Готові списки джерел за темами / Electrical efficiency of equipment

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Electrical efficiency of equipment"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Electrical efficiency of equipment".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Electrical efficiency of equipment"

Chalawadi, Vishwanath, and Sanjeeth P. Amminabhavi. "Matlab Simulation for Power Factor Correction." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 2788–92. http://dx.doi.org/10.22214/ijraset.2022.41905.

Повний текст джерела

Анотація:

Abstract: Lower in Power Factor of electrical equipments will draws high current from supply power. The effect of this is affected by impedance of electrical equipment. Therefore, the main consideration of this study is how impedance of electrical equipment affects the power factor of electrical loads, and then distributed power as the whole. This study is important to verify the right action to increase low power factor effectively for electrical energy efficiency concern.

Стилі APA, Harvard, Vancouver, ISO та ін.

Shevchuk, M. Ya, I. V. Hlad, Ya V. Batsala, and O. I. Kiianiuk. "IMPROVING EFFICIENCY OF ELECTRICAL EQUIPMENT FOR ROAD TRANSPORT." METHODS AND DEVICES OF QUALITY CONTROL, no. 2(43) (December 24, 2019): 59–67. http://dx.doi.org/10.31471/1993-9981-2019-2(43)-59-67.

Повний текст джерела

Анотація:

This paper presents the reasons for the increased level of automobile accumulators are given, the design of the start-charging device of increased reliability is considered. The most damaged nodes of the system of electrical equipment of motor vehicles are listed, the differentiation of elements from the standpoint of their structural reliability is shown, ways of increasing the reliability of the elements of the electrical equipment system are determined. It is shown that the main reasons for finding optimal modes of operation of vehicles electrical equipment are the economic factor, the impa

Стилі APA, Harvard, Vancouver, ISO та ін.

Konovalov, Yuriy, Anton Vaygachev, Maksim Velichko, and Roman Istratov. "ELECTRICAL SUPPLY AND ELECTRICAL EQUIPMENT OF MODERN DRILLING RIG." Scientific Papers Collection of the Angarsk State Technical University 2020, no. 1 (2020): 211–19. http://dx.doi.org/10.36629/2686-7788-2020-1-211-219.

Повний текст джерела

Анотація:

From the point of view of improving energy efficiency, new functions of modern drilling rigs are considered, which include the introduction of supervisory control, collection, processing, display and archiving of information, equipping microprocessor relay protection devices for highvoltage transformers, complete transistor devices for controlling electric drives, and a system for monitoring drilling process parameters.

Стилі APA, Harvard, Vancouver, ISO та ін.

Isakov, A. J., and Z. S. Abdullaev. "Study on increase of operation efficiency of electrical energy and electrical equipment." IOP Conference Series: Earth and Environmental Science 614 (December 18, 2020): 012047. http://dx.doi.org/10.1088/1755-1315/614/1/012047.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kinev, E. S., A. A. Tyapin, V. I. Panteleev, M. V. Pervukhin, and A. I. Bezrukikh. "Technological equipment for foundry production, efficiency and safety." Journal of Physics: Conference Series 2388, no. 1 (2022): 012069. http://dx.doi.org/10.1088/1742-6596/2388/1/012069.

Повний текст джерела

Анотація:

Abstract The article discusses the results of the development and research of controlled electrical preheating of casting troughs and intermediate tanks in the system of transport trays for pouring aluminum melt. Electric heating contributes to high-quality and safe pouring of the melt in the cold shop. The heating of the casting track links eliminates the possibility of an explosion when the melt contacts water or ice, and also maintains the fluidity of the metal and limits the temperature gradient in the melt. Evaluation of the efficiency of the heater system was carried out on the basis of

Стилі APA, Harvard, Vancouver, ISO та ін.

Stochitoiu, Maria Daniela, and Ilie Utu. "Aspects of energy efficiency in modern electrical installations." MATEC Web of Conferences 354 (2022): 00073. http://dx.doi.org/10.1051/matecconf/202235400073.

Повний текст джерела

Анотація:

This paper emphasises that the implementation of energy efficiency concepts needs to take in consideration multiple aspects of applications, as it must preserve the level of functionality, safety and performance of the equipment and installations.

Стилі APA, Harvard, Vancouver, ISO та ін.

Juntao, Wang, and Nozomu Mishima. "Development of Resource Efficiency Index for Electrical and Electronic Equipment." Procedia CIRP 61 (2017): 275–80. http://dx.doi.org/10.1016/j.procir.2016.11.172.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sereda, Oleksandr, Olena Sereda, and Nataliya Kruykova. "Investigations of the variable magnetic moment automatic compensation efficiency improving possibility of three-phase electrical equipment currents." Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency, no. 1 (6) (July 9, 2023): 83–89. http://dx.doi.org/10.20998/2224-0349.2023.01.15.

Повний текст джерела

Анотація:

An analysis and review of known parametric systems for automatic compensation of electrical equipment the external magnetic field was carried out. It was found that the known parametric electrical equipment automatic compensation systems of the external magnetic field do not take into account the change in the order of alternating power phases when the level of the external magnetic field changes, which reduces the effectiveness of the three-phase electrical equipment magnetic field compensation by two to three times. The parametric system of three-phase electrical equipment sinusoidal current

Стилі APA, Harvard, Vancouver, ISO та ін.

Pu, Hong Ke, and Qing Chao Wei. "Model Reuse Technology in Building Electrical Parameters Design." Applied Mechanics and Materials 580-583 (July 2014): 3179–82. http://dx.doi.org/10.4028/www.scientific.net/amm.580-583.3179.

Повний текст джерела

Анотація:

Electrical design in a variety of electrical equipment needs to search, copy and modify constantly, so it is inefficient. Parametric design technology is the most common way to achieve rapid design, but less in the electrical design of the specific application. With the electrical equipment model parameterization and the reuse technology model, develop electrical equipment design software based on CAD secondary development. Use of software, design by three levels of reuse technology on the equipment for quick drawing, editing, statistics, to avoid duplication of work more efficiently, to impro

Стилі APA, Harvard, Vancouver, ISO та ін.

Mihail, Savaniu Ioan, Tonciu Oana, Culcea Magdalena, Popovici Ioana Aristia, Zarnoeanu Valentin, and Maleș Daniela. "Energy Efficiency Aspects Regarding Passengers’ Transportation using Escalators." Romanian Journal of Transport Infrastructure 12, no. 2 (2023): 1–14. http://dx.doi.org/10.2478/rjti-2023-0018.

Повний текст джерела

Анотація:

Abstract Escalators are an important piece of equipment used for vertical transportation of people in buildings. In today’s context, when the reduction of greenhouse gas emissions is a global challenge, the energetic efficiency of escalators in operation becomes a priority. The research aims to identify possibilities to reduce the energy consumption of this category of equipment. In this respect, we have undertaken a series of tests to establish a correlation between passenger traffic and electrical energy consumption. The tests were carried out for an existing escalator and represent the firs

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Electrical efficiency of equipment"

Stulpinas, Saulius. "Aukštrakių nuotekų valymo įrenginių elektros vartojimo efektyvumo tyrimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070816_164208-32929.

Повний текст джерела

Анотація:

Energetikos inžinerijos magistro darbo tema yra aktuali kraštui integruojantis į vakarus ir tokios pastangos atitinka Europos Sąjungos (ES) direktyvų reikalavimus didinti energetikos efektyvumą jos vartojimo sferoje, Lietuvos energijos taupymo įstatymą, miesto savivaldybės nuostatas taupyti lėšas ir kiek įmanoma mažiau didinti nuotekų šalinimo paslaugos kainą. Elektros energijos vartojimo efektyvumo tyrimo tikslas – nustatyti energijos taupymo galimybes nuotekų valymo įrenginiuose. Darbe apžvelgiamas visas nuotekų valymo technologinis procesas. Atlikta elektros energijos vartojimo analizė. Išm

Стилі APA, Harvard, Vancouver, ISO та ін.

Гнатюк, Олександр Русланович, та Oleksandr Hnatiuk. "Розробка заходів підвищення ефективності системи електропостачання ТП 110/10 кВ". Master's thesis, ТНТУ імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29952.

Повний текст джерела

Анотація:

У дипломній роботі проведено модернізацію трансформаторної підстанції 110/10 кВ «Орданівка» для забезпечення надійності й ефективності постачання електроенергії з мінімальними втратами. Досліджено, що підвищення інтелектуальної складової в обладнанні трансформаторних підстанцій зробило можливим їх виконання цифровими щодо керуючих сигналів, необслуговуючими та самодіагностуючими з високим ступенем надійності. Досліджено, що широкі можливості сучасних засобів АСКОЕ дозволяють успішно вирішувати задачі визначення, аналізу і зменшення втрат електроенергії в електричних мережах, що підвищує надійн

Стилі APA, Harvard, Vancouver, ISO та ін.

Петренко, Любомир Васильович, та Lubomуr Petrenko. "Підвищення ефективності функціонування електричних мереж 110/10 кВ". Master's thesis, ТНТУ імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29659.

Повний текст джерела

Анотація:

У дипломній роботі проведено модернізацію трансформаторної підстанції 35/10 кВ з використанням сучасного комутуючого обладнання для забезпечення надійності й ефективності постачання електроенергії споживачам. Досліджені моделі зменшення втрат потужності, втрат напруги та отримання економічного ефекту в електромережах 110/10 кВ при їх реконструкції на напругу 110/20 кВ. Встановлено, що реконструкція електромереж на напругу 20 кВ з використанням інноваційних технологій дозволить збільшити їх пропускну здатність в 2-2,5 рази в порівнянні з мережами 6-10 кВ в межах тієї ж території, а використання

Стилі APA, Harvard, Vancouver, ISO та ін.

Івченко, О. В. "Система автоматизованого розрахунку прогнозованих обсягів енерговитрат при проектуванні технологічного процесу обробки деталей". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/82137.

Повний текст джерела

Анотація:

Кваліфікаційна робота магістра становить 97 сторінок, в тому числі 29 рисунків, сім таблиць, бібліографії з 30 джерел на трьох сторінках, одного додатку на восьми аркушах. Виходячи з актуальності й ступеня наукової розробки проблеми, метою дослідження є підвищення енергетичної ефективності технологічних процесів механічної обробки металів шляхом впровадження системи автоматизованого розрахунку прогнозованих обсягів енерговитрат при його проектуванні на основі розроблення універсального методу обчислення значень питомого показника споживання енергії під час проектування операцій механічної обр

Стилі APA, Harvard, Vancouver, ISO та ін.

Frimodig, Love. "Energy efficiency in rotating equipment." Thesis, KTH, Marina system, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-101905.

Повний текст джерела

Анотація:

This paper reports the findings of the first stage of a study on how the efficiency of a centrifugal pump depends on the eccentricity of the impeller (rotor). The geometry of the pump is based on the ERCOFTAC centrifugal pump that has been used to validate computational fluid dynamics software with laboratory measurements. The pump is modelled using the CFD-code Comsol multi physics (tm) in order to get the pressure and velocity field. From the pressure and velocity field the efficiency and output power for the pump is calculated. The energy efficiency of the same pump with different static ec

Стилі APA, Harvard, Vancouver, ISO та ін.

Marangopoulos, Ioannis P. "Ultrasonic cleaning baths : field measurements and cleaning efficiency." Thesis, University of Aberdeen, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.342194.

Повний текст джерела

Анотація:

Ultrasonic cleaning baths are routinely used for cleaning dental and surgical instruments. The importance of efficient cleaning prior to sterilisation is great. Micro-organisms can survive the sterilisation process as debris can act as an insulator. The information available on ultrasonic field distributions in cleaning baths is limited. A thermal technique, employing a thermistor probe coated with an absorbing material measures the temperature rise when the field is switched on compared to no sound temperature. Contour plots of the field of the cleaning bath resulted from point-to-temperature

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhu, Q. S. "Precision electrical impedance tomography instrumentation." Thesis, Oxford Brookes University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.332494.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Fenlon, Teresa Jayne. "Medical applications of electrical impedance measurements." Thesis, University of Surrey, 1992. http://epubs.surrey.ac.uk/773022/.

Повний текст джерела

Анотація:

The utilisation of electrical impedance measurements within the medical profession has broadened greatly since the advent of blood flow analysis in the 1950s. This thesis considers some of the important electrical impedance measurements currently used at a research stage in medicine, with specific emphasis on three major application. These are: the analysis of human body composition, particularly the quantification of body fat, the analysis of gastric motility using electrical impedance epigastrography and electrical impedance tomographic imaging of the abdomen in order to monitor gastric moti

Стилі APA, Harvard, Vancouver, ISO та ін.

Stanovskyi, Yevhen. "Energy efficient transport and equipment." Thesis, Дніпропетровський національний університет залізничного транспорту ім. академіка В. Лазаряна, 2017. https://er.knutd.edu.ua/handle/123456789/9142.

Повний текст джерела

Анотація:

The purpose of the article is to emphasise the importance of energy efficient transport and equipment as the world practice demonstrates that increase in energy efficiency is the most effective direction of ensuring energy security of the country.<br>Автори статті приділяють увагу питанню важливості використання енергоощадного транспорту та обладнання, так як світовий досвід демонструє, що посилення заходів з енергозбереження є найбільш ефективним способом гарантування енергобезпеки країни.<br>Авторы статьи уделяют внимание важности проблеме использования энергосберегающего транспорта и оборуд

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Tao. "Analysis of mixing efficiency in continuous polymer processing equipment." Case Western Reserve University School of Graduate Studies / OhioLINK, 1995. http://rave.ohiolink.edu/etdc/view?acc_num=case1062698612.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Electrical efficiency of equipment"

Zuev, Sergey, Ruslan Maleev, and Aleksandr Chernov. Energy efficiency of electrical equipment systems of autonomous objects. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1740252.

Повний текст джерела

Анотація:

When considering the main trends in the development of modern autonomous objects (aircraft, combat vehicles, motor vehicles, floating vehicles, agricultural machines, etc.) in recent decades, two key areas can be identified. The first direction is associated with the improvement of traditional designs of autonomous objects (AO) with an internal combustion engine (ICE) or a gas turbine engine (GTD). The second direction is connected with the creation of new types of joint-stock companies, namely electric joint-stock companies( EAO), joint-stock companies with combined power plants (AOKEU).&#x0D

Стилі APA, Harvard, Vancouver, ISO та ін.

Thumann, Albert. Introduction to efficient electrical systems design. 2nd ed. Fairmont Press, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ayraud, Stephen. Introduction to efficient electrical systems design. Fairmont Press, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ayraud, Stephen. Introduction to efficient electrical systems design. Fairmont Press, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Frost & Sullivan., ed. European professional lighting equipment markets: Trend toward greater versatility, efficiency, and control. Frost & Sullivan, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wiel, Stephen. Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting. CLASP, 2001.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Geller, Howard S. Consensus national efficiency standards for lamps, motors, showerheads, and commercial hvac equipment. American Council for an Energy-Efficient Economy, 1992.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kubo, Toru. Opportunities for new appliance and equipment efficiency standards: Energy and economic savings beyond current standards programs. American Council for an Energy-Efficient Economy, 2001.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Alliance, Northwest Energy Efficiency, ed. Residential lighting program final market evaluation progress report: A report to the Northwest Energy Efficiency Alliance. Northwest Energy Efficiency Alliance, 2004.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sumper, Andreas, and Angelo Baggini, eds. Electrical Energy Efficiency. John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119990048.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Electrical efficiency of equipment"

Kitajima, Tomoaki, Yuji Sasaki, and Nozomu Mishima. "Evaluation of Resource Efficiency of Electrical and Electronic Equipment." In Sustainability Through Innovation in Product Life Cycle Design. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0471-1_64.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ye, Weijia, Rubiao Han, Peng Gao, and Ning He. "Research on Airport Communication and Navigation Equipment Inspection Assistance System Based on AR Technology." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-2409-6_6.

