Log in

Relevant bibliographies by topics / Winch based Lifting / Journal articles

To see the other types of publications on this topic, follow the link: Winch based Lifting.

Journal articles on the topic 'Winch based Lifting'

Author: Grafiati

Published: 7 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 16 journal articles for your research on the topic 'Winch based Lifting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Asmara, I. Putu Sindhu, and Hartono Yudo. "Evaluation of Boat Lifting System Using A Multiple-Drum Winch." Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan 17, no. 1 (2020): 7–14. http://dx.doi.org/10.14710/kapal.v17i1.26425.

Full text

Abstract:

Material handling equipment is designed or selected based on two factors, the aspects of technical and economic. Technical aspects of a boatlift are designated by technical specifications that can meet with the need to lift and move a boat from land to waterway and vice versa. Boatlift is a type of Rubber Tyred Gantry crane specifically designed for moving of small craft, small and medium vessels with a capacity of 10 tons to 600 tons. Boatlift with a capacity of 5 tons is very rarely to find and very different from other types of cranes such as overhead cranes that are easy to find. Boatlift

APA, Harvard, Vancouver, ISO, and other styles

2

Ren, Zhengru, Roger Skjetne, and Zhen Gao. "A Crane Overload Protection Controller for Blade Lifting Operation Based on Model Predictive Control." Energies 12, no. 1 (2018): 50. http://dx.doi.org/10.3390/en12010050.

Full text

Abstract:

Lifting is a frequently used offshore operation. In this paper, a nonlinear model predictive control (NMPC) scheme is proposed to overcome the sudden peak tension and snap loads in the lifting wires caused by lifting speed changes in a wind turbine blade lifting operation. The objectives are to improve installation efficiency and ensure operational safety. A simplified three-dimensional crane-wire-blade model is adopted to design the optimal control algorithm. A crane winch servo motor is controlled by the NMPC controller. The direct multiple shooting approach is applied to solve the nonlinear

APA, Harvard, Vancouver, ISO, and other styles

3

Sheshukova, E. I., D. A. Shibanov, S. L. Ivanov, et al. "Assessment of loads acting on the working attachment of a mine shovel (Part 1)." Mining Industry Journal (Gornay Promishlennost), no. 3/2024 (July 10, 2024): 143–48. http://dx.doi.org/10.30686/1609-9192-2024-3-143-148.

Full text

Abstract:

One of the major tasks in carrying out open-pit mining operations is timely and high quality maintenance and repair of mining equipment, in particular, mechanical shovels, which secures a required availability level. The most loaded are the lift and pressure drives of the shovel's working attachments, which significantly increases the risk of failure of their components. An adequate assessment of the loads acting on these drives through analyzing the changes in currents and voltages of their motors makes it possible to adjust the time between maintenance. In the course of the study, the repres

APA, Harvard, Vancouver, ISO, and other styles

4

Wu, Lai Jie, Xue Bin Li, Yuan Hong Yang, and Ya Feng Li. "Development of Intelligent Winch Rope-Aligning System." Applied Mechanics and Materials 446-447 (November 2013): 1211–16. http://dx.doi.org/10.4028/www.scientific.net/amm.446-447.1211.

Full text

Abstract:

This paper developed an intelligent control system based on micro-computer in order to rope wire in a winch. It introduces the constituent parts and work principle of the system, analyzes moving direction rules of the rope-aligning device, calculating method of step number and speed regulating algorithm of the stepping motor. The system can adapt rope-aligning speed and distance to the wire diameter and the roller rotating speed. With good characteristic such as regulating speed quickly and smoothly, following roller rapidly and controlling itself intelligently, the system can be widely used i

APA, Harvard, Vancouver, ISO, and other styles

5

Ivanovskaya, Aleksandra V., Vladimir A. Zhukov, and Aleksei N. Ivanovskii. "Increasing the energy efficiency of a fishing vessel by estimating the motion parameters of a towed object." Russian Journal of Water Transport, no. 77 (December 20, 2023): 91–98. http://dx.doi.org/10.37890/jwt.vi77.417.

Full text

Abstract:

The optimal mode of towing fishing gear has a direct impact on the energy efficiency of the fishing vessel. To build the combined traction characteristics of the vessel and trawl systems, data are needed on the nominal moments on the winch and engine drum, as well as the traction force in the warp. Estimation of the movement parameters of the towed object will make it possible to haul warps without overloading the trawl winch and the main engine. The paper proposes a block diagram of the algorithm for estimating the motion parameters of a trawl system. Processing of the current measurements of

APA, Harvard, Vancouver, ISO, and other styles

6

SOLDATENKO, L., A. SHIPKO, and I. SHIPKO. "DEVELOPMENT OF THE SCHEME OF THE RIGGING AND ASSEMBLY INSTALLATION." Grain Products and Mixed Fodder’s 22, no. 3 (2023): 46–50. http://dx.doi.org/10.15673/gpmf.v22i3.2465.

Full text

Abstract:

In the conditions of reconstruction or technical re-equipment of grain storage and processing enterprises, there are cases of absence or impossibility of using the necessary universal lifting and transport means, in particular, construction tower or selfpropelled jib cranes at the installation sites. In such situations, they resort to the construction of specialized rigging and installation installations, which are based on the use of rigging and installation mechanisms, rigging devices and rigging equipment. The given sequence of actions, definitions and calculations at the same time practica

APA, Harvard, Vancouver, ISO, and other styles

7

Nedostup, Alexander Alekseevich, and Alexey Olegovich Razhev. "New theory for designing commercial fishing gears." Vestnik of Astrakhan State Technical University. Series: Fishing industry 2023, no. 2 (2023): 33–42. http://dx.doi.org/10.24143/2073-5529-2023-2-33-42.

Full text

Abstract:

The article presents a new theory of designing commercial fishing gear based on the use of the theory of similarity of multiphysical processes occurring in commercial fishing gear and their elements at all stages of operation, as well as digital twins of fishing vessels, fishing mechanisms. The new theory of designing tools for commercial fishing based on taking into account the multiphysical processes occurring in fishing units and fishing objects. Providing multiphysical processes, digitizing them on the basis of digital twins makes it possible to clarify the hydrodynamic coefficients of par

APA, Harvard, Vancouver, ISO, and other styles

8

Boyko, А. О., O. V. Naidenko, V. I. Tkach, and D. I. Kovalsky. "ISSUE OF ENERGY EFFICIENCY ASSESSMENT OF ELEVATORS ELECTRIC DRIVES." ELECTRICAL AND COMPUTER SYSTEMS, no. 41(117) (2024): 6–11. http://dx.doi.org/10.15276/eltecs.41.117.2024.1.

Full text

Abstract:

Abstract. The work deals with the possible assessment of the energy efficiency of modern passenger elevators. Special attention is paid to the issue of recuperation, as the most energy-efficient type of braking. A method is proposed that allows you to qualitatively and roughly estimate the possibility of recuperation in arbitrary elevator electric drives, based on the catalog parameters that are present in open sources. The limiting value of the equivalent efficiency coefficient of the elevator electromechanical system, at which there is no energy recovery in the "start-up-braking" cycle, was

APA, Harvard, Vancouver, ISO, and other styles

9

Kalyashov, Vitalij A., Il’ya S. Dolzhikov, Vladimir Ya Shapiro, Igor’ V. Grigor’ev, Ol’ga A. Kunitskaya, and Varvara P. Druz’yanova. "The Formation of a Track by the Propulsion of a Forestry Machine on the Slope of the Thawing Soil in the Permafrost Zone, Taking into Account the Effect of Solifluction." Lesnoy Zhurnal (Forestry Journal), no. 3 (June 10, 2024): 140–52. http://dx.doi.org/10.37482/0536-1036-2024-3-140-152.

Full text

Abstract:

In the Russian Federation, a significant part of the forest fund territory is located on permafrost. Many regions of the country have large reserves of mature and overmature commercial forests, and a significant part of these reserves are located in hard-to-reach places, not only due to the underdeveloped road network, but also due to the difficult terrain. Currently, the vast majority of timber harvesting in Russia is carried out using modern machine complexes, mainly including wheeled forestry machines of various layouts and purposes (harvesters, forwarders, skidders, etc.). At the same time

APA, Harvard, Vancouver, ISO, and other styles

10

Myers, Melvin, Robert Durborow, and Andrew Kane. "Gulf of Mexico Seafood Harvesters: Part 3. Potential Occupational Risk Reduction Measures." Safety 4, no. 3 (2018): 33. http://dx.doi.org/10.3390/safety4030033.

Full text

Abstract:

1. Background: Fishers face many occupational hazards that include a high risk of fatal and nonfatal injuries and a variety of adverse health effects. Our purpose is to provide an overview of potential countermeasures for the control of hazards that threaten the health and safety of Gulf of Mexico (GoM) fish harvesters. 2. Method: Search terms were used to identify relevant literature; two previous reviews regarding injuries and health risk factors also inform this review. 3. Results: Countermeasures against these hazards include winch guards, lifting devices, job redesign, non-slip decks and

APA, Harvard, Vancouver, ISO, and other styles

11

Zou, Dehua, Zhipeng Jiang, Lanlan Liu, Chenhao Dai, and Wei Jiang. "Design and Simulation of Autonomous Up-and-down System for Transmission Line Live Operation Robot with the UAV Assistance." Journal of Physics: Conference Series 2731, no. 1 (2024): 012007. http://dx.doi.org/10.1088/1742-6596/2731/1/012007.

Full text

Abstract:

Abstract Aiming at the current bottleneck problem that restricts the practical application of robot system engineering in transmission line live operation, in order to improve the on-line and off-loading efficiency of live working robots on transmission lines and improve the practical level of the robot system as a whole, this paper proposes a design and operation method of autonomous on-line and off-loading mechanism of double-arm live working robots based on UAV assistance. Firstly, the realization process of autonomous up-and-down of the robot was analyzed, based on which the structure of t

APA, Harvard, Vancouver, ISO, and other styles

12

Kafeel, Shaik. "Modelling and Fabrication of Tri-Head Gantry Crane Model." International Journal of Engineering and Advanced Technology (IJEAT) 14, no. 1 (2024): 23–27. https://doi.org/10.35940/ijeat.A4536.14011024.

Full text

Abstract:

<strong>Abstract:</strong> During the manufacturing process, various raw materials and finished goods have to be handled in manufacturing industries. As the shapes and material properties of each raw material / finished good to be handled are different, it gets difficult for a single-head crane to handle diverse materials. At present forklifts and hook-headed cranes are being used for this purpose, but it requires a lot of labor and time to handle the materials and finished goods due to miscellaneous work associated with this equipment. Looking at the present day’s industrial requirement

APA, Harvard, Vancouver, ISO, and other styles

13

Maneking, Junneifer Aldo, Joneidi Tamarol, and Fitria Fresty Lungari. "OPERASIONAL PUKAT CINCIN KM. MALBERS 02 DI PERAIRAN TELUK TOMINI PROVINSI GORONTALO." Jurnal Ilmiah Tindalung 6, no. 2 (2020): 61–66. http://dx.doi.org/10.54484/jit.v6i2.295.

Full text

Abstract:

Peningkatan efisiensi dan efektifitas operasi perangkapan ikan dengan pukat cincin diperlukan beberapa sarana dimana salah satunya yaitu dengan menggunakan alat bantu penangkapan ikan jenis rumpon. Selain rumpon dalam pengoperasiannya pukat cincin dilengkapi pula dengan perahu lampu. Penelitian ini dilaksanakan dengan metode deskriptif dengan dasar studi kasus dilapangan. Hasil penelitian menunjukan bahwa hasil tangkapan pukat cincin didominasi oleh ikan Layang (Decapterus sp), sebagian lagi ikan Cakalang (Katsuwonus pelamis) dan ikan Sunglir (Elegatis bipinnulatus). Dari hasil analisis data m

APA, Harvard, Vancouver, ISO, and other styles

14

Borushchak, L. O., and B. B. Vynnychuk. "IMPROVEMENT OF THE CONSTRUCTION AND COMPUTER DEVICE INVESTIGATION FOR THE PROCESSING OF BLOWOUT-PREVENTION HARDWARE EQUIPMENT." Scientific Bulletin of Ivano-Frankivsk National Technical University of Oil and Gas, no. 1(46) (June 26, 2019): 16–24. http://dx.doi.org/10.31471/1993-9965-2019-1(46)-16-24.

Full text

Abstract:

The research deals with the problem of blowout equipment test for tightness before implementation. The indicated equipment includes a stem, a system of pipelines with valves and a control system. The classic test procedure requires a mobile pumping installation that provides a pressure of 35 MPa.The cost of such tests is rather high. For testing without a pump unit, a design of a device for increased tightness has been developed, including a sealing unit of the mouth from the main column and a piston unit for creating high pressure in the test volume. Generation of a high pressure occurs by li

APA, Harvard, Vancouver, ISO, and other styles

15

Li, Shu Min. "Development & Design of Large-Tonnage and Great-Height Hydraulic Continuous and Synchronous Jack-Up System." Applied Mechanics and Materials 157-158 (February 2012): 577–80. http://dx.doi.org/10.4028/www.scientific.net/amm.157-158.577.

Full text

Abstract:

At present, as the increasing of ultra-large structures, the contradiction that domestic lifting equipments can not meet the requirement of ultra-large structure’s lifting has become increasingly prominent. Based on the need of ultra-large steel structures (offshore oil platforms) jack-up, using strength theory and finite element analysis, a hydraulic continuous jack-up system for ultra-large structures’ jack-up was studied in this article. A new control system, which combines mechanics, hydraulics and electrics, was presented. More particularly, the modules of speed control and multi-cylinder

APA, Harvard, Vancouver, ISO, and other styles

16

Sun, Qiaolei, Liang He, Ding Feng, Xinlong Chen, Liangliang Ding, and Yiliu Tu. "Modeling and analysis of structure parameters on the lifting force for power catwalk." Journal of Engineering, Design and Technology ahead-of-print, ahead-of-print (2020). http://dx.doi.org/10.1108/jedt-09-2018-0147.

Full text

Abstract:

Purpose As the excessive lifting force can lead to catwalk rollover and well site accidents, the lifting process boundary conditions and structural parameters have a significant effect lifting force, it is important to analysis the structural parameters on the maximum lifting force in the lifting process of power catwalk. Design/methodology/approach A new model is proposed to analyze the influence of structure parameters on its lifting force for lifting power catwalk in this paper, and the geometric and dynamic equations are established according to the different boundary conditions in differe

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!