Academic literature on the topic 'Vysokonapěťový zdroj'

This work is concerned with power inverters for alternate high voltage power sources. The theoretical part describes the topology of inverters that can be used in alternate power sources. A model of voltage transformer is described in details to better understand the parasitic effects that are inevitably present in high voltage power sources and, therefore, have to be taken into consideration at the design of high voltage power sources. The work is oriented to problems of alternate high voltage power sources for ozone generators. This is the reason, why the theoretical and, partially, also the experimental part deal with the properties of ozone and its use. The experimental part solves high voltage inverter with capacitive load that is formed by discharge element of an ozone generator. Designed inverter is able to feed the capacitive load with high voltage at very short periods of time from several microseconds up to tens of nanoseconds. In comparison with the length of voltage pulses in common ozone generators, this pulses are more than 100-time shorter. This has a positive effect to silent discharge characteristics.

Tato dizertační práce představuje novou techniku laterární rezonanční vazby, která je využita v návrhu galvanicky izolovaného posouvače úrovně, který je následně implementován v 800 V půlmůstkovém kontroléru pro průmyslové aplikace. Ve srovnání s tradičními galvanickými izolátory jsou výrobní náklady tohoto řešení nižší. Pro aplikace vyžadující vyšší úroveň galvanické izolace je popsán následný vývoj galvanicky izolovaného posouvače úrovně, který využívá pouze jeden galvanicky oddělený posouvač úrovní pro komunikaci v obou směrech, což výrazně snižuje plochu struktury izolátoru. Jako součást následného návrhu je představen galvanický izolátor který je schopen přenášet analogovou hodnotu napětí. Analogový izolátor byl testován v reálné aplikaci síťového spínaného zdroje jako náhrada standardního optočlenu. Tato konstrukce umožňuje integraci primárních a sekundárních obvodů v jednom pouzdře, což umožní snížit složitost a cenu spínaného zdroje.

The main goal of this thesis is to design control board for the experimental electroporation device and to develop control firmware. The first chapter of this work focuses on the electroporation phenomenon itself. Behaviour of the cell model in external electrical field is described there as well as simulation and overview of how electroporation affects living tissue. It also explains the main requirements for parameters of the electroporation pulses as well as need for ECG synchronization. Furthermore, some remarks are given about novel high frequency electroporation method, which involves use of nanosecond bipolar high voltage pulse bursts. The second chapter briefly introduces commercial electroporation device called Nanoknife, including control part, power part, and it's limits. The third chapter consists of introduction of the novel experimental electroporation device developed at BUT. Power part of this device is discussed as well. Next chapter focuses on design of the control board for this device and also on description of the particular schematic parts. There is a control algorithm explanation in the fifth chapter of this thesis followed by the brief manual to machine operation.

This dissertation thesis describes a phenomenon called electroporation. It is about its theoretical aspects as well as about modeling of processes in the tissue during electroporation. Further, it describes the technical design of two developed unique experimental generators of DC and AC pulses for electroporation purposes. It also includes a description of experiments which were done using discussed generators.

Object of the master´s thesis is design of a high voltage power supply for testing insulation materials with output voltage 50 V - 2 kV at fixed frequency 50 Hz. The power supply is controlled by personal computer and measured data are sent back to the personal computer. The Universal Serial Bus (USB) is used for communication between the PC and the device.

This thesis deal with detailed conception separation control of chemical solutions by high voltage supply pair. In the first part of solving is projected galvanic separation high - voltage supply from control system. Second part deal with on programming control algorithm in PLC AMiRiS99. Third part deal with communication PC – PLC and conception finished aplication.