Relevant bibliographies by topics / Wind Power Turbine

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Wind Power Turbine'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Wind Power Turbine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Wind Power Turbine"

1

Yohana, Eflita, MSK Tony Suryo U, Binawan Luhung, Mohamad Julian Reza, and M. Badruz Zaman. "Experimental Study of Wind Booster Addition for Savonius Vertical Wind Turbine of Two Blades Variations Using Low Wind Speed." E3S Web of Conferences 125 (2019): 14003. http://dx.doi.org/10.1051/e3sconf/201912514003.

Full text
Abstract:
The Wind turbine is a tool used in Wind Energy Conversion System (WECS). The wind turbine produces electricity by converting wind energy into kinetic energy and spinning to produce electricity. Vertical Axis Wind Turbine (VAWT) is designed to produce electricity from winds at low speeds. Vertical wind turbines have 2 types, they are wind turbine Savonius and Darrieus. This research is to know the effect of addition wind booster to Savonius vertical wind turbine with the variation 2 blades and 3 blades. Calculation the power generated by wind turbine using energy analysis method using the concept of the first law of thermodynamics. The result obtained is the highest value of blade power in Savonius wind turbine without wind booster (16.5 ± 1.9) W at wind speed 7 m/s with a tip speed ratio of 1.00 ± 0.01. While wind turbine Savonius with wind booster has the highest power (26.3 ± 1.6) W when the wind speed of 7 m/s with a tip speed ratio of 1.26 ± 0.01. The average value of vertical wind turbine power increases Savonius after wind booster use of 56%.
APA, Harvard, Vancouver, ISO, and other styles
2

He, Yi Ming, and Xian Yi Qian. "Design of Wind Power Turbine's Main Components and Computation of its Output Power." Applied Mechanics and Materials 195-196 (August 2012): 23–28. http://dx.doi.org/10.4028/www.scientific.net/amm.195-196.23.

Full text
Abstract:
We have mainly studied the main structure of wind power turbines components in accordance with the principle aerodynamics. We also have taken horizontal axis wind power turbine for example and studied the basic structure and producing technology about wheel, base and other equipments. We have computed the wind power turbines output power and efficiency, and compared with some kinds of different wind power turbines output power and efficiency. All what have studied is important to design wind power turbine.
APA, Harvard, Vancouver, ISO, and other styles
3

Rudianto, Daniel. "RANCANG BANGUN TURBIN ANGIN SAVONIUS 200 WATT." Conference SENATIK STT Adisutjipto Yogyakarta 2 (November 15, 2016): 71. http://dx.doi.org/10.28989/senatik.v2i0.35.

Full text
Abstract:
This study aimed to establish the type of Savonius wind turbines that capable of generating electric power of 200 Watts. This objective relates to Bantul District Government program which plans to build wind turbin generating electrical power (Pembangkit Listrik Tenaga Bayu, PLTB) 200 Watt as a backup power source for powering cooling fish caught by fishermen in the southern coast. Savonius Turbine chosen with consideration that it has simple construction so that the cost is not expensive, not depending on the direction of the wind, and is suitable for small power plants.Design of Savonius turbine blade has been completed, the turbine blade height 168 cm and a diameter of 55 cm. Blade turbine mounted on an arm along 55 cm from the turbine shaft and separate 120º. The turbine is supported by a 3-foot-tall turbines framework 2,5 m iron box 4 cm x 4 cm. The test simulated to determine the turbine rotation has been performed at varying wind speeds, i.e. 2 m /s, 4 m /s and 6 m /s.Based on test results, the turbine is capable of rotating an average of 54,2 rpm at a wind speed of 2 m /s; 86,8 rpm at a wind speed of 4 m /s; and 124,2 rpm at a wind speed of 6 m /s. These test results indicate that the Savonius turbines can be used to drive a generator producing the need of electrical energy
APA, Harvard, Vancouver, ISO, and other styles
4

Chung, P. D. "Evaluation of Reactive Power Support Capability of Wind Turbines." Engineering, Technology & Applied Science Research 10, no. 1 (February 3, 2020): 5211–16. http://dx.doi.org/10.48084/etasr.3260.

Full text
Abstract:
Reactive power plays an important role in the operation of power systems, especially in the case of wind energy integration. This paper aims to evaluate the reactive power support capability of wind turbines in both normal and voltage sag conditions. The three 2MW wind turbines studied are a fixed speed wind turbine and two variable speed wind turbines with full-scale and power-scale power converters. Comparison results indicate that at normal operation, the fixed speed wind turbine with a static synchronous compensator is able to consume the highest reactive power, while the variable speed wind turbine with full-scale power converter can supply the highest reactive power. In case of low voltage, the fixed speed wind turbine with the static synchronous compensator can support the highest reactive power if the static synchronous compensator’s capacity is similar to the wind turbine’s capacity, while if its capacity is equal to 25% of the generator’s capacity, the variable speed wind turbine with full-scale power converter has the best performance.
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Ya-ling, Yin-peng Liu, and Xiao-fei Sun. "The Active Frequency Control Strategy of the Wind Power Based on Model Predictive Control." Complexity 2021 (May 27, 2021): 1–11. http://dx.doi.org/10.1155/2021/8834234.

Full text
Abstract:
In this paper, an active frequency control strategy of wind turbines based on model predictive control is proposed by using the power margin of wind turbines operating in load shedding mode. The frequency response model of the microgrid system with the load shedding of the wind turbines is used to predict the output power and system frequency deviation of the wind turbine. According to the prediction information, the output power control signal of the model predictive controller in the wind turbine can be optimized. On this basis, a wind turbine active participation frequency control strategy based on model predictive control is designed by rolling prediction and optimization. The wind turbine power control signal after the strategy is used to adjust the output power of the wind turbine and balance the change of the active power of the system to reduce the frequency deviation.
APA, Harvard, Vancouver, ISO, and other styles
6

Cho, Soo-Yong, Sang-Kyu Choi, Jin-Gyun Kim, and Chong-Hyun Cho. "An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines." Advances in Mechanical Engineering 10, no. 9 (September 2018): 168781401879954. http://dx.doi.org/10.1177/1687814018799543.

Full text
Abstract:
In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.
APA, Harvard, Vancouver, ISO, and other styles
7

Demurtas, Giorgio, Troels Friis Pedersen, and Rozenn Wagner. "Nacelle power curve measurement with spinner anemometer and uncertainty evaluation." Wind Energy Science 2, no. 1 (March 2, 2017): 97–114. http://dx.doi.org/10.5194/wes-2-97-2017.

Full text
Abstract:
Abstract. The objective of this investigation was to verify the feasibility of using the spinner anemometer calibration and nacelle transfer function determined on one reference wind turbine, in order to assess the power performance of a second identical turbine. An experiment was set up with a met mast in a position suitable to measure the power curve of the two wind turbines, both equipped with a spinner anemometer. An IEC 61400-12-1-compliant power curve was then measured for both wind turbines using the met mast. The NTF (nacelle transfer function) was measured on the reference wind turbine and then applied to both turbines to calculate the free wind speed. For each of the two wind turbines, the power curve (PC) was measured with the met mast and the nacelle power curve (NPC) with the spinner anemometer. Four power curves (two PCs and two NPCs) were compared in terms of AEP (annual energy production) for a Rayleigh wind speed probability distribution. For each wind turbine, the NPC agreed with the corresponding PC within 0.10 % of AEP for the reference wind turbine and within 0.38 % for the second wind turbine, for a mean wind speed of 8 m s−1.
APA, Harvard, Vancouver, ISO, and other styles
8

Seifert, Janna Kristina, Martin Kraft, Martin Kühn, and Laura J. Lukassen. "Correlations of power output fluctuations in an offshore wind farm using high-resolution SCADA data." Wind Energy Science 6, no. 4 (July 23, 2021): 997–1014. http://dx.doi.org/10.5194/wes-6-997-2021.

Full text
Abstract:
Abstract. Space–time correlations of power output fluctuations of wind turbine pairs provide information on the flow conditions within a wind farm and the interactions of wind turbines. Such information can play an essential role in controlling wind turbines and short-term load or power forecasting. However, the challenges of analysing correlations of power output fluctuations in a wind farm are the highly varying flow conditions. Here, we present an approach to investigate space–time correlations of power output fluctuations of streamwise-aligned wind turbine pairs based on high-resolution supervisory control and data acquisition (SCADA) data. The proposed approach overcomes the challenge of spatially variable and temporally variable flow conditions within the wind farm. We analyse the influences of the different statistics of the power output of wind turbines on the correlations of power output fluctuations based on 8 months of measurements from an offshore wind farm with 80 wind turbines. First, we assess the effect of the wind direction on the correlations of power output fluctuations of wind turbine pairs. We show that the correlations are highest for the streamwise-aligned wind turbine pairs and decrease when the mean wind direction changes its angle to be more perpendicular to the pair. Further, we show that the correlations for streamwise-aligned wind turbine pairs depend on the location of the wind turbines within the wind farm and on their inflow conditions (free stream or wake). Our primary result is that the standard deviations of the power output fluctuations and the normalised power difference of the wind turbines in a pair can characterise the correlations of power output fluctuations of streamwise-aligned wind turbine pairs. Further, we show that clustering can be used to identify different correlation curves. For this, we employ the data-driven k-means clustering algorithm to cluster the standard deviations of the power output fluctuations of the wind turbines and the normalised power difference of the wind turbines in a pair. Thereby, wind turbine pairs with similar power output fluctuation correlations are clustered independently from their location. With this, we account for the highly variable flow conditions inside a wind farm, which unpredictably influence the correlations.
APA, Harvard, Vancouver, ISO, and other styles
9

Knysh, L. I. "ON POTENTIAL OF USING WIND TURBINES WITH COAXIAL WIND ROTORS FOR AUTONOMOUS POWER SUPPLY." Alternative Energy and Ecology (ISJAEE), no. 25-30 (December 7, 2018): 25–33. http://dx.doi.org/10.15518/isjaee.2018.25-30.025-033.

Full text
Abstract:
The paper presents the experimental research results for the horizontal-axis wind turbine with coaxial wind rotors. It is assumed that such coaxial layout of the wind turbine can be used for designing of the wind energy systems with relatively low capacity and limited location area since the coaxial systems have advantages in overall dimensions and maximum using of the swept area. Possibility of coaxial horizontal-axis wind turbines usage is determined by positive or negative effect of turbines on each other. Literature review shows that closely spaced wind turbines can generally improve flow characteristics under certain conditions and consequently increase wind energy system efficiency. We have carried out the experiments in T-5 wind tunnel with two coaxial model two-bladed wind turbines which rotate in opposite directions. The generator of the first turbine and first turbine itself are located on the same shaft in the test section of wind tunnel. The second generator is in a lower compartment of the experimental setup and is connected by the transmission. We have measured the dynamic, energy and frequency characteristics of wind energy systems based on created experimental setup. A Pitot tube and automatic metering devises have measured the dynamic parameters and energy performance respectively. A frequency counter has saved all of the data obtained with the laser frequency measurement technique. The experiment has some specific technical features so the data received need to be corrected. The coaxial wind turbine power has decreased in comparison to isolated wind turbine at low wind speed. The return flows reinforce turbulence so wind speed falls. If wind speed increases, the impact of the return flows decreases, the coaxial wind turbine capacity significantly grows and exceeds isolated turbine capacity. The possibility of using wind turbines with coaxial wind rotors for autonomous power supply is shown. Such wind turbines are perspective and require more detailed analysis.
APA, Harvard, Vancouver, ISO, and other styles
10

Raina, Faisal Mushtaq, and Gagan Deep Yadav. "Frequency Regulation in Wind Turbine and Steam Turbine based Power System." International Journal of Trend in Scientific Research and Development Volume-1, Issue-6 (October 31, 2017): 197–205. http://dx.doi.org/10.31142/ijtsrd2412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Wind Power Turbine"

1

Wilmshurst, Stephen Michael Brand. "Wind turbine performance and dynamics." Thesis, University of Cambridge, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.236111.

Full text
Abstract:
The work described in the dissertation consists of various experimental investigations involving a 5 metre diameter horizontal-axis wind turbine at the Cambridge field test site and a model wind turbine in the low-speed wind tunnel at the Central Electricity Research Laboratories. The first chapter is introductory, summarising previous work by the author's research group and placing the present work in its wider context. The second chapter describes measurements and analysis of the problem of tower shadow for a downwind turbine - the 5m machine - including the use of a streamlined fairing to alleviate the problem. There follow three chapters relating to the broad area of wind turbine performance. The first of these reports how power measurements made in two different ways have been used to define the performance of the 5m machine, giving results in good agreement with theoretical predictions. The next discussed the use of blade-mounted spoilers as a control mechanism and describes experiments which have been carried out with spoilers of a simple design. Chapter 5 concerns the subject of control strategies. Both computer simulation and experimental results are presented for several different operating strategies, with particular attention to the impact on power production. The final chapter describes work carried out in a wind tunnel using a small model turbine. A comprehensive investigation of the model's wake has been undertaken and is analysed with reference to blade loading, ambient turbulence and downstream development.
APA, Harvard, Vancouver, ISO, and other styles
2

Dosset, Pablo. "Urban Wind Power : Installation of an Urban Wind Power turbine in Polhemsskolan in Gävle." Thesis, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-760.

Full text
Abstract:

Urban wind power is not too developed yet. Only some years ago some countries started to be aware of the important source of energy that can be used within built-up areas. The U.K., the Netherland, France and Italy are already working on it, but they are still far away to reach models and equations that can be useful for any situation.

An urban turbine is going to be installed in Gävle, Sweden, in the roof of Polhemsskolan. Therefore, the wind velocity should be found out to come up with some results about the energy yield. But some problems appear when try to estimate that velocity.

To calculate this velocity three different ways can be used. They are Mathematical models, Measurements and Simulations or Computational Fluid Dynamic (CFD) calculations. All of them are quite difficult to use. Both mathematical models and CFD are very expensive as well as they need too much time to give a result. In addition, the area where the rotor is going to be installed is quite strange and therefore, it is even more difficult to put all the data in the mathematical model or CFD. On the other hand, measurements were almost impossible to carry on. The measurement of the wind velocity should be done during one year due to the big differences in that value depending on the season; winter, summer... depending on the weather; cloudy, sunny and so on. This thesis was only four months long and that was not enough to do it. It has been tried too to use any measurements that could be in any weather stations in the surrounding of Gävle. Nothing was found. No wind velocity measurements have been made in this area.

Hence, different books and reports about this topic have been study quite depth. Most of them from the U.K. Estimations and assumptions were taking into account to come up with different solutions to make easier in the future to calculate an energy yield when measurements will be done.

APA, Harvard, Vancouver, ISO, and other styles
3

Simmons, Anton Dominic. "A comparison of wind turbine control policies." Thesis, Imperial College London, 1993. http://hdl.handle.net/10044/1/7447.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Edinger, Chad L. "Wind turbine capacity planning approximations for northwest United States utilities." Online access for everyone, 2008. http://www.dissertations.wsu.edu/Thesis/Spring2008/c_edinger_0032608.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Howard, Dustin F. "Short-circuit currents in wind-turbine generator networks." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/50361.

Full text
Abstract:
Protection of both the wind plant and the interconnecting transmission system during short-circuit faults is imperative for maintaining system structural integrity and reliability. The circuit breakers and protective relays used to protect the power system during such events are designed based upon calculations of the current that will flow in the circuit during the fault. Sequence-network models of various power-system components, such as synchronous generators, transformers, transmission lines, etc., are often used to perform these calculations. However, there are no such models widely accepted for certain types of wind-turbine generators used in modern wind plants. The problem with developing sequence-network models of wind plants is that several different wind-turbine generator designs exist; yet, each exhibit very different short-circuit behavior. Therefore, a “one size fits all” approach is not appropriate for modeling wind plants, as has been the case for conventional power plants based on synchronous-generator technology. Further, many of the newer wind-turbine designs contain proprietary controls that affect the short-circuit behavior, and wind-turbine manufacturers are often not willing to disclose these controls. Thus, protection engineers do not have a standard or other well-established model for calculating short-circuit currents in power systems with wind plants. Therefore, the research described in this dissertation involves the development of such models for calculating short-circuit currents from wind-turbine generators. The focus of this dissertation is on the four existing wind-turbine generator designs (identified as Types 1 – 4). Only AC-transmission-interconnected wind-turbine generators are considered in this dissertation. The primary objective of this research is the development of sequence-network models, which are frequency-domain analysis tools, for each wind-turbine generator design. The time-domain behavior of each wind-turbine generator is thoroughly analyzed through transient simulations, experimental tests on scaled wind-turbine generator test beds, and solutions to the system dynamic equations. These time-domain analyses are used to support the development of the sequence-network models.
APA, Harvard, Vancouver, ISO, and other styles
6

Beattie, A. "Wind turbine power performance assessment under real conditions." Thesis, Loughborough University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.520497.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rawlinson-Smith, R. I. "Computational Study of Stalled Wind Turbine Rotor Performance." Thesis, Cranfield University, 1991. http://dspace.lib.cranfield.ac.uk/handle/1826/4691.

Full text
Abstract:
Simplification of the aerodynamic control of large horizontal axis wind turbines (HAWTs) has been identified as an important step towards improved reliability and reduced cost. At present the majority of large HMrrs use active control to regulate power and loads. A simpler strategy is to use the inherent stalling of the rotor blades in high winds to limit power and loads. Unfortunately the performance of stall regulated HAWTs 1S poorly understood; current performance models often fail to correctly predict peak power levels. The benefits of passive control of power and loads cannot be utilised because of this uncertainty. This study examines the possible reasons for the poor performance of current prediction techniques 1n high winds with the objective of fonmulating a new model. The available experimental evidence suggests that rotor stall is caused by turbulent separation at the rear of the blade aerofoil, growing in extent from the root in increasing wind. This 'picture' of the stalling HAW! rotor forms the basis of the approach. The new model consists of a prescribed vortex wake, first order panel method (extended to represent the viscous region of trailing edge separation) and three dimensional integral boundary layer directly coupled in an iterative scheme. A sensitivity study of rotor indicates that the most important performance to wake geometry factor is the rate at which the wake is convected downstream. However, it is found that stalled power levels are insensitive to wake geometry; the study concludes that the problem of poor prediction of high wind performance lies on the rotor blades. Before using the complete code to calculate the performance of a rotor it 1S first tuned for the aerofoils used on the blade. Aerofoil perfonmance characteristics measured in a wind tunnel are synthesised by the model. Ideally these characteristics should include measured pressure profiles below and above stall. Validation of the complete code against detailed measurements taken under controlled conditions on a three metre diameter machine indicates significant differences in the perfonmance of aerofoil sections on a wind turbine blade when compared to the same section when tested in a wind tunnel. Derived lift coefficients show a reduced lift curve slope and more gentle delayed stall. Similar results are found when the code is applied to two Danish stall regulated machines. These two machines although having very similar geometries and using the same family of aerofoils do however show differences in derived post stall drag. This is thought to be due to the different thickness distributions of the two rotors. The validation and applications of the new model show that it can accurately predict the peak power level of stall regulated machines.
APA, Harvard, Vancouver, ISO, and other styles
8

Johnston, Mark. "Static and modal analysis of wind turbine towers." Thesis, De Montfort University, 1999. http://hdl.handle.net/2086/4184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lloyd, Simon H. "Variable speed control of a small wind turbine." Thesis, Loughborough University, 1998. https://dspace.lboro.ac.uk/2134/14376.

Full text
Abstract:
An electronic controller has been developed for a wind turbine which uses a passive pitching mechanism and a permanent magnet generator. The turbine rotor is a 3 bladed, down wind horizontal axis design with a diameter of 3.4m. The machine, manufactured by Proven Engineering Ltd., produces 2.2kW at a wind speed of 12m/ s and a rotor speed of 30Orpm. Passive regulation is achieved through a variation of blade pitch controlled by balancing the aerodynamic, centrifugal and spring forces acting on each blade. A production machine has been instrumented and laboratory and field test data collected; from this data a mathematical model has been derived. A power electronic interface (DC-DC booster) was designed and built to transform the generator voltage to a fixed DC voltage. A controlled load is used together with feedback to the booster to set an appropriate load resistance according to operating conditions. Current demand from the generator (used in the control) is derived either from the difference between the rotor speed and a reference speed, or directly as a function of the rotor speed (feed-forward control). This thesis deals with the design and testing of the 3 compensators which govern the wind turbine control using both simulated and measured results. The overall objective of the controller is to maximise the energy yield from the wind turbine, subject to realistic constraints imposed by the power electronic design in the context of this particular design.
APA, Harvard, Vancouver, ISO, and other styles
10

Olivieri, David Allen. "Design and testing of a concentrator wind turbine." Thesis, Open University, 1991. http://oro.open.ac.uk/54560/.

Full text
Abstract:
Wind energy, being an indirect form of solar energy would initially seem a very promising form of energy. Unfortunately, it suffers from the problem of dilution. Wind turbine designers naturally try to compensate for this by increasing the size of the rotor to capture more of the kinetic energy of the wind. A major constraint in conventional wind turbine design is the reduction in rotational speed as the size of the rotor is increased. This means expensive gear boxes are unavoidable. The rotor also becomes considerably more complicated in design and heavier as the size increases, to mitigate working stresses. Flow concentrators have been investigated in an attempt to alleviate wind turbine design problems, but flow concentrators usually incur the expense of high structural weight and size. The Helical Vortex Wind Concentrator (HVWC) is a recent addition to the list of flow concentrator types and its economic potential is, as yet unknown. The principle of the HVWC has been demonstrated in a series of wind tunnel tests. The wind tunnel tests involved a direct comparison between the performance of a wind turbine with and without an HVWC attached. During these tests a definite increase in power out was observed when the concentrator was attached to the wind turbine. Previous to these successful wind tunnel tests, other wind tunnel and field tests had been conducted on less successful designs. These other tests were important in the development of the current theory and design or the HVWC. Future research will need to investigate both physical and economic limitations of this type of wind concentrator.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Wind Power Turbine"

1

Wind turbine technology. Boca Raton, FL: CRC Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wind turbine technology. Clifton Park, NY: Delmar, Cengage Learning, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tong, Wei. Wind power generation and wind turbine design. Southampton: WIT Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Thomsen, Kenneth. Fatigue loads on a pitch regulated wind turbine operating in a coastal wind turbine array. Roskilde, Denmark: Risø National Laboratory, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li︠a︡tkher, V. M. Wind power: Turbine design, selection, and optimization. Hoboken, New Jersey: Scrivener Publishing, Wiley, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sørensen, Poul. Frequency domain modelling of wind turbine structures. Roskilde: Risø National Laboratory, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wind turbine manufacturing in the U.S.: Developments and considerations. Hauppauge, N.Y: Nova Science Publisher's, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wind turbine service technician. Ann Arbor, Mich: Cherry Lake Pub., 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Innovation in wind turbine design. Hoboken, N.J: Wiley, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Inc, Kenetech Windpower. Direct drive wind turbine feasibility study. Palo Alto, CA: Electric Power Research Institute, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Wind Power Turbine"

