Relevant bibliographies by topics / Aluminium profile

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Aluminium profile'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aluminium profile.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aluminium profile"

1

Pietzka, Daniel, Nooman Ben Khalifa, Stephanie Gerke, and A. Erman Tekkaya. "Composite Extrusion of Thin Aluminum Profiles with High Reinforcing Volume." Key Engineering Materials 554-557 (June 2013): 801–8. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.801.

Full text
Abstract:
Extruded aluminium profiles with a variety of different cross-sections are mainly used in lightweight structures for transportation means. Examples are stringer profiles in the fuselage of airplanes or profiles in chassis of trains and cars. Nowadays, the mass reduction of a lightweight structure is an important issue to achieve lower fuel consumption and CO2 emissions. With an increased portion of aluminium profiles the mass of structures can be reduced considerably in contrast to the application of steel parts, due to the lower density of aluminium. However, this is coupled with disadvantage
APA, Harvard, Vancouver, ISO, and other styles
2

Gebauer, Marek, Tomáš Brzobohatý, Tomáš Blejchař, and Tomáš Karásek. "Numerical Simulation of Heat Treatment Process of Aluminium Profiles." Strojnícky časopis - Journal of Mechanical Engineering 69, no. 3 (2019): 43–50. http://dx.doi.org/10.2478/scjme-2019-0028.

Full text
Abstract:
AbstractThe paper deals with the simulation of cooling processes of the aluminium profiles inside the water quench. Cooling of profile surfaces is performed by water spray, which is created by mixing a water and an air in a nozzles. Formulas were found in literature, modified and applied to a given problem that significantly simplified a solution. The task of numerical simulations was to determine temperature and velocity profile on aluminium profile surfaces for establishing of the heat transfer coefficient which was used as the convective boundary condition necessary to solve the heat transf
APA, Harvard, Vancouver, ISO, and other styles
3

Vyas, Vimal, Yogesh Chandra Sharma, Vinod Purvia, et al. "Compton Profile Study of Aluminium Nitride." Zeitschrift für Naturforschung A 62, no. 12 (2007): 703–10. http://dx.doi.org/10.1515/zna-2007-1205.

Full text
Abstract:
In this paper we report the ab-initio theoretical Compton profiles of aluminium nitride (AlN) in the framework of the Hartree-Fock, density functional theory and hybridization of Hartree-Fock to density functional theories using the CRYSTAL03 code. To compare our first ever theoretical data, we have also measured the isotropic Compton profile of AlN, using 59.54 keV γ -rays. The Hartree- Fock scheme-based Compton profile agrees better with the experiment than the other theories. The energy bands, density of states and Mulliken’s population analysis, using the CRYSTAL03 code, are also reported.
APA, Harvard, Vancouver, ISO, and other styles
4

Rusin, Dawid, Janusz Juraszek, and Piotr Woźniczka. "Experimental Determination of the Equivalent Moment of Inertia and Stresses of Aluminium Profiles with Thermal Breaks." Materials 18, no. 1 (2024): 23. https://doi.org/10.3390/ma18010023.

Full text
Abstract:
This paper presents the results of experimental tests and computer simulations on the stiffness of composite aluminium mullions used in unitised façades. The elements analysed were subjected to bending in order to simulate the actual operating conditions of aluminium façades subjected to significant wind pressure or suction loads. The basic mechanical and physical properties of the materials from which the analysed type of aluminium façade is made (Aluminium EN AW-6060 in the T66 temper and polyamide PA66 25GF), the test method, and the results obtained are described. As a result of the tests,
APA, Harvard, Vancouver, ISO, and other styles
5

Yadwinder Pal Sharma and Pardeep Kumar. "Effect of Welding Parameters on The Properties of Aluminium Alloys 6063 and 6101 Welded with Friction Stir Welding." Asian Review of Mechanical Engineering 3, no. 2 (2014): 43–47. http://dx.doi.org/10.51983/arme-2014.3.2.2379.

Full text
Abstract:
Friction stir welding (FSW) has got wide attraction in aerospace and automobile industries, as conventional fusion welding techniques are susceptible to various welding defects like cracks and porosity, Welding of aluminum alloys were also a matter of concern because of the thin oxide layer formation on the surface of alloys as this oxide layer tends to thicken at higher temperatures. Friction stir welding process shows several advantages to weld aluminum alloys. In the present research the optimization of the mechanical properties of welded joint of aluminum alloy of 6000 series are considere
APA, Harvard, Vancouver, ISO, and other styles
6

Sorgente, Donato, and Luigi Tricarico. "Pressure Profile Optimization on a Superplastic Aluminium Alloy." Materials Science Forum 735 (December 2012): 383–94. http://dx.doi.org/10.4028/www.scientific.net/msf.735.383.

Full text
Abstract:
In this work authors present a study of the influence of the pressure profile on forming time and on post-forming characteristics of superplastically formed parts. Material parameters of an aluminium superplastic alloy (ALNOVI-U) were estimated on the basis of experimental tests and of a numerical approach. A numerical model of the forming process was then created and used for evaluating the pressure profile able to keep the maximum strain rate value close to a target value. Pressure profiles were calculated using a strain rate control algorithm, firstly following a conventional approach and m
APA, Harvard, Vancouver, ISO, and other styles
7

Palanivel, R., P. Koshy Mathews, M. Balakrishnan, I. Dinaharan, and N. Murugan. "Effect of Tool pin Profile and Axial Force on Tensile Behavior in Friction Stir Welding of Dissimilar Aluminum Alloys." Advanced Materials Research 415-417 (December 2011): 1140–46. http://dx.doi.org/10.4028/www.scientific.net/amr.415-417.1140.

Full text
Abstract:
Aluminium alloys generally has low weldability by traditional fusion welding process. The development of the Friction Stir Welding (FSW) has provided an alternative improved way of producing aluminium joints, in a faster and reliable manner. FSW process has several advantages, in particular the possibility to weld dissimilar aluminium alloys. This study focuses on the behavior of tensile strength of dissimilar joints of AA6351-T6 alloy to AA5083-H111 alloy produced by friction stir welding was analysed. Five different tool pin profile such as Straight Square (SS), Tapered Square (TS), Straight
APA, Harvard, Vancouver, ISO, and other styles
8

Qinggui, Chen, Cai Xijie, Shi Rihua, Wang Qimin, and Lu Dongyuan. "Aluminium autodoping profile of SOS films." Materials Letters 3, no. 9-10 (1985): 372–74. http://dx.doi.org/10.1016/0167-577x(85)90079-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marthinsen, Knut, Jesper Friis, Bjørn Holmedal, Inge Skauvik, and Trond Furu. "Modelling the Recrystallization Behaviour during Industrial Processing of Aluminium Alloys." Materials Science Forum 715-716 (April 2012): 543–48. http://dx.doi.org/10.4028/www.scientific.net/msf.715-716.543.

Full text
Abstract:
The microstructure evolution in commercial AlMgSi alloys during and after extrusion of a simple U-shaped profile has been modelled. The strain, strain rate and temperature along a set of particle paths are taken from FE-HyperXtrude simulations and used as input to the work hardening model ALFLOW, to predict the evolution of the subgrain size and dislocation density during deformation. As soon as the profile leaves the die, the subsequent recovery and recrystallization behaviour is modelled with the softening model ALSOFT. This procedure enables the modelling of recrystallization profiles, i.e.
APA, Harvard, Vancouver, ISO, and other styles
10

Widyantoro, Murwan. "Analisis Penyebab Cacat Cekung Profil Aluminium Bangladesh Window Dengan Metode FMEA." Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi 7, no. 1 (2021): 1. http://dx.doi.org/10.35308/jmkn.v7i1.3555.

Full text
Abstract:
Quality control is a necessary requirement to keep the business running. By maintaining product quality there will be continuous business. PT.XYZ is a company engaged in manufacturing aluminum products. One of the products produced is the Bangladesh aluminum window profile. Currently, the production of Bangladesh window aluminum profiles is still often defective. This study aims to determine the root cause of the failure that occurred in the Bangladesh window aluminum profile product. The number of defects that occur is on the concave surface type with the results of the analysis using fish bo
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Aluminium profile"

1

Trigoulet, Nicolas. "Probing barrier-type anodic alumina films on nano-patterned substrates." Thesis, University of Manchester, 2010. https://www.research.manchester.ac.uk/portal/en/theses/probing-barriertype-anodic-alumina-films-on-nanopatterned-substrates(7c888ffd-f901-4993-b30d-05fc0a3bf514).html.

Full text
Abstract:
The growth of barrier-type anodic alumina films formed by anodizing relatively rough substrates has been shown to proceed by high field ionic conduction. As a result of the ionic transport and the induced plasticity, smoothing of the oxide surfaces and the metal/oxide interfaces arises. However, such a smoothing model was deduced from topographical observations and, therefore little insight was gained about the transport mechanism leading to the flattening of the anodized specimens. Recently, the development of porous anodic alumina has been demonstrated to proceed by coupled ionic migration a
APA, Harvard, Vancouver, ISO, and other styles
2

Ong, Lay Im. "Investigations into profile ring rolling of aluminium alloy bicycle wheel rims through experiments and numerical process simulations." Thesis, Brunel University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Franzén, Sebastian, and Martin Ramstedt. "Dimensionering av ett verktygslöst profilsystem för solpaneler." Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-52932.

Full text
Abstract:
Arbetet dimensionerar ett panelsystem för att motstå yttre påfrestningar som snö och vind, samtidigt som att det ska erbjuda oförstörande av- och påmontering. Hållfasthetsberäkningar har utförts med hjälp av statiska balkfall. Dimensionering av spår, snäppfunktion och låsningar i profilsystemet har utförts. Konstruktionsritningar har utförts, baserade på dimensionering och standarder. Med hjälp av detta arbete går det att tillverka detta system, åtminstone i ett prototypstadie.<br>This work dimensions a panel system to withstand external loads such as snow and wind, while it will offer non-des
APA, Harvard, Vancouver, ISO, and other styles
4

Hammarbäck, Hampus, and Fredric Ericsson. "Utveckling och konstruktion av belysningsarmatur av aluminiumprofiler." Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-65579.

Full text
Abstract:
Detta produktutvecklingsprojekt är utfört av Fredric Ericsson och Hampus Hammarbäck som examensarbete i Maskinteknik på Linnéuniversitetet. Projektet utfördes i samarbete med uppdragsgivarna Alutrade och Masterlite. Det följer hur en fasadlampa som ska belysa skyltar konstrueras och fokuserar på att systematisera konstruktionsprocessen. Bakgrunden till projektet ligger i brister hos den befintliga armaturen. Målet är att konstruera en armatur som är mer konkurrenskraftig än den befintliga. För att uppnå målet studerades problemet och modern produktutvecklingsteori tillämpas. Produktionsmetoder
APA, Harvard, Vancouver, ISO, and other styles
5

Robert, Sundström. "High cycle fatigue properties of extruded 6060-T6, 6063-T6 and 6082-T6 : Influence of die lines and microstructure on fatigue in flat extruded aluminum profiles." Thesis, KTH, Materialvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-235406.

Full text
Abstract:
Aluminum alloys are of great importance in the automotive and truck industries due to the weight savings that they can help to achieve. However, the use of such alloys in applications where they are subjected to alternating stresses requires knowledge about their fatigue behavior. Moreover, extrusion induces a strong texture and microstructural heterogeneity in the material and gives a surface with long grooves parallel to the extrusion direction (ED), so-called die lines. This anisotropy in surface conditions and microstructure may affect the fatigue properties. To investigate how die lines
APA, Harvard, Vancouver, ISO, and other styles
6

Boily, Pascal. "Application des capteurs thermiques implantés pour la détection du profil de gelée dans la cuve d'électrolyse /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2001. http://theses.uqac.ca.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Srinivasan, Paramasivam Thirupathy. "Profile and characterization of aluminum during drinking water treatment." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ60212.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Honzálek, Petr. "Studie realizovatelnosti výroby hliníkových dílů ve společnosti Alfa." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231949.

Full text
Abstract:
This thesis is dedicated to a study of manufacturing of aluminum parts at Alfa company. A complete analysis of the company's main product which are roller doors for commercial vehicles is elaborated. The thesis is based on a existing operation of the company and tries to find the optimal solution for the future. The result is the definition of a new solution and determination it’s operating costs, economic impacts and suggestions for improvement. Key words roller door, aluminum profiles, slat, roller shutter, manufacturing of aluminum parts.
APA, Harvard, Vancouver, ISO, and other styles
9

Hahn, Robert. "Werkzeuge zum impulsmagnetischen Warmfügen von Profilen aus Aluminium- und Magnesiumlegierungen." [S.l.] : [s.n.], 2004. http://edocs.tu-berlin.de/diss/2004/hahn_robert.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ryen, Øyvind. "Work Hardening and Mechanical Anisotropy of Aluminium Sheets and Profiles." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Natural Sciences and Technology, 2003. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-2.

Full text
Abstract:
<p>The processing of aluminium alloys from casting to end product is associated with a large number of metallurgical phenomena. In order to further improve and optimise process routes and alloys, a thorough understanding of the thermomechanical treatments by experimental observations and physically based modelling is necessary.</p><p>In part A of this thesis the work hardening behaviour of non-heat treatable alloys is followed up to large strains. The evolution in strength, microstructure and texture during cold rolling is analysed in commercially pure aluminium, AlMg alloys and AlMn alloys, c
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Aluminium profile"

1

Ong, Lay Im. Investigations into profile ring rolling of aluminium alloy bicycle wheel rims through experiments and numerical processsimulations. Brunel University, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

International Iron and Steel Institute. Committee on Economic Studies. Aluminum: An industry profile. The Institute, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. Agency for Toxic Substances and Disease Registry, Syracuse Research Corporation, and United States. Environmental Protection Agency, eds. Draft toxicological profile for aluminum. U.S. Department of Health and Human Services, Public Health Service, Agency for Toxic Substances and Disease Registry, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ahmed, R. Analysis and test of low profile aluminum aerospace tank dome. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ahmed, Rafiq. Analysis and test of low profile aluminum aerospace tank dome. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Altenpohl, Dietrich G. Aluminum: technology, applications, and environment: A profile of a modern metal : aluminum from within. 6th ed. The Aluminium Association, Inc., 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Altenpohl, Dietrich. Aluminum--technology, applications, and environment: A profile of a modern metal : Aluminum from within--the sixth edition. Edited by Kaufman J. G. 1931-. Aluminium Association, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bas Jan Emile van Rens. Finite element simulation of the aluminum extrusion process: Shape prediction for complex profiles. Technische Universiteit Eindhoven, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Randl, Chad. Aluminum replacement windows for steel projecting units with true divided lights and matching profiles. U.S. Dept. of the Interior, National Park Service, Technical Preservation Services, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

S, Zakany James, and United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket combustion experiments. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Aluminium profile"

1

Holloway, Steven Kendall. "The Aluminium Industry: A Descriptive Profile." In The Aluminium Multinationals and the Bauxite Cartel. Palgrave Macmillan UK, 1988. http://dx.doi.org/10.1007/978-1-349-09093-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mery, Domingo. "Crossing Line Profile: A New Approach to Detecting Defects in Aluminium Die Casting." In Image Analysis. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/3-540-45103-x_96.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zaloga, Alexandr, Shakhnaz Akhmedova, Igor Yakimov, et al. "Genetic Algorithm for Automated X-Ray Diffraction Full-Profile Analysis of Electrolyte Composition on Aluminium Smelters." In Informatics in Control, Automation and Robotics 12th International Conference, ICINCO 2015 Colmar, France, July 21-23, 2015 Revised Selected Papers. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31898-1_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ji, N., J. L. Lebru, P. Belliard, B. Bourniquel, and G. Maeder. "Microstructural Characterization of Heat-Treated Cold Worked Steels and Fatigued Shot-Peened Aluminium by X-Ray Diffraction Profile Analysis." In International Conference on Residual Stresses. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ismail, Azman, Mokhtar Awang, and Shaiful Hisham Samsudin. "The Influence of Process Parameters on the Temperature Profile of Friction Stir Welded Aluminium Alloy 6063-T6 Pipe Butt Joint." In Mechanical and Materials Engineering of Modern Structure and Component Design. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19443-1_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sameer, M. D., B. Archith Reddy, Ch Sai Kumar, N. Saiteja, and J. Dhanush. "Development of Al2O3 Nanoparticulates AA6061-T6 Aluminium Alloy Functionally Graded Composites via Friction Stir Processing: Effect of Tool Pin Profile on Mechanical and Tribological Properties." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7787-8_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hassamontr, Jaramporn, and Theera Leephaicharoen. "Multi-objective Optimization of Aluminum Profile Extrusion Process." In Proceedings of the 18th International Conference on Computing and Information Technology (IC2IT 2022). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99948-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Schafler, E., M. Zehetbauer, P. Hanak, et al. "Fragmentation in Large Strain Cold Rolled Aluminium as Observed by Synchrotron X-Ray Bragg Peak Profile Analysis (SXPA), Electron Back Scatter Patterning (EBSP) and Transmission Electron Microscopy (TEM)." In Investigations and Applications of Severe Plastic Deformation. Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-011-4062-1_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Costa e Silva, Eliana, Sofia Almeida, Aldina Correia, and Fátima De Almeida. "A Mathematical Model for Scheduling Aluminium Profiles Production." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-62684-5_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Holloway, Steven Kendall. "The Impact of the Bauxite Levy on Company Profits." In The Aluminium Multinationals and the Bauxite Cartel. Palgrave Macmillan UK, 1988. http://dx.doi.org/10.1007/978-1-349-09093-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Aluminium profile"

1

Dardor, Dareen, Daniel Fl�rez-Orrego, Reginald Germanier, Manuele Margni, and Fran�ois Mar�chal. "On the Economic Uncertainty and Crisis Resiliency of Decarbonization Solutions for the Aluminium Industry." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.116664.

Full text
Abstract:
The aluminium industry emits approximately 1.1 billion tonnes of CO2-eq annually, contributing about 2% of global industrial emissions. Decarbonization pathways aim to achieve net-zero emissions by 2050, but this requires making decisions today for technologies having lifetimes of 20 � 25 years, based on uncertain economic assumptions, particularly given the volatility of energy prices. Traditional price forecasting models often fail to anticipate major disruptions, such as the 2022 energy crisis. This work applies Monte-Carlo Analysis (MCA) to evaluate the financial stability of decarbonizati
APA, Harvard, Vancouver, ISO, and other styles
2

Shen, Ming, Sen Kang, and Casey Heurung. "USDA-certified Biobased, Low VOC and Biodegradable Paint Stripper and Graffiti Remover." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16510.

Full text
Abstract:
ABSTRACT For many decades, paint strippers have used hazardous solvents such as methylene chloride and N-Methyl-2-pyrrolidone (NMP) to effectively remove paints and coatings. But safety and environmental concerns have introduced an urgent need for environmentally-friendly alternatives. In March 2019, EPA banned the use methylene chloride in all paint removers for consumer use. However, its replacement, NMP, is now also deemed as a substance of very high concern (SVHC) and in jeopardy of being an option for paint stripping by regulatory forces. The newly developed green paint stripper discussed
APA, Harvard, Vancouver, ISO, and other styles
3

Shen, Ming, Sen Kang, and Casey Heurung. "USDA-certified Biobased, Low VOC and Biodegradable Paint Stripper and Graffiti Remover." In CORROSION 2020. NACE International, 2020. https://doi.org/10.5006/c2020-14503.

Full text
Abstract:
Abstract For many decades, paint strippers have used hazardous solvents such as methylene chloride and N-Methyl-2-pyrrolidone (NMP) to effectively remove paints and coatings. But safety and environmental concerns have introduced an urgent need for environmentally-friendly alternatives. In March 2019, EPA banned the use methylene chloride in all paint removers for consumer use. However, its replacement, NMP, is now also deemed as a substance of very high concern (SVHC) and in jeopardy of being an option for paint stripping by regulatory forces. The newly developed green paint stripper discussed
APA, Harvard, Vancouver, ISO, and other styles
4

Gaines, Cory, Elvin Sepanosian, Obed Villalpando, Sutine Sujittosakul, and Vilupanur A. Ravi. "Diffusion Model of Aluminide Coatings." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07840.

Full text
Abstract:
Abstract The deleterious effects of corrosion can be mitigated by the application of coatings that can form a protective oxide layer. Halide Activated Pack Cementation (HAPC) is one such coating method in which a halide vapor is generated within a pack and undergoes reactions that ultimately result in the coating element, e.g., Al, being deposited and diffused into the substrate. In this study, the solid state diffusion of aluminum into stainless steel substrates was modeled using a popular computing environment. UNS S30400 austenitic stainless steel was aluminized for various times at 850°C.
APA, Harvard, Vancouver, ISO, and other styles
5

Gunawardana, P. V. D. S., J. C. Walmsley, and H. J. Venvik. "Investigation of the Initial Stage of Metal Dusting Corrosion in the Conversion of Natural Gas to Synthesis Gas." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02769.

Full text
Abstract:
Abstract Nickel-based industrial alloy samples were pre-oxidized at different temperatures (540/760/ 980 °C) in pure or diluted (0.5% O2 in Ar) oxygen, followed by exposure to a high carbon activity gaseous mixture (10% CO in Ar) at 550 °C, in order to reveal factors critical to the initial carbon-formation preceding metal dusting corrosion. Fresh and treated samples were studied via optical-microscopy, EPMA, SEM/EDS, and depth profile analysis by Auger electron spectroscopy under Ar-ion sputtering. The resulting oxide layers strongly differ in thickness, ranging from 1 μm for the highest to l
APA, Harvard, Vancouver, ISO, and other styles
6

chao, zeng, and Xu Fengxiang. "YOLOv5-based defect recognition for aluminum profile surface." In Third International Conference on Machine Vision, Automatic Identification and Detection, edited by Renchao Jin. SPIE, 2024. http://dx.doi.org/10.1117/12.3036422.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Villanueva, David, Juan-Gabino Diaz-Martinez, G. Flores-Erana, and Irandi Gutérrez-Carmona. "Detection, measurement, and segmentation of aluminum profiles." In 2024 IEEE International Conference on Engineering Veracruz (ICEV). IEEE, 2024. http://dx.doi.org/10.1109/icev63254.2024.10766007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Zhike, Wenzhong Zhu, and Xin He. "Improved YOLOv8-based surface defect detection algorithm for aluminum profile." In Fifth International Conference on Computer Communication and Network Security (CCNS 2024), edited by Zhiyong Xiong and Zhaolong Ning. SPIE, 2024. http://dx.doi.org/10.1117/12.3038189.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Yuqian, and Junyan Wang. "Surface defect detection of aluminum profiles based on deep learning." In 2024 8th International Conference on Electrical, Mechanical and Computer Engineering (ICEMCE). IEEE, 2024. https://doi.org/10.1109/icemce64157.2024.10862601.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Huang, Zhichao, Zixuan Liu, Haibo Yin, Zhuoyang Song, and Jiao Tian. "Research on Surface Defect Detection of Aluminum Profile Based on Attention Mechanism ResNet." In 2024 2nd International Conference on Mechatronics, IoT and Industrial Informatics (ICMIII). IEEE, 2024. http://dx.doi.org/10.1109/icmiii62623.2024.00044.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Aluminium profile"

1

Margolis, Nancy. Energy and Environmental Profile of the Aluminum Industry. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/1218615.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schetselaar, E. M., G. Bellefleur, and P. Hunt. Integrated analyses of density, P-wave velocity, lithogeochemistry, and mineralogy to investigate effects of hydrothermal alteration and metamorphism on seismic reflectivity: a summary of results from the Lalor volcanogenic massive-sulfide deposit, Snow Lake, Manitoba. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/327999.

Full text
Abstract:
We present herein a summary of integrated data analyses aimed at investigating the effects of hydrothermal alteration on seismic reflectivity in the footwall of the Lalor volcanogenic massive-sulfide (VMS) deposit, Manitoba. Multivariate analyses of seismic rock properties, lithofacies, and hydrothermal alteration indices show an increase in P-wave velocity for altered volcanic and volcaniclastic lithofacies with respect to their least-altered equivalents. Scanning electron microscopy-energy dispersive X-ray spectrometry analyses of drill-core samples suggest that this P-wave velocity increase
APA, Harvard, Vancouver, ISO, and other styles
3

EXPERIMENTS ON BOLTED CONNECTIONS IN COLD-ROLLED ALUMINIUM PORTAL FRAMES. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.241.

Full text
Abstract:
The use of portal frame systems composed of cold-rolled aluminium profiles is likely to be a new structural solution in corrosive environments. In such structural systems, stainless steel bolts are commonly used as connectors to fasten various aluminium components in the full-scale systems. In these connections, the point fasteners may experience either shear force, torque and/or a combination of both, leading to complex behaviours of the connections. While the failure may occur at a bolt, the other structural components are still in the elastic state. Hence, investigation into the load-deform
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Aluminium profile' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography