Books on the topic 'Capacitor testing'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 books for your research on the topic 'Capacitor testing.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse books on a wide variety of disciplines and organise your bibliography correctly.
IABSE Colloquium (1993 Copenhagen, Denmark). Remaining structural capacity: Report = Capacité restante d'une structure : rapport = Rest-Tragvermögen von Bauwerken : Bericht. Zürich, Switzerland: International Association for Bridge and Structural Engineering, 1993.
Kaufmann, Johan. The world in turmoil: Testing the UN's capacity. Hanover, N.H: Academic Council on the United Nations System, 1991.
American Society of Heating, Refrigerating and Air-Conditioning Engineers. Methods of testing capacity of refrigerant solenoid valves. Atlanta, GA: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, 2004.
Held, Gilbert. Data communications testing and troubleshooting. 2nd ed. New York: Van Nostrand Reinhold, 1992.
Held, Gilbert. Data communications testing and troubleshooting. Indianapolis, Ind., USA: H.W. Sams, 1988.
Georgia. Department of Transportation. Evaluation of bridge load-bearing capacity estimation technology. [Georgia: Dept. of Transportation, 2008.
Davis, Phillip A. Affordable and creditable procedures for determining occupational learning capacity. Brooks Air Force Base, Tex: Air Force Human Resources Laboratory, Air Force Systems Command, 1989.
Vandergraaf, T. T. The sorptive capacity of sparsely and moderately fractured rock. Pinawa, Man: AECL, Geochemistry Research Branch, Whiteshell Laboratories, 1997.
Dzhezhora, A. A. Ėlektroemkostnye preobrazovateli i metody ikh rascheta. Minsk: Belorusskai︠a︡ nauka, 2008.
Burdette, E. G. Correlation of bridge load capacity estimates with test data. Washington, D.C: Transportation Research Board, National Research Council, 1988.
Paikowsky, Samuel G. Extrapolation of pile capacity from non-failed load tests. McLean, Va: Turner-Fairbank Highway Research Center, 1999.
Salsbury, Duane. In-situ testing of radiation effects on VLSI capacitors using the NPS linear accelerator. Monterey, Calif: Naval Postgraduate School, 1996.
Tsui, C. K. Behavior of Ontario-type bridge deck on steel girders: Negative moment region and load capacity. [Austin]: The Center, 1986.
Obaia, K. H. Inelastic transverse shear capacity of large fabricated steel tubes. Edmonton, Alta., Canada: Dept. of Civil Engineering, University of Alberta, 1991.
Beal, David B. Load capacity of jack arch bridges. Albany, N.Y: New York State Dept. of Transportation, Engineering Research and Development Bureau, 1985.
Fragaszy, Richard J. Comparison of methods for estimating pile capacity: Final report, research project Y-3400, task 9. [Olympia?, Wash.]: Washington State Dept. of Transportation, Planning, Research and Public Transportation in cooperation with the U.S. Dept. of Transportation, Federal Highway Administration, 1988.
Monberg, Brian, Dana Lucero, and Joyce Felton. Pilot Testing of the TCAPP Decision Guide and Related Capacity Products: Southeast Portland, Oregon. Washington, D.C.: Transportation Research Board, 2014. http://dx.doi.org/10.17226/22334.
Itani, Rafik Y. Lateral capacity of WSDOT bearing anchor bolt details: Final report for Research Project 2620 "Lateral Capacity of WSDOT Bearing Anchor Bolt Details". [Olympia, Wash.]: Washington State Dept. of Transportation, Washington State Transportation Commission in cooperation with the U.S. Dept. of Transportation, Federal Highway Administration, 1992.
Connolly, Sean, Heather Robbins, Chad Long, Will McGoldrick, John Collum, and Blair Goodman Wade. Pilot Testing of the TCAPP Decision Guide and Related Capacity Products: Hoopstick Creek, South Carolina. Washington, D.C.: Transportation Research Board, 2014. http://dx.doi.org/10.17226/22341.
Sobolevsky, Dmitry Yu. Strength of dilating soil and load-holding capacity of deep foundations: Introduction to theory and practical application. Rotterdam: A.A. Balkema, 1995.
Onaran, Özlem. The effect of distribution on accumulation, capacity utilization and employment: Testing the wage-led hypothesis for turkey. Cairo, Egypt: Economic Research Forum for the Arab Countries, Iran & Turkey, 2001.
Rhodes, Sarah, Marie Scheetz, John Miller, Peter Ohlms, Thomas M. Guterbock, Deborah Rexrode, and Matthew Braswell. Pilot Testing of the TCAPP Decision Guide and Related Capacity Products: Charlottesville-Albemarle Metropolitan Planning Organization, Virginia. Washington, D.C.: Transportation Research Board, 2014. http://dx.doi.org/10.17226/22339.
Kochanowski, Jan. Elegiarum Libri Quattuor. Edited by Francesco Cabras. Florence: Firenze University Press, 2019. http://dx.doi.org/10.36253/978-88-6453-922-5.
Magdalena, Kubiak. Arzneimittelforschung an einwilligungsunfähigen Notfallpatienten. Baden-Baden: Nomos, 2012.
Bradley, John. The testing of fixed wing tanker and receiver aircraft to establish their air-to-air refuelling capabilities = Les essais pratiques sur les avions ravitailleurs et ravitaillés afin de déterminer leurs capacités de ravitaillement en vol. Neuilly sur Seine, France: AGARD, North Atlantic Treaty Organization, 1992.
Office, General Accounting. Emerging infectious diseases: Consensus on needed laboratory capacity could strengthen surveillance : report to the Chairman, Subcommittee on Public Health, Committee on Health, Education, Labor, and Pensions, U.S. Senate. Washington, D.C. (P.O. Box 37050, Washington, D.C. 20013): The Office, 1999.
Wang, Bo. High-accuracy circuits for on-chip capacitor ratio testing and sensor readout. 1998.
Wang, Bo. High-accuracy circuits for on-chip capacitor ratio testing and sensor readout. 1998.
American Society of Civil Engineers. and United States. Army. Corps of Engineers., eds. Bearing capacity of soils. New York, N.Y: ASCE Press, 1993.
America, Instrument Society of, ed. Control valve capacity test procedure. Research Triangle Park, N.C: Instrument Society of America, 1988.
Methods of testing capacity of refrigerant pressure regulators. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2006.
Lindfors, Bryan Wood. A full tension capacity connector for 2x4 lumber. 1990.
Stone, Duane Laurence. Lateral capacity of bridge anchor bolts. 1991.
Matt, Thomas Patrick. Full member capacity nailed tension connections. 1990.
American Society of Heating, Refrigerating and Air-Conditioning Engineers. and American National Standards Institute, eds. Method of testing flow capacity of refrigerant capillary tubes. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2006.
Remaining structural capacity: Report = Capacite restante d'une structure : rapport = Rest-Tragvermogen von Bauwerken : Bericht (IABSE report = Rapport AIPC = IVBH reports). International Association for Bridge and Structural Engineering, 1993.
Bearing capacity tests on ice reinforced with geogrid. Hanover, N.H: US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, 1993.
Methods of Testing Capacity of Refrigerant Solenoid Valves (Ashrae Standards). Amer Society of Heating, 2004.
Raina, V. K. Concrete Bridges: Inspection, Repair, Strengthening, Testing and Load Capacity Evaluation. Tata McGraw-Hill Publishing Company, 1996.
Raina, V. K. Concrete Bridges: Inspection, Repair, Strengthening, Testing and Load Capacity Evaluation. Tata McGraw-Hill Publishing Company, 1996.
Control Valve Capacity Test Procedure: American National Standard (Standards & Practices for Instrumentation & Control). Instrumentation Systems &, 1988.
Assessing strength capacity of prestressed concrete girders. Lincoln, Neb: Nebraska Dept. of Roads, 2001.
Service, United States Forest, and Technology & Development Program (U.S.), eds. Fitness and work capacity. 2nd ed. Missoula, Mont: USDA Forest Service, Technology & Development Program, 1997.
In-Situ Testing of Radiation Effects on VLSI Capacitors Using the NPS linear Accelerator. Storming Media, 1996.
American Society of Heating, Refrigerating and Air-Conditioning Engineers. and American National Standards Institute, eds. Method of testing flow capacity of suction line filters and filter-driers. New York: ASHRAE, 2003.
Method of Testing Room Air Conditioner Heating Capacity (Ashrae Standards, 58-86). Amer Society of Heating, 1987.
Reybrouck, Tony, and Marc Gewillig. Exercise testing in congenital heart disease. Oxford University Press, 2013. http://dx.doi.org/10.1093/med/9780199232482.003.0031.
The Measuring Equipment (Capacity Measures and Testing Equipment) Regulations 1995 (Statutory Instruments: 1995: 735). Stationery Office Books, 1995.
The Every Computer Performance Book: How to Avoid and Solve Performance Problems on The Computers You Work With. USA: CreateSpace, 2013.
Method of Testing for Capacity Rating of Thermostatic Refrigerant Expansion Valves (Ashrae Standards, 17-86). Amer Society of Heating, 1987.