Log in

Relevant bibliographies by topics / Wireless Asynchronous Transfer Mode (ATM)

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Wireless Asynchronous Transfer Mode (ATM)'

Author: Grafiati

Published: 4 June 2025

Last updated: 15 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Wireless Asynchronous Transfer Mode (ATM).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Wireless Asynchronous Transfer Mode (ATM)"

1

Sarkar, Nurul I., Ritchie Qi, and Akbar Hossain. "Performance Studies of FTP, Voice and Video over ATM-Wireless Backbone Network." International Journal of Advanced Pervasive and Ubiquitous Computing 7, no. 3 (2015): 38–54. http://dx.doi.org/10.4018/ijapuc.2015070104.

Full text

Abstract:

Asynchronous Transfer Mode (ATM) is a high-speed networking technology designed to support real-time applications such as voice and video over both wired and wireless networks. This type of network is being used by medium-to-large organizations and the Internet service providers as backbone network to carry data traffic over long-distance with a guaranteed quality of service (QoS). The guaranteed QoS is achieved through a point-to-point link between end users. While the performance of ATM network over wired network has been studied extensively, the performance of real-time traffic over an ATM-Wireless extension has not been fully explored yet. It is useful to be able to compare the performance of ATM network with and without wireless extension against various network performance metrics to find out the effect of wireless extension on system performance.

APA, Harvard, Vancouver, ISO, and other styles

2

Barton, Melbourne, and Li Fung Chang. "Error protection for ATM‐based wireless networking systems[1]Copyright of this work retained by Bellcore, but permission to publish it is granted to the Publisher." Journal of High Speed Networks 8, no. 2 (1999): 87–100. https://doi.org/10.3233/hsn-1999-160.

Full text

Abstract:

Variable rate error protection is required to support the broad range of quality of service (QoS) requirements for multimedia services in future Asynchronous Transfer Mode (ATM)‐based wireless networking systems known as wireless ATM (WATM). In this paper, the performance of a rate‐compatible punctured convolution (RCPC) coding scheme is examined. It provides adaptive forward error correction (FEC) at the physical (PHY) layer of the (non‐ATM) wireless access segment, that interworks with the fixed ATM transport network. Bit error rate (BER) performance of the RCPC codes is evaluated for a range of wireless protocol data unit (PDU) formats. The throughput is also compared with well known Bose‐Chaudhuri‐Hocquenghem (BCH) and Reed‐Solomon (RS) block codes. An hybrid automatic repeat request (ARQ)/FEC protocol that uses RCPC coding to distribute error protection between the wireless PHY and data link control (DLC) layers is also presented. Issues relating to complexity/cost trade‐off, and effects of multipath fading, require further study.

APA, Harvard, Vancouver, ISO, and other styles

3

Sameera, Sadey Shijer, and H. Sabry Ahmad. "Analysis of performance parameters for wireless network using switching multiple access control method." Eastern-European Journal of Enterprise Technologies 4, no. 9 (112) (2021): 6–14. https://doi.org/10.15587/1729-4061.2021.238457.

Full text

Abstract:

The developments of wireless networks have directed to search for opportunities of a broad diversity of improved and new networking contributions. Wireless Asynchronous Transfer Mode (ATM) is a non-synchronous or random mode of transferring information. The advantages of circuit switching include dedicated connections and guaranteed traffic parameters and the benefits of packet switching are the efficiency at the physical layer and a more cost-effective design. ATM is the only protocol that offers the best of both communication methods. Although the Variable Bit-Rate (VBR) transmission presents a promising prospective of stable data quality, it is usually accompanied by network traffic overload and cell packet loss, which extensively weakens that potential. This work overcomes these concerns by developing a switching-based multiple access control model to improve the data transmission performance of wireless ATM. Therefore, this work discusses the effectiveness of the developed approach to minimize the cell packet losses and network traffic overload in wireless ATM. Three control access is processed; polling, token passing, and reservation algorithms for collision avoidance. The reservation stage reserves the data before sending, which includes two timeline intervals; a fixed-time reservation period, and variable data transmission interval. Using OPNET 10.5, the results show that the presented switching-based multiple access control model can achieve a throughput value of 98.3 %, data transmission delay of about 40.2 ms, and 0.024 % of packet losses during data transmission between the source and destination. It is demonstrated that the introduced method effectively transmits information without creating any network complexity and delay

APA, Harvard, Vancouver, ISO, and other styles

4

Shijer, Sameera Sadey, and Ahmad H. Sabry. "Analysis of performance parameters for wireless network using switching multiple access control method." Eastern-European Journal of Enterprise Technologies 4, no. 9(112) (2021): 6–14. http://dx.doi.org/10.15587/1729-4061.2021.238457.

Full text

Abstract:

The developments of wireless networks have directed to search for opportunities of a broad diversity of improved and new networking contributions. Wireless Asynchronous Transfer Mode (ATM) is a non-synchronous or random mode of transferring information. The advantages of circuit switching include dedicated connections and guaranteed traffic parameters and the benefits of packet switching are the efficiency at the physical layer and a more cost-effective design. ATM is the only protocol that offers the best of both communication methods. Although the Variable Bit-Rate (VBR) transmission presents a promising prospective of stable data quality, it is usually accompanied by network traffic overload and cell packet loss, which extensively weakens that potential. This work overcomes these concerns by developing a switching-based multiple access control model to improve the data transmission performance of wireless ATM. Therefore, this work discusses the effectiveness of the developed approach to minimize the cell packet losses and network traffic overload in wireless ATM. Three control access is processed; polling, token passing, and reservation algorithms for collision avoidance. The reservation stage reserves the data before sending, which includes two timeline intervals; a fixed-time reservation period, and variable data transmission interval. Using OPNET 10.5, the results show that the presented switching-based multiple access control model can achieve a throughput value of 98.3 %, data transmission delay of about 40.2 ms, and 0.024 % of packet losses during data transmission between the source and destination. It is demonstrated that the introduced method effectively transmits information without creating any network complexity and delay

APA, Harvard, Vancouver, ISO, and other styles

5

Sheu, Shiann‐Tsong. "Reducing clean cell loss rate in wireless ATM networks." Journal of High Speed Networks 8, no. 2 (1999): 101–11. https://doi.org/10.3233/hsn-1999-161.

Full text

Abstract:

In wireless asynchronous transfer mode (ATM) networks, the bit error rate is high and burst errors may occur in transmission due to jamming and fading. When single‐bit error occurs in cell header, it can be easily corrected by the CRC‐8 code in the HEC (Header Error Correction) field. However, HEC can not recover the cells with burst errors, and they will be lost or mis‐routed accordingly. A strategy to spread each bit of a header field over the entire data field has been proposed to reduce the cell loss probability in wireless ATM networks. In such method, most burst errors are transformed into single‐bit errors in header and the HEC is able to recover it. Intuitively, each corrected cell has a higher probability to contain incorrect payload due to burst errors. When network becomes congested, these dirty cells should be dropped first to reduce the number of error cells received by receiver. Meanwhile, the number of retransmitted cells is also reduced. In this paper, the cell payload error probability of a corrected cell is analyzed. A simple cell priority swapping mechanism and the cell discarding strategy are also introduced to reduce the clean cell loss rate on wireless ATM networks. To precisely recognize dirty cells, an efficient hybrid data/header interleaving strategy is proposed. The performance of proposed strategies are investigated by simulation. The simulation results show that the proposed strategies substantially reducing the clean cell loss rate.

APA, Harvard, Vancouver, ISO, and other styles

6

Ismail, Adzrool Idzwan bin, Mohd Amirul Helmi Ismail, and Izwah Ismail. "Towards mobility management in next-generation wireless systems networks from a multi-objective perspective." International Journal of Innovative Research and Scientific Studies 8, no. 2 (2025): 4289–98. https://doi.org/10.53894/ijirss.v8i2.6301.

Full text

Abstract:

The rapid expansion of mobile applications and consumer demand for uninterrupted connectivity necessitate advancements in mobility management within next-generation wireless networks. This paper evaluates various mobility management protocols, including satellite networks, wireless asynchronous transfer mode (ATM), mobile Internet Protocol (IP), and public land mobile networks (PLMN). Through a comprehensive multi-objective analysis, we explore the integration and comparative effectiveness of these protocols. Our findings indicate distinct performance trade-offs among mobility management strategies. Specifically, strategies based on registration areas outperform those utilizing reporting cells, except in scenarios characterized by high paging costs. Moreover, we demonstrate that various paging methods excel in different regions of the objective space, with blanket paging consistently identified as the least efficient. The improvements in network design technologies notably enhance the capabilities of mobile graphy, facilitating higher-quality multimedia streaming, quicker processing of high-resolution content, and better utilization of mobile graphy hardware such as advanced camera sensors and graphics processors. This study guides network operators and mobile graphy practitioners in selecting optimal strategies aligned with their specific operational requirements, highlighting unresolved issues critical to future network evolution.

APA, Harvard, Vancouver, ISO, and other styles

7

Rudin, Harry. "The ATM—Asynchronous transfer mode." Computer Networks and ISDN Systems 24, no. 4 (1992): 277–78. http://dx.doi.org/10.1016/0169-7552(92)90113-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Minzer, S. E. "Broadband ISDN and asynchronous transfer mode (ATM)." IEEE Communications Magazine 27, no. 9 (1989): 17–24. http://dx.doi.org/10.1109/35.35508.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Laeticia, Onyejegbu, and Okafor Nkiru. "Congestion Control in Asynchronous Transfer Mode (ATM) Network." International Journal of Computer Applications 142, no. 4 (2016): 11–15. http://dx.doi.org/10.5120/ijca2016909736.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Rizk, M. R. M., H. Rashwan, and A. Abdel Aziz. "A Modified Asynchronous Transfer Mode Fuzzy Policer." Sultan Qaboos University Journal for Science [SQUJS] 7, no. 1 (2002): 137. http://dx.doi.org/10.24200/squjs.vol7iss1pp137-146.

Full text

Abstract:

A Modified Fuzzy policer for Asynchronous Transfer Mode is introduced. In a preceding fuzzy policer model the time window (time interval where ATM cells are accepted in the policer) is not synchronized with the source activity. In the proposed one, the time windows are not consecutive but are triggered by the first arriving cell. The modified policer gives good improvement to the selectivity, and minimizes the congestion over the path. This improvement can be significant for multiple channels.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Wireless Asynchronous Transfer Mode (ATM)"

1

Joe, Inwhee. "Error control for wireless ATM networks." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/15643.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Harris, Carol, Michele Mascari, Kevin Rice, Jeff Smith, and John Steedman. "ASYNCHRONOUS TRANSFER MODE (ATM) CONVERSION DEVICE (ACD)." International Foundation for Telemetering, 1997. http://hdl.handle.net/10150/607525.

Full text

Abstract:

International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, Nevada<br>The Asynchronous Transfer Mode (ATM) Conversion Device (ACD) System is based on state-of-the-art ATM technology. The system interfaces between high-rate ECL/RS-422 raw data bitstreams and Synchronous Optical Network (SONET) OC-3 fiber. The SONET OC-3 interface uses ATM Adaptation Layer Type Five (AAL5) format. The system exceeds its 50 Mbps raw data, single stream requirement and provides single stream raw data throughput at rates up to 75 Mbps. With ATM and SONET packaging overhead, this translates into 90 Mbps on the OC-3 fiber. In addition to high-rate throughput, the system provides multiplexing and demultiplexing of multiple stream throughput based on the ATM cell header Virtual Path and Virtual Channel Identifier (VPI/VCI) values. The system is designed with the flexibility to provide between three and six throughput channels. All of which are multiplexed/demultiplexed to and from the same OC-3 interface. Multiple stream cumulative raw data throughput rates of up to 80 Mbps, or 96 Mbps on the fiber, have successfully run.

APA, Harvard, Vancouver, ISO, and other styles

3

Shankaran, Rajan, University of Western Sydney, and School of Computing and Information Technology. "Asynchronous transfer mode security." THESIS_XXX_CIT_Shankaran_R.xml, 1999. http://handle.uws.edu.au:8081/1959.7/252.

Full text

Abstract:

There is a growing interest in the development of broadband services and networks for commercial use in both local area and wide area networks. The primary reasons for this is a pressing need to meet the demand for increased bandwidth for remote sites interconnection, and in high speed data transfer of bulk data such as images etc. There has also been a significant change in the characteristics of network traffic. It is increasingly taking the form of bursty traffic characterized by an unpredictable demand for bandwidth of several megabytes. A new generation of networking technologies have emerged to meet the demand of growing and uncertain bandwidth requirements. One such technology is called Asynchronous Transfer Mode (ATM) for use on broadband networks under the banner of broadband ISDN. ATM enables interconnection at high speeds in the range of Mbit/s or Gbit/s over wide areas, which effectively moves the bottleneck from networks to end systems. Furthermore, the user is able to access bandwidth on demand and the user is only charged for the bandwidth actually used. As more and more information (audio, image and data) is transferred over ATM networks, security issues are becoming increasingly critical. The rapidly growing use of the Internet to transfer confidential and sensitive information only enhances the importance of security services. One may even argue that the success of ATM will be determined not by its cost effectiveness but also to the level of trust that can be placed on its performance, security and availability. The objective of this dissertation is to address the issues involved in the design of security services for ATM networks.<br>Master of Science (Hons)

APA, Harvard, Vancouver, ISO, and other styles

4

Eslinger, Brian, and Joleen McCombe. "Range Communications System Using Asynchronous Transfer Mode (ATM)." International Foundation for Telemetering, 1998. http://hdl.handle.net/10150/609653.

Full text

Abstract:

International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California<br>As aircraft become more complex and require more resources over larger areas, the challenge of the test ranges is to provide economical solutions to move telemetry data from the test article to the data processing facility. Edwards AFB is in the process of upgrading the ground transmission facilities to transport data including telemetry using Asynchronous Transfer Mode (ATM). This paper documents the challenge of supporting telemetry over ATM, different approaches that are available, the benefits of using ATM, and discussion of candidate hardware options. The effort at Edwards include the linking of the major range facilities over a fiber optic backbone and links to other major test ranges in the Southwest Range Complex via microwave. The fiber optic backbone is expected to be OC-12c (622 Mbps) ATM supporting new capabilities as well as all of the legacy systems. The backbone system will be designed so that migration to OC-48 is possible without service disruption. The microwave links are multiple DS-3 capable. Some of these DS-3s may support legacy systems, but the ability to link ranges using ATM is expected simultaneously.

APA, Harvard, Vancouver, ISO, and other styles

5

Cheng, Heng Seng. "Enhancement of asynchronous transfer mode over satellite links." Thesis, University of Aberdeen, 1998. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU106658.

Full text

Abstract:

This thesis is a study on the issues involved in implementing asynchronous transfer mode (ATM) over satellite links and the ways in which ATM can be optimised to achieve better performance over such links. The main issue is the impact of errors introduced by the satellite links on the performance of ATM. Options to improve the performance of ATM over SATCOM have been identified and they are: (i) increase transmit power, (ii) FEC, (iii) adoption of an alternative ATM architecture, (iv) extensive to commercial-off-the-shelf (COTS) ATM equipments and (v) construction of ATM protocol enhancers. The fifth option which uses a combination of protocol conversions and error control techniques is preferred over the others as it allows maximum use of standard COTS ATM equipments and provides a framework for experimentation with multiple versions of ATM equipments (that are evolving rapidly). As part of the strategy of using protocol enhancement to improve the performance of ATM, two techniques have been proposed. The first technique is called cell header duplication, and it improves cell loss ratio by compressing the information in the cell headers and using the extra room in each header to carry the duplicate compressed header information of the previous cell. When a cell header is corrupted, the corrupted header information is replaced with the duplicate copy carried in the next cell, provided that too is not corrupted. This technique was compared with cell header interleaving and error tolerant addressing which are cell header protection techniques proposed by others. The second technique is called selective cell retransmission, which employs a partial retransmission (hybrid) ARO strategy to perform error recovery for only the individually errored non-realtime cells allowing it to achieve higher reliability of data transfer and more efficient utilisation of satellite bandwidth. The overhead in the proposed scheme varies according to the error conditions in the satellite channel making it an adaptive system. This is achieved by using a unique method of sending error erasure information (inserted into cells carrying negative acknowledgement messages) from the receiver to the transmitter which will use this information to pin-point the corrupted cells. The scheme is also compared with concatenated coding (using a Reed-Solomon code) and link protocols (using selective repeat (full retransmission) ARQ).

APA, Harvard, Vancouver, ISO, and other styles

6

Almulhem, Abdulaziz S. "Error correction techniques for ATM communications." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0009/NQ36627.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Crosby, Simon Andrew. "Performance management in ATM networks." Thesis, University of Cambridge, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.285357.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Shankaran, Rajan. "Asynchronous transfer mode security." Thesis, View thesis, 1999. http://handle.uws.edu.au:8081/1959.7/252.

Full text

Abstract:

There is a growing interest in the development of broadband services and networks for commercial use in both local area and wide area networks. The primary reasons for this is a pressing need to meet the demand for increased bandwidth for remote sites interconnection, and in high speed data transfer of bulk data such as images etc. There has also been a significant change in the characteristics of network traffic. It is increasingly taking the form of bursty traffic characterized by an unpredictable demand for bandwidth of several megabytes. A new generation of networking technologies have emerged to meet the demand of growing and uncertain bandwidth requirements. One such technology is called Asynchronous Transfer Mode (ATM) for use on broadband networks under the banner of broadband ISDN. ATM enables interconnection at high speeds in the range of Mbit/s or Gbit/s over wide areas, which effectively moves the bottleneck from networks to end systems. Furthermore, the user is able to access bandwidth on demand and the user is only charged for the bandwidth actually used. As more and more information (audio, image and data) is transferred over ATM networks, security issues are becoming increasingly critical. The rapidly growing use of the Internet to transfer confidential and sensitive information only enhances the importance of security services. One may even argue that the success of ATM will be determined not by its cost effectiveness but also to the level of trust that can be placed on its performance, security and availability. The objective of this dissertation is to address the issues involved in the design of security services for ATM networks.

APA, Harvard, Vancouver, ISO, and other styles

9

Eslinger, Brian, and Joleen McCombe. "TELEMETRY TRANSMISSION USING INVERSE MULTIPLEXING AND ASYNCHRONOUS TRANSFER MODE (ATM)." International Foundation for Telemetering, 1997. http://hdl.handle.net/10150/607391.

Full text

Abstract:

International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, Nevada<br>The growing need to transmit larger telemetry streams from the receiving site to the processor location over greater distances is requiring newer and more creative techniques. This paper reports efforts to use Asynchronous Transfer Mode (ATM) technology and inverse multiplexing to provide an economical system to interface telemetry streams into the public network for reliable transmission. Cost savings are available immediately for programs that are willing to meet the synchronization criteria today. Lab testing has shown the feasibility of using cost efficient techniques for data transmission. This document describes the investigation that is currently underway that could provide a significant change to the way telemetry data is transmitted from receiver sites to data processing sites. Instead of using dedicated lines with dedicated bandwidth regardless of the program being supported, the approach that has been tested in a lab environment would allow the dynamic allocation of bandwidth using ATM over a variety of carrier services. The combination of ATM and inverse multiplexing allows telemetry data rates above 1.5 Megabits per second (Mbps) to be transmitted over multiple T1 (1.544 Mbps) lines. Previously, the only choice when data rates exceeded 1.5 Mbps was to use an entire DS-3 (45 Mbps). Now it is possible to transmit intermediate sized data rates (1.5 to 8 Mbps) by bonding multiple T1s to provide the desired data throughput.

APA, Harvard, Vancouver, ISO, and other styles

10

Niswander, Dan A. "An Assessment of Asynchronous Transfer Mode (ATM) Training for Educators." NSUWorks, 1996. http://nsuworks.nova.edu/gscis_etd/751.

Full text

Abstract:

The purpose of this dissertation was to develop and evaluate a hypertext-based training tutorial/guide on asynchronous transfer mode (ATM) technology for use by school district educators and technology planners. A review of literature indicated training needs on new broadband technologies were not being adequately met from the point of view of an educational environment. An interactive hypertext solution was proposed, designed, and developed based on the needs of adult learners. An analysis of these needs indicated adults prefer flexibility in navigating between training topics as well as in the pace of material presentation, that is, whether to proceed at a faster or slower pace based on their personal preference, not the pace selected by an instructor. Interactive hypertext was found to support these specific needs. The procedures followed in this study included the selection of an appropriate authoring system, development of the tutorial/guide on ATM technology based on a structured methodology that focused on hypertext development, and an evaluation of the tutorial/guide. This evaluation included measuring its learning effectiveness through the use of pretests and posttests as well as an evaluation of the population's preferences, attitudes, and opinions toward this type of learning (hypertext-based) as measured by a comparison of precourse and post course surveys. A case-study research approach was proposed. The results, as evaluated by a comparison of mean scores, indicated that there was a statistically significant higher mean score on the topic mastery posttest than on the pretest when the hypertext-based tutorial was given to each participant. Furthermore, the preferences toward this type training also increased significantly as measured by the comparison of means of the precourse and postcourse preference surveys.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Wireless Asynchronous Transfer Mode (ATM)"

1

IEEE International Conference on ATM (1st 1998 Colmar, France). 1998 1st IEEE international Conference on ATM, ICATM '98, June 22-24, 1998, Colmar, France. IEEE, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

IEEE International Conference on ATM (4th 2002 Seoul, Korea). Joint 4th IEE International Conference on ATM (ICATM'01) and High Speed Intelligent Internet Symposium, April 22-25, 2001, Seoul, Korea. IEEE, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Toh, C.-K. Wireless ATM and Ad-Hoc Networks: Protocols and Architectures. Springer US, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Prycker, Martin de. Asynchronous transfer mode: ATM. Prentice Hall, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Peter, Lenhard, ed. Asynchronous transfer mode (ATM): Technical overview. 2nd ed. Prentice Hall PTR, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Gadecki, Cathy. ATM for dummies. IDG Books Worldwide, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Chen, Thomas M. ATM switching systems. Artech House, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Chen, Thomas M. ATM switching systems. Artech House, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

James, Martin. Asynchronous transfer mode: ATM architecture and implementation. Prentice Hall PTR, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gounari, Asmina. Security in asynchronous transfer mode (ATM) networks. Oxford Brookes University, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Wireless Asynchronous Transfer Mode (ATM)"

1

Buchanan, William J. "Asynchronous Transfer Mode (ATM)." In Advanced Data Communications and Networks. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4419-8670-2_31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Buchanan, W. "Asynchronous Transfer Mode (ATM)." In Advanced Data Communications and Networks. CRC Press, 2023. http://dx.doi.org/10.1201/9781003420415-31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Robertazzi, Thomas. "Asynchronous Transfer Mode (ATM)." In Basics of Computer Networking. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-2104-7_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Buchanan, W. "Asynchronous Transfer Mode (ATM)." In Applied Data Communications and Networks. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-1207-9_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Buchanan, William. "MAN: Asynchronous Transfer Mode (ATM)." In Mastering Global Information Systems. Macmillan Education UK, 1997. http://dx.doi.org/10.1007/978-1-349-14411-2_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Holtsinger, Douglas S. "Congestion Control Mechanisms for ATM Networks." In Asynchronous Transfer Mode Networks. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2844-9_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Zitterbart, M., A. N. Tantawy, B. Stiller, and T. Braun. "On Transport Systems for ATM Networks." In Asynchronous Transfer Mode Networks. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2844-9_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Abensour, Daniel, Jean Calvignac, and Len Felton. "Some Obstacles on the Road to ATM." In Asynchronous Transfer Mode Networks. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2844-9_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Tipper, David, Srinivas Pappu, Aaron Collins, and John George. "Space Priority Buffer Management for ATM Networks." In Asynchronous Transfer Mode Networks. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2844-9_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Chimento, Philip F. "A Review of Video Sources in ATM Networks." In Asynchronous Transfer Mode Networks. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2844-9_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Wireless Asynchronous Transfer Mode (ATM)"

1

Kiamilev, Fouad, Rohini Sharma, John Childers, Jim Morris, Hedong Yang, and Mike Feldman. "Optically interconnected MCM’s for asynchronous-transfer-mode networks." In OSA Annual Meeting. Optica Publishing Group, 1993. http://dx.doi.org/10.1364/oam.1993.mf.6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Otter, M. D. "Modelling asynchronous transfer mode (ATM) traffic over the satellite bearer." In IEE Colloquium on Military Satellite Communications. IEE, 2000. http://dx.doi.org/10.1049/ic:20000129.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Duerinckx, Andre J., Alek S. Hayrapetian, Daniel J. Valentino, et al. "Assessment of asynchronous transfer mode (ATM) networks for regional teleradiology." In Medical Imaging 1996, edited by R. Gilbert Jost and Samuel J. Dwyer III. SPIE, 1996. http://dx.doi.org/10.1117/12.239298.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Panchanathan, Sethuraman, and A. Jain. "Robust algorithms for image transmission over asynchronous transfer mode (ATM) networks." In Visual Communications and Image Processing '94, edited by Aggelos K. Katsaggelos. SPIE, 1994. http://dx.doi.org/10.1117/12.185948.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chao Zhang, Jialuo Xiao, and Liang Zhao. "Wireless Asynchronous Transfer Mode based fly-by-wireless avionics network." In 2013 IEEE/AIAA 32nd Digital Avionics Systems Conference (DASC). IEEE, 2013. http://dx.doi.org/10.1109/dasc.2013.6712589.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zhang, Chao, Jialuo Xiao, and Liang Zhao. "Wireless Asynchronous Transfer Mode Based Fly-by-Wireless Avionics Network." In 2013 IEEE/AIAA 32nd Digital Avionics Systems Conference (DASC). IEEE, 2013. http://dx.doi.org/10.1109/dasc.2013.6719671.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Pandiaraj, K., and L. Nisha. "A low power parity CAM for asynchronous transfer mode(ATM) switch application." In 2014 International Conference on Computer Communication and Informatics (ICCCI). IEEE, 2014. http://dx.doi.org/10.1109/iccci.2014.6921815.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Leif, Stephanie H. "Brief introduction to using asynchronous transfer mode (ATM) for communications in medical devices." In Photonics West '95, edited by Gerald E. Cohn, Jeremy M. Lerner, Kevin J. Liddane, Alexander Scheeline, and Steven A. Soper. SPIE, 1995. http://dx.doi.org/10.1117/12.206024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kusayanagi, Michio, Tomohiro Ishihara, Masato Okuda, Jun Tanaka, Haruo Yamashita, and Kazuo Yamaguchi. "Asynchronous Transfer Mode (ATM)-based access network with multicast function for multimedia services." In Advanced Networks and Services, edited by Robert A. Cryan, P. Nalinaj Fernando, Pierpaolo Ghiggino, and John M. Senior. SPIE, 1995. http://dx.doi.org/10.1117/12.201259.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kadirire, J. "Exploiting geographic spread (GS) for wide-area asynchronous transfer mode (ATM) dynamic multipoint routing." In 5th IEE Conference on Telecommunications. IEE, 1995. http://dx.doi.org/10.1049/cp:19950153.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Wireless Asynchronous Transfer Mode (ATM)"

1

Long, Douglas, and Peter Samsel. Asynchronous Transfer Mode (ATM) User Security Services. Defense Technical Information Center, 2001. http://dx.doi.org/10.21236/ada388288.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yu, Christopher C. Preliminary Analysis of Asynchronous Transfer Mode (ATM) over Microwave Channels. Defense Technical Information Center, 1993. http://dx.doi.org/10.21236/ada275214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kumar, R. Asynchronous Transfer Mode (ATM) Package for the Media Gateway Control Protocol (MGCP). RFC Editor, 2003. http://dx.doi.org/10.17487/rfc3441.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Singh, S., M. Townsley, and C. Pignataro. Asynchronous Transfer Mode (ATM) over Layer 2 Tunneling Protocol Version 3 (L2TPv3). RFC Editor, 2006. http://dx.doi.org/10.17487/rfc4454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Martini, L., J. Jayakumar, M. Bocci, N. El-Aawar, J. Brayley, and G. Koleyni. Encapsulation Methods for Transport of Asynchronous Transfer Mode (ATM) over MPLS Networks. RFC Editor, 2006. http://dx.doi.org/10.17487/rfc4717.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ott, Teunis J., James E. Burns, and Larry H. Wong. Transmission Control Protocol (TCP) Over Asynchronous Transfer Mode (ATM): A Simulation Study. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada386671.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Malis, A., L. Martini, J. Brayley, and T. Walsh. Pseudowire Emulation Edge-to-Edge (PWE3) Asynchronous Transfer Mode (ATM) Transparent Cell Transport Service. RFC Editor, 2007. http://dx.doi.org/10.17487/rfc4816.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Pratt, T. J., O. Vahle, and S. A. Gossage. Sandia`s network for supercomputing `95: Validating the progress of Asynchronous Transfer Mode (ATM) switching. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/212702.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Nadeau, T., and S. Hegde. Multiprotocol Label Switching (MPLS) Label-Controlled Asynchronous Transfer Mode (ATM) and Frame-Relay Management Interface Definition. RFC Editor, 2006. http://dx.doi.org/10.17487/rfc4368.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pierson, L. G., and E. L. Witzke. Final Report for the Scaled Asynchronous Transfer Mode (ATM) Encryption Laboratory Directed Research and Development Project. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/2639.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!