1

Backwell, Ben. "Turbine manufacturers in trouble." In Wind Power, 128–42. 2nd edition. | Abingdon, Oxon ; New York, NY : Routledge, 2018.: Routledge, 2017. http://dx.doi.org/10.4324/9781315112534-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Backwell, Ben. "Challenges for the wind-turbine industry." In Wind Power, 170–91. 2nd edition. | Abingdon, Oxon ; New York, NY : Routledge, 2018.: Routledge, 2017. http://dx.doi.org/10.4324/9781315112534-11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lubosny, Zbigniew. "Wind Turbine Generator Systems." In Power Systems, 5–18. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-10944-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Haake, Gerrit, and Annette Hofmann. "The ″Exclusively Offshore″ Wind Turbine." In Sea – Wind – Power, 91–100. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-53179-2_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zheng Li, Jeremy. "Wind Power Turbine System." In CAD, 3D Modeling, Engineering Analysis, and Prototype Experimentation, 27–37. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05921-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gasch, Robert, and Jochen Twele. "Wind turbine operation at the interconnected grid." In Wind Power Plants, 461–79. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-22938-1_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rekioua, Djamila. "Control of Wind Turbine Systems." In Wind Power Electric Systems, 133–61. London: Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-6425-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Feng, Cong, and Jie Zhang. "Wind Power and Ramp Forecasting for Grid Integration." In Advanced Wind Turbine Technology, 299–315. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-78166-2_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Akhmatov, Vladislav. "Full-Scale Verification of Dynamic Wind Turbine Models." In Wind Power in Power Systems, 603–27. Chichester, UK: John Wiley & Sons, Ltd, 2005. http://dx.doi.org/10.1002/0470012684.ch27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Akhmatov, Vladislav. "Full-Scale Verification of Dynamic Wind Turbine Models." In Wind Power in Power Systems, 865–89. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119941842.ch38.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Wind Power Turbine"

1

Yan, Pei, Qian Zheng, and Chen Niya. "Wind power forecasting considering wind turbine condition." In 2015 IEEE Innovative Smart Grid Technologies - Asia (ISGT ASIA). IEEE, 2015. http://dx.doi.org/10.1109/isgt-asia.2015.7387115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Korobatov, D. V., E. A. Sirotkin, A. O. Troickiy, and E. V. Solomin. "Wind turbine power plant control." In 2016 Dynamics of Systems, Mechanisms and Machines (Dynamics). IEEE, 2016. http://dx.doi.org/10.1109/dynamics.2016.7819031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zalkind, Daniel S., and Lucy Y. Pao. "Constrained Wind Turbine Power Control." In 2019 American Control Conference (ACC). IEEE, 2019. http://dx.doi.org/10.23919/acc.2019.8814860.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fitches, P. "Small battery charging wind turbine systems." In IEE Colloquium on Small Wind Power Systems. IEE, 1996. http://dx.doi.org/10.1049/ic:19961006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Qiu Yingning, Feng Yanhui, and Sun Juan. "Wind Turbine Fault Simulation." In 2nd IET Renewable Power Generation Conference (RPG 2013). Institution of Engineering and Technology, 2013. http://dx.doi.org/10.1049/cp.2013.1820.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Garg, Himani, Navneet Sharma, and Ratna Dahiya. "Design and Simulation of Wind Turbine Emulator." In 2018 IEEE 8th Power India International Conference (PIICON). IEEE, 2018. http://dx.doi.org/10.1109/poweri.2018.8704424.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Erdenebat, Munkhtuya, Chae-Joo Moon, and Zagdkhorol Bayasgalan. "Wind Turbine Power Control for Turbulence Wind Speed." In 2020 IEEE Region 10 Symposium (TENSYMP). IEEE, 2020. http://dx.doi.org/10.1109/tensymp50017.2020.9230879.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Menon, Shruti Mohandas, and Navid Goudarzi. "Structural Analysis of a Novel Ducted Wind Turbine." In ASME 2017 Power Conference Joint With ICOPE-17 collocated with the ASME 2017 11th International Conference on Energy Sustainability, the ASME 2017 15th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2017 Nuclear Forum. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/power-icope2017-3392.

Full text
Abstract:
Renewable energy technologies offer a competitive cost of energy values in large-scale power generations compared with those from traditional energy resources. In 2015, residential and commercial buildings consumed 40% of total US energy consumption. Short and long-term plans have been developed to further employing wind energy technologies for electricity generation. However, there is a significant gap in developing reliable utility-scaled distributed wind energy converters. Employing novel low-cost wind harnessing technologies in these sectors supports the renewable-energy expansion plans. A novel ducted wind turbine technology, called Wind Tower, for capturing wind power is designed and developed in earlier works. In this work, the Wind Tower structural analysis is conducted to obtain insights to the required materials and optimum components’ dimensions at an expanded range of wind flow regimes. A stable and robust design addresses the need for developing an optimum solution to obtain a maximum output power generation at a minimum cost of energy. It will lead to a maximum return on investment. The results demonstrate a superior structural performance of the Wind Tower Technology. It withstands pressure loads from high wind speed when it is installed as a standalone structure.
APA, Harvard, Vancouver, ISO, and other styles
9

Xu Ke, Hu Minqiang, Yan RongYan, and W. Du. "Wind turbine simulator using PMSM." In 2007 42nd International Universities Power Engineering Conference. IEEE, 2007. http://dx.doi.org/10.1109/upec.2007.4469040.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Macready, A. R., and C. E. Coates. "Low cost wind turbine controller." In 2007 Australasian Universities Power Engineering Conference (AUPEC). IEEE, 2007. http://dx.doi.org/10.1109/aupec.2007.4548062.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Wind Power Turbine"

1

van Dam, J., and D. Jager. Wind Turbine Generator System Power Performance Test Report for the ARE442 Wind Turbine. Office of Scientific and Technical Information (OSTI), February 2010. http://dx.doi.org/10.2172/972931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Curtis, A., and V. Gevorgian. Wind Turbine Generator System Power Quality Test Report for the Gaia Wind 11-kW Wind Turbine. Office of Scientific and Technical Information (OSTI), July 2011. http://dx.doi.org/10.2172/1020598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Huskey, A., A. Bowen, and D. Jager. Wind Turbine Generator System Power Performance Test Report for the Gaia-Wind 11-kW Wind Turbine. Office of Scientific and Technical Information (OSTI), December 2009. http://dx.doi.org/10.2172/969721.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, J., A. Huskey, D. Jager, and J. Hur. Wind Turbine Generator System Power Performance Test Report for the Entegrity EW50 Wind Turbine. Office of Scientific and Technical Information (OSTI), May 2011. http://dx.doi.org/10.2172/1015507.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huskey, A., A. Bowen, and D. Jager. Wind Turbine Generator System Duration Test Report for the Mariah Power Windspire Wind Turbine. Office of Scientific and Technical Information (OSTI), May 2010. http://dx.doi.org/10.2172/981559.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huskey, A., A. Bowen, and D. Jager. Wind Turbinie Generator System Power Performance Test Report for the Mariah Windspire 1-kW Wind Turbine. Office of Scientific and Technical Information (OSTI), December 2009. http://dx.doi.org/10.2172/969714.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mendoza, I., and J. Hur. Power Performance Test Report for the SWIFT Wind Turbine. Office of Scientific and Technical Information (OSTI), December 2012. http://dx.doi.org/10.2172/1059138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Roadman, J., M. Murphy, and J. van Dam. Power Performance Test Report for the Viryd CS8 Wind Turbine. Office of Scientific and Technical Information (OSTI), December 2012. http://dx.doi.org/10.2172/1059164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

DeLucia, Dominic. A Parametric Study on Power Variation for Model Wind Turbine Arrays. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.1120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Griffin, D. A. Investigation of vortex generators for augmentation of wind turbine power performance. Office of Scientific and Technical Information (OSTI), December 1996. http://dx.doi.org/10.2172/414367.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Wind Power Turbine' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography