Relevant bibliographies by topics / Vortex Tube Jet Assisted machining

Contents

  1. Journal articles
  2. Conference papers

Academic literature on the topic 'Vortex Tube Jet Assisted machining'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Vortex Tube Jet Assisted machining.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Vortex Tube Jet Assisted machining"

1

Balaji., Nelge, and Kale Vinayak. "Optimization of Input Cutting Parameters on Cutting Force During Vortex Tube Jet Assisted Machining of Ti-6Al-4V." International Journal of Engineering and Advanced Technology (IJEAT) 9, no. 4 (2020): 9–13. https://doi.org/10.35940/ijeat.C6240.049420.

Full text
Abstract:
Titanium alloy materials machining is difficult, expensive and leads to wear and tear of the tool. The improvement in the tool life and use of optimal process parameters during machining is necessary to obtain better work piece surface finish. Here main aims to evaluate the effect of input process parameters on cutting force in Vortex Tube Jet Assisted CNC Machining of Titanium Alloy material. Taguchi L27 orthogonal array design matrix were used for experimentations by employing a Vortex Tube Jet Assisted cooling system. The significantly affecting process parameters are identified through ANO
APA, Harvard, Vancouver, ISO, and other styles
2

Nilesh, Balki* Balaji Nelge Dr. Asha Ingle. "EXPERIMENTAL INVESTIGATION OF ENVIRONMENT FRIENDLY COOLING METHODS FOR DIFFERENT MACHINING CONDITIONS." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 11 (2017): 186–91. https://doi.org/10.5281/zenodo.1042116.

Full text
Abstract:
This study deals with the experimental investigation of temperature and heat generation during machining process and cooling methods. Elevated temperatures generated in machining operations significantly influence the process efficiency and the surface quality of the machine part. Heat transfer between the chip, the tool, and the environment during the metal machining process has an impact on temperatures, wear mechanisms and hence on tool-life and on the accuracy of the machined component. This study deals with experimental study of different cooling methods for different machining conditions
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Tao, Yikai Xiao, Yusen Hang, Xiujuan Wu, and Weijing Kong. "Research on Helical Electrode Electrochemical Drilling Assisted by Anode Vibration for Jet Micro-Hole Arrays on Tube Walls." Micromachines 16, no. 1 (2025): 86. https://doi.org/10.3390/mi16010086.

Full text
Abstract:
The electrochemical cutting technique, utilizing electrolyte flushing through micro-hole arrays in the radial direction of a tube electrode, offers the potential for cost-effective and high-surface-integrity machining of large-thickness, straight-surface structures of difficult-to-cut materials. However, fabricating the array of jet micro-holes on the tube electrode sidewall remains a significant challenge, limiting the broader application of this technology. To enhance the efficiency and quality of machining these jet micro-holes on the tube sidewall, a helical electrode electrochemical drill
APA, Harvard, Vancouver, ISO, and other styles
4

Roldán-Jiménez, Luis, Severo Raúl Fernández-Vidal, Francisco Javier Puerta-Morales, Ana Pilar Valerga-Puerta, and Fermín Bañón-García. "Design and Evaluation of an Eco-Efficient RHVT-Cooled Ti6Al4V Drilling Process." Key Engineering Materials 955 (September 27, 2023): 63–71. http://dx.doi.org/10.4028/p-9ludkl.

Full text
Abstract:
The continuous demand focused on optimizing titanium machining techniques in the aerospace industry, makes improving machining processes in this area of great interest to the industry. The contamination produced by the coolants used to machine titanium is a major problem to be addressed, since it is a material that requires cooling due to its strength, physical qualities and low thermal conductivity. That is why the implementation of a RHVT cooling system can improve the current situation. The aim of this work is to compare the final quality of the drilling by applying the system of RHTV (Ranq
APA, Harvard, Vancouver, ISO, and other styles
5

Dong, Pham Quang, Tran Minh Duc, Ngo Minh Tuan, Tran The Long, Dang Van Thanh, and Nguyen Van Truong. "Improvement in the Hard Milling of AISI D2 Steel under the MQCL Condition Using Emulsion-Dispersed MoS2 Nanosheets." Lubricants 8, no. 6 (2020): 62. http://dx.doi.org/10.3390/lubricants8060062.

Full text
Abstract:
The present work shows the process for MoS2 nanosheet production by liquid N2-queched bulk, a novel method having highly efficient, green, and facile operation. The produced MoS2 nanoparticles are suspended in minimum quantity cooling lubrication (MQCL)-based fluid to form nanofluid used for the hard milling of AISI D2 steel. The study aims to improve the hard-milling performance assisted by the MQCL technique using MoS2 nanofluid. ANOVA analysis is used to evaluate the effects of three input machining variables, including nanoparticle concentration, cutting speed, and material hardness on cut
APA, Harvard, Vancouver, ISO, and other styles
6

Singh, Gurraj, Catalin Iulian Pruncu, Munish Kumar Gupta, et al. "Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms." Materials 12, no. 6 (2019): 999. http://dx.doi.org/10.3390/ma12060999.

Full text
Abstract:
Environmental protection is the major concern of any form of manufacturing industry today. As focus has shifted towards sustainable cooling strategies, minimum quantity lubrication (MQL) has proven its usefulness. The current survey intends to make the MQL strategy more effective while improving its performance. A Ranque–Hilsch vortex tube (RHVT) was implemented into the MQL process in order to enhance the performance of the manufacturing process. The RHVT is a device that allows for separating the hot and cold air within the compressed air flows that come tangentially into the vortex chamber
APA, Harvard, Vancouver, ISO, and other styles
7

Singh, GurRaj, and Vishal S. Sharma. "Analyzing machining parameters for commercially puretitanium (Grade 2), cooled using minimum quantity lubrication assisted by a Ranque-Hilsch vortex tube." International Journal of Advanced Manufacturing Technology 88, no. 9-12 (2016): 2921–28. http://dx.doi.org/10.1007/s00170-016-8982-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Optimization of Input Cutting Parameters on Cutting Force During Vortex Tube Jet Assisted Machining of Ti-6Al-4V." International Journal of Innovative Technology and Exploring Engineering 9, no. 4 (2020): 9–13. http://dx.doi.org/10.35940/ijeat.c6240.049420.

Full text
Abstract:
Titanium alloy materials machining is difficult, expensive and leads to wear and tear of the tool. The improvement in the tool life and use of optimal process parameters during machining is necessary to obtain better work piece surface finish. Here main aims to evaluate the effect of input process parameters on cutting force in Vortex Tube Jet Assisted CNC Machining of Titanium Alloy material. Taguchi L27 orthogonal array design matrix were used for experimentations by employing a Vortex Tube Jet Assisted cooling system. The significantly affecting process parameters are identified through ANO
APA, Harvard, Vancouver, ISO, and other styles
9

"Optimization of Input Cutting Parameters on Cutting Force During Vortex Tube Jet Assisted Machining of Ti-6Al-4V." International Journal of Engineering and Advanced Technology 9, no. 4 (2020): 9–13. http://dx.doi.org/10.35940/ijeat.c6240.409420.

Full text
Abstract:
Titanium alloy materials machining is difficult, expensive and leads to wear and tear of the tool. The improvement in the tool life and use of optimal process parameters during machining is necessary to obtain better work piece surface finish. Here main aims to evaluate the effect of input process parameters on cutting force in Vortex Tube Jet Assisted CNC Machining of Titanium Alloy material. Taguchi L27 orthogonal array design matrix were used for experimentations by employing a Vortex Tube Jet Assisted cooling system. The significantly affecting process parameters are identified through ANO
APA, Harvard, Vancouver, ISO, and other styles
10

Gamidi, Kartheek, and Vamsi Krishna Pasam. "Performance evaluation of spot cooled vibration assisted turning for Ti6Al4V alloy." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, January 12, 2023, 095440542211477. http://dx.doi.org/10.1177/09544054221147708.

Full text
Abstract:
In the present work, a hybrid modular machining technology was designed for machining of Ti6Al4V alloy. Ultrasonic machining was integrated with vortex tube based spot cooling system with CO2 gas as working fluid for achieving the cumulative advantage of both, which is termed as Spot Cooled Vibration Assisted Turning (SCVAT). Its performance is evaluated and compared with Conventional turning, Vibration Assisted Turning and Vortex tube based spot cooling under constant machining conditions. The vibration and cooling parameters were also kept constant wherever applicable. The results showed a s
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Vortex Tube Jet Assisted machining"

1

Liu, Jie, and Y. Kevin Chou. "Vortex-Tube Cooling for Tool Wear Reduction in A390 Dry Machining." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64166.

Full text
Abstract:
This study investigated vortex-tube cooling for dry machining of hypereutectic silicon-aluminum alloys. Experiments and numerical analysis were employed to study vortex-tube cooling effects on tool wear and cutting temperatures. A390 alloy was machined by tungsten carbides with cutting forces and temperatures measured. Vortex-tube cooling was approximated as an impinging air jet to estimate heat convection coefficients that were then incorporated into the heat transfer analysis of cutting tool temperatures. The major findings include: (1) Vortex-tube cooling may reduce tool wear in A390 machin
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography