2010.5575111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Radomski, Grzegorz. "Modelling and modulation of voltage source converter." In 2008 13th International Power Electronics and Motion Control Conference (EPE/PEMC 2008). IEEE, 2008. http://dx.doi.org/10.1109/epepemc.2008.4635316.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mora, Carlos A. Hidalgo, and Nelson L. Diaz Aldana. "Vectorial control of a Voltage Source Converter." In Exposition: Latin America. IEEE, 2010. http://dx.doi.org/10.1109/tdc-la.2010.5762958.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yuan, Xibo. "Derivation of multilevel voltage source converter topologies." In IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2016. http://dx.doi.org/10.1109/iecon.2016.7794020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mesbah, Koussaila, Tahar Otmane Cherif, Adel Rahoui, and Hamid Seddiki. "Voltage source converter parameters design considering equivalent source resistance effect." In 2017 5th International Conference on Electrical Engineering - Boumerdes (ICEE-B). IEEE, 2017. http://dx.doi.org/10.1109/icee-b.2017.8192165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Voltage source converter' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography