Relevant bibliographies by topics / Calibration of measuring equipment

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Calibration of measuring equipment'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Calibration of measuring equipment.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Calibration of measuring equipment"

1

Hegeduš, Hrvoje, Marko Jurcevic, and Roman Malaric. "Internet-Enabled Calibration." International Journal of Measurement Technologies and Instrumentation Engineering 1, no. 1 (2011): 24–37. http://dx.doi.org/10.4018/ijmtie.2011010103.

Full text
Abstract:
Calibration of measuring instruments provides the confidence in measurements. It is the obligation of every laboratory to have its measuring equipment calibrated in regular intervals. This obligation means that the laboratory must send its equipment to the calibration laboratory every year or two depending on the calibration intervals. During this time the equipment is not available and this presents a financial burden to the laboratory of the customer. Since many of the modern instruments include some communication interfaces, it was made possible to create an Internet-enabled calibration sys
APA, Harvard, Vancouver, ISO, and other styles
2

Vasylieva, Olena, Yurii Pavlenko, and Valeriy Ogar. "Calibration complex of radio measuring equipment." Ukrainian Metrological Journal, no. 2 (June 25, 2024): 10–17. http://dx.doi.org/10.24027/2306-7039.2.2024.307137.

Full text
Abstract:
Modern trends in the development of radio measuring equipment require improvement of the principles of metrological support of these devices and corresponding reference base. The new approach is based on the digitalisation of equipment, programming of measurement procedures, and the transition from single measurement standards to measurement complexes. The paper describes the complex developed at the NSC “Institute of Metrology” and designed for verification and calibration of a wide range of radio measuring equipment, where all these approaches are realised, presents methodological, software
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Xiang Jun, Shu Zhang, Yi Liu, and Dou Ji. "The Electrochemical Principle of Measuring Underwater Electric Field." Applied Mechanics and Materials 232 (November 2012): 863–68. http://dx.doi.org/10.4028/www.scientific.net/amm.232.863.

Full text
Abstract:
Whether electric stealth ship, or ship by ship to achieve the electric field detection, location can’t be separated to provide high-precision measuring equipment field measured data, underwater electric field to discuss the principle of electrochemical measurements and underwater electric field measurement equipment calibration, field measurements of underwater deep understanding of electrochemical principles and calibration of measuring equipment underwater electric field can improve the accuracy of the electric field experiments, and finally according to proposed calibration method, calibrat
APA, Harvard, Vancouver, ISO, and other styles
4

Fidrovska, Nataliia, Roman Ponomarenko, Evgen Slepuzhnikov, and Dmytro Kozodoi. "JUSTIFICATION OF TENSORISTOR CALIBRATION IN A COMPLEX WITH MEASURING EQUIPMENT." Collected scientific works of Ukrainian State University of Railway Transport, no. 194 (October 5, 2021): 75–85. http://dx.doi.org/10.18664/1994-7852.194.2020.230411.

Full text
Abstract:
The article describes the process of calibrating strain gauge and measuring equipment. Modern machines have a complex design of the shapes of parts and assemblies. The loads acting on them often do not allow the determination of the stress state by modeling or calculation when creating these structurally complex machines. Therefore, conducting experimental studies using the strain gauge method is an extremely important task in real time. But for such a study, it is necessary to calibrate the strain gauges. Calibration must be performed to determine the functional relationship between the load
APA, Harvard, Vancouver, ISO, and other styles
5

Niu, Man Ke, Bao Qiang Yang, and Zheng Wei Lei. "The Analysis for Series Mode Noise Suppression in Measuring Equipment Calibration." Advanced Materials Research 718-720 (July 2013): 971–75. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.971.

Full text
Abstract:
The application of a variety of high-tech equipment, greatly improve the execute effectiveness of the equipment. It plays a decisive role that internal parameters of the device is accurate or not, for the normal function used of these complex instrument systems. The importance of maintenance and calibration process for the test equipments accuracy must be reliable and accurate is increasingly obvious. The series mode noise suppression in equipment measurement and testing process is often encountered and must be solved in related field.
APA, Harvard, Vancouver, ISO, and other styles
6

Niu, Man Ke, Bao Qiang Yang, and Zheng Wei Lei. "The Study for Common Mode Noise Suppression in Measuring Equipment Calibration." Advanced Materials Research 718-720 (July 2013): 967–70. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.967.

Full text
Abstract:
The application of a variety of high-tech equipment, greatly improve the execute effectiveness of the equipment system. It plays a decisive role that internal parameters of the device is accurate or not, for the normal function used of these complex instrument systems. The importance of maintenance and calibration process for the test equipments accuracy must be reliable and accurate is increasingly obvious. The common mode noise suppression in equipment measurement and testing process is often encountered and must be solved in related field.
APA, Harvard, Vancouver, ISO, and other styles
7

Sulyma, Oleg, Mykola Mykyichuk, and Iryna Zinchuk. "THE MEASURING CHANNELS CALIBRATION IN THE INDUSTRY." Measuring Equipment and Metrology 82, no. 4 (2021): 32–35. http://dx.doi.org/10.23939/istcmtm2021.04.032.

Full text
Abstract:
The trend of development of measuring equipment in particular measuring systems and technological processes leads to the need of measuring the temperature without dismantling the primary transducers and stopping the technological process in a very wide range and with high accuracy. The choice of methods and means of measurement depends on such factors as the value of measured temperature, necessary accuracy of measurement, conditions of measurements, and operation of the investigated object. The topicality of the problem is that industrial metrology operates the temperature measuring systems,
APA, Harvard, Vancouver, ISO, and other styles
8

Amalia, Fika, and Asep Ririh Riswaya. "Web-Based Measuring Instrument Calibration Scheduling Information System." Electronic, Business, Management and Technology Journal 1, no. 2 (2024): 87–93. http://dx.doi.org/10.55208/ebmtj.v1i2.111.

Full text
Abstract:
The production method has prioritized guaranteeing excellent manufacturing quality in response to the increasing competitiveness in the clothing industry. Utilizing a fabric roll meter measuring instrument dramatically enhances the overall quality of the product by guaranteeing precise measurements. Roll meter fabric measuring equipment in the garment industry evaluates product accuracy based on customer specifications, ensuring exceptional quality. Effective regulation is essential for the management and upkeep of cloth roll meter measuring instruments. Therefore, it is necessary to develop a
APA, Harvard, Vancouver, ISO, and other styles
9

Amalia, Fika, and Asep Ririh Riswaya. "Web-Based Measuring Instrument Calibration Scheduling Information System: Case Study of One of the Textile Companies in Bandung City." Electronic, Business, Management and Technology Journal 1, no. 2 (2023): 87–93. https://doi.org/10.55208/yebmtj.v1i2.111.

Full text
Abstract:
The production method has prioritized guaranteeing excellent manufacturing quality in response to the increasing competitiveness in the clothing industry. Utilizing a fabric roll meter measuring instrument dramatically enhances the overall quality of the product by guaranteeing precise measurements. Roll meter fabric measuring equipment in the garment industry evaluates product accuracy based on customer specifications, ensuring exceptional quality. Effective regulation is essential for the management and upkeep of cloth roll meter measuring instruments. Therefore, it is necessary to develop a
APA, Harvard, Vancouver, ISO, and other styles
10

Mosharenkov, Viktor, and Serhii Voitenko. "Development of a generalized mathematical model of static error electromechanical measuring equipment." Advanced Information Systems 5, no. 2 (2021): 38–41. http://dx.doi.org/10.20998/2522-9052.2021.2.06.

Full text
Abstract:
To keep military equipment fit for use, carry out maintenance activities, an important and integral part of which is metrological service. The effectiveness of metrological services depends on the completeness of the coverage of the monitored parameters, frequency and reliability of their measuring control. The most common, at present, when controlling the parameters of military equipment are electromechanical measuring equipment. The main metrological characteristic of electromechanical measuring instruments in a static measurement mode is the nominal calibration characteristic. During operat
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Calibration of measuring equipment"

1

LUCENA, RODRIGO F. de. "Implantacao de um programa de controle de qualidade em equipamentos de raios X por meio de medidores nao invasivos." reponame:Repositório Institucional do IPEN, 2010. http://repositorio.ipen.br:8080/xmlui/handle/123456789/9571.

Full text
Abstract:
Made available in DSpace on 2014-10-09T12:28:10Z (GMT). No. of bitstreams: 0<br>Made available in DSpace on 2014-10-09T14:01:44Z (GMT). No. of bitstreams: 0<br>Dissertacao (Mestrado)<br>IPEN/D<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
APA, Harvard, Vancouver, ISO, and other styles
2

Larsson, Peter. "Calibration of Ionization Chambers for Measuring Air Kerma Integrated over Beam Area in Diagnostic Radiology." Doctoral thesis, Linköpings universitet, Medicinsk radiofysik, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-7848.

Full text
Abstract:
The air kerma area product PKA is an important quantity used by hospital physicists in quality assurance and optimization processes in diagnostic radiology and is recommended by national authorities for setting of diagnostic reference levels. PKA can be measured using a transmission ionization chamber (kerma area product (KAP) meter) mounted on the collimator housing. Its signal QKAP must be calibrated to give values of PKA. The objective of this thesis is to analyze the factors influencing the accuracy of the calibration coefficients k= PKA/QKAP and of reported PKA-values. Due to attenuation
APA, Harvard, Vancouver, ISO, and other styles
3

ROS, RENATO A. "Metodologia de controle de qualidade de equipamentos de raios x (nivel diagnostico) utilizados em calibracao de instrumentos." reponame:Repositório Institucional do IPEN, 2000. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10803.

Full text
Abstract:
Made available in DSpace on 2014-10-09T12:44:11Z (GMT). No. of bitstreams: 0<br>Made available in DSpace on 2014-10-09T14:07:52Z (GMT). No. of bitstreams: 1 07071.pdf: 5827883 bytes, checksum: 3d1bd075be2e6283f7d961fc597f6d59 (MD5)<br>Dissertacao (Mestrado)<br>IPEN/D<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
APA, Harvard, Vancouver, ISO, and other styles
4

VIVOLO, VITOR. "Desenvolvimento de um sistema de referencia para determinacao do equivalente de dose pessoal e da constancia de feixes de radiacao X." reponame:Repositório Institucional do IPEN, 2006. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11379.

Full text
Abstract:
Made available in DSpace on 2014-10-09T12:51:17Z (GMT). No. of bitstreams: 0<br>Made available in DSpace on 2014-10-09T14:05:52Z (GMT). No. of bitstreams: 0<br>Tese (Doutoramento)<br>IPEN/T<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
APA, Harvard, Vancouver, ISO, and other styles
5

Малецька, О. Є., та А. М. Денисенко. "Метрологічне підтвердження придатності на підставі калібрування засобів вимірювальної техніки". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66626.

Full text
Abstract:
Метою цього докладу є розгляд використання результатів калібрування засобів вимірювальної техніки (далі - ЗВТ) для визначення їх придатності щодо вирішення конкретного вимірювального завдання як підчас проведення вимірювань в технологічних процесах на підприємствах, так і при проведенні робіт в акредитованих випробувальних лабораторіях. Згідно із Законом України «Про метрологію та метрологічну діяльність» забезпечення єдності вимірювань обумовлює наявність похибки або невизначеності вимірювань, які відомі з певною ймовірністю і не виходять за встановлені границі.
APA, Harvard, Vancouver, ISO, and other styles
6

Folkeson, Tea. "WCDMA User Equipment Output Power Calibration." Thesis, Linköping University, Department of Electrical Engineering, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1691.

Full text
Abstract:
<p>To save time in Flextronics high volume production, the time for test and calibration of mobile telephones need to be as short and accurate as possible. In the wideband code division multiple access (WCDMA) case, the output power calibration is the most critical calibration concerning accuracy. The aim with this thesis was to find a faster calibration method than the one that exists today and still retain accuracy. </p><p>The Third Generation Partnership Project (3GPP) outlines the requirements of the output power and they must be thoroughly considered when choosing calibration method. Meas
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Kuangmin. "Enhanced Distance Measuring Equipment Carrier Phase." Ohio University / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1416581585.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Charbachi, Peter, and Filippo Ferrario. "Methods for Automatic Hydraulics Calibration in Construction Equipment." Thesis, Mälardalens högskola, Inbyggda system, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-40341.

Full text
Abstract:
In this thesis we investigate the problem of automatic calibration and control of hydraulic components in the domain of construction equipment. Methods that are able to remove a costly manual approach in favour of an automatic one are investigated and evaluated. The thesis aims to investigate what methods are available in achieving this goal as well as evaluate the performance and applicability of such methods in the domain of construction equipment. The literature indicates that a great focus is put on learning a model of the plant at run time in order to provide accurate control. Common appr
APA, Harvard, Vancouver, ISO, and other styles
9

Bevel, Kenneth D., Robert N. Stonaker, and Kelly M. Johnson. "Increasing operational availability of H-60 calibration support equipment." Monterey, California. Naval Postgraduate School, 2006. http://hdl.handle.net/10945/10055.

Full text
Abstract:
MBA Professional Report<br>The purpose of this MBA Project was to identify inefficiencies in the H-60 support equipment calibration process at Naval Air Station, North Island and analyze their impact on operational availability. To conduct this analysis, the researchers mapped the standard calibration process at North Island from beginning to end from a using unit perspective. After identifying the process, the researchers calculated the inherent and operational availability and determined the impacts of process inefficiencies on asset operational availability. The researchers proposed changes
APA, Harvard, Vancouver, ISO, and other styles
10

Jonsson, Per-Axel. "Equipment for measuring cosmic-ray effects on DRAM." Thesis, Linköping University, Department of Electrical Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-9764.

Full text
Abstract:
<p>Nuclear particles hitting the silicon in a electronic device can cause a change in the data in a memory bit cell or in a flip-flop. The device is still working, but the data is corrupted and this is called a soft error. A soft error caused by a single nuclear particle is called a single event upset and is a growing problem. Research is ongoing at Saab aiming at how susceptible random access memories are to protons and neutrons.</p><p>This thesis describes the development of equipment for measuring cosmic-ray effects on DRAM in laboratories. The system is built on existing hardware with a FP
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Calibration of measuring equipment"

1

Lamperti, Paul J. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Michelle, O'Brien, and National Institute of Standards and Technology (U.S.), eds. Calibration of X-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lamperti, Paul J. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lamperti, Paul J. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lamperti, Paul J. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, National Bureau of Standards, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lamperti, Paul J. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

P, Loftus Thomas, Loevinger Robert, and National Institute of Standards and Technology (U.S.), eds. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

P, Loftus Thomas, Loevinger Robert, and National Institute of Standards and Technology (U.S.), eds. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lamperti, Paul J. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Michelle, O'Brien, and National Institute of Standards and Technology (U.S.), eds. Calibration of x-ray and gamma-ray measuring instruments. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Calibration of measuring equipment"

1

Sparrer, G., and A. Abou-Zeid. "Uncertainty Analysis of the PTB Measuring Equipment for the Investigation of Laser Interferometers." In Nanoscale Calibration Standards and Methods. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527606661.ch26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fakić, Belma, Samir Lemeš, Branka Muminović, Omer Beganović, Mustafa Hadžalić, and Kenan Varda. "Calibration of Test and Measuring Equipment in Pandemic Conditions." In New Technologies, Development and Application VI. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-31066-9_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Xiang, Yang Li, Ziqi Zhou, Xueyuan Lv, Philip F. Yuan, and Lei Chen. "Levelling Calibration and Intelligent Real-Time Monitoring of the Assembly Process of a DfD-Based Prefabricated Structure Using a Motion Capture System." In Computational Design and Robotic Fabrication. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8637-6_45.

Full text
Abstract:
AbstractConventional measuring techniques and equipment such as the level and total-station are commonly used in on-site construction to measure the position of building elements. However, a motion capture system can measure the dynamic 3D movements of markers attached to any target structure with high accuracy and high sampling rate. Considering the characteristics of prefabricated structures that is composed by lot of discrete building elements, advanced requirements for the on-site assembly monitoring is required. This paper introduces an innovative real-time monitoring technique for the Df
APA, Harvard, Vancouver, ISO, and other styles
4

Weik, Martin H. "measuring equipment." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_11265.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tooley, Mike, and David Wyatt. "Distance measuring equipment." In Aircraft Communications and Navigation Systems, 3rd ed. Routledge, 2024. http://dx.doi.org/10.1201/9781003411932-11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Weik, Martin H. "distance measuring equipment." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_5371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Skomal, Edward N., and Albert A. Smith. "Receiving Equipment." In Measuring the Radio Frequency Environment. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-011-7059-8_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Green, David, and Glyn Howatson. "Equipment maintenance and calibration standards." In Sport and Exercise Physiology Testing Guidelines: Volume I – Sport Testing, 5th ed. Routledge, 2022. http://dx.doi.org/10.4324/9781003045281-13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Weik, Martin H. "error rate measuring equipment." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_6431.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Brinner, Andreas. "Improvements in Measuring Equipment." In The IEA/SSPS Solar Thermal Power Plants — Facts and Figures— Final Report of the International Test and Evaluation Team (ITET). Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-82684-9_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Calibration of measuring equipment"

1

Kajanek, Pavol, Richard Honti, Alojz Kopacik, Jan Erdelyi, and Peter Kyrinovic. "CALIBRATION OF MEASURING TAPES." In 24th SGEM International Multidisciplinary Scientific GeoConference 2024. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/2.1/s09.23.

Full text
Abstract:
Due to usage, handling, and improper storage, measuring tapes undergo changes in their condition over time. For this reason, regular inspection is necessary to ensure the desired quality of results, aiming to verify the accuracy of the tape and its usability in practice. During the calibration of measuring tapes, the position of the scale divisions on the tape is evaluated using a device known as a horizontal comparator. This device consists of a linear base on which a carriage with evaluating equipment, in our case a camera, is automatically moved. The position of the carriage movement is mea
APA, Harvard, Vancouver, ISO, and other styles
2

Fletcher, J. F., and D. Leonard. "New Developments in Surface Profile Measurement for Blast Cleaned Surfaces." In SSPC 2013 Greencoat. SSPC, 2013. https://doi.org/10.5006/s2013-00020.

Full text
Abstract:
Abstract When protective coatings are to be applied to structures, it is important that the surface is clean and dry if premature failure of the coating is to be prevented and the full coating service life achieved. In many situations for both new build and repair of structures, blast cleaning of the surface is required to remove contamination and to create an anchor pattern to enhance the adhesion of the coating system to the substrate. The measurement of the profile is important in achieving the specification but also to ensure that the blast cleaning process is in control and not producing
APA, Harvard, Vancouver, ISO, and other styles
3

Kupke, Renate, Philip M. Hinz, Daren Dillon, et al. "The calibration and verification equipment (CAVE) for KASM." In Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI, edited by Ramón Navarro and Ralf Jedamzik. SPIE, 2024. http://dx.doi.org/10.1117/12.3020821.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bachmair, H. "Supervision of measuring equipment by accredited laboratories: a quality system element." In IEE Colloquium on the Contribution of Instrument Calibration to Product Quality. IEE, 1996. http://dx.doi.org/10.1049/ic:19960628.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Feng, Renjian, Ruoyan Xing, Yinfeng Wu, and Ning Yu. "A Condition-Based Calibration Method for Flight Test Measuring Equipment." In 2020 International Conference on Sensing, Measurement & Data Analytics in the era of Artificial Intelligence (ICSMD). IEEE, 2020. http://dx.doi.org/10.1109/icsmd50554.2020.9261747.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mihm, Gerhard. "Standard for Calibration Intervals." In NCSL International Workshop & Symposium. NCSL International, 2015. http://dx.doi.org/10.51843/wsproceedings.2015.08.

Full text
Abstract:
German Armed Forces had been tasked by International Military Metrology Conference (IMMC) to draft Annex C (Regulations for setting up Calibration Intervals) to the existing Standardization Agreement (STANAG) for Calibration Documentation (STANAG 4704). Setting up the calibration interval is mandatory according to ISO 10012 and ISO 9001:2008. ILAC-G24 is the guideline for the determination of calibration intervals of measuring instruments, IEC-IECEE 2007 OP-AAG010-Ed.1.1 2005-12-09 provides basic information for setting up calibration intervals for test equipment. Both standards refer to RP-1
APA, Harvard, Vancouver, ISO, and other styles
7

Zhizhong Zhao, Liguo Ma, and Jingyuan Wang. "Self-calibration method of vacuum level measuring sensors in vacuum switching." In 2011 1st International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2011. http://dx.doi.org/10.1109/icepe-st.2011.6122980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gerloff, T., L. Ulm, P. Sperfeld, and A. Sperling. "AN OVERVIEW OF IMPORTANT FACTORS TO CONSIDER WHEN CALIBRATING LEDS IN PHOTOMETRY WITH DIFFERENT DETECTORS." In CIE 2021 Conference. International Commission on Illumination, CIE, 2021. http://dx.doi.org/10.25039/x48.2021.op13.

Full text
Abstract:
LED-based lighting products are the fastest developing light sources on the general lighting market. These include not only white light sources, but also coloured light sources. SI-traceable calibrations with a low measurement uncertainty are challenging because their unique spectral and geometric properties must be taken into account. The requirements on the measuring equipment and resulting uncertainty contributions differ significantly from those for the calibration of conventional incandescent or fluorescent light sources. Furthermore, different detector types can be used when calibrating
APA, Harvard, Vancouver, ISO, and other styles
9

Mihm, Gerhard. "Using SAP Business Management Software to Manage Test & Measuring Equipment." In NCSL International Workshop & Symposium. NCSL International, 2014. http://dx.doi.org/10.51843/wsproceedings.2014.53.

Full text
Abstract:
SAP is a well-known name in the business management software market. The German Armed Forces Calibration Service uses SAP for more than two years now. Announced as “a perfect business solution”, SAP first turned out to be a nightmare and finally became a useable tool •with advantages and disadvantages, too. The presentation will give an overview over the experiences made. It will include the idea behind the system, show en detail how every single piece of test- and measurement equipment • known as “equipment” or “equi” - has to be set up in the system, explains how service plans and on-time no
APA, Harvard, Vancouver, ISO, and other styles
10

Naumović-Vuković, Dragana. "Development of measuring equipment for current transformers accuracy testing at the Nikola Tesla Institute." In Tesla Innovation Days (2024, Belgrade). Institute of Electrical Engineering Nikola Tesla, Belgrade, 2024. http://dx.doi.org/10.5937/tid24060n.

Full text
Abstract:
Measuring current transformers are an important and inevitable element of AC current measurement techniques. They have been in use for more than a century. In parallel with the development of technical characteristics and improvement of current transformers, the measuring methods and equipment developed too. The measurement accuracy is the most important characteristic of measuring current transformers, since that is the important factor in the accurate billing of electricity. The tradition in the field of testing current transformer's accuracy at the Nikola Tesla Institute of Electrical Engin
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Calibration of measuring equipment"

1

Tuenge, Jason R., and Michael E. Poplawski. Specifying Calibration of Energy-Measuring Equipment. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1616176.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tuenge, Jason, and Michael Poplawski. Specifying Calibration of Energy-Measuring Equipment. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1618037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Taylor. L51578 Drop-Weight-Tear-Test Equipment Energy Calibration Program. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0010096.

Full text
Abstract:
The Drop-Weight-Tear-Test (DWTT) energy absorption has not previously been considered as a measure of fracture toughness from this test. The DWTT was originally planned to define the fracture appearance transition temperature of line pipe. The test has been very successfully used for this purpose for the past 20 years. During this period of DWTT usage, the need for a toughness measurement to control ductile fracture propagation has seen the application of a Charpy shelf-energy in addition to a DWTT or Charpy shear area requirement in the specification of line-pipe properties. The purpose of ex
APA, Harvard, Vancouver, ISO, and other styles
4

Ohring, George, Bruce Wielicki, Roy Spencer, Bill Emery, and Raju Datla. Satellite instrument calibration for measuring global climate change. National Institute of Standards and Technology, 2004. http://dx.doi.org/10.6028/nist.ir.7047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Demint, P. D., and M. Abraham. The development of straightness measuring equipment. Final report. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/525005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lamperti, Paul J., and Michelle O'Brien. Calibration of x-ray and gamma-ray measuring instruments. National Institute of Standards and Technology, 2001. http://dx.doi.org/10.6028/nist.sp.250-58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lamperti, Paul J., Thomas P. Loftus, and Robert Loevinger. Calibration of x-ray and gamma-ray measuring instruments. National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nbs.sp.250-16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wenz, T. R., H. O. Menlove, G. WSalton, and J. Baca. Design and calibration of the AWCC for measuring uranium hexafluoride. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/100037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Petersons, Oskars. Calibration of test systems for measuring power losses of transformers. National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.tn.1204.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Osterlund, S. E. A new test site for the calibration of geophysical equipment. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/123602.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Calibration of measuring equipment' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography