Готові списки джерел за темами / Interaction diagrams

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій
  6. Звіти організацій

Добірка наукової літератури з теми "Interaction diagrams"

Автор: Grafiati
Опубліковано: 24 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Interaction diagrams".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Interaction diagrams"

1

Whittle, Jon. "Extending interaction overview diagrams with activity diagram constructs." Software & Systems Modeling 9, no. 2 (February 24, 2009): 203–24. http://dx.doi.org/10.1007/s10270-009-0114-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

DE LACY COSTELLO, BEN, NORMAN RATCLIFFE, ANDREW ADAMATZKY, ALEXEY L. ZANIN, ANDREAS W. LIEHR, and HANS-GEORG PURWINS. "THE FORMATION OF VORONOI DIAGRAMS IN CHEMICAL AND PHYSICAL SYSTEMS: EXPERIMENTAL FINDINGS AND THEORETICAL MODELS." International Journal of Bifurcation and Chaos 14, no. 07 (July 2004): 2187–210. http://dx.doi.org/10.1142/s021812740401059x.

Повний текст джерела
Анотація:
The work discusses the formation of Voronoi diagrams in spatially extended nonlinear systems taking experimental and theoretical results into account. Concerning experimental systems a number of chemical systems used previously as prototype chemical processors and a barrier gas-discharge system are investigated. Although the underlying microscopic processes are very different, both types of systems show self-organized Voronoi diagrams for suitable parameters. Indeed certain chemical systems exhibit Voronoi diagrams as an output state for two distinct sets of parameters one that corresponds to the interaction of stable forced trigger waves and the other that corresponds to the spontaneous initiation and interaction of waves due to point instabilities in the system. In the case of the chemical systems front initiation, propagation and interaction (annihilation) are the primary mechanisms for Voronoi diagram formation, in the case of the barrier gas-discharge system regions of vanishing electric field define the medial axes of the Voronoi diagram. On the basis of cellular automata models the general concept of the formation of Voronoi diagrams has been explained, and related mechanisms have been simulated. Another intuitive approach towards the understanding of self-organized Voronoi diagrams has been given on the basis of reaction–diffusion models explaining the formation of Voronoi diagrams as a result of the mutual interactions of trigger fronts. The variety of systems exhibiting Voronoi diagrams as stationary states indicates that Voronoi diagrams are a generic and natural pattern formation phenomenon.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kohn, Kurt W., Mirit I. Aladjem, John N. Weinstein, and Yves Pommier. "Molecular Interaction Maps of Bioregulatory Networks: A General Rubric for Systems Biology." Molecular Biology of the Cell 17, no. 1 (January 2006): 1–13. http://dx.doi.org/10.1091/mbc.e05-09-0824.

Повний текст джерела
Анотація:
A standard for bioregulatory network diagrams is urgently needed in the same way that circuit diagrams are needed in electronics. Several graphical notations have been proposed, but none has become standard. We have prepared many detailed bioregulatory network diagrams using the molecular interaction map (MIM) notation, and we now feel confident that it is suitable as a standard. Here, we describe the MIM notation formally and discuss its merits relative to alternative proposals. We show by simple examples how to denote all of the molecular interactions commonly found in bioregulatory networks. There are two forms of MIM diagrams. “Heuristic” MIMs present the repertoire of interactions possible for molecules that are colocalized in time and place. “Explicit” MIMs define particular models (derived from heuristic MIMs) for computer simulation. We show also how pathways or processes can be highlighted on a canonical heuristic MIM. Drawing a MIM diagram, adhering to the rules of notation, imposes a logical discipline that sharpens one's understanding of the structure and function of a network.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kim, Han Gyeol, Joonho Lee, and Guy Makov. "Phase Diagram of Binary Alloy Nanoparticles under High Pressure." Materials 14, no. 11 (May 29, 2021): 2929. http://dx.doi.org/10.3390/ma14112929.

Повний текст джерела
Анотація:
CALPHAD (CALculation of PHAse Diagram) is a useful tool to construct phase diagrams of various materials under different thermodynamic conditions. Researchers have extended the use of the CALPHAD method to nanophase diagrams and pressure phase diagrams. In this study, the phase diagram of an arbitrary A–B nanoparticle system under pressure was investigated. The effects of the interaction parameter and excess volume were investigated with increasing pressure. The eutectic temperature was found to decrease in most cases, except when the interaction parameter in the liquid was zero and that in the solid was positive, while the excess volume parameter of the liquid was positive. Under these conditions, the eutectic temperature increased with increasing pressure.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Plavsic, Vera, and Emil Secerov. "Modeling of login procedure for wireless application with interaction overview diagrams." Computer Science and Information Systems 5, no. 1 (2008): 87–108. http://dx.doi.org/10.2298/csis0801087p.

Повний текст джерела
Анотація:
In this paper we describe in details UML modeling of login procedure, which is a part of UserBarCodeReader application, developed for large stores and intended for use as a customer support during the shopping session. Login procedure is realized within access control system, in this case over a wireless network. Paper gives the whole modeling and implementation cycle of login procedure, from Use Case diagrams to the Java source code. Login procedure is modeled using interaction overview diagram, new in UML 2.0 which gives concise representation and divides complex sequence diagram into several smaller. The link between these diagrams is modeled with OCL postcondition and precondition expressions.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Pasupathi, Padma, Christopher W. Schankula, Nicole DiVincenzo, Sarah Coker, and Christopher Kumar Anand. "Teaching Interaction using State Diagrams." Electronic Proceedings in Theoretical Computer Science 363 (July 24, 2022): 132–52. http://dx.doi.org/10.4204/eptcs.363.8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Weng, Jianguang. "Pseudohaptic interaction with knot diagrams." Journal of Electronic Imaging 21, no. 3 (July 12, 2012): 033008. http://dx.doi.org/10.1117/1.jei.21.3.033008.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Adi darma, Wawang. "Perancangan Sistem Produksi Lampu dengan Metode Perancangan Berorientasi Objek di PT. Cosmo Technology Indonesia Kabupaten Sukabumi." JURNAL BUANA INFORMATIKA CBI 5, no. 2 (December 11, 2022): 142–57. http://dx.doi.org/10.53918/jbicbi.v5i2.34.

Повний текст джерела
Анотація:
The development of information technology (IT) so rapidly, including for the field of ERP (Enterprice Resources Planning). To design and build an ERP system, it is necessary to first analyze the system to be built, especially for the design of Rekayas Software (RPL). The results of this study are expected to find the results of good and correct analysis so as to be able to implement the system into a program using JAVA. This research consists of several parts analysis. The core of this research is to review the problems that exist in the company, in determining user requirements or user needs, then generate design in the form of diagrams used as a system design tool. The point explanation that will be done is Business Overview, Organizational Structure, Department Description, User Requirement. While the design of the system using UML consisting of several diagrams are Activity Diagram, Use Case Diagram, Sequence Diagram, Class Diagrams, Entity Diagrams, Communication diagrams, State Machine Diagrams, Component Diagrams, Deployment Diagrams, Composite Structure Diagrams, Interaction Overview Diagrams, Object Diagrams , Package Diagram, Timing Diagram, The author takes the object case that is PT. COSMO TECHNOLOGY which is located at Jl. Raya Segog Km.14 Batununggal Village Kec. Cibadak, Sukabumi-West Java. Is a company engaged in decorative lights and is developing a business in the field of toys. Keywords: ERP, UML
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Vidgen, R. "Requirements analysis and UML - interaction diagrams and state transition diagrams." Computing and Control Engineering 14, no. 3 (June 1, 2003): 7–11. http://dx.doi.org/10.1049/cce:20030301.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Nestsiarovich, Kristina, and Dirk Pons. "Interaction Diagrams: Development of a Method for Observing Group Interactions." Behavioral Sciences 9, no. 1 (December 30, 2018): 5. http://dx.doi.org/10.3390/bs9010005.

Повний текст джерела
Анотація:
Recording of team meeting’s processes with electronic devices can be problematic because of the invasiveness of the process: issues with privacy; interpretation difficulty with noise or quiet speech; and distortion of participants’ behaviour. There is a need for less intrusive methods. We developed the interaction diagram method by extending the directed graph nature of sociograms to capture the time sequence of events, including the identification of the person, communication behaviour, and duration of interactions. The method was tested on engineering team meetings. Data processing by quantitative and qualitative analysis is shown to be feasible. Several team roles were observed in the engineering context: Initiator; Passive collector; Explorer; Information provider; Facilitator; Arbitrator; Representative; Gatekeeper; Connector; and Outsider. The work provides a graphical representation of the record of the interaction flow during meetings. It does this without needing video recording. It is also an efficient method, as it does not require subsequent transcription or coding. It provides a procedure to quickly analyse communication situations, identify group roles, and compare group activity at different meetings.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Interaction diagrams"

1

Blackwell, Alan Frank. "Metaphor in diagrams." Thesis, University of Cambridge, 1998. https://www.repository.cam.ac.uk/handle/1810/272809.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Metatla, Oussama. "Collaborating through sounds : audio-only interaction with diagrams." Thesis, Queen Mary, University of London, 2010. http://qmro.qmul.ac.uk/xmlui/handle/123456789/1324.

Повний текст джерела
Анотація:
The widening spectrum of interaction contexts and users’ needs continues to expose the limitations of the Graphical User Interface. But despite the benefits of sound in everyday activities and considerable progress in Auditory Display research, audio remains under-explored in Human- Computer Interaction (HCI). This thesis seeks to contribute to unveiling the potential of using audio in HCI by building on and extending current research on how we interact with and through the auditory modality. Its central premise is that audio, by itself, can effectively support collaborative interaction with diagrammatically represented information. Before exploring audio-only collaborative interaction, two preliminary questions are raised; first, how to translate a given diagram to an alternative form that can be accessed in audio; and second, how to support audio-only interaction with diagrams through the resulting form. An analysis of diagrams that emphasises their properties as external representations is used to address the first question. This analysis informs the design of a multiple perspective hierarchybased model that captures modality-independent features of a diagram when translating it into an audio accessible form. Two user studies then address the second question by examining the feasibility of the developed model to support the activities of inspecting, constructing and editing diagrams in audio. The developed model is then deployed in a collaborative lab-based context. A third study explores audio-only collaboration by examining pairs of participants who use audio as the sole means to communicate, access and edit shared diagrams. The channels through which audio is delivered to the workspace are controlled, and the effect on the dynamics of the collaborations is investigated. Results show that pairs of participants are able to collaboratively construct diagrams through sounds. Additionally, the presence or absence of audio in the workspace, and the way in which collaborators chose to work with audio were found to impact patterns of collaborative organisation, awareness of contribution to shared tasks and exchange of workspace awareness information. This work contributes to the areas of Auditory Display and HCI by providing empirically grounded evidence of how the auditory modality can be used to support individual and collaborative interaction with diagrams.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Björklund, Daniel. "Forward engineering from interaction diagrams - can it be useful?" Thesis, University West, Department of Informatics and Mathematics, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-582.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ducasse, Julie. "Tabletop tangible maps and diagrams for visually impaired users." Thesis, Toulouse 3, 2017. http://www.theses.fr/2017TOU30197/document.

Повний текст джерела
Анотація:
En dépit de leur omniprésence et de leur rôle essentiel dans nos vies professionnelles et personnelles, les représentations graphiques, qu'elles soient numériques ou sur papier, ne sont pas accessibles aux personnes déficientes visuelles car elles ne fournissent pas d'informations tactiles. Par ailleurs, les inégalités d'accès à ces représentations ne cessent de s'accroître ; grâce au développement de représentations graphiques dynamiques et disponibles en ligne, les personnes voyantes peuvent non seulement accéder à de grandes quantités de données, mais aussi interagir avec ces données par le biais de fonctionnalités avancées (changement d'échelle, sélection des données à afficher, etc.). En revanche, pour les personnes déficientes visuelles, les techniques actuellement utilisées pour rendre accessibles les cartes et les diagrammes nécessitent l'intervention de spécialistes et ne permettent pas la création de représentations interactives. Cependant, les récentes avancées dans le domaine de l'adaptation automatique de contenus laissent entrevoir, dans les prochaines années, une augmentation de la quantité de contenus adaptés. Cette augmentation doit aller de pair avec le développement de dispositifs utilisables et abordables en mesure de supporter l'affichage de représentations interactives et rapidement modifiables, tout en étant accessibles aux personnes déficientes visuelles. Certains prototypes de recherche s'appuient sur une représentation numérique seulement : ils peuvent être instantanément modifiés mais ne fournissent que très peu de retour tactile, ce qui rend leur exploration complexe d'un point de vue cognitif et impose de fortes contraintes sur le contenu. D'autres prototypes s'appuient sur une représentation numérique et physique : bien qu'ils puissent être explorés tactilement, ce qui est un réel avantage, ils nécessitent un support tactile qui empêche toute modification rapide. Quant aux dispositifs similaires à des tablettes Braille, mais avec des milliers de picots, leur coût est prohibitif. L'objectif de cette thèse est de pallier les limitations de ces approches en étudiant comment développer des cartes et diagrammes interactifs physiques, modifiables et abordables. Pour cela, nous nous appuyons sur un type d'interface qui a rarement été étudié pour des utilisateurs déficients visuels : les interfaces tangibles, et plus particulièrement les interfaces tangibles sur table. Dans ces interfaces, des objets physiques représentent des informations numériques et peuvent être manipulés par l'utilisateur pour interagir avec le système, ou par le système lui-même pour refléter un changement du modèle numérique - on parle alors d'interfaces tangibles sur tables animées, ou actuated. Grâce à la conception, au développement et à l'évaluation de trois interfaces tangibles sur table (les Tangible Reels, la Tangible Box et BotMap), nous proposons un ensemble de solutions techniques répondant aux spécificités des interfaces tangibles pour des personnes déficientes visuelles, ainsi que de nouvelles techniques d'interaction non-visuelles, notamment pour la reconstruction d'une carte ou d'un diagramme et l'exploration de cartes de type " Pan & Zoom ". D'un point de vue théorique, nous proposons aussi une nouvelle classification pour les dispositifs interactifs accessibles
Despite their omnipresence and essential role in our everyday lives, online and printed graphical representations are inaccessible to visually impaired people because they cannot be explored using the sense of touch. The gap between sighted and visually impaired people's access to graphical representations is constantly growing due to the increasing development and availability of online and dynamic representations that not only give sighted people the opportunity to access large amounts of data, but also to interact with them using advanced functionalities such as panning, zooming and filtering. In contrast, the techniques currently used to make maps and diagrams accessible to visually impaired people require the intervention of tactile graphics specialists and result in non-interactive tactile representations. However, based on recent advances in the automatic production of content, we can expect in the coming years a growth in the availability of adapted content, which must go hand-in-hand with the development of affordable and usable devices. In particular, these devices should make full use of visually impaired users' perceptual capacities and support the display of interactive and updatable representations. A number of research prototypes have already been developed. Some rely on digital representation only, and although they have the great advantage of being instantly updatable, they provide very limited tactile feedback, which makes their exploration cognitively demanding and imposes heavy restrictions on content. On the other hand, most prototypes that rely on digital and physical representations allow for a two-handed exploration that is both natural and efficient at retrieving and encoding spatial information, but they are physically limited by the use of a tactile overlay, making them impossible to update. Other alternatives are either extremely expensive (e.g. braille tablets) or offer a slow and limited way to update the representation (e.g. maps that are 3D-printed based on users' inputs). In this thesis, we propose to bridge the gap between these two approaches by investigating how to develop physical interactive maps and diagrams that support two-handed exploration, while at the same time being updatable and affordable. To do so, we build on previous research on Tangible User Interfaces (TUI) and particularly on (actuated) tabletop TUIs, two fields of research that have surprisingly received very little interest concerning visually impaired users. Based on the design, implementation and evaluation of three tabletop TUIs (the Tangible Reels, the Tangible Box and BotMap), we propose innovative non-visual interaction techniques and technical solutions that will hopefully serve as a basis for the design of future TUIs for visually impaired users, and encourage their development and use. We investigate how tangible maps and diagrams can support various tasks, ranging from the (re)construction of diagrams to the exploration of maps by panning and zooming. From a theoretical perspective we contribute to the research on accessible graphical representations by highlighting how research on maps can feed research on diagrams and vice-versa. We also propose a classification and comparison of existing prototypes to deliver a structured overview of current research
Стилі APA, Harvard, Vancouver, ISO та ін.
5

ARAUJO, ANA CAROLINA INNECCO C. DE. "SUPPORTING THE DESIGN AND THE INTERPRETATION OF HUMAN-COMPUTER INTERACTION DIAGRAMS REPRESENTED IN MOLIC." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2008. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=12418@1.

Повний текст джерела
Анотація:
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
Como os usuários de computadores pessoais costumam enxergar um sistema computacional interativo como a própria interface, é desejável que esta seja construída de forma que eles entendam para que serve o sistema, o que ele permite que seus usuários façam e de que forma, para quem se destina etc. De acordo com a Engenharia Semiótica, fundamentação teórica deste trabalho, tais questões são transmitidas aos usuários por uma metamensagem do designer, comunicada pela sua interface, através de conversas entre usuário e designer - este último através de seu representante em tempo de interação, o preposto do designer. A Engenharia Semiótica propõe, antes da construção da interface concreta, uma etapa de modelagem da interação usuário-sistema, na qual o designer modela todas as possíveis conversas que consegue prever para que os usuários atinjam suas metas. Para a execução desta etapa, criou-se, em 2003, a MoLIC (Modeling Language for Interaction as Conversation), uma linguagem de modelagem que representa a interação como as possíveis conversas entre usuário e designer. Apesar de ter sido proposta como uma ferramenta epistêmica, a MoLIC ainda não tinha tido suas características epistêmicas exploradas explicitamente. Este trabalho visa explorar o valor epistêmico da MoLIC, apoiando a reflexão do designer através de um conjunto de perguntas que ele pode se fazer sobre a representação da interação, de forma a atingir dois objetivos. O primeiro é apoiar a atividade de (re)design em si, através da explicitação das conseqüências das decisões de design representadas na MoLIC. O segundo é apoiar a interpretação da interação humano-computador, a fim de que o próprio designer ou um outro leitor seja capaz de entender e explicar modelos MoLIC seguindo a metáfora de uma conversa entre usuário e designer.
Personal computer users frequently view an interactive computational system as the user interface itself. Therefore, it´s desirable that such interface be developed in a way they can understand what the system is for, what it allows their users to do and in which way, for whom it´s made etc. Based on Semiotic Engineering, which is the theoretical foundation of this work, such issues are being conveyed to the users in a metamessage from the designer, communicated by its user interface, through conversations between the user and the designer - this one through his deputy at interaction time, the designer´s deputy. Before the concrete user interface is developed, Semiotic Engineering proposes to model the user-system interaction as a dialogue. In this stage, the designer models all the possible ways he anticipates that the users will be able to accomplish their goals. For this stage, a modeling language called MoLIC (Modeling Language for Interaction as Conversation) was created in 2003 to represent the interaction as the possible conversations between the user and the designer. Although it has been proposed as an epistemic tool, until now MoLIC had not had its epistemic features explored explicitly. This work aims to explore the epistemic value of MoLIC, supporting the designer`s reflection through a set of questions that he might ask for himself about the interaction representation, in order to accomplish two goals. The first one is to support the (re)design activity itself, by making explicit the consequences of the design decisions represented in MoLIC. The second one is to support the interpretation of the human-computer interaction represented in MoLIC, so that the designer or any other reader would be able to understand and explain MoLIC diagrams based on the conversation metaphor.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

ALVES, EVELYN GABBAY. "INTERACTION DIAGRAMS FOR THE DESIGN OF HIGH STRENGTH CONCRETE SLENDER COLUMNS AND CROSS-SECTIONS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2000. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=1784@1.

Повний текст джерела
Анотація:
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
A utilização do concreto de alta resistência já é uma realidade e muitos países estão adaptando suas normas para levar em conta as propriedades deste material. No dimensionamento de pilares esbeltos e seções com concreto de alta resistência é importante observar a relação tensão- deformação adotada no cálculo, pois enquanto para o concreto convencional a deformação máxima, ecu, é 0,0035, para o de alta resistência esta deformação depende do valor da resistência do concreto, diminuindo com o aumento do fck. Para um concreto com fck = 80 MPa, por exemplo, ecu é em torno de 0,0022 de acordo com as relações tensão - deformação propostas pelo MC90-CEB. A relação tensão- deformação com ecu dependente de fck irá alterar os diagramas de interação adimensionais para o dimensionamento de pilares esbeltos e concreto de alta resistência. São construídos neste trabalho diagramas de interação força normal - momento fletor - curvatura (n,m,f) e força normal - momento fletor - índice de esbeltez (n,m,l) para o dimensionamento de pilares esbeltos e diagramas de interação (nd,md) e (nd,mdx,mdy) para o dimensionamento de seções submetidas a flexão composta reta e oblíqua. Adotou- se a relação tensão-deformação proposta pelo MC90-CEB e valores de fck de 50 a 80 MPa. Os diagramas para pilares esbeltos foram construídos com auxílio do programa PCFRAME (KRÜGER, 1989) e os diagramas para o dimensionamento de seções foram construídos com um programa desenvolvido neste trabalho. Através dos resultados, observa-se que, como ecu depende de fck, todos os diagramas de interação sofreram diferenças, podendo ser dito ainda que o uso dos diagramas já existentes, construídos com ecu constante e igual a 0,0035, pode conduzir a erros contra a segurança estrutural.
The use of high strength concrete is already a reality and many countries are adapting their design codes to take into account the properties of this material. For the design of slender columns and sections subjected to combined axial force and bending, the most important property is the stress-strain relationship. While for normal concrete the strain at ultimate, ecu, can be considered constant and equal to 0,0035, for high strength concrete ecu depends on the concrete strength, decreasing as the strength increases. For a concrete with fck of 80 MPa, for instance, ecu is around 0,0022 according to the CEB Model Code (1990). Stress-strain relationship with ecu dependent of fck will affect the nondimensional interaction diagrams for the design of slender columns and sections of high strength concretes. Nondimensional interaction diagrams moment-axial load-curvature (m,n,f) and diagrams moment-axial load- slenderness ratio (m,n,l), for the design of slender columns, and nondimensional interaction diagrams (md,nd) and (nd,mdx,mdy) , for compression plus axial and biaxial bending of sections, are constructed in this work. The diagrams were constructed for concretes with strength between 50 MPa and 80 MPa, adopting suitable stress-strain relationships recommended by the CEB Model Code 1990. The diagrams for slender columns were constructed with the aid of an existing computational program developed in an earlier thesis, while the diagrams for the design of sections were constructed with a new program, specially developed in this work. The results have shown that all these diagrams are affected, even when presented in a nondimensional form, when stress-strain diagrams with ecu dependent of fck are adopted. The use of traditional nondimensional interaction diagrams, constructed with ecu constant and equal to 0,0035, may lead to errors against structural safety.
La utilización del concreto de alta resistencia es una realidad actual y muchos países estan adaptando sus normas para tener en cuenta las propiedades de este material. En el dimensionamiento de pilares esbeltos y secciones con concreto de alta resistencia es importante observar la relación tensión-deformación que se adopta en el cálculo, porque mientras para el concreto convencional la deformación máxima, ecu, es 0,0035, para el de alta resistencia esta deformación depende del valor de la resistencia del concreto, diminuyendo con el aumento del fck. Para un concreto con fck = 80 MPa, por ejemplo, ecu es en torno de 0,0022 de acordo con las relaciones tensión - deformación propostas por el MC90-CEB. La relación tensión- deformación con ecu dependente de fck alterará los diagramas de interacción adimensionales para el dimensionamiento de pilares esbeltos y concreto de alta resistencia. En este trabajo se construyen diagramas de interacción fuerza normal - momento flector - curvatura (n,m,f) y fuerza normal - momento flector - índice de esbeltez (n,m,l) para el dimensionamiento de pilares esbeltos y diagramas de interacción (nd,md) y (nd,mdx,mdy) para el dimensionamiento de secciones sometidas a flexión compuesta recta y obliqua. se adoptó la relación tensión-deformación propuesta por el MC90-CEB y valores de fck de 50 la 80 MPa. Los diagramas para pilares esbeltos fueron construidos con auxilio del programa PCFRAME (KRÜGER, 1989) e implementamos un programa para obtener los diagramas para el dimensionamiento de las secciones. A través de los resultados se observa que, como ecu depende de fck, todos los diagramas de interacción sufren diferencias, y puede decirse que el uso de los diagramas construidos con ecu constante e igual la 0,0035, pueden conducir a errores que afectan la seguridad extructural.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Martin, Timothy Michael. "Codes of Interaction." VCU Scholars Compass, 2005. http://scholarscompass.vcu.edu/etd/849.

Повний текст джерела
Анотація:
The ideas within this thesis are meant to clarify my explorations, research and painting practice during my studies at Virginia Commonwealth University. I expand on my general statements about being fascinated by advancing technologies and concerned about the after effects of these advancements. The writing explores my curiosity about the internal, skeletal structure of things and how they operate. I explain how the paintings are idiosyncratic hybrids that evoke animation, imaginary scientific propositions, blueprints, maps, and advancing technologies. The work combines these interests with my observations of day-to-day experiences. Isolated events provide found compositions which I then manipulate: a seemingly mundane bike ride gets mapped into a well–ordered schematic of social interaction.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Abouelleil, Alaaeldin. "Interaction domain in non-prestressed circular concrete bridge piers using simplified modified compression field theory." Thesis, Kansas State University, 2015. http://hdl.handle.net/2097/18996.

Повний текст джерела
Анотація:
Master of Science
Department of Civil Engineering
Hayder Rasheed
The importance of the analysis of circular columns to accurately predict their ultimate confined capacity under shear-flexure-axial force interaction domain is recognized in light of the extreme load event imposed by the current AASHTO LRFD specification. In this study, various procedures for computing the shear strength are reviewed. Then, the current procedure adopted by AASHTO LRFD 2014, based on the simplified modified compression field theory, is evaluated for non-presetressed circular concrete bridge piers. This evaluation is benchmarked against experimental data available in the literature and against Response 2000 freeware program that depicts interaction diagrams based on AASHTO 1999 requirements. Differences in results are discussed and future improvements are proposed. A new approach is presented to improve the accuracy of AASHTO LRFD calculations. The main parameters that control the cross section shear strength are discussed based on the experimental results and comparisons.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Louati, Aymen. "Contribution à la formalisation et à la vérification des diagrammes dynamiques UML2 à base des réseaux de Petri." Thesis, Paris, CNAM, 2015. http://www.theses.fr/2015CNAM1106/document.

