To see the other types of publications on this topic, follow the link: Calorimeter.

Journal articles on the topic 'Calorimeter'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Calorimeter.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Dunne, K., B. Meirose, D. Milstead, et al. "The HIBEAM/NNBAR Calorimeter Prototype." Journal of Physics: Conference Series 2374, no. 1 (2022): 012014. http://dx.doi.org/10.1088/1742-6596/2374/1/012014.

Full text
Abstract:
The HIBEAM/NNBAR experiment is a free-neutron search for n → sterile n and n → n ¯ oscillations planned to be installed at the European Spallation Source under construction in Lund, Sweden. A key component in the experiment is the detector to identify n – n ¯ annihilation events, which will produce on average four pions with a final state invariant mass of two nucleons, around 1.9 GeV. The beamline and experiment are shielded from magnetic fields which would suppress n → n ¯ transitions, thus no momentum measurement will be possible. Additionally, calorimetry for particles with kinetic energie
APA, Harvard, Vancouver, ISO, and other styles
2

Amanda, Y., D. Aswan, and F. A. Kurniawan. "Pengujian Nilai LHV Bahan Bakar Bio Ethanol Tebu dan Pertalite Dengan Menggunakan Data Aquisisi Micro Kontroller Admel 2560." Jurnal MESIL (Mesin Elektro Sipil) 2, no. 2 (2021): 7–15. http://dx.doi.org/10.53695/jm.v2i2.554.

Full text
Abstract:
Heat is defined as the heat energy possessed by a substance. In general, to detect the presence of heat possessed by an object that is by measuring the temperature of the object. Measurement of the amount of heat of reaction absorbed or released in a chemical reaction by experiment is called calorimetry. While the tool used to measure the amount of heat or calorific value released is a calorimeter. There are two types of calorimeters, namely bomb calorimeters and solution calorimeters. Bomb calorimeter serves as a tool to measure the number of calories or the calorific value of fuels such as b
APA, Harvard, Vancouver, ISO, and other styles
3

Takeshita, Tohru, and Reima Terada. "Development of a New Type of Sandwich Calorimeter with Lead-Glass and Glass-Scintillator." EPJ Web of Conferences 320 (2025): 00065. https://doi.org/10.1051/epjconf/202532000065.

Full text
Abstract:
We present a calorimeter optimized for a Higgs factory, featuring both high energy resolution for jets and an ultra-fine structure compatible with Particle Flow Algorithms (PFA). This design enhances the identification of the parent particle of the jet. Simulations indicate that high energy resolution can be achieved by concurrently measuring scintillation light and Cherenkov light, leveraging their correlation. We propose this type of the calorimeter as an economical calorimeter with high radiation resistance. Unlike conventional hadron calorimeters, which typically have a resolution worse th
APA, Harvard, Vancouver, ISO, and other styles
4

Brient, J. C., R. Rusack, and F. Sefkow. "Silicon Calorimeters." Annual Review of Nuclear and Particle Science 68, no. 1 (2018): 271–90. http://dx.doi.org/10.1146/annurev-nucl-101917-021053.

Full text
Abstract:
We review the development of silicon-based calorimeters from the very first applications of small calorimeters used in collider experiments to the large-scale systems that are being designed today. We discuss silicon-based electromagnetic calorimeters for future e− e+ colliders and for the upgrade of the CMS experiment's endcap calorimeter to be used in the high-luminosity phase of the LHC. We present the intrinsic advantages of silicon as an active detector material and highlight the enabling technologies that have made calorimeters with very high channel densities feasible. We end by discuss
APA, Harvard, Vancouver, ISO, and other styles
5

Aisyah, Nur, Alex Harijanto, and Lailatul Nuraini. "RANCANG BANGUN ALAT PRAKTIKUM KALORIMETER COFFEE-CUP PENGUKUR KALOR JENIS BERBANTUAN ARDUINO UNO." JURNAL PEMBELAJARAN FISIKA 11, no. 1 (2022): 41. http://dx.doi.org/10.19184/jpf.v11i1.28075.

Full text
Abstract:
Practical activities are a series of activities carried out to apply skills or practice something that requires practical tools in its implementation. The purpose of using practical tools is to meet the needs of practitioners in carrying out a process. One of the physics concepts that can be explained through practical activities is calorimetry. Specific heat is one of the observations made during the practicum using a calorimeter. The specific heat of the material is usually measured using a coffee-cup calorimeter manually. The obstacle faced by the practitioner during the calorimetry practic
APA, Harvard, Vancouver, ISO, and other styles
6

Torales Acosta, Fernando, Vinicius Mikuni, Benjamin Nachman, et al. "Comparison of point cloud and image-based models for calorimeter fast simulation." Journal of Instrumentation 19, no. 05 (2024): P05003. http://dx.doi.org/10.1088/1748-0221/19/05/p05003.

Full text
Abstract:
Abstract Score based generative models are a new class of generative models that have been shown to accurately generate high dimensional calorimeter datasets. Recent advances in generative models have used images with 3D voxels to represent and model complex calorimeter showers. Point clouds, however, are likely a more natural representation of calorimeter showers, particularly in calorimeters with high granularity. Point clouds preserve all of the information of the original simulation, more naturally deal with sparse datasets, and can be implemented with more compact models and data files. I
APA, Harvard, Vancouver, ISO, and other styles
7

Meis, S. J., E. L. Dove, E. F. Bell, et al. "A gradient-layer calorimeter for measurement of energy expenditure of infants." American Journal of Physiology-Regulatory, Integrative and Comparative Physiology 266, no. 3 (1994): R1052—R1060. http://dx.doi.org/10.1152/ajpregu.1994.266.3.r1052.

Full text
Abstract:
We have developed and validated a gradient-layer calorimeter for direct measurement of energy expenditure of preterm infants. Infant calorimeters must be operated and tested differently from adult calorimeters, because the calorimeter must be warmed during operation to limit heat loss from the infant, the calorimeter wall temperature (which is selected on the basis of the infant's maturity) must be precisely controlled, and energy expenditure (heat output) is typically < 10 W. We calibrated our calorimeter by varying the heat produced by a dry source (manikin or light bulb) with airflow (n
APA, Harvard, Vancouver, ISO, and other styles
8

Furetta, C., S. Pensotti, P. Rancoita, L. Vismara, G. Barbiellini, and A. Seidman. "Large-area sandwich calorimeter for hadronic calorimetry." IEEE Transactions on Nuclear Science 35, no. 1 (1988): 446–50. http://dx.doi.org/10.1109/23.12762.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Amendola, Chiara. "An overview of the CMS High-Granularity Calorimeter." Journal of Instrumentation 20, no. 01 (2025): C01031. https://doi.org/10.1088/1748-0221/20/01/c01031.

Full text
Abstract:
Abstract Calorimetry at the High-Luminosity LHC (HL-LHC) faces many challenges, particularly in the forward direction, such as radiation tolerance and large in-time event pileup. To meet these challenges, the CMS Collaboration is preparing to replace its current endcap calorimeters for the HL-LHC era with a High-Granularity Calorimeter (HGCAL), featuring an unprecedented transverse and longitudinal segmentation, for both the electromagnetic and hadronic sectors, with 5D information (space-time-energy) read out. The proposed design uses silicon sensors for the electromagnetic section and high-i
APA, Harvard, Vancouver, ISO, and other styles
10

Mullisen, R. S. "Thermal Engineering Design Project: A Calorimeter That Measures the Specific Heat of Aluminum." International Journal of Mechanical Engineering Education 31, no. 1 (2003): 63–75. http://dx.doi.org/10.7227/ijmee.31.1.4.

Full text
Abstract:
A thermal engineering design project requiring the design, construction, and operation of a calorimeter that measures the specific heat of aluminum was assigned to a class of third-year mechanical engineering students. Before making the assignment, the author developed his own design, which consisted of two individual calorimeters — each an assembly of 13 aluminum plates with electric resistance heater wires laced between the plates. The exterior surfaces of both calorimeters and the surrounding insulation were identical. However, the interior plates were different — one calorimeter had solid
APA, Harvard, Vancouver, ISO, and other styles
11

Onel, Y., J. Wetzel, B. Bilki, et al. "Q-Wall, a Novel Quartz-Cherenkov Calorimeter Concept." EPJ Web of Conferences 320 (2025): 00006. https://doi.org/10.1051/epjconf/202532000006.

Full text
Abstract:
Future collider experiments and the upgrade of the existing large-scale experiments impose unprece-dented radiation conditions for the calorimeter systems, particularly in the forward region. The calorimeters envisaged for these operating conditions must be sufficiently radiation-hard and robust in order to perform as expected for the entire lifetime of the experiments. In this context, a novel calorimeter design utilizing quartz-Cherenkov calorimetry, termed Q-Wall has been developed. The Q-Wall concept is a sampling calorimeter that alternates between plates of absorber (Fe, Pb, W, etc.) and
APA, Harvard, Vancouver, ISO, and other styles
12

Burova, Zinaida, Maksym Gudzenko, Leonid Vorobiov, and Andrii Makeev. "Methods and devices for researching the energy value of food products." Human and nation's health, no. 2 (December 29, 2023): 34–55. http://dx.doi.org/10.31548/humanhealth.2.2023.34.

Full text
Abstract:
Rational nutrition is the main factor in ensuring optimal physical and mental health of a person. The balanced diet development requires reliable information about the nutritional and energy value of raw materials, semi-finished products, and ready-made food products and dishes. Determining the energy value of food products is carried out in several ways: chemical, taking into account the caloric content of individual components, the amount of which requires preliminary determination, calculation, and tabulation according to normative and technical averaged parameters, and experimental method
APA, Harvard, Vancouver, ISO, and other styles
13

Mlynarikova, Michaela. "Design and performance of the calorimeter system for ALLEGRO FCC-ee detector concept." EPJ Web of Conferences 320 (2025): 00022. https://doi.org/10.1051/epjconf/202532000022.

Full text
Abstract:
The future circular electron-positron collider (FCC-ee) will be a unique precision instrument designed to o↵er great direct and indirect sensitivity to new physics. Its primary purpose will be to study the heaviest known particles (Z, W, and H bosons and the top quark) with unprecedented precision, a goal that introduces multiple challenges in the detector design. Key requirements for the detector include excellent energy and angular resolution coupled with strong particle identification capabilities. One of the proposed experiments for FCC-ee is ALLEGRO, a general-purpose detector concept tha
APA, Harvard, Vancouver, ISO, and other styles
14

Mastrolorenzo, L. "The CMS High Granularity Calorimeter for HL-LHC." International Journal of Modern Physics: Conference Series 46 (January 2018): 1860075. http://dx.doi.org/10.1142/s2010194518600753.

Full text
Abstract:
The High Luminosity LHC (HL-LHC) will integrate 10 times more luminosity than the LHC, posing significant challenges for radiation tolerance and event pileup on detectors, especially for forward calorimetry, and hallmarks the issue for future colliders. As part of its HL-LHC upgrade program, the CMS Collaboration is designing a High Granularity Calorimeter (HGCAL) to replace the existing endcap calorimeters. It features unprecedented transverse and longitudinal segmentation for both electromagnetic (CE-E) and hadronic (CE-H) compartments. This will facilitate particle-flow (PF) calorimetry, wh
APA, Harvard, Vancouver, ISO, and other styles
15

Schoffelen, P. F. M., and G. Plasqui. "Classical experiments in whole-body metabolism: open-circuit respirometry—diluted flow chamber, hood, or facemask systems." European Journal of Applied Physiology 118, no. 1 (2017): 33–49. http://dx.doi.org/10.1007/s00421-017-3735-5.

Full text
Abstract:
AbstractFor over two centuries, scientists have measured gas exchange in animals and humans and linked this to energy expenditure of the body. The aim of this review is to provide a comprehensive overview of open-circuit diluted flow indirect calorimetry and to help researchers to make the optimal choice for a certain system and its application. A historical perspective shows that ‘open circuit diluted flow’ is a technique first used in the 19th century and applicable today for room calorimeters, ventilated hood systems, and facemasks. Room calorimeters are a classic example of an open-circuit
APA, Harvard, Vancouver, ISO, and other styles
16

Kamiyama, Taiki, James Freeman, Corrado Gatto, et al. "Development of High-Granularity Dual-Readout Calorimetry with psec Timing." EPJ Web of Conferences 320 (2025): 00064. https://doi.org/10.1051/epjconf/202532000064.

Full text
Abstract:
Dual-readout and particle flow algorithm (PFA) are technologies proposed for precise jet energy measurement in future colliders. While PFA requires highly granular calorimeters, dual-readout has mainly been used with fiber-based calorimeters that do not have highly segmented capabilities. It is still non-trivial to combine these two technologies in one calorimeter system because of the use of fibers in most of the dualreadout calorimeters, which is not compatible with the high granularity requirement of PFA technologies. The aim of this study is to develop a novel calorimetry that combines dua
APA, Harvard, Vancouver, ISO, and other styles
17

Ishii, Junichi, Taiki Nakamura, and Osamu Nakabeppu. "F132 Fast Scanning Calorimetry with MEMS Chip Calorimeter." Proceedings of the Thermal Engineering Conference 2012 (2012): 187–88. http://dx.doi.org/10.1299/jsmeted.2012.187.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Korbel, V. "Liquid argon calorimetry at HERA, the H1 calorimeter." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 263, no. 1 (1988): 70–77. http://dx.doi.org/10.1016/0168-9002(88)91019-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Zhang, J., B. Edwards, M. Juda, et al. "Observing Soft X-ray Line Emission from the Interstellar Medium with X-ray Calorimeter on a Sounding Rocket." International Astronomical Union Colloquium 115 (1990): 361–64. http://dx.doi.org/10.1017/s0252921100012586.

Full text
Abstract:
AbstractWe have been developing X-ray calorimeters that have high spectral resolution and high quantum efficiency. For an X-ray calorimeter working at 0.1 K, the energy resolution ideally can be as good as one eV for a practical detector. A detector with a resolution of 17 eV FWHM at 6 keV has been constructed. We expect to be able to improve this by a factor of two or more. With X-ray calorimeters flown on a sounding rocket, we should be able to observe soft X-ray line emission from the interstellar medium over the energy range 0.07 to 1 keV. Here we present a preliminary design for an X-ray
APA, Harvard, Vancouver, ISO, and other styles
20

Loeschcke Centeno on behalf of the IDEA Dual-Readout, Andreas. "Energy Resolution Studies in Simulation for the IDEA Dual-Readout Calorimeter Prototype." Instruments 6, no. 4 (2022): 44. http://dx.doi.org/10.3390/instruments6040044.

Full text
Abstract:
Precision measurements of Z, W, and H decays at the next generation of circular lepton colliders will require excellent energy resolution for both electromagnetic and hadronic showers. The resolution is limited by event-to-event fluctuations in the shower development, especially in the hadronic system. Compensating for this effect can greatly improve the achievable energy resolution. Furthermore, the resolution can benefit greatly from the use of particle-flow algorithms, which requires the calorimeters to have a high granularity. The approach of dual-readout calorimetry has emerged as a candi
APA, Harvard, Vancouver, ISO, and other styles
21

Morange, Nicolas. "Noble Liquid Calorimetry for FCC-ee." Instruments 6, no. 4 (2022): 55. http://dx.doi.org/10.3390/instruments6040055.

Full text
Abstract:
Noble liquid calorimeters have been successfully used in particle physics experiments for decades. The project presented in this article is that of a new noble liquid calorimeter concept, where a novel design allows us to fulfil the stringent requirements on calorimetry of the physics programme of the electron-positron Future Circular Collider at CERN. High granularity is achieved through the design of specific readout electrodes and high-density cryostat feedthroughs. Excellent performance can be reached through new very light cryostat design and low electronics noise. Preliminary promising p
APA, Harvard, Vancouver, ISO, and other styles
22

Prysyazhnyuk, Lyudmila, Ihor Petryshyn, Bohdan Dolishnii, and Liubomyr Ropyak. "A portable calorimeter for measuring the calorific value of natural gas." Ukrainian Metrological Journal, no. 3 (September 29, 2021): 58–65. http://dx.doi.org/10.24027/2306-7039.3.2021.241253.

Full text
Abstract:
Abstract
 Natural gas quality assessment is a relevant issue. A critical analysis of calorimeter designs for measuring the calorific value of natural gas was carried out. The most common methods for determining the calorific value of natural gas are as follows: direct by gas calorimeters; indirect by gas chromatographs; indirect, based on correlations. The advantages of isoperibolic calorimeters of measuring calorific value of natural gas directly in the consumer’s conditions are substantiated. The design of a portable calorimeter containing a thermostated shell, calorimetric tank, Peltie
APA, Harvard, Vancouver, ISO, and other styles
23

Seale, James L., and William V. Rumpler. "Synchronous direct gradient layer and indirect room calorimetry." Journal of Applied Physiology 83, no. 5 (1997): 1775. http://dx.doi.org/10.1152/jappl.1997.83.5.1775.

Full text
Abstract:
Rumpler, James L., and William V. Seale. Synchronous direct gradient layer and indirect room calorimetry. J. Appl. Physiol. 83(5): 1775–1781, 1997.—A dual direct/indirect room-sized calorimeter is used at the Beltsville Human Nutrition Research Center to measure heat emission and energy expenditure in humans. Because the response times of a gradient layer direct calorimeter and an indirect calorimeter are not equivalent, the respective rate of heat emission and energy expenditure cannot be directly compared. A system of equations has been developed and tested that can correct the respective ou
APA, Harvard, Vancouver, ISO, and other styles
24

Akgün, Bora. "An Overview of the CMS High Granularity Calorimeter." Particles 8, no. 1 (2025): 4. https://doi.org/10.3390/particles8010004.

Full text
Abstract:
Calorimetry at the High Luminosity LHC (HL-LHC) faces many challenges, particularly in the forward direction, such as radiation tolerance and large in-time event pileup. To meet these challenges, the CMS Collaboration is preparing to replace its current endcap calorimeters from the HL-LHC era with a high-granularity calorimeter (HGCAL), featuring an unprecedented transverse and longitudinal segmentation, for both the electromagnetic and hadronic compartments, with 5D information (space–time–energy) read out. The proposed design uses silicon sensors for the electromagnetic section (with fluence
APA, Harvard, Vancouver, ISO, and other styles
25

Galliez, Kévin, Guillaume Jossens, Alain Godot, and Christophe Mathonat. "Characterization of Low Level Wastes: a new design for calorimetric measurement." EPJ Web of Conferences 170 (2018): 07003. http://dx.doi.org/10.1051/epjconf/201817007003.

Full text
Abstract:
Calorimetry is one of the best solutions to estimate the overall quantity of nuclear material on a wide range of masses, from a few milligrams up to kilograms of radionuclides, by measuring the overall thermal power due to the radioactive decay coming from the waste contained in a metallic drum or a different type of container. It has many advantages as it features a non-destructive method which remains independent of matrix effect or the chemical composition. Until now, calorimetry allows to measure at the lowest 0.5 to 1 mW for samples up to 385 liters. But nowadays, thanks to new technologi
APA, Harvard, Vancouver, ISO, and other styles
26

MANDELLI, LUCIANO. "THE ATLAS ELECTROMAGNETIC CALORIMETERS: FEATURES AND PERFORMANCE." International Journal of Modern Physics A 25, no. 09 (2010): 1739–60. http://dx.doi.org/10.1142/s0217751x10049323.

Full text
Abstract:
In this paper it is shown how a sampling electromagnetic calorimeter based on the liquid argon technique satisfies the very demanding requirements of an experiment at the LHC. Section 2 discusses, using a simplified model, the performance that can be achieved in terms of response time, energy resolution and transverse granularity. Section 3 describes how the calorimeters are realized in ATLAS, their segmentation and how from the readout pulses the energy deposited in the calorimeter is computed. The motivations of a presampler detector in front of the calorimeter are also discussed. Section 4
APA, Harvard, Vancouver, ISO, and other styles
27

Zhang, Shizhong, Qiu Wang, Jinping Li, Xiaoyuan Zhang, and Hong Chen. "A Fast-Response Calorimeter with Dynamic Corrections for Transient Heat Transfer Measurements." Applied Sciences 10, no. 17 (2020): 6143. http://dx.doi.org/10.3390/app10176143.

Full text
Abstract:
Robust fast-response transient calorimeters with novel calorimeter elements have attracted the attention of researchers as new synthetic materials have been developed. This sensor uses diamonds as the calorimeter element, and a platinum film resistance is sputtered on the back to measure the temperature. The surface heat flux is obtained based on the calorimetric principle. The sensor has the advantages of high sensitivity and not being prone to erosion. However, non-ideal conditions, such as heat dissipation from the calorimeter element to the surroundings, can lead to measurement deviation a
APA, Harvard, Vancouver, ISO, and other styles
28

LIN, SHIH-CHING, CHING-HSING LUO, and TSU-FUH YEH. "IMPROVE ON PERFORMANCE OF INDIRECT CALORIMETRY FOR SMALL PRETERM INFANTS." Biomedical Engineering: Applications, Basis and Communications 13, no. 03 (2001): 109–15. http://dx.doi.org/10.4015/s1016237201000145.

Full text
Abstract:
An indirect calorimetry system of measuring oxygen consumption and carbon dioxide production has been frequently used for preterm infants. The energy consumption and metabolic measurements are based on flow-through technology. The noninvasive measurement feature of the indirect calorimeter is widely used in pediatric clinical research. However, the indirect calorimeter has several limitations for small preterm infants, particularly the ill infant weighing < 1.0 kg. In this paper, we propose some technologies and methodologies to improve the performance of the indirect calorimetry. According
APA, Harvard, Vancouver, ISO, and other styles
29

Frede, Timothy Aljoscha, Moritz Greive, and Norbert Kockmann. "Measuring Kinetics in Flow Using Isoperibolic Flow Calorimetry." Reactions 3, no. 4 (2022): 525–36. http://dx.doi.org/10.3390/reactions3040035.

Full text
Abstract:
Continuous flow calorimeters are a promising tool in process development and safety engineering, particularly for flow chemistry applications. An isoperibolic flow calorimeter is presented for the characterization of exothermic reactions. The calorimeter is adapted to commercially available plate microreactors made of glass and uses Seebeck elements to quantify the heat of reaction. For automation of calibration procedures and calorimetric measurements, the device is connected to a lab automation system. Reaction enthalpy of exothermic reactions is determined via an energy balance of the entir
APA, Harvard, Vancouver, ISO, and other styles
30

Ceravolo, S., F. Colao, C. Curatolo, et al. "Crilin: A CRystal calorImeter with Longitudinal InformatioN for a future Muon Collider." Journal of Instrumentation 17, no. 09 (2022): P09033. http://dx.doi.org/10.1088/1748-0221/17/09/p09033.

Full text
Abstract:
Abstract The measurement of physics processes at new energy frontier experiments requires excellent spatial, time, and energy resolutions to resolve the structure of collimated high-energy jets. In a future Muon Collider, the beam-induced backgrounds (BIB) represent the main challenge in the design of the detectors and of the event reconstruction algorithms. The technology and the design of the calorimeters should be chosen to reduce the effect of the BIB, while keeping good physics performance. Several requirements can be inferred: i) high granularity to reduce the overlap of BIB particles in
APA, Harvard, Vancouver, ISO, and other styles
31

Borysov, Oleksandr, Shan Huang, Kamil Zembaczyński, and Aleksander Filip Żarnecki. "Longitudinal structure optimization for a high density electromagnetic calorimeter." EPJ Web of Conferences 315 (2024): 03006. https://doi.org/10.1051/epjconf/202431503006.

Full text
Abstract:
High density electromagnetic sandwich calorimeters with high readout granularity are considered for many future colliders and fix-target experiments. Optimization of the calorimeter structure from the point of view of the electromagnetic shower energy, position and direction measurement is one of the key aspects of the design. However, mostly uniform sampling structures were considered so far. We developed a semi-analytical approach to study calorimeter performance based on the detailed Geant 4 simulation, which also allows comparing the expected performance for different non-uniform longitudi
APA, Harvard, Vancouver, ISO, and other styles
32

Cantone, C., S. Ceravolo, F. Colao, et al. "R&D status for an innovative crystal calorimeter for the future Muon Collider." EPJ Web of Conferences 288 (2023): 02002. http://dx.doi.org/10.1051/epjconf/202328802002.

Full text
Abstract:
The measurement of physics processes at new energy frontier experiments requires excellent spatial, time, and energy resolutions to resolve the structure of collimated high-energy jets. Calorimeters, as other detectors, must face this increasing performance demand. In a future TeV-scale Muon Collider, the beam-induced background (BIB) represents the main challenge in the design of the detectors and of the event reconstruction algorithms and can pose serious limitations to the physics performance. However, it is possible to reduce the BIB impact on the Muon Collider calorimeter by exploiting so
APA, Harvard, Vancouver, ISO, and other styles
33

Rojas-Aguilar, Aarón, and Alejandro Valdés-Ordoñez. "Micro-combustion calorimetry employing a Calvet heat flux calorimeter." Journal of Chemical Thermodynamics 36, no. 7 (2004): 619–26. http://dx.doi.org/10.1016/j.jct.2004.04.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Rohmawati, Lydia, Woro Setyarsih, and Nugrahani Primary Putri. "PEMBUATAN KIT SEDERHANA KALORIMETER DARI BAHAN BEKAS BAGI GURU IPA FISIKA." Jurnal ABDI 4, no. 2 (2019): 79. http://dx.doi.org/10.26740/ja.v4n2.p79-84.

Full text
Abstract:
Students are actively demanded such as observing, asking questions, collecting data, associating, and communicating mainly in science learning. However, laboratory facilities in South Surabaya Middle School are known incomplete and some do not even have a laboratory, so as the teacher gives the material using the lecture method. One of the science materials is thermodynamics, especially with regard to calorimeter devices, whose application is about Black Principle. The calorimeter equipment on the market is very expensive, so it is necessary to conduct training and assistance on making simple
APA, Harvard, Vancouver, ISO, and other styles
35

Torales Acosta, Fernando, Bishnu Karki, Piyush Karande, et al. "The optimal use of segmentation for sampling calorimeters." Journal of Instrumentation 19, no. 06 (2024): P06002. http://dx.doi.org/10.1088/1748-0221/19/06/p06002.

Full text
Abstract:
Abstract One of the key design choices of any sampling calorimeter is how fine to make the longitudinal and transverse segmentation. To inform this choice, we study the impact of calorimeter segmentation on energy reconstruction. To ensure that the trends are due entirely to hardware and not to a sub-optimal use of segmentation, we deploy deep neural networks to perform the reconstruction. These networks make use of all available information by representing the calorimeter as a point cloud. To demonstrate our approach, we simulate a detector similar to the forward calorimeter system intended f
APA, Harvard, Vancouver, ISO, and other styles
36

Kay, Ellis. "Commissioning the ATLAS Liquid Argon Calorimeter Phase-I Upgrade." EPJ Web of Conferences 253 (2021): 01007. http://dx.doi.org/10.1051/epjconf/202125301007.

Full text
Abstract:
Liquid argon (LAr) sampling calorimeters are employed by ATLAS for all electromagnetic calorimetry in the pseudo-rapidity region η < 3.2, and for hadronic and forward calorimetry in the region from η = 1.5 to η = 4.9. In the first LHC run (Run-1), a total luminosity of around 26 fb-1 was collected at centre-of-mass energies of 7-8 TeV. After detector consolidation during a long shut-down, Run-2 started in 2015 and around 150 fb-1 of data at a centre-of-mass energy of 13 TeV was recorded. With the end of Run-2 in 2018, a multi-year shutdown for the Phase-I detector upgrades began. As part of
APA, Harvard, Vancouver, ISO, and other styles
37

Yang, Xiaohan, Yuting He, Yuanyi Xie, et al. "Advanced technical assessment of 40 MW large-scale calorimeter in full-scale n-Heptane pool fire testing: Precision measurement and analysis." Journal of Physics: Conference Series 2990, no. 1 (2025): 012002. https://doi.org/10.1088/1742-6596/2990/1/012002.

Full text
Abstract:
Abstract Accurate heat release rate (HRR) measurements are essential for characterizing fire safety in various engineering structures or buildings, particularly in high-risk environments such as railway vehicles and warehouses. In this study, a large-scale calorimeter was developed for high-intensity fires up to 40 MW, tailored for validating full-scale fire tests in the railway vehicle and warehouse industries. Cold and hot flow field calibrations were conducted using n-heptane pool fires to assess the calorimeter’s performance and accuracy. Results from the cold flow calibration revealed tha
APA, Harvard, Vancouver, ISO, and other styles
38

Aydın, G. "Simulation Study for the Energy Resolution Performances of Homogenous Calorimeters with Scintillator-Photodetector Combinations." Advances in High Energy Physics 2018 (September 13, 2018): 1–11. http://dx.doi.org/10.1155/2018/4791509.

Full text
Abstract:
The scintillating properties of active materials used in high energy and particle physics experiments play an important role regarding the performances of both calorimeters and experiments. Two scintillator materials, a scintillating glass and an inorganic crystals, were examined to be used for collider experiments showing good optical and scintillating properties. This paper discusses the simulated performances of two materials of interest assembled in a scintillator-photodetector combination. The computational study was carried out with Geant4 simulation program to determine energy resolutio
APA, Harvard, Vancouver, ISO, and other styles
39

Quast, Thorben. "Status and Plans for the CMS High Granularity Calorimeter Upgrade Project." Journal of Physics: Conference Series 2374, no. 1 (2022): 012020. http://dx.doi.org/10.1088/1742-6596/2374/1/012020.

Full text
Abstract:
The CMS Collaboration is preparing to build replacement endcap calorimeters for the HL-LHC era. The new high-granularity calorimeter (HGCAL) is, as the name implies, a highly-granular sampling calorimeter with approximately six million silicon sensor channels (≈1.1cm2 or 0.5 cm2 cells) and about 250 thousand channels of scintillator tiles readout with on-tile silicon photomultipliers. The calorimeter is designed to operate in the harsh radiation environment at the HL-LHC, where the average number of interactions per bunch crossing is expected to exceed 140. Besides measuring energy and positio
APA, Harvard, Vancouver, ISO, and other styles
40

Weise, David R., Robert H. White, Frank C. Beall, and Matt Etlinger. "Use of the cone calorimeter to detect seasonal differences in selected combustion characteristics of ornamental vegetation." International Journal of Wildland Fire 14, no. 3 (2005): 321. http://dx.doi.org/10.1071/wf04035.

Full text
Abstract:
The flammability of living vegetation is influenced by a variety of factors, including moisture content, physical structure and chemical composition. The relative flammability of ornamental vegetation is of interest to homeowners seeking to make their homes ‘fire safe’. The relative importance of the factors influencing fire behaviour characteristics, such as flammability, is unknown. In the present study, oxygen consumption calorimetry was used to obtain selected combustion characteristics of ornamental vegetation. Peak heat release rate, mass loss rate, time to ignition and effective heat of
APA, Harvard, Vancouver, ISO, and other styles
41

Cascella, Michele, Silvia Franchino, and Sehwook Lee. "Fiber and crystals dual readout calorimeters." International Journal of Modern Physics A 31, no. 33 (2016): 1644024. http://dx.doi.org/10.1142/s0217751x16440243.

Full text
Abstract:
The RD52 (DREAM) collaboration is performing R&D on dual readout calorimetry techniques with the aim of improving hadronic energy resolution for future high energy physics experiments. The simultaneous detection of Cherenkov and scintillation light enables us to measure the electromagnetic fraction of hadron shower event-by-event. As a result, we could eliminate the main fluctuation which prevented from achieving precision energy measurement for hadrons. We have tested the performance of the lead and copper fiber prototypes calorimeters with various energies of electromagnetic particles an
APA, Harvard, Vancouver, ISO, and other styles
42

Yang, Haijun. "Preliminary conceptual design about the CEPC calorimeters." International Journal of Modern Physics A 31, no. 33 (2016): 1644026. http://dx.doi.org/10.1142/s0217751x16440267.

Full text
Abstract:
The Circular Electron Positron Collider (CEPC) as a Higgs factory was proposed in September 2013. The preliminary conceptual design report was completed in 2015.1 The CEPC detector design was using International Linear Collider Detector — ILD2 as an initial baseline. The CEPC calorimeters, including the high granularity electromagnetic calorimeter (ECAL) and the hadron calorimeter (HCAL), are designed for precise energy measurements of electrons, photons, taus and hadronic jets. The basic resolution requirements for the ECAL and HCAL are about 16%[Formula: see text][Formula: see text] (GeV) an
APA, Harvard, Vancouver, ISO, and other styles
43

Akchurin, Nural, Christopher Cowden, Jordan Damgov, Adil Hussain, and Shuichi Kunori. "The (Un)reasonable Effectiveness of Neural Network in Cherenkov Calorimetry." Instruments 6, no. 4 (2022): 43. http://dx.doi.org/10.3390/instruments6040043.

Full text
Abstract:
We report a greater than factor of two improvement in the hadronic energy resolution of a simulated Cherenkov calorimeter by estimating the energy with machine learning over traditional techniques. The prompt signal formation and energy threshold properties of Cherenkov radiation provide identifiable features that machine learning techniques can exploit to produce a superior model for energy reconstruction. We simulated a quartz-fiber calorimeter via the GEANT4 framework to study the reconstruction techniques in single events. We compared the machine learning-based reconstruction performance t
APA, Harvard, Vancouver, ISO, and other styles
44

Rebaud, J., A. Volte, M. Carette, A. Lyoussi, and C. Reynard-Carette. "Experimental and numerical results for a new single-cell calorimeter dedicated to nuclear heating rate measurement." EPJ Web of Conferences 288 (2023): 04008. http://dx.doi.org/10.1051/epjconf/202328804008.

Full text
Abstract:
This paper presents the study of a new innovative heat flow single-cell calorimeter dedicated to the measurement of the nuclear heating rate in research reactors. Before irradiating this type of sensor, it is necessary to characterize it under laboratory conditions to determine its metrological properties. A general description (design, geometry and materials nature) of this new calorimeter will be given, focusing on the motivations that led to its development. This part will be followed by a presentation of the experimental set-up and operating protocol used to characterize this sensor. The s
APA, Harvard, Vancouver, ISO, and other styles
45

Bodova, Tea, Johan Alme, Viatcheslav Borshchov, et al. "Design and first experience of the prototype pixel layers for the ALICE FoCal." Journal of Instrumentation 19, no. 01 (2024): C01033. http://dx.doi.org/10.1088/1748-0221/19/01/c01033.

Full text
Abstract:
Abstract The University of Bergen is involved in developing two calorimeters: the pixel section of the Electromagnetic Forward Calorimeter for the ALICE Upgrade to be installed during LS3 for data-taking in the period 2029–2032 and the Digital Tracking Calorimeter for the proton Computed Tomography prototype. Both designs utilize pixel sensors and require a reliable connection to the readout which is positioned approximately 5 meters away. Furthermore, the structural design of these calorimeters calls for a compact layer assembly. This paper provides the strategies deployed to meet these criti
APA, Harvard, Vancouver, ISO, and other styles
46

BROWN, NANCY M. "Armsbyʼs Calorimeter". Nutrition Today 25, № 4 (1990): 7–12. http://dx.doi.org/10.1097/00017285-199007000-00002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Aphecetche, L., T. C. Awes, J. Banning, et al. "PHENIX calorimeter." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 499, no. 2-3 (2003): 521–36. http://dx.doi.org/10.1016/s0168-9002(02)01954-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Maier, Manuel C., Michael Leitner, C. Oliver Kappe, and Heidrun Gruber-Woelfler. "A modular 3D printed isothermal heat flow calorimeter for reaction calorimetry in continuous flow." Reaction Chemistry & Engineering 5, no. 8 (2020): 1410–20. http://dx.doi.org/10.1039/d0re00122h.

Full text
Abstract:
The presented continuous flow calorimeter enables process understanding of novel flow syntheses and the use of highly reactive compounds. Adaptation of the calorimeter is possible via 3D printing and due to its modular and expandable design.
APA, Harvard, Vancouver, ISO, and other styles
49

Viazlo, Oleksandr, and André Sailer. "Efficient Iterative Calibration on the Grid using iLCDirac." EPJ Web of Conferences 245 (2020): 03003. http://dx.doi.org/10.1051/epjconf/202024503003.

Full text
Abstract:
Software tools for detector optimization studies for future experiments need to be efficient and reliable. One important ingredient of the detector design optimization concerns the calorimeter system. Every change of the calorimeter configuration requires a new set of overall calibration parameters which in turn requires a new calorimeter calibration to be done. An efficient way to perform calorimeter calibration is therefore essential in any detector optimization tool set. In this contribution, we present the implementation of a calibration system in iLCDirac, which is an extension of the DIR
APA, Harvard, Vancouver, ISO, and other styles
50

Ziebert, Carlos, Corneliu Barbu, and Tomas Jezdinsky. "Calorimetric studies and safety tests on lithion-ion cells and post-lithium cells." Open Access Government 37, no. 1 (2023): 416–17. http://dx.doi.org/10.56367/oag-037-10412.

Full text
Abstract:
Calorimetric studies and safety tests on lithion-ion cells and post-lithium cells Open Access Government interviews Dr Carlos Ziebert, of the Karlsruhe Institute of Technology (KIT), who explores the thermal and safety properties of batteries across calorimetric studies. The group batteries – calorimetry and safety – focus on calorimetric studies and safety tests on lithium-ion cells and post-lithium cells. Depending on the cell size and application, different types of calorimeters are used in Europe's largest Battery Calorimeter Laboratory, established in 2011. It provides seven Accelerating
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!