Готові списки джерел за темами / Gelatin Molded

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій

Добірка наукової літератури з теми "Gelatin Molded"

Автор: Grafiati

Опубліковано: 7 червня 2025

Оновлено: 2 серпня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Gelatin Molded".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Gelatin Molded"

Dubrovina, S. S., V. A. Grohovskiy, S. Yu Dubrovin, E. D. Obluchinskaya, and E. V. Gorshenina. "A new direction of Pollock use." Fisheries, no. 4 (February 27, 2025): 119–28. https://doi.org/10.36038/0131-6184-2024-4-119-128.

Повний текст джерела

Анотація:

A fundamentally new molded fish product has been developed, characterized by the use of dried salted pollock fillet and gelatin solution as a structure-forming agent in the formulation. An algorithm for manufacturing the product has been developed, and the main prescription components have been determined. The three-component composite composition of the new molded product has been optimized, including gelatin solution and crushed salted-dried flounder-ruff meat and pollock meat. The recommended shelf life of the product has been determined.

Стилі APA, Harvard, Vancouver, ISO та ін.

Dubrovina, S. S., V. A. Grohovskiy, and S. Y. Dubrovin. "Half-dried fish with improved properties." Proceedings of the Voronezh State University of Engineering Technologies 84, no. 4 (2023): 133–40. http://dx.doi.org/10.20914/2310-1202-2022-4-133-140.

Повний текст джерела

Анотація:

The research of gelling ability of different grades of food gelatin has been conducted, analytical researches have been carried out to establish the possibility of using a mass and inexpensive object of fishing - pollack for food purposes; the technological scheme of making a new structured fish product has been developed and experiments on its making have been carried out. There has been developed a scale of organoleptic evaluation of structured fish product quality, including significance coefficients, the highest of which are typical sensory indices: appearance, taste, consistency, flavour

Стилі APA, Harvard, Vancouver, ISO та ін.

Bunch, Elaine A. "Spectrophotometric Determination of Aminacrine Hydrochloride in Creams, Jellies, and Suppositories: Interlaboratory Study." Journal of AOAC INTERNATIONAL 70, no. 3 (1987): 560–65. http://dx.doi.org/10.1093/jaoac/70.3.560.

Повний текст джерела

Анотація:

Abstract A previously reported visible spectrophotometric method for the analysis of aminacrine hydrochloride in creams, jellies, and suppositories was studied collaboratively by 8 laboratories. Aminacrine hydrochloride was extracted into acidic ethanol and its visible spectrum recorded. The amount present was calculated by determining the net absorbance between the absorbance maximum at about 402 nm and one-half the sum of the absorbance of the minima at about 389 and 412 nm. Each collaborator received 4 creams (0.2%), 1 jel (0.2%), 1 molded suppository (6 mg/3.198 g), and 2 gelatin-encapsula

Стилі APA, Harvard, Vancouver, ISO та ін.

Golden, Andrew P., and Joe Tien. "Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element." Lab on a Chip 7, no. 6 (2007): 720. http://dx.doi.org/10.1039/b618409j.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Arni, L. S., L. Purnamayati, and P. H. Riyadi. "Effect of Chitosan on Physical Characteristic of Tapioca Edible Film with Ariid Catfish Bone Gelatin (Arius thalassinus)." IOP Conference Series: Earth and Environmental Science 1224, no. 1 (2023): 012037. http://dx.doi.org/10.1088/1755-1315/1224/1/012037.

Повний текст джерела

Анотація:

Abstract Ariid catfish is a demersal fish species with a high production rate. Fishbone is a by-product with protein content converted into gelatin. Gelatin can be utilized as an edible film due to its low water resistance and low tensile strength so that a suitable polymer is needed to form a good film, namely chitosan and tapioca starch. This study aimed to determine the effect of chitosan on the characteristics and the best formulation of tapioca edible film with ariid catfish bone gelatin. The method of making the edible film is by extracting gelatin, then gelatin is mixed with tapioca sta

Стилі APA, Harvard, Vancouver, ISO та ін.

Balabram, Sara Kierulff, Larissa Tessaro, Maria Eduarda de Almeida Astolfo, Pedro Augusto Invernizzi Sponchiado, Stanislau Bogusz Junior, and Bianca C. Maniglia. "Development of NADES–Annatto Seed Extract for Enhancing 3D Printed Food Designed for Dysphagia Patients." Foods 14, no. 9 (2025): 1604. https://doi.org/10.3390/foods14091604.

Повний текст джерела

Анотація:

This study develops a 3D printed food designed for dysphagia patients, incorporating a natural deep eutectic solvent (NADES)–annatto seed extract. The objective was to enhance textural properties and bioactive retention in food matrices tailored for individuals with swallowing difficulties. NADES extraction was compared to ethanol, with the extracts incorporated into gelatin and starch hydrogels. Gelatin, a widely used biopolymer, improved mechanical properties and printability, ensuring a cohesive and structured matrix for 3D printing. Textural analysis showed that starch-based 3D printed hyd

Стилі APA, Harvard, Vancouver, ISO та ін.

Hossan, MJ, MA Gafur, MM Karim, and AA Rana. "Mechanical properties of Gelatin Hydroxyapatite composite for bone tissue engineering." Bangladesh Journal of Scientific and Industrial Research 50, no. 1 (2015): 15–20. http://dx.doi.org/10.3329/bjsir.v50i1.23805.

Повний текст джерела

Анотація:

In this study, hydroxyapatite (HAp) and gelatin (GEL) scaffolds were prepared to mimic the mineral and organic component of natural bone. The raw material was first compounded and resulting composite were molded into the petridishes. Using Solvent casting process, it is possible to produce scaffolds with mechanical and structural properties close to natural trabecular bone.The mechanical properties of composites were investigated by Thermo-mechanical analyzer (TMA), Vickers microhardness tester, Universal testing machine. It was observed that the composite has maximum tensile strength of 37.13

Стилі APA, Harvard, Vancouver, ISO та ін.

Pedrosa, Thiago Cajú, Rossanna Trócolli, Wladymyr Jefferson Bacalhau de Sousa, et al. "Development of Gelatin/Misoprostol Compounds for Use in Pregnancy Failures." Materials 14, no. 23 (2021): 7250. http://dx.doi.org/10.3390/ma14237250.

Повний текст джерела

Анотація:

Early abortion is one of the most common complications during pregnancy. However, the frequent handling of the genital region, more precisely the vagina, which causes discomfort to patients in this abortion process due to the frequency of drug insertion, as four pills are inserted every six hours, has led to the search for alternatives to alleviate the suffering caused by this practice in patients who are already in a shaken emotional state. Hence, this work aimed to develop composites of gelatin and misoprostol, using a conventional single-dose drug delivery system. These composites were prep

Стилі APA, Harvard, Vancouver, ISO та ін.

Guillén-Carvajal, Karen, Benjamín Valdez-Salas, Ernesto Beltrán-Partida, Jorge Salomón-Carlos, and Nelson Cheng. "Chitosan, Gelatin, and Collagen Hydrogels for Bone Regeneration." Polymers 15, no. 13 (2023): 2762. http://dx.doi.org/10.3390/polym15132762.

Повний текст джерела

Анотація:

Hydrogels are versatile biomaterials characterized by three-dimensional, cross-linked, highly hydrated polymeric networks. These polymers exhibit a great variety of biochemical and biophysical properties, which allow for the diffusion of diverse molecules, such as drugs, active ingredients, growth factors, and nanoparticles. Meanwhile, these polymers can control chemical and molecular interactions at the cellular level. The polymeric network can be molded into different structures, imitating the structural characteristics of surrounding tissues and bone defects. Interestingly, the application

Стилі APA, Harvard, Vancouver, ISO та ін.

Strother, Heather, Rachael Moss, and Matthew B. McSweeney. "Comparison of 3D printed and molded carrots produced with gelatin, guar gum and xanthan gum." Journal of Texture Studies 51, no. 6 (2020): 852–60. http://dx.doi.org/10.1111/jtxs.12545.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Gelatin Molded"

Manbeck, Analena. "The effect of gelatin bloom strength on dry extruded pet food and injection molded treats." Thesis, Kansas State University, 2015. http://hdl.handle.net/2097/20605.

Повний текст джерела

Анотація:

Master of Science<br>Department of Grain Science and Industry<br>Greg Aldrich<br>Pet food is a $23 billion industry that continues to grow. Owners continue to humanize their pets and their dietary needs, thus the pet food industry tends to mirror human dietary trends. Currently, pet food is trending towards higher levels of protein, thus lower levels of starch. Decreasing starch, one of the main structure forming ingredients in extruded foods, creates issues in terms of lower rates of expansion and decreased kibble durability. Consumers tend to dislike ingredients that do not serve a dual nutr

Стилі APA, Harvard, Vancouver, ISO та ін.

Chatham, Sarah Marianna. "Characterisation of molten filled hard gelatin capsules." Thesis, King's College London (University of London), 1985. https://kclpure.kcl.ac.uk/portal/en/theses/characterisation-of-molten-filled-hard-gelatin-capsules(5b2e73bf-b02c-4ecc-b00a-146fd90ec814).html.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Gelatin Molded"

Jelly Mongers Glowinthedark Jelly Titanic Jelly Flaming Jelly. Sterling Epicure, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Brears, Peter. Jellies and Their Moulds. Boyars Publishers, Ltd., Marion, 2010.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Gelatin Molded"

Lee, Dai Gil, and Nam Pyo Suh. "Axiomatic Design of Materials and Materials-Processing Techniques." In Axiomatic Design and Fabrication of Composite Structures. Oxford University PressNew York, NY, 2005. http://dx.doi.org/10.1093/oso/9780195178777.003.0012.

Повний текст джерела

Анотація:

Abstract In the 1970s, airplane manufacturers were developing composite parts using the autoclave vacuum bag degassing method, which was discussed in chapter 2. However, the empirical approach they used encountered many problems. One of the problems was that sometimes the cured part would have a large void inside the composite structure, because the resin was depleted during the curing process. Resin depletion occurred because the viscosity of the resin initially decreased before the resin in the prepregs began to crosslink. Therefore, when a laminate consisting of prepregs and a honeycomb str

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Gelatin Molded"

Powell, Daniel E., W. Mark Bohon, and Gary R. Chesnut. "Solid Gel Pigs for Cleaning Production Pipelines." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96048.

Повний текст джерела

Анотація:

Abstract Many oil fields, such as that at Kuparuk, on the North Slope of Alaska, have been built as a trunk and lateral gathering system, with many different pipeline diameters in a branched network. No launchers nor receivers were built for the Kuparuk oil production pipelines. The high cost of retrofitting launchers and receivers prompted investigation of alternative methods for cleaning the pipelines. This paper describes a novel approach to mold solid gelatin pigs in bypass lines, and to run those pigs through the production pipelines to the primary separators. The gelatin pigs would slowl

Стилі APA, Harvard, Vancouver, ISO та ін.

Occhetta, Paola, Nasser Sadr, Francesco Piraino, Alberto Redaelli, Matteo Moretti, and Marco Rasponi. "Validation of a Novel Microscale Mold Patterning Protocol Based on Gelatin Methacrylate Photopolymerizable Hydrogels." In ASME 2012 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/sbc2012-80723.

Повний текст джерела

Анотація:

Native tissues are composed of functional three-dimensional (3D) units on the scale of 100–1000μm. The 3D architecture of these repeating units underlies the coordination of multicellular processes such as proliferation, differentiation, migration and apoptosis[1]. The requirement for 3D biomimetic matrices to mimic in vitro the ECM microarchitecture found in vivo becomes relevant in complex and vascularized tissue engineered models[2]. Among others, photopolymerizable hydrogels offer tunable geometrical features similar to the macromolecular-based components of soft ECM [3], can be crosslinke

Стилі APA, Harvard, Vancouver, ISO та ін.

Antunes Junior, Osmar Dos Reis, Diego Cleber Trindade, Erison Brayon Batista, Alana Carolina Alberton, and Araceli Scalcon. "REUTILIZAÇÃO DE APARAS DE GELATINA GERADAS NO PROCESSO PRODUTIVO DE CÁPSULAS GELATINOSAS MOLES." In Anais do Congresso Brasileiro Interdisciplinar em Ciência e Tecnologia. Even3, 2022. http://dx.doi.org/10.29327/167942.3-75.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ngo, Nam D., and Kumar K. Tamma. "Non-Isothermal “2-D Flow/3-D Thermal” Developments Encompassing Process Modeling of Composites: Flow/Thermal/Cure Formulations and Validations." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0801.

Повний текст джерела

Анотація:

Abstract In the manufacturing process of large geometrically complex components comprising of fiber-reinforced composite materials by Resin Transfer Molding (RTM), the process involves injection of resin into a mold cavity filled with porous fiber preforms. The overall success of the RTM manufacturing process depends on the complete impregnation of the fiber mat by the polymer resin, prevention of polymer gelation during filling, and subsequent avoidance of dry spots. Since a cold resin is injected into a hot mold, the associated physics encompasses a moving boundary value problem in conjuncti

Стилі APA, Harvard, Vancouver, ISO та ін.

Mukhtar, Mustafa, and Donald Klosterman. "Investigation of Chemorheology and Curing Kinetics of Cyanate Ester/Epoxy Blends with A Reactive Flame Retardant using Differential Scanning Calorimetry and Rheological Measurements." In SAMPE 2025 Indianapolis. Society for the Advancement of Material and Process Engineering, 2025. https://doi.org/10.33599/nasampe/s.25.0047.

Повний текст джерела

Анотація:

Cyanate ester (CE) and epoxy (EP) resin blends are widely used in aerospace, automotive, and electronics due to their thermal stability, mechanical toughness, and cost-effectiveness. However, incorporating flame retardants like poly(m-phenylene methylphosphonate) (PMP) alters curing kinetics and rheology. This study examines the impact of 3 wt% PMP on CE/EP blends to optimize processing for autoclave curing. Differential scanning calorimetry (DSC) and rheometer reveal a PMP-induced dual-stage curing mechanism, with activation energies of 80 kJ/mol and 115 kJ/mol for initial and final stages, r

Стилі APA, Harvard, Vancouver, ISO та ін.

Hotz, Nico. "Micro- and Nano-Structured Catalytic Reactor for Biofuel Reforming in a Solar Collector." In ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/es2012-91338.

Повний текст джерела

Анотація:

In this study, a novel flow-based method is presented to place catalytic nanoparticles into a reactor by solgelation of a porous ceramic consisting of copper-based nanoparticles, silica sand, ceramic binder, and a gelation agent. This method allows for the placement of a liquid precursor containing the catalyst into the final reactor geometry without the need of impregnating or coating of a substrate with the catalytic material. The so generated foam-like porous ceramic shows properties highly appropriate for use as catalytic reactor material, e.g., reasonable pressure drop due to its porosity

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Haipeng, Aidan Johnson, Sangjin Ryu, Seunghee Kim, and Chi (Kevin) Zhang. "Fabrication of Heterogeneous Hydrogel Models for Convection-Enhanced Drug Delivery Studies." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-67615.

Повний текст джерела

Анотація:

Abstract Convection-enhanced drug delivery (CED) enables faster convective dispersion of drug molecules through soft, porous tissues than diffusion, which is beneficial for treating aggressive tumors. Advancing the CED technology requires rigorous characterization of fluid transport through soft, porous tissues. When a fluid flows through soft, porous tissues, the deformation and/or structural rearrangement of the hosting solid alters the pattern and efficiency of fluid propagation. Such hydro-mechanical coupling can be understood by experimentally studying fluid flows through hydrogel phantom

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!