Relevant bibliographies by topics / Waste combustion

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Waste combustion'

Author: Grafiati
Published: 4 June 2021
Last updated: 3 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Waste combustion.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Waste combustion"

1

Topal, Huseyin, and Ehsan Amirabedin. "Determination of some important emissions of poultry waste co-combustion." Scientific Journal of Riga Technical University. Environmental and Climate Technologies 8, no. -1 (2012): 12–17. http://dx.doi.org/10.2478/v10145-012-0002-1.

Full text
Abstract:
Abstract Poultry Wastes (PW) are rich biomass types which can be utilized as renewable energy sources in energy conversion systems. The PW is a mixture of poultry litter and organic materials spread on the poultry houses ground. In this paper, combustion of the poultry waste alone and mixed with coal in a combustor set up are implemented, and emissions are monitored. Experimental results reveal that, co-combustion of PW in an existing combustor firing coal can be considered as the best environment-friendly remedy to dispose the facility wastes while reducing the combustion emissions of the system.
APA, Harvard, Vancouver, ISO, and other styles
2

Randall Seeker, W. M. "Waste combustion." Symposium (International) on Combustion 23, no. 1 (1991): 867–85. http://dx.doi.org/10.1016/s0082-0784(06)80341-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Duranay, Neslihan. "CO2 emission from combustion of lignite, waste plastics and biomass mixture pellets." Chemical Industry and Chemical Engineering Quarterly 25, no. 3 (2019): 239–46. http://dx.doi.org/10.2298/ciceq180921002d.

Full text
Abstract:
Combustion is a familiar technique for disposal of urban wastes such as plastics when their recycling is impractical. It offers energy recycling and waste diminution. In this paper, combustion behaviours of blend pellets composed of binary and triple mixtures of plastic wastes, biomass and lignite in a laboratoryscale fixed-bed combustion system were examined. The materials chosen as waste plastic, biomass and lignite were, respectively, market plastic bags, furniture plant waste powder and Bing?l Karl?ova lignite. The effect of varied blend pellet composition on the combustion behaviour and CO2 emission in flue gas during combustion was examined. It was observed that the rate and efficiency of combustion increased with increasing plastic ratio in the blend pellets. It was found that the amount of carbon increased with the ratio of waste plastics added to blends, which also increased the CO2 ratio in the flue gas during the volatile matter combustion period. It was concluded that burning waste plastic bags with low-quality lignite or waste biomass could be a viable option to get rid of them and to gain energy.
APA, Harvard, Vancouver, ISO, and other styles
4

Spisak, Jan, Dusan Nascak, and Daniela Cuchtova. "Conception Of Innovated System For Waste Disposal." European Scientific Journal, ESJ 12, no. 5 (2016): 35. http://dx.doi.org/10.19044/esj.2016.v12n5p35.

Full text
Abstract:
Every year wastes are becoming a bigger problem which every individual or government must take note and solve it on the fly. If certain energy standards are fulfilled, the waste recovery in incineration plants or similar technological devices is possible. This measure should lead to more efficient waste combustion and its energy recovery. In our conditions, this can be achieved so that the heat generated during combustion will be also used to generate electricity respectively thermal energy. For a more efficient and optimal waste treatment was proposed a three-stage combustion system concept.
APA, Harvard, Vancouver, ISO, and other styles
5

Johari, Anwar, Ramli Mat, Mohd Johari Kamaruddin, Tuan Amran Tuan Abdullah, Wan Rosli Wan Sulaiman, and Asmadi Ali. "Combustion of Municipal Solid Waste in a Pilot Scale Fluidized Bed Combustor." Advanced Materials Research 931-932 (May 2014): 1015–19. http://dx.doi.org/10.4028/www.scientific.net/amr.931-932.1015.

Full text
Abstract:
Combustion study of municipal solid waste combustion in a pilot scale fluidized bed combustor had been carried out. The work was aimed at demonstrating sustainable combustion of municipal solid waste by employing operating parameters gained from previous studies. The primary and secondary air factor used were AF = 0.8 and AF = 0.6 respectively. The fluidization number was 5Umf and both in-bed and freeboard region temperature distributions were monitored continuously. Results on the combustion studies revealed that the initial bed temperature could be sustained due to high thermal capacity of sand but later dropped due to problem related to the mixing of bulky and heterogeneous components of municipal solid waste and sand.
APA, Harvard, Vancouver, ISO, and other styles
6

Gulyurtlu, I., T. Crujeira, M. H. Lopes, et al. "The Study of Combustion of Municipal Waste in a Fluidized Bed Combustor." Journal of Energy Resources Technology 128, no. 2 (2006): 123–28. http://dx.doi.org/10.1115/1.2191507.

Full text
Abstract:
The combustion behavior of municipal solid waste was studied in a pilot fluidized bed combustor. The waste was pelletized prior to its use. Both co-firing with coal and combustion of waste alone were under taken. The combustion studies were carried out on the pilot installation of INETI. The fluidized bed combustor is square in cross section with each side being 300mm long. Its height is 5000mm. There is a second air supply to the freeboard at different heights to deal with high volatile fuels. There was a continuous monitoring of the temperatures in the bed, as well as the composition of the combustion gases. The combustion gases leaving the reactor were let go through the recycling cyclone first to capture most of particulates elutriated out of the combustor. There was a second cyclone, which was employed with the aim of increasing the overall efficiency of collecting solid particles. The gaseous pollutants leaving the stack were sampled under isokinetic conditions for particulate matter, chlorine compounds, and heavy metals. The ash streams were characterized for heavy metals. The results obtained were compared with national legislation. The results obtained suggest that (i) the combustion efficiency was very high, (ii) there was an enrichment of ashes with heavy metals in the cyclones compared to the bed material, (iii) in general, the flue gas emissions were below the permited limits, and (iv) for the compliance with the new European directive for stricter emission limits adequate control devices, like bag filters, should be integrated with refuse derived fuel (RDF) combustion.
APA, Harvard, Vancouver, ISO, and other styles
7

Arsenijevic, Zorana, Zeljko Grbavcic, Bosko Grbic, et al. "Fluidized bed combustion of pesticide-manufacture liquid wastes." Journal of the Serbian Chemical Society 75, no. 4 (2010): 523–35. http://dx.doi.org/10.2298/jsc090820024a.

Full text
Abstract:
Industrial liquid wastes can be in the form of solutions, suspensions, sludges, scums or waste oil and have organic properties. The objective of this work was to demonstrate the technical feasibility of a fluidized bed as a clean technology for burning liquid waste from a pesticide production plant. The combustion of liquid waste mixtures, obtained from realistic samples, was investigated in a pilot scale fluidized bed with quartz sand particles of 0.63-1.25 mm in diameter and 2610 kg/m3 in density at 800-950?C. To ensure complete combustion of liquid waste and additional fuel, the combustion chamber was supplied with excess air and the U/UmF (at ambient temperature) was in between 1.1 and 2.3. In the fluidized bed chamber, liquid waste, additional liquid fuel and air can be brought into intense contact sufficient to permit combustion in bed without backfire problems. The experimental results show that the fluidized bed furnace offers excellent thermal uniformity and temperature control. The results of the combustion tests showed that degradation of liquid wastes can be successfully realized in a fluidized bed with no harmful gaseous emissions by ensuring that the temperatures of both the bed and the freeboard are not lower than 900?C.
APA, Harvard, Vancouver, ISO, and other styles
8

Johnson, Larry D. "Detecting waste combustion emissions." Environmental Science & Technology 20, no. 3 (1986): 223–27. http://dx.doi.org/10.1021/es00145a001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Seiichiro Kumagai, Hisashi Inaga, and Hideo Aono. "5038690 Waste combustion system." Environment International 18, no. 3 (1992): XX—XXI. http://dx.doi.org/10.1016/0160-4120(92)90195-a.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Da Cheng, Cai Fu Qian, and Xiao Zhou Liu. "New Model of Waste Comprehensive Combustion." Advanced Materials Research 490-495 (March 2012): 2400–2404. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.2400.

Full text
Abstract:
Through the derivation of waste pyrolysis and combustion dynamics of basic equations, a combustion of waste combustion model of an integrated is put forward. According to this model, By using the determination of activation energy and frequency factor values which has been recognized as, and using of numerical simulation method, We can get the appropriate waste combustion characteristics curves. To compare the waste combustion characteristics curves gained by the comprehensive combustion model numerical calculation using numerical calculation between the waste combustion characteristic curve of the combustion test, the correctness of this waste combustion model is confirmed. The results have great significance for the waste combustion numerical computation and practical engineering design guidance
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Waste combustion"

1

Kusar, Henrik. "Catalytic combustion of gasified waste." Doctoral thesis, KTH, Chemical Engineering and Technology, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3600.

Full text
Abstract:
<p>This thesis concerns catalytic combustion for gas turbineapplication using a low heating-value (LHV) gas, derived fromgasified waste. The main research in catalytic combustionfocuses on methane as fuel, but an increasing interest isdirected towards catalytic combustion of LHV fuels. This thesisshows that it is possible to catalytically combust a LHV gasand to oxidize fuel-bound nitrogen (NH3) directly into N2without forming NOX. The first part of the thesis gives abackground to the system. It defines waste, shortly describesgasification and more thoroughly catalytic combustion.</p><p>The second part of the present thesis, paper I, concerns thedevelopment and testing of potential catalysts for catalyticcombustion of LHV gases. The objective of this work was toinvestigate the possibility to use a stable metal oxide insteadof noble metals as ignition catalyst and at the same timereduce the formation of NOX. In paper II pilot-scale tests werecarried out to prove the potential of catalytic combustionusing real gasified waste and to compare with the resultsobtained in laboratory scale using a synthetic gas simulatinggasified waste. In paper III, selective catalytic oxidation fordecreasing the NOX formation from fuel-bound nitrogen wasexamined using two different approaches: fuel-lean andfuel-rich conditions.</p><p>Finally, the last part of the thesis deals with deactivationof catalysts. The various deactivation processes which mayaffect high-temperature catalytic combustion are reviewed inpaper IV. In paper V the poisoning effect of low amounts ofsulfur was studied; various metal oxides as well as supportedpalladium and platinum catalysts were used as catalysts forcombustion of a synthetic gas.</p><p>In conclusion, with the results obtained in this thesis itwould be possible to compose a working catalytic system for gasturbine application using a LHV gas.</p><p><b>Keywords:</b>Catalytic combustion; Gasified waste; LHVfuel; RDF; Biomass; Selective catalytic oxidation; NH3; NOX;Palladium; Platinum; Hexaaluminate; Garnet; Spinel;Deactivation; Sulfur; Poisoning</p>
APA, Harvard, Vancouver, ISO, and other styles
2

Sørum, Lars. "Environmental aspects of municipal solid waste combustion." Doctoral thesis, Norwegian University of Science and Technology, Norwegian University of Science and Technology, 2000. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gopalakrishnan, Priya. "Effects of the reacting flowfield on combustion processes in a stagnation point reverse flow combustor." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22682.

Full text
Abstract:
Thesis (Ph. D.)--Aerospace Engineering, Georgia Institute of Technology, 2008.<br>Committee Chair: Seitzman, Jerry; Committee Member: Gaeta, Richard; Committee Member: Jagoda, Jeff; Committee Member: Neumeier, Yedidia; Committee Member: Yoda, Minami; Committee Member: Zinn, Ben.
APA, Harvard, Vancouver, ISO, and other styles
4

Kan, Tie. "Combustion of solid waste in a pulse incinerator." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/12975.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ou, Jenq-Jang. "The combustion of fossil and waste solid fuels." Thesis, Imperial College London, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.308074.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Laryea-Goldsmith, Rene. "Concurrent combustion of biomass and municipal solid waste." Thesis, Cranfield University, 2010. http://dspace.lib.cranfield.ac.uk/handle/1826/5580.

Full text
Abstract:
This PhD research project is primarily an investigation of the gaseous pollutant emissions arising from concurrent combustion of biomass and municipal solid wastes materials, using a fluidized bed combustor. Of the wide range of biomass energy resources available, dried distillers’ grains with solubles and wheat straw were chosen as two example agricultural by-products of the human food supply chain. To consider an integrated waste management programme, a residual waste resource from a materials recycling facility was identified as a waste materials source that could be utilized after materials recycling was performed (which is a higher priority activity with respect to energy recovery). Cont/d.
APA, Harvard, Vancouver, ISO, and other styles
7

Kleiss, Torsten. "Institutional arrangements for municipal solid waste combustion projects." Weimar Bauhaus-Univ, 2008. http://d-nb.info/992651913/04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Moradian, Farzad. "Co-Combustion of Municipal Solid Waste and Animal Waste : Experiment and Simulation Studies." Licentiate thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-3679.

Full text
Abstract:
Co-combustion of animal carcasses and slaughterhouse waste products (animal waste), which are classed as high-risk infectious waste, has been considered as a “fuel opportunity” for waste-to-energy boilers. In this study, the impact of co-combustion of animal waste with municipal solid waste (MSW) on operational issues such as bed agglomeration, deposit formation and emission was investigated, employing experimental and theoretical methods. In the experimental section, a series of full-scale tests in a bubbling fluidised-bed boiler were carried out, to determine the effects of animal waste co-combustion on the issues addressed. Two combustion scenarios were considered, identified as the reference (Ref) case and the animal waste (AW) case. In the Ref case, a solid-waste fuel mix, consisting of sorted and pretreated industry and household waste was combusted. In the AW case, 20 wt% AW was added to the reference fuel mix. The collected samples, which included super-heater deposits, fuel mixes and bed and fly ashes, were analysed, using chemical fractionation, SEM-EDX and XRD. In addition, the flue gases´ emission rate were continuously analysed, using FTIR spectrometry. The results showed positive effects from co-combustion of AW, indicating decreased deposit formation and lower risk of bed agglomeration, as well as reduced emissions of NOx and SO2. Moreover, it was found that the concentrations of P, Ca, S and Cl were enriched in the bed materials. In the theoretical section, thermodynamic calculations, with respect to experimental data, were performed to provide greater understanding of the ash transformation behaviour and the related melting temperature. The calculations mainly focused on bed agglomeration, where addition of AW to the MSW considerably reduced the risk of agglomeration. The results of equilibrium products and phase diagram information for the bed ashes suggested melt-induced agglomeration as a possible cause of the formation of sticky layers on the bed particle in the Ref case. Moreover, it was concluded that higher amounts of calcium phosphate and sulfates increased the first melting temperature of the bed ashes in the AW case.<br><p><strong>Sponsorship</strong>:</p><p>Waste Refinery and Sparbanksstiftelsen Sjuhärad</p>
APA, Harvard, Vancouver, ISO, and other styles
9

Eriksson, L. Gunnar. "Combustion of solid waste from wood-based ethanol production /." Luleå, 2005. http://epubl.luth.se/1402-1757/2005/22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gudim, Simen Johan. "Haraldrud Municipal Solid Waste Combustion Plant in Oslo : Optimizing, Stabilizing and Modeling the Combustion Process." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for teknisk kybernetikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-13233.

Full text
Abstract:
This thesis has studied Haraldrud MSW combustion process. Haraldrud is a realcombustion plant burning waste for citizens of Oslo. A thoroughly description ofthe combustion process has been presented based on manipulating and analyzing theprocess, together with long discussions with the plant engineers. Working with a realplant is time-consuming, challenging and very informative. Rarely theories are easyto implement on a real plant, and the focus of this thesis has been to connect theoryand practice. All simulations are based on real process data.Burning MSW is a complex process to control, and several factors including;unknown calorific value, regulation of the waste flow, and the long time constant formeasuring and regulating the energy contributes to this. Today’s unknown calorificvalue and measuring the energy from the combustion can be calculated from flue gasmeasurements. By implementing these in a new controller at Haraldrud the variationin energy from the combustion will be reduced and results in waste flow increase.One method to develop a model and estimate the model parameters is to decide amodel set and estimate the model parameters based on system identification theory.An open-loop system identification test was applied to the combustion process. Further,the model parameters to a MIMO ARX model were estimated from recordedtest data. It was concluded that the process variation in the gathered open-loopdata was too large, which resulted in a poor model. The model should instead beestimated based on closed-loop identification.Another method to estimate the model parameters is to use a control law toestimate the parameters on-line. Gradient method is one control law and has beenvalidated from recorded process data. The simulation shows that the estimated andmeasured outputs followed each other perfectly.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Waste combustion"

1

Landrum, V. J. Municipal waste combustion assessment: Medical waste combustion practices at municipal waste combustion facilities. U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Landrum, V. J. Municipal waste combustion assessment: Waste co-firing. U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Seminar on Recovery of Energy from Municipal and Industrial Waste through Combustion (1988 Churchill College). Energy recovery through waste combustion. Elsevier Applied Science, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schindler, P. J. Municipal waste combustion assessment: Combustion control at existing facilities. U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schindler, P. J. Municipal waste combustion assessment: Combustion control at new facilities. U.S. Environmental Protection Agency, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Newhall, J. Waste combustion system analysis: Project summary. U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Newhall, J. Waste combustion system analysis: Project summary. U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Service, Canada Environmental Protection. Decontamination of municipal waste combustion fly ash. Environment Canada, Eco-Technology Innovation Section, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tillman, David A. The combustion ofsolid fuels and wastes. Academic Press, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hallenbeck, William H. Waste-to-energy combustion facilities and materials recycling. University of Illinois at Chicago, Office of Solid Waste Management, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Waste combustion"

1

Velzy, Charles O., and Leonard M. Grillo. "Waste-to-Energy Combustion." In Energy Conversion. CRC Press, 2017. http://dx.doi.org/10.1201/9781315374192-24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rechberger, Helmut. "Incineration: Co-Combustion." In Solid Waste Technology & Management. John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9780470666883.ch31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Su, S., Y. G. Jin, X. X. Yu, and R. Worrall. "Preliminary Experimental Studies of Waste Coal Gasification." In Cleaner Combustion and Sustainable World. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30445-3_99.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dweck, Jo, L. C. Morais, J. C. Meneses, and Pedro M. Büchler. "Thermal Analysis of Municipal Sludge Waste Combustion." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-423-5.740.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Adonyi, Zoltán, and Sándor Kántor. "Incineration of Waste Solvents Containing Chlorinated Hydrocarbons: Some Critical Remarks." In Combustion Efficiency and Air Quality. Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-1827-3_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Praneeth, D. V. S., V. R. Sankar Cheela, and Brajesh Dubey. "Environmental Risk Assessment for Beneficial Reuse of Coal Combustion Residues." In Waste Management and Resource Efficiency. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7290-1_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hattemer-Frey, Holly A., and Curtis C. Travis. "An Overview of Food Chain Impacts from Municipal Waste Combustion." In Municipal Waste Incineration Risk Assessment. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3294-1_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhukov, E. B., E. M. Puzirev, and K. V. Menyaev. "Co-combustion Technology of Coal and Wood Waste." In Clean Coal Technology and Sustainable Development. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-2023-0_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Kai, Bangting Yu, Jian Chang, Honggang Chen, and Yongping Yang. "Dynamic Behavior of Tobacco Waste in the Coal-Fired Fluidized-Bed Boiler." In Cleaner Combustion and Sustainable World. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30445-3_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dam-Johansen, Kim, Flemming J. Frandsen, Peter A. Jensen, and Anker D. Jensen. "Co-firing of Coal with Biomass and Waste in Full-Scale Suspension-Fired Boilers." In Cleaner Combustion and Sustainable World. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30445-3_107.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Waste combustion"

1

Lopez-Ocaña, G., R. G. Bautista-Margulis, J. R. Hernandez-Barajas, H. O. Rubio-Arias, and R. A. Saucedo-Teran. "Combustion of lignocellulosic materials in an experimental fluidized bed system." In WASTE MANAGEMENT 2008. WIT Press, 2008. http://dx.doi.org/10.2495/wm080301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Verdone, N., G. Liuzzo, P. De Filippis, and F. Mazzoni. "Oxygen-enhanced combustion in waste incineration: economic and environmental considerations." In WASTE MANAGEMENT 2008. WIT Press, 2008. http://dx.doi.org/10.2495/wm080321.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Verdone, N., M. Scarsella, G. Liuzzo, and P. De Filippis. "Innovative technique for the control of NOxformed in combustion processes." In WASTE MANAGEMENT 2010. WIT Press, 2010. http://dx.doi.org/10.2495/wm100021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Plavnik, Gene. "Pulse Combustion Technology." In 14th Annual North American Waste-to-Energy Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/nawtec14-3195.

Full text
Abstract:
Pulse combustion has been used in a variety of ways since first being discovered in 1877. This a combustion process that occurs under oscillatory conditions with changing state variables, such as pressure, temperature and velocity. This paper looks at the historic uses of pulse combustion, and it provides an overview of this unique process. Pulse combustion has been used to amplify thrust power with the German V-1 rockets. Pulse combustion has been used to optimize flame efficiencies, and it is now reemerging in many new industrial applications including some for Waste to Energy.
APA, Harvard, Vancouver, ISO, and other styles
5

Torii, Shuichi. "Combustion Phenomenon on Mixture of Waste Fluid and Waste Oil." In 40th Thermophysics Conference. American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-4353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Holtzapple, Mark T., and Frank E. Little. "Comparison of Waste Combustion and Waste Electrolysis: A Systems Analysis." In Intersociety Conference on Environmental Systems. SAE International, 1989. http://dx.doi.org/10.4271/891485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Blasiak, W., and J. von Schéele. "“Flameless” oxyfuel combustion development for process improvement, emission reduction in furnaces and incinerators." In WASTE MANAGEMENT 2006. WIT Press, 2006. http://dx.doi.org/10.2495/wm060271.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Haykiri-Acma, H., and S. Yaman. "Comparison of the combustion behaviours of agricultural wastes under dry air and oxygen." In WASTE MANAGEMENT 2012. WIT Press, 2012. http://dx.doi.org/10.2495/wm120141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yasuda, K., N. Ishikawa, M. Watanabe, Y. Noma, and K. Kawamoto. "Basic research on the formation characteristics of nitrated polycyclic aromatic hydrocarbons in the combustion process." In WASTE MANAGEMENT 2008. WIT Press, 2008. http://dx.doi.org/10.2495/wm080291.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bahillo, Alberto, Lourdes Armesto, Andres Cabanillas, and Juan Otero. "NOx and N2O Emissions During Fluidized Bed Combustion of Leather Wastes." In 17th International Conference on Fluidized Bed Combustion. ASMEDC, 2003. http://dx.doi.org/10.1115/fbc2003-101.

Full text
Abstract:
Transformation of hide (animal skins) into leather is a complicated process during which a significant amounts of wastes are generated. Fluidized bed combustion has been extended to burn different wastes that have problems with their disposal showing its technical feasibility. Considering the characteristics of the leather waste, especially the heating value (12.5–21 MJ/kg), it is a fairly good fuel. Moreover, leather waste has a high volatile matter, 65%, similar to other biomasses and an unusual high nitrogen content, 14%. The first objective of this work is to study the fluidized bed combustion of leather wastes presenting experimental results regarding NOx and N2O emissions. A series of experiments have been carried out in a fluidized bed pilot plant to understand the importance of operating parameters such as furnace temperature, oxygen content in gases, staged combustion and residence time on the NOx and N2O emission level. Despite having high nitrogen content, low conversion of N-fuel to NOx and N2O was measured during the combustion of leather waste in BFB. Bed temperature and oxygen content were found as the most important single parameters on N2O emission and only oxygen content has a significant influence on NOx emission. Leather waste exhibits a great NOx/O2 trend; NOx decreases as the oxygen concentration decreases and the effect of the combustion temperature on NOx is insignificant. Staged combustion does not give a reduction in NOx.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Waste combustion"

1

Netzel, D. A., D. C. Lane, M. A. Brown, K. A. Raska, J. A. Clark, and J. F. Rovani. Organic and inorganic hazardous waste stabilization utilizing fossil fuel combustion waste materials. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10189775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bushnell, D. J., J. H. Canova, and A. Dadkhah-Nikoo. Municipal solid waste combustion: Fuel testing and characterization. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/7076164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jones, C., J. Hahn, B. Magee, et al. Utilization of ash from municipal solid waste combustion. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/757056.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

White, D. M., K. L. Nebel, M. Gundappa, and K. R. Ferry. NO{sub x} control technologies applicable to municipal waste combustion. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/31684.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lindstrom, Joel, and Scott Lux. Multi-fuel combustion technology for water heating with waste oil. Construction Engineering Research Laboratory (U.S.), 2018. http://dx.doi.org/10.21079/11681/30440.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Elcock, D., and N. L. Ranek. Coal combustion waste management at landfills and surface impoundments 1994-2004. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/929226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Greenhalgh, W. O. Combustion and fuel loading characteristics of Hanford Site transuranic solid waste. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10180206.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jones, C. M., R. M. Hartman, D. Kort, and N. Rapues. Utilization of ash from municipal solid waste combustion. Final report, Phase I. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10103676.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ginsberg, T. Assessment of combustion and related issues in the DWPF and ITP waste tanks. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10176016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Banks, G. N., J. K. L. Wong, and H. Whaley. Combustion data for petroleum coke and waste fuel oil for Les Sables OLIMAG Inc. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1992. http://dx.doi.org/10.4095/304530.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Waste combustion' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography