Log in

Relevant bibliographies by topics / Wastes recycling / Journal articles

To see the other types of publications on this topic, follow the link: Wastes recycling.

Journal articles on the topic 'Wastes recycling'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Wastes recycling.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Liang, Qin. "Review and Research on Medical Waste Recycling Network." Academic Journal of Science and Technology 10, no. 1 (2024): 231–34. http://dx.doi.org/10.54097/y080v252.

Full text

Abstract:

The mass production of medical wastes has tested the safety of urban public health, and the recovery and disposal of medical wastes is imminent. Under various environmental backgrounds, such as the sudden increase in the number of medical wastes, the late start of the medical waste recycling industry in China, the low disposal rate, and the improper treatment of medical wastes affecting the environment and personal safety, medical wastes should be managed in a timely and standardized manner, and effective strategies should be put forward to minimize the environmental pollution caused by medica

APA, Harvard, Vancouver, ISO, and other styles

2

Tallapragada, Sridevi, Vandana, Rajesh Lather, and Gurnam Singh. "Recent ways of management and disposal of agricultural waste - A Review." INTERNATIONAL JOURNAL OF AGRICULTURAL SCIENCES 17, no. 2 (2021): 666–73. http://dx.doi.org/10.15740/has/ijas/17.2/666-673.

Full text

Abstract:

With the development of agriculture in India, the production of agricultural wastes increased rapidly. Basically these wastes are bio products and are very important for survival of animals and human beings. The occurrence of agricultural wastes is unique in the different areas. The agricultural straw and livestock excrement are considered to be potential resources. These substances are widely available on earth and can be a good source of energy or be converted into useful products. The wastes generated from crop have a good potential to convert to energy through related energy sector. The wa

APA, Harvard, Vancouver, ISO, and other styles

3

Li, Shu Yuan, Jia Jing Jiang, and Bing Zhang. "Research on Environmental Impact Evaluation and Recycling Systematic Assessment of Plastic Waste in China." Applied Mechanics and Materials 768 (June 2015): 240–48. http://dx.doi.org/10.4028/www.scientific.net/amm.768.240.

Full text

Abstract:

With the increasing of plastic consumption, the recycling of plastic waste has become an important problem with huge environmental impact. In order to analyze the environmental impact of plastic waste recycling, this study presents a systematic evaluation framework for plastic waste’s recycling process in China. Based on the framework, theoretical analysis and experimental research are made to evaluate the relationship of scale volume and environmental impact of plastic waste recycling. Cost and energy consumption of typical processing of plastic wastes have been calculated. And an optimizatio

APA, Harvard, Vancouver, ISO, and other styles

4

Genc, Ayten, Ozgur Zeydan, and Selin Sarac. "Cost analysis of plastic solid waste recycling in an urban district in Turkey." Waste Management & Research 37, no. 9 (2019): 906–13. http://dx.doi.org/10.1177/0734242x19858665.

Full text

Abstract:

The usage of plastics has exponentially increased in our daily lives over the past 50 years because of its durability, low costs and potential for diverse applications, such as widespread use as disposable items. In this study, first, the recycling cost of plastic wastes has been estimated by using actual data taken from a recycling centre, where plastic solid wastes were collected separately. The total amount of plastic wastes recycled at the centre was approximately 695 tonnes. The operating cost of plastics separation at the recycling centre, the transport of plastic wastes, labouring, main

APA, Harvard, Vancouver, ISO, and other styles

5

Li, Yali, Franklin Zambrano, Yuhan Wang, and Ronald Marquez. "How China’s foreign waste ban will reshape the U.S. recycling supply chain: Economic and environmental considerations towards a circular economy oriented paper recycling industry." BioResources 17, no. 2 (2022): 3178–201. http://dx.doi.org/10.15376/biores.17.2.3178-3201.

Full text

Abstract:

Until recently, China was the largest scrap and unsorted waste importer in the world. Chinese industries sorted the imported wastes and recovered plastic, paper, textiles, and metals, using them as raw materials for manufacturing processes. Since 2013, the Chinese government has imposed measures to ban the import of wastes, the latest one being the “National Sword” policy (fully deployed in January 2021), banning the import of unsorted and recycled wastes. As a result, collecting wastes and recyclables and sending them to China is no longer an option; this has drastically affected the recyclin

APA, Harvard, Vancouver, ISO, and other styles

6

Khamaruddin, Putri Faizura Megat, Tiffany Anak Tony, Azil Bahari Alias, Sharifah Aishah Syed A. Kadir, and Emma Qarmilla Suhaili. "Waste Characteristics Study and Recycling Practice Trend at Tuanku Abdul Halim Mu’adzam Shah Engineering Complex, UiTM." Key Engineering Materials 797 (March 2019): 65–73. http://dx.doi.org/10.4028/www.scientific.net/kem.797.65.