Повний текст джерела
Анотація:
Les systèmes informatiques envahissent de plus en plus notre quotidien, en allant de la plus simple application de lecture des fichiers audio, à la plus critique comme les voitures et les avions. Dans les systèmes critiques, la validation par vérification formelle s'impose. Cette thèse s'inscrit dans ce cadre et tend à doter le langage UML, langage de modélisation standard de facto, d'une sémantique formelle pour des finalités de vérification. En premier lieu, nous avons analysé et révisé le fondement théorique des principales approches de formalisation et de vérification issues de la littérature et se focalisant sur le langage UML, ses profils et les concepts des réseaux de Petri (RdPs). En deuxième lieu, nous avons proposé une nouvelle approche hiérarchique de formalisation des diagrammes globaux d'interactions (IOD). En se basant sur ce point, nous avons développé des formalismes temporels et temporisés des diagrammes de Timing UML2 (TD), appliqués par des exemples d'illustration. Ensuite, nous avons conçu une approche de vérification sur les approches développées, s'intéressant aux Systèmes Temps Réel (STRs), utilisant l'extension temporelle du langage des contraintes objets OCL/Temps Réel (OCL TR), le profil UML MARTE et la logique temporelle temporisée (TCTL), exploitée d'une technique de vérification automatique après la transformation du modèle (Model Checking). Enfin, nous avons appliqué les formalismes proposés sur une étude de cas, afin de garantir leurs efficacités logique et temporelle
The computer systems have increasingly invaded our daily lives from the simplest application as audio files reading to the most critical one as cars and airplanes. For critical systems, the validation by the formal verification is required. This Thesis concerns this area of research and aims to ensure the betterment of UML language, which is the de facto standard, with formal semantics for verification finality. For the first part, we have analyzed and revised the theoretical foundations the existing formal verification methods used UML, their profiles and the basic concepts of the Petri nets (PNs). For the second part, we have created a novel hierarchical approach to formalize the Interaction Overview Diagrams (IOD). Based on this idea, we have developed temporal formalisms based on the UML2 Timing Diagrams (TD), applied by illustration examples. Then, we have proposed a Formal Verification approach based on last formalisms which are interested in Real Time Systems (RTS) and employ the temporal extension of the Object Constraints language (OCL/Real Time) (OCL TR), the UML MARTE profile and the timed computation Tree logic (TCTL), given by the Model Checking technique after the model's transformation. Finally, we have applied all the proposed formalisms through a case study, in order to ensure its logical and temporal efficiency
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Mikulka, David. "Pokročilý nástroj pro monitorování Oracle Databáze." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-237133.

Повний текст джерела
Анотація:
This master's thesis describes possibilities of Oracle Database 10g and 11g monitoring. It let the reader know about practical tools for monitoring and describes the database's internal catalogs preserving statistics and the information about running database instances within history. Next, it describes design of an Oracle database monitoring tool, describtion of its implementation and at the end its evaluation and comparison with other similar applications.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Interaction diagrams"

1

Alan, Dix, and Dittmar Anke, eds. TAMODIA 2005: 4th international workshop on task models and diagrams for user interface design. New York: Association for Computing Machinery, 2005.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Milʹshin, A. A. (Aleksandr Alekseevich), ed. Microwave radiation of the ocean-atmosphere: Boundary heat and dynamic interaction. Dordrecht: Springer, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

United States. Naval Oceanography Command Detachment, Asheville, N.C. U.S. Navy hindcast spectral ocean wave model climatic atlas: Mediterranean Sea. Asheville, N.C: The Detachment, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

United States. Naval Oceanography Command Detachment, Asheville, N.C. U.S. Navy hindcast spectral ocean wave model climatic atlas: Mediterranean Sea. Asheville, N.C: The Detachment, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

United, States Naval Oceanography Command Detachment Asheville N. C. U.S. Navy hindcast spectral ocean wave model climatic atlas: North Pacific Ocean. Asheville, N.C: The Detachment, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

United States. Naval Oceanography Command Detachment, Asheville, N.C. U.S. Navy hindcast spectral ocean wave model climatic atlas: Mediterranean Sea. Asheville, N.C: The Detachment, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

United, States Naval Oceanography Command Detachment Asheville N. C. U.S. Navy hindcast spectral ocean wave model climatic atlas: North Pacific Ocean. Asheville, N.C: The Detachment, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

United, States Naval Oceanography Command Detachment Asheville N. C. U.S. Navy hindcast spectral ocean wave model climatic atlas: North Pacific Ocean. Asheville, N.C: The Detachment, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

United States. Naval Oceanography Command Detachment, Asheville, N.C. U.S. Navy hindcast spectral ocean wave model climatic atlas: North Pacific Ocean. Washington, D.C: Dept. of the Navy, Oceanographic Office, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

United States. Naval Oceanography Command Detachment, Asheville, N.C. U.S. Navy hindcast spectral ocean wave model climatic atlas: Mediterranean Sea. Asheville, N.C: The Detachment, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Interaction diagrams"

1

Parrow, Joachim. "Interaction diagrams." In A Decade of Concurrency Reflections and Perspectives, 477–508. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/3-540-58043-3_26.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

D’Auria, Riccardo, and Mario Trigiante. "Fields in Interaction." In From Special Relativity to Feynman Diagrams, 453–559. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-22014-7_12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

D’Auria, Riccardo, and Mario Trigiante. "Fields in Interaction." In From Special Relativity to Feynman Diagrams, 433–535. Milano: Springer Milan, 2011. http://dx.doi.org/10.1007/978-88-470-1504-3_12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Cordes, Björn, Karsten Hölscher, and Hans-Jörg Kreowski. "UML Interaction Diagrams: Correct Translation of Sequence Diagrams into Collaboration Diagrams." In Applications of Graph Transformations with Industrial Relevance, 275–91. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-25959-6_20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ferro, Tyler, and Dianne Pawluk. "Providing Dynamic Access to Electronic Tactile Diagrams." In Universal Access in Human–Computer Interaction. Designing Novel Interactions, 269–82. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-58703-5_20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Whitman, Lisa. "The Effectiveness of Interactivity in Computer-Based Instructional Diagrams." In Human-Computer Interaction. Novel Interaction Methods and Techniques, 899–908. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-02577-8_98.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Stanton, Neville A., James W. H. Brown, Kirsten M. A. Revell, Patrick Langdon, Michael Bradley, Ioannis Politis, Lee Skrypchuk, Simon Thompson, and Alexandros Mouzakitis. "Validating Operator Event Sequence Diagrams." In Designing Interaction and Interfaces for Automated Vehicles, 137–57. First edition. | Boca Raton, FL : CRC Press/Taylor & Francis Group, LLC, 2021. |: CRC Press, 2021. http://dx.doi.org/10.1201/9781003050841-10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Moreira, Catarina, and Andreas Wichert. "Introducing Quantum-Like Influence Diagrams for Violations of the Sure Thing Principle." In Quantum Interaction, 91–108. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-35895-2_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lucero, Andrés. "Using Affinity Diagrams to Evaluate Interactive Prototypes." In Human-Computer Interaction – INTERACT 2015, 231–48. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-22668-2_19.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Geiger, Christian, Holger Reckter, Roman Dumitrescu, Sascha Kahl, and Jan Berssenbrügge. "A Zoomable User Interface for Presenting Hierarchical Diagrams on Large Screens." In Human-Computer Interaction. Novel Interaction Methods and Techniques, 791–800. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-02577-8_87.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Interaction diagrams"

1

Song, Il-Yeol. "A Heuristic for Developing Object Interaction Diagrams." In 2001 Informing Science Conference. Informing Science Institute, 2001. http://dx.doi.org/10.28945/2355.

Повний текст джерела
Анотація:
The UML (Unified Modeling Language) has been widely accepted as a standard language for object-oriented analysis and design. Among the UML diagrams, one of the most difficult and time-consuming diagrams to develop is the object interaction diagram (OID), which is rendered as either a sequence diagram or a collaboration diagram. Our experience shows that developers have significant trouble in understanding and developing OIDs. In this paper, we present an effective heuristic for developing interaction diagrams and illustrate the technique with a case study. We found that students effectively developed OIDs using this heuristic method.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Rees, Dylan, Robert S. Laramee, Paul Brookes, and Tony D'Cruze. "Interaction Techniques for Chord Diagrams." In 2020 24th International Conference Information Visualisation (IV). IEEE, 2020. http://dx.doi.org/10.1109/iv51561.2020.00015.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lano, K. "Formal Specification using Interaction Diagrams." In Fifth IEEE International Conference on Software Engineering and Formal Methods (SEFM 2007). IEEE, 2007. http://dx.doi.org/10.1109/sefm.2007.20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Rönnquist, Ralph, and Chi Keen Low. "Analysing expert assistants through interaction diagrams." In the first international conference. New York, New York, USA: ACM Press, 1997. http://dx.doi.org/10.1145/267658.267791.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Van den Bergh, Jan, and Karin Coninx. "CAP3 for interaction design pattern diagrams?" In the 2nd International Workshop. New York, New York, USA: ACM Press, 2011. http://dx.doi.org/10.1145/2018431.2018433.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ray, A., and R. Cleaveland. "Architectural interaction diagrams: AIDs for system modeling." In 25th International Conference on Software Engineering, 2003. Proceedings. IEEE, 2003. http://dx.doi.org/10.1109/icse.2003.1201218.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

"DETECTING ASPECTUAL BEHAVIOR IN UML INTERACTION DIAGRAMS." In 2nd International Conference on Software and Data Technologies. SciTePress - Science and and Technology Publications, 2007. http://dx.doi.org/10.5220/0001341203780386.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Vosough, Zana, Dietrich Kammer, Mandy Keck, and Rainer Groh. "Visualizing uncertainty in flow diagrams." In VINCI '17: 10th International Symposium on Visual Information Communication and Interaction. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3105971.3105972.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Machado, Patricia D. L., Jorge C. A. Figueiredo, Emerson F. A. Lima, Ana E. V. Barbosa, and Helton S. Lima. "Component-based integration testing from UML interaction diagrams." In 2007 IEEE International Conference on Systems, Man and Cybernetics. IEEE, 2007. http://dx.doi.org/10.1109/icsmc.2007.4414070.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Metatla, Oussama. "Workspace Awareness in Collaborative Audio-Only Interaction with Diagrams." In AfriCHI'16: African Conference for Human Computer Interaction. New York, NY, USA: ACM, 2016. http://dx.doi.org/10.1145/2998581.2998598.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Interaction diagrams"

1

Vakaliuk, Tetiana A., Olha V. Korotun, and Serhiy O. Semerikov. The selection of cloud services for ER-diagrams construction in IT specialists databases teaching. CEUR Workshop Proceedings, June 2021. http://dx.doi.org/10.31812/123456789/4371.

Повний текст джерела
Анотація:
One of the main aspects of studying databases in higher education institutions by future IT specialists is database design and software product development. This, in turn, is the most important problem of the developer’s interaction with the customer. To facilitate the process of database design, ER-diagrams are used, which are based on the concepts of “Entity” and “Relationship”. An ER diagram allows you to present a database in the form of visual graphical objects that define a specific subject area. The article considers the available cloud services for the construction of ER-diagrams for learning databases of future IT specialists and their selection the method expert evaluation. For this purpose, the criteria and indicators for the selection of cloud services for the construction of ER-diagrams of databases by future information technology specialists have been determined. As a result, it was found that the cloud services Dbdesigner.net and Lucidchart are the most convenient to learn. It is determined that for a teacher of a higher education institution the use of cloud services is an opportunity to use licensed software in education without additional costs.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fernando, P. U. Ashvin Iresh, Gilbert Kosgei, Matthew Glasscott, Garrett George, Erik Alberts, and Lee Moores. Boronic acid functionalized ferrocene derivatives towards fluoride sensing. Engineer Research and Development Center (U.S.), July 2022. http://dx.doi.org/10.21079/11681/44762.

Повний текст джерела
Анотація:
In this technical report (TR), a robust, readily synthesized molecule with a ferrocene core appended with one or two boronic acid moieties was designed, synthesized, and used toward F- (free fluoride) detection. Through Lewis acid-base interactions, the boronic acid derivatives are capable of binding with F- in an aqueous solution via ligand exchange reaction and is specific to fluoride ion. Fluoride binding to ferrocene causes significant changes in fluorescence or electrochemical responses that can be monitored with field-portable instrumentation at concentrations below the WHO recommended limit. The F- binding interaction was further monitored via proton nuclear magnetic resonance spectroscopy (1H-NMR). In addition, fluorescent spectroscopy of the boronic acid moiety and electrochemical monitoring of the ferrocene moiety will allow detection and estimation of F- concentration precisely in a solution matrix. The current work shows lower detection limit (LOD) of ~15 μM (285 μg/L) which is below the WHO standards. Preliminary computational calculations showed the boronic acid moieties attached to the ferrocene core interacted with the fluoride ion. Also, the ionization diagrams indicate the amides and the boronic acid groups can be ionized forming strong ionic interactions with fluoride ions in addition to hydrogen bonding interactions.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lutz, Carsten. Reasoning about Entity Relationship Diagrams with Complex Attribute Dependencies. Aachen University of Technology, 2002. http://dx.doi.org/10.25368/2022.119.

Повний текст джерела
Анотація:
Entity Relationship (ER) diagrams are among the most popular formalisms for the support of database design [7, 12, 17, 6]. Their classical use in the (usually computer aided) database design process can roughly be described as follows: after evaluating the requirements of the application, the database designer constructs an ER schema, which represents the conceptual model of the new database. CASE tools can be used to automatically transform the ER schema into a relational database schema, which is then manually fine-tuned. During the last years, the initially rather simple ER formalisms has been extended by various means of expressivity to account for new, more complex application areas such as schema integration for data warehouses [12, 3, 13]. Designing a conceptual model with such enriched ER diagrams is a nontrivial task: there exist complex interactions between the various means of expressivity, which quite often result in unnoticed inconsistencies in the ER schemas and in implicit ramifications of the modeling that have not been intended by the designer. To address this problem, Description Logics (DLs) have been proposed and succesfully used as a tool for reasoning about ER diagrams and thereby detecting the aforementioned anomalies [5, 6, 8].
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tsidylo, Ivan M., Serhiy O. Semerikov, Tetiana I. Gargula, Hanna V. Solonetska, Yaroslav P. Zamora, and Andrey V. Pikilnyak. Simulation of intellectual system for evaluation of multilevel test tasks on the basis of fuzzy logic. CEUR Workshop Proceedings, June 2021. http://dx.doi.org/10.31812/123456789/4370.

Повний текст джерела
Анотація:
The article describes the stages of modeling an intelligent system for evaluating multilevel test tasks based on fuzzy logic in the MATLAB application package, namely the Fuzzy Logic Toolbox. The analysis of existing approaches to fuzzy assessment of test methods, their advantages and disadvantages is given. The considered methods for assessing students are presented in the general case by two methods: using fuzzy sets and corresponding membership functions; fuzzy estimation method and generalized fuzzy estimation method. In the present work, the Sugeno production model is used as the closest to the natural language. This closeness allows for closer interaction with a subject area expert and build well-understood, easily interpreted inference systems. The structure of a fuzzy system, functions and mechanisms of model building are described. The system is presented in the form of a block diagram of fuzzy logical nodes and consists of four input variables, corresponding to the levels of knowledge assimilation and one initial one. The surface of the response of a fuzzy system reflects the dependence of the final grade on the level of difficulty of the task and the degree of correctness of the task. The structure and functions of the fuzzy system are indicated. The modeled in this way intelligent system for assessing multilevel test tasks based on fuzzy logic makes it possible to take into account the fuzzy characteristics of the test: the level of difficulty of the task, which can be assessed as “easy”, “average", “above average”, “difficult”; the degree of correctness of the task, which can be assessed as “correct”, “partially correct”, “rather correct”, “incorrect”; time allotted for the execution of a test task or test, which can be assessed as “short”, “medium”, “long”, “very long”; the percentage of correctly completed tasks, which can be assessed as “small”, “medium”, “large”, “very large”; the final mark for the test, which can be assessed as “poor”, “satisfactory”, “good”, “excellent”, which are included in the assessment. This approach ensures the maximum consideration of answers to questions of all levels of complexity by formulating a base of inference rules and selection of weighting coefficients when deriving the final estimate. The robustness of the system is achieved by using Gaussian membership functions. The testing of the controller on the test sample brings the functional suitability of the developed model.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Calculation of Interaction Diagrams for Precast, Prestressed Piles, 2nd Edition (PD-01-15). Precast/Prestressed Concrete Institute, 2015. http://dx.doi.org/10.15554/pd-01-15.

Повний текст джерела
Анотація:
This free eBook provides context and instructions for the use of the 2015 revised version of the Microsoft Excel workbook to compute pile stresses, plot interaction diagrams, and compute lifting points of precast concrete piles. There is no cost for downloading this publication. However, registration is required so that users can be contacted when updates or revisions to the workbook are necessary. The Appendix of this eBook contains detailed instruction and solved example problems using the 2015 workbook. Examples are also solved using Mathcad to validate the workbook solution, and a table of results compares the two methods. Page iv of this manual provides link to a password protected portal for software download.
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Interaction diagrams" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії