Relevant bibliographies by topics / Water based drilling fluid

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Water based drilling fluid'

Author: Grafiati
Published: 5 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Water based drilling fluid.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Water based drilling fluid"

1

Yue, Qian Sheng, Qing Zhi Yang, Shu Jie Liu, Bao Sheng He, and You Lin Hu. "Rheological Properties of Water Based Drilling Fluid in Deep Water Drilling Conditions." Applied Mechanics and Materials 318 (May 2013): 507–12. http://dx.doi.org/10.4028/www.scientific.net/amm.318.507.

Full text
Abstract:
The rheological property of the drilling fluid was one of the focus problems in deep-water drilling, which was widely concerned. In the article, the viscosity-temperature properties of commonly used water soluble polymeric solution, polymeric brine solution, bentonite slurry, polyacrylamide-potassium chloride drilling fluid with different densities and water-base drilling fluid systems commonly used for China offshore well drillings were studied. 4°C-to-20°C viscosity ratio and 4°C-to-20°C YP ratio were used to judge the thickening level of drilling fluids due to low temperature. The experimen
APA, Harvard, Vancouver, ISO, and other styles
2

Yalman, Emine, Gabriella Federer-Kovacs, and Tolga Depci. "Development of Water-Based Drilling Fluid in Mitigation of Differential Sticking Tendency." Rudarsko-geološko-naftni zbornik 38, no. 2 (2022): 13–21. http://dx.doi.org/10.17794/rgn.2022.2.2.

Full text
Abstract:
The objective of the study is to design a drilling fluid that prevents differential pressure pipe sticking tendency caused by drilling fluid with fly ash that is an industrial waste generated from the combustion of coal. To this end, drilling fluid samples were prepared with different particle sizes obtained through the sieving and grinding process and increasing concentrations of fly ash. Differential pipe sticking tests of the samples were performed by applying 3.447 MPa (500 psi) pressure and using a Fann Model 21150 Differential Sticking Tester in order to determine how the coefficient of
APA, Harvard, Vancouver, ISO, and other styles
3

Momeni, Ali, Seyyed Shahab Tabatabaee Moradi, and Seyyed Alireza Tabatabaei-Nejad. "A REVIEW ON GLYCEROL-BASED DRILLING FLUIDS AND GLYCERINE AS A DRILLING FLUID ADDITIVE." Rudarsko-geološko-naftni zbornik 39, no. 1 (2024): 87–99. http://dx.doi.org/10.17794/rgn.2024.1.8.

Full text
Abstract:
A significant increase of energy demands all over the world and production decline from available oil and gas reservoirs have led the industry to invest in major offshore petroleum resources. However, drilling operations in offshore environments are usually restricted by environmental constraints. Therefore, recent studies are devoted to the development of environmentally compatible fluids with adequate technical properties. Glycerine is a non-toxic, lubricating, colorless, odorless substance with a higher density than water. Due to the properties of glycerine, it can be used as the base of dr
APA, Harvard, Vancouver, ISO, and other styles
4

Yalman, Emine, Tolga Depci, Gabriella Federer-Kovacs, and Hani Al Khalaf. "A new eco-friendly and low cost additive in water based drilling fluids." Rudarsko-geološko-naftni zbornik 36, no. 5 (2021): 1–12. http://dx.doi.org/10.17794/rgn.2021.5.1.

Full text
Abstract:
This study investigates the possibility of using rice husk ash as an additive to develop an environmentally friendly and low-cost drilling fluid system. The rice husk ash was added as an additive to water-based bentonite drilling fluids at different concentrations ranging from 2 wt% to 15 wt%. Rheological and filtration properties of each drilling fluid developed were measured by using a viscometer and standard low-pressure low-temperature filter press. Subsequently, cutting carrying index, minimum annulus velocity required to clean bottom of the well efficiently, flow behaviour index and perm
APA, Harvard, Vancouver, ISO, and other styles
5

Feneuil, Blandine, Bjørnar Lund, Inga Synnøve Nordhus, et al. "Flow Curves and Fluid Loss of Water-Based Drilling Fluids." Annual Transactions of the Nordic Rheology Society 33 (May 9, 2025): 103–16. https://doi.org/10.31265/atnrs.870.

Full text
Abstract:
A drilling fluid must fulfill numerous functions during well drilling, ranging from particle transport, lubrication, to wall stabilization. In that aim, the composition is carefully chosen by the drilling engineer for each well section according to the required properties such as density, rheological properties, chemical stability, and fluid loss. In particular, fluid loss refers to the penetration of the liquid from the drilling fluid into the rock formation. It must be controlled and preferably avoided as it may reduce the permeability of the formation and change the fluid properties due to
APA, Harvard, Vancouver, ISO, and other styles
6

Belayneh, Mesfin, Bernt Aadnøy, and Simen Moe Strømø. "MoS2 Nanoparticle Effects on 80 °C Thermally Stable Water-Based Drilling Fluid." Materials 14, no. 23 (2021): 7195. http://dx.doi.org/10.3390/ma14237195.

Full text
Abstract:
Bentonite-based drilling fluids are used for drilling, where inhibitive fluids are not required. The rheological and the density properties of the drilling fluids are highly affected by high temperature and pressure. Due to high temperature, the clay particles stick together, and the fluid system becomes more flocculated. Poorly designed drilling fluid may cause undesired operational issues such as poor hole cleaning, drill strings sticking, high torque and drag. In this study, the 80 °C thermally stable Herschel Bulkley’s and Bingham plastic yield stresses drilling fluids were formulated base
APA, Harvard, Vancouver, ISO, and other styles
7

Dong, Pu, Ren, Zhai, Gao, and Xie. "Thermoresponsive Bentonite for Water-Based Drilling Fluids." Materials 12, no. 13 (2019): 2115. http://dx.doi.org/10.3390/ma12132115.

Full text
Abstract:
As an important industrial material, bentonite has been widely applied in water-based drilling fluids to create mud cakes to protect boreholes. However, the common mud cake is porous, and it is difficult to reduce the filtration of a drilling fluid at high temperature. Therefore, this paper endowed bentonite with a thermo response via the insertion of N-isopropylacrylamide (NIPAM) monomers. The interaction between NIPAM monomers and bentonite was investigated via Fourier infrared spectroscopy (FTIR), isothermal adsorption, and X-ray diffraction (XRD) at various temperatures. The results demons
APA, Harvard, Vancouver, ISO, and other styles
8

Vamsi, Krishna Kudapa. "Experimental investigation of water based drilling mud by using graphene." i-manager's Journal on Material Science 10, no. 2 (2022): 9. http://dx.doi.org/10.26634/jms.10.2.19037.

Full text
Abstract:
In the oil and gas industry, the need for a particular composition-based drilling mud is characterized by its rheological and fluid loss properties. Enhancing these properties will increase the efficiency of drilling fluid and, hence, the wellbore damage will be controlled. Recent advancements show that the application of nanoparticles in drilling fluids will enhance their efficiency. This research investigates the influence of adding graphene nanoparticles on the performance of water-based drilling fluids. The main objective of this experiment was to investigate the effect of nanoparticles on
APA, Harvard, Vancouver, ISO, and other styles
9

Shudryk, Oleksandr, Nataliia Shevchenko, Kseniya Rezvaya, Maryna Petruniak, and Viktor Bovkun. "FLOW ANALYSIS IN A ROLLER DRILL BIT DURING DRILLING USING WATER-BASED AND HYDROCARBON-BASED MUD." Bulletin of the National Technical University "KhPI". Series: Hydraulic machines and hydraulic units, no. 1 (November 29, 2024): 58–64. https://doi.org/10.20998/2411-3441.2024.1.08.

Full text
Abstract:
Drilling is the main type of increase in hydrocarbon production. Bits of various types are used as a rock-destroying tool during drilling. When drilling any wells for oil and gas, drilling fluids are used as a working fluid. The flow of these types of liquids differs from the flow of water, which is an incompressible medium. The purpose of this work is to study the flow of the Newtonian fluid of water and two types of water-based drilling fluids, which is described by the power-law model of a non-Newtonian fluid and the hydrocarbon-based fluid of the Herschel-Bulkley type. In the work, the con
APA, Harvard, Vancouver, ISO, and other styles
10

Ismail, Abdul Razak, Wan Rosli Wan Sulaiman, Mohd Zaidi Jaafar, Issham Ismail, and Elisabet Sabu Hera. "Nanoparticles Performance as Fluid Loss Additives in Water Based Drilling Fluids." Materials Science Forum 864 (August 2016): 189–93. http://dx.doi.org/10.4028/www.scientific.net/msf.864.189.

Full text
Abstract:
Nanoparticles are used to study the rheological characteristics of drilling fluids. Nanoparticles have high surface to volume ratio, therefore only small quantity is required to blend in the drilling fluid. This research evaluates the performance of nanosilica and multi walled carbon nanotubes (MWCNT) as fluid loss additives in water based drilling fluid with various nanoparticles concentration and temperature. The results show that plastic viscosity, yield point and gel strength of drilling fluid increases as the concentration of nanoparticles increased. Drilling fluid with nanosilica gives t
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Water based drilling fluid"

1

Kristensen, Aleksander. "Flow properties of water-based drilling fluids." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-23107.

Full text
Abstract:
The objective of this master thesis was to investigate the flow properties of water based drilling fluids, utilizing measurements in both the micro and macro scale. The research was performed on two realistic drilling fluids by the use of a viscometer, a rheometer and a realistic flow loop, where the latter represents the macro scale. The research outcome could possibly improve the understanding of flow behavior in wellbores, and remove uncertainties associated with annular friction. The two fluids utilized in the research was made up with the goal of having equal rheological qualities, when
APA, Harvard, Vancouver, ISO, and other styles
2

Peng, Shuang Jiu. "Filtration properties of water based drilling fluids." Thesis, Heriot-Watt University, 1990. http://hdl.handle.net/10399/871.

Full text
Abstract:
This thesis reports an experimental and theoretical study on filtration properties of water based drilling fluids under dynamic and static conditions. The tested muds cover Freshwater/Gypsum/Lignosulphonate mud and SeawaterlKCLlPolymer mud, bariteweighted and unweighted. The effects of the solid concentration, pressure and shear rate on the filter cake characteristics and the erodability were investigated. For static filtration experiments, all tests were conducted for two hours and the spurt loss, the filter cake thickness, the ratio of wet to dry cake mass and the cumulative filtrate volume
APA, Harvard, Vancouver, ISO, and other styles
3

Sia, Luke Kennedy Si Lung. "Improving rheological and filtration properties of water based drilling fluid using palm derived methyl ester sulphonate surfactant and waste polystyrene nano-particle." Thesis, Curtin University, 2018. http://hdl.handle.net/20.500.11937/74950.

Full text
Abstract:
A new mud was formulated to improve the drilling efficiency under HPHT condition using green surfactant and nano-polystyrene. A series of rheological and filtration tests were done to ensure that the mud can maintain its integrity once used in ultra-deep wells. Scanning electron microscope based image analysis was done to evaluate the plugging abilities of nanopolystyrene. It was found that the nano-polystyrene is able to improve the performance of the mud under different conditions.
APA, Harvard, Vancouver, ISO, and other styles
4

Gurbuz, Berkay. "Experimental Characterization Of Some Water Soluble Polymers Used In Drilling And Completion Fluids." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614146/index.pdf.

Full text
Abstract:
Properly preparing the drilling fluid is an essential part of any successful drilling operation, especially in complex operations like deviated and horizontal drilling. Understanding the flow behavior of the polymers used in the drilling fluids under different conditions takes a key part in this preparation. In this study, shear rheology of some traditionally used water soluble polymers in drilling and completion fluids<br>namely PAC (polyanionic cellulose) and xanthan gum, were investigated experimentally. Instead of an oilfield standard Fann Model 35 Viscometer, an Ofite Model 900 Viscomete
APA, Harvard, Vancouver, ISO, and other styles
5

Sidi, Purnomo. "Investigating the suitability of biomass Eichhornia crassipes as a lost circulation material in water-based drilling muds." Thesis, University of Aberdeen, 2018. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=239377.

Full text
Abstract:
This study investigated the performance of the biomass Eichhornia crassipes plant (ECP) as an additive in water-based drilling-mud. ECP is an invasive plant of fresh water ecosystems, so its use in drilling operations provides a low-cost, sustainable option that has off-site environmental benefits. Mechanical tests were conducted on ECP fibres to determine their stiffness under dried and water-wet conditions. Initial tensile tests on nylon fibre determined potential experimental artefacts with the experimental approach. The dried fibres had a water content of 8.163 wt. % (SE 0.636), whereas th
APA, Harvard, Vancouver, ISO, and other styles
6

Adegbotolu, Urenna V. "Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites." Thesis, Robert Gordon University, 2016. http://hdl.handle.net/10059/3136.

Full text
Abstract:
Spent oil based drilling fluid and cutting wastes are global liabilities due to their hazardous hydrocarbon content which impacts negatively on flora, fauna, and global carbon footprint. The formulation of two demulsifiers to ensure chemically enhanced phase separation of this waste into oil, water and solid components was successfully carried out in addition to recycling the solid phase into PA6 nanocomposite materials. Initial characterisation of the untreated waste was carried out by Fourier Transform Infra Red (FTIR) for total petroleum hydrocarbon (TPH) analysis, Inductively coupled plasm
APA, Harvard, Vancouver, ISO, and other styles
7

Ballard, Tracey Jane. "An experimental study of some mechanisms of formation damage caused by oil-based drilling fluid filtrate." Thesis, Imperial College London, 1990. http://hdl.handle.net/10044/1/47762.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Arthur, Kevin Gordon. "An experimental and theoretical study of the filtration characteristics of water-based drilling muds." Thesis, Heriot-Watt University, 1986. http://hdl.handle.net/10399/1082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lundell, Christian. "Water simulation for cell based sandbox games." Thesis, Linköpings universitet, Institutionen för systemteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-108828.

Full text
Abstract:
This thesis work presents a new algorithm for simulating fluid based on the Navier-Stokes equations. The algorithm is designed for cell based sandbox games where interactivity and performance are the main priorities. The algorithm enforces mass conservation conservatively instead of enforcing a divergence free velocity field. A global scale pressure model that simulates hydrostatic pressure is used where the pressure propagates between neighboring cells. A prefix sum algorithm is used to only compute work areas that contain fluid.
APA, Harvard, Vancouver, ISO, and other styles
10

Kahvecioglu, Alper. "Designing Lost Circulation Pills For Polymer Based Drill-in Fluids." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12610226/index.pdf.

Full text
Abstract:
Specially designed non-damaging lost circulation pills (LCP) are being effectively applied for drilling depleted zones worldwide. Optimizing the LCP compositions stop the lost circulation effectively and protect the production zone from liquid and solids invasion significantly. Shape, particle size distribution and concentration of the lost circulation materials (LCM) are key parameters determining the effectiveness of LCP. In this study, the Permeability Plugging Apparatus (PPA) is utilized to evaluate effectiveness of various LCM&rsquo<br>s in curing the lost circulation. Sized calcium carbo
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Water based drilling fluid"

1

United States. Environmental Protection Agency. Office of Water and National Health and Environmental Effects Research Laboratory (U.S.). Gulf Ecology Division, eds. Synthetic-based drilling fluids: An assessment of the spatial distribution of toxicants in sediments from Gulf of Mexico drilling platforms : a report prepared for the Office of Water. U.S. Environmental Protection Agency, National Health and Environmental Effects Research Laboratory, Gulf Ecology Division, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

United States. Environmental Protection Agency. Office of Water and National Health and Environmental Effects Research Laboratory (U.S.). Gulf Ecology Division, eds. Synthetic-based drilling fluids: An assessment of the spatial distribution of toxicants in sediments from Gulf of Mexico drilling platforms : a report prepared for the Office of Water. U.S. Environmental Protection Agency, National Health and Environmental Effects Research Laboratory, Gulf Ecology Division, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. Environmental Protection Agency. Office of Water. and National Health and Environmental Effects Research Laboratory (U.S.). Gulf Ecology Division., eds. Synthetic-based drilling fluids: An assessment of the spatial distribution of toxicants in sediments from Gulf of Mexico drilling platforms : a report prepared for the Office of Water. U.S. Environmental Protection Agency, National Health and Environmental Effects Research Laboratory, Gulf Ecology Division, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

United States. Environmental Protection Agency. Office of Water and National Health and Environmental Effects Research Laboratory (U.S.). Gulf Ecology Division, eds. Synthetic-based drilling fluids: An assessment of the spatial distribution of toxicants in sediments from Gulf of Mexico drilling platforms : a report prepared for the Office of Water. U.S. Environmental Protection Agency, National Health and Environmental Effects Research Laboratory, Gulf Ecology Division, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United States. Environmental Protection Agency. Office of Water. and National Health and Environmental Effects Research Laboratory (U.S.). Gulf Ecology Division., eds. Synthetic-based drilling fluids: An assessment of the spatial distribution of toxicants in sediments from Gulf of Mexico drilling platforms : a report prepared for the Office of Water. U.S. Environmental Protection Agency, National Health and Environmental Effects Research Laboratory, Gulf Ecology Division, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Programme, United Nations Environment. The impact of water-based drilling mud discharge on the environment: An overview. UNEP, Industry & Environment Office, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Halperin, M. L. Fluid, electrolyte, and acid-base physiology: A problem-based approach. 2nd ed. W.B. Saunders, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Halperin, M. L. Fluid, electrolyte, and acid-base physiology: A problem-based approach. 3rd ed. W.B. Saunders, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

E, Sow, and Minerals and Energy Research Institute of Western Australia., eds. Model research programme for hydrodynamic response of an air lifted GBS in limited water depth. Minerals and Energy Research Institute of Western Australia, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Special Offshore Symposium China (1994 Beijing, China). The proceedings of the Special Offshore Symposium China: China/Asia offshore developments, offshore and shallow water oil/gas developments, structure analysis, hydrodynamics, fluid-structure interaction and ice. International Society of Offshore and Polar Engineers, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Water based drilling fluid"

1

Muhsan, Ali Samer, Norani M. Mohamed, Usman Siddiqui, and Muhammad U. Shahid. "Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control." In ICIPEG 2016. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3650-7_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ye, Yuchen, Yong Guo, Nan Zhang, Yadong Li, and Zhongxi Zhu. "Research on Wellbore Temperature Control Method of Water-Based Drilling Fluid." In Computational and Experimental Simulations in Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-44947-5_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Xunkun, and Guancheng Jiang. "Application and Mechanism of Catechol-Based Amide Lubricant in Water-Based Drilling Fluid." In Environmental Science and Technology: Sustainable Development. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-27431-2_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dong, Xiao-dong, Jin-sheng Sun, Xian-bin Huang, Kai-he Lv, and Jian Li. "Development and Performance Evaluation of Nanocomposite Filtrate Reducer for Water-Based Drilling Fluid." In Springer Series in Geomechanics and Geoengineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-0256-5_113.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Fan, Zhi-hua Yong, Zhi-wen Dai, and Jin-sheng Sun. "A Copolymer Water-Based Drilling Fluids Fluid-Loss Additive for High-Temperature and Salt-Calcium Condition." In Springer Series in Geomechanics and Geoengineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1964-2_402.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhou, Shan-Shan, and Ming-Biao Xu. "Enhance Filtration and Inhibition Properties of Bentonite Water-Based Drilling Fluid Using Nano-silica." In Advances in Energy Resources and Environmental Engineering. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-42563-9_106.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Abu-Jdayil, Basim, and Mamdouh Ghannam. "Effect of Surfactants on the Performance of Water-Based Drilling Fluids." In Surfactants in Upstream E&P. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70026-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gong, Wei, Li-jun You, Yi-li Kang, and Xing-lei Li. "The Damage Mechanism of Water-Based Drilling Fluid for Fractured Volcanic Gas Reservoir and Its Optimization." In Springer Series in Geomechanics and Geoengineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1964-2_410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wei, Liu, Lin Wenjie, Wang Lulu, and Quande Wang. "Study on the Performance of SMH Resin in Water-Based Drilling Fluids." In Springer Proceedings in Physics. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-3530-3_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Qiannan, Guancheng Jiang, and Yijie Wang. "Polyamino Acid Grafted Modified Nano Biochar as an Environmentally Friendly Shale Inhibitor in Water-Based Drilling Fluid." In Environment and Sustainable Development. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-3320-0_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Water based drilling fluid"

1

Dewangan, Satish Kumar, Nishant Nathwani, and Ajay Kawade. "Experimental Evaluation of Rheological Properties of Water-Based Drilling Fluid with Fly Ash Additive." In 2024 8th International Conference on Materials Engineering and Nano Sciences & 2024 8th International Conference on Material Engineering and Manufacturing. Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-nrc2r2.

Full text
Abstract:
Drilling fluid rheology is very important aspect for judging its suitability for the well-drilling operation. This study looked at how fly ash affected the rheological characteristics of drilling fluids that were based on water. Six different drilling fluid samples (combination of water-bentonite-fly ash) have been prepared: 4 samples without engine oil additives and 2 samples with engine oil additive. The shear stress between fluid layers vs. shear rate curves and the viscosity of fluid vs. shear rate curves have been plotted for the controlled shear rate application by rotational rheometer M
APA, Harvard, Vancouver, ISO, and other styles
2

Jensen, B., J. E. Paulsen, A. Saasen, O. I. Prebensen, and H. Balzer. "Application of Water Based Drilling Fluid - Total Fluid Management." In IADC/SPE Drilling Conference. Society of Petroleum Engineers, 2004. http://dx.doi.org/10.2118/87103-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hasan Hamdan, Tariq, Vaughn Reza Traboulay, Mohamad Husien, et al. "New Generation of HTHP Water Based Drilling Fluid Changing Conventional Drilling Fluids Solutions." In Abu Dhabi International Petroleum Exhibition & Conference. Society of Petroleum Engineers, 2020. http://dx.doi.org/10.2118/203439-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jafarov, Tural, Salaheldin Elkatatny, Abdulaziz Al-Majid, and Mohamed Mahmoud. "Zero Solid Invasion Water-Based Drilling Fluid." In SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition. Society of Petroleum Engineers, 2018. http://dx.doi.org/10.2118/192189-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

rgård, Eirik S., Eva Alterås, Gunnar Fimreite, Andrew Dzialowski, and Grete S. Svanes. "Design Of Water Based Drilling Fluid Systems For Deepwater Norway." In SPE/IADC Drilling Conference. Society of Petroleum Engineers, 2001. http://dx.doi.org/10.2118/67834-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Karp, Joel, Daniela Carolina Marques, Luciano Rossi, Rigoberto Morales, Amadeu Sum, and Celina Kakitani. "Hydrate Phase Equilibrium Using Water-Based Drilling Fluid." In 24th ABCM International Congress of Mechanical Engineering. ABCM, 2017. http://dx.doi.org/10.26678/abcm.cobem2017.cob17-1596.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tehrani, Mostafa Ahmadi, Andrew Popplestone, Alberto Guarneri, and Stefano Carminati. "Water-Based Drilling Fluid for HT/HP Applications." In International Symposium on Oilfield Chemistry. Society of Petroleum Engineers, 2007. http://dx.doi.org/10.2118/105485-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Headley, J. A., T. O. Walker, and R. W. Jenkins. "Environmental Safe Water-Based Drilling Fluid to Replace Oil-Based Muds for Shale Stabilization." In SPE/IADC Drilling Conference. Society of Petroleum Engineers, 1995. http://dx.doi.org/10.2118/29404-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Al-Hameedi, Abo Taleb T., Husam H. Alkinani, Shari Dunn-Norman, et al. "Evaluation of Environmentally Friendly Drilling Fluid Additives in Water-Based Drilling Mud." In SPE Europec featured at 81st EAGE Conference and Exhibition. Society of Petroleum Engineers, 2019. http://dx.doi.org/10.2118/195510-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Alqahtani, H. S., M. K. Alarfaj, and M. A. Alotaibi. "Environmentally Friendly Shale Inhibitor Water-Based Drilling Fluids." In International Petroleum Technology Conference. IPTC, 2024. http://dx.doi.org/10.2523/iptc-24070-ea.

Full text
Abstract:
Abstract Environmentally friendly Mobil crystalline materials (MCM-41) from the family of Mesoporous Silica Nanoparticles (MSNs) has been used for the first time as shale inhibitors in water-Based Drilling Fluids with full drilling fluid compositions. This shale inhibitor used in this study to eliminate the use of toxic high potassium chloride (KCl) concentration in shale drilling operations and reduce the waste management associated cost with drilling fluid treatment and disposal. The hot rolling dispersion test of MCM41 shale inhibitor with Silurian shale samples revealed to be an effective
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Water based drilling fluid"

1

Alan R. Dutton and H. Seay Nance. CENSUS AND STATISTICAL CHARACTERIZATION OF SOIL AND WATER QUALITY AT ABANDONED AND OTHER CENTRALIZED AND COMMERCIAL DRILLING-FLUID DISPOSAL SITES IN LOUISIANA, NEW MEXICO, OKLAHOMA, AND TEXAS. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/822234.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Apps, Christopher, and Tyler Johnson. PR244-173902-R01 On-water Leak Detection System Evaluation. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011504.

Full text
Abstract:
The hydrocarbon industry is directing efforts towards reducing the environmental impact of operation through improving pipeline performance and addressing evolving regulatory requirements. As a result, many different external leak detection technologies have been recently developed; however, it is challenging to test these systems with real hydrocarbon products. The research project described herein evaluated the performance of six external leak detection systems intended to identify the presence of hydrocarbon products on the surface of water. The scope was limited to an idealized freshwater
APA, Harvard, Vancouver, ISO, and other styles
3

Apps, Christopher. PR-244-193900-R01 Oil-on-water Leak Detection Technology Evaluation Phase 2. Pipeline Research Council International, Inc. (PRCI), 2020. http://dx.doi.org/10.55274/r0011647.

Full text
Abstract:
Industry is directing efforts toward reducing the environmental impact of operation through improving pipeline performance and addressing evolving regulatory requirements. As a result, external leak detection technologies have been recently developed; however, it is challenging to test these systems with real hydrocarbon products in-situ. This research project was developed to assess these external leak detection technologies' abilities to identify the presence of hydrocarbon products on the surface of water. In the first phase of the project, testing was limited to an idealized freshwater env
APA, Harvard, Vancouver, ISO, and other styles
4

Brydie, Dr James, Dr Alireza Jafari, and Stephanie Trottier. PR-487-143727-R01 Modelling and Simulation of Subsurface Fluid Migration from Small Pipeline Leaks. Pipeline Research Council International, Inc. (PRCI), 2017. http://dx.doi.org/10.55274/r0011025.

Full text
Abstract:
The dispersion and migration behavior of hydrocarbon products leaking at low rates (i.e. 1bbl/day and 10 bbl/day) from a pipeline have been studied using a combination of experimental leakage tests and numerical simulations. The focus of this study was to determine the influence of subsurface engineered boundaries associated with the trench walls, and the presence of a water table, upon the leakage behavior of a range of hydrocarbon products. The project numerically modelled three products including diesel, diluted bitumen (dilbit) and gasoline; which were chosen to span a range of fluid types
APA, Harvard, Vancouver, ISO, and other styles
5

Guidati, Gianfranco, and Domenico Giardini. Joint synthesis “Geothermal Energy” of the NRP “Energy”. Swiss National Science Foundation (SNSF), 2020. http://dx.doi.org/10.46446/publication_nrp70_nrp71.2020.4.en.

Full text
Abstract:
Near-to-surface geothermal energy with heat pumps is state of the art and is already widespread in Switzerland. In the future energy system, medium-deep to deep geothermal energy (1 to 6 kilometres) will, in addition, play an important role. To the forefront is the supply of heat for buildings and industrial processes. This form of geothermal energy utilisation requires a highly permeable underground area that allows a fluid – usually water – to absorb the naturally existing rock heat and then transport it to the surface. Sedimentary rocks are usually permeable by nature, whereas for granites
APA, Harvard, Vancouver, ISO, and other styles
6

Leece, A., and C. Jiang. A preliminary techno-economic assessment of lithium extraction from flowback and produced water from unconventional shale and tight hydrocarbon operations in Western Canada. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331879.

Full text
Abstract:
In the path towards decarbonization, rechargeable lithium-ion batteries are critical for the widespread adoption of electric vehicles and renewable energy storage systems. To meet the growing demand for this mineral, various sources of lithium are being explored. This study evaluated the technical and economic feasibility of direct lithium extraction (DLE) from flowback and produced waters (FPW) of the Duvernay shale reservoir development near Fox Creek, Alberta and the Montney tight reservoir development in Northeast British Columbia using ion-exchange sorbents. Results indicate that lithium
APA, Harvard, Vancouver, ISO, and other styles
7

Lokke, Arnkjell, and Anil Chopra. Direct-Finite-Element Method for Nonlinear Earthquake Analysis of Concrete Dams Including Dam–Water–Foundation Rock Interaction. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2019. http://dx.doi.org/10.55461/crjy2161.

Full text
Abstract:
Evaluating the seismic performance of concrete dams requires nonlinear dynamic analysis of two- or three-dimensional dam–water–foundation rock systems that include all the factors known to be significant in the earthquake response of dams. Such analyses are greatly complicated by interaction between the structure, the impounded reservoir and the deformable foundation rock that supports it, and the fact that the fluid and foundation domains extend to large distances. Presented in this report is the development of a direct finite-element (FE) method for nonlinear earthquake analysis of two- and
APA, Harvard, Vancouver, ISO, and other styles
8

Schofield, Ian S., Paul L. Brown, Mark J. Logsdon, and Matthew P. Wickham. Waste Rock Dump Characterization Studies at the Bingham Canyon Mine. Utah Geological Survey, 2024. http://dx.doi.org/10.34191/mp-179.

Full text
Abstract:
The Bingham Canyon Mine, located near Salt Lake City, Utah, is surrounded by more than 6 billion tons of waste rock developed over the open cut mining history from 1903 to present; the surface area of the waste rock is approximately 5000 acres. Waste rock dumps have a thickness of more than 1 200 feet from crest to toe. From 1930 to 2000, selected portions of the waste rock dumps were commercially leached using a ferric-sulfate-based lixiviant to extract copper, whereas other portions have only received meteoric leaching. From 2011 to present, Rio Tinto Kennecott has studied the evolution and
APA, Harvard, Vancouver, ISO, and other styles
9

Klammler, Harald. Introduction to the Mechanics of Flow and Transport for Groundwater Scientists. The Groundwater Project, 2023. http://dx.doi.org/10.21083/gxat7083.

Full text
Abstract:
Starting from Newton’s laws of motion and viscosity, this book is an introduction to fundamental aspects of fluid dynamics that are most relevant to groundwater scientists. Based on a perspective of driving versus resisting forces that govern the motion of a fluid, the author derives Darcy’s law for flow through porous media by drawing an analogy to Bernoulli’s law for fluid with negligible viscosity. By combining the effects of gravity and pressure, the author identifies hydraulic head as a convenient numerical quantity to represent the force driving groundwater flow. In contrast to the physi
APA, Harvard, Vancouver, ISO, and other styles
10

Carter, T. R., C. E. Logan, J K Clark, H. A. J. Russell, E. H. Priebe, and S. Sun. A three-dimensional bedrock hydrostratigraphic model of southern Ontario. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/331098.

Full text
Abstract:
A hydrostratigraphic framework has been developed for southern Ontario consisting of 15 hydrostratigraphic units and 3 regional hydrochemical regimes. Using this framework, the 54 layer 3-D lithostratigraphic model has been converted into a 15 layer 3-D hydrostratigraphic model. Layers are expressed as either aquifer or aquitard based principally on hydrogeologic characteristics, in particular the permeability and the occurrence/absence of groundwater when intersected by a water well or petroleum well. Hydrostratigraphic aquifer units are sub-divided into up to three distinct hydrochemical reg
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Water based drilling fluid' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography