To see the other types of publications on this topic, follow the link: Vzduchotechnické systémy.
Dissertations / Theses on the topic 'Vzduchotechnické systémy'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 42 dissertations / theses for your research on the topic 'Vzduchotechnické systémy.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Seget, Ondřej. "Úsporné vzduchotechnické systémy v rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226839.
Full text
2
Adam, Pavel. "Využití nízkoteplotních zdrojů energie pro vzduchotechnické systémy v obytných budovách." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-233822.
Full textAbstract:
The theoretical part deals with three “ventilation systems” (VS). The first VS uses a ground/well temperature potential as a energy source for preheating or cooling fresh ventilation air. It was found out that energy savings can be achieved. In the winter, when the air flow volume was considered 150 m3/hr and ground temperature 4 and 8 ° C, the energy savings are in the range of 227-359 kWh. The electricity increase is 6 kWh of energy. In the summer, the energy savings are 17 to 38 kWh, with the electricity increase 8 kWh of energy. The second VS, i.e. system combining ventilation a solar systems, the calculation was carried out in TRNSYS computer program for two objects - a “low-energy house” (LEH) and “two-floor house” (TFH) - and 6 different solar systems modifications. The energy gains at the LEH for the 3 solar modif. are 49, 59 and 46 kWh per year (yearly consumption for heating is 2622 kWh). The energy gains at the TFH for the 3 solar modif. are 86, 134 and 129 kWh (yearly consumption for the heating is 8988 kWh). The third VS is a residential VS with liquid circuit with two compact “heat exchangers” (HE) at the inlet and outlet air. The results shows (compared to VS without heat recovery) that with the air flow volume 150 m3/h the energy savings in the winter are 1761-3148 kWh (16-hour and 24-hour operation mode). The electr. increase is 173 to 262 kWh of energy. In the exp. research the measuring section for the HE measuring was built. Then the conventional materials HE was measured. Is was found out that the selected HE is suitable for installation of the theoretically proposed systems. Its efficiency is in the range 58 - 82 % (with the air flow volume 570-55 m3/h). Measuring section was optimized and measured various hollow fibre HEs. Their efficiency are in the range 38-63 % (with the air flow volume 300-900 m3/h). Results of CO2 measurements shows that CO2 concentration is close to the value of 5000 ppm. It is much higher than max. allowed value 1200
3
Šošolíková, Jana. "Analýza efektivity VZT systémů rodinných domů." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240309.
Full textAbstract:
This Master´s thesis deals with the analysis of the effectiveness of ventilation systems. The key concept of the thesis is HVAC system in buildings with low energy demand. In the most comprehensive chapter are some concepts clarified: air tightness, ventilation, air conditioning, heating and hot water preparation. The aim of the thesis is to define passive house in terms of acquisition and operating costs, including the ventilation system and to make comparison with systems applied in conventional construction with focusing on assessment of effectiveness of ventilation equipment.
4
Lapáček, Milan. "Čištění vzduchotechnických systémů a dosažitelné energetické úspory." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232143.
Full textAbstract:
The main aim of this thesis is to explore fouling of air ducts and its influence on energy consumption of HVAC systems. The first part focuses on typical parts that create the IAQ in buildings and on evaluating energy consumption of air transportation. The following section deals with the theories of fluid flow, flow regimes and pressure losses that are created as a side effect. The thesis outlines possible methods of assessing the impact of pollution with an emphasis on pressure losses and their influence on the fan power consumption. The actual experimental measurement, conducted in a selected industrial plant, is focused on an influence of cleanness of textile diffuser on HVAC device power consumption. For the further research of this process, measuring equipment with suitable measurement method is designed and constructed.
5
Frič, Lukáš. "Vzduchotechnika panelových domů." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226872.
Full textAbstract:
Master’s thesis is interested in air-conditioning of panel buildings. It shows problems, which happen during renovation of panel buildings. Next it shows wrong solutions, which have to solve these problems and which are used a lot today. In this thesis are designed two useful solutions, which makes internal microclimate. In experimental part is made measurement and valuation of existing condition of internal microclimate in solving building.
6
Šafář, Robert. "Energetické hodnocení a aplikace rekuperačního výměníku ve vzduchotechnice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227197.
Full textAbstract:
Master thesis deals with heat recovery in ventilation systems. Thes is an experimental measurement of the plate heat exchanger for a period of one year. Thes is Compaq es the efficiency of the heat exchanger manufacturer with achal field measurements. The first part describes the theoretical heat recovery systems, thein advantages and disadvantages, the basic formula for calculating efficiency. In the second part I come to the experimental measurements of the plate heat exchanger. There sult of this thesis is to Compaq the efficacy, showing behavior exchanger seasons and energy evaluation.
7
Černík, Václav. "Návrh vzduchotechniky a vytápění pro výrobní podnik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230487.
Full textAbstract:
This master’s thesis deals with heating and HVAC in production plant ELMET, spol. s r.o. The first part of the thesis concerns reconstruction of the central heating system, which is outdated and unreliable in the time of the writing of the thesis. The second part deals with cooling of mounting of electronics, where technological requirements are not met due to summer overheating. The third part of the thesis concerns ventilation of metalworking hall using waste heat from production machines.
8
Faltys, Michal. "Variantní řešení rekonstrukce systémů vzduchotechniky prostoru laboratoří." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227769.
Full textAbstract:
The diploma thesis deals with the designing and assessment of two variants of the reconstruction of the air conditioning system for the half of 3rd floor laboratory building BioVendor – Laboratorní medicína a.s. company. The system is proposed to fulfil hygienic, operational, economic and functional requirements for indoor microclimate of laboratories. The task of this system is the transport of fresh air to interior and the covering of heat gains in summer. The equipment is also designed for the regulation of air humidity in the interior. The theoretical part deals with the application of heat penetration of solar radiation double glazed construction. Calculating and project part deals with the specific proposal of two variants of a new HVAC system-level studies of which the selected variant is developed as the project documentation. Experimental part is devoted to measuring of CO2 concentration in operationally similar laboratory. The result of this work is to evaluate the operational and economic impacts on the choice of technically feasible options and implementation documentation selected option. The benefit of the experiment is to verify sufficient air exchange to ensure the optimum concentration of carbon dioxide in laboratories.
9
Očkan, Tomáš. "Vzduchotechnika hotelového komplexu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226817.
Full textAbstract:
The first part of the thesis is aimed on creating internal microclimate of the hotel complex by air conditioning systems. The choice of systems is based on theoretical knowledge’s and practical application in abroad. In the second part there is designed solution for hotel apartments and conference hall. The other areas are designed only conceptual. Technical solutions of chosen systems are the main outcome of the thesis. In the third part there are published my experimental measurements from laboratories of Oulu University of Applied Sciences. For the study field of Air Conditioning has been chosen Air Flow Measurement and Test Operation of HVAC unit. For the study field of Renewable Energy has been chosen the Heat Pump and for study field of Refrigeration has been chosen Water Cooling and Chiller Box.
10
Adamec, Jan. "Vzduchotechnika pro technologické čisté prostory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226866.
Full textAbstract:
The main objective of this thesis is to propose and evaluate two variants of HVAC systems for clean rooms. The proposed system is pressurized. As part of the experimental section in which the data obtained are evaluated - humidity and air temperature.
11
Otava, Jiří. "Návrh vzduchotechnického zařízení s ohledem na systém zpětného získávání tepla." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265724.
Full textAbstract:
This diploma thesis is focused on problems of heat exchangers. There are two main objectives. The first objective is based on long-term measuring of enthalpy heat exchanger, processing of measured data and comparison of result with manufacturer's results. The second objective is design of variant solutions for two types of heat exchanger of air conditioning unit of selected shop. For variant without moisture transportation was selected cross flow exchangers. Thanks to knowledge from long-term measurement, was selected enthalpy heat exchanger for variant with moisture transportation. Chosen variants were compared with emphasis on heat and moisture exchange efficiency with requirements on Ecodesign.
12
Matějíček, Michal. "Modelování, simulace a experimentální měření reakce systémů vytápění/vzduchotechniky na požadavky regulace." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392106.
Full textAbstract:
The diploma thesis deals with the behavior of technical systems of the student dormitory in Brno. The temperature and humidity climate was measured and evaluated in the building. The measurement is then compared with the computer simulation created in DesignBuilder. The geometric model of the building was created in Revit, which supports BIM technology. Based on the evaluation of the experiment, the optimization of the technical systems in the building was proposed.
13
Halm, Petr. "Návrh vytápění a vzduchotechniky novostavby s nízkými energetickými náklady." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241667.
Full textAbstract:
The thesis is aimed on a proposal from heating sources, heating systems and ventilation of family house. Designing of a house is provided by Keeo4design. This proposal contains a complex of two houses. The first one is used for residential purposes, the other is made up of mostly parking garages. The work focuses on heat loss calculation objects. Subsequently, on a proposal from heating sources, heating systems, ventilation systems and their regulation.
14
Potočník, Jan. "Návrh vytápění a vzduchotechniky pro dvoupatrový rodinný dům po rekonstrukci." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254402.
Full textAbstract:
The thesis is focused on the design of the reconstruction of a house built in the 70s of the last century. Part of this work is an introduction with the current state of the object and calculation of the appropriate heat losses. In the next step, renovations containing building insulation, replacement windows and doors, replacement of the heating system and the installation of air conditioning are made. Based on the design of the adjustments are again calculated heat losses and a comparation of energy savings is made. Another part of the proposal focuses in detail on heating system and its regulation. The final chapter deals with the design of the ventilation device using heat recovery. Attachments contain detailed calculations and necessary documentation.
15
Švub, Oldřich. "Systémy techniky prostředí pro udržitelnou výstavbu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226867.
Full textAbstract:
Diploma thesis deals with relationship between the sustainability of buildings and indoor climate. The aim of the diploma thesis was to design the air conditioning system for operating theaters. In the experimental part the aim was to provide total microorganisms counts and total count of micromycetes on samples taken from filters. The work is divided into three parts: theoretical, design and experiment.
16
Fux, Ondřej. "Polyfunkční dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227752.
Full textAbstract:
This thesis describes the design of a multifunctional three-storey house. The proposal includes the choice of the structural system, the choice of walls, windows, designing footings, staircases, numerous parking areas, flat roof drainage, management of rainwater. The specialized section is designed ventilating buildings with VRF systems heating / cooling with heat pumping. A check is a calculation of bearing capacity of ceiling construction.
17
Rizner, David. "Bytový dům v Blansku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240330.
Full textAbstract:
The aim of this diploma thesis is to design a new building apartment house in the city of Blansko. The object is of four floors with no cellars and is situated in the southern part of Blansko. The object consists of 23 apartments, 2 of which are of special designation. Moreover there is also a coffee place, an engineer’s office, a hairdresser with nail studio and a copy place. VELOX is the main building system. Design of forced air in a coffee place is included to the project.
18
Truksa, Ondřej. "Návrh větrání a chlazení v multifunkční budově se zubními ordinacemi." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378484.
Full textAbstract:
The aim of the master’s thesis was to design ventilation and cooling systems in a three-storey mixed-use building, which contained three apartments and two dentists’ surgeries. Two independent ventilation systems were designed in the building, with respect to different purposes of the indoor spaces. The mechanical cooling system was proposed in some of the rooms to improve thermal comfort in summer. The thesis includes calculations of building heat gains, heat losses, air exchange rates and the dimensioning of the ventilation and cooling systems. The thesis also comprises design calculations and technical drawing.
19
Jelínek, Ondřej. "Vliv vzduchotechnických zařízení na akustické mikroklima čistých prostorů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-355617.
Full textAbstract:
The work description is to create a system of measures to prevent the spread and the consequent attenuation of sound in air handling systems serving the cleanrooms. The thesis presents a solution to noise attenuation in the investigated area, and in HVAC duct, which uses a commercially available material in the form of sound insulation hoses. In the systém solution is part of the work focuses on the optimal design of terminal elements to distribute air in a clean room. Processing methods utilize theoretical and experimental approach. The experiment comprises a unique analysis of the sound insulation properties of selected products under specific conditions. The data obtained are analyzed and incorporated into the framework of this work created program module for determining the attenuation and noise propagation in an enclosed space. Math and physical dependence are programmed into their own DLL by programming language DELPHI.
20
Dohnálek, Ondřej. "Nadstandardní studentské bydlení v Olomouci." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265426.
Full textAbstract:
This diploma thesis deals with the processing of project documentation of student housing in the city of Olomouc. The building is located near the university dormitory accommodation of Palacky University. It is designed to complement the missing type of accommodation. Building is a L-shaped five-storey, without a basement and with a flat roof. Structural system is mostly brick, only part of first floor is solved by columns. The building is divided into three building complexes. Two wings for the accommodation have 4 floors. The connector block has five floors, where the 5th floor is only the engine room. Foundation structures are concrete strips and foundation pads. South side of the building is protected from the sun by sunscreens, on which in a future could be installed photovoltaics. The building is divided into three parts in terms of functionality. 1.NP consists of commercial premises in the southern block and private rooms for accommodated in the eastern block. 2nd-4th floor forms spaces designed to accommodate students. Accommodation capacity is 105 people.
21
Halla, Ondřej. "Mikroklima bazénových hal." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391922.
Full textAbstract:
The diploma thesis deals with the problems of the indoor environment of swimming pool halls. Firstly, it describes issues and principles of designing HVAC system in the areas with high humidity production. Thesis then focuses on various approaches to calculations of evaporation from the water surface and different possibilities of dehumidification including different types of HVAC units. This knowledge was applied to the design of HVAC system for particular assigned building, for which are proposed two different solutions. Thesis includes experimental part, its aim is to analyse one specific critical part of the hall. Based on local surveying and long-term measurements a few possibilities of improvement are suggested.
22
Seidlová, Andrea. "Požadavky na zadávací dokumentaci veřejných zakázek na stavební práce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226816.
Full textAbstract:
This thesis focuses on the issues related to the requirements of the contracting authority contained in the tender documents of public works contracts. In the first part, the basic concepts of public procurement are explained, where most attention is devoted to particular tender documents. The second part deals with the situation of public procurement in the Czech Republic, during the years following the opinion of the newly released energy efficient buildings. A case study is used to determine whether the use of economic net present value (NPV), as the evaluation criteria for the selected public order.
23
Gőghová, Orsolya. "Penzion s pivovarem." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225740.
Full textAbstract:
New building pension with brewery is situadet in town Prostejov. Object has 3 overground floors and flat roof, it has no cellar. On ground floor is situated the brewery, medium large kitchen with storages, sanitary and the restaurant. Kitchen is designed for preparing 150 meals, capacity of restaurant on the ground floor is 81 place and on the galery is 70 . On this floor has been situated room for invalids also. On the further floors are rooms for guests and technical area for air design system.
24
Musil, Zdeněk. "Teplovzdušný vytápěcí a větrací systém pro nízkoenergetický rodinný dům." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230423.
Full textAbstract:
The diploma thesis deals with warm-air heating and ventilation system of energyefficient family house. The part of thesis is theoretical introduction to low-energy and passive houses, ventilation and heating. The proposal itself is based on the applicable standards and includes all progressive steps, including the calculation of the thermal performance and sizing individual parts of the system. The drawing project documentation is listed in appendixes.
25
Kropáč, Petr. "Polyfunkční dům v Šumperku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265598.
Full textAbstract:
The subject of this thesis is the implementation of the project documentation construction of polyfunctional house. The future object will be located in Šumperk Street Šumavská and fits seamlessly into the surrounding buildings. The building is detached, it has five floors and no basement. Construction system is primarily wall, only some elements of the framed. The roof of the object is flat and will not be operational. On the first floor there is a snack bar and two shops are also located on the first floor of technical facilities and common areas for residential units. On the second floor is office space for the two companies. In the amounts of ground floors for living spaces. Altogether there will be located fifteen housing units.
26
Vaňková, Jana. "Knižnica." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227245.
Full textAbstract:
Diploma thesis addresses the implementation and design of the new library object. The proposed building will serve as public city library with the possession of 102 200 book units. The building will offer department for adults as well as kids section, technical literature, an audiovisual collection, computer rooms and study rooms, reading rooms. There are also plenty of chill zones. In the building are additional services as coffee shop, gallery and lecture hall for different kinds of events and purposes. Library has three floors and one basement solved as an underground parking lot. The building is roofed by warm flat roof. The structural system is reinforced concrete skeletal system with glass facade system, the external wall in some places as sanitary facilities, secondary staircase and coffee shop is walled with bricks with an external thermal insulation composite system. The ground plan of the library is square with dimensions 35, 45 x 35, 45 meters. The building is located in the city centre of Písek, surrounding terrain is slightly sloping. The solved area contains newly designed asphalt road, which leads to the underground parking lot.
27
Karásková, Zuzana. "Veterinární klinika." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240019.
Full textAbstract:
This diploma thesis deals with veterinary clinics in Prostejov. The building is secluded on almost flat land. The building has a simple rectangular shape, replicating the street, with a receding second floor. The building is brick, two-storey, basement, covered with a flat roof and green roof terrace. On the first floor are situated surgeries, surgeries, operating rooms, facilities for employees and utility room. On the second floor there is a pet shop, counseling, treatment plant dog, sanitary facilities for public office and facilities for temporary accommodation of employees, where it is possible to get to the green roof terrace. The building is insulated, partially with white plaster and partly with wooden facade panels. The building is in part intended for the general public designed wheelchair.
28
Fikejsl, Tomáš. "Technická zařízení budov v budovách s téměř nulovou spotřebou." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265497.
Full textAbstract:
The thesis deals with the issue will be nearly zero energy. The theoretical part is divided into several chapters. Describes the requirements of applicable legislation of the Czech Republic and the EU and the application of renewable energy in these buildings. The third and last part serves as a basis for part of the experiment. Calculation section applies theoretical knowledge into practice. The subject has become a new residential building in which they are designed to ensure the technical equipment required internal environment. The proposal concerns the heating, ventilation, cooling, domestic hot water and lighting. At the end are attached graphic of energy performance certificates (PENB) and evaluated the economic and ecological point of view. The experiment deals with the measurement of the internal microclimate administrative building type in Brno, with regard to the requirements of current legislation of the Czech Republic.
29
Blažková, Klára. "Teorie vnitřního prostředí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225941.
Full textAbstract:
The aim of master's thesis is to find an optimal solution in terms of window shielding factors in shaping the internal environment in the interior. In therms of this work there was used a computer program Teruna to created mathematical model entered the room in the experimental section. The theoretical part inquires into the theory of the internal environment. The project inquires into the design and application of a mathematical model of two variants room office in the premises of the factory building.
30
Králíková, Zuzana. "Základní škola." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227161.
Full textAbstract:
Diploma thesis solves the design of the elementary school. The building is situated in Letohrad in region Pardubice. The design of the school building contains small sport hall for pupils and for possible public access. Dinning room and the kitchen are the parts of the building. The object is designed as structural masonry system, ceramic bricks with external thermal insulation composite system. Building does not have a basement. The object is divided to three parts, teaching part, dining room with kitchen and sports hall with facilities. The building has two-storey in the teaching part, the remaining part is a single-storey with vegetation roof. All roofs are designed as a warm flat roof. The building is designed for capacity 150 pupils. Building ventilation is provided by air-conditioning equipment. Entrance to the building is barrier-free, it is installed a building elevator inside.
31
Vacenovský, Jan. "Návrh zařízení pro úpravu mikroklimatu v rekonstruovaném rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378499.
Full textAbstract:
This work is devoted to the design of a microclimate facility in a family house. The first part contains analysis of thermal losses before and after using thermal insulation. Based on this analysis, a heating system is proposed, including the necessary technical calculations for the operation of the system. As a heat source, a condensing boiler is selected. At the next point, the thesis focuses on the calculation of the heat gains in selected rooms in order to design a cooling device. A multisplit system is selected for cooling the rooms. In the next part the thesis deals with the design of forced ventilation of selected rooms. The ventilation system provides the necessary air exchange and covers heat losses through ventilation. At the end of the thesis is outlined the concept of regulation of individual systems and also the requirements for individual professions are described.
32
Nevrlý, Jaroslav. "Energeticky efektivní řadový rodinný dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265510.
Full textAbstract:
The main aim of the thesis was to create design documentation, energyefficient terraced house in the village of Moravian Knínice. The proposed building will be located in the vacant space between buildings. Layout of the building is limited by the size of building lots located in hillside surrounding buildings, and orientation to the cardinal. The thesis deals with the layout, building and construction, buildings, so that it effectively uses renewable energy and efficiently work with them.
33
Michna, Martin. "Hotel v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265230.
Full textAbstract:
In this thesis are solved the newly built 'hotel in Brno ". The building is freestanding. It has five storeys. The structural system is reinforced concrete skeleton. Columns in combination with masonry infill Porotherm. The building is based on the footings. The building has two height levels. The first is covered with a flat roof vegetation and the second single-roof bitumen sheets. The building is insulated contact system. On the first floor is a reception, restaurant with kitchen, fitness center and facilities for the hotel staff. The second floor of the portion used for guest accommodation. The second part is a cafe with cold kitchen and meeting room attached to the bar. In the third to fifth floors are guest rooms and technical background. On the fifth floor are apartments
34
Kuráňová, Helena. "Výměníky tepla." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392077.
Full textAbstract:
The master thesis deals with the issue of heat recovery and efficiency of exchangers. The experimental part is dedicated to the measurment of efficiency of a plastic model of heat exchanger with atypical construction compared to a standard plate heat exchanger. For production of the heat exchangers 3D printer was used so the thesis uses the possibilities that 3D printing is offering nowadays.
35
Kuchaříková, Andrea. "Kulturní centrum Puppet." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410039.
Full textAbstract:
This diploma thesis presents a project documentation for construction of a community centre with a restaurant. Its construction site is located on the outskirts of town Jaroměřice nad Rokytnou, Poděbradova street. The building is composed from three parts, which are connected to each other. The first part houses the restaurant with its facilities. This part is a single floor structure covered by a flat green roof. Its façade is formed by white boards composed into an asymmetrical pattern. The second part serves as a backstage area where all the necessary facilities are located. This second part of the building is as the first part a single floor structure covered by a flat green roof. Its façade is formed by façade timber boards. The main entrance is located in the middle part, which is the third part the building. It has two floors and it houses an auditorium, a bar and amenities. Its façade is formed by trapezial boards. The construction system is formed by load bearing walls and by prestressed concreted floor panels or in some parts by cast-in-place reinforced concrete slabs. The building has strip foundations. Its interior walls are built from sand-limestone bricks with acoustic properties. The perimeter walls are covered with ventilated façade with mineral wool thermal insulation. The heating of the community centre is powered by gas boiler connected to single-vent chimney with ventilation shaft.
36
Toboláková, Andrea. "Vytápění objektu se vzduchotechnikou." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372212.
Full textAbstract:
The main goal of the diploma thesis is to design a heating system and hot water heating for a newly built wellness hotel placed on the beach nearby reservoir Vranov. The theoretical part is focused on the build heating with solid fuels specifically pellets. In the calculation part is processed the proposal of heating systems, the heat sources, the water heater and other equipment. The last part of the project includes a technical report and drawing documentation at the level of implementation of the project.
37
Král, Jakub. "Energeticky efektivní řadový rodinný dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227602.
Full textAbstract:
The aim of my diploma thesis is a design of a new energy efficient terraced house in the gap site. Building has two dwelling unit of category 4+kitchenette and 6+ kitchenette. Building has a cellar, two floors and an attic. The cellar structures and horizontal structures are made of reinforced concrete. Sand-lime bricks are used for masonry. The building is covered with gabled roof with timber roof truss. In this building there are used rainwater and renewable energy in a form of electrical energy made by photovoltaic panels.
38
Žemlová, Eva. "Mateřská škola." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227270.
Full textAbstract:
This thesis describes the design of a kindergarten in Novy Jicin. It is a detached building on a large and gently sloping land. Visually, kindergarten divided into three parts and it is on two-storey part of themselves compartment attached with two-storey in the middle part. The building has a rugged design (form L-shaped). The building is brick sand-lime blocks with contact thermal insulation system, based upon the strips foundation, nobasement and covered with a warm flat roof. In the single-storey part there is the only MS (max. 25 children). In the middlesection of two-storey there is a main part of kindergarden on the first floor and kindergarten facilities located on the second floor there is a small department with special classes (max. 10 children). The layout of the building is consistent with the operation of kindergartens, fulfill the requirements for barrier-free use, safety, fire resistance and overall stability. The building includes parking for 15 cars. The work includes project documentation for the construction and specialization.
39
Navrátil, Michal. "Centrální požární stanice Svitavy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410054.
Full textAbstract:
The diploma thesis elaborates the project documentation for the construction of a new apartment of central fire station type C1 with the administrative part of the Territorial Department. The fire station is technologically linked to the second building SO.02 the technical and technological background of the fire station. The building is situated on the eastern edge of Svitavy. The building is non-cellular, it has three floors and a flat green roof. Three floors fulfilling matter with mainly administrative function is connected with two floors blocks fire station with an indoor gym. Above the floor containing garages for emergency vehicles facilities for the emergency unit are placed with a curtain that creates fading of the emergency door. The matter of the gym is optically separated from the station and highlighted with a volume narrow neck and height elevation. In the station there are training places and places for general physical preparation. The buildings are located in a sloping terrain. The ground fire station has a heliport. The establishment supporting columns of the building are for made of prefabricated calyx, and are concreted into monolithic foundation pads. Infill wall vertical bearing and non-bearing structures are designed from clay blocks type THERM. The bearing system is reinforced concrete prefabricated frame. Horizontally bearing structures are designed from prestressed hollow core slabs. The building envelope is made of a curtain wall in dark grey and red combined with a light contact thermal insulation system used on the indoor gym. The envelopes are in the administrative part and the part of the station divided by a glazed area. In the workshops and technology room the envelope is divided by lamellae. Usually there are 13 firemen during one shift, in three shifts there work 39 firemen all together. There are supposed to be 17 employees in the administrative department.
40
Řehoř, David. "Hotel." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227321.
Full textAbstract:
The objective of this thesis is to draw up the design documentation for the construction of a hotel. The hotel is situated on the edge of the golf resort Kaskáda near to Jinačovice. It’s a brick building with two above – ground floors and one underground. There is the staircase in the building that creates protected escape route. The perimeter wall is designed of ceramic bricks Porotherm T Profi. They are filled – in by mineral wool. The hotel is divided into three dilatational parts. There are 35 guest rooms in the hotel; two of them are barrier – free, in total 63 beds. In the ground floor there are entrance, reception, restaurant, bar, kitchen with the background. In the basement there are technical equipment, a fitness room, a wellness, changing rooms, washrooms and a bar. The roof of the hotel is flat. There is the terrace accessible from the apartments in the second floor above the restaurant.
41
Svoboda, Jan. "Sportovní centrum Polička." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240241.
Full textAbstract:
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.
42
Pilný, Ondřej. "Zdravotnické středisko Hlinsko." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372049.
Full textAbstract:
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.