Повний текст джерела

Анотація:

Abstract Aviation transportation is an important component of our country’s transportation system. With the rapid improvement of the national economy, the civil aviation industry in our country has experienced rapid development, and the number and scale of airports are also constantly increasing. Communication and navigation systems play an important role in the transportation of aircraft and the scale operation of airports. Efficient and accurate communication and navigation system can not only effectively ensure air transportation safety but also improve overall operational efficiency, makin

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Chenyu. "Fault Diagnosis and Simulation Testing of Electrical Equipment Based on Machine Learning Algorithms." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-7887-4_110.

Повний текст джерела

Анотація:

Abstract Electrical equipment and the stable operation of the power system have a close connection; qualified electrical equipment can ensure the normal operation of the power system. The electrical fault factors are numerous, and it is necessary to carry out early discovery and early resolution of electrical faults. Based on this, this paper analyzes an electrical equipment fault diagnosis system using machine learning algorithms, and at the same time conducts simulation experiments on the performance of the system, and its results show that the diagnosis system proposed in this paper can sho

Стилі APA, Harvard, Vancouver, ISO та ін.

Yao, Fulai, and Yaming Yao. "Other Commonly Used Energy-Saving Operation Methods." In Efficient Energy-Saving Control and Optimization for Multi-Unit Systems. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4492-3_24.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zheng, Yadi, Anan Zhang, Chengqian Zhang, and Luyang Gou. "Energy Efficiency Model of the PIES Taking into Account the Time-Varying Characteristics of Equipment Operating Conditions." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3927-3_56.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jie, Duan, Liu Yong, and Wang Yanhong. "Study on the Evaluation of Technological Innovation Efficiency of Equipment Manufacturing Industry in China Based on Improved DEA." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28798-5_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ioshchikhes, Borys, Daniel Piendl, Henrik Schmitz, Jasper Heiland, and Matthias Weigold. "Development of a Holistic Framework for Identifying Energy Efficiency Potentials of Production Machines." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28839-5_48.

Повний текст джерела

Анотація:

AbstractA prerequisite to identify energy efficiency potentials and to improve energy efficiency is the measurement and analysis of the energy demand. However, in industrial practice, approaches to identify energy efficiency measures of production machines are associated with high costs for metering equipment and time consuming analysis requiring expertise. Against this background, this paper describes a comprehensive and cost-efficient framework from acquisition to analysis of energy data to serve as a starting point to increase energy efficiency in manufacturing. For this purpose, an energy

Стилі APA, Harvard, Vancouver, ISO та ін.

Yao, Fulai, and Yaming Yao. "Speed Regulation Method in Energy Saving System." In Efficient Energy-Saving Control and Optimization for Multi-Unit Systems. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4492-3_7.

Повний текст джерела

Анотація:

AbstractIn the energy-saving control system, in many occasions, it is necessary to use the method of speed regulation to distribute the load of the equipment and to start and stop the equipment. These speed regulation methods are both mechanical and electrical. Due to the rapid development of high-voltage and high-current electronic devices, the application of frequency converter speed regulation of AC motors is becoming more and more common.

Стилі APA, Harvard, Vancouver, ISO та ін.

Balducci, Anthony. "United States Department of Energy: National Energy Efficiency Program for Consumer Products and Commercial Equipment." In Energy Efficiency Improvements in Electric Motors and Drives. Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60832-2_26.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ajmera, Sudhakar, Pulkit Singh, Chinthakindi Babaiah, D. Aravind Reddy, and L. Bhanu Sanyasi Rao. "Improving coal mining efficiency and safety by monitoring equipment in real-time using a nano 33 BLE sense lite." In Integrated Technologies in Electrical, Electronics and Biotechnology Engineering. CRC Press, 2025. https://doi.org/10.1201/9781003606208-64.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Electrical efficiency of equipment"

Radu, Dan Gabriel, and Valentin Năvrăpescu. "Optimizing Energy Efficiency and Monitoring Methods for Power Transformers." In 2025 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2025 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2025. https://doi.org/10.1109/optim-acemp62776.2025.11075283.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Luchian, Mihai, Codruta-Mihaela Ancuti, Lucian Tutelea, and Ioan Serban. "Effect of Hydrogen Ionization on Fuel Cell Performance: Efficiency and Fuel Consumption." In 2025 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2025 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2025. https://doi.org/10.1109/optim-acemp62776.2025.11075286.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lyublinski, Efim Ya, and Donald A. Kubik. "Combined Corrosion Protection Methods Including Inhibitors." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04403.

Повний текст джерела

Анотація:

Abstract The combined corrosion protection methods described in this review make the efficient long-term corrosion protection of valuable equipment and structures possible. Existing corrosion protection methods using volatile (VCI) or soluble (SCI) corrosion inhibitors, coatings, or cathodic protection systems (CPS) are generally efficient and have a useful service life. This paper describes the efficiency and the application experience of: VCI compositions in combination with desiccants and gases, and SCI in combination with CPS. These methods are used to increase the efficiency and service l

Стилі APA, Harvard, Vancouver, ISO та ін.

Biba, Diana-Raluca, Sorin Musuroi, Marcus Svoboda, and Octavian-Gabriel Petreanu. "Efficiency Evaluation of an Automotive 800V HV/LV DCDC Converter Comparing IGBTs and SiC MOSFETs Semiconductors." In 2025 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2025 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2025. https://doi.org/10.1109/optim-acemp62776.2025.11075243.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Martin, Adrian-Daniel, Babak Fahimi, Lucian-Nicolae Tutelea, and Ion Boldea. "Rotor Current Oriented Control with Efficiency Investigation of a Standalone DFIG with Diode-Reactified DC Output." In 2025 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2025 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2025. https://doi.org/10.1109/optim-acemp62776.2025.11075263.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Jungang, Fusheng Zhou, Yao Zheng, et al. "Validating Equivalence of Compression Cylinder Structures to Enhance Reliability and Efficiency in High-Capacity Circuit Breaker Designs." In 2024 7th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2024. https://doi.org/10.1109/icepe-st61894.2024.10792617.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tastenov, Amangeldy D., Marina A. Chuprina, Asemgul A. Bektassova, and Aigerim B. Sagandyk. "Efficiency of electrical equipment of metallurgical production." In THERMOPHYSICAL BASIS OF ENERGY TECHNOLOGIES (TBET 2020). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0046734.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Oehme, Ines, Kristine Sperlich, Regina Kohlmeyer, Siddharth Prakash, Knut Sander, and Christian Clemm. "Strengthening material efficiency of electrical and electronic equipment." In Electronics Goes Green 2016+ (EGG). IEEE, 2016. http://dx.doi.org/10.1109/egg.2016.7829823.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Haikova, Tetiana, Serhii Chernenko, Eduard Klimov, Andrii Chernysh, and Mykhailo Burlyga. "Increasing the Energy Efficiency of Sheet Bending Equipment." In 2022 IEEE 4th International Conference on Modern Electrical and Energy System (MEES). IEEE, 2022. http://dx.doi.org/10.1109/mees58014.2022.10005731.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Valentini, Massimo, Alin Raducu, Dezso Sera, and Remus Teodorescu. "PV inverter test setup for European efficiency, static and dynamic MPPT efficiency evaluation." In 2008 11th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2008. http://dx.doi.org/10.1109/optim.2008.4602445.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Electrical efficiency of equipment"

Dickau, Ralph, and Bill Lockley. PR-586-20205-Z01 Pump Station Efficiency Improvement Evaluation. Pipeline Research Council International, Inc. (PRCI), 2021. http://dx.doi.org/10.55274/r0012098.

Повний текст джерела

Анотація:

Pump station efficiency improvement is more complicated and specialized than simply following the latest industry trends. Liquids pipelines are different in many ways from comparable pumping environments. The pumps and electrical equipment are larger than in typical utilities, the stations on a pipeline are spaced out geographically over large parts of the country making maintenance and control more challenging. Much of what is researched and written is not applicable to the scale of liquid hydrocarbon pipelines, therefore, this report is unique in its examination of the factors that affect pu

Стилі APA, Harvard, Vancouver, ISO та ін.

Goetzler, William, Timothy Sutherland, and Callie Reis. Energy Savings Potential and Opportunities for High-Efficiency Electric Motors in Residential and Commercial Equipment. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1220812.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Haddad, J., L. A. Horta Nogueira, Germano Lambert-Torres, and L. E. Borges da Silva. Energy Efficiency and Smart Grids for Low Carbon and Green Growth in Brazil: Knowledge Sharing Forum on Development Experiences: Comparative Experiences of Korea and Latin America and the Caribbean. Inter-American Development Bank, 2015. http://dx.doi.org/10.18235/0007001.

Повний текст джерела

Анотація:

The Brazilian continental dimensions and diversified natural resources are proportional to the challenges to develop its infrastructure sustainably and supply proper public services to more than 200 million inhabitants. Energy consumption has doubled since 1990, fostered by economic growth and the expansion of middle class. In this context, promote energy efficiency, in a broad sense, is urgent and rational. Brazil has a relatively long history in promoting energy efficiency at final user level. A landmark of this process is the Brazilian Labeling Program, launched in 1984, as direct consequen

Стилі APA, Harvard, Vancouver, ISO та ін.

Chaparro, Rodrigo, Maria Netto, Patricio Mansilla, and Daniel Magallon. Energy Savings Insurance: Advances and Opportunities for Funding Small- and Medium-Sized Energy Efficiency and Distributed Generation Projects in Chile. Inter-American Development Bank, 2020. http://dx.doi.org/10.18235/0002947.

Повний текст джерела

Анотація:

The Energy Savings Insurance Program seeks to promote investment in energy efficiency and distributed generation in Latin America, primarily through small- and medium-sized enterprises (SMEs). It focuses on developing an innovative scheme of guaranteed energy performance that mitigates project risk and generates investor confidence (ESI Model). The Inter-American Development Bank (IDB) facilitates the development of the ESI Program in alliance with the National Development Banks (NDBs). The ESI Model includes a contract for the supply, installation, and maintenance of equipment for generating

Стилі APA, Harvard, Vancouver, ISO та ін.

Trenbath, Kim, Omkar Ghatpande, and Amy LeBar. Medical Imaging Equipment Energy Efficiency. Office of Scientific and Technical Information (OSTI), 2023. http://dx.doi.org/10.2172/1968453.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

TANAKA, TINA J., EDWARD E. BAYNES JR., STEVEN P. NOWLEN, JOHN E. BROCKMANN, LOUIS A. GRITZO, and CHRISTOPHER R. SHADDIX. LDRD report: Smoke effects on electrical equipment. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/752612.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yancey, Neal. Performance and Efficiency of Biomass Densification Equipment. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1117507.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

PHILIPP, B. L. Cold Vacuum Drying (CVD) Electrical Equipment Hydrogen Hazard Protection. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/801154.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Takeshita, Toshiho. Some Problems About Electrical Equipment of the Truck Body. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0082.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Modlo, Yevhenii O., Serhiy O. Semerikov, Stanislav L. Bondarevskyi, Stanislav T. Tolmachev, Oksana M. Markova, and Pavlo P. Nechypurenko. Methods of using mobile Internet devices in the formation of the general scientific component of bachelor in electromechanics competency in modeling of technical objects. [б. в.], 2020. http://dx.doi.org/10.31812/123456789/3677.

Повний текст джерела

Анотація:

An analysis of the experience of professional training bachelors of electromechanics in Ukraine and abroad made it possible to determine that one of the leading trends in its modernization is the synergistic integration of various engineering branches (mechanical, electrical, electronic engineering and automation) in mechatronics for the purpose of design, manufacture, operation and maintenance electromechanical equipment. Teaching mechatronics provides for the meaningful integration of various disciplines of professional and practical training bachelors of electromechanics based on the concep

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!