Log in

Relevant bibliographies by topics / Zr-based alloys

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Zr-based alloys'

Author: Grafiati

Published: 8 June 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Zr-based alloys.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Zr-based alloys"

1

Lee, Dong-Myoung, Ju-Hyun Sun, Dong-Han Kang, Seung-Yong Shin, and Chi-Whan Lee. "Experimental investigation of Zr-rich Zr–Zr2Ni–(Zr,Ti)2Ni ternary eutectic system." Journal of Materials Research 24, no. 7 (2009): 2338–45. http://dx.doi.org/10.1557/jmr.2009.0268.

Full text

Abstract:

As potential substitutes for traditional Ti(Zr)–Cu–Ni-based brazing metals for high strength Ti alloys as well as a study for metallic glass, Zr–Ti–Ni-based alloys have been attracting much attention recently. In this study, the melting temperatures and microstructures of the Zr(Ti)-rich Zr–Ti–Ni alloys with Ni content below 33.3 at.% were systematically studied. A ternary deep eutectic alloy consisting of three phases was found at the composition of Zr50Ti26Ni24 with a solidus temperature of 798 °C and a liquidus temperature of 809 °C, which are significantly lower than the Zr2Ni–(Zr,Ti)2Ni p

APA, Harvard, Vancouver, ISO, and other styles

2

Dong, Quan, and Jun Tan. "Advances in Zr-Based Alloys." Crystals 14, no. 4 (2024): 351. http://dx.doi.org/10.3390/cryst14040351.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Yoshihara, Michiko. "Influence of Zr Addition on Oxidation Behavior of TiAl-Based Alloys." Materials Science Forum 696 (September 2011): 360–65. http://dx.doi.org/10.4028/www.scientific.net/msf.696.360.

Full text

Abstract:

The alloys based on γ-TiAl have attractive properties as light weight heat-resisting material. The poor oxidation resistance is one of the drawbacks to limit their application. This results from the high growth rate of TiO2 in the scale and the spallation of the oxide scale during cooling. In the present study, the influence of Zr addition on the oxidation behavior of TiAl has been investigated with emphasis on scale adherence. The oxidation behavior of Ti-45Al (in mol %), Ti-45Al-6Nb alloys containing 0 - 0.2% Zr, Ti-Nb and Ti-Zr binary alloys were investigated. The oxide scale was analyzed b

APA, Harvard, Vancouver, ISO, and other styles

4

Okai, Daisuke, Kentaro Mori, Gaku Motoyama, Hisamichi Kimura, and Hidemi Kato. "Amorphousization and Superconducting Property for Zr-Nb Based Alloy." Materials Science Forum 783-786 (May 2014): 2503–8. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.2503.

Full text

Abstract:

The amorphousization of Zr65Nb35 alloy was performed. The Zr-Nb based alloys contained Al and Co elements were fabricated by arc-melting and melt-spinning methods. The superconducting property of the Zr(65-x)Nb35-xAlx (x = 0~15 at%) and Zr(65-x)Nb20Al15Cox alloys (x = 3~10 at%) was investigated by magnetic susceptibility measurements. The Zr(65-x)Nb20Al15Cox metallic glasses (x = 6~10 at%) with superconducting nanocrystalline particles dispersed in an amorphous matrix exhibited a superconductivity below about 3.5 K. The addition of Co element led drastically to the amorphousization of the supe

APA, Harvard, Vancouver, ISO, and other styles

5

Han, Yu, Bao An Chen, Zhi Xiang Zhu, Dong Yu Liu, and Yan Qiu Xia. "Effects of Zr on Microstructure and Conductivity of Er Containing Heat-Resistant Aluminum Alloy Used for Wires." Materials Science Forum 852 (April 2016): 205–10. http://dx.doi.org/10.4028/www.scientific.net/msf.852.205.

Full text

Abstract:

It has particular heat-resistant property and conductivity of high-conductivity heat-resistant Aluminium alloys, which would be wildly applied in transmission and transformation flied. Al-Er-Zr alloys containing different content of Zr were prepared. The effect of Zr on microstructure of heat-resistance Aluminum alloy were studied by using of STEM, and thermodynamic behavior of Zr in Aluminium alloy was analyzed based on the theory of alloy phase formation. The results showed that the effect of Zr content on the grain size of heat-resistant aluminum alloy was remarkable, and the conductivity o

APA, Harvard, Vancouver, ISO, and other styles

6

Nagy, E., Dóra Janovszky, Mária Svéda, et al. "Investigation of Crystallization in an Amorphous Cu-Based Alloy by X-Ray." Materials Science Forum 589 (June 2008): 131–36. http://dx.doi.org/10.4028/www.scientific.net/msf.589.131.

Full text

Abstract:

Recently one of the most significant research-field in the development of amorphous alloys is the research of the Cu-based amorphous alloys. The Zr-based alloys developed earlier can be replaced by the newly developed Cu-based alloys as the high price of the Zr-based alloys limits their utilization in spite of their favourable properties. Production of Cu-based alloys having the same or more favourite properties than Zr-based alloys is cheaper and this fact can promote their increasing utilization. Cu-Zr-Ti and Cu-Hf-Ti alloy systems – they are Cu-based alloys – have excellent mechanical prope

APA, Harvard, Vancouver, ISO, and other styles

7

Matsumoto, N., Yasuyuki Kaneno, and Takayuki Takasugi. "Strengthening and Ductilization of D0₃-Type Fe₃Al Intermetallic Alloys by Dispersion of Laves Phases Fe₂Zr and Fe₂Nb." Materials Science Forum 561-565 (October 2007): 395–98. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.395.

Full text

Abstract:

Zr and/or Nb added Fe3Al based intermetallic alloys (i.e., Fe3Al-Zr, Fe3Al-Nb and Fe3Al-Zr-Nb) were arc-melted, homogenized, hot-rolled and then annealed to evaluate microstructure and tensile property at room temperature as well as at a high temperature (873K). After annealing, the rolled alloys exhibited a recrystallized microstructure containing coarse second phase particles, except for the Nb-added alloy with a minor content of Nb. Relatively high tensile elongation as well as high tensile strength was observed at room temperature in the Zr-added alloys with a minor amount of Zr. Also, the

APA, Harvard, Vancouver, ISO, and other styles

8

Yang, Kun, Yanghe Wang, Jingjing Tang та ін. "Phase Field Study on the Spinodal Decomposition of β Phase in Zr–Nb-Ti Alloys". Materials 16, № 8 (2023): 2969. http://dx.doi.org/10.3390/ma16082969.

Full text

Abstract:

In this study, a phase field method based on the Cahn–Hilliard equation was used to simulate the spinodal decomposition in Zr-Nb-Ti alloys, and the effects of Ti concentration and aging temperature (800–925 K) on the spinodal structure of the alloys for 1000 min were investigated. It was found that the spinodal decomposition occurred in the Zr-40Nb-20Ti, Zr-40Nb-25Ti and Zr-33Nb-29Ti alloys aged at 900 K with the formation of the Ti-rich phases and Ti-poor phases. The spinodal phases in the Zr-40Nb-20Ti, Zr-40Nb-25Ti and Zr-33Nb-29Ti alloys aged at 900 K were in an interconnected non-oriented

APA, Harvard, Vancouver, ISO, and other styles

9

Cao, Peng Jun, Ji Ling Dong, and Hai Dong Wu. "Research on Cu-Based Bulk Glassy Alloys and its Mechanical Properties." Applied Mechanics and Materials 329 (June 2013): 127–32. http://dx.doi.org/10.4028/www.scientific.net/amm.329.127.

Full text

Abstract:

High-strength Cu-based bulk glassy alloys with a large supercooled liquid region in Cu-Zr-Ti-Ni systems were prepared by means of copper mold casting. The Cu-based bulk glassy alloys samples were tested by X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and Instron testing machine. The result indicates, the maximum diameter was 5.0 mm for the Cu55Zr25Ti15Ni5 bulk glassy alloy. The temperature interval of supercooled liquid region (ΔTx) is as large as 45.48-70.98 K for the Cu-Zr-Ti-Ni alloy. The Cu-based glassy alloys rods exhibited the very

APA, Harvard, Vancouver, ISO, and other styles

10

DEY, G. K., R. T. SAVALIA, S. NEOGY, R. TEWARI, D. SRIVASTAVA, and S. BANERJEE. "FORMATION OF NANOCRYSTALS IN ZIRCONIUM-BASED ALLOYS." International Journal of Nanoscience 04, no. 05n06 (2005): 901–7. http://dx.doi.org/10.1142/s0219581x05003863.

Full text

Abstract:

The formation of nanocrystals in Zr -based alloys through three different routes, viz by rapid solidification of alloys, by crystallization of rapidly solidified metallic glasses and by crystallization of bulk metallic glasses has been described. The nanocrystal forming behaviors of rapidly solidified metallic glasses and bulk metallic glasses have been compared and contrasted. The rapidly solidified alloys, which have been examined for this purpose, are Zr 76 Fe 24-x Ni x (x = 0,4,8,12,16,24) and Zr 69.5 Cu 12 Ni 11 Al 7.5. In the Zr 69.5 Cu 12 Ni 11 Al 7.5 alloy, formation of a quasicrystall

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Zr-based alloys"

1

Scarfone, Roberto. "Mechanical spectroscopy of Zr-based bulk glass forming alloys." [S.l. : s.n.], 2002. http://deposit.ddb.de/cgi-bin/dokserv?idn=964907925.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Pauly, Simon. "Phase formation and mechanical properties of metastable Cu-Zr-based alloys." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-39545.

Full text

Abstract:

In the course of this PhD thesis metastable Cu50Zr50-xTix (0≤ x ≤ 10) and (Cu0.5Zr0.5)100-xAlx (5 ≤ x ≤ 8) alloys were prepared and characterised in terms of phase formation, thermal behaviour, crystallisation kinetics and most importantly in terms of mechanical properties. The addition of Al clearly enhances the glass-forming ability although it does not affect the phase formation. This means that the Cu-Zr-Al system follows the characteristics of the binary Cu-Zr phase diagram, at least for Al additions up to 8 at.%. Conversely, the presence of at least 6 at.% Ti changes the crystallisation

APA, Harvard, Vancouver, ISO, and other styles

3

Asgharzadeh, Javid Fatemeh. "Phase formation, martensitic transformation and mechanical properties of Cu-Zr-based alloys." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-210276.

Full text

Abstract:

Die Motivation zur Untersuchung ternärer und quaternären CuZr-Legierungen bestand in der Annahme, dass die Zugabe von Kobalt den Stabilitätsbereich von B2 CuZr bis zur Raumtemperatur erweitert und Aluminium einen signifikanten Effekt auf die Glasbildungsfähigkeit des CuZr-Systems hat. Die vorliegende Dissertation befasst sich mit der Herstellung und Charakterisierung von Cu50-xCoxZr50 (0 ≤ x ≤ 20) und Cu50-xCoxZr45Al5- (x = 2, 5, 10 und 20) Legierungen. Hierbei wurden die Phasenbildung, die thermische Stabilität, die Mikrostruktur, die Martensitbildung und die mechanischen Eigenschaften der Le

APA, Harvard, Vancouver, ISO, and other styles

4

Waniuk, Theodore Andrew Johnson W. L. "Viscosity and crystallization in a series of Zr-based bulk amorphous alloys /." Diss., Pasadena, Calif. : California Institute of Technology, 2004. http://resolver.caltech.edu/CaltechETD:etd-06102004-214551.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kobold, Raphael [Verfasser], Dieter M. [Gutachter] Herlach, and Ulrich [Gutachter] Köhler. "Crystal growth in undercooled melts of glass forming Zr-based alloys / Raphael Kobold. Gutachter: Dieter M. Herlach ; Ulrich Köhler." Bochum : Ruhr-Universität Bochum, 2016. http://d-nb.info/1109051654/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Pauly, Simon [Verfasser], Jürgen [Akademischer Betreuer] Eckert, and Gianaurelio [Akademischer Betreuer] Cuniberti. "Phase formation and mechanical properties of metastable Cu-Zr-based alloys / Simon Pauly. Gutachter: Jürgen Eckert ; Gianaurelio Cuniberti. Betreuer: Jürgen Eckert." Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://d-nb.info/1069938998/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Asgharzadeh, Javid Fatemeh [Verfasser], Jürgen [Akademischer Betreuer] Eckert, and Michael [Gutachter] Zehetbauer. "Phase formation, martensitic transformation and mechanical properties of Cu-Zr-based alloys / Fatemeh Asgharzadeh Javid ; Gutachter: Michael Zehetbauer ; Betreuer: Jürgen Eckert." Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://d-nb.info/1119362547/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Borroto, Ramírez Alejandro. "Synthesis, structure and properties of zirconium-based binary alloy thin films." Electronic Thesis or Diss., Université de Lorraine, 2019. http://www.theses.fr/2019LORR0057.

Full text

Abstract:

Dans cette thèse, nous démontrons que des nanostructures originales peuvent être obtenues en travaillant autour de la transition cristallin/amorphe dans des films minces déposés par pulvérisation cathodique. En particulier, nous étudions deux systèmes, Zr-Mo et Zr-W, dans lesquels une telle transition se produit. Dans ce système, lorsque la teneur en Mo est réduite, une transition structurale d’une solution solide nanocristalline de Zr dans le réseau bbc de Mo à une structure amorphe peut être obtenue autour de 60 at % de Mo. Les films obtenus présentent une dureté H élevée, un faible module d

APA, Harvard, Vancouver, ISO, and other styles

9

Corwin, Peter E. "Synthesis and Characterization of Titanium Zirconium Based Alloys for Capacitor Use." Case Western Reserve University School of Graduate Studies / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=case1363616395.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Sobol, O. V., A. A. Andreev, and V. Gorban. "Structural-Strained State and Mechanical Characteristics of Single-Phase Vacuum-Arc Coatings of Multicomponent High Entropy System Ti-V-Zr-Nb-Hf and Nitrides Based On It." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34808.

Full text

Abstract:

In this work was shown the high stability of the single-phase structural state of high entropy alloy of Ti-V-Zr-Nb-Hf system in a vacuum-arc method of obtaining of coatings based on it. In the process of deposition single-phase high entropy coatings with bcc-lattice which characterizes the cast state are formed in vacuum, and upon obtaining in a nitrogen atmosphere single-phase nitride superhard coatings based on fcc-metal lattice are formed. Such a stability of structure of multi-element alloy to high temperature evaporation and deposition from high-energy plasma flows allows to use the

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Zr-based alloys"

1

K, Soppet W., U.S. Nuclear Regulatory Commission. Division of Systems Analysis and Regulatory Effectiveness., and Argonne National Laboratory, eds. Air oxidation kinetics for Zr-based alloys. U.S. Nuclear Regulatory Commission, Division of Systems Analysis and Regulatory Effectiveness, Office of Nuclear Regualtory Research, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ren, Binyan. The recrystallization of an Al-Li-Zr based alloy. 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Zr-based alloys"

1

Bhattacharjee, T., T. T. Sasaki, B. C. Suh, et al. "Role of Zr in the Microstructure Evolution in Mg-Zn-Zr Based Wrought Alloys." In Magnesium Technology 2015. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093428.ch39.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bhattacharjee, T., T. T. Sasaki, B. C. Suh, et al. "Role of Zr in the Microstructure Evolution in Mg-Zn-Zr Based Wrought Alloys." In Magnesium Technology 2015. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48185-2_39.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Takasaki, Akito, Łukasz Gondek, Joanna Czub, Alicja Klimkowicz, Antoni Żywczak, and Konrad Świerczek. "Hydrogen Storage in Ti/Zr-Based Amorphous and Quasicrystal Alloys." In Hydrogen Storage Technologies. John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119460572.ch4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Fukumoto, Shinji, Kana Fujiwara, Yoshihiko Yokoyama, Yoshihiro Murakami, and Atsushi Yamamoto. "Small-Scale Resistance Spot Welding of Zr Based Glassy Alloys." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.1307.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Gosmanová, Galina, Ivo Kraus, Michal Kolega, and Věra Vrtílková. "X-Ray Diffraction Analysis of Oxide Layers of Zr-Based Alloys." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-469-3.237.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Isaenkova, Margarita, Yuriy Perlovich, V. Fesenko, et al. "Plastic Deformation of Zr-Based Alloys at Temperatures of Phase Transformations." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-434-0.637.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sinning, H. R., I. S. Golovin, and A. Jianu. "Mechanical Spectroscopy of Quasicrystal Formation from Amorphous Ti- and Zr-based Alloys." In Solid State Transformation and Heat Treatment. Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527604839.ch17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Isaenkova, Margarita, and Yuriy Perlovich. "Texture Aspects of Delayed Hydride Cracking in Products from Zr-Based Alloys." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470444191.ch60.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lee, Dong Geun, Yont Tai Lee, Jong Taek Yeon, Jeoung Han Kim, Nho Kwang Park, and Sung Hak Lee. "Effect of Crystalline Phase on Dynamic Deformation Properties of Zr-Based BMG Alloys." In THERMEC 2006. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.5031.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Isaenkova, Margarita, and Yuriy Perlovich. "Distribution of Dislocation Density in Tubes from Zr-Based Alloys by X-Ray Data." In Solid State Phenomena. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/3-908451-09-4.89.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Zr-based alloys"

1

Dali, Y., M. Tupin, P. Bossis, and M. Pijolat. "Effect of Alloying Elements on the Oxidation Kinetics of Zirconium Based Alloys under High Pressure Steam." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07601.

Full text

Abstract:

Abstract The corrosion behaviour of different zirconium based alloys has been studied at various steam pressures. The objectives of this work were to understand and explain the effect of alloying elements and steam pressure on the corrosion resistance. The precipitate free alloys, like “pure” Zr and the binary alloy Zr-1.15%Sn, show catastrophic corrosion rates at high pressure while their behaviour at low steam pressure is similar to that of Zy4, which is almost insensitive to pressure change. As already observed, the corrosion rate of Zr-xNb alloys depends on the niobium concentration in the

APA, Harvard, Vancouver, ISO, and other styles

2

Kim, Young-Jin, and Raul B. Rebak. "Photo-Electrochemistry of Zirconium Alloys in High Temperature Water – a Review." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09417.

Full text

Abstract:

Abstract Zirconium alloys such as Zircaloy-2 and -4 are used as fuel cladding materials in nuclear power plants. These alloys have adequate corrosion resistance in high temperature aqueous conditions. For cladding applications is desirable when Zr alloys form a thin adherent lustrous oxide covering the entire surface of the component. However, under abnormal conditions spots of accelerated oxidation (corrosion) may develop. The two main anomalous mechanisms are nodular corrosion and shadow corrosion. Shadow corrosion may develop on Zr alloy components that are “facing” in close proximity other

APA, Harvard, Vancouver, ISO, and other styles

3

Kim, Young J., Frank Wagenbaugh, Timothy B. Jurewicz, R. J. Blair, and Raul B. Rebak. "Environmental Behavior of Light Water Reactor Accident Tolerant Candidate Cladding Materials under Design Conditions." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05817.

Full text

Abstract:

Abstract Compared to the standard UO2–Zirconium (Zr) based system, accident tolerant nuclear fuels need to tolerate loss of active cooling in the core for a considerably longer time period while maintaining or improving the fuel performance during normal operation conditions. Advanced steels such as iron-chromium-aluminum-molybdenum (FeCrAlMo) alloys are being investigated both under normal operation conditions in high temperature water (e.g. 288°C) and under accident conditions for reaction with super-heated steam up to 1400°C. Several commercial alloys were tested for resistance to corrosion

APA, Harvard, Vancouver, ISO, and other styles

4

Schuster, Michael, Cole J. Crawford, and Raul B. Rebak. "Thermal Shock Resistance of FeCrAl Alloys for Accident Tolerant Fuel Cladding Application." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-08900.

Full text

Abstract:

Abstract Compared to the standard UO2–Zirconium (Zr) based system, accident tolerant nuclear fuels need to tolerate loss of active cooling in the core for a considerably longer time while maintaining or improving the fuel performance during normal operation conditions. Advanced alloys such as iron-chromium-aluminum-molybdenum (FeCrAlMo) alloys are being investigated both under normal operation conditions in high temperature water (e.g. 288°C) and under accident conditions for reaction with super-heated steam up to 1500°C. After a loss of coolant (LOCA) accident the reactor needs to be flooded,

APA, Harvard, Vancouver, ISO, and other styles

5

Jha, S. K., and A. S. Khanna. "Effect of Quaternary Element Addition on the Oxidation Behaviour of Ti3Al-Nb Intermetallics." In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99270.

Full text

Abstract:

Abstract Alloys based on α2-Ti3Al intermetallics are promising materials for many high temperature applications due to their low density and high specific strength. However, low room temperature ductility and inadequate oxidation resistance are of concern for many applications. The addition of Nb is beneficial as it not only improves the room temperature ductility but also helps to improve the oxidation resistance to some extent. But in most cases oxidation resistance is not sufficient even for the alloys with high Nb content. The present work is concerned with the improvement in the oxidation

APA, Harvard, Vancouver, ISO, and other styles

6

He, Xihua, Yi-Ming Pan, Nathan Hall, Ricardo Torres, and James Hammelman. "Assessment of Potential Degradation Mechanisms for Fresh and Spent Nuclear Metal Fuel and TRISO Fuel During Transportation and Storage." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16425.

Full text

Abstract:

Abstract As the U.S. Nuclear Regulatory Commission (NRC) staff prepares for regulatory interactions and potential applications for non-light water reactor technologies, there is a need to develop an understanding of the potential challenges associated with regulating transportation and storage of advanced reactor fuel (ARF) types. Potential ARF types that may be subject to NRC regulation in the future include metal fuels (typically uranium alloys such as U-Pu, U-Zr, U-Mo, and U-Pu-Zr, often with sodium between the fuel and cladding) for compact fast reactors and solid coated particle fuels, co

APA, Harvard, Vancouver, ISO, and other styles

7

Qiao, Wenfeng, Wanqiang Liu, Jianguang Yuan, Limin Wang, Dongming Yin, and Yong Cheng. "Effects of zr substitution on TiMn-based AB₂-type hydrogen storage alloy." In Ninth International Conference on Energy System, Electricity and Power (ESEP 2024), edited by Mohan Lal Kolhe, Yunfei Mu, Ze Cheng, and Qian Xiao. SPIE, 2025. https://doi.org/10.1117/12.3060373.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ebert, W. L., V. K. Gattu, and J. E. Indacochea. "Electrochemical Methods to Quantify Alloy Waste Form Degradation." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11279.

Full text

Abstract:

Abstract We have conducted electrochemical experiments with several multi-phase alloy and alloy/ceramic composite materials representing waste forms that are being developed for metallic high-level radioactive waste streams generated during the pyroprocessing of spent nuclear fuel. The waste streams are dominated by contaminated steel cladding with Zr and small amounts of noble metal fission products from the fuel. The predominant alloy phases that form are FeCrMo-based intermetallics that host Tc and FeZrNi-based intermetallics that host actinide fuel wastes. An experimental protocol was deve

APA, Harvard, Vancouver, ISO, and other styles

9

Timmins, Peter. "Effect of Axiallity of Stress State on Hydrogen Cracking Kinetics in Metals - Troiano Revisited." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96598.

Full text

Abstract:

Abstract An experimental study based on the acoustic emission technique was carried out to examine how the axiallity of the stress state, as first postulated by Troiano, influenced the hydrogen cracking kinetics, in terms of delayed hydride cracking (DHC) propagation, using constant K specimens machined from Zr-2.5wt% Nb pressure tube alloy, of 2 mm, 4 mm and 8 mm thickness. By changing the stress state from plane strain to plane stress at a constant applied stress intensity of 15 MPa√m and a hydrogen level of 50 ppm, the DHC velocity was reduced, in keeping with Troiano’s hypothesis. An expla

APA, Harvard, Vancouver, ISO, and other styles

10

"Production and Study of the Structure of Novel Superelastic Ti-Zr-Based Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Zr-based alloys"

1

Janney, Dawn E., and Cynthia Papesch. Metallic Fuels Handbook, Part 1: Alloys Based on U-Zr, Pu-Zr, U-Pu, or U-Pu-Zr, Including Those with Minor Actinides (Np, Am, Cm), Rare-earth Elements (La, Ce, Pr, Nd, Gd), and Y; and Part 2: Elements and Alloys not Based on U-Zr, Pu-Zr, U-Pu, or U-Pu-Zr. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1504934.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yu, J., C. Jiang, and Y. Zhang. Calculations of hydrogen diffusivity in Zr-based alloys: Influence of alloying elements and effect of stress. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1376196.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Tome, Carlos, Wei Wen, and Laurent Capolungo. Mechanism-based modeling of solute strengthening: application to thermal creep in Zr alloy. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1373532.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Olson, L. N. Chemical durability and degradation mechanisms of HT9 based alloy waste forms with variable Zr content. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1225177.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Shi, Zhan. Microstructural characterization of a Zr-Ti-Ni-Mn-V-Cr based AB₂-type battery alloy. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/754785.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!