Relevant bibliographies by topics / Carbon Fiber Reinforced Composite

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Carbon Fiber Reinforced Composite'

Author: Grafiati
Published: 14 March 2023
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Carbon Fiber Reinforced Composite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Carbon Fiber Reinforced Composite"

1

Islam, Md Zahirul, Ali Amiri, and Chad A. Ulven. "Fatigue Behavior Comparison of Inter-Ply and Intra-Ply Hybrid Flax-Carbon Fiber Reinforced Polymer Matrix Composites." Journal of Composites Science 5, no. 7 (2021): 184. http://dx.doi.org/10.3390/jcs5070184.

Full text
Abstract:
Hybridization of natural fiber with synthetic fiber to reinforce polymer matrix composites is an effective way of increasing fatigue strength of composites with substantial amount of bio-based content. Flax is the strongest type of bast natural fiber, possessing excellent mechanical and damping properties. Fatigue properties of flax fiber hybridized with synthetic carbon fiber reinforced polymer matrix composites were studied. Fatigue properties of inter-ply hybrid flax-carbon fiber reinforced composite were compared to intra-ply hybrid flax-carbon fiber reinforced composites through tensile f
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Chun Hua, Jin Bao Zhang, Mu Chao Qu, and Jian Nan Zhang. "Toughness Properties of Basalt/Carbon Fiber Hybrid Composites." Advanced Materials Research 150-151 (October 2010): 732–35. http://dx.doi.org/10.4028/www.scientific.net/amr.150-151.732.

Full text
Abstract:
Basalt fiber and carbon fiber hybrid with alternate stacking sequences reinforced epoxy composites have been developed to improve the toughness properties of conventional carbon fiber reinforced composite materials. For comparison, plain carbon fiber laminate composite and plain basalt fiber laminate composite have also been fabricated. The toughness properties of each laminate have been studied by an open hole compression test. The experimental results confirm that hybrid composites containing basalt fibers display 46% higher open hole compression strength than that of plain carbon fiber comp
APA, Harvard, Vancouver, ISO, and other styles
3

Shen, De Jun, Zi Sheng Lin, and Yan Fei Zhang. "Study on the Mechanical Properties of Carbon Fiber Composite Material of Wood." Advanced Materials Research 1120-1121 (July 2015): 659–63. http://dx.doi.org/10.4028/www.scientific.net/amr.1120-1121.659.

Full text
Abstract:
through the use of domestic carbon fiber cloth and combining domestic fast-growing wood of Larch and poplar wood, the CFRP- wood composite key interface from the composite process, stripping bearing performance, Hygrothermal effect, fracture characteristics and shear creep properties to conducted the system research . Fiber reinforced composite (Fiber Reinforced Plastic/Polymer, abbreviation FRP) material by continuous fibers and resin matrix composite and its types, including carbon fiber reinforced composite (Carbon Fiber Reinforce Plastic/Polymer, abbreviation CFRP), glass fiber reinforced
APA, Harvard, Vancouver, ISO, and other styles
4

Abasi, Falak O., and Raghad U. Aabass. "Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber." MATEC Web of Conferences 225 (2018): 01022. http://dx.doi.org/10.1051/matecconf/201822501022.

Full text
Abstract:
Newer manufacturing techniques were invented and introduced during the last few decades; some of them were increasingly popular due to their enhanced advantages and ease of manufacturing over the conventional processes. Polymer composite material such as glass, carbon and Kevlar fiber reinforced composite are popular in high performance and light weight applications such as aerospace and automobile fields. This research has been done by reinforcing the matrix (epoxy) resin with two kinds of the reinforcement fibers. One weight fractions were used (20%) wt., Epoxy reinforced with chopped carbon
APA, Harvard, Vancouver, ISO, and other styles
5

Al Zahmi, Salem, Saif Alhammadi, Amged ElHassan, and Waleed Ahmed. "Carbon Fiber/PLA Recycled Composite." Polymers 14, no. 11 (2022): 2194. http://dx.doi.org/10.3390/polym14112194.

Full text
Abstract:
Due exceptional properties such as its high-temperature resistance, mechanical characteristics, and relatively lower price, the demand for carbon fiber has been increasing over the past years. The widespread use of carbon-fiber-reinforced polymers or plastics (CFRP) has attracted many industries. However, on the other hand, the increasing demand for carbon fibers has created a waste recycling problem that must be overcome. In this context, increasing plastic waste from the new 3D printing technology has been increased, contributing to a greater need for recycling efforts. This research aims to
APA, Harvard, Vancouver, ISO, and other styles
6

Ferik, Erdem, and Cihan Kaboglu. "Impact Performance Improvement of Multiscale Hybrid Fiber Reinforced Polymer Composites with CNT." Journal of Modern Materials 10, no. 1 (2023): 29–40. http://dx.doi.org/10.21467/jmm.10.1.29-40.

Full text
Abstract:
Improving the interface properties of carbon nanotubes increases the mechanical performance of fiber-reinforced polymer matrix composites. Studies on different fiber types and different polymer matrix materials present promising results in literature. The effect of carbon nanotube (CNT) additives on impact performance of fiber reinforced polymer matrix composites produced by vacuum infusion method and drop weight impact test applied. Glass and carbon 1 m2 fiber fabrics were divided into 9 equal square pieces and placed on top of each other to make them multi-layered structure. Fiber reinforcem
APA, Harvard, Vancouver, ISO, and other styles
7

Ucpinar, Bedriye, and Ayse Aytac. "Influence of different surface-coated carbon fibers on the properties of the poly(phenylene sulfide) composites." Journal of Composite Materials 53, no. 8 (2018): 1123–32. http://dx.doi.org/10.1177/0021998318796159.

Full text
Abstract:
This paper aims to study the effect of different surface coatings of carbon fiber on the thermal, mechanical, and morphological properties of carbon fiber reinforced poly(phenylene sulfide) composites. To this end, unsized and different surface-coated carbon fibers were used. Prepared poly(phenylene sulfide)/carbon fiber composites were characterized by using Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, tensile test, dynamic mechanical analysis, and scanning electron microscopy. Tensile strength values of the surfaced-coated carbon fib
APA, Harvard, Vancouver, ISO, and other styles
8

Caliman, Radu. "Tribological Study in Case of Polymeric Composite Materials Reinforced with Unidirectional Carbon Fibers Having Stratified Structure." Applied Mechanics and Materials 657 (October 2014): 422–26. http://dx.doi.org/10.4028/www.scientific.net/amm.657.422.

Full text
Abstract:
This paper presents a study of the tribological properties of polymeric composite materials reinforced with unidirectional carbon fibers having stratified structure. Unidirectional reinforces carbon fiber materials are more effective if refer to specific properties per unit volume compared to conventional isotropic materials [. Potential benefits of carbon fibers composite materials are: high resistance to breakage and high value ratios strength/density; resistance to high temperatures; low density and high resistance to wear; low or high friction coefficient. The composites are complex and ve
APA, Harvard, Vancouver, ISO, and other styles
9

Qiao, Kun, Bo Zhu, Xiao Dong Gao, Cheng Rui Di, Wei Zhao, and Xiang Yu Yin. "A Study on the Comparison between Different Matrixes Used for Carbon Fiber Reinforced Composite Core." Applied Mechanics and Materials 66-68 (July 2011): 1072–77. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.1072.

Full text
Abstract:
The comparison between carbon fiber reinforced different matrixes composites was studied in this work. Carbon fiber reinforced phenolic resin composite and carbon fiber reinforced benzoxazine resin composite were made by pultrusion processing. Bending strength test and charpy impact strength test were taken to characterize the toughness of different composites, and scanning electronic micro-scopy(SEM) was applied to evaluate the interfacial properties between carbon fiber and different matrixes. It was shown that compared with carbon fiber reinforced phenolic composite, carbon fiber reinforced
APA, Harvard, Vancouver, ISO, and other styles
10

Yang, Xu Dong, Fan Gu, and Xin Chen. "Performance Improvement of Carbon Fiber Reinforced Epoxy Composite Sports Equipment." Key Engineering Materials 871 (January 2021): 228–33. http://dx.doi.org/10.4028/www.scientific.net/kem.871.228.

Full text
Abstract:
This study is to explore the changes in the performance of sports equipment under the action of carbon fiber reinforced epoxy composites. This paper studies the effects of carbon fiber reinforced epoxy composites in pole vault, bicycle, and tennis. The research results show that the performance of sports equipment based on carbon fiber reinforced epoxy composite materials has been greatly improved, with outstanding effects in terms of thermal properties, interface properties, mechanical properties, and fatigue resistance. Carbon fiber reinforced epoxy composite material damage expansion is div
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Carbon Fiber Reinforced Composite"

1

Pintossi, Marco. "Carbon fiber reinforced composite suspensions for a solar vehicle." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20564/.

Full text
Abstract:
Questa tesi si svolge nell’ambito di progettazione CAD e produzione di componenti per il settore dell’automotive in CFRP, in questo particolare caso, per un’auto elettrica a pannelli solari. Il lavoro da me svolto, aperto con una panoramica generale sulle tecnologie a basse emissioni oggi disponibili, è stato fatto a seguito di un percorso personale divisibile in tre fasi principali iniziate nel 2018 con la collaborazione alla costruzione della vettura Emilia 4, con la quale l’Università ha preso parte all’ASC 2018, una gara tenutasi in America, che ci ha visti vincitori della categoria crui
APA, Harvard, Vancouver, ISO, and other styles
2

Castro, Gabriel. "Drilling carbon fiber reinforced plastic and titanium stacks." Pullman, Wash. : Washington State University, 2010. http://www.dissertations.wsu.edu/Thesis/Spring2010/g_castro_042210.pdf.

Full text
Abstract:
Thesis (M.S. in mechanical engineering)--Washington State University, May 2010.<br>Title from PDF title page (viewed on July 16, 2010). "School of Engineering and Computer Science." Includes bibliographical references (p. 109-112).
APA, Harvard, Vancouver, ISO, and other styles
3

Brunnacker, Lena. "Short Carbon Fiber-Reinforced Thermoplastic Composites for Jet Engine Components." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-76733.

Full text
Abstract:
State-of-the-art aircraft engine manufactures aim to reduce theirenvironmental impact steadily. Thereby they attempt to increase engineefficiency, use new renewable fuel sources and most importantly aim toreduce component weight. While Titanium, Aluminum and continuousfiber reinforced thermosetting composites and superalloys prevail in thecurrent material selection, the present work desires to raise awareness fora novel group of materials; short carbon fiber reinforced thermoplasticcomposites (SCFRTPs). In this kind of composite short fibers givedimensional stability and strength while the the
APA, Harvard, Vancouver, ISO, and other styles
4

Breña, Sergio F. "Strengthening reinforced concrete bridges using carbon fiber reinforced polymer composites /." Full text (PDF) from UMI/Dissertation Abstracts International, 2000. http://wwwlib.umi.com/cr/utexas/fullcit?p3004223.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pandolfi, Carlo. "Experimental characterization of carbon-fiber-reinforced polymer laminates." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/9777/.

Full text
Abstract:
The goal of this thesis is to make static tensile test on four Carbon Fiber Reinforced Polymer laminates, in such a way as to obtain the ultimate tensile strength of these laminates; in particular, the laminates analyzed were produced by Hand Lay-up technology. Testing these laminates we have a reference point on which to compare other laminates and in particular CFRP laminate produced by RTM technology.
APA, Harvard, Vancouver, ISO, and other styles
6

Hsieh, Feng-Hsu. "Nanofiber reinforced epoxy composite." Ohio : Ohio University, 2006. http://www.ohiolink.edu/etd/view.cgi?ohiou1146149557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Deng, Jiangang. "Durability of carbon fiber reinforced polymer (CFRP) repair/strengthening concrete beams." Laramie, Wyo. : University of Wyoming, 2008. http://proquest.umi.com/pqdweb?did=1663060011&sid=2&Fmt=2&clientId=18949&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Durkin, Craig Raymond. "Low-Cost Continuous Production of Carbon Fiber-Reinforced Aluminum Composites." Thesis, Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19857.

Full text
Abstract:
The research conducted in this study was concerned with the development of low-cost continuous production of carbon fiber/aluminum composites. Two coatings, alumina and zirconia, were applied to the fibers to protect against interfacial degradation. They were applied using a sol-gel method and common metal salts. The fibers were infiltrated with molten aluminum using an ultrasound sonicator. The resultant composites were well-infiltrated and were tested in tension to determine their mechanical properties. Strengths were only 15-35% of the theoretical values predicted by the rule of mixtures. T
APA, Harvard, Vancouver, ISO, and other styles
9

LUPONE, FEDERICO. "Additive manufacturing of carbon fiber reinforced thermoplastic polymer composites." Doctoral thesis, Politecnico di Torino, 2022. http://hdl.handle.net/11583/2966347.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ozcan, Soydan. "Microstructure-property-performance relationships of c-fiber-reinforced carbon composite friction materials /." Available to subscribers only, 2008. http://proquest.umi.com/pqdweb?did=1686179081&sid=4&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Full text
Abstract:
Thesis (Ph. D.)--Southern Illinois University Carbondale, 2008.<br>"Department of Engineering Science." Keywords: Carbon composite, Friction materials, Carbon-fiber reinforcement Includes bibliographical references (p. 106-115). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Carbon Fiber Reinforced Composite"

1

Tredway, W. K. Carbon fiber reinforced glass matrix composites for satellite applications. United Technologies Research Center, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Xu, Yingjie, and Weihong Zhang. Modeling of Z-pinned Carbon Fiber-Reinforced Polymer (CFRP) Composite. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-3628-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bansal, Narottam P. Effects of fiber coating composition on mechanical behavior of silicon carbide fiber-reinforced celsian composites. National Aeronautics and Space Administration, Lewis Research Center, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

United States. National Aeronautics and Space Administration., ed. Carbon-rich ceramic composites from ethynyl aromatic precursors. National Aeronautics and Space Administration, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United States. National Aeronautics and Space Administration., ed. Carbon-rich ceramic composites from ethynyl aromatic precursors. National Aeronautics and Space Administration, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. National Aeronautics and Space Administration., ed. Carbon-rich ceramic composites from ethynyl aromatic precursors. National Aeronautics and Space Administration, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

1935-, Adams Donald Frederick, and Langley Research Center, eds. Mechanical properties of neat polymer matrix materials and their unidirectional carbon fiber-reinforced composites. National Aeronautics and Space Administration, Langley Research Center, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jang-Kyo, Kim, ed. Carbon nanotubes for polymer reinforcement. Taylor & Francis, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Purba, Burt K. Reinforcement of circular concrete columns with carbon fiber reinforced polymer (CFRP) jackets. Nova Scotia CAD/CAM Centre, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

University of Utah. Dept. of Materials Science and Engineering. and Langley Research Center, eds. Fractography of composite delamination: Final report. University of Utah, Materials Science and Engingeering Dept., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Carbon Fiber Reinforced Composite"

1

Jia, Zehui, Lingwei Xu, Shuangkai Huang, Haoran Xu, Zhimo Zhang, and Xu Cui. "Preparation and Impact Resistance of Carbon Fiber Reinforced Metal Laminates Modified by Carbon Nanotubes." In Lecture Notes in Civil Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1260-3_27.

Full text
Abstract:
AbstractFiber reinforced metal laminates (FMLs) are a kind of interlaminar hybrid composites made of metal sheets and fibers alternately stacked and cured at a certain pressure and temperature. In this paper, through the simulation of ABAQUS finite element software and recording the change of projectile velocity, the energy loss of projectile is calculated and the impact resistance is judged. Through the comparison of three groups of simulation experimental results, the energy absorbed by carbon fiber reinforced metal laminate is about 300 times that of aluminum alloy plate, which fully shows
APA, Harvard, Vancouver, ISO, and other styles
2

Sharma, Raghunandan, Kamal K. Kar, Malay K. Das, Gaurav K. Gupta, and Sudhir Kumar. "Short Carbon Fiber-Reinforced Polycarbonate Composites." In Composite Materials. Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49514-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

García-Arrieta, Sonia, Essi Sarlin, Amaia De La Calle, Antonello Dimiccoli, Laura Saviano, and Cristina Elizetxea. "Thermal Demanufacturing Processes for Long Fibers Recovery." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_5.

Full text
Abstract:
AbstractThe possibility of recycling glass (GF) and carbon fibers (CF) from fiber-reinforced composites by using pyrolysis was studied. Different fibers from composite waste were recovered with thermal treatment. The recycled fibers were evaluated as a reinforcement for new materials or applications. The main objective was to evaluate the fibers obtained from the different types of industrial composite waste considering the format obtained, the cleanliness and the amount of inorganic fillers and finally, the fibers quality. These characteristics defined the processes, sectors and applications
APA, Harvard, Vancouver, ISO, and other styles
4

Laurikainen, Pekka, Sarianna Palola, Amaia De La Calle, Cristina Elizetxea, Sonia García-Arrieta, and Essi Sarlin. "Fiber Resizing, Compounding and Validation." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_7.

Full text
Abstract:
AbstractThe mechanical performance of a composite is greatly related to the load transfer capability of the interface between the matrix and the reinforcing fibers, i.e. the fiber/matrix adhesion, which is enhanced by a surface treatment called sizing. The original sizing of reinforcing fibers is removed during recycling process, which is recognized to contribute in typical issues of recycled fibers, namely uneven fiber properties and poor fiber/matrix adhesion. Applying a new sizing, a process denoted here as resizing, can help mitigate the issues. Furthermore, the sizing has a major role in
APA, Harvard, Vancouver, ISO, and other styles
5

Karthik, K., C. Rathinasuriyan, T. Raja, and R. Sankar. "Mechanical Characterization of Kenaf/Carbon Fiber Reinforced Polymer Matrix Composites with Different Stacking Sequence." In Bio-Fiber Reinforced Composite Materials. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8899-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mantelli, Andrea, Alessia Romani, Raffaella Suriano, Marinella Levi, and Stefano Turri. "Additive Manufacturing of Recycled Composites." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_8.

Full text
Abstract:
AbstractAn additive remanufacturing process for mechanically recycled glass fibers and thermally recycled carbon fibers was developed. The main purpose was to demonstrate the feasibility of an additive remanufacturing process starting from recycled glass and carbon fibers to obtain a new photo- and thermally-curable composite. 3D printable and UV-curable inks were developed and characterized for new ad-hoc UV-assisted 3D printing apparatus. Rheological behavior was investigated and optimized considering the 3D printing process, the recyclate content, and the level of dispersion in the matrix.
APA, Harvard, Vancouver, ISO, and other styles
7

Nakano, K., A. Hiroyuki, and K. Ogawa. "Carbon Fiber Reinforced Silicon Carbide Composites." In Developments in the Science and Technology of Composite Materials. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Koyanagi, Jun. "Composite Strength Estimation and Prediction Based on Micromechanics." In Durability of Carbon Fiber Reinforced Plastics. CRC Press, 2024. http://dx.doi.org/10.1201/9781003371137-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tam, Lik-ho, Ruidong Wu, Jia-ao Hou, and Chao Wu. "Introduction to Carbon Fiber-Reinforced Polymer Composite." In Molecular Simulation Investigations of Property Degradation in CFRP Composite. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-3901-1_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gunyaev, G. "Effect of Carbon Fiber Properties on Carbon Fiber Reinforced Plastic Strength." In Developments in the Science and Technology of Composite Materials. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_73.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Carbon Fiber Reinforced Composite"

1

Gu, Ji-Dong, Chun Lu, K. Thorp, A. Crasto, and R. Mitchell. "Fungal Degradation of Fiber-Reinforced Composite Materials." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96275.

Full text
Abstract:
Abstract We described in a previous report that a fungal consortium isolated from degraded polymeric materials was capable of growth on pre-sterilized coupons of five composites, resulting in deep penetration into the interior of all materials within 5 weeks.1 Data describing the utilization of composite constituents as nutrients for the microflora are described in this paper. Increased microbial growth was observed when composite extract was incubated with the fungal inoculum at ambient temperatures. Scanning electron microscopic (SEM) observation of carbon fibers incubated with a naturally d
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Yu-Sen, Xiao Liang, Sheng-Kang Zong, et al. "Carbon Fiber Reinforced Composite Guided Wave Propagation Modal Analysis." In 2024 IEEE Far East NDT New Technology & Application Forum (FENDT). IEEE, 2024. https://doi.org/10.1109/fendt63052.2024.11070103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Krock, Richard P., Thomas P. O'Hearn, and Kathy Kitchen. "Corrosion Resistance of Pitch Carbon Fiber Reinforced Vinyl Ester Composites." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88170.

Full text
Abstract:
Abstract Pitch-based carbon fibers combine important properties such as corrosion and abrasion resistance, thermal and electrical conductivity, and dimensional stability into a single, low-cost, lightweight, reinforcing fiber. This unique blend of properties is enabling designers to fabricate cost-efficient composites for metal replacement. A variety of nonwovens made from Ashland's low cost CARBOFLEX® pitch-based carbon fibers will be reviewed. An extensive corrosion study of selected nonwoven carbon fibers in a variety of chemical environments supports their recommendation for severe service
APA, Harvard, Vancouver, ISO, and other styles
4

Malkapuram, Devaiah. "Development of Hybrid Natural Fiber Reinforced Composite Material for Automotive Applications." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0131.

Full text
Abstract:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;Industrialization concerns are stimulating research in development of new materials for automotive industries. Natural fibers which are available abundantly can be extracted naturally from environment. Preventing further pollutants on environment from depleting dwindling wood resources from forests and earth surface.&lt;/div&gt;&lt;div class="htmlview paragraph"&gt;Natural fibers are derived from renewable sources, making them environmentally friendly. Their use in composites reduces dependence on non-renewable resources
APA, Harvard, Vancouver, ISO, and other styles
5

Tehrani, Mehran, Ayoub Y. Boroujeni, Ramez Hajj, and Marwan Al-Haik. "Mechanical Characterization of a Hybrid Carbon Nanotube/Carbon Fiber Reinforced Composite." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62251.

Full text
Abstract:
Carbon fiber reinforced polymer composites (CFRPs) are renowned for their superior in-plane mechanical properties. However, they lack sufficient out-of-plane performance. Integrating carbon nanotubes (CNTs) into structures of CFRPs can enhance their poor out-of-plane properties. The present work investigates the effect of adding CNTs, grown on carbon fibers via a relatively low temperature growth technique, on the on and off-axis tensile properties as well as on transverse high velocity impact (∼100 m.s−1) energy absorption of the corresponding CFRPs. Two sets of composite samples based on car
APA, Harvard, Vancouver, ISO, and other styles
6

"Flexural Behavior of Carbon Fiber Reinforced Cement Composite." In SP-142: Fiber Reinforced Concrete Developments and Innovations. American Concrete Institute, 1994. http://dx.doi.org/10.14359/1184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

BARNETT, PHILIP R., NADIM S. HMEIDAT, and DAYAKAR PENUMADU. "NEAR ZERO-WASTE MANUFACTURING OF CARBON FIBER-REINFORCED THERMOPLASTIC COMPOSITES." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36464.

Full text
Abstract:
Organosheet composite scrap made from polyphenylene sulfide reinforced with long recycled carbon fibers was reprocessed to produce compression molding compounds. No additional polymer was added to the process, making this a demonstration of closed-loop recyclability in composites manufacturing. The recyclate, produced by hammer-milling organosheet trimmings, was sieved and the resulting particulate geometry was measured to predict the fiber length in the molded composites. Tensile testing of the composites revealed that high stiffness parts (tensile modulus greater than 13 GPa) can be achieved
APA, Harvard, Vancouver, ISO, and other styles
8

Zhou, Uuanxin, Ying Wang, Yuanming Xia, and Shaik Jeelani. "Dynamic Tensile Properties of Carbon Fiber and Carbon Fiber Reinforced Aluminum." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15732.

Full text
Abstract:
In this study, dynamic and quasi-static tensile behaviors of carbon fiber and unidirectional carbon fiber reinforced aluminum composite have been investigated. The complete stress-strain curves of fiber bundles and the composite at different strain rate were obtained. The experimental results show that carbon fiber is a strain rate insensitive material, but the tensile strength and critical strain of the Cf/Al composite increased with increasing of strain rate because the strain rate strengthening effect of aluminum matrix. Based on experimental results, a fiber bundles model has been combined
APA, Harvard, Vancouver, ISO, and other styles
9

Lagoudas, Dimitris C., and George Chatzigeorgiou. "Asymptotic Expansion Homogenization Method for Carbon Fiber Composite Structures Reinforced With Carbon Nanotubes." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-13158.

Full text
Abstract:
The carbon nanotubes (CNTs) with their high mechanical, thermal and electrical properties have attracted the attention of the research community. The wide variety of possible applications of composite structures containing single-walled or multi-walled CNTs has grown the need for correct characterization and understanding of the behavior of such composite structures. The identification of effective properties of CNT composites has been studied extensively the last decade by many researchers.
APA, Harvard, Vancouver, ISO, and other styles
10

Hsiao, Kuang-Ting, James Ryals, Peter H. Wu, and Ming C. Liu. "Mechanical Property Characterization of Multiscale Carbon Fibers and Carbon Nanofibers Reinforced Polymer Matrix Composite." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12937.

Full text
Abstract:
Multiscale polymeric composite laminate reinforced by carbon micro-fibers (CFs) and carbon nanofibers (CNFs) is fabricated via an in-house developed prepreg and vacuum bag/compression molding process. The multiscale fiber system is expected to form a multiscale fiber reinforcement network inside the composite. As a result, the mechanical properties of the prepreg-processed multiscale composite laminate are expected to be different from the traditional carbon fiber reinforced composite laminate. This CNFs modified multiscale composite laminate is tested for its mechanical strength with respect
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Carbon Fiber Reinforced Composite"

1

Wilkerson, Justin, Daniel Ayewah, and Daniel Davis. Fatigue Characterization of Functionalized Carbon Nanotube Reinforced Carbon Fiber Composites. Defense Technical Information Center, 2007. http://dx.doi.org/10.21236/ada515475.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Okerberg, Brian, Mark Nichols, and Jenifer Locke. Corrosion Control in Carbon Fiber Reinforced Plastic Composite Aluminum Closure Panel Hem Joints. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1755117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Naus, Dan J., James Corum, Lynn B. Klett, Mike Davenport, Rick Battiste, and Jr ,. William A. Simpson. Durability-Based Design Criteