Relevant bibliographies by topics / Adhesive process

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Adhesive process'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Adhesive process.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Adhesive process"

1

Ruffatto, Donald, Aaron Parness, and Matthew Spenko. "Improving controllable adhesion on both rough and smooth surfaces with a hybrid electrostatic/gecko-like adhesive." Journal of The Royal Society Interface 11, no. 93 (2014): 20131089. http://dx.doi.org/10.1098/rsif.2013.1089.

Full text
Abstract:
This paper describes a novel, controllable adhesive that combines the benefits of electrostatic adhesives with gecko-like directional dry adhesives. When working in combination, the two technologies create a positive feedback cycle whose adhesion, depending on the surface type, is often greater than the sum of its parts. The directional dry adhesive brings the electrostatic adhesive closer to the surface, increasing its effect. Similarly, the electrostatic adhesion helps engage more of the directional dry adhesive fibrillar structures, particularly on rough surfaces. This paper presents the ne
APA, Harvard, Vancouver, ISO, and other styles
2

Xu, Xiaoyan, Jinchan Peng, Jianjiang Yang, et al. "Effects of high polyamic acid content and curing process on properties of epoxy resins." e-Polymers 22, no. 1 (2022): 301–8. http://dx.doi.org/10.1515/epoly-2022-0028.

Full text
Abstract:
Abstract Epoxy/polyamic acid (EP/PAA) adhesives with high polyimide precursor-PAA content have been synthesized and then cured. The structure, thermal, and adhesive properties were investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, and tensile shear test. The effects of PAA content and curing process on the tensile shear strength were also studied. The results showed that the addition of PAA improved the heat resistance and reduced the water absorption. EP/PAA adhesive kept good adhesion. A kind of EP/PAA composite adhesive with excellent comprehensive propert
APA, Harvard, Vancouver, ISO, and other styles
3

Antosik, Adrian Krzysztof, and Nataniel Adrian Antosik. "Effect of the addition of selected silicon fillers on Si- PSA shrinkage." Journal of Analytical & Pharmaceutical Research 10, no. 4 (2021): 157–59. http://dx.doi.org/10.15406/japlr.2021.10.00380.

Full text
Abstract:
The concept of shrinkage phenomenon is widely described in the available literature. With respect to pressure-sensitive adhesives (PSA) in general, the definition of shrinkage is understood to be "less than its original size" and is closely related to the crosslinking process and the effect of the crosslinker on the test adhesive. Shrinkage alongside adhesive properties (adhesion, tackiness) and mechanical (cohesion) is one of the most important characteristics of a self-adhesive adhesive. It is very important in terms of production when receiving, for example, decorative banners or self-adhes
APA, Harvard, Vancouver, ISO, and other styles
4

Ricca, Frederico, Francisco J. Galindo-Rosales, Alireza Akhavan-Safar, et al. "Predicting the Adhesive Layer Thickness in Hybrid Joints Involving Pre-Tensioned Bolts." Polymers 16, no. 16 (2024): 2284. http://dx.doi.org/10.3390/polym16162284.

Full text
Abstract:
While most academic studies focus on the properties of cured joints, this research addresses the manufacturing process of hybrid joints in their uncured state. Hybrid joints that combine adhesive bonding with pre-tensioned bolts exhibit superior mechanical performance compared to exclusively bonded or bolted joints. However, the adhesive flow during manufacturing in hybrid joints often results in a nonuniform adhesive thickness, where obtaining an exact thickness is crucial for accurate load capacity predictions. This paper presents experiments involving three different adhesives, providing pr
APA, Harvard, Vancouver, ISO, and other styles
5

Vuksanović, Marija, Nataša Tomić, Ivana Mladenović, Tamara Perić, Bojan Gligorijević, and Radmila Jančić-Heinemann. "Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles." Tehnika 75, no. 4 (2020): 429–33. http://dx.doi.org/10.5937/tehnika2004429v.

Full text
Abstract:
Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental technology. The role of reinforcement is to adjust the mechanical properties, but also to control the shrinkage during curing. As reinforcement, alumina particles doped with iron oxide (Al2O3 Fe) synthesized using the sol-gel technique were selected. In order to simulate the process of adhesive application in real conditions, in vitro testing technique and adhesion properties of s
APA, Harvard, Vancouver, ISO, and other styles
6

Czech, Zbigniew, Agnieszka Kowalczyk, Karolina Górka, Urszula Głuch, Lu Shao, and Jolanta Świderska. "Influence of the unsaturated photoinitiators kind on the properties of uv-crosslinkable acrylic pressure-sensitive adhesives." Polish Journal of Chemical Technology 14, no. 3 (2012): 83–87. http://dx.doi.org/10.2478/v10026-012-0089-y.

Full text
Abstract:
UV-crossinkable pressure-sensitive adhesives (PSA) materials are called, in the adhesives trade photoreactive self-adhesive. UV-crosslinkable PSAs are designed after the UV-initiated crosslinking reaction to stick to almost any surface by a simple contact under light pressure. This special class of adhesives does not undergo any physical transformation or chemical reaction during the bonding process. Because of the rheological properties the adhesive must be fi nely tuned for the application, combining a carefully chosen polymer architecture and monomer composition with the proper addition of
APA, Harvard, Vancouver, ISO, and other styles
7

Müller, Miroslav. "Experimental Research on Load Capacity, Treatment of Adhesively Bonded Surface and Failure Process of Structural T-joint." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 64, no. 2 (2016): 473–79. http://dx.doi.org/10.11118/actaun201664020473.

Full text
Abstract:
In this paper the mechanical behaviour of structural two-component epoxy adhesives in T-joints is experimentally investigated. The aim of this study is to analyse the impact of the adhesive bonded surface treatment on the maximum force required to cause destruction, i.e. bearing capacity of T-joints bonded with various adhesives. Experimental results showed that the type of the adhesive affected the limit values of a force required for the destruction of the adhesive bond. The effect of the bonded surface treatment was also confirmed. From the results of experiment it was proved on five tested
APA, Harvard, Vancouver, ISO, and other styles
8

Mengüç, Yiğit, Michael Röhrig, Uyiosa Abusomwan, Hendrik Hölscher, and Metin Sitti. "Staying sticky: contact self-cleaning of gecko-inspired adhesives." Journal of The Royal Society Interface 11, no. 94 (2014): 20131205. http://dx.doi.org/10.1098/rsif.2013.1205.

Full text
Abstract:
The exceptionally adhesive foot of the gecko remains clean in dirty environments by shedding contaminants with each step. Synthetic gecko-inspired adhesives have achieved similar attachment strengths to the gecko on smooth surfaces, but the process of contact self-cleaning has yet to be effectively demonstrated. Here, we present the first gecko-inspired adhesive that has matched both the attachment strength and the contact self-cleaning performance of the gecko's foot on a smooth surface. Contact self-cleaning experiments were performed with three different sizes of mushroom-shaped elastomer m
APA, Harvard, Vancouver, ISO, and other styles
9

Kuo, Chung-Feng Jeffrey, Wei Lun Lan, Jui-Wen Wang, John-Ber Chen, and Pin-Hua Lin. "Hot-melt pressure-sensitive adhesive for seamless bonding of nylon fabric Part II: Process parameter optimization for seamless bonding of nylon fabric." Textile Research Journal 89, no. 12 (2018): 2294–304. http://dx.doi.org/10.1177/0040517518790970.

Full text
Abstract:
This study develops hot melt pressure sensitive adhesives (HMPSAs) for the seamless bonding of nylon fabric, using butyl acrylate as the main monomer material and mixing the functional monomer for polymerization. It is combined with 2-10phr diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide for the photoinitiator and ultraviolet irradiation is used to make a pre-polymer. The effects of butyl acrylate content, type of functional monomer, and 2-10phr diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide content on the molecular weight of acrylate pre-polymer are discussed, following the Taguchi metho
APA, Harvard, Vancouver, ISO, and other styles
10

Yao, Xingfang, Hongli Liu, and Congcong Li. "Development of Eco-Friendly Soy Meal Adhesives Enhanced by Ethylene Glycol Diglycidyl Ether." Advances in Polymer Technology 2019 (June 9, 2019): 1–7. http://dx.doi.org/10.1155/2019/8697047.

Full text
Abstract:
The ethylene glycol diglycidyl ether (EGDE) as a viscosity reducer, plasticizing agent, and crosslinking agent was introduced into the adhesive system to improve the properties of the soy-based adhesive. The adhesive properties including viscosity, solid content, and shear adhesion of soy protein adhesive were measured. The morphology, infrared spectra, and crystallinity of the cured adhesives were evaluated with scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and X-ray diffraction (XRD). The results showed that the viscosity of soybean flour (SF) adhesive was reduced by
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Adhesive process"

1

PEREZ, EDUARDO DE BRITTO. "OPTIMIZATION OF DRYING PROCESS IN THE MANUFACTURING OF ADHESIVE TAPES." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2004. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=4981@1.

Full text
Abstract:
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>O processo de manufatura de fitas adesivas geralmente envolve uma etapa de retirada dos solventes presentes na solução revestida e formação de uma camada de material semi- sólido sobre um substrato impermeável. Devido a alta espessura de adesivo requerida no produto final e a alta concentração de solventes característica da solução revestida, a secagem se torna, muitas vezes, o gargalo do processo produtivo. Ganhos de produtividade em linhas que podem produzir centenas de milhares de metros quadrados de fita adesiva por mê
APA, Harvard, Vancouver, ISO, and other styles
2

Kostiuk, Tyler. "Employee risk due to ergonomic exposure during adhesive application process." Online version, 2008. http://www.uwstout.edu/lib/thesis/2008/2008kostiukt.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Пак, Василь Якович, Василий Яковлевич Пак, Vasyl Yakovych Pak та Н. О. Панько. "Оцінка симптомів спайкового синдрому, як фактор діагностики". Thesis, Видавництво СумДУ, 2004. http://essuir.sumdu.edu.ua/handle/123456789/9455.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tran, Binh. "An Adhesive Vinyl-Acrylic Electrolyte and Electrode Binder for Lithium Batteries." Doctoral diss., University of Central Florida, 2013. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5711.

Full text
Abstract:
This dissertation describes a new vinyl-acrylic copolymer that displays great potential for applications in lithium ion batteries by enabling novel, faster, safer and cost-effective processes. Understanding the chemistry of materials and processes related to battery manufacturing allows the design of techniques and methods that can ultimately improve the performance of existing batteries while reducing the cost. The first and second parts of this dissertation focuses on the free radical polymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMA), methyl methacrylate (MMA), and
APA, Harvard, Vancouver, ISO, and other styles
5

Reyda, Caitlin J. (Caitlin Jilaine). "Development of adhesive bonding and functional testing systems for in-process inspection of hot embossed microfluidic devices." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/87792.

Full text
Abstract:
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 153-155).<br>Microfluidics has emerged as an increasingly popular field with a wide-variety of applications such as medical diagnostics, drug development, and DNA analysis. The transition of microfluidic devices from research to industry has stimul
APA, Harvard, Vancouver, ISO, and other styles
6

França, Morgana Cristina. "Produção de painéis aglomerados de fibras oversize de uma indústria de mdf." Universidade do Estado de Santa Catarina, 2015. http://tede.udesc.br/handle/handle/1949.

Full text
Abstract:
Made available in DSpace on 2016-12-12T20:12:31Z (GMT). No. of bitstreams: 1 PGEF15MA038.pdf: 1166149 bytes, checksum: 62e4bee997f4feef09f74999ed38e83d (MD5) Previous issue date: 2015-02-06<br>The motivation for the development of this study was the use of an oversize fibers MDF company that had already incorporated resin and paraffin in its structure, for the manufacture of a new product. As a result it would reduce the emission of gases (formaldehyde), because when the raw material is discarded, it can be used .Thus, the objective of this study was to evaluate the technical feasibility of
APA, Harvard, Vancouver, ISO, and other styles
7

Ramkumar, S. Manian. "Process analysis and performance characterization of a novel anisotropic conductive adhesive for lead-free surface mount electronics assembly." Diss., Online access via UMI:, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Almulhim, Khalid. "Effect of resin cement, aging process and root level on the bond strength of the resin-fiber posts." Thesis, NSUWorks, 2014. https://nsuworks.nova.edu/hpd_cdm_stuetd/16.

Full text
Abstract:
Background . Little is known about the long-term clinical bonding effectiveness of the Fiber-reinforced composite (FRC) posts cemented with self-etch adhesive systems. Bond stability and longevity of the cemented post are adversely affected by physical and chemical factors over time, such as expansion and contraction stresses caused by thermal changes and occlusal load. This clinical condition can be simulated in vitro by thermocyclic loading; and bonding effectiveness can be evaluated by applying the micropush out test. Therefore, more in vitro studies are needed to evaluate the bond strength
APA, Harvard, Vancouver, ISO, and other styles
9

Wojtewicz, Michał. "Research on the influence of grinding wheel impregnation with anti-adhesive substances on the efficiency of nickel based alloys grinding process : PhD thesis summary." Rozprawa doktorska, [s.n.], 2017. http://dlibra.tu.koszalin.pl/Content/1049.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Prautzsch, Volker. "Entwicklung transparent geklebter Glas-Rahmenecken und Untersuchung des Tragverhaltens." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-181151.

Full text
Abstract:
Im Konstruktiven Glasbau ist es keine Besonderheit mehr, Glasträger für Dachkonstruktionen und Glasschwerter in Fassaden einzusetzen, um leichte, transparente und in den Hintergrund tretende Tragkonstruktionen umzusetzen. Für die Fügung dieser tragenden Bauteile werden bisher Verbindungsmittel aus Edelstahl eingesetzt, die optisch beeinträchtigen, Bohrungen im Glas erfordern und ungünstige Spannungsspitzen im Glas hervorrufen. Demgegenüber ist das Kleben für den spröden Werkstoff Glas ein materialgerechteres Fügeverfahren. Die Untersuchung einer flächigen Klebverbindung zum Lastabtrag zwischen
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Adhesive process"

1

Oosting, Richard. Toward a new durable and environmentally compliant adhesive bonding process for aluminium alloys. Delft University Press, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hahn, H. J. Method for the production of strongly adhesive metal films on titanium and titanium alloys with a metallization process [microform]. National Aeronautics and Space Administration, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hahn, H. J. Method for the production of strongly adhesive metal films on titanium and titanium alloys with a metallization process [microform]. National Aeronautics and Space Administration, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Great Britain. Museum and Galleries Commission. Conservation Unit., ed. Adhesives and coatings. Conservation Unit of the Museums & Galleries Commission in conjunction with Routledge, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing (4th 2000 Espoo, Finland). 4th International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing ; proceedings: Presented at Adhesives in Electronics 2000, Espoo, Finland, June 18-21, 2000. Edited by Kivilahti Jorma, Hyytiäinen Marika, Nokia (Firm), and Adhesives 2000 (2000 : Espoo, Finland). IEEE, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

E, Jones Gareth, Wigley C. B, Warn Richard, and Society for Experimental Biology (Great Britain), eds. Cell behaviour: Adhesion and motility. Published for the Society for Experimental Biology by the Company of Biologists Limited, Department of Zoology, University of Cambridge, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

United States International Trade Commission. In the matter of certain microsphere adhesives, process for making same, and products containing same, including self-stick repositionable notes. U.S. International Trade Commission, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Institute, Library Binding, ed. Long-term service life and performance characteristics of the PVA cold emulsion adhesives used for the double fanning process in library binding: Are PUR adhesives a viable alternative? Library Binding Institute, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Veiga, Enrique C. López. El Proceso de adhesion de España a la Comunidad Económica Europea en la pesca. Servicio de Publicaciones de la Caja de Ahorros Municipal de Vigo, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Blunt, F. J. Effect of surface preparation on adhesion of alumina coatings sprayed using the high velocity oxyfuel process. TWI, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Adhesive process"

1

Louisa Krüger, Mirja, and Kirsten Tracht. "Analysis of Surface Properties for Process-Reliable Handling with Dry-Adhesive Microstructures." In Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2023. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-74010-7_12.

Full text
Abstract:
Abstract The aim of this paper is to investigate the influence of different surface parameters on the adhesion behavior of dry-adhesive microstructures. Selective laser melting surfaces, which are partly reworked in a solid rolling process, are used to investigate the influence of different surface parameters. The surface parameters are determined using a laser scanning microscope. Experiments with three different test masses and dry-adhesive microstructures are carried out on the surfaces to determine the pull-off stress. The experiments show that the surface parameter root-means-square rough
APA, Harvard, Vancouver, ISO, and other styles
2

Terasaki, Nao. "Direct Visualization of Mechanical Behavior During Adhesive Bonding Failure Using Mechanoluminescence (ML)." In Interfacial Phenomena in Adhesion and Adhesive Bonding. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-4456-9_4.

Full text
Abstract:
AbstractIn this chapter, we introduce recent progress in direct visualization of mechanical behavior in the failure process of adhesive bonding by mechanoluminescence (ML). Firstly, basic mechanoluminescence technologies are introduced in terms of materials, sensors, sensing technologies in Sects. 1 and 2. Then, for considering effective application of ML sensing that takes advantage of technological features, (Sect. 3) structural health monitoring (SHM)/Conditioning based monitoring (CBM), and (Sect. 4) innovation in design and prediction are discussed from the viewpoint of visualizing mechan
APA, Harvard, Vancouver, ISO, and other styles
3

Noeske, Michael, Welchy Leite Cavalcanti, Hauke Brüning, et al. "Introduction to Recent Advances in Quality Assessment for Adhesive Bonding Technology." In Adhesive Bonding of Aircraft Composite Structures. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-92810-4_1.

Full text
Abstract:
AbstractThe first chapter highlights the relevance of both adhesive bonding technology and in-process quality assessment for mastering twenty-first-century challenges in joining functional and lightweight materials like carbon fibre reinforced polymers. The ongoing developments of the relevant technological and regulatory procedures and frameworks are hereby outlined, following trends for data-driven innovation and standardisation. Advances from monitoring process variables towards the in-depth and objective Extended Non-destructive Testing (ENDT) of material-related features are presented, ba
APA, Harvard, Vancouver, ISO, and other styles
4

Gandhi, Aanchal, Hari Vasudevan, and Rajendra Khavekar. "Improvement of Quality in Adhesive Mass Coating Process Using Statistical Process Control." In Proceedings of International Conference on Intelligent Manufacturing and Automation. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7971-2_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Leite Cavalcanti, Welchy, Elli Moutsompegka, Konstantinos Tserpes, et al. "Integrating Extended Non-destructive Testing in the Life Cycle Management of Bonded Products—Some Perspectives." In Adhesive Bonding of Aircraft Composite Structures. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-92810-4_6.

Full text
Abstract:
AbstractIn this chapter, we outline some perspectives on embracing the datasets gathered using Extended Non-destructive Testing (ENDT) during manufacturing or repair process steps within the life cycle of bonded products. Ensuring that the ENDT data and metadata are FAIR, i.e. findable, accessible, interoperable and re-usable, will support the relevant stakeholders in exploiting the contained material-related information far beyond a stop/go decision, while a shorter time-to-information will facilitate a prompter time-to-decision in process and product management. Exploiting the value of ENDT
APA, Harvard, Vancouver, ISO, and other styles
6

von Freeden, Justus, Jesper de Wit, Stefan Caba, et al. "Composite Repair and Remanufacturing." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_10.

Full text
Abstract:
AbstractFor the reuse of components and structures made of fiber composite materials, a complete remanufacturing process chain is necessary to prepare the parts for a further life cycle. The first step is to dismantle the parts to be reused. Fiber composite components are mostly joined using adhesive technology, so that solution techniques are required for adhesive connections. One possibility is the separation of the adhesive layer by means of thermally expanding particles. Adhesive residues are removed by laser so that the components can be glued again after reprocessing. The decisive factor
APA, Harvard, Vancouver, ISO, and other styles
7

Palacios, Carlo, Osman Gradiz, and Chien-Yi Huang. "The Parametric Design of Adhesive Dispensing Process with Multiple Quality Characteristics." In Proceedings of the Institute of Industrial Engineers Asian Conference 2013. Springer Singapore, 2013. http://dx.doi.org/10.1007/978-981-4451-98-7_109.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jeong, G. C., Il Ho Kim, and S. I. Kwun. "Influence of Process Parameters on the Adhesive Strength of CrN Coatings." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-431-6.367.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Morales-Hernández, Alejandro, Inneke Van Nieuwenhuyse, Sebastian Rojas Gonzalez, Jeroen Jordens, Maarten Witters, and Bart Van Doninck. "Multi-objective Optimization of Adhesive Bonding Process in Constrained and Noisy Settings." In Communications in Computer and Information Science. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-34020-8_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kondratiev, Andrii, Sergiy Melnikov, Tetyana Nabokina, and Anton Tsaritsynskyi. "Optimization of Parameters for the Printing Process of Adhesive Application in Honeycomb Core Manufacturing." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-85057-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Adhesive process"

1

Li, Yufei, Nanyan Shen, and Jing Li. "Simulation analysis and quality modeling research on the adhesive process of wrapping paper joints." In 4th International Conference on Electronic Information Engineering and Data Processing (EIEDP 2025), edited by Azlan Bin Mohd Zain and Lei Chen. SPIE, 2025. https://doi.org/10.1117/12.3066953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dempster, W. A., and W. H. Seager. "The Gasket Effect Principle." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91354.

Full text
Abstract:
Abstract Superior performance characteristics of polyethylene tape coatings are insured when tension is applied to the tape during the wrapping process on pipe. The tangential force applied during the wrapping process creates an inward radial force, compressing the adhesive layer between the steel pipe surface and the polyethylene tape backing creating a gasket effect. Field and laboratory data show this gasket effect to influence cathodic disbondment, adhesion, and water absorption characteristics of polyethylene tape coatings.
APA, Harvard, Vancouver, ISO, and other styles
3

Verdino, Joseph, Simon Hind, Drazen Djokic, and Ali Yousefpour. "Conuduction Heating for Adhesive Bonding of Rotorcraft Primary Structure." In Vertical Flight Society 70th Annual Forum & Technology Display. The Vertical Flight Society, 2014. http://dx.doi.org/10.4050/f-0070-2014-9559.

Full text
Abstract:
A final stage in the manufacturing of a rotorcraft structural article is presented. A single-part composite skin is stiffened with a series of pre-cured composite frames. Legacy designs feature either mechanically fastened metallic skin and frames, or longitudinally split composite skin bonded and fastened to composite frames. In the new design, all frames are simultaneously bonded using a high-performance, thermally-activated film adhesive. No fasteners are used. This approach improved the load transfer, damage tolerance, and part count. The success of this complex bonding operation is highly
APA, Harvard, Vancouver, ISO, and other styles
4

Semerad, V. A. W., F. A. Corsiglia, D. Weaver, and G. Cox. "Testing of Epoxy Adhesives for a Splash-Zone Coating Retrofit System for Marine Pipeline Riser Applications." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03042.

Full text
Abstract:
Abstract In the 1992/96 Joint Industry Project test program an epoxy adhesive was qualified, which was applicable and curable under water. However, it used a curative, which contained a man-made chemical called MDA (4,4' methylenedianiline). The MDA-containing curative was shown to be carcinogenic and was later withdrawn from the market. After removal of the MDA and reformulation, application and performance properties of epoxies for underwater application and curing were significantly affected. Since the reformulated epoxy adhesives did not meet the properties of the original (MDA-containing)
APA, Harvard, Vancouver, ISO, and other styles
5

Sherehiy, Andriy, Andres Montenegro, Danming Wei, and Dan O. Popa. "Adhesive Deposition Process Characterization for Microstructure Assembly." In ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63929.

Full text
Abstract:
Abstract Recent advancements in additive manufacturing such as Direct Write Inkjet printing introduced novel tools that allow controlled and precise deposition of fluid in nano-liter volumes, enabling fabrication of multiscale structures with submillimeter dimensions. Applications include fabrication of flexible electronics, sensors, and assembly of Micro-Electro-Mechanical Systems (MEMS). Critical challenges remain in the control of fluid deposition parameters during Inkjet printing to meet specific dimensional footprints at the microscale necessary for the assembly process of microscale stru
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Chi. "Adhesive Rheology and Dispensing Process Analysis." In International Congress & Exposition. SAE International, 1993. http://dx.doi.org/10.4271/930334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wu, Xin, Hongqi Hao, Guohua Zhang, Cindy Renault, and Dale Frendberg. "Variation in Autobody Adhesive Curing Process." In International Congress & Exposition. SAE International, 1999. http://dx.doi.org/10.4271/1999-01-0997.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dileepa, K. D. R., K. A. Uresh, and S. V. Udayakumara. "Development of a new bio-based adhesive for cardboard using latex of pterocarpus indicus." In Engineering Research Unit Symposium 2023. Engineering Research Unit, 2023. http://dx.doi.org/10.31705/eru.2023.5.

Full text
Abstract:
Bio-based adhesives are derived from renewable resources such as plant-based materials, animal by-products, and microbial sources. Latex-based bio adhesives, specifically those made from natural latex derived from plant sources, have garnered significant research interest. While natural rubber remains the most commonly used bio source for latex adhesives, this study explores the potential of Pterocarpus indicus wild (PIW) latex as an alternative and discusses modifications that can be made to enhance its adhesive properties. Additionally, this research examines the effect of additives such as
APA, Harvard, Vancouver, ISO, and other styles
9

Kubozono, Tatsuya, Yutaka Moroishi, Yoshio Ohta, Hideaki Shimodan, and Noboru Moriuchi. "New process for resist removal after lithography process using adhesive tape." In SPIE's 1996 International Symposium on Microlithography, edited by Roderick R. Kunz. SPIE, 1996. http://dx.doi.org/10.1117/12.241866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Papyrin, A. N., S. V. Klinkov, and V. F. Kosarev. "Modeling of Particle-Substrate Adhesive Interaction Under the Cold Spray Process." In ITSC2003, edited by Basil R. Marple and Christian Moreau. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.itsc2003p0027.

Full text
Abstract:
Abstract This paper presents some results of modelling of the adhesive interaction of solid particles with the substrate at collision parameters characteristic for the Cold Spray process. A simple physical model based on comparison of adhesion energy and energy of elastic deformation generated under the particle impact is suggested. Empirical expressions for energies of adhesion and elastic deformation are obtained. It is shown that there is an optimal range of particle size and velocity providing high deposition efficiency for a given particle material. The results of the modeling are in good
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Adhesive process"

1

EMERSON, JOHN A., TOMMY R. GUESS, CAROL L. JONES ADKINS, et al. Investigation of the impact of cleaning on the adhesive bond and the process implications. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/754396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vega-Araújo, José, and Miquel Muñoz Cabré. Creating local value: renewable energy auctions in Colombia. Stockholm Environment Institute, 2025. https://doi.org/10.51414/sei2025.027.

Full text
Abstract:
This working paper examines how Colombia’s renewable energy auctions can foster a just and inclusive energy transition by integrating socio‑economic and community‑driven objectives. We propose two complementary pathways: (1) enhancing large‑scale project benefit sharing and community engagement, through strengthened qualification requirements and multicriteria award mechanisms, and (2) scaling up energy communities by reserving auction quotas via an adhesion process and establishing a dedicated support agency. These pathways offer a unique chance to embed non‑price indicators – such as socio‑e
APA, Harvard, Vancouver, ISO, and other styles
3

Rakesh Gupta. Energy Efficienct Processes for Making Tackifier Dispersions used to make Pressure Sensitive Adhesives. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/918086.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bruce. L52273 Internal Repair of Pipelines. Pipeline Research Council International, Inc. (PRCI), 2005. http://dx.doi.org/10.55274/r0010287.

Full text
Abstract:
External, corrosion-caused loss of wall thickness is the most common cause of repair for gas transmission pipelines. To prevent an area of corrosion damage from causing a pipeline to rupture, the area containing the corrosion damage must be reinforced. Since corrosion is a time dependent process, as pipelines become older, more repairs are required. Repair methods that can be applied from the inside of a gas transmission pipeline (i.e., trenchless methods) are an attractive alternative to conventional repair methods since pipeline excavation is precluded. This is particularly true for pipeline
APA, Harvard, Vancouver, ISO, and other styles
5

Suarez Loor, J., M. Lazo, A. Rigail, E. Adrian, and J. Vera. Processing of thermoplastic elastomers (TPE) by in-situ ground tire rubber (GTR) vulcanization using waste ethylene-vinyl-acetate (wEVA) and dicumyl peroxide (DCP). Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.re.2.

Full text
Abstract:
Tire rubber waste (TRW) is a complex mixture of materials, such as rubbers, steel, textile fibers, carbon black, and other additives. Its polluting capacity is a severe environmental problem, especially in landfills and waste management processes. As a practical solution to mitigate TRW’s environmental impact, thermoplastic elastomers (TPE) commonly reuse the ground tire rubber (GTR). This work presents an in-situ devulcanization of ground tire rubber (DGTR) and re-vulcanization of devulcanized ground tire rubber using dicumyl peroxide (DCP) and waste ethylene-vinyl-acetate (wEVA). The GTR was
APA, Harvard, Vancouver, ISO, and other styles
6

Wongkasemjit, Sujitra. Comparison of titanium dioxide/silicon dioxide/zirconium dioxide synthesized via sol-gel process to be used as lens protection : final report. Chulalongkorn University, 2004. https://doi.org/10.58837/chula.res.2004.97.

Full text
Abstract:
Many hard coating materials have been developed and based on the use of metal alkoxide or organosiloxanes prepared via the sol-gel process. Titanium glycolate, zirconium glycolate and silatrane precursors were processed as hard coating materials for polyurethane lens. These precursors are inexpensive and the preparation reaction is simple and straightforward. The effects of the sol-gel process parameters, viz, the type of precursors, the coupling agent (GPTS), and the curing agent (3-APS) were investigated. The surface property evaluation of ophthalmic lens was conducted with respect to the sc
APA, Harvard, Vancouver, ISO, and other styles
7

Morrison, Mark, and Joshuah Miron. Molecular-Based Analysis of Cellulose Binding Proteins Involved with Adherence to Cellulose by Ruminococcus albus. United States Department of Agriculture, 2000. http://dx.doi.org/10.32747/2000.7695844.bard.

Full text
Abstract:
At the beginning of this project, it was clear that R. albus adhered tightly to cellulose and its efficient degradation of this polysaccharide was dependent on micromolar concentrations of phenylacetic acid (PAA) and phenylpropionic acid (PPA). The objectives for our research were: i) to identify how many different kinds of cellulose binding proteins are produced by Ruminococcus albus; ii) to isolate and clone the genes encoding some of these proteins from the same bacterium; iii) to determine where these various proteins were located and; iv) quantify the relative importance of these proteins
APA, Harvard, Vancouver, ISO, and other styles
8

Abreu, Sergio, and Lincoln Bizzozero. Los países pequeños: Su rol en los procesos de integración. Inter-American Development Bank, 2000. http://dx.doi.org/10.18235/0009682.

Full text
Abstract:
Las cuestiones referidas a la adhesión de los países de menor dimensión a los programas de integración han sido objeto de discusión, análisis y acuerdos, desde sus inicios en diversas partes del mundo. Esas cuestiones han tenido, y tienen, distintas facetas. Una, referida a los resultados del respectivo proceso para cada uno de los países intervinientes que, por razones entendibles, revisten especial significado para los de menor dimensión. La literatura de la integración se ha ocupado extensamente de este tema con referencia a programas de integración encarados en diversos ámbitos geográficos
APA, Harvard, Vancouver, ISO, and other styles
9

Blohowiak, Kay Y., Jacob W. Grob, and Jill E. Seebergh. Air Vehicle Technology Integration Program (AVTIP). Delivery Order 0033: Advanced Sol-Gel Adhesion Processes - Transition Support. Defense Technical Information Center, 2005. http://dx.doi.org/10.21236/ada447980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hsia, K. Jimmy, Arne J. Pearlstein, Alexander Scheeline, and Jian Ku Shang. Oxide film microstructure: the link between surface preparation processes and strength/durability of adhesively bonded aluminum. Final report. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/771280.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Adhesive process' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography