Log in

Relevant bibliographies by topics / Welding processes / Journal articles

To see the other types of publications on this topic, follow the link: Welding processes.

Journal articles on the topic 'Welding processes'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Welding processes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Krivtsun, I. V. "Anode processes in welding arcs." Paton Welding Journal 2018, no. 12 (2018): 91–104. http://dx.doi.org/10.15407/tpwj2018.12.10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

MIYASAKA, Fumikazu. "Arc Welding Processes." JOURNAL OF THE JAPAN WELDING SOCIETY 78, no. 5 (2009): 426–27. http://dx.doi.org/10.2207/jjws.78.426.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ankara, Alpay. "Advanced welding processes." Materials & Design 14, no. 4 (1993): 267. http://dx.doi.org/10.1016/0261-3069(93)90098-g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lendel, I. V., V. A. Lebedev, S. Yu Maksimov, and G. V. Zhuk. "Automation of welding processes with use of mechanical welding equipment." Paton Welding Journal 2017, no. 6 (2017): 86–91. http://dx.doi.org/10.15407/tpwj2017.06.16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wu, Boyi, and I. V. Krivtsun. "Processes of nonconsumable electrode welding with welding current modulation (review) part iii. modeling of the processes of TIG welding by modulated current." Paton Welding Journal 2020, no. 1 (2020): 2–13. http://dx.doi.org/10.37434/tpwj2020.01.01.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kumar Rajak, Dipen, Durgesh D. Pagar, Pradeep L. Menezes, and Arameh Eyvazian. "Friction-based welding processes: friction welding and friction stir welding." Journal of Adhesion Science and Technology 34, no. 24 (2020): 2613–37. http://dx.doi.org/10.1080/01694243.2020.1780716.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Olowinsky, Alexander, Andrei Boglea, and Jens Gedicke. "Innovative Laser Welding Processes." Laser Technik Journal 5, no. 3 (2008): 48–51. http://dx.doi.org/10.1002/latj.200890027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Auel, C. B. "PROCESSES OF ELECTRIC WELDING.*." Journal of the American Society for Naval Engineers 28, no. 1 (2009): 266–71. http://dx.doi.org/10.1111/j.1559-3584.1916.tb00621.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Saraev, Yu N., A. G. Lunev, A. S. Kiselev, A. S. Gordynets, and M. V. Trigub. "Complex for investigation of arc welding processes." Paton Welding Journal 2018, no. 8 (2018): 13–21. http://dx.doi.org/10.15407/tpwj2018.08.03.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Katayama, Seiji. "Special Issue on Progress in Welding Processes." International Journal of Automation Technology 7, no. 1 (2013): 87. http://dx.doi.org/10.20965/ijat.2013.p0087.

Full text

Abstract:

Welding is one of the most versatile joining methods for constructing products and structures in nearly all industrial fields. Arc has been widely used as a cheap heat source for welding since carbon arc fusion welding was first applied to join Pb plates in about 1880. New welding technologies have been developed according to social needs or changes since 1960. Therefore, half-automated welding, automatic welding and highefficient welding have been developed for saving man-power and afterward full automation. First, tandem one-side SAW (submerged arc welding), high-speed rotational arc, high-h

APA, Harvard, Vancouver, ISO, and other styles

11

MIYASAKA, Fumikazu, and Satoshi YAMANE. "Arc Welding Processes and Systemization." JOURNAL OF THE JAPAN WELDING SOCIETY 80, no. 5 (2011): 434–38. http://dx.doi.org/10.2207/jjws.80.434.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Bad'yanov, B. N. "Computer control of welding processes." Welding International 16, no. 7 (2002): 544–47. http://dx.doi.org/10.1080/09507110209549573.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Pasek-Siurek, Halina. "Plasma welding: processes and equipment." Welding International 28, no. 9 (2013): 672–78. http://dx.doi.org/10.1080/09507116.2012.753222.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Krajewski, Arkadiusz. "Mechanical vibrations in welding processes." Welding International 30, no. 1 (2015): 27–32. http://dx.doi.org/10.1080/09507116.2014.937606.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

DebRoy, T., and S. A. David. "Physical processes in fusion welding." Reviews of Modern Physics 67, no. 1 (1995): 85–112. http://dx.doi.org/10.1103/revmodphys.67.85.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Khaustov, S. V., S. V. Kuz’min, V. I. Lysak, and V. V. Pai. "Thermal processes in explosive welding." Combustion, Explosion, and Shock Waves 50, no. 6 (2014): 732–38. http://dx.doi.org/10.1134/s0010508214060161.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Krivtsun, I. V. "Anode processes in welding arcs." Avtomatičeskaâ svarka (Kiev) 2018, no. 12 (2018): 103–17. http://dx.doi.org/10.15407/as2018.12.10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Fydrych, Dariusz, and Jerzy Łabanowski. "An experimental study of high-hydrogen welding processes." Revista de Metalurgia 51, no. 4 (2015): e055. http://dx.doi.org/10.3989/revmetalm.055.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

David, S. A., T. DebRoy, and J. M. Vitek. "Phenomenological Modeling of Fusion Welding Processes." MRS Bulletin 19, no. 1 (1994): 29–35. http://dx.doi.org/10.1557/s0883769400038835.

Full text

Abstract:

Welding is utilized in 50% of the industrial, commercial, and consumer products that make up the U.S. gross national product. In the construction of buildings, bridges, ships, and submarines, and in the aerospace, automotive, and electronic industries, welding is an essential activity. In the last few decades, welding has evolved from an empirical art to a more scientifically based activity requiring synthesis of knowledge from various disciplines. Defects in welds, or poor performance of welds, can lead to catastrophic failures with costly consequences, including loss of property and life.Fig

APA, Harvard, Vancouver, ISO, and other styles

20

Abbasi, Mahmoud, Amin Abdollahzadeh, Behrouz Bagheri, Ahmad Ostovari Moghaddam, Farzaneh Sharifi, and Mostafa Dadaei. "Study on the effect of the welding environment on the dynamic recrystallization phenomenon and residual stresses during the friction stir welding process of aluminum alloy." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235, no. 8 (2021): 1809–26. http://dx.doi.org/10.1177/14644207211025113.

Full text

Abstract:

Various methods have been proposed to modify the friction stir welding. Friction stir vibration welding and underwater friction stir welding are two variants of this technique. In friction stir vibration welding, the adjoining workpieces are vibrated normal to the joint line while friction stir welding is carried out, while in underwater friction stir welding the friction stir welding process is performed underwater. The effects of these modified versions of friction stir welding on the microstructure and mechanical characteristics of AA6061-T6 aluminum alloy welded joints are analyzed and com

APA, Harvard, Vancouver, ISO, and other styles

21

Kloppenborg, Thomas, Nooman Ben Khalifa, and A. Erman Tekkaya. "Accurate Welding Line Prediction in Extrusion Processes." Key Engineering Materials 424 (December 2009): 87–95. http://dx.doi.org/10.4028/www.scientific.net/kem.424.87.

Full text

Abstract:

In contrast to conventional extrusion processes, where a lot of research is done on in the welding quality, in composite extrusion, research is investigated into the welding line positioning. As a result of the process principle, the reinforcing elements are embedded into the longitudinal welding line. Hence, an undefined material flow inside the welding chamber induces reinforcement deflection, which can lead to reduced mechanical properties, as momentum of inertia. Therefore and to reduce costly experimental investigations, a new method of an automated numerical welding line prediction was d

APA, Harvard, Vancouver, ISO, and other styles

22

Jamal, Jaber, Basil Darras, and Hossam Kishawy. "A study on sustainability assessment of welding processes." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234, no. 3 (2019): 501–12. http://dx.doi.org/10.1177/0954405419875355.

Full text

Abstract:

The concept of “sustainability” has recently risen to take the old concept of going “green” further. This article presents general methodologies for sustainability assessments. These were then adapted to measure and assess the sustainability of welding processes through building a complete framework, to determine the best welding process for a particular application. To apply this methodology, data about the welding processes would be collected and segregated into four categories: environmental impact, economic impact, social impact, and physical performance. The performance of each category w

APA, Harvard, Vancouver, ISO, and other styles

23

Fratini, Livan, Gianluca Buffa, and Dario la Spisa. "Friction Based Solid State Welding Processes." Key Engineering Materials 504-506 (February 2012): 3–14. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.3.

Full text

Abstract:

In the last decade the industrial use of solid state welding processes based on frictional forces work decaying into heat is continuously increasing due to their strong advantages with respect to traditional fusion techniques. Several advances have been proposed by the scientific community regarding process mechanics, material flow and also the computer aided engineering of the operation with the aim to maximize the mechanical performances of the welded joints. In the paper Friction Stir Welding (FSW) and Linear Friction Welding (LFW) operations are considered and a review of the most relevant

APA, Harvard, Vancouver, ISO, and other styles

24

Sangwan, K. S., Christoph Herrmann, Patricia Egede, Vikrant Bhakar, and Jakob Singer. "Life Cycle Assessment of Arc Welding and Gas Welding Processes." Procedia CIRP 48 (2016): 62–67. http://dx.doi.org/10.1016/j.procir.2016.03.096.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Lendel, I. V., V. A. Lebedev, S. Yu Maksimov, and G. V. Zhuk. "Automation of welding processes with use of mechanical welding equipment." Автоматическая сварка 2017, no. 6 (2017): 99–104. http://dx.doi.org/10.15407/as2017.06.16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Arora, Hitesh, Rupinder Singh, and Gurinder Singh Brar. "Thermal and structural modelling of arc welding processes: A literature review." Measurement and Control 52, no. 7-8 (2019): 955–69. http://dx.doi.org/10.1177/0020294019857747.

Full text

Abstract:

This paper presents a state-of-the-art critical review of the thermal and structural modelling of the arc welding process. During the welding process, high temperature in the welding zone leads to generation of unwanted residual stresses and results in weld distortion. Measurement of the temperature distribution was a key issue and challenge in the past decade. Thermomechanical analysis is among the best-known techniques to simulate and investigate the temperature distribution, welding distortion and residual stresses in the weld zone. The main emphasis of this review is the thermal and struct

APA, Harvard, Vancouver, ISO, and other styles

27

Makhlin, N. M. "Processes occurring at excitation of the welding arc (Review)." Paton Welding Journal 2020, no. 9 (2020): 43–48. http://dx.doi.org/10.37434/tpwj2020.09.08.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Zhernosekov, A. M., and V. M. Kislitsyn. "Application of pulse welding power sources in electrochemical processes." Paton Welding Journal 2015, no. 8 (2015): 35–38. http://dx.doi.org/10.15407/tpwj2015.08.07.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Korotynsky, A. E., and M. I. Skopyuk. "Intellectualization of processes for control of arc welding parameters." Paton Welding Journal 2017, no. 6 (2017): 9–13. http://dx.doi.org/10.15407/tpwj2017.06.02.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

V, Smirnova Zhanna. "Calculation of metallurgical processes during welding." International Journal of Emerging Trends in Engineering Research 8, no. 5 (2020): 1529–34. http://dx.doi.org/10.30534/ijeter/2020/09852020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Chang, Hee-Seok, and Jong-Yub Lee. "Monitoring of Resistance Spot Welding Processes." Journal of the Korean Welding and Joining Society 30, no. 1 (2012): 19–26. http://dx.doi.org/10.5781/kwjs.2012.30.1.19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

SHIMIZU, Hiroyuki. "Materials and Processes for Arc Welding." JOURNAL OF THE JAPAN WELDING SOCIETY 80, no. 8 (2011): 683–92. http://dx.doi.org/10.2207/jjws.80.683.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Erdős, Gábor, Zsolt Kemény, András Kovács, and József Váncza. "Planning of Remote Laser Welding Processes." Procedia CIRP 7 (2013): 222–27. http://dx.doi.org/10.1016/j.procir.2013.05.038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Slania, J., Z. Mikno, and M. Wojcik. "Temperature measurement problems in welding processes." Welding International 21, no. 8 (2007): 589–92. http://dx.doi.org/10.1080/09507110701637916.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Pashatskii, N. V., and A. V. Prokhorov. "Thermal processes in welding flat components." Welding International 14, no. 12 (2000): 979–80. http://dx.doi.org/10.1080/09507110009549302.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Grinberg, B. A., M. A. Ivanov, V. V. Rybin, et al. "Fragmentation processes during explosion welding (review)." Russian Metallurgy (Metally) 2013, no. 10 (2013): 727–37. http://dx.doi.org/10.1134/s0036029513100030.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Kubiszyn, I., and J. Slania. "Modelling physical phenomena of welding processes." Welding International 17, no. 2 (2003): 89–93. http://dx.doi.org/10.1533/wint.2003.3072.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Szewczyńska, Małgorzata, Emilia Pągowska, and Krystyna Pyrzyńska. "Emissions of fluorides from welding processes." Journal of Environmental Sciences 37 (November 2015): 179–83. http://dx.doi.org/10.1016/j.jes.2015.03.024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Ronda, J., O. Mahrenholtz, and R. Hamann. "Thermomechanical simulation of underwater welding processes." Archive of Applied Mechanics 62, no. 1 (1992): 15–27. http://dx.doi.org/10.1007/bf00786678.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Karkhin, V. A., V. V. Plochikhine, A. S. Ilyin, and H. W. Bergmann. "Inverse Modelling of Fusion Welding Processes." Welding in the World 46, no. 11-12 (2002): 2–13. http://dx.doi.org/10.1007/bf03263391.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Kah, P., R. Suoranta, and J. Martikainen. "Advanced gas metal arc welding processes." International Journal of Advanced Manufacturing Technology 67, no. 1-4 (2012): 655–74. http://dx.doi.org/10.1007/s00170-012-4513-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Anca, Andrés, Alberto Cardona, José Risso, and Víctor D. Fachinotti. "Finite element modeling of welding processes." Applied Mathematical Modelling 35, no. 2 (2011): 688–707. http://dx.doi.org/10.1016/j.apm.2010.07.026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Mendez, Patricio F., Nairn Barnes, Kurtis Bell, et al. "Welding processes for wear resistant overlays." Journal of Manufacturing Processes 16, no. 1 (2014): 4–25. http://dx.doi.org/10.1016/j.jmapro.2013.06.011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Hirose, Akio, and Kojiro F. Kobayashi. "Welding and joining processes for automobiles." Journal of Japan Institute of Light Metals 56, no. 3 (2006): 184–88. http://dx.doi.org/10.2464/jilm.56.184.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Wu, Qian, Han Tao, Wang Yong, and Hong Jie Zhang. "Microstructure and Mechanical Properties of X80 Girth Welds with Different Welding Processes." Materials Science Forum 898 (June 2017): 1079–87. http://dx.doi.org/10.4028/www.scientific.net/msf.898.1079.

Full text

Abstract:

X80 pipeline steels were employed to investigate the effects of two different welding processes (swing welding and row welding) on the quality of weld joints. The welding thermal cycles of multi-pass welding were tested and the microstructures of the two kinds of weld joints were studied by optical microscope. The hardness tests as well as low-temperature impact tests combined with fracture analysis with scanning electron microscope (SEM) were carried out to evaluate the properties of weld joints. The results showed that under the similar condition of heat input, the grain of swing welding joi

APA, Harvard, Vancouver, ISO, and other styles

46

Ihochi, Akihiko, and Tokuji Maruyama. "Features of arc welding of thin plates with various welding processes." Journal of the Japan Welding Society 57, no. 3 (1988): 164–70. http://dx.doi.org/10.2207/qjjws1943.57.164.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Noda, T. "Welding thin stainless steel sheet (1) ‐ Arc and resistance welding processes." Welding International 7, no. 12 (1993): 935–41. http://dx.doi.org/10.1080/09507119309548521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Kik, Tomasz, Marek Slovacek, Jaromir Moravec, and Mojmir Vanek. "Numerical Simulations of Heat Treatment Processes." Applied Mechanics and Materials 809-810 (November 2015): 799–804. http://dx.doi.org/10.4028/www.scientific.net/amm.809-810.799.

Full text

Abstract:

Welding and heat treatment are a modern, high efficient production technologies. During last few years requirements for quality of the welded joints have been constantly increasing in all production areas. Unfortunately, this approach increases the cost of production due to demand of intense experimental or prototype work prior the use of technology to make a final product. Preliminary experiments have to take into account proper chose of welding technology, materials, welding parameters, clamping and final optimization the welding conditions. All of these activities can be supported or even r

APA, Harvard, Vancouver, ISO, and other styles

49

Brown, S. B., and H. Song. "Rezoning and Dynamic Substructuring Techniques in FEM Simulations of Welding Processes." Journal of Engineering for Industry 115, no. 4 (1993): 415–23. http://dx.doi.org/10.1115/1.2901784.

Full text

Abstract:

Distortion and residual stresses cause significant problems in the welding of large structures. Prediction of these phenomena would provide substantial assistance to the design and fabrication of welding. Unfortunately, the complexity of structural interactions during welding and the severe nonlinearities associated with the welding process limit the application of weld simulations. This presentation develops rezoning and dynamic substructuring techniques that make the finite element welding simulation of large structures more tractable. Both techniques exploit the fact that only a local zone

APA, Harvard, Vancouver, ISO, and other styles

50

Boumerzoug, Zakaria. "Joining of dissimilar materials by friction stir welding." MATEC Web of Conferences 224 (2018): 01118. http://dx.doi.org/10.1051/matecconf/201822401118.

Full text

Abstract:

Welding is a process of joining materials into one piece. Welding is used extensively for pipe welding, aerospace, aviation, biomedical implants, fabrication of race cars, choppers, etc. Welding processes include thermal fusion joining processes and solid-state joining processes. Among solid-state joining processes, there is a friction stir welding which is applied to join two workpieces without materials. This technique of welding has great is used to weld dissimilar materials. This type of welding is gaining renewed interest, because the main objective is to reduce the total weight and maint

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!