Dissertations / Theses on the topic 'Wireless communication systems, wireless internet'

The revolutionary advances in the wireless communication technologies are inspiring the researchers to envision the next generation wireless networking architectures, i.e., Next Generation Wireless Internet (NGWI), InterPlaNetary (IPN) Internet, and Wireless Sensor Networks (WSN). There exist significant technological challenges for the realization of these envisioned next generation network architectures. NGWI will be the convergence of the Internet and heterogeneous wireless architectures, which have diverse characteristics and hence pose different sets of research challenges, to achieve anywhere, anytime seamless service to the mobile users. Similarly, the unique characteristics and challenges posed by deep space communications call for novel networking protocols to realize the IPN Internet objective. Furthermore, in order to realize the potential gains of WSN, it is imperative that communication challenges imposed by resource constraints of sensor nodes must be efficiently addressed with novel solutions tailored to the WSN paradigm. The objective of this research is to develop new advanced transport protocols for reliable data transport and real-time multimedia delivery in the next generation heterogeneous wireless network architectures. More specifically, the analytical rate control (ARC) protocol for real-time multimedia delivery is first proposed for wired/wireless hybrid networks. Next, a new rate control scheme (RCS) is proposed to achieve high throughput performance and fairness for real-time multimedia traffic over the satellite links. The unified adaptive transport layer (ATL) suite and its protocols for both reliable data transport (TCP-ATL) and real-time multimedia delivery (RCP-ATL) are introduced for the NGWI. A new reliable transport protocol for data transport in the IPN Internet (TP-Planet) is then proposed to address the unique challenges of the IPN Internet backbone links. A new integrated tranmission protocol (ITP) is then proposed for reliable data transport over multihop IPN Internet paths. Finally, the event-to-sink reliable transport (ESRT) protocol is proposed to achieve reliable event transport with minimum energy expenditure in WSN.

Thesis (PhD.) -- Bond University, 2007.
"A dissertation submitted in fulfillment of the requirements for the degree of Doctor of Philosophy"-- t.p. Bibliography: leaves 219-242. Also available via the World Wide Web.

Thesis (PhD) - Swinburne University of Technology, Industrial Research Institute Swinburne - 2007.
Submitted for the degree of Doctor of Philosophy at the Industrial Research Institute Swinburne (IRIS), Swinburne University of Technology - 2007. Typescript. "August 2007". Includes bibliographical references (p. 256-270).

>Magister Scientiae - MSc
This thesis validates that packet aggregation is a viable technique to increase call capacity for Voice over Internet Protocol over wireless mesh networks. Wireless mesh networks are attractive ways to provide voice services to rural communities. Due to the ad-hoc routing nature of mesh networks, packet loss and delay can reduce voice quality. Even on non-mesh networks, voice quality is reduced by high overhead, associated with the transmission of multiple small packets. Packet aggregation techniques are proven to increase VoIP performance and thus can be deployed in wireless mesh networks. Kernel level packet aggregation was initially implemented and tested on a small mesh network of PCs running Linux, and standard baseline vs. aggregation tests were conducted with a realistic voice traffic profile in hop-to-hop mode. Modifications of the kernel were then transferred to either end of a nine node 'mesh potato' network and those tests were conducted with only the end nodes modified to perform aggregation duties. Packet aggregation increased call capacity expectedly, while quality of service was maintained in both instances, and hop-to-hop aggregation outperformed the end-to-end configuration 4:1. However, implementing hop-to-hop in a scalable fashion is prohibitive, due to the extensive kernel level debugging that must be done to achieve the call capacity increase. Therefore, end-to-end call capacity increase is an acceptable compromise for eventual scalable deployment of voice over wireless mesh networks.

International Telemetering Conference Proceedings / October 20-23, 2003 / Riviera Hotel and Convention Center, Las Vegas, Nevada
NASA Goddard Space Flight Center (GSFC) is developing the Remote Internet Protocol Communication (RIPCom) system, which is a wireless communication system that makes an aircraft look like a network node in the sky. RIPCom provides an Ethernet to Radio Frequency (RF) connection solution for real-time data transmission, and its design allows the end points of the communication system to become nodes on a network with assigned IP addresses. RIPCom’s design is especially suitable for Unmanned Aerial Vehicle (UAV) applications, and its versatility makes it valuable for many systems that require a high speed, digital wireless network.

As the demands to monitor the health status of structures increase, researchers around the world have proposed several concepts to solve this issue. This research first examines the existing technologies and then works toward a novel structural health monitoring solution. A comprehensive discussion includes major topics from sensor selection and installation to sensing data display. A cyber-physical system combining embedded system, wireless communication, and the Java platform was developed for structural health monitoring. The focus of this system is to continuously monitor structural response and broadcast the information to users worldwide via the Internet. A wireless sensor node is designed to connect up to eight sensor channels. Various sensors have been tested on the sensor node. A data acquisition and repository system was also developed. The use of the Java language makes this system capable of running in virtually any existing computer platform. Distributed design concept expands its functionalities and capabilities. Its graphical user interface offers users a friendly and ease-of-use environment to monitor real-time and historical data in both graphical and numerical ways. Every component of the system has been validated to verify its functionality. Additionally, the whole system has been implemented on a steel pedestrian bridge to observe its performance.

In today’s dynamic technological landscape, wireless communication networks have become an important part of economic development. The emergence of wireless technologies raises hopes to extend communication to remote areas that have not seen any tangible deployment to date. As developing nations pin their hopes to wireless technologies, cost models for wireless communication networks are becoming vital to support the emerging technologies. However, varying cost changes raise critical challenges to the estimation of both capital expenditure and operational expenditure. The network deployment process has numerous events that may cause adjustments to initially estimated project costs. These adjustments are necessary for a cost management plan and this plan includes monitoring cost performance and ensuring that only appropriate changes are made to the network project. The incidents that may cause cost changes can not be entirely predicted as their distribution tend to change dynamically from time to time. Estimating network deployment costs in such a dynamic environment necessitates cost models that can adapt to random occurrence of cost changes. Widely used cost models are usually performed by experienced personnel whose engineering experience is derived from deploying similar networks. In this approach experienced personnel add a certain percentage to the cost estimate to cater for contingency costs. Certainly such an approach depends on individual opinion, making it subjective and void of mathematical estimating relationships which are of paramount importance in ensuring that estimated deployment costs are sufficient to deal with cost uncertainties. We observe that existing approaches can only explore a limited solution space and hence can lead to cost overruns if implemented in dynamically cost changing environments. This thesis presents a wireless communication network deployment cost model that incorporates uncertainties into the final cost estimate. The model is adaptive to unpredictable cost changes since it allows adjustments of confidence levels when calculating contingency costs. This allows dynamically updating the cost changes without the cost model being reconstructed from scratch. We make use of the Poisson process in modeling the occurrence of incidents that are responsible for causing cost changes during network deployment. We also show that the occurrence of the incidents causing cost change are random and tend to follow the Poisson distribution. Using different levels of confidence we model various cost contingencies and make sensitivity analyses to identify the probability of cost overrun when given different contingencies. The dynamic adaptive cost model can be used either at the strategic level to understand the cost of a particular technique or at the operational level, as a way to show how Poisson process in network deployment can compare with engineering experience and other estimating techniques. We believe that the model is useful for remote areas where deployment costs are volatile and the distribution of incidents causing cost change to original cost estimates are diverse and dynamically changing. Further we expect that our research improves the knowledge base of information about the costs for rural communities to connect to the Internet, consequently providing useful input to future policy debates. This work is further poised to be a utility function to help those planning internet infrastructure deployments in least developed regions.

SIP is receiving much attention these days and it seems to be the most promising candidate as a signaling protocol for the current and future IP telephony services. Realizing this, there is the obvious need to provide a certain level of quality comparable to the traditional telephone service signalling system. Thus, we identified the major costs of SIP, which were found to be delay and security. This thesis discusses the costs of SIP, the solutions for the major costs, and the development of a low cost SIP application. The literature review of the components used to develop such a service is discussed, the networks in which the SIP is used are outlined, and some SIP applications and services previously designed are discussed. A simulation environment is then designed and implemented for the instant messaging service for wireless devices. This environment simulates the average delay in LAN and WLAN in different scenarios, to analyze in which scenario the system has the lowest costs and delay constraints.

Context. Internet of Things (IoT) is an extension of the Internet, which now includes physical objects of the real world. The main purpose of Internet of Things is to increase a quality of people’s daily life. A smart home is one of the promising areas in the Internet of Things which increases rapidly. It allows users to control their home devices anytime from any location in the world using Internet connectivity and automate their work based on the physical environment conditions and user preferences. The main issues in deploying the architecture of IoT are the security of the communication between constrained low-power devices in the home network and device performance. Battery lifetime is a key QoS parameter of a battery-powered IoT device which limits the level of security and affects the performance of the communication. These issues have been deepened with the spread of cheap and easy to use microcontrollers which are used by electronic enthusiasts to build their own home automation projects. Objectives. In this study, we investigated wireless communication technologies used in low-power and low-bandwidth home area networks to determine which of them are most suitable for smart home applications. We also investigated the correlation between security, power consumption of constrained IoT device, and performance of wireless communication based on a model of a home automation system with a sensor node. Sensor node was implemented using Arduino Nano microcontroller and RF 433 MHz wireless communication module. Methods. To achieve the stated objectives of this research following methods were chosen: literature review to define common applications and communication technologies used in a smart home scenario and their requirements, comparison of wireless communication technologies in smart home, study of Arduino microcontroller technology, design and simulation of a part of  home automation project based on Arduino, experimental measurements  of execution time and power consumption of Arduino microcontroller with RF 433 MHz wireless module when transmitting data with different levels of security, and analysis of experimental results. Results. In this research, we presented a detailed comparison of ZigBee, WiFi, Bluetooth, Z-Wave, and ANT communication technologies used in a smart home in terms of the main characteristics. Furthermore, we considered performance, power consumption, and security. A model of a home automation system with a sensor node based on Arduino Nano was described with sleep management and performance evaluation. The results show that the battery lifetime of Arduino in a battery-powered sensor node scenario is determined by the communication speed, sleep management, and affected by encryption. Conclusions. The advanced communication strategy can be used to minimize the power consumption of the device and increase the efficiency of the communication. In that case, our security measures will reduce the productivity and lifetime of the sensor node not significantly. It’s also possible to use symmetric encryption with smaller block size.

Wireless positioning and tracking have long been a critical technology for various applications such as indoor/outdoor navigation, surveillance, tracking of assets and employees, and guided tours, among others. Proliferation of Internet of Things (IoT) devices, the evolution of smart cities, and vulnerabilities of traditional localization technologies to cyber-attacks such as jamming and spoofing of GPS necessitate development of novel radio frequency (RF) localization and tracking technologies that are accurate, energy-efficient, robust, scalable, non-invasive and secure. The main challenges that are considered in this research work are obtaining fundamental limits of localization accuracy using received signal strength (RSS) information with directional antennas, and use of burst and intermittent measurements for localization. In this dissertation, we consider various RSS-based techniques that rely on existing wireless infrastructures to obtain location information of corresponding IoT devices. In the first approach, we present a detailed study on localization accuracy of UHF RF IDentification (RFID) systems considering realistic radiation pattern of directional antennas. Radiation patterns of antennas and antenna arrays may significantly affect RSS in wireless networks. The sensitivity of tag antennas and receiver antennas play a crucial role. In this research, we obtain the fundamental limits of localization accuracy considering radiation patterns and sensitivity of the antennas by deriving Cramer-Rao Lower Bounds (CRLBs) using estimation theory techniques. In the second approach, we consider a millimeter Wave (mmWave) system with linear antenna array using beamforming radiation patterns to localize user equipment in an indoor environment. In the third approach, we introduce a tracking and occupancy monitoring system that uses ambient, bursty, and intermittent WiFi probe requests radiated from mobile devices. Burst and intermittent signals are prominent characteristics of IoT devices; using these features, we propose a tracking technique that uses interacting multiple models (IMM) with Kalman filtering. Finally, we tackle the problem of indoor UAV navigation to a wireless source using its Rayleigh fading RSS measurements. We propose a UAV navigation technique based on Q-learning that is a model-free reinforcement learning technique to tackle the variation in the RSS caused by Rayleigh fading.

Next generation wireless systems have an IP-based infrastructure with the support of heterogeneous access technologies. One research challenge for next generation all-IP based wireless systems is to design intelligent mobility management techniques that take advantage of IP-based technologies to achieve global roaming between various access networks. To support global roaming, next generation wireless systems require the integration and interoperation of heterogeneous mobility management techniques. Mobility in a hierarchical structure or multilayered environment should be supported. The objective of this study is to develop new mobility management techniques for global roaming support in next generation all-IP based wireless systems. More specifically, new schemes for location management and paging in Mobile IP for network layer mobility support, and new schemes for location management and handoff management in heterogeneous overlay networks for link layer mobility support are proposed and evaluated. For network layer mobility support, a distributed and dynamic regional location management mechanism for Mobile IP is proposed. Under the proposed scheme, the signaling burden is evenly distributed and the regional network boundary is dynamically adjusted according to the up-to-date mobility and traffic load for each terminal. Next, a user independent paging scheme based on last-known location and mobility rate information for Mobile IP is proposed. The proposed scheme takes the aggregated behavior of all mobile users as the basis for paging. For link layer mobility support, an IP-based system architecture for the integration of heterogeneous mobility management techniques is proposed. Three location management schemes under this IP-based architecture are proposed. All the three schemes support user preference call delivery which is a very important feature of next generation wireless communications. A threshold-based enhancement method is also proposed to further improve the system performance. Finally, a hybrid resource allocation scheme for handoff management in wireless overlay networks is proposed. Under this scheme, the overall system resources can be optimally allocated when mobile users are covered by multiple overlay networks.

Providing affordable Internet access to rural populations in large developing countries to aid economic and social progress, using various non-conventional techniques has been a topic of active research recently. The main obstacle in providing fiber-optic based terrestrial Internet links to remote villages is the cost involved in laying the cable network and disproportionately low rate of return on investment due to low density of paid users. The conventional alternative to this is providing Internet access using geostationary satellite links, which can prove commercially infeasible in predominantly cost-driven rural markets in developing economies like India or China due to high access cost per user.

A low-cost derivative of the conventional satellite-based Internet access system can be developed by utilizing an aging geostationary satellite nearing the end of its active life, allowing it to enter an inclined geosynchronous orbit by limiting station keeping to only east-west maneuvers to save fuel. Eliminating the need for individual satellite receiver modules by using one centrally located earth station per village and providing last mile connectivity using Wi-Fi can further reduce the access cost per user. A Ku band system design for rural India based on this concept, using an Intelsat 906 satellite is proposed in this thesis. The path of the satellite and the tracking requirements at village stations are determined. Components required for various blocks of the system are defined. Modulation schemes, FEC, data rates, number of customers to be served, link availability and outage statistics are presented. Quantitative analysis using link budgets and ITU rain models are provided. An optimized system design and a commercial deployment model are suggested which show the system is economically feasible.
Master of Science

Ultra wideband (UWB) communications has been a subject of much discussion over the last decade. The method of UWB has had a hard time to establish itself among other methods such as Bluetooth and WiFi but as internet of things (IoT) gains a foothold in our daily lives, UWB has presented some new application areas. These application areas are, among other things, self driving cars, energy efficient data transfer, health care applications, sensor networks and real time location systems. This project aims to use UWB communications to real-world applications, specifically, electrocardiography (ECG) - an application in health care in this project, and develop a prototype for the application. The prototype consists of two Android smart phones and two UWB modules (EVK1000 evaluation kits from DecaWave, Inc). Each smartphone connects a UWB module so that the two smart phones, one as sender and the other as receiver, can communicate directly through UWB radios. This is intended to serve as a proof-of-concept that UWB devices are well suited for short range data transfer applications. The result achieved by the project is an android application along with sending and receiving programs for the development boards by Decawave and additional information regarding UWB and its uses. The results also include a comparison of UWB, Bluetooth and WiFi as of todays standard. The goal of the project is to learn how android applications are programmed, how UWB is used in todays technology and how to program and use development boards presented by companies. The prototype has been built and shown that 12-lead simulated ECGsignals from the sender can be transfered to the receiver through the UWB communications. The work includes programming (in C) the two UWB modules for UWB communications, and Java for the android applications (programs) on the smart phones. The Android application is handling transmission of ECG signals to the sending UWB module and then receiving them from the receiving UWB module as well as displaying them on the receiver. The future work to continue the present project is to replace the sending smart phone by an ECG device that sends real ECG signals.

Thesis (Ph.D.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Gee-Kung Chang; Committee Co-Chair: Jianjun Yu; Committee Member: John A. Buck; Committee Member: Joy Laskar; Committee Member: Umakishore Ramachandran; Committee Member: Ye Li

This qualitative study explored the overall impact of training HVAC technicians using the SightPros-VirTechs system for remote, wireless, internet video assistance at a small HVAC company, Metro Environmental. John Thomason, the president/co-owner developed a website and a new SightPros communication tool that allows wireless, one-on-one, just-in-time, high-quality, video-monitored instructions between an expert at one site and a technician at another site. Metro Environmental successfully used the SightPros-VirTechs system to train a new apprentice remotely. The apprentice and expert changed their normal and routine physical activities because the expert worked remotely and the apprentice worked on-site. Within just a few months, the apprentice proved competent enough to go to customer accounts without more experienced technicians nearby. The technicians express excitement about the SightPros communication tool as a way to contact remote experts whenever needed. The customer and business contacts also give good reviews and suggest other benefits. The expert permanently captures the communications so the company can use the saved video for many applications, especially training. The dissertation provides a list of recommendations to trainers/educators for similar applications.

Made available in DSpace on 2014-06-11T19:22:35Z (GMT). No. of bitstreams: 0 Previous issue date: 2007-04-13Bitstream added on 2014-06-13T20:07:40Z : No. of bitstreams: 1 tateoki_gt_me_ilha.pdf: 862690 bytes, checksum: 448d8bedc160b95654695c9900b1d0fe (MD5)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
A aquisição de dados tem evoluído de forma significativa nos últimos anos e passa a ser indispensável em várias aplicações nas áreas de engenharia, agricultura, medicina, aeronáutica, etc. O estado da arte nessa área envolve o uso de sistemas de comunicação sem fio e da internet. Neste trabalho é apresentado um sistema moderno de aquisição de dados, que é baseado em uma comunicação sem fio via rede GSM (Global Mobile for System), com conexão via Internet através de um sistema de telefonia celular GPRS (General Packet Radio Service), monitoramento de dados via página Web (World Web Browser) e interface de aplicação com base em um microcontrolador. O sistema é bastante flexível e foi testado em operações reais no monitoramento de temperatura ambiente. Os resultados obtidos são altamente satisfatórios e mostra que o sistema pode servir de base para aplicações em diferentes áreas onde a telemetria seja indispensável.
Data acquisition has significantly been developed in the last years and became indispensable in many application area of engineering such as agriculture, medicine, aeronautic, etc. The state of art in this area is basead on wireless communication system and Internet. In this work it is presented a modern data acquisition based on wireless communication through the Internet, which includes a Celular Mobile GPRS (General Packet Radio Service) in a GSM (Global Mobile System) network, and remote data monitoring via WEB (World Web Browser) that can be used in a Telemetry Network construction. The system was tested in real conditions as a temperature monitoring system based on a microcontroller and it has presented good results. The high flexibility model proposed allows to use it in many distinct applications that require remote data acquisition.

Orientador: Jozué Vieira Filho
Banca: Suely Cunha Amaro Mantovani
Banca: José Raimundo de Oliveira
Resumo: A aquisição de dados tem evoluído de forma significativa nos últimos anos e passa a ser indispensável em várias aplicações nas áreas de engenharia, agricultura, medicina, aeronáutica, etc. O estado da arte nessa área envolve o uso de sistemas de comunicação sem fio e da internet. Neste trabalho é apresentado um sistema moderno de aquisição de dados, que é baseado em uma comunicação sem fio via rede GSM (Global Mobile for System), com conexão via Internet através de um sistema de telefonia celular GPRS (General Packet Radio Service), monitoramento de dados via página Web (World Web Browser) e interface de aplicação com base em um microcontrolador. O sistema é bastante flexível e foi testado em operações reais no monitoramento de temperatura ambiente. Os resultados obtidos são altamente satisfatórios e mostra que o sistema pode servir de base para aplicações em diferentes áreas onde a telemetria seja indispensável.
Abstract: Data acquisition has significantly been developed in the last years and became indispensable in many application area of engineering such as agriculture, medicine, aeronautic, etc. The state of art in this area is basead on wireless communication system and Internet. In this work it is presented a modern data acquisition based on wireless communication through the Internet, which includes a Celular Mobile GPRS (General Packet Radio Service) in a GSM (Global Mobile System) network, and remote data monitoring via WEB (World Web Browser) that can be used in a Telemetry Network construction. The system was tested in real conditions as a temperature monitoring system based on a microcontroller and it has presented good results. The high flexibility model proposed allows to use it in many distinct applications that require remote data acquisition.
Mestre

This thesis was carried out in the context of a project developed by the university of Bologna upon commission of GD SpA, aimed at providing a new proprietary solution for a Industrial Internet of Things monitoring application. The focus is on the definition and implementation of a wireless communication protocol, which has been called LoRaIN, based on LoRa technology at 2,4 GHz and suitable for Industry 4.0 applications. LoraIN proposes a centralized approach to Network management, with a single entity keeping synchronization among devices and scheduling all the transmissions according to separated time slots, in order to avoid collisions. Distinctive features of the protocol are also its multi-hopping functionality and the possibility to deploy batteryless devices, charged via Wireless Power Transfer technology. Numerical results reported in the thesis demonstrate how LoRaIN protocol meets the application requirements.

La quinta generación de redes móviles (5G) se encuentra a la vuelta de la esquina. Se espera provea de beneficios extraordinarios a la población y que resuelva la mayoría de los problemas de las redes 4G actuales. El éxito de 5G, cuya primera fase de estandarización ha sido completada, depende de tres pilares: comunicaciones tipo-máquina masivas, banda ancha móvil mejorada y comunicaciones ultra fiables y de baja latencia (mMTC, eMBB y URLLC, respectivamente). En esta tesis nos enfocamos en el primer pilar de 5G, mMTC, pero también proveemos una solución para lograr eMBB en escenarios de distribución masiva de contenidos. Específicamente, las principales contribuciones son en las áreas de: 1) soporte eficiente de mMTC en redes celulares; 2) acceso aleatorio para el reporte de eventos en redes inalámbricas de sensores (WSNs); y 3) cooperación para la distribución masiva de contenidos en redes celulares. En el apartado de mMTC en redes celulares, esta tesis provee un análisis profundo del desempeño del procedimiento de acceso aleatorio, que es la forma mediante la cual los dispositivos móviles acceden a la red. Estos análisis fueron inicialmente llevados a cabo por simulaciones y, posteriormente, por medio de un modelo analítico. Ambos modelos fueron desarrollados específicamente para este propósito e incluyen uno de los esquemas de control de acceso más prometedores: access class barring (ACB). Nuestro modelo es uno de los más precisos que se pueden encontrar en la literatura y el único que incorpora el esquema de ACB. Los resultados obtenidos por medio de este modelo y por simulación son claros: los accesos altamente sincronizados que ocurren en aplicaciones de mMTC pueden causar congestión severa en el canal de acceso. Por otro lado, también son claros en que esta congestión se puede prevenir con una adecuada configuración del ACB. Sin embargo, los parámetros de configuración del ACB deben ser continuamente adaptados a la intensidad de accesos para poder obtener un desempeño óptimo. En la tesis se propone una solución práctica a este problema en la forma de un esquema de configuración automática para el ACB; lo llamamos ACBC. Los resultados muestran que nuestro esquema puede lograr un desempeño muy cercano al óptimo sin importar la intensidad de los accesos. Asimismo, puede ser directamente implementado en redes celulares para soportar el tráfico mMTC, ya que ha sido diseñado teniendo en cuenta los estándares del 3GPP. Además de los análisis descritos anteriormente para redes celulares, se realiza un análisis general para aplicaciones de contadores inteligentes. Es decir, estudiamos un escenario de mMTC desde la perspectiva de las WSNs. Específicamente, desarrollamos un modelo híbrido para el análisis de desempeño y la optimización de protocolos de WSNs de acceso aleatorio y basados en cluster. Los resultados muestran la utilidad de escuchar el medio inalámbrico para minimizar el número de transmisiones y también de modificar las probabilidades de transmisión después de una colisión. En lo que respecta a eMBB, nos enfocamos en un escenario de distribución masiva de contenidos, en el que un mismo contenido es enviado de forma simultánea a un gran número de usuarios móviles. Este escenario es problemático, ya que las estaciones base de la red celular no cuentan con mecanismos eficientes de multicast o broadcast. Por lo tanto, la solución que se adopta comúnmente es la de replicar e contenido para cada uno de los usuarios que lo soliciten; está claro que esto es altamente ineficiente. Para resolver este problema, proponemos el uso de esquemas de network coding y de arquitecturas cooperativas llamadas nubes móviles. En concreto, desarrollamos un protocolo para la distribución masiva de contenidos, junto con un modelo analítico para su optimización. Los resultados demuestran que el modelo propuesto es simple y preciso, y que el protocolo puede reducir el con
La cinquena generació de xarxes mòbils (5G) es troba molt a la vora. S'espera que proveïsca de beneficis extraordinaris a la població i que resolga la majoria dels problemes de les xarxes 4G actuals. L'èxit de 5G, per a la qual ja ha sigut completada la primera fase del qual d'estandardització, depén de tres pilars: comunicacions tipus-màquina massives, banda ampla mòbil millorada, i comunicacions ultra fiables i de baixa latència (mMTC, eMBB i URLLC, respectivament, per les seues sigles en anglés). En aquesta tesi ens enfoquem en el primer pilar de 5G, mMTC, però també proveïm una solució per a aconseguir eMBB en escenaris de distribució massiva de continguts. Específicament, les principals contribucions són en les àrees de: 1) suport eficient de mMTC en xarxes cel·lulars; 2) accés aleatori per al report d'esdeveniments en xarxes sense fils de sensors (WSNs); i 3) cooperació per a la distribució massiva de continguts en xarxes cel·lulars. En l'apartat de mMTC en xarxes cel·lulars, aquesta tesi realitza una anàlisi profunda de l'acompliment del procediment d'accés aleatori, que és la forma mitjançant la qual els dispositius mòbils accedeixen a la xarxa. Aquestes anàlisis van ser inicialment dutes per mitjà de simulacions i, posteriorment, per mitjà d'un model analític. Els models van ser desenvolupats específicament per a aquest propòsit i inclouen un dels esquemes de control d'accés més prometedors: el access class barring (ACB). El nostre model és un dels més precisos que es poden trobar i l'únic que incorpora l'esquema d'ACB. Els resultats obtinguts per mitjà d'aquest model i per simulació són clars: els accessos altament sincronitzats que ocorren en aplicacions de mMTC poden causar congestió severa en el canal d'accés. D'altra banda, també són clars en què aquesta congestió es pot previndre amb una adequada configuració de l'ACB. No obstant això, els paràmetres de configuració de l'ACB han de ser contínuament adaptats a la intensitat d'accessos per a poder obtindre unes prestacions òptimes. En la tesi es proposa una solució pràctica a aquest problema en la forma d'un esquema de configuració automàtica per a l'ACB; l'anomenem ACBC. Els resultats mostren que el nostre esquema pot aconseguir un acompliment molt proper a l'òptim sense importar la intensitat dels accessos. Així mateix, pot ser directament implementat en xarxes cel·lulars per a suportar el trànsit mMTC, ja que ha sigut dissenyat tenint en compte els estàndards del 3GPP. A més de les anàlisis descrites anteriorment per a xarxes cel·lulars, es realitza una anàlisi general per a aplicacions de comptadors intel·ligents. És a dir, estudiem un escenari de mMTC des de la perspectiva de les WSNs. Específicament, desenvolupem un model híbrid per a l'anàlisi de prestacions i l'optimització de protocols de WSNs d'accés aleatori i basats en clúster. Els resultats mostren la utilitat d'escoltar el mitjà sense fil per a minimitzar el nombre de transmissions i també de modificar les probabilitats de transmissió després d'una col·lisió. Pel que fa a eMBB, ens enfoquem en un escenari de distribució massiva de continguts, en el qual un mateix contingut és enviat de forma simultània a un gran nombre d'usuaris mòbils. Aquest escenari és problemàtic, ja que les estacions base de la xarxa cel·lular no compten amb mecanismes eficients de multicast o broadcast. Per tant, la solució que s'adopta comunament és la de replicar el contingut per a cadascun dels usuaris que ho sol·liciten; és clar que això és altament ineficient. Per a resoldre aquest problema, proposem l'ús d'esquemes de network coding i d'arquitectures cooperatives anomenades núvols mòbils. En concret, desenvolupem un protocol per a realitzar la distribució massiva de continguts de forma eficient, juntament amb un model analític per a la seua optimització. Els resultats demostren que el model proposat és simple i precís
The 5th generation (5G) of mobile networks is just around the corner. It is expected to bring extraordinary benefits to the population and to solve the majority of the problems of current 4th generation (4G) systems. The success of 5G, whose first phase of standardization has concluded, relies in three pillars that correspond to its main use cases: massive machine-type communication (mMTC), enhanced mobile broadband (eMBB), and ultra-reliable low latency communication (URLLC). This thesis mainly focuses on the first pillar of 5G: mMTC, but also provides a solution for the eMBB in massive content delivery scenarios. Specifically, its main contributions are in the areas of: 1) efficient support of mMTC in cellular networks; 2) random access (RA) event-reporting in wireless sensor networks (WSNs); and 3) cooperative massive content delivery in cellular networks. Regarding mMTC in cellular networks, this thesis provides a thorough performance analysis of the RA procedure (RAP), used by the mobile devices to switch from idle to connected mode. These analyses were first conducted by simulation and then by an analytical model; both of these were developed with this specific purpose and include one of the most promising access control schemes: the access class barring (ACB). To the best of our knowledge, this is one of the most accurate analytical models reported in the literature and the only one that incorporates the ACB scheme. Our results clearly show that the highly-synchronized accesses that occur in mMTC applications can lead to severe congestion. On the other hand, it is also clear that congestion can be prevented with an adequate configuration of the ACB scheme. However, the configuration parameters of the ACB scheme must be continuously adapted to the intensity of access attempts if an optimal performance is to be obtained. We developed a practical solution to this problem in the form of a scheme to automatically configure the ACB; we call it access class barring configuration (ACBC) scheme. The results show that our ACBC scheme leads to a near-optimal performance regardless of the intensity of access attempts. Furthermore, it can be directly implemented in 3rd Generation Partnership Project (3GPP) cellular systems to efficiently handle mMTC because it has been designed to comply with the 3GPP standards. In addition to the analyses described above for cellular networks, a general analysis for smart metering applications is performed. That is, we study an mMTC scenario from the perspective of event detection and reporting WSNs. Specifically, we provide a hybrid model for the performance analysis and optimization of cluster-based RA WSN protocols. Results showcase the utility of overhearing to minimize the number of packet transmissions, but also of the adaptation of transmission parameters after a collision occurs. Building on this, we are able to provide some guidelines that can drastically increase the performance of a wide range of RA protocols and systems in event reporting applications. Regarding eMBB, we focus on a massive content delivery scenario in which the exact same content is transmitted to a large number of mobile users simultaneously. Such a scenario may arise, for example, with video streaming services that offer a particularly popular content. This is a problematic scenario because cellular base stations have no efficient multicast or broadcast mechanisms. Hence, the traditional solution is to replicate the content for each requesting user, which is highly inefficient. To solve this problem, we propose the use of network coding (NC) schemes in combination with cooperative architectures named mobile clouds (MCs). Specifically, we develop a protocol for efficient massive content delivery, along with the analytical model for its optimization. Results show the proposed model is simple and accurate, and the protocol can lead to energy savings of up to 37 percent when compared to the traditional approach.
Leyva Mayorga, I. (2018). On reliable and energy efficient massive wireless communications: the road to 5G [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/115484
TESIS

The Internet Protocol Multimedia Subsystem (IMS) is a component of the 3G mobile network that has been specified by standards development organisations such as the 3GPP (3rd Generation Partnership Project) and ETSI (European Telecommunication Standards Institute). IMS seeks to guarantee that the telecommunication network of the future provides subscribers with seamless access to services across disparate networks. In order to achieve this, it defines a service architecture that hosts application servers that provide subscribers with value added services. Typically, an application server bundles all the functionality it needs to execute the services it delivers, however this view is currently being challenged. It is now thought that services should be synthesised from simple building blocks called service capabilities. This decomposition would facilitate the re-use of service capabilities across multiple services and would support the creation of new services that could not have originally been conceived. The shift from monolithic services to those built from service capabilities poses a challenge to the current service model in IMS. To accommodate this, the 3GPP has defined an entity known as a service capability interaction manager (SCIM) that would be responsible for managing the interactions between service capabilities in order to realise complex services. Some of these interactions could potentially lead to undesirable results, which the SCIM must work to avoid. As an added requirement, it is believed that the network should allow policies to be applied to network services which the SCIM should be responsible for enforcing. At the time of writing, the functional and structural architecture of the SCIM has not yet been standardised. This thesis explores the current serv ice architecture of the IMS in detail. Proposals that address the structure and functions of the SCIM are carefully compared and contrasted. This investigation leads to the presentation of key aspects of the SCIM, and provides solutions that explain how it should interact with service capabilities, manage undesirable interactions and factor user and network operator policies into its execution model. A modified design of the IMS service layer that embeds the SCIM is subsequently presented and described. The design uses existing IMS protocols and requires no change in the behaviour of the standard IMS entities. In order to develop a testbed for experimental verification of the design, the identification of suitable software platforms was required. This thesis presents some of the most popular platforms currently used by developers such as the Open IMS Core and OpenSER, as well as an open source, Java-based, multimedia communication platform called Mobicents. As a precursor to the development of the SCIM, a converged multimedia service is presented that describes how a video streaming application that is leveraged by a web portal was implemented for an IMS testbed using Mobicents components. The Mobicents SIP Servlets container was subsequently used to model an initial prototype of the SCIM, using a mUlti-component telephony service to illustrate the proposed service execution model. The design focuses on SIP-based services only, but should also work for other types of IMS application servers as well.

Smartphones are proliferating into the workplace at an ever-increasing rate, similarly the threats that they pose is increasing. In an era of constant connectivity and availability, information is freed up of constraints of time and place. This research project delves into the risks introduced by smartphones, and through multiple cases studies, a maturity measurement model is formulated. The model is based on recommendations from two leading information security frameworks, the COBIT 4.1 framework and ISO27002 code of practice. Ultimately, a combination of smartphone specific risks are integrated with key control recommendations, in providing a set of key measurable security maturity components. The subjective opinions of case study respondents are considered a key component in achieving a solution. The solution addresses the concerns of not only policy makers, but also the employees subjected to the security policies. Nurturing security awareness into organisational culture through reinforcement and employee acceptance is highlighted in this research project. Software consultancies can use this model to mitigate risks, while harnessing the potential strategic advantages of mobile computing through smartphone devices. In addition, this research project identifies the critical components of a smartphone security solution. As a result, a model is provided for software consultancies due to the intense reliance on information within these types of organisations. The model can be effectively applied to any information intensive organisation.

Thesis (MScEng)--University of Stellenbosch, 2011.
ENGLISH ABSTRACT: The perceived quality of Voice over Internet Protocol (IP) (VoIP) communication relies on the network which is used to transport voice packets between the end points. Variable network characteristics such as bandwidth, delay and loss are critical for real-time voice traffic and are not always guaranteed by networks. It is important for network service providers to determine the Quality of Service (QoS) it provides to its customers. The solution proposed here is to predict the perceived quality of a VoIP call, in real-time by using network statistics. The main objective of this thesis is to develop a network analysis tool, which gathers meaningful statistics from network traffic. These statistics will then be used for predicting the perceived quality of a VoIP call. This study includes the investigation and deployment of two main components. Firstly, to determine call quality, it is necessary to extract the voice streams from captured network traffic. The extracted sound files can then be analysed by various VoIP quality models to determine the perceived quality of a VoIP call. The second component is the analysis of network characteristics. Loss, delay and jitter are all known to influence perceived call quality. These characteristics are, therefore, determined from the captured network traffic and compared with the call quality. Using the statistics obtained by the repeated comparison of the call quality and network characteristics, a network specific algorithm is generated. This Non-Intrusive Quality Prediction Algorithm (NIQPA) uses basic characteristics such as time of day, delay, loss and jitter to predict the quality of a real-time VoIP call quickly in a non-intrusive way. The realised algorithm for each network will differ, because every network is different. Prediction results can then be used to adapt either the network (more bandwidth, packet prioritising) or the voice stream (error correction, change VoIP codecs) to assure QoS.
AFRIKAANSE OPSOMMING: Die kwaliteit van spraak oor die internet (VoIP) kommunikasie is afhanklik van die netwerk wat gebruik word om spraakpakkies te vervoer tussen die eindpunte. Netwerk eienskappe soos bandwydte, vertraging en verlies is krities vir intydse spraakverkeer en kan nie altyd gewaarborg word deur netwerkverskaffers nie. Dit is belangrik vir die netwerk diensverskaffers om die vereiste gehalte van diens (QoS) te verskaf aan hul kliënte. Die oplossing wat hier voorgestel word is om die kwaliteit van ’n VoIP oproep intyds te voorspel, deur middel van die netwerkstatistieke. Die belangrikste doel van hierdie projek is om ’n netwerk analise-instrument te ontwikkel. Die instrument versamel betekenisvolle statistiek deur van netwerkverkeer gebruik te maak. Hierdie statistiek sal dan gebruik word om te voorspel wat die gehalte van ’n VoIP oproep sal wees vir sekere netwerk toestande. Hierdie studie berus op die ondersoek en implementering van twee belangrike komponente. In die eerste plek, moet oproep kwaliteit bepaal word. Spraakstrome word uit die netwerkverkeer onttrek. Die onttrekte klanklêers kan dan geanaliseer word deur verskeie spraak kwaliteitmodelle om die kwaliteitdegradasie van ’n spesifieke VoIP oproep vas te stel. Die tweede komponent is die analise van netwerkeienskappe. Pakkieverlies, pakkievertraging en bibbereffek is bekend vir hul invloed op VoIP kwaliteit en is waargeneem. Hierdie netwerk eienskappe word dus bepaal uit die netwerkverkeer en daarna vergelyk met die gemete gesprekskwaliteit. Statistiek word verkry deur die herhaalde vergelyking van gesprekkwaliteit en netwerk eienskappe. Uit die statistiek kan ’n algoritme (vir die spesifieke network) gegenereer word om spraakkwaliteit te voorspel. Hierdie Nie-Indringende Kwaliteit Voorspellings-algoritme (NIKVA), gebruik basiese kenmerke, soos die tyd van die dag, pakkie vertraging, pakkie verlies en bibbereffek om die kwaliteit van ’n huidige VoIP oproep te voorspel. Hierdie metode is vinnig, in ’n nie-indringende manier. Die gerealiseerde algoritme vir die verskillende netwerke sal verskil, want elke netwerk is anders. Die voorspelling van spraakgehalte kan dan gebruik word om òf die netwerk aan te pas (meer bandwydte, pakkie prioriteit) òf die spraakstroom aan te pas (foutkorreksie, verander VoIP kodering) om die goeie kwaliteit van ’n VoIP oproep te verseker.

The objective of this dissertation is to propose the cross-layer spectrum management architecture for white space applications that improves the performance the main functions of the spectrum management. In the proposed cross-layer architecture, white space network devices such as white space devices and the spectrum map server cooperate to support the extended spectrum map, the inter-cell transmit power adaptation (ITPA), and the frequency-domain coexistence beacon (FCB). Upon the cross-layer architecture, firstly, white space devices (WSDs) achieve a faster search and higher accuracy in spectrum sensing with the extended spectrum map, the extended DHCP (Dynamic Host Configuration Protocol), and the FCB. Secondly, WSDs achieve the precise selection of their operating channel in spectrum decision with the extended spectrum map and the ITPA. In spectrum sharing, thirdly, the collaboration- based spectrum sharing with the ITPA achieve more accommodation of WSDs by increasing the number of channels shared between WSDs. Finally, WSDs with the FCB and the extended spectrum achieve effective spectrum mobility by obtaining the occupancy-status of channels precisely.

The emerging technology of Cyberphysical systems consists of networked computing, sensing, and actuator devices used to monitor, connect, and control physical phenomena. In order to economically and sustainably operate Cyberphysical systems, their devices need to cooperate over a communication network to solve optimization problems. For example, in smart power grids, smart meters cooperatively optimize the grid performance, and in wireless sensor networks a number of sensors cooperate to find optimal estimators of real-world parameters. A challenging aspect in the design of distributed solution algorithms to these optimization problems is that while the technology advances and the networks grow larger, the communication bandwidth available to coordinate the solution remains limited. Motivated by this challenge, this thesis investigates the convergence of distributed solution methods for resource allocation optimization problems, where gradient information is communicated at every iteration, using limited communication. This problem is approached from three different perspectives, each presented in a separate paper.  The investigation of the three papers demonstrate promises and limits of solving distributed resource allocation problems using limited communication bandwidth. Future work will consider how even more general problems can be solved using limited communication bandwidth and also study different communication constraints.

QC 20170424

En la actualidad, la Internet de las Cosas (Internet of Things, IoT) es una tecnología esencial para la próxima generación de sistemas inalámbricos. La conectividad es la base de IoT, y el tipo de acceso requerido dependerá de la naturaleza de la aplicación. Uno de los principales facilitadores del entorno IoT es la comunicación machine-to-machine (M2M) y, en particular, su enorme potencial para ofrecer conectividad ubicua entre dispositivos inteligentes. Las redes celulares son la elección natural para las aplicaciones emergentes de IoT y M2M. Un desafío importante en las redes celulares es conseguir que la red sea capaz de manejar escenarios de acceso masivo en los que numerosos dispositivos utilizan comunicaciones M2M. Por otro lado, los sistemas celulares han experimentado un tremendo desarrollo en las últimas décadas: incorporan tecnología sofisticada y nuevos algoritmos para ofrecer una amplia gama de servicios. El modelado y análisis del rendimiento de estas redes multiservicio es también una tarea desafiante que podría requerir un gran esfuerzo computacional. Para abordar los desafíos anteriores, nos centramos en primer lugar en el diseño y la evaluación de las prestaciones de nuevos mecanismos de control de acceso para hacer frente a las comunicaciones masivas M2M en redes celulares. Posteriormente nos ocupamos de la evaluación de prestaciones de redes multiservicio y proponemos una nueva técnica analítica que ofrece precisión y eficiencia computacional. Nuestro principal objetivo es proporcionar soluciones para aliviar la congestión en la red de acceso radio cuando un gran número de dispositivos M2M intentan conectarse a la red. Consideramos los siguientes tipos de escenarios: (i) los dispositivos M2M se conectan directamente a las estaciones base celulares, y (ii) forman grupos y los datos se envían a concentradores de tráfico (gateways) que les proporcionan acceso a la infraestructura. En el primer escenario, dado que el número de dispositivos añadidos a la red aumenta continuamente, esta debería ser capaz de manejar el considerable incremento en las solicitudes de acceso. El 3rd Generation Partnership Project (3GPP) ha propuesto el access class barring (ACB) como una solución práctica para el control de congestión en la red de acceso radio y la red troncal. El ajuste correcto de los parámetros de ACB de acuerdo con la intensidad del tráfico es crítico, pero cómo hacerlo de forma dinámica y autónoma es un problema complejo cuya solución no está recogida en las especificaciones del 3GPP. Esta tesis doctoral contribuye al análisis del rendimiento y al diseño de nuevos algoritmos que implementen efectivamente este mecanismo, y así superar los desafíos introducidos por las comunicaciones masivas M2M. En el segundo escenario, dado que la heterogeneidad de los dispositivos IoT y las arquitecturas celulares basadas en hardware imponen desafíos aún mayores para permitir una comunicación flexible y eficiente en los sistemas inalámbricos 5G, esta tesis doctoral también contribuye al diseño de software-defined gateways (SD-GWs) en una nueva arquitectura propuesta para redes inalámbricas definidas por software que se denomina SoftAir. Esto permite manejar tanto un gran número de dispositivos como el volumen de datos que estarán vertiendo en la red. Otra contribución de esta tesis doctoral es la propuesta de una técnica novedosa para el análisis de prestaciones de redes multiservicio de alta capacidad que se basa en un nuevo enfoque del modelizado analítico de sistemas que operan a diferentes escalas temporales. Este enfoque utiliza el análisis del transitorio de una serie de subcadenas absorbentes y lo denominamos absorbing Markov chain approximation (AMCA). Nuestros resultados muestran que para un coste computacional dado, AMCA calcula los parámetros de prestaciones habituales de un sistema con mayor precisión, en comparación con los resultados obtenidos por otr
Nowadays, Internet of Things (IoT) is an essential technology for the upcoming generation of wireless systems. Connectivity is the foundation for IoT, and the type of access required will depend on the nature of the application. One of the leading facilitators of the IoT environment is machine-to-machine (M2M) communication, and particularly, its tremendous potential to offer ubiquitous connectivity among intelligent devices. Cellular networks are the natural choice for emerging IoT and M2M applications. A major challenge in cellular networks is to make the network capable of handling massive access scenarios in which myriad devices deploy M2M communications. On the other hand, cellular systems have seen a tremendous development in recent decades; they incorporate sophisticated technology and algorithms to offer a broad range of services. The modeling and performance analysis of these large multi-service networks is also a challenging task that might require high computational effort. To address the above challenges, we first concentrate on the design and performance evaluation of novel access control schemes to deal with massive M2M communications. Then, we focus on the performance evaluation of large multi-service networks and propose a novel analytical technique that features accuracy and computational efficiency. Our main objective is to provide solutions to ease the congestion in the radio access or core network when massive M2M devices try to connect to the network. We consider the following two types of scenarios: (i) massive M2M devices connect directly to cellular base stations, and (ii) they form clusters and the data is forwarded to gateways that provide them with access to the infrastructure. In the first scenario, as the number of devices added to the network is constantly increasing, the network should handle the considerable increment in access requests. Access class barring (ACB) is proposed by the 3rd Generation Partnership Project (3GPP) as a practical congestion control solution in the radio access and core network. The proper tuning of the ACB parameters according to the traffic intensity is critical, but how to do so dynamically and autonomously is a challenging task that has not been specified. Thus, this dissertation contributes to the performance analysis and optimal design of novel algorithms to implement effectively this barring scheme and overcome the challenges introduced by massive M2M communications. In the second scenario, since the heterogeneity of IoT devices and the hardware-based cellular architectures impose even greater challenges to enable flexible and efficient communication in 5G wireless systems, this dissertation also contributes to the design of software-defined gateways (SD-GWs) in a new architecture proposed for wireless software-defined networks called SoftAir. The deployment of these SD-GWs represents an alternative solution aiming at handling both a vast number of devices and the volume of data they will be pouring into the network. Another contribution of this dissertation is to propose a novel technique for the performance analysis of large multi-service networks. The underlying complexity of the network, particularly concerning its size and the ample range of configuration options, makes the solution of the analytical models computationally costly. However, a typical characteristic of these networks is that they support multiple types of traffic flows operating at different time-scales. This time-scale separation can be exploited to reduce considerably the computational cost associated to determine the key performance indicators. Thus, we propose a novel analytical modeling approach based on the transient regime analysis, that we name absorbing Markov chain approximation (AMCA). For a given computational cost, AMCA finds common performance indicators with greater accuracy, when compared to the results obtained by other approximate methods proposed in the literature.
En l'actualitat, la Internet de les Coses (Internet of Things, IoT) és una tecnologia essencial per a la propera generació de sistemes sense fil. La connectivitat és la base d'IoT, i el tipus d'accés requerit dependrà de la naturalesa de l'aplicació. Un dels principals facilitadors de l'entorn IoT és la comunicació machine-to-machine (M2M) i, en particular, el seu enorme potencial per oferir connectivitat ubiqua entre dispositius intel · ligents. Les xarxes mòbils són l'elecció natural per a les aplicacions emergents de IoT i M2M. Un desafiament important en les xarxes mòbils que actualment está rebent molta atenció és aconseguir que la xarxa siga capaç de gestionar escenaris d'accés massiu en què una gran quantitat de dispositius utilitzen comunicacions M2M. D'altra banda, els sistemes mòbils han experimentat un gran desenvolupament en les últimes dècades: incorporen tecnologia sofisticada i nous algoritmes per oferir una àmplia gamma de serveis. El modelatge i análisi del rendiment d'aquestes xarxes multiservei és també un desafiament important que podria requerir un gran esforç computacional. Per abordar els desafiaments anteriors, en aquesta tesi doctoral ens centrem en primer lloc en el disseny i l'avaluació de les prestacions de nous mecanismes de control d'accés per fer front a les comunicacions massives M2M en xarxes cel · lulars. Posteriorment ens ocupem de l'avaluació de prestacions de xarxes multiservei i proposem una nova tècnica analítica que ofereix precisió i eficiència computacional. El nostre principal objectiu és proporcionar solucions per a alleujar la congestió a la xarxa d'accés ràdio quan un gran nombre de dispositius M2M intenten connectar-se a la xarxa. Considerem els dos tipus d'escenaris següents: (i) els dispositius M2M es connecten directament a les estacions base cel · lulars, i (ii) formen grups i les dades s'envien a concentradors de trànsit (gateways) que els proporcionen accés a la infraestructura. En el primer escenari, atès que el nombre de dispositius afegits a la xarxa augmenta contínuament, aquesta hauria de ser capaç de gestionar el considerable increment en les sol · licituds d'accés. El 3rd Generation Partnership Project (3GPP) ha proposat l'access class barring (ACB) com una solució pràctica per al control de congestió a la xarxa d'accès ràdio i la xarxa troncal. L'ajust correcte dels paràmetres d'ACB d'acord amb la intensitat del trànsit és crític, però com fer-ho de forma dinàmica i autònoma és un problema complex, la solució del qual no està recollida en les especificacions del 3GPP. Aquesta tesi doctoral contribueix a l'anàlisi del rendiment i al disseny de nous algoritmes que implementen efectivament aquest mecanisme, i així superar els desafiaments introduïts per les comunicacions massives M2M en les xarxes mòbils actuals i futures. En el segon escenari, atès que l'heterogeneïtat dels dispositius IoT i les arquitectures cel · lulars basades en hardware imposen desafiaments encara més grans per permetre una comunicació flexible i eficient en els sistemes sense fil 5G, aquesta tesi doctoral també contribueix al disseny de software-defined gateways (SD-GWS) en una nova arquitectura proposada per a xarxes sense fils definides per programari que s'anomena SoftAir. Això permet gestionar tant un gran nombre de dispositius com el volum de dades que estaran abocant a la xarxa. Una altra contribució d'aquesta tesi doctoral és la proposta d'una tècnica innovadora per a l'anàlisi de prestacions de xarxes multiservei d'alta capacitat que es basa en un nou enfocament del modelitzat analític de sistemes que operen a diferents escales temporals. Aquest enfocament utilitza l'anàlisi del transitori d'una sèrie de subcadenes absorbents i l'anomenem absorbing Markov chain Approximation (AMCA). Els nostres resultats mostren que per a un cost computacional donat, AMCA calcula els paràmetres de prestacions habituals d
Tello Oquendo, LP. (2018). Design and Performance Analysis of Access Control Mechanisms for Massive Machine-to-Machine Communications in Wireless Cellular Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/107946
TESIS

The world is getting busier and more crowded each year. Due to this fact resources such as public transport, available energy, and usable space are becoming congested and require vast amounts of logistical support. As of February 2018, nearly 95% of Americans own a mobile cell phone according to the Pew Research Center. These devices are consistently broadcasting their presents to other devices. By leveraging this data to provide occupational awareness of high traffic areas such as public transit stops, buildings, etc logistic efforts can be streamline to best suit the dynamics of the population. With the rise of The Internet of Things, a scalable low-cost occupancy monitoring system can be deployed to collect this broadcasted data and present it to logistics in real time. Simple IoT devices such as the Raspberry Pi, wireless cards capable of passive monitoring, and the utilization of specialized software can provide this capability. Additionally, this combination of hardware and software can be integrated in a way to be as simple as a typical plug and play set up making system deployment quick and easy. This effort details the development and integration work done to deliver a working product acting as a foundation to build upon. Machine learning algorithms such as k-Nearest-Neighbors were also developed to estimate a mobile device's approximate location inside a building.

Orientadores: Mauricio Ferreira Magalhães, Fabio Luciano Verdi
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e Computação
Made available in DSpace on 2018-08-09T14:41:11Z (GMT). No. of bitstreams: 1 Wong_Walter_M.pdf: 1265045 bytes, checksum: 15a2435e5676b973ffe726e4757323e4 (MD5) Previous issue date: 2007
Resumo: A concepção original da arquitetura da Internet foi baseada em uma rede fixa e confiável. Hoje em dia, a Internet se tornou dinâmica e vulnerável aos ataques de segurança. Também não era prevista a necessidade de integração de tecnologias heterogêneas nem de ambientes sem fio. A arquitetura atual apresenta uma série de barreiras técnicas para prover estes serviços, sendo uma das maiores a sobrecarga semântica do Internet Protocol (IP). O endereço IP atua como localizador na camada de rede e como identificador na camada de transporte, impossibilitando novas funcionalidades como a mobilidade e abrindo brechas de segurança. Este trabalho apresenta uma proposta de implementação de uma arquitetura para Internet de nova geração para o provisionamento de novos serviços de forma natural e integrada para a Internet atual. A proposta de arquitetura de implementação oferece suporte à mobilidade, ao multihoming, à segurança, à integração de redes heterogêneas e às aplicações legadas através da introdução de uma nova camada de identificação na arquitetura atual. Esta nova camada tem por objetivo separar a identidade da localização e se tornar uma opção de comunicação para as redes heterogêneas. Mecanismos adicionais foram propostos para prover o suporte às funcionalidades da arquitetura, tais como a resolução de nomes em identificadores, o roteamento baseado no identificador, a gerência de localização e um plano de controle para a troca de mensagens de sinalização fim-a-fim entre os componentes da arquitetura. Para a validação da arquitetura proposta, um protótipo foi implementado e vários testes de desempenho foram realizados para avaliação do overhead da implementação, do modelo de segurança, da robustez e do suporte à mobilidade e às aplicações legadas
Abstract: The original concept of the Internet architecture was based on static and reliable networks. Nowadays, the Internet became more dynamic and vulnerable to security attacks. The integration of heterogeneous technologies and wireless environment were not predicted. The current architecture presents some technical barriers to provide these services. One of these problems is the semantic overload of the Internet Protocol (IP). The IP address acts as locator in the network layer and identifier in the transport layer, preventing new features such as mobility and allowing security flaws. This work presents an implementation proposal of a next generation Internet architecture to provide new services naturally integrated to the Internet. The implementation proposal supports mobility, multihoming, security, heterogeneous networks integration and legacy applications by the introduction of a new identification layer in the current architecture. This new layer will separate the identity from the location and become an option for communication between heterogeneous networks. Additional mechanisms were proposed to support the new functionalities of the architecture, e.g., resolution of names to identifiers, identifier-based routing, location management and a control plane to exchange end-toend signalling control messages between the components of the architecture. In order to evaluate the proposed architecture, a prototype was implemented and some tests were performed considering implementation overhead, security model, robustness and support for mobility and legacy applications
Mestrado
Engenharia de Computação
Mestre em Engenharia Elétrica

Approved for public release, distribution is unlimited
This thesis analyzes the potential impact of incorporating wireless technologies, specifically an 802.11 mesh layer architecture and 802.16 Orthogonal Frequency Division Multiplexing, in order to effectively and more efficiently transmit data and create a symbiotic operational picture between Coast Guard Cutters, their boarding teams, Coast Guard Operation Centers, and various external agencies. Two distinct collaborative software programs, Groove Virtual Office and the Naval Postgraduate School's Situational Awareness Agent, are utilized over the Tactical Mesh and OFDM network configurations to improve the Common Operating Picture of involved units within a marine environment to evaluate their potential impact for the Coast Guard. This is being done to increase the effectiveness and efficiency of Coast Guard units while they carry out their Law Enforcement and Homeland Security Missions. Through multiple field experiments, including Tactical Network Topology and nuclear component sensing with Lawrence Livermore National Laboratory, we utilize commercial off the shelf (COTS) equipment and software to evaluate their impact on these missions.
Lieutenant Commander, United States Coast Guard
Lieutenant, United States Coast Guard

Human body is a complex system organized at different levels such as cells, tissues and organs, which contributes to 11 important organ systems. The functional efficiency of this complex system is evaluated as health. Traditional healthcare is unable to accommodate everyone's need due to the ever-increasing population and medical costs. With advancements in technology and medical research, traditional healthcare applications are shaping into smart healthcare solutions. Smart healthcare helps in continuously monitoring our body parameters, which helps in keeping people health-aware. It provides the ability for remote assistance, which helps in utilizing the available resources to maximum potential. The backbone of smart healthcare solutions is Internet of Things (IoT) which increases the computing capacity of the real-world components by using cloud-based solutions. The basic elements of these IoT based smart healthcare solutions are called "things." Things are simple sensors or actuators, which have the capacity to wirelessly connect with each other and to the internet. The research for this dissertation aims in developing architectures for these things, focusing on IoT-based smart healthcare solutions. The core for this dissertation is to contribute to the research in smart healthcare by identifying applications which can be monitored remotely. For this, application-specific thing architectures were proposed based on monitoring a specific body parameter; monitoring physical health for family and friends; and optimizing the power budget of IoT body sensor network using human body communications. The experimental results show promising scope towards improving the quality of life, through needle-less and cost-effective smart healthcare solutions.

L'Internet des objets (IoT, pour Internet of Things, en anglais) ouvre la porte vers la réalisation de nouvelles applications, telles que les compteurs intelligents et le suivi environnemental, destinées à adresser nos défis sociétaux et écologiques actuels et futurs. Les objets, possiblement mobiles ou distants, nécessitent une connectivité sans fil pour la centralisation des données et le contrôle à distance. Les réseaux longue portée et basse consommation (LPWA, pour Low Power Wide Area, en anglais) offrent des transmissions radio bande étroite avec une couverture à l’échelle typique d’une ville, tout en respectant les contraintes de consommation énergétique bas coût des objets. Intégrer la possibilité de localiser ces objets ajouterait de la valeur à leurs données et permettrait leur suivi géographique. Voilà pourquoi c'est un domaine de recherche très actif actuellement. L'utilisation du temps de propagation des signaux radio de communication, sans intégration supplémentaire de modules matériels dédiés à la localisation, est une approche très intéressante pour la complexité, la consommation et le coût des objets. Néanmoins la radio localisation dans les réseaux LPWA pose des défis liés d'une part aux transmissions à bande étroite qui n'offrent pas une résolution temporelle suffisante et d'autre part aux canaux de propagation qui peuvent introduire des biais sur les estimées de position. Cette thèse adresse ces défis en étudiant un système de mesure multicanaux de distance pour les réseaux LPWA. La combinaison cohérente des signaux bande étroite transmis séquentiellement sur des canaux différents améliore la précision d’estimation des temps de propagation et permet de résoudre en partie les multi-trajets pour une meilleure précision de localisation. Cette technique basée sur les signaux à bande instantanée étroite conserve la capacité longue portée des transmissions et reste compatible avec les réseaux LPWA. Un modèle détaillé prenant en compte les imperfections matérielles ainsi que les besoins protocolaires pour la synchronisation en temps, fréquence et phase est développé. Basé sur ce modèle, les variantes des architectures des émetteurs-récepteurs radios et leurs impacts sur la cohérence de phase pour l’estimation multicanaux de distance sont discutés. Les limites théoriques de précision sont dérivées pour la propagation en espace libre et dans des canaux de propagation multi-trajets, illustrant l’amélioration de précision possible entre l'approche multicanaux et l'approche monocanal pour l'estimation de distance. Des estimateurs de distance sont développés et appliqués aux signaux radio simulés afin de montrer que leurs performances atteignent les limites théoriques. Ces résultats de simulation sont validés avec des expérimentations menées avec un démonstrateur implémenté avec une radio logicielle (SDR, pour Software Defined Radio, en anglais). Les tests terrains réalisés en environnement urbain permettent de confirmer l'apport d'un système d'estimation multicanaux de distance, en combinaison avec du traitement de signal avancé, pour fournir une fonctionnalité de localisation intrinsèque et précise pour les réseaux LPWA
The Internet of Things (IoT) is an enabler to new applications, such as smart metering and environmental monitoring, intended to address current and future societal and ecological challenges. Things, possibly mobile or in distant locations, require wireless connectivity for data collection and remote control. Low Power Wide Area (LPWA) networks provide city-scale long-range, narrowband radio transmissions respecting the energy constraints of battery-powered low-cost objects. Being capable to localize these objects will add value to their data, enables tracking applications and is therefore a demanded and recent research topic. Precise and accurate radio signal delay based positioning without integrating additional hardware but taking advantage of intrinsic wireless communication signals is appealing in terms of device complexity, cost and energy consumption. However, radio localization within LPWA networks is challenging due to narrowband transmissions, resulting in a lack of delay precision as well as due to radio propagation channels, which degrade the accuracy of location estimates. This work addresses both challenges by investigating a multi-channel ranging system for LPWA networks. Coherently combining multiple sequentially transmitted narrowband signals on different radio channels improves delay estimation precision and allows resolving multipath channels for refined positioning accuracy. This scheme, based on instantaneous narrowband signals, conserves the LPWA long-range feature and is hence compatible with LPWA networks. A detailed signal model considering hardware imperfections as well as the required protocol exchanges for time, frequency and phase synchronization is developed. Based on this model, the requirements on radio transceiver architectures regarding the necessary phase coherence for multi-channel ranging are discussed. Lower bounds on the ranging precision are derived for both, free-space and multipath propagation channels, illustrating the improved precision compared to narrowband single channel ranging. Numerical simulations of radio signals for the two-way multi-channel ranging protocol illustrate that the performance of developed range estimators attains the theoretical precision bound and pave the way towards implementation. A flexible Software Defined Radio (SDR) based demonstrator is implemented to validate simulation results. Field trials in real urban outdoor environments are in accordance with simulation results and prove how scalable multi-channel ranging, in combination with advanced signal processing methods, will be an enabler towards precise and accurate localization in LPWA networks

The concept of Industrial Internet of Things (IIoT) is the tangible building block for the realisation of the fourth industrial revolution. It should improve productivity, efficiency and reliability of industrial automation systems, leading to revenue growth in industrial scenarios. IIoT needs to encompass various disciplines and technologies to constitute an operable and harmonious system. One essential requirement for a system to exhibit such behaviour is reliable exchange of information. In industrial automation, the information life-cycle starts at the field level, with data collected by sensors, and ends at the enterprise level, where that data is processed into knowledge for business decision making. In IIoT, the process of knowledge discovery is expected to start in the lower layers of the automation hierarchy, and to cover the data exchange between the connected smart objects to perform collaborative tasks. This thesis aims to assist the comprehension of the processes for information exchange in IIoT-enabled industrial automation- in particular, how reliable exchange of information can be performed by communication systems at field level given an underlying wireless sensor technology, and how data analytics can complement the processes of various levels of the automation hierarchy. Furthermore, this work explores how an IIoT monitoring system can be designed and developed. The communication reliability is addressed by proposing a redundancy-based medium access control protocol for mission-critical applications, and analysing its performance regarding real-time and deterministic delivery. The importance of the data and the benefits of data analytics for various levels of the automation hierarchy are examined by suggesting data-driven methods for visualisation, centralised system modelling and distributed data streams modelling. The design and development of an IIoT monitoring system are addressed by proposing a novel three-layer framework that incorporates wireless sensor, fog, and cloud technologies. Moreover, an IIoT testbed system is developed to realise the proposed framework. The outcome of this study suggests that redundancy-based mechanisms improve communication reliability. However, they can also introduce drawbacks, such as poor link utilisation and limited scalability, in the context of IIoT. Data-driven methods result in enhanced readability of visualisation, and reduced necessity of the ground truth in system modelling. The results illustrate that distributed modelling can lower the negative effect of the redundancy-based mechanisms on link utilisation, by reducing the up-link traffic. Mathematical analysis reveals that introducing fog layer in the IIoT framework removes the single point of failure and enhances scalability, while meeting the latency requirements of the monitoring application. Finally, the experiment results show that the IIoT testbed works adequately and can serve for the future development and deployment of IIoT applications.
SMART (Smarta system och tjänster för ett effektivt och innovativt samhälle)

De nos jours, la croissance du trafic d’informations entraine un développement technologique spectaculaire dans le domaine des télécommunications, qu'il s'agisse de réseau cellulaire, télévision, satellite, WIFI ou autres applications. Cette révolution a engendré d'énormes besoins et suscite une évolution technologique prodigieuse dans le domaine de la conception des antennes. Ces dernières se doivent de répondre aux différentes exigences, telles que la diminution de l’encombrement et des interférences électromagnétiques, la robustesse à l’environnement proche, l'augmentation du gain, l'élargissement de la bande passante, l’intelligence, etc. Les travaux menés dans cette thèse s’orientent surtout vers la conception de nouvelles topologies d’antennes simples, à faible encombrement, intelligentes, insensibles à l’environnement, large et ultra large bande… Notre intérêt s’est porté sur les antennes à résonateurs diélectriques (ARD). Dans le domaine de l’internet des objets, nous avons conçu et réalisé une antenne filtre, à base d’une jonction fente-résonateur diélectrique de forme rectangulaire en vue d’une intégration dans les dispositifs dédiés à ces applications. Pour des applications liées à la télémétrie, et plus précisément les compteurs intelligents, nous avons conçu et réalisé une antenne à base d’un résonateur diélectrique de forme cylindrique. Ces antennes intégrées dans des dispositifs où les sources de perturbations sont très présentes, ont montré une grande robustesse et une insensibilité à leur proche environnement. Par ailleurs, nous avons proposé deux nouvelles topologies d’antennes larges et ultra larges bandes. La première est un anneau cylindrique, constitué de quatre quartiers avec deux permittivités différentes. Un gap d’air a été introduit séparant le résonateur en deux. Cette structure innovante, confère à notre antenne une large bande et des caractéristiques de rayonnement stables. Cette antenne a servi comme élément de base pour proposer une antenne réseau agile en diagramme de rayonnement. La seconde, est dans la continuité de la première structure pour laquelle nous avons adopté une nouvelle technique d’alimentation ainsi qu’une diminution des dimensions du plan de masse. L’antenne obtenue propose alors des caractéristiques adaptées à des applications ultra large bande
Nowadays, the constant increase of information traffic leads to a spectacular technological development in the field of telecommunications, whether it is cellular network, television, satellite, WIFI or other applications. This revolution is creating new needs and is inspiring a phenomenal technological evolution in the field of antenna design. Modern antennas in fact must meet increasingly harder requirements in terms of compactness, electromagnetic interference reduction, robustness to environment, increased gain, broadband bandwidth, intelligence, etc. The work carried out in this thesis mainly focuses on the design of new simple antenna topologies of small size, intelligent, insensitive to environment, broad and ultra-wide band. In particular, our interest focused on antennas based on Dielectric Resonators (DRs). In the field of the Internet of Things (IoT), we designed and realized a high-Q filter antenna based on a slot loaded rectangular dielectric resonator suitable for integration in compact IoT devices. We also designed and characterized an antenna based on a cylindrical shaped dielectric resonator (CDR). This antenna, which has been proposed to be integrated in smart meter devices, where interference sources are very present, has shown a great robustness to the surrounding environment. In addition, we proposed two new broadband and ultra-wideband antenna topologies. The first one is based on a cylindrical ring resonator, divided in four quarters characterized by two different permittivities. An air gap was inserted separating the resonator in two parts. This innovative structure gives our antenna a wide band behavior and stability in terms of radiation pattern. This structure has been used in an array configuration to achieve a reconfigurable radiation pattern. Starting from this work, the second antenna achieves an ultra-wideband behavior by adopting a new feeding technique as well as a reduced ground plane

In recent years, Optical Wireless (OW) communication techniques have attracted substantial attention as a benefit of their abundant spectral resources in the optical domain, which is a potential solution for satisfying the ever-increasing demand for increased wireless capacity in the conventional Radio Frequency (RF) band. Motivated by the emerging techniques and applications of OW communication, the Institute of Electrical and Electronics Engineers (IEEE) had released the IEEE standard 802.15.7 for short-range optical wireless communications, which categorised the Physical layer (PHY) of the OW communication into three candidate-solutions according to their advantages in different applications and environments: 1) Physical-layer I (PHY I): Free Space Optical (FSO)communication employs high-intensity Light Emitting Diodes (LEDs) or Laser Diodes (LDs) as its transmitter. 2) Physical-layer II (PHY II) uses cost-effective, low-power directional white LEDs for the dual function of illumination and communication. 3) Physical III (PHY-III) relies on the so-called Colour-Shift Keying (CSK) modulation scheme for supporting high-rate communication. Our investigations can be classified into three major categories, namely Optical Orthogonal Frequency Division Multiplexing (OFDM) based Multiple-Input Multiple-Output (MIMO) techniques for FSO communications in the context of PHY I, video streaming in PHY-II and the analysis and design of CSK for PHY-III. To be more explicit, in Chapter 2 we first construct a novel ACO-OFDM based MIMO system and investigate its performance under various FSO turbulence channel conditions. However, MIMO systems require multiple optical chains, hence their power consumption and hardware costs become substantial. Hence, we introduced the concept of Aperture Selection (ApS) to mitigate these problems with the aid of a simple yet efficient ApS algorithm for assisting our ACO-OFDM based MIMO system. Since the channel conditions of indoor Visible Light Communication (VLC) environments are more benign than the FSO-channels of Chapter 2, directional white LEDs are used to create an “attocell” in Chapter 3. More specifically, we investigate video streaming in a multi-Mobile Terminals (MTs) indoor VLC system relying on Unity Frequency Reuse (UFR) as well as on Higher Frequency Reuse Factor based Transmission (HFRFT) and on Vectored Transmission (VT) schemes. We minimise the distortion of video streaming, while satisfying the rate constraints as well as optical constraints of all the MTs. In Chapter 4 we analyse the performance of CSK relying both on joint Maximum Likelihood (ML) Hard-Detection (HD), as well as on the the Maximum A posteriori (MAP) criterion-based Soft-Detection (SD) of CSK. Finally, we conceive both two- stage and three-stage concatenated iterative receivers capable of achieving a substantial iteration gain, leading to a vanishingly low BER.

In recent years, due to the rapid convergence of multimedia services, Internet and wireless communications, there has been a growing trend of heterogeneity (in terms of channel bandwidths, mobility levels of terminals, end-user quality-of-service (QoS) requirements) for emerging integrated wired/wireless networks. Moreover, in nowadays systems, a multitude of users coexists within the same network, each of them with his own QoS requirement and bandwidth availability. In this framework, embedded source coding allowing partial decoding at various resolution is an appealing technique for multimedia transmissions. This dissertation includes my PhD research, mainly devoted to the study of embedded multimedia bitstreams in heterogenous networks, developed at the University of Bologna, advised by Prof. O. Andrisano and Prof. A. Conti, and at the University of California, San Diego (UCSD), where I spent eighteen months as a visiting scholar, advised by Prof. L. B. Milstein and Prof. P. C. Cosman. In order to improve the multimedia transmission quality over wireless channels, joint source and channel coding optimization is investigated in a 2D time-frequency resource block for an OFDM system. We show that knowing the order of diversity in time and/or frequency domain can assist image (video) coding in selecting optimal channel code rates (source and channel code rates). Then, adaptive modulation techniques, aimed at maximizing the spectral efficiency, are investigated as another possible solution for improving multimedia transmissions. For both slow and fast adaptive modulations, the effects of imperfect channel estimation errors are evaluated, showing that the fast technique, optimal in ideal systems, might be outperformed by the slow adaptive modulation, when a real test case is considered. Finally, the effects of co-channel interference and approximated bit error probability (BEP) are evaluated in adaptive modulation techniques, providing new decision regions concepts, and showing how the widely used BEP approximations lead to a substantial loss in the overall performance.

Orientadores: Edmundo Roberto Mauro Madeira, Luiz Fernando Bittencourt
Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Computação
Made available in DSpace on 2018-08-24T15:34:12Z (GMT). No. of bitstreams: 1 Meneguette_RodolfoIpolito_D.pdf: 3843404 bytes, checksum: 77fcd1e3b13f66d77af6e7537e8105fc (MD5) Previous issue date: 2013
Resumo: Redes Ad Hoc Veiculares (VANETs) constituem uma subclasse das redes Ad Hoc móveis que provê uma conexão sem fio entre veículos bem como entre veículos e dispositivos de acostamento. Essas redes proveem aplicações que focam na segurança do condutor, em fornecer maior eficiência do tráfego dos veículos nas vias públicas e em trazer algum conforto e entretenimento para os passageiros ao longo de sua viagem. Algumas dessas aplicações precisam estar conectadas com a internet através de um ponto de acesso que encontra-se no acostamento, como uma torre celular ou uma torre WiFi. Essa conexão pode gerar uma sobrecarga de mensagens de controle e pode sofrer uma troca de ponto de acesso que impacta no desempenho da aplicação. Além da interface de conexão com o ponto de acesso, o veículo é equipado com várias outras interfaces de redes vinculadas a diferentes tecnologias, podendo tirar vantagens do uso simultâneo dessas diversas interfaces de rede, com isso, maximizando a vazão e diminuindo a latência. Entretanto, esse uso pode aumentar ainda mais a sobrecarga das mensagens de controle, tendo como consequencia o aumento do tempo de troca de um ponto de acesso a outro, afetando a vazão da rede e o seu desempenho. Para superar esses desafios e prover uma boa qualidade de serviço para a aplicação, ou seja, atender aos requisitos mínimos que as aplicações das redes veiculares necessitam, desenvolvemos e avaliamos uma arquitetura para o gerenciamento de mobilidade de fluxo baseado nas classes de aplicações das redes veiculares. A arquitetura tem como objetivo minimizar o tempo da troca de conexão do fluxo, diminuir a quantidade de perda de pacotes e diminuir o tempo de entrega das mensagens, a fim de cumprir com os requisitos mínimos das classes de aplicação veicular, bem como maximizar o desempenho das aplicações. A arquitetura foi implementada no Network Simulator versão 3 para análise do comportamento da arquitetura em diversos tipos de cenário de simulação. Além da análise da arquitetura, também foram analisados alguns dos seus módulos separadamente. O resultado dessas análises, tanto dos módulos como da arquitetura, mostrou que a arquitetura proposta apresentou um baixo tempo de entrega, com menor perda de pacotes e menor atraso
Abstract: Vehicular Ad Hoc Networks (VANETs) constitutes a subclass of mobile Ad Hoc Networks that provides a wireless connection between vehicles and between vehicles and roadside devices. These networks provide applications that focus on driver safety, traffic efficiency of vehicles on public roads, and in the comfort and entertainment to passengers throughout their journey. Some of these applications need to be connected to the Internet via an access point in the roadside, like a cell tower or WiFi tower. This connection can generate an overhead of control messages and could suffer a change of access point that can impact the performance of the application. Besides the interface connected to the access point, the vehicle is equipped with other network interfaces linked with different technologies, thus the vehicular application can take advantage of the simultaneous use of these various network interfaces, thereby maximizing throughput and reducing latency. However, this use can increase the overhead of control message, and the time of exchange of one access point to another, thus affecting the network throughput and consequently the performance of the application. To overcome these challenges and provide a good quality of service to the application, i.e., attend the minimum requirements that applications for vehicular networks need, we developed and evaluated an architecture for flow mobility management based on classes of applications of vehicular networks. The architecture aims to minimize the time of the exchange of the connection flow, decrease the amount of packet loss, and reduce the delivery time of messages in order to comply with the minimum requirements for vehicular application classes as well as to maximize the application performance. The architecture was implemented in Network Simulator version 3 to analyze the behavior of the architecture in various types of scenarios. Besides the analysis of the architecture, we also analyzed some of the modules of the architecture separately. The results of these analyses of both the architecture and its modules showed a low delivery time, lower packet loss and lower delay
Doutorado
Ciência da Computação
Doutor em Ciência da Computação

This thesis has aimed to explore an application of Multibiometrics to secured wireless communications. The medium of study for this purpose included Wi-Fi, 3G, and WiMAX, over which simulations and experimental studies were carried out to assess the performance. In specific, restriction of access to authorized users only is provided by a technique referred to hereafter as multibiometric cryptosystem. In brief, the system is built upon a complete challenge/response methodology in order to obtain a high level of security on the basis of user identification by fingerprint and further confirmation by verification of the user through text-dependent speaker recognition. First is the enrolment phase by which the database of watermarked fingerprints with memorable texts along with the voice features, based on the same texts, is created by sending them to the server through wireless channel. Later is the verification stage at which claimed users, ones who claim are genuine, are verified against the database, and it consists of five steps. Initially faced by the identification level, one is asked to first present one’s fingerprint and a memorable word, former is watermarked into latter, in order for system to authenticate the fingerprint and verify the validity of it by retrieving the challenge for accepted user. The following three steps then involve speaker recognition including the user responding to the challenge by text-dependent voice, server authenticating the response, and finally server accepting/rejecting the user. In order to implement fingerprint watermarking, i.e. incorporating the memorable word as a watermark message into the fingerprint image, an algorithm of five steps has been developed. The first three novel steps having to do with the fingerprint image enhancement (CLAHE with 'Clip Limit', standard deviation analysis and sliding neighborhood) have been followed with further two steps for embedding, and extracting the watermark into the enhanced fingerprint image utilising Discrete Wavelet Transform (DWT). In the speaker recognition stage, the limitations of this technique in wireless communication have been addressed by sending voice feature (cepstral coefficients) instead of raw sample. This scheme is to reap the advantages of reducing the transmission time and dependency of the data on communication channel, together with no loss of packet. Finally, the obtained results have verified the claims.