Full text

Abstract:

In Malaysia, waste management via recycling is highly promoted, however, recycling bins are not fully utilized as almost all the recycling bins provided are filled with other wastes. As institutional waste is a part of municipal solid waste (MSW), this composition study will be crucial to obtain a conventional management of the waste. In other words, waste composition studies are vital for a more effective and proper management of the waste generated. Hence, the objectives of the research are to analyse the trend of the recycle waste composition obtained during both semester session and semest

APA, Harvard, Vancouver, ISO, and other styles

7

Jin, Yanming, Zhuonan Li, Xinli Xiao, Conggan Ma, Min Liu, and Lingyu Chen. "Research on the evaluation method of the business model for the recycling of hazardous waste in power grid." Advances in Engineering Technology Research 1, no. 1 (2022): 241. http://dx.doi.org/10.56028/aetr.1.1.241.

Full text

Abstract:

Hazardous wastes in power grids include waste transformer oil and waste lead-acid batteries, etc. Due to the problems of extremely large number of points, wide distribution, and small number of units, coupled with differences in hazardous waste recycling technologies, policies, and markets in various regions, so Possible business models need to be listed and evaluated. This paper establishes an evaluation index system for the business model of hazardous waste recycling, and uses the TOPSIS method to evaluate five feasible business models. The evaluation results will help relevant departments o

APA, Harvard, Vancouver, ISO, and other styles

8

Murat Çetin,, Murat Çetin,, and Oğuz Kürşat Demirci Oğuz Kürşat Demirci. "Polluting Effects of Wastes Generated in Engine Vehicle Repair-Service Businesses, Storage, Disposal and Reuse of Wastes." Journal of Research in Environmental and Earth Sciences 10, no. 12 (2024): 59–65. https://doi.org/10.35629/2532-10125965.

Full text

Abstract:

Motor vehicle production is one of the sectors that show technological development depending on science and technology. Vehicle maintenance stations and auto repair shops that develop as a result of motor vehicle production are a sectoral occupational field that contributes greatly to employment. Waste materials are produced as a result of production processes, industrial and domestic solid wastes. Especially considering the environmental pollution effects of wastes originating from the motor vehicle repair sector, it is important to take more care because they are much more harmful than domes

APA, Harvard, Vancouver, ISO, and other styles

9

János, Sója, and Miskolczi Norbert. "Recycling of ELV Waste Plastics by One-Stage and a Two-Stage Thermo-Catalytic Pyrolysis." CHEMICAL ENGINEERING TRANSACTIONS 61 (September 19, 2017): 1909–14. https://doi.org/10.3303/CET1761316.

Full text

Abstract:

Due to the significant increasing in motorization, the long term sustainable utilization of End-of-Life Vehicles (ELV) wastes is in the focus of the waste management. In the European Union annually 8-9 Mt of ELV waste should be utilized. ELV contains mainly metals but its 15 - 20 % is plastics or rubber. According to the 2000/53/EC directive, from 1 January 2015, 95 % of the waste from vehicles have to be utilized; 85 % of the wastes by mechanical recycling and 10 % of the wastes by chemical recycling. The chemical recycling results valuable products from ELV plastic wastes, such as fuels, oil

APA, Harvard, Vancouver, ISO, and other styles

10

Paola Luda, Maria. "Rubber Wastes Management And Recycling." Research and Development in Polymer Science (RDPS) 2, no. 1 (2023): 1–2. http://dx.doi.org/10.54026/rdps/1005.

Full text

Abstract:

Rubber is widely used in automotive industry, mainly for tires, and in non-automotive industries producing a wide amount of waste to be properly managed and collected. Waste management schemes exist only for few rubber wastes streams, the majority of which being left to the private initiative of manufacturing or importing enterprises. Recycling approaches currently in use are reviewed for the different rubber waste streams.

APA, Harvard, Vancouver, ISO, and other styles

11

Türkten, Hatice. "Impact of Revenue Generated via Composting and Recycling of Wastes Produced in the Greenhouse Tomato Supply Chain on Reducing Income Inequality: A Case Study of Türkiye." Sustainability 15, no. 18 (2023): 13801. http://dx.doi.org/10.3390/su151813801.

Full text

Abstract:

Investigating the potential impacts of composting and recycling wastes on income distribution is crucial to promote a fairer and more sustainable fresh tomato supply chain (FTSC). Therefore, this study aims to explore the potential of generating extra income from recycling of tomatoes waste generated along the FTSC, and to analyze the impact of that extra income on reducing income inequality among the FTSC actors. Data were collected from 136 greenhouse tomato producers, 60 wholesalers, 18 exporters, 120 domestic retailers, 22 overseas retailers, and 3 recycling facilities in Türkiye. Marketin

APA, Harvard, Vancouver, ISO, and other styles

12

Pashayan, А. А., and D. А. Karmanov. "Recycling of Electroplating Wastes without Formation of Galvanic Sludges." Ecology and Industry of Russia 22, no. 12 (2018): 19–21. http://dx.doi.org/10.18412/1816-0395-2018-12-19-21.

Full text

Abstract:

The reasons and eco-economic consequences of galvanic sludge accumulation in environment have been considered. The economic futility of recycling of galvanic sludges has been shown. It has been established that recycling of chrome-containing wastes together with waste pickle liquors of steel-rolling mills enables to fully regenerate all components of the above wastes without sludge formation. The chemical processes for regenerative recycling of spent alkaline copper solutions of all kinds have been described. Deacidification of some acid electroplating wastes permits to extract oxides of nonfe

APA, Harvard, Vancouver, ISO, and other styles

13

Kabir, MH, M. Ismail, and M. Jashimuddin. "Status of Solid Waste Recycling at Sholokbahar Ward in Chittagong, Bangladesh." Journal of Environmental Science and Natural Resources 6, no. 2 (2015): 7–11. http://dx.doi.org/10.3329/jesnr.v6i2.22078.

Full text

Abstract:

The study was conducted to analyze the solid waste recycling at Sholokbahar Ward of Chittagong City Corporation. Data were collected from primary waste collectors, i.e.Tokai, Feriwala, and Women waste collectors, waste dealers and different recycling plants through questionnaire survey and frequent field visits. The study found that the average amount of collected recyclable solid wastes was 121.37 kg/day in each solid waste recycling shop while waste picker was about 16 kg/day. Interestingly, the amount of average collected solid waste per day by Feriwala was significantly higher than Tokai a

APA, Harvard, Vancouver, ISO, and other styles

14

Jones, Hannah, Florence Saffar, Vasileios Koutsos, and Dipa Ray. "Polyolefins and Polyethylene Terephthalate Package Wastes: Recycling and Use in Composites." Energies 14, no. 21 (2021): 7306. http://dx.doi.org/10.3390/en14217306.

Full text

Abstract:

Plastics are versatile materials used in a variety of sectors that have seen a rapid increase in their global production. Millions of tonnes of plastic wastes are generated each year, which puts pressure on plastic waste management methods to prevent their accumulation within the environment. Recycling is an attractive disposal method and aids the initiative of a circular plastic economy, but recycling still has challenges to overcome. This review starts with an overview of the current European recycling strategies for solid plastic waste and the challenges faced. Emphasis lies on the recyclin

APA, Harvard, Vancouver, ISO, and other styles

15

Yang, Yan Mei, and Shi Qiang Wei. "A Recycling Review of Construction Waste in China's Road Construction Industry." Advanced Materials Research 433-440 (January 2012): 1945–49. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.1945.

Full text

Abstract:

Many kinds of construction wastes are now produced in China. Recycling disposal of construction wastes not only alleviate pressure on the environment but also identify certain economic and social benefits. This paper undertakes a timely review of recycling disposal of construction waste in China's Road Construction Industry. The paper presented definitions of construction wastes and described the current situation of construction wastes in China. Considering the research findings which have been achieved in the field of waste disposal, this paper discussed the approaches to recycle constructio

APA, Harvard, Vancouver, ISO, and other styles

16

Eşkin Uzun, Seniye, Volkan Enç, and Fatih Hoşoğlu. "Atık Kompozit İçecek Kartonları Geri Dönüşüm Yöntemleri /." Journal of History Culture and Art Research 1, no. 4 (2013): 345. http://dx.doi.org/10.7596/taksad.v1i4.60.

Full text

Abstract:

Kağıt, plastik ve alüminyum malzeme katmanlarından oluşan kompozit kartonlar özellikle sıvı gıdaların muhafazası için tercih edilen bir ambalaj türüdür. İlk olarak süt için tasarlanan ve geliştirilen kompozit kartonlar, günümüzde sütün yanı sıra pek çok gıda ve içeceğin ambalajlanmasında yaygın olarak kullanılmaktadır. Kullanım sürecini tamamladıktan sonra atık halini alan kompozit içecek kartonlarının geri dönüşümünde ise ciddi sıkıntılar bulunmaktadır. Özellikle ülkemizde bu tür atıkların geri dönüşümünün sağlanması sınırlı olarak yapılmakta, bu atıkların büyük bir kısmı depolama alanlarına

APA, Harvard, Vancouver, ISO, and other styles

17

TAŞDELEN EREN, Eda, and Yeşim DEDE SAĞSÖZ. "INVESTIGATION OF BORON WASTE RECYCLING APPLICATIONS." INTERNATIONAL REFEREED JOURNAL OF ENGINEERING AND SCIENCES, no. 19 (2023): 36–53. http://dx.doi.org/10.17366/uhmfd.2023.19.4.

Full text

Abstract:

Aim: The element boron, discovered in 1808, has many properties and can be used in glass, detergent, pharmaceutical, chemical industry, fire retardant production, agriculture, ceramic metallurgy, energy storage, water treatment, pigment and dryer, car interior airbags, hydraulic brake. It draws attention with its diversity of usage areas. During the production and processing of boron mineral, waste product is also produced in addition to boron. For this purpose, scientists carried out activities for the evaluation of boron waste. They have tried methods that can provide the use of boron wastes

APA, Harvard, Vancouver, ISO, and other styles

18

Horris, K. Nangulama. "Analysis of Abandoned Mine Wastes Disposal Techniques in Malawi: A Concept of Circular Economy." Engineering and Technology Quarterly Reviews 4, no. 2 (2021): 1–9. https://doi.org/10.5281/zenodo.5514942.

Full text

Abstract:

Non-operational mines mostly constitute of significant quantities of valuable mineral resources within tailings and waste rock that can be disposed properly using innovative techniques. Proper waste disposal techniques do not only reduce the need for new mines to be developed but also have broad beneficial results on mining environmental impact. This paper presents a solution on abandoned mine wastes in Malawi. Malawi government wants to embrace techniques on former mine waste recycling operations that incentivize investment. Thus, this analysis proposes abandoned mine waste recycling techniqu

APA, Harvard, Vancouver, ISO, and other styles

19

Niu, Ling Juan, and Na Na Zhao. "Recycling Business of Municipal Solid Wastes in China." Advanced Materials Research 878 (January 2014): 504–10. http://dx.doi.org/10.4028/www.scientific.net/amr.878.504.

Full text

Abstract:

Municipal solid waste is a big problem in China. Separating and collecting recyclables from municipal solid wastes is a key approach for resolving waste problems and promoting circular economy. The current collection and recycling of recyclables from municipal solid waste is reviewed for better perspective. The material and value stream are summarized for understanding the potential direction of waste and recyclables. The stakeholder for recyclables collection and recycling is identified and their roles are analyzed. Situation of recycling enterprises is introduced. Finally, some comments for

APA, Harvard, Vancouver, ISO, and other styles

20

N, Menad. "Recycling of Electric and Electronic Wastes Nowadays." Open Access Journal of Waste Management & Xenobiotics 3, no. 1 (2020): 1–2. http://dx.doi.org/10.23880/oajwx-16000135.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Yan, Fang, Guang Xue Chen, Ke Yong Zhu, and Rui Ling Yao. "Research on Recycling and Utilization of Waste Ink." Advanced Materials Research 800 (September 2013): 67–71. http://dx.doi.org/10.4028/www.scientific.net/amr.800.67.

Full text

Abstract:

With the development of printing industry, more and more waste ink appears. Currently, most wastes were dealt with by incineration or landfill, which brought great pollutions to the environment. Based upon co-boiling distillation, grinding, and toning, a method can convert waste ink into black for reuse, which reduces environmental pollutions from wastes.

APA, Harvard, Vancouver, ISO, and other styles

22

Rouhi, Broujeni B., G. A. Omrani, R. Naghavi, and S. S. Afraseyabi. "Construction and Demolition Waste Management (Tehran Case Study)." Engineering, Technology & Applied Science Research 6, no. 6 (2016): 1249–52. https://doi.org/10.5281/zenodo.225510.

Full text

Abstract:

Increasing building construction raises concerns about construction and demolition (C&D) waste management. To assess this issue the building components, the collection schemes, their recycling and disposal should be investigated. In order to manage C&D wastes, paying attention to how this kind of wastes is disposed is imperative for their correct identification. Inattention, lack of organization and proper transport and sanitary disposal of construction and demolition waste lead to problems such as accumulation of construction waste in the streets. However, more than 90 percent of the

APA, Harvard, Vancouver, ISO, and other styles

23

Nhu, Dung Kim Thi, Duoc Van Tran, Thuat Tien Phung, and Toi Trung Tran. "An overview of recycling methods from composite wastes." Journal of Mining and Earth Sciences 62, no. 3b (2021): 69–79. http://dx.doi.org/10.46326/jmes.2021.62(3b).08.

Full text

Abstract:

In the era of industrialization and modernization, pollution caused by industrial wastes has become one of the biggest challenges most countries are facing. Wastes such as plastics, ceramics, paper, metals, composite, etc. are the predominant detriments to the environment. Although composite materials account for just a small proportion in the waste stream, they are difficult to process and possess a great number of potential risks to the environment. At the same time, recycling and recovering composite waste materials are more challenging than other easy-to-handle waste materials. This paper

APA, Harvard, Vancouver, ISO, and other styles

24

Cheung, Tsz Yan, Lincoln Fok, Chi-Chiu Cheang, Chi Ho Yeung, Wing-Mui Winnie So, and Cheuk-Fai Chow. "University halls plastics recycling: a blended intervention study." International Journal of Sustainability in Higher Education 19, no. 6 (2018): 1038–52. http://dx.doi.org/10.1108/ijshe-10-2017-0175.

Full text

Abstract:

Purpose The problem of plastic wastes is serious nowadays worldwide, although plastic wastes recycling is already in practice. To promote sustainability in plastic waste recycling, the quality of wastes collected should be maintained well, resulted from a good recycling practice. This paper aims to study a new plastic recycling bin (PRB) and poster interventions on the enhancement of university hall residential students’ proenvironmental knowledge, attitudes and intended behaviours (KAB) and actual recycling behaviours; informative and feedback posters were used as interventions. Design/method

APA, Harvard, Vancouver, ISO, and other styles

25

Bhandari, Netra Lal, Sulakshana Bhattarai, Ganesh Bhandari, Sumita Subedi, and Kedar Nath Dhakal. "A Review on Current Practices of Plastics Waste Management and Future Prospects." Journal of Institute of Science and Technology 26, no. 1 (2021): 107–18. http://dx.doi.org/10.3126/jist.v26i1.37837.

Full text

Abstract:

Inefficient solid waste management of plastics and polymeric materials is one of the global challenges leading to environmental deterioration. This challenge has brought alarming concern to minimize volume of such wastes released into the environment. The concern proposes a solution to the existing problems to some extent by reuse, recycling, and efficient conversion of waste materials into alternative application. Chemical and thermo-mechanical conversion of plastic wastes into energy and their biodegradation were taken into account. Consequently, some newly employed recycling and conversion

APA, Harvard, Vancouver, ISO, and other styles

26

Bhat, Sartaj Ahmad, Jaswinder Singh, and Adarsh Pal Vig. "Management of Sugar Industrial Wastes through Vermitechnology." International Letters of Natural Sciences 55 (June 2016): 35–43. http://dx.doi.org/10.18052/www.scipress.com/ilns.55.35.

Full text

Abstract:

The present paper discusses the role of earthworms in recycling of sugar industrial wastes. The wastes generated from sugar industry are pressmud, bagasse, bagasse fly ash, sugar cane trash, sugar beet mud, sugar beet pulp, molasses etc. These wastes when mixed with other organic substrates become ideal mixtures for growth of earthworms. These wastes if stored in open field’s causes contamination in the environment and may cause several diseases in public health. But the governments have been unable to tackle the menace of solid waste pollution due to dearth of appropriate technologies, financ

APA, Harvard, Vancouver, ISO, and other styles

27

Bhat, Sartaj Ahmad, Jaswinder Singh, and Adarsh Pal Vig. "Management of Sugar Industrial Wastes through Vermitechnology." International Letters of Natural Sciences 55 (June 3, 2016): 35–43. http://dx.doi.org/10.56431/p-jh3zmh.

Full text

Abstract:

The present paper discusses the role of earthworms in recycling of sugar industrial wastes. The wastes generated from sugar industry are pressmud, bagasse, bagasse fly ash, sugar cane trash, sugar beet mud, sugar beet pulp, molasses etc. These wastes when mixed with other organic substrates become ideal mixtures for growth of earthworms. These wastes if stored in open field’s causes contamination in the environment and may cause several diseases in public health. But the governments have been unable to tackle the menace of solid waste pollution due to dearth of appropriate technologies, financ

APA, Harvard, Vancouver, ISO, and other styles

28

Andriamanalina, Toavina M., Martial D. Andrianandrasana, Christine Ravonizafy, and Edouard R. Andrianandrasana. "Calcium Salts from the Demineralization of Crab (Scylla serrata) Wastes." American Journal of Innovation in Science and Engineering 2, no. 1 (2023): 25–29. http://dx.doi.org/10.54536/ajise.v2i1.1273.

Full text

Abstract:

Seafood wastes raise environmental concerns and many studies focus on recycling those wastes into chitosan. However, the environmental impact of that process is underestimated. Indeed, a significant amount of toxic wastes is released, potentially harmful to humans and the environment. This study therefore focuses on reducing of that adverse impact by recycling the waste produced during the first step of the production of chitosan: demineralization. By varying the concentration of the acid while keeping stoichiometric ratios, it was shown that the concentration plays a vital role in the efficie

APA, Harvard, Vancouver, ISO, and other styles

29

Andriamanalina, Toavina M., Martial D. Andrianandrasana, Christine Ravonizafy, and Edouard R. Andrianarison. "Calcium Salts from the Demineralization of Crab (Scylla serrata) Wastes." American Journal of Innovation in Science and Engineering 2, no. 1 (2023): 25–29. https://doi.org/10.54536/ajise.v2i1.1273.

Full text

Abstract:

Seafood wastes raise environmental concerns and many studies focus on recycling those wastes into chitosan. However, the environmental impact of that process is underestimated. Indeed, a significant amount of toxic wastes is released, potentially harmful to humans and the environment. This study therefore focuses on reducing of that adverse impact by recycling the waste produced during the first step of the production of chitosan: demineralization. By varying the concentration of the acid while keeping stoichiometric ratios, it was shown that the concentration plays a vital role in the efficie

APA, Harvard, Vancouver, ISO, and other styles

30

Haarstad, Ketil, and John Bavor. "Phosphorus Recycling from Wastes." Journal of Environmental Protection 08, no. 08 (2017): 831–43. http://dx.doi.org/10.4236/jep.2017.88052.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

A. Zhunusov, A. Kenzhebekova, and A. Zhunusova. "RECYCLING OF METALLURGICAL WASTES." Science and Technology of Kazakhstan, no. 4.2021 (December 27, 2021): 59–66. http://dx.doi.org/10.48081/fizv7488.

Full text

Abstract:

This article presents the results of a research on the recycling of wastes from metallurgical plants in the city of Pavlodar at a steel smelting plant KSP Steel. The pellets were produced with aspiration dust and mixed with steelmaking (white) slag, ferrous sand, scale. The produced pellets were fired at a temperature of 600 ° C. The experience with the use of 20% white slag, 20% ferrous sand mixed with aspiration dust and 10% mill scale shows, after burning in a furnace, quite satisfactory strength, which is 80 kg / pellet. The principal possibility of steelmaking using pellets is shown. A po

APA, Harvard, Vancouver, ISO, and other styles

32

KIMURA, TERUO. "Recycling of Fiber Wastes." FIBER 65, no. 5 (2009): P.142—P.145. http://dx.doi.org/10.2115/fiber.65.p_142.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Sadat-Shojai, Mehdi, and Gholam-Reza Bakhshandeh. "Recycling of PVC wastes." Polymer Degradation and Stability 96, no. 4 (2011): 404–15. http://dx.doi.org/10.1016/j.polymdegradstab.2010.12.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Ibraev, I. K., O. T. Ibraeva, and M. M. Suyundikov. "Recycling chromium-bearing wastes." Metallurgist 56, no. 9-10 (2013): 727–30. http://dx.doi.org/10.1007/s11015-013-9642-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Islam, M. S., A. Sultana, M. Rasheduzzaman, G. K. Kundu, A. K. I. Kamal, and M. K. Uddin. "Assessment of the Present State and Economical Prospects of Solid Waste at Amin Bazar Waste Dumping Site, Dhaka, Bangladesh." Journal of Scientific Research 7, no. 3 (2015): 129–37. http://dx.doi.org/10.3329/jsr.v7i3.23415.

Full text

Abstract:

The study was conducted to explore the current status and the economical prospect of the solid waste management at Amin Bazar waste dumping site, Dhaka. A total of 48 waste samples were collected in both dry and wet season to study the physical composition, pH and moisture content of discarded wastes. The wastes were comprised of plastics (6%), paper (3.5%), glass (0.23%), garden waste (8.5%), food stuffs (72.25%), metals (0.16%) and textile products (3.25%). The pH values of the samples were ranges between 6.9-7.8 indicated the neutral condition. Larger portion of the wastes was organic (72%)

APA, Harvard, Vancouver, ISO, and other styles

36

Bok, Young Jin, Sung Ho Tae, and Rakh Yun Kim. "Analysis of CO₂ Emission in the Waste Disposal Process Based on Computation of Construction Waste." Advanced Materials Research 1025-1026 (September 2014): 1079–82. http://dx.doi.org/10.4028/www.scientific.net/amr.1025-1026.1079.

Full text

Abstract:

The purpose of this study is to analyze CO2 emission based on computation of construction waste which occurs during new constructions. To accomplish the purpose, Basic unit data of existing construction wastes was analyzed and basic unit of construction wastes generated during new constructions was proposed. In addition, basic unit of CO2 in the disposal process of construction waste established as the national LCI DB of Korea was applied to analyze CO2 emission during the disposal process of waste (landfill, incineration, recycling) generated during new constructions. As a result, flammable m

APA, Harvard, Vancouver, ISO, and other styles

37

Dyganova, Roza, and Alena Gordeeva. "Greening by grain waste recycling in cereal industry." E3S Web of Conferences 161 (2020): 01098. http://dx.doi.org/10.1051/e3sconf/202016101098.

Full text

Abstract:

Ecologically feasible ways of cereal wastes recycling are considered and their comparative analysis is carried out. The description of granulation methods for waste is especially investigated and the most effective technical solution for the studied elevator is proposed. Grain wastes of category III are not suitable for cattle and poultry feeding, therefore, they are stored in the territories adjacent to a grain processing enterprise for a certain time, and then they are taken to the landfill or burnt. The wastes include the wastes from the process of grain cleaning with the grain content of n

APA, Harvard, Vancouver, ISO, and other styles

38

Bai, Xiao-ping, and Xiu-weng Wang. "A Novel Planning Method of Urban Building Wastes for Environment Protection and Sustainable Development." SAGE Open 10, no. 4 (2020): 215824402095126. http://dx.doi.org/10.1177/2158244020951269.

Full text

Abstract:

The building construction wastes seriously polluted the environment; building construction wastes and the recycling of green packaging materials are the important link of environment protection and sustainable development. The building construction wastes have complicated composition. Some of them can be recycled by simply sorting, but most urban building construction wastes require special separation or reprocessing. Therefore, building an efficient and practical building construction wastes multilevel utilization recycling system to resolve the recycling problems of building construction was

APA, Harvard, Vancouver, ISO, and other styles

39

Karuppannan Gopalraj, Sankar, Ivan Deviatkin, Mika Horttanainen, and Timo Kärki. "Life Cycle Assessment of a Thermal Recycling Process as an Alternative to Existing CFRP and GFRP Composite Wastes Management Options." Polymers 13, no. 24 (2021): 4430. http://dx.doi.org/10.3390/polym13244430.

Full text

Abstract:

There are forecasts for the exponential increase in the generation of carbon fibre-reinforced polymer (CFRP) and glass fibre-reinforced polymer (GFRP) composite wastes containing valuable carbon and glass fibres. The recent adoption of these composites in wind turbines and aeroplanes has increased the amount of end-of-life waste from these applications. By adequately closing the life cycle loop, these enormous volumes of waste can partly satisfy the global demand for their virgin counterparts. Therefore, there is a need to properly dispose these composite wastes, with material recovery being t

APA, Harvard, Vancouver, ISO, and other styles

40

Tran, Toi Trung, Chinh Thi Vu, and Nhung Thi Pham. "Technologies for metal recycling from electrical - electronic wastes." Journal of Mining and Earth Sciences 62, no. 3b (2021): 58–68. http://dx.doi.org/10.46326/jmes.2021.62(3b).07.

Full text

Abstract:

Wastes from electrical - electronic equipment (WEEE) are of huge concerns worldwide. With the decreasing life cycle of most electrical - electronic equipment (EEE), the WEEE growth rate is fast, about 3÷5% annually. This is considered as the fastest growing waste stream among municipal wastes. WEEE contains, in addition to plastic, glass etc., high contents of base metals and precious metals. They are regarded as potential secondary resources of metals in addition to primary resources of metals from metallic ores. Over the past decades, many metal recycling technologies from WEEE have been dev

APA, Harvard, Vancouver, ISO, and other styles

41

Ridzuan, Mohd Rozaimy, Noor Amira Syazwani Abd Rahman, Nur Syafiqah Hussin, and Naqiah Awang. "RECYCLING ENDEAVOURS AMONG THE P.P.R RESIDENTS IN KUALA LUMPUR: A QUALITATIVE APPROACH." Malaysian Journal of Sustainable Environment 3, no. 2 (2017): 117. http://dx.doi.org/10.24191/myse.v3i2.5599.

Full text

Abstract:

The involvement of households in the recycling activity in the last decade has been perceived as an effective way to reduce the amount of solid wastes in the landfill areas as well as to reuse the materials. The recycling practice among the public is very crucial in order to reduce the problem of overwhelming landfills and energy. The ever-increasing flow of household waste is an enormous environmental problem in many countries. By looking at the tremendous amount of solid wastes, Malaysia needs public participation in solid waste management by recycling the unused materials. Thus, the present

APA, Harvard, Vancouver, ISO, and other styles

42

Al-Zubaidi, Aseel B. "Recycling waste papers in green cement mortars." Iraqi Journal of Physics (IJP) 17, no. 40 (2019): 135–44. http://dx.doi.org/10.30723/ijp.v17i40.414.

Full text

Abstract:

This work investigates the utilization of waste papers (natural and industrial) i.e (citrus aurantium and papers A4) mortars containing specified contents 0.5%, 1%, 1.5% of waste papers were prepared and cured. Mechanical characteristics such as compressive and bending strengths, hardness and water absorption were determined for the mortars mixed with the waste papers and compared with those obtained from the pure mortars. Results showed that the addition of waste paper leads to increase the hardness to (69 - 68.5) shore D for (natural and industrial) wastes materials respectively comparing wi

APA, Harvard, Vancouver, ISO, and other styles

43

Mishra, Srabani, Sandeep Panda, Ata Akcil, Seydou Dembele, and Ismail Agcasulu. "A Review on Chemical versus Microbial Leaching of Electronic Wastes with Emphasis on Base Metals Dissolution." Minerals 11, no. 11 (2021): 1255. http://dx.doi.org/10.3390/min11111255.

Full text

Abstract:

There is a growing interest in electronic wastes (e-wastes) recycling for metal recovery because the fast depletion of worldwide reserves for primary resources is gradually becoming a matter of concern. E-wastes contain metals with a concentration higher than that present in the primary ores, which renders them as an apt resource for metal recovery. Owing to such aspects, research is progressing well to address several issues related to e-waste recycling for metal recovery through both chemical and biological routes. Base metals, for example, Cu, Ni, Zn, Al, etc., can be easily leached out thr

APA, Harvard, Vancouver, ISO, and other styles

44

Ding, Qian, and Heping Zhu. "The Key to Solving Plastic Packaging Wastes: Design for Recycling and Recycling Technology." Polymers 15, no. 6 (2023): 1485. http://dx.doi.org/10.3390/polym15061485.

Full text

Abstract:

Confronted with serious environmental problems caused by the growing mountains of plastic packaging waste, the prevention and control of plastic waste has become a major concern for most countries. In addition to the recycling of plastic wastes, design for recycling can effectively prevent plastic packaging from turning into solid waste at the source. The reasons are that the design for recycling can extend the life cycle of plastic packaging and increase the recycling values of plastic waste; moreover, recycling technologies are helpful for improving the properties of recycled plastics and ex

APA, Harvard, Vancouver, ISO, and other styles

45

Patil, Viraj. "Design & Development of Multipurpose Waste Recycling Equipment." International Journal for Research in Applied Science and Engineering Technology 12, no. 5 (2024): 5390–99. http://dx.doi.org/10.22214/ijraset.2024.62797.

Full text

Abstract:

Abstract: The challenge of disposal and handling of solid waste is still one of the major problems in modern societies even though significant efforts are taken towards reduce, reuse, and recycling of waste. Large amounts of solid waste are getting piled up every day in almost every city across globe which is incrementing the amounts of pollution. Hence to cope up to this problem various reforms are being taken Multipurpose waste recycling unit majorly processes three types of waste that is fabrics, plastic and biodegradable/agricultural wastes in an efficient manner. Plastic is one of the maj

APA, Harvard, Vancouver, ISO, and other styles

46

Munir, Qaisar, Sanaz Afshariantorghabeh, and Timo Kärki. "Industrial Waste Pretreatment Approach for 3D Printing of Sustainable Building Materials." Urban Science 6, no. 3 (2022): 50. http://dx.doi.org/10.3390/urbansci6030050.

Full text

Abstract:

The large volume of industrial by-products and wastes from the construction, timber and paper industries has become a serious challenge worldwide. Recycling these industrial wastes as functional materials in the construction industry is an efficient approach for sustainable development. This study presents a pretreatment approach for recycling construction and demolition waste (CDW) and industrial side-streams (such as green liquor sludge, fiber waste, flotation sand and fly ash) in order to produce a geopolymer for the 3D printing of construction materials. A treatment approach was developed

APA, Harvard, Vancouver, ISO, and other styles

47

Goncharova, A. O., and S. D. Burlaka. "ANALYSIS OF THE PROBLEM OF OIL SLUDGE UTILIZATION AND PROCESSING." Chronos 7, no. 9(71) (2022): 64–65. http://dx.doi.org/10.52013/2658-7556-71-9-12.

Full text

Abstract:

The problem of recycling and recycling of industrial waste is very relevant at the present time. A large amount of land resources is being alienated for waste storage. Many wastes contain pollutants that are dangerous to the environment and humans. A reasonable approach to the use of modern methods of recycling secondary waste, their combination will bring us closer to solving this complex problem. The article discusses the current problems of recycling and recycling of waste from the petrochemical industry. The main tasks that enterprises need to implement in order to successfully solve the p

APA, Harvard, Vancouver, ISO, and other styles

48

Choi, Hyeong-Jin, Yong Choi, and Seung-Whee Rhee. "A new concept of advanced management of hazardous waste in the Republic of Korea." Waste Management & Research 37, no. 11 (2019): 1153–60. http://dx.doi.org/10.1177/0734242x19865337.

Full text

Abstract:

In order to activate the recycling of hazardous wastes, the hazardous characteristics of wastes should be removed or stabilized. However, most recyclers in recycling companies do not understand how to remove the hazardous characteristics in wastes with the proper technology. The aim of a new form of advanced management of hazardous waste is to inform recyclers and operators in industries about hazardous characteristics and the treatment methods required for all management processes, from waste generation to final treatment. In a new method of advanced management of hazardous wastes, chemicals

APA, Harvard, Vancouver, ISO, and other styles

49

Hong, Soo-Yeon, Cheol-Woo Yoon, Young-Sam Yoon, Jang-Hyun Kang, and Tae-Wan Jeon. "A Study on Safety Management Plan for Recycling of Medium-Contact Wastes via Ecotoxicity Assessment." Environmental Health Insights 16 (January 2022): 117863022211118. http://dx.doi.org/10.1177/11786302221111872.

Full text

Abstract:

In South Korea, hazardous characteristics of wastes to be recycled are managed through the “Environmental Impact Assessment of Recycling” system. The ecotoxicity of medium-contact recyclable wastes, that is, those in contact with soil, groundwater, surface water, etc., is managed according to this system and is determined based on whether or not they exceed an ecotoxicity value (TU) of 2.0. The ecotoxicity of wastes is tested and determined by using pretreated eluate samples according to the Official Wastes Test Standard and applying the Official Water Pollution Process Test Standard. However,

APA, Harvard, Vancouver, ISO, and other styles

50

Shakil, Nurul Syifaa Mohd, Nur Azirah Zahida Mohamad Azhar, and Norashida Othman. "Solid Waste Management in Malaysia: An overview." Information Management and Business Review 15, no. 1(I)SI (2023): 86–93. http://dx.doi.org/10.22610/imbr.v15i1(i)si.3410.

Full text

Abstract:

Malaysia is heavily dependent on landfilling as a method of waste disposal, and as a result, severe space constraints, health issues, and environmental issues will eventually affect the country. This essay aims to give a general overview of solid waste recycling in Malaysia at the level that affects a community or country the most, the family. In Malaysia, households are the main producers of municipal solid waste, with recyclable materials making up between 70 and 80 percent of the total waste found in landfills. To improve solid waste management from a recycling perspective, it is important

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!