Gotowe bibliografie tematyczne / Combustion structures

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Combustion structures”

Autor: Grafiati
Data publikacji: 2 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Combustion structures”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Combustion structures"

1

Coats, C. M. "Coherent structures in combustion." Progress in Energy and Combustion Science 22, no. 5 (1996): 427–509. http://dx.doi.org/10.1016/s0360-1285(96)00011-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Li, H. P. "Banded structures in unstable combustion synthesis." Journal of Materials Research 10, no. 6 (1995): 1379–86. http://dx.doi.org/10.1557/jmr.1995.1379.

Pełny tekst źródła
Streszczenie:
Banded structures in combustion-synthesized products have been observed during unstable combustion synthesis. The formation of the banded structures is discussed in this article. It is noted that the band spacing was changed when several initial processing conditions were varied. Any change in the processing parameters that correspondingly caused more unstable combustion was observed to decrease the propagation velocity of the combustion front and increase the band spacing. The correlation of the band spacing and oscillatory frequency of the unstable oscillatory combustion with the propagation
Style APA, Harvard, Vancouver, ISO itp.
3

Kim, Jong-Chan, Won-Chul Jung, Ji-Seok Hong, and Hong-Gye Sung. "The Effects of Turbulent Burning Velocity Models in a Swirl-Stabilized Lean Premixed Combustor." International Journal of Turbo & Jet-Engines 35, no. 4 (2018): 365–72. http://dx.doi.org/10.1515/tjj-2016-0053.

Pełny tekst źródła
Streszczenie:
Abstract The effects of turbulent burning velocities in a turbulent premixed combustion simulation with a G-equation are investigated using the 3D LES technique. Two turbulent burning velocity models – Kobayashi model, which takes into account the burning velocity pressure effect, and the Pitsch model, which considers the flame regions on the premixed flame structure – are implemented. An LM6000 combustor is employed to validate the turbulent premixed combustion model. The results show that the flame structures in front of the injector have different shapes in each model because of the differe
Style APA, Harvard, Vancouver, ISO itp.
4

Marudhappan, Raja, Chandrasekhar Udayagiri, and Koni Hemachandra Reddy. "Combustion chamber design and reaction modeling for aero turbo-shaft engine." Aircraft Engineering and Aerospace Technology 91, no. 1 (2018): 94–111. http://dx.doi.org/10.1108/aeat-10-2017-0217.

Pełny tekst źródła
Streszczenie:
Purpose The purpose of this paper is to formulate a structured approach to design an annular diffusion flame combustion chamber for use in the development of a 1,400 kW range aero turbo shaft engine. The purpose is extended to perform numerical combustion modeling by solving transient Favre Averaged Navier Stokes equations using realizable two equation k-e turbulence model and Discrete Ordinate radiation model. The presumed shape β-Probability Density Function (β-PDF) is used for turbulence chemistry interaction. The experiments are conducted on the real engine to validate the combustion chamb
Style APA, Harvard, Vancouver, ISO itp.
5

Hendricks, R. C., D. T. Shouse, W. M. Roquemore, et al. "Experimental and Computational Study of Trapped Vortex Combustor Sector Rig with High-Speed Diffuser Flow." International Journal of Rotating Machinery 7, no. 6 (2001): 375–85. http://dx.doi.org/10.1155/s1023621x0100032x.

Pełny tekst źródła
Streszczenie:
The Trapped Vortex Combustor (TVC) potentially offers numerous operational advantages over current production gas turbine engine combustors. These include lower weight, lower pollutant emissions, effective flame stabilization, high combustion efficiency, excellent high altitude relight capability, and operation in the lean burn or RQL modes of combustion. The present work describes the operational principles of the TVC, and extends diffuser velocities toward choked flow and provides system performance data. Performance data include EINOx results for various fuel-air ratios and combustor reside
Style APA, Harvard, Vancouver, ISO itp.
6

Meng, Nan, and Feng Li. "Large-Eddy Simulations of Unsteady Reaction Flow Characteristics Using Four Geometrical Combustor Models." Aerospace 10, no. 2 (2023): 147. http://dx.doi.org/10.3390/aerospace10020147.

Pełny tekst źródła
Streszczenie:
Combustion instability constitutes the primary loss source of combustion chambers, gas turbines, and aero engines, and it affects combustion performance or results in a sudden local oscillation. Therefore, this study investigated the factors affecting flame fluctuation on unsteady combustion flow fields through large-eddy simulations. The effects of primary and secondary holes in a triple swirler staged combustor on flame propagation and pressure fluctuation in a combustion field were studied. Moreover, the energy oscillations and dominant frequencies in the combustion field were obtained usin
Style APA, Harvard, Vancouver, ISO itp.
7

Zhang, Qun, Peng Zhang, Shun-li Sun, et al. "Large eddy simulation study of flow field characteristics of a combustor with two coaxial swirlers." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 234, no. 5 (2019): 625–42. http://dx.doi.org/10.1177/0957650919870420.

Pełny tekst źródła
Streszczenie:
The cold and reaction flow fields of a combustor with two coaxial swirlers are investigated by means of large eddy simulation. Effective data processing methods such as proper orthogonal decomposition and fast Fourier transform are employed for analysis. The complex flow phenomena such as swirling jet, shear layer, recirculation zone, and precession vortex core are observed and their characteristics are analyzed. The dynamics of the flame and its interactions with the complex swirling flows and large-scale eddies are characterized. The precession vortex core structures and its influences on th
Style APA, Harvard, Vancouver, ISO itp.
8

Hwang, Donghyun, Cheolwoong Kang, and Kyubok Ahn. "Effect of Mixing Section Acoustics on Combustion Instability in a Swirl-Stabilized Combustor." Energies 15, no. 22 (2022): 8492. http://dx.doi.org/10.3390/en15228492.

Pełny tekst źródła
Streszczenie:
An experimental study was performed to investigate the characteristics of two different combustion instability modes in a swirl-stabilized combustor. The first is the eigenfrequency corresponding to the half-wave of the combustion chamber section, and the second is the quarter-wave eigenmode of the inlet mixing section. The purpose of this study is to understand the effects of the swirl number on each combustion instability mode and analyze their generalized characteristics. Premixed gases composed of hydrocarbon fuels (C2H4 and CH4) and air were burned by independently varying the experimenta
Style APA, Harvard, Vancouver, ISO itp.
9

Peters, B. "Cellular structures in solid fuel combustion." Flow, Turbulence and Combustion 73, no. 3-4 (2005): 217–29. http://dx.doi.org/10.1007/s10494-005-4031-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Arkhipov, V. A., V. N. Vilyunov, E. A. Kozlov, and Vl F. Trofimov. "Convective combustion of ordered porous structures." Combustion, Explosion, and Shock Waves 22, no. 4 (1987): 410–14. http://dx.doi.org/10.1007/bf00862882.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Combustion structures"

1

Atobiloye, R. Z. "Flow and combustion in vortical structures." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321332.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Muhieddine, Mohamad. "Simulation numérique des structures de combustion préhistoriques." Rennes 1, 2009. ftp://ftp.irisa.fr/techreports/theses/2009/muhieddine.pdf.

Pełny tekst źródła
Streszczenie:
La compréhension des comportements des hommes préhistoriques nécessite la mise au point de méthodologies appropriées étudiant la nature et le fonctionnement des structures de combustion préhistoriques. Ce travail présente alors des outils numériques pour résoudre le problème de diffusion de la chaleur dans un milieu poreux saturé d'eau et pour déterminer les propriétés physiques du milieu par problème inverse. La première partie est consacrée à la résolution de problèmes de changement de phase utilisant deux approches, LHA (accumulation de chaleur latente) et AHC (capacité apparente), cette de
Style APA, Harvard, Vancouver, ISO itp.
3

Gruenert, Thomas. "Analysis of crankshaft-crankcase interaction for the prediction of the dynamic structural response and noise radiation of IC-engine structures." Thesis, Loughborough University, 2000. https://dspace.lboro.ac.uk/2134/27786.

Pełny tekst źródła
Streszczenie:
This thesis presents research work which is concerned with the development of analytical and numerical methods for the dynamic analysis of the crankshaft-crankcase assembly. The effects of interaction of crankshaft and crankcase on the dynamic response of an IC engine block structure are studied. These methods are especially attractive for the simulation of the steady state response of rotating systems with many degrees of freedom which are forced by multiple periodic excitations. A major novelty of the methods is the ability to model the system non-linearities successfully as frequency depend
Style APA, Harvard, Vancouver, ISO itp.
4

Kaltner, Wolfgang. "Hollow sphere structures for the emission limitation of internal combustion engines." kostenfrei, 2008. http://mediatum2.ub.tum.de/doc/650302/650302.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Williams, Timothy C. "Combustion, NOx formation and mixing processes in Helmholtz pulse combustors." Thesis, Loughborough University, 2000. https://dspace.lboro.ac.uk/2134/18459.

Pełny tekst źródła
Streszczenie:
This thesis presents a laser diagnostic investigation into the combustion, NOx formation and mixing processes occurring within the optically assessed combustion chamber of a methane-fired (10kW), fully premixed, self-aspirating, Helmholtz pulse combustor. The inlet geometry of the combustion chamber consisted of a step expansion and a bluff body obstacle formed by a stagnation plate. The focus of the investigation was the effects of the stream-wise position of the stagnation plate on the pulse combustion processes. A comprehensive parametric study of the performance of the pulse combustor is p
Style APA, Harvard, Vancouver, ISO itp.
6

Albukaai, Diaa Eddin. "Les structures de combustion au Levant pendant la période Néolithique précéramique (10000-7000 BP) : typologie, techniques de construction, emplacements et fonctions." Thesis, Lyon 2, 2014. http://www.theses.fr/2014LYO20109.

Pełny tekst źródła
Streszczenie:
La maîtrise du feu est l’une des innovations majeures de l’histoire humaine et l'une des premières preuves de notre humanité. Le foyer est par excellence un lieu fédérateur. Son rôle social est évidemment essentiel au sein d’une population et a sans doute contribué au développement de la communication. Mais l’apport le plus important que procure le feu à l’être humain est la possibilité de cuire ses aliments, améliorant le menu quotidien de la famille préhistorique. Dans le cadre de cette recherche doctorale, les structures de combustion du Proche-Orient et plus précisément de la Syrie datant
Style APA, Harvard, Vancouver, ISO itp.
7

Kendrick, Donald William Zukoski E. E. "An experimental and numerical investigation into reacting vortex structures associated with unstable combustion /." Diss., Pasadena, Calif. : California Institute of Technology, 1995. http://resolver.caltech.edu/CaltechETD:etd-10122007-131523.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Jarvis, Simon. "Premixed flame propagation and interaction with turbulent flow structures in a semi-confined combustion chamber." Thesis, Loughborough University, 2003. https://dspace.lboro.ac.uk/2134/10890.

Pełny tekst źródła
Streszczenie:
Applications of premixed turbulent combustion are common in the modern environment. The diversity of the applications spans turbulent flame propagation in explosions to combustion in an internal combustion engine. The research effort in the former is directed towards the improvement of plant safety and the latter to the reduction of harmful emissions. In this thesis key examples of the use of turbulent combustion in practical situations highlight the need for increased understanding within this field of combustion. Thus, this thesis presents a detailed laser diagnostic investigation into three
Style APA, Harvard, Vancouver, ISO itp.
9

Reveillon, Julien. "Simulation dynamique des grandes structures appliquée aux flammes turbulentes non-prémélangées." Rouen, 1996. http://www.theses.fr/1996ROUES071.

Pełny tekst źródła
Streszczenie:
Ce travail de thèse a été consacré à la simulation des grandes structures appliquée aux flammes turbulentes non-prémélangées. Après une étude bibliographique générale, le choix d'un modèle de sous-maille dynamique dont les paramètres s'ajustent automatiquement aux contraintes locales de l'écoulement a été effectue. La méthode de détermination des coefficients dynamiques a fait l'objet d'une attention particulière une formulation statistique, introduisant l'approche fonction densité de probabilité de sous-maille (SGPDF) a été proposée pour la modélisation de la combustion. Dans un premier temps
Style APA, Harvard, Vancouver, ISO itp.
10

Kaufman, Kelsey Leigh. "Effect of hydrogen addition and burner diameter on the stability and structure of lean, premixed flames." Thesis, University of Iowa, 2014. https://ir.uiowa.edu/etd/4661.

Pełny tekst źródła
Streszczenie:
Low swirl burners (LSBs) have gained popularity in heating and gas power generation industries, in part due to their proven capacity for reducing the production of NOx, which in addition to reacting to form smog and acid rain, plays a central role in the formation of the tropospheric ozone layer. With lean operating conditions, LSBs are susceptible to combustion instability, which can result in flame extinction or equipment failure. Extensive work has been performed to understand the nature of LSB combustion, but scaling trends between laboratory- and industrial-sized burners have not been est
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Combustion structures"

1

Meinköhn, Dirk, ed. Dissipative Structures in Transport Processes and Combustion. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84230-6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Montserrat, Mataró i. Pladelasala, Villard Anne, and Société de recherches archéologiques de Chauvigny., eds. Les nécropoles protohistoriques et structures néolithiques: Enclos, fosses, structures de combustion. Société de recherches archéologiques, artistiques, historiques et scientifiques du Pays Chauvinois, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Toner, S. J. Entrainment, chemistry and structures of fire plumes. U.S. Dept. of Commerce, National Bureau of Standards, Center for Fire Research, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Meinköhn, Dirk. Dissipative Structures in Transport Processes and Combustion: Interdisciplinary Seminar, Bielefeld, July 17-21, 1989. Springer Berlin Heidelberg, 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Jacques-Pierre, Millotte, ed. Le feu domestique et ses structures au néolithique aux âges des métaux: Actes du colloque de Bourg-en-Bresse et Beaune, 7-8 octobre 2000. M. Mergoil, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

J, Maffeo Robert, Schwartz S, and United States. National Aeronautics and Space Administration., eds. Engine structures analysis software: Component specific modeling (COSMO). National Aeronautics and Space Administration, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

March, Ramiro Javier. "Méthodes physiques et chimiques appliquées à l'étude des structures de combustion préhistoriques": L'approche par la chimie organique". A.N.R.T. Université de Lille III, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

L, Berlad A., and United States. National Aeronautics and Space Administration., eds. The structure of particle cloud premixed flames. National Aeronautics and Space Administration, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Buckmaster, John David. Flames in dusty mixtures: Their structure and stability. National Aeronautics and Space Administration, Langley Research Center, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Merker, Günter P. Combustion Engines Development: Mixture Formation, Combustion, Emissions and Simulation. Springer-Verlag Berlin Heidelberg, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Combustion structures"

1

Haidn, Oskar J., Nikolaus A. Adams, Rolf Radespiel, et al. "Collaborative Research for Future Space Transportation Systems." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_1.

Pełny tekst źródła
Streszczenie:
Abstract This chapter book summarizes the major achievements of the five topical focus areas, Structural Cooling, Aft-Body Flows, Combustion Chamber, Thrust Nozzle, and Thrust-Chamber Assembly of the Collaborative Research Center (Sonderforschungsbereich) Transregio 40. Obviously, only sample highlights of each of the more than twenty individual projects can be given here and thus the interested reader is invited to read their reports which again are only a summary of the entire achievements and much more information can be found in the referenced publications. The structural cooling focus are
Style APA, Harvard, Vancouver, ISO itp.
2

Chollet, J. P. "Turbulent Eddy Structures, Combustion and Chemical Reactions." In Vortex Flows and Related Numerical Methods. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-015-8137-0_24.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Proctor, D., I. G. Pearson, and M. McLeod. "Co-Visualization of Flame Structures and Species." In Combustion Technologies for a Clean Environment. CRC Press, 2022. http://dx.doi.org/10.1201/9780367810597-24.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Armbruster, Wolfgang, Justin S. Hardi, and Michael Oschwald. "Experimental Investigation of Injection-Coupled High-Frequency Combustion Instabilities." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_16.

Pełny tekst źródła
Streszczenie:
Abstract Self-excited high-frequency combustion instabilities were investigated in a 42-injector cryogenic rocket combustor under representative conditions. In previous research it was found that the instabilities are connected to acoustic resonance of the shear-coaxial injectors. In order to gain a better understanding of the flame dynamics during instabilities, an optical access window was realised in the research combustor. This allowed 2D visualisation of supercritical flame response to acoustics under conditions similar to those found in European launcher engines. Through the window, high
Style APA, Harvard, Vancouver, ISO itp.
5

Ida, Tamio, and Kazutomo Ohtake. "An Experimental Study of Spatial Study and Time Resolved Structures of Turbulent Diffusion Flame." In Transport Phenomena In Combustion. Routledge, 2024. https://doi.org/10.1201/9780203735138-52.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Dold, J. W., L. J. Hartley, and D. Green. "Dynamics of Laminar Triple-Flamelet Structures in Non-Premixed Turbulent Combustion." In Dynamical Issues in Combustion Theory. Springer New York, 1991. http://dx.doi.org/10.1007/978-1-4612-0947-8_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Grossmann, S. "Turbulence and Navier-Stokes Equations." In Dissipative Structures in Transport Processes and Combustion. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84230-6_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Bestehorn, M., and H. Haken. "Synergetics Applied to Pattern Formation in Large-Aspect-Ratio Systems." In Dissipative Structures in Transport Processes and Combustion. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84230-6_10.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Klimontovich, Yu I. "Kinetic Description of Autowave Processes and Hydrodynamic Motion." In Dissipative Structures in Transport Processes and Combustion. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84230-6_11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Gray, P., and S. R. Kay. "The Non-isothermal Autocatalator: Complex Oscillations and Chaos." In Dissipative Structures in Transport Processes and Combustion. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84230-6_12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Combustion structures"

1

Husarova, Iryna, Volodymyr Nadtoka, Maksym Kraiev, et al. "Vacuum Arc Coatings from Heat-Resistant Alloys for Combustion Chambers of Liquid-Propellant Rocket Engines." In IAF Materials and Structures Symposium, Held at the 75th International Astronautical Congress (IAC 2024). International Astronautical Federation (IAF), 2024. https://doi.org/10.52202/078369-0113.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

JOHNSTON, L., L. PERKINS, C. DENNISTON, and J. PRICE. "ADVANCED MAIN COMBUSTION CHAMBER STRUCTURAL JACKET STRENGTH ANALYSIS." In 34th Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics, 1993. http://dx.doi.org/10.2514/6.1993-1395.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Vlcek, J., H. Huber, J. Kretschmer, T. Schenkel, and H. Voggenreiter. "Spray Forming Composite Combustion Chamber Structures." In ITSC 1999, edited by E. Lugscheider and P. A. Kammer. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 1999. http://dx.doi.org/10.31399/asm.cp.itsc1999p0015.

Pełny tekst źródła
Streszczenie:
Abstract Atmospheric Rheo-Spraying (ARS) using the HVOF process enables injection-molded structures and thick-film coatings from steels and from high-temperature Ni-based alloys with layer thicknesses down to the centimeter. The ARS process control is based on the thermal spraying of particles in the solid state at a maximum average speed of more than 600 m/s. The coating consolidation to porosity values below 1% occurs through the particle impact with high kinetic energy. Because of the low particle oxidation, the mechanical properties of the heat-treated injection-molded structures are compa
Style APA, Harvard, Vancouver, ISO itp.
4

ALLIOT, P., A. HUCK, and P. EDLINGER. "Low cycle fatigue analysis of the combustion chamber of the Vulcain engine gas generator." In 31st Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1045.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Russell, Carolyn, Robert Carter, David Ellis, and Richard Goudy. "Friction Stir Welding of GR-Cop 84 for Combustion Chamber Liners." In 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference. American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-1995.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Noonan, Erin, and Mark Spearing. "Structural Design and Test of a Micro-Rocket Combustion Chamber." In 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
14th AIAA/ASME/AHS Adaptive Structures Conference
7th. American Institute of Aeronautics and Astronautics, 2006. http://dx.doi.org/10.2514/6.2006-1671.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Li, Guoqiang, and Ephraim J. Gutmark. "Effects of Swirler Configurations on Flow Structures and Combustion Characteristics." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-53674.

Pełny tekst źródła
Streszczenie:
Modern gas turbine combustion technologies are driven by stringent regulations on pollutant emissions such as CO and NOx. A combustion system of multiple swirlers coupled with distributed fuel injection was studied as a new concept for reducing NOx emissions by application of Lean Direct Injection (LDI) combustion. The present paper investigates the effects of swirler configurations on the flow structures in isothermal flow and combustion cases using a multiple-swirlers fuel injector at atmospheric conditions. The swirling flow field within the combustor was characterized by a central recircul
Style APA, Harvard, Vancouver, ISO itp.
8

Shaw, Greg S., Joseph T. Snyder, Troy S. Prince, and Michael C. Willett. "A high-temperature shape memory alloy sensor for combustion monitoring and control." In Smart Structures and Materials, edited by Edward V. White. SPIE, 2005. http://dx.doi.org/10.1117/12.598051.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Paschereit, Christian, Wolfgang Weisenstein, and Ephraim Gutmark. "Role of coherent structures in acoustic combustion control." In 29th AIAA, Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics, 1998. http://dx.doi.org/10.2514/6.1998-2433.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Tairova, A. A., G. V. Belyakov, and S. Yu Chervinchuk. "Ablation in the slit in combustion." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2017 (AMHS’17). Author(s), 2017. http://dx.doi.org/10.1063/1.5013897.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Combustion structures"

1

Aggarwal, Suresh K. Spray Vaporization and Combustion in Large Vortical Structures. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada335808.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

McKinnon, Mark, Craig Weinschenk, and Daniel Madrzykowski. Modeling Gas Burner Fires in Ranch and Colonial Style Structures. UL Firefighter Safety Research Institute, 2020. http://dx.doi.org/10.54206/102376/mwje4818.

Pełny tekst źródła
Streszczenie:
The test scenarios ranged from fires in the structures with no exterior ventilation to room fires with flow paths that connected the fires with remote intake and exhaust vents. In the ranch, two replicate fires were conducted for each room of origin and each ventilation condition. Rooms of fire origin included the living room, bedroom, and kitchen. In the colonial, the focus was on varying the flow paths to examine the change in fire behavior and the resulting damage. No replicates were conducted in the colonial. After each fire scene was documented, the interior finish and furnishings were re
Style APA, Harvard, Vancouver, ISO itp.
3

Gollahalli, S. R., and N. Butuk. Combustion of pulverized coal in vortex structures. Final report, October 1, 1993--December 31, 1995. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/257349.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Gollahalli, S. R. Combustion of pulverized coal in vortex structures. Quarterly progress report No. 7, April 1, 1995--June 30, 1995. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/137339.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Gollahalli, S. R. Combustion of pulverized coal in vortex structures. Quarterly progress report No. 1, October 1, 1993--December 31, 1993. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10148106.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Gollahalli, S. R. Combustion of pulverized coal in vortex structures. Quarterly progress report No. 2, January 1, 1994--March 31, 1994. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10153786.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Gollahalli, S. R. Combustion of pulverized coal in vortex structures. Quarterly progress report No. 8, July 1, 1995--September 30, 1995. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/206975.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Price, Matthew A. Effects of Cylindrical Charge Geometry and Secondary Combustion Reactions on the Internal Blast Loading of Reinforced Concrete Structures. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/841586.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Gollahalli, S. R. Combustion of pulverized coal in vortex structures. Quarterly progress report No. 6, January 1, 1995--March 31, 1995. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/93619.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Gollahalli, S. R. Combustion of pulverized coal in vortex structures. Quarterly progress report No. 3, April 1, 1994--June 30, 1994. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10176380.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Combustion structures” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii