To see the other types of publications on this topic, follow the link: Wheel disc.

Dissertations / Theses on the topic 'Wheel disc'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 25 dissertations / theses for your research on the topic 'Wheel disc.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Duranton, Coralie. "Fatigue analysis of two wheel‐ mounted brake disc designs." Thesis, KTH, Spårfordon, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-177313.

Full text
Abstract:
Due to a need of more compact bogies, the brake discs can be mounted on the railway wheels, bolted through the wheel web. Thus, the wheels are drilled and have multiple areas of contact with the brake discs. To establish maintenance procedures that will be applied to the  wheels,  SNCF  used  the  feedback  from  experience  (as  with  the  train  AGC)  which  gives  perfect  performance  in  terms  of  safety.  However,  to  optimize  the  maintenance  process, numerical  simulations  may  be  preferred  since  they  are  less  conservative.  This  report  describes  the  numerical  simulatio
APA, Harvard, Vancouver, ISO, and other styles
2

Gallardo, Hernandez Ezequiel Alberto. "Wheel and rail contact simulation using a twin disc tester." Thesis, University of Sheffield, 2009. http://etheses.whiterose.ac.uk/14924/.

Full text
Abstract:
The contact between wheel and rail has been studied for many years in the field and using different test approaches. The wheel/rail contact in this work was simulated by a rolling-sliding twin disc contact machine. Currently this approach is widely accepted as a technique for studying different aspects of the wheel/rail contact such as; wear, rolling contact fatigue (RCF) crack propagation and issues concerning wheel/rail isolation.
APA, Harvard, Vancouver, ISO, and other styles
3

Fagrell, William. "Optimization of a cutter wheel bearing." Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-79051.

Full text
Abstract:
This Master's thesis project was provided by Epiroc Rock Drills AB and conducted at Camatec Industriteknik AB in Karlstad, Sweden. The project is centered around the cutter wheel in the mechanical rock excavator Mobile Miner 40V.  This cutter wheel is equipped with cutter discs that grind rock into debris as the wheel rotates and thrusts forward. The internal system consisting of a bearing constellation and the components in its vicinity has experienced a certain degree of wear in the form of scuffing and this was detected on the surfaces of some of the components in the system. The reasons fo
APA, Harvard, Vancouver, ISO, and other styles
4

Катаржнов, Станіслав Іванович, Станислав Иванович Катаржнов, Stanislav Ivanovych Katarzhnov, В. В. Курилов та В. И. Лебедь. "Анализ напряженно-деформированного состояния диска колеса при ударном воздействии". Thesis, Издательство СумГУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/8295.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Arend, Clarissa de Oliveira, Johanne Gallagher, and Peter Orell. "Reinventing the Wheel to Guide Ecovillages towards Sustainability." Thesis, Blekinge Tekniska Högskola, Sektionen för ingenjörsvetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-3730.

Full text
Abstract:
Ecovillages acting as experimental community models have the potential to help move society towards sustainability by developing alternative solutions for sustainable living. Their contribution is through the power of example, demonstrating successful alternative systems that can be replicated at higher scales through the broader community. However, ecovillages often struggle with long-term planning and lack a systematic approach to integrating structure, processes and actions into strategic planning. Research was conducted to examine how ecovillages could be supported in this deficiency to ma
APA, Harvard, Vancouver, ISO, and other styles
6

Kapoun, Lukáš. "Konstrukce disku kola osobního automobilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231270.

Full text
Abstract:
The present master thesis deals with the design of wheel disk for passenger car. The review part of this thesis summaries the history and development of the wheel; this is followed by a description of individual construction types of wheel disk for passenger car presently used. The construction part of this thesis provides a design of disk of given parameters based on the analysis of forces acting on the car wheel. For the purposes of design, the stress and fatigue analyses are performed.
APA, Harvard, Vancouver, ISO, and other styles
7

Svensson, Dennis, and Svärd Tobias Falk. "Mechanical dry grinding process of saw chain." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-39927.

Full text
Abstract:
The cutting links on chainsaws needs to be sharpened regularly to retain its sharpness. The most effective way is to use a machine wheel grinder. However, due to high friction there is a high risk of tempering the steel and damaging the sustainability to wear, resulting in a dull cutting edge. In order to develop a grinding method that produces a good result every time, a series of parameters were tested in order to determine which combination of these generated the best grinding results. With all parameters established the results shows that the attributes of each grinding wheel are the main
APA, Harvard, Vancouver, ISO, and other styles
8

Linder, Johan. "An integrated brake disc and electric drive for vehicle propulsion : A FEASIBILITY STUDY." Thesis, KTH, Skolan för elektro- och systemteknik (EES), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-187652.

Full text
Abstract:
In this thesis, the feasibility to integrate an brake disc and electric machine is investigated. In wheel motors (IWMs) have several advantages, such as saving space in the vehicle, individual and direct control at the wheels and the absence of a mechanical transmission. However, today’s IWMs are heavy and, thus, negatively affect the driving performance of the vehicle due to the increase of the unsprung mass. By integrating an already existing part in the wheel, this increase of the unsprung mass can be minimized. The brake disc manages high temperatures, a significant wear in rough environ-me
APA, Harvard, Vancouver, ISO, and other styles
9

Lindberg, Eskil. "A Vibro-Acoustic Study of Vehicle Suspension Systems : Experimental and Mathematical Component Approaches." Doctoral thesis, KTH, MWL Strukturakustik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-121575.

Full text
Abstract:
The objective of the present work is to study the vehicle suspension as a vibro-acoustic system of high complexity, consisting of many sub-systems with fundamentally different acoustical properties. In a parallel numerical and experimental modelling effort, important contributions to the understanding of its behaviour have been achieved. These findings are based on a balance between component investigations and global modelling of the complete system; they have been formulated for the transmission of both tyre-road excitation and friction-induced vibrations in the brake system. Initially an ex
APA, Harvard, Vancouver, ISO, and other styles
10

Machatka, Martin. "Experimentální výzkum pískování v kontaktu kola a kolejnice." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231057.

Full text
Abstract:
Presented master's thesis is focused on the experimental research of the sanding parameters in order to improve adhesion in the contact between wheel and rail. Sanding is the application of the sanding material directly in the wheel/rail contact. It is still common, most effective and traditional way how to deal with low adhesion problem, which is mainly caused by environmental contaminants. Research is important for the better understanding of the sanding process and also provides data, which are necessary for it's optimization and efficiency improvement. Newly developed twin-disc machine was
APA, Harvard, Vancouver, ISO, and other styles
11

Podhora, David. "Konstrukční návrh pohonu přední hnané nápravy traktoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378416.

Full text
Abstract:
This master’s thesis is deal with the design of the tractor’s front axle drive to enlarge its braking efficiency of the standing tractor fixed by the parking brake. In the first two chapters, the basic information related to the above stated issue is being summarized. Next, procedure of creating the design including the fundamental calculation proposal is being described. In the last chapter, the strain-stress analysis of the selected partial sections of the design is being presented. The final design is supported with the drawing documentation that is being part of this master’s thesis, too.
APA, Harvard, Vancouver, ISO, and other styles
12

Gabriel, Tomáš. "Konstrukce zkušebního zařízení pro testování adheze a hluku v kontaktu kola a kolejnice." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417765.

Full text
Abstract:
This master’s thesis is dedicated to the design of an experimental rig that allows investigation of causes for noise during tram’s passing of a track curve and the developement of means to mitigate this noise. The opening section of this thesis contains theoretical background for the tribological mechanics of wheel-rail contact with emphasis on the process of noise generation, followed by an overview of laboratory tst rigs with similar purpose. Design itself is centered around the implementation of the dynamic model of wheel-rail contact using real tram wheel. Resulting test rig allows measure
APA, Harvard, Vancouver, ISO, and other styles
13

Tozetti, Karla Dubberstein. "Efeito da carga e do tamanho do grão abrasivo no desgaste do ferro fundido branco 19,9 % cromo e 2,9 % carbono." Universidade Federal do Espírito Santo, 2013. http://repositorio.ufes.br/handle/10/6233.

Full text
Abstract:
Made available in DSpace on 2016-12-23T14:08:10Z (GMT). No. of bitstreams: 1 Karla Dubberstein Tozetti.pdf: 2038739 bytes, checksum: f6618f8c3d4a6be204f5f15fc187f5a1 (MD5) Previous issue date: 2013-04-01<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior<br>No trabalho foi investigado o efeito da carga e do tamanho da partícula abrasiva na resistência ao desgaste da liga de ferro fundido branco alto cromo (FFBAC) com composição química de 2,9% de carbono e 19,9% de cromo em massa. A microestrutura da liga é composta por uma matriz de martensita revenida a 200 ºC com carboneto eut
APA, Harvard, Vancouver, ISO, and other styles
14

Wickramasinghe, Munidasa Widhana Pathiranage Isuru Udara. "Investigation of surface ratchetting due to rail/wheel contact." Thesis, Queensland University of Technology, 2014. https://eprints.qut.edu.au/67800/1/Munidasa%20Widhana%20Pathiranage%20Isuru%20Udara_Wickramasinghe_Thesis.pdf.

Full text
Abstract:
This project advances the knowledge of rail wear and crack formation due to rail/wheel contact in Australian heavy-haul railway lines. This comprehensive study utilised numerous techniques including: simulation using a twin-disk test-rig, scanning electron microscope particle analysis and finite element modeling for material failure prediction. Through this work, new material failure models have been developed which may be used to predict the lifetime and reliability of materials undergoing severe contact conditions.
APA, Harvard, Vancouver, ISO, and other styles
15

Tolley, Rebecca. "Disco, Tattoos and Tutus: Blue Collar Performances on Wheels." Digital Commons @ East Tennessee State University, 2012. https://dc.etsu.edu/etsu-works/5739.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

McGrath, PJ, DG Hattingh, and MN James. "Correlation between Fatigae of Automotive Wheel Centre - Discs and Hour-glass Laboratory Specimen." R & D Journal, 2009. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1000876.

Full text
Abstract:
Fatigue testing of complete automotive wheels is carried out on rotary bendmachines. These commercial mac hin e s s imulnt e h ar d - c o rn e rin g c o n ditio n s an d mainly testthefatigue performance of the central section of an automotive wheel' . This paper develops a relationship for predicting the fatigue performance of the wheel,based onfatigue tests of hourglass specimens machinedfrom centre discs. This is more economical of material and, in principle, also allows the effect on fatigue performance of change inproduction parameters or starting alloy to be assess ed, by c o n sid e rin
APA, Harvard, Vancouver, ISO, and other styles
17

Juhlin, Oskar. "Prometheus at the wheel : representations of road transport informatics /." Linköping : Tema, Univ, 1997. http://www.bibl.liu.se/liupubl/disp/disp97/arts162s.htm.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Quinlan, Margaret M. "Narrating Lives and Raising Consciousness Through Dance: The Performance of (Dis)Ability at Dancing Wheels." View abstract, 2009. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:3371581.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Purschke, Ralf Verfasser], Ulrich [Akademischer Betreuer] [Walter, and Enrico [Akademischer Betreuer] Stoll. "Synthetic Gear Wheels for Space Mechanisms / Ralf Purschke. Betreuer: Ulrich Walter. Gutachter: Ulrich Walter ; Enrico Stoll." München : Universitätsbibliothek der TU München, 2015. http://nbn-resolving.de/urn:nbn:de:bvb:91-diss-20151201-1250675-1-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Regner, Dominik. "Studie příčného rychlostního pole v blízkosti rotujícího kola s uvažováním vlivu nucené konvekce kotoučové brzdy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399576.

Full text
Abstract:
The master thesis deals with the influence of a local change of temperature due to advection from disc brake to axial velocity field close to the rotating wheel of a car. The second goal is to set parameters applicable to various wheel discs and study of the influence of these parameters to aerodynamical properties of car and thermodynamical properties of the disc brake. The thesis is numerically executed in StarCCM+. The first part focuses on theoretical background about the numerical solution and current status of research. There are described disc parameters, geometry input and solver setti
APA, Harvard, Vancouver, ISO, and other styles
21

Пасічник, Сергій Сергійович, Сергей Сергеевич Пасичник та Sergey S. Pasichnik. "Поліпшення динамічних і ресурсних показників вантажних вагонів з комплексно модернізованими візками". Thesis, Видавництво Дніпропетровського національного університету залізничного транспорту імені академіка В. Лазаряна, 2012. http://eadnurt.diit.edu.ua:82/jspui/handle/123456789/1321.

Full text
Abstract:
Пасічник, С. С. Поліпшення динамічних та ресурсних показників вантажних вагонів з комплексно модернізованими візками : авт. дис. к. т. н.: 05.22.07 / С. С. Пасічник ; Дніпропетр. нац. ун-т залізн. трансп. ім. акад. В. Лазаряна. - Д. : Вид-во Днiпропетр. нац. ун-ту залізн. трансп. iм. акад. В. Лазаряна, 2012 УДК 629.463.027.1 ГРНТИ 55.41.37<br>UK: АНОТАЦІЯ Дисертацію присвячено розробці пропозицій щодо спрощення обслуговування комплексно модернізованих візків вантажних вагонів при їх експлуатації і ремонті, а також подальшому розвитку комплексної модернізації візків за рахунок використання нови
APA, Harvard, Vancouver, ISO, and other styles
22

Hart, M. J. Alexandra. "Action in Chronic Fatigue Syndrome: an Enactive Psycho-phenomenological and Semiotic Analysis of Thirty New Zealand Women's Experiences of Suffering and Recovery." Thesis, University of Canterbury. Social and Political Sciences, 2010. http://hdl.handle.net/10092/5294.

Full text
Abstract:
This research into Chronic Fatigue Syndrome (CFS) presents the results of 60 first-person psycho-phenomenological interviews with 30 New Zealand women. The participants were recruited from the Canterbury and Wellington regions, 10 had recovered. Taking a non-dual, non-reductive embodied approach, the phenomenological data was analysed semiotically, using a graph-theoretical cluster analysis to elucidate the large number of resulting categories, and interpreted through the enactive approach to cognitive science. The initial result of the analysis is a comprehensive exploration of the experienc
APA, Harvard, Vancouver, ISO, and other styles
23

"Modified Design of a Precision Planter for a Robotic Assistant Farmer." Thesis, 2014. http://hdl.handle.net/10388/ETD-2014-02-1451.

Full text
Abstract:
Modified design of a planter to be attached to a mobile robot, was the main objective of this project. This research project was part of a larger project, called “Developing robotics assisted technology for farming”. The main motivation for this research project is the fact that mobile robot, is an electric powered vehicle with limited power and pulling force. Thus, a customized planter with a customized connection mechanism should be designed. Besides, it should require less draft force compared to existing planters so that it can be pulled by the mobile robot. The developed planter should h
APA, Harvard, Vancouver, ISO, and other styles
24

Lo, Yuan-Lung, and 羅元隆. "Finite Element Impact Analysis and Test of 13 Degree Disc Wheel and a Study on its Failure Criteria." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/57893619190114519973.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Wu, Tsung-Lin, and 吳宗霖. "Optimization Design and Analysis for Fly-wheel Disk Rotor." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/96111795097240975140.

Full text
Abstract:
碩士<br>大葉大學<br>機械與自動化工程學系<br>103<br>In our history, the concept of fly-wheel has been operate for long time, but in different shape and situations. Until now, we have develop the fly-wheel into a device which can store energy inside of it, and transform the energy into electricity whenever we needed, for such system we have given the name of “Fly-Wheel Battery” or “Motive Battery.” To increase the efficiency of the fly-wheel, the shape design and material choose of the fly-wheel is also important. This research will focus on the flange difference of fly-wheel shape, with or without a flange, an
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!