Relevant bibliographies by topics / Cable and conductor products

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Cable and conductor products'

Author: Grafiati
Published: 30 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cable and conductor products.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cable and conductor products"

1

Bezprozvannych, G. V., M. V. Grynyshyna, and Y. S. Moskvitin. "Requirements for cables as categories of construction products and thermal resistance of power cables." Electrical Engineering & Electromechanics, no. 1 (January 1, 2024): 61–68. http://dx.doi.org/10.20998/2074-272x.2024.1.08.

Full text
Abstract:
Introduction. One of the main driving factors of the demand for cable and conductor products is the modern trend of urbanization, which leads to an increase in cities with significantly increased requirements for electrical networks of transportation and distribution of electrical energy. This requires the development of appropriate infrastructure with significant demand for electricity in the commercial, industrial and residential sectors. The construction industry uses a wide range of cables with an appropriate set of electrical and mechanical properties, resistance to the influence of exter
APA, Harvard, Vancouver, ISO, and other styles
2

Bezprozvannych, G. V., M. V. Grynyshyna, and Y. S. Moskvitin. "Requirements for cables as categories of construction products and thermal resistance of power cables." Electrical Engineering and Electromechanics 2024, no. 1 (2024): 61–68. https://doi.org/10.20998/2074-272X.2024.1.08.

Full text
Abstract:
<strong><em>Introduction</em></strong><em>. One of the main driving factors of the demand for cable and conductor products is the modern trend of urbanization, which leads to an increase in cities with significantly increased requirements for electrical networks of transportation and distribution of electrical energy. This requires the development of appropriate infrastructure with significant demand for electricity in the commercial, industrial and residential sectors. The construction industry uses a wide range of cables with an appropriate set of electrical and mechanical properties, resist
APA, Harvard, Vancouver, ISO, and other styles
3

Ivanova, Vera Pavlovna, and Victoria Vyacheslavovna Tsypkina. "Improving the reliability of power supply to active consumers by improving the technology for manufacturing cable product." E3S Web of Conferences 216 (2020): 01152. http://dx.doi.org/10.1051/e3sconf/202021601152.

Full text
Abstract:
The growing demand for high-quality transmission of electrical energy with a high level of reliability of cable lines is determined not only by the conditions of operation, installation, but also by the technology of cable production. This article discusses the issues of increasing the reliability of power supply to active consumers, which is achieved through the use of cable products with a higher level of reliability. The concept of "reliability", disclosed in the article, is valid for all cables and wires with insulation, which must maintain integrity as part of the product for the entire p
APA, Harvard, Vancouver, ISO, and other styles
4

Almahdy, Indra. "Implementation of Lean Manufacturing for Increasing the Quality of Aluminum Conductor Products in the Stranding Process with the DMAIC and VSM Method Approach: A Case Study in Electrical Manufacturing Component." International Journal of Scientific and Academic Research 03, no. 07 (2023): 01–08. http://dx.doi.org/10.54756/ijsar.2023.v3.7.1.

Full text
Abstract:
ElectricalCompany in this study is a manufacturing company engaged in the cable industry and one of the products it produces is an aluminum conductor. The current situation shows that the quality of aluminum conductor products still does not meet thecompany's standards. This can be seen from the production output data for the period June 2021 –November 2021 where the percentage ofaluminum conductor product faiuresexceeds the set target of 1.50%. The purpose of this research is to implement lean manufacturing to improve the quality of aluminum conductor products using the DMAIC (Define, Measure
APA, Harvard, Vancouver, ISO, and other styles
5

Tsypkina, V. V., V. P. Ivanova, and K. K. Jurayeva. "Cable conductor of cabling and wiring products based on composite materials for transport systems." E3S Web of Conferences 401 (2023): 03036. http://dx.doi.org/10.1051/e3sconf/202340103036.

Full text
Abstract:
The article deals with the issues of working out the technology of manufacturing cabling and wiring products that are used in railway transport systems. A cable conductor for a cable product, made on the basis of composite materials, was adopted as the object of research. The technology of production of composite billets and wire for cable products for subsequent drawing, as well as ways of obtaining them, is covered in detail. Special attention is paid to the problems of operation in railway transport, power transmission systems, which confirms the relevance of the research. The increase in t
APA, Harvard, Vancouver, ISO, and other styles
6

Yarkimbaev, Sh S., E. M. Fedorov, V. V. Redko, O. V. Galtseva, and X. Jiang. "Study of physical control methods for metric parameters of extended products in cable industry." Bulletin of the Karaganda University. "Physics" Series 106, no. 2 (2022): 7–17. http://dx.doi.org/10.31489/2022ph2/7-17.

Full text
Abstract:
The paper discusses the problems of electrical cables metric (geometric) parameters measurement. The methods of measuring the eccentricity of the electric cables (contact, ultrasonic, X-ray, and inductive-optical) are considered. The advantages and disadvantages of using these methods of technological control of cable products are shown. A study of the inductive-optical conversion method for measuring the eccentricity of a singlecore cable, including the circuit for switching on the windings of the inductive converter, is proposed; the design of this converter is presented. The proposed soluti
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Yuanchang, Shintaro Furuno, Sosuke Akagawa, et al. "Odor Recognition of Thermal Decomposition Products of Electric Cables Using Odor Sensing Arrays." Chemosensors 9, no. 9 (2021): 261. http://dx.doi.org/10.3390/chemosensors9090261.

Full text
Abstract:
An odor sensing system with chemosensitive resistors was used to identify the gases generated from overheated cables to prevent fire. Three different electric cables for a distribution cabinet were used. The cables had an insulation layer made of polyvinyl chloride (PVC) or cross-linked polyethylene (XLPE). The heat resistance of the cables was tested by differential thermal and thermogravimetric analyses. The thermal decomposition products of the cables were investigated by gas chromatography-mass spectrometry (GC-MS). For the odor sensing system, two types of 16-channel array were used to de
APA, Harvard, Vancouver, ISO, and other styles
8

Rudyk, Yu I., and V. M. Shunkin. "DETERMINATION OF THE QUANTITY OF COMBUSTIBLE MATERIAL IN CABLE PRODUCTS IN THE PROCESS OF FIRE SAFETY TESTING." Fire Safety, no. 34 (July 19, 2019): 78–83. http://dx.doi.org/10.32447/20786662.34.2019.13.

Full text
Abstract:
Introduction. In order to protect objects from dangerous manifestations of fire of cable products, electrical lines are designed and projected in accordance with the fire-protection requirements and the normative documents. Purpose. The purpose of this article is to analyze this problem in several areas concerning the situation with a systematic approach to the technical regulation in Ukraine of such a sector of fire safety as the requirements for cable-wiring lines. Methods. Methods of research: calculations using a mathematical model; comparison of the results of the calculation, forecasting
APA, Harvard, Vancouver, ISO, and other styles
9

Kushnirenko, Оksana, та Oleksandr Deineko. "The adoption of the АСАА in the interests of Ukrainian producers and public safety". University Economic Bulletin, № 45 (27 травня 2020): 84–92. http://dx.doi.org/10.31470/2306-546x-2020-45-84-92.

Full text
Abstract:
Relevance of the research topic. Identification of the features of negative influence on the further development of Ukrainian production of cable and wire products, namely, the growth of imports of low-quality products and saturation of the market with counterfeit products, which leads to a decrease in production volumes, a reduction in productioncapacities, and profit losses for most Ukrainian manufacturers. In addition, the inefficiency of technical regulation programs leads to threats the security of the society: the use of counterfeit products is one of the causes of fires, which leads to
APA, Harvard, Vancouver, ISO, and other styles
10

Yao, Guowen, Xuanbo He, Jiawei Liu, Zengwei Guo, and Pengyu Chen. "Test Study of the Bridge Cable Corrosion Protection Mechanism Based on Impressed Current Cathodic Protection." Lubricants 11, no. 1 (2023): 30. http://dx.doi.org/10.3390/lubricants11010030.

Full text
Abstract:
The cable system is an important bearing element of a bridge with stay cables or slings and a matter of major concern in the safety of the bridge structure. Bridge cables are vulnerable to corrosion induced by leakage and soaking during their service life. To solve this problem, and based on the idea of proactive control by means of the impressed current cathodic protection (ICCP) of bridge cables, this study designs and develops an ICCP system device for bridge cable protection. In this study, an accelerated corrosion test was conducted to test the ICCP system of steel wires inside the cables
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Cable and conductor products"

1

Nuttall, Kevin. "The on-line determination of underground cable conductor temperatures." Thesis, Queensland University of Technology, 1986. https://eprints.qut.edu.au/36458/1/36458_Nuttall_1986.pdf.

Full text
Abstract:
The criterion determining the maximum load able to be sustained by an underground cable is its maximum allowable conductor temperature. Above this value, degradation of insulation will commence and lead to ultimate failure of the cable. Methods using a digital computer program are available for calculating cable conductor temperature given the thermal characteristics of the cable and its environment and the loads at whlch the cable will be operated. Such methods invariably assume a 24 hourly load cycle to which the cable is subjected continuously and a maximum ground ambient temperatu
APA, Harvard, Vancouver, ISO, and other styles
2

Saldívar, Flores Oscar. "Formas de producir cables superconductores." Bachelor's thesis, Universidad Nacional Mayor de San Marcos, 2015. https://hdl.handle.net/20.500.12672/5255.

Full text
Abstract:
Ofrece una visión general de los cables superconductores, cómo está formado un cable superconductor además de sus diseños, los proyectos que se están dando en el mundo y los beneficios que tiene la implementación de estos cables en la red eléctrica.<br>Trabajo de suficiencia profesional
APA, Harvard, Vancouver, ISO, and other styles
3

Long, Alexander E. (Alexander Enrico). "Transverse heat transfer in a cable-in-conduit conductor with central cooling channel." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/38072.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Okubo, Hitoshi, Masahiro Hanai, Naoki Hayakawa, Fumihiko Kato, and Hiroki Kojima. "Superconducting Fault Current Limiting Cable (SFCLC) with Current Limitation and Recovery Function." Elsevier, 2012. http://hdl.handle.net/2237/20732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Man, Yu. "Aluminium cables in automotive applications : Prestudy of aluminium cable uses in Scania products&Failure analysis and evaluation." Thesis, KTH, Materialvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-191090.

Full text
Abstract:
The increasing demand of light constructed vehicles as well as soaring price of copper metal owing to limited nature resources have been promoting the use of aluminium metal as an alternative conductor of automotive cables. This thesis work is to lay theoretical foundations for further research and development regarding the introduction of new automotive cables i.e. aluminium cables. Current application of automotive aluminium cables in automotive industry as well as failure analysis and evaluation approaches with respect to aluminium cables in automotive settings can serve as a baseline for f
APA, Harvard, Vancouver, ISO, and other styles
6

Valenta, Jakub. "Tester kabeláže." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442457.

Full text
Abstract:
This semestral paper deals with the issues of testing and requirements examinations for cables and cable harnesses. These terms are defined in the work and the difference in their meaning is described. The work also describes the characteristic features of cables and cable harnesses, explains their importance and focuses in more detail on the variable properties that may change over time or that are dependent on manufacturing errors. The principles and procedures of tests of these properties are covered in the work and are the essence of the subsequent practical part. In this part, the work de
APA, Harvard, Vancouver, ISO, and other styles
7

Talami, Matteo. "Modeling of the Toroidal Field Insert coil for the ITER Project." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amslaurea.unibo.it/12916/.

Full text
Abstract:
Il contenuto della tesi riguarda le analisi numeriche e sperimentali effettuate su un campione di cavo superconduttivo del sistema magnetico del reattore sperimentale per la fusione nucleare “ITER”. In particolare, il campione di cavo denominato “Toroidal Field Insert” o “TFI”, appartiene al sistema magnetico toroidale della macchina e viene inserito in un solenoide esterno in modo da replicare le condizioni di campo magnetico tipiche del normale funzionamento di questo conduttore. Le analisi sperimentali effettuate sul campione sono mirate alla caratterizzazione del comportamento durante un i
APA, Harvard, Vancouver, ISO, and other styles
8

Succi, Giovanni. "Analysis of impregnated Niobium-Tin coils for the High-luminosity LHC magnets." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019. http://amslaurea.unibo.it/17800/.

Full text
Abstract:
The High-luminosity project of the LHC calls for the employment of a new technology of superconducting magnets, which will make use of a material never used before, Nb3Sn. Some of the dipole magnets will be replaced inside the accelerator to enhance the collimating system of the beams and will be capable of producing magnetic fields in the order of 12 T, against the 8 T of the present machine. Experimental tests were conducted at the cryogenic laboratory at CERN to study the thermal behavior of a sample of the 11 T dipole under AC losses, with typical values of the input power density in the
APA, Harvard, Vancouver, ISO, and other styles
9

Novák, Vojtěch. "Návrh rekonstrukce distribuční sítě v dané lokalitě." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217823.

Full text
Abstract:
This diploma thesis is concerned with reconstruction of distribution network in Hruba Vrbka. The diploma thesis is divided in two parts. For better understanding to this issue, the first theoretical part is shortly dedicated to the history of electrical power system, to the several types of distribution network of low voltage and high voltage and their utilization in the area, considering the reliability and the quality of delivery of the electric energy. In this thesis there is mentioned division of distribution grids according to placing of cable lines, according to voltage and according to
APA, Harvard, Vancouver, ISO, and other styles
10

Richter, Miroslav. "Návrh rekonstrukce distribuční sítě v zadané oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217196.

Full text
Abstract:
The dissertation describes several types of low and high voltage distribution networks including their implementation in specified location with regards to the reliability and quality of electric power supply. The distributions networks are classified according to ways of cable routing, distribution line voltage levels as well as according to types of network interconnections. The high and low voltage distribution networks are further categorized based on used cable types, where, more attention is paid to insulated lines used in the Czech Republic, low voltage lines called „AES“ and „PAS“ high
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Cable and conductor products"

1

Clinch, Richard P. Wire and cable harnesses and assemblies. Leading Edge Reports, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Beyer, Günter. Global Cable Industry: Materials, Markets, Products. Wiley & Sons, Limited, John, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Beyer, Günter. Global Cable Industry: Materials, Markets, Products. Wiley & Sons, Incorporated, John, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Beyer, Günter. Global Cable Industry: Materials, Markets, Products. Wiley & Sons, Incorporated, John, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Beyer, Günter. Global Cable Industry: Materials, Markets, Products. Wiley & Sons, Incorporated, John, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

National Center for Construction Education and Research (NCCER) (U.S.). 80203-11 Cable and Conductor Installation and Removal TG. Pearson Education, Limited, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

National Aeronautics and Space Administration and NASA. Flat Conductor Cable Commercialization Project : Final Report: April 29 1977. Independently Published, 2022.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Canada, Industry Science and Technology Canada. Electrical lighting and wiring products. 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wire & Cable Products (UK Markets: Annual Reports 1993: AR44). The Stationery Office Books (Agencies), 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wire & Cable Products (UK Markets: Annual Reports 1994: AR44). The Stationery Office Books (Agencies), 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Cable and conductor products"

1

Fujikami, J., H. Mukai, K. Sato, T. Hara, H. Ishii, and T. Yamamoto. "5m/2kA High-Tc Cable Conductor." In Advances in Superconductivity V. Springer Japan, 1993. http://dx.doi.org/10.1007/978-4-431-68305-6_279.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Saga, Nobuhiro, Jun Fujikami, Kazuya Ohmatsu, et al. "Development of 50m-Long HTS Cable Conductor." In Advances in Superconductivity IX. Springer Japan, 1997. http://dx.doi.org/10.1007/978-4-431-68473-2_161.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ohmatsu, K., J. Fujikami, T. Taneda, et al. "HTS Transposed Cable Conductor with Low AC Loss." In Advances in Superconductivity XI. Springer Japan, 1999. http://dx.doi.org/10.1007/978-4-431-66874-9_229.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fujikami, J., N. Shibuta, K. Sato, H. Ishii, and T. Hara. "Flexible High Tc Cable Conductor and Its AC Characteristic." In Advances in Superconductivity VI. Springer Japan, 1994. http://dx.doi.org/10.1007/978-4-431-68266-0_284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fujikami, J., N. Shibuta, K. Sato, H. Ishii, and T. Hara. "Effective Reduction of AC Loss in HTSC Cable Conductor." In Advances in Superconductivity VII. Springer Japan, 1995. http://dx.doi.org/10.1007/978-4-431-68535-7_270.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fujikami, J., N. Saga, K. Ohmatsu, et al. "Electromagnetic Behavior of HTSC Cable Conductor in AC Loading." In Advances in Superconductivity VIII. Springer Japan, 1996. http://dx.doi.org/10.1007/978-4-431-66871-8_296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Fujikami, Jun, Munetsugu Ueyama, Nobuhiro Saga, et al. "Development of HTS cable Conductor with Multi-layer Structure." In Advances in Superconductivity X. Springer Japan, 1998. http://dx.doi.org/10.1007/978-4-431-66879-4_218.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Maekawa, R., M. R. Smith, and S. W. Van Sciver. "Thermal Hydraulic Characteristics of a Prototype CEA Cable-in-Conduit Conductor." In A Cryogenic Engineering Conference Publication. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0373-2_68.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Warner, Brent A., and Susan R. Breon. "Electromagnetic Interference (EMI) and Thermal Studies of Flat Conductor Cable (FCC)." In Advances in Cryogenic Engineering. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2522-6_142.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Taneda, T., M. Ueyama, T. Kaneko, et al. "Development of Long Length Round Strand for HTS Transposed Cable Conductor." In Advances in Superconductivity XI. Springer Japan, 1999. http://dx.doi.org/10.1007/978-4-431-66874-9_230.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cable and conductor products"

1

Goldstein, A. "Cable Products and Electromagnetic Compatibility." In EMC_1990_Wroclaw. IEEE, 1990. https://doi.org/10.23919/emc.1990.10832951.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Machczyński, Wojciech. "Voltage between Sheath and Cable Conductor Due to Conductive Effects on Underground Cable." In 1996_EMC-Europe_Roma. IEEE, 1996. https://doi.org/10.23919/emc.1996.10783827.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Czarnywojtek, P., and W. Machczyński. "SPICE — Simulation of Voltages between Sheath and Cable Conductor due to External Excitation." In EMC_1998_Wroclaw. IEEE, 1998. https://doi.org/10.23919/emc.1998.10834735.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Che, Haolun, Jian Hao, Zhen Gao, Xinlong Zheng, and Weilong Peng. "Conductor Temperature Comparative Analysis for EHV 500 kV XLPE Submarine Cable Under Different Laying Conditions." In 2024 10th International Conference on Condition Monitoring and Diagnosis (CMD). IEEE, 2024. https://doi.org/10.23919/cmd62064.2024.10766139.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shah, Syed Waqas Hussain, and Salman Amin. "Aging and Corrosion of Aluminum Conductor Caused by Fireproof Mud in a Simulated Cable Trench." In 2024 3rd International Conference on Emerging Trends in Electrical, Control, and Telecommunication Engineering (ETECTE). IEEE, 2024. https://doi.org/10.1109/etecte63967.2024.10823918.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wu, Su-Zhou, Xiao-Jun Zhang, Ze-Yang Lei, Wen-Bing Zhuang, Hai-Song Xu, and Da-Ning Zhang. "Research on Nondestructive Identification and Location of Conductor-Discontinuous Cable Based on the Improved Integral Transformation." In 2024 10th International Conference on Condition Monitoring and Diagnosis (CMD). IEEE, 2024. https://doi.org/10.23919/cmd62064.2024.10766185.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Abd Rahman, Zarismail, Syarfa Zahirah Sapuan, Abdulrahman Amer, and Mohd Fahrul Hassan. "Longitudinal Voltage Analysis between High Voltage Power Cable and Adjacent Conductor & Cables in Railways Using Analytical Methods." In 2024 IEEE 15th Control and System Graduate Research Colloquium (ICSGRC). IEEE, 2024. http://dx.doi.org/10.1109/icsgrc62081.2024.10691082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jiang, Xiaoli, Hans Hopman, Yong Bai, and Pan Fang. "Bending Study of Copper Conductors From Power Cables." In ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/omae2022-86113.

Full text
Abstract:
Abstract Submarine power cables are considered lifelines in wind farm engineering, playing a key role in transporting electric current produced by wind turbines or wave converters. The bending behaviour of a power cable is a complex issue due to both its various materials and multi-layer structures. The copper conductor in the middle of a power cable is especially complex as it is composed of numerous helical copper wires. The influence of the copper conductor on the overall bending behaviour is still not clear due to rare studies regarding this topic. This paper focuses on the pure bending te
APA, Harvard, Vancouver, ISO, and other styles
9

Oyori, Hitoshi, Sho Sakurai, Shin Kusase, et al. "Conceptual Design of a Superconducting Aero Electric Engine System." In AeroTech Conference & Exhibition. SAE International, 2025. https://doi.org/10.4271/2025-01-0146.

Full text
Abstract:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;The goal of the development of an electric aircraft engine is to create an aircraft system that achieves ultimate efficiency using hydrogen fuel instead of fossil fuels. Therefore, it is necessary to focus on reducing weight as much as possible, and this paper describes the approach to such fuel cell-powered aircraft. The authors have adopted a superconducting coreless rotating electric machine with an integrated hydrogen tank and are pursuing a target of 70kg or less for the main components of a 2MW rotating electric ma
APA, Harvard, Vancouver, ISO, and other styles
10

Ahmed, Danish, Mohammed Ahmed Kaki, Sajid Mehmood, and Haitham S. Saeed Aljuaydi. "Innovative Coiled Tubing Hybrid Fiber Optics Technology Increases Operational Efficiency." In Middle East Oil, Gas and Geosciences Show. SPE, 2023. http://dx.doi.org/10.2118/213739-ms.

Full text
Abstract:
Abstract Production logging is very essential to understand the flow profile of the formation that is being produced from. It helps to identify the contribution of the oil, water, and gas to the total fluid. To add, it is done on a usual basis to monitor the reservoir performance. Organic deposit adherence to production logging tool (PLT) spinners can hinder logging operations and result in inconclusive data acquisition. To avoid this problem, standard practices have been developed to clean out organic deposits using a standard coiled tubing (CT) reel followed by production logging using a CT
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cable and conductor products"

1

Iyer, Ananth V., Samuel Labi, Steven Dunlop, Thomas Brady Jr., and Eki Amijaya. Cost and Benefit Analysis of Installing Fiber Optics on INDOT Projects. Purdue University, 2020. http://dx.doi.org/10.5703/1288284317131.

Full text
Abstract:
The Indiana Department of Transportation (INDOT) is tasked with the stewardship of billions of dollars’ worth of public invested highway infrastructure. Not only does INDOT continually seek design and operational policies that foster cost effective project delivery and procurement, they also seek opportunities for revenue generation. Due to population growth and the increased demand for online connectivity and global information transmission, the fiber-optic cable industry has experienced rapid growth over the past few years. Information and communication technology (ICT) companies have long s
APA, Harvard, Vancouver, ISO, and other styles
2

Miller, David, Rachael Arnold, Peter Hacke, et al. Photovoltaic Cable Jackets: A Comparison of Representative Products Using Combined-Accelerated Stress Testing. Office of Scientific and Technical Information (OSTI), 2025. https://doi.org/10.2172/2502027.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tow Leong, Tiang, Mohd Saufi Ahmad, Ang Qian Yee, et al. HANDBOOK OF ELECTRICAL SYSTEM DESIGN FOR NON-DOMESTIC BUILDING. Penerbit Universiti Malaysia Perlis, 2023. http://dx.doi.org/10.58915/techrpt2023.001.

Full text
Abstract:
This technical report presents the electrical system installation design for development of a factory with 1 storey and 2 storey of offices. Firstly, the general methodology of designing the electrical system are elaborated in this report. As overall, the methodologies in designing the components of the electrical system are explained and elaborated, which included: (a) load and maximum demand estimation; (b) miniature circuit breaker (MCB) selection; (c) moulded case circuit breaker (MCCB) selection; (d) air circuit breaker (ACB) selection, (e) residual current device (RCD) selection; (f) pro
APA, Harvard, Vancouver, ISO, and other styles
4

Atkinson, E. A. Regional mapping and qualitative petroleum resource assessment of the Magdalen Basin, Gulf of St. Lawrence, Quebec, Prince Edward Island, New Brunswick, Nova Scotia, and Newfoundland and Labrador. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331452.

Full text
Abstract:
The Geological Survey of Canada conducted a broad regional study of the Magdalen Basin in the Gulf of St. Lawrence, as part of the Marine Conservation Targets initiative. MCT is a national initiative to protect more of Canada's offshore areas, and resource assessment and related regional mapping are part of the review process. This study assembled a large seismic and geologic database that allowed new regional mapping of several key horizons in this basin. Digital seismic data was donated by industry, and reprocessing undertaken both in-house and with contractors. Wells were correlated and top
APA, Harvard, Vancouver, ISO, and other styles
5

African Open Science Platform Part 1: Landscape Study. Academy of Science of South Africa (ASSAf), 2019. http://dx.doi.org/10.17159/assaf.2019/0047.

Full text
Abstract:
This report maps the African landscape of Open Science – with a focus on Open Data as a sub-set of Open Science. Data to inform the landscape study were collected through a variety of methods, including surveys, desk research, engagement with a community of practice, networking with stakeholders, participation in conferences, case study presentations, and workshops hosted. Although the majority of African countries (35 of 54) demonstrates commitment to science through its investment in research and development (R&amp;D), academies of science, ministries of science and technology, policies, rec
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cable and conductor products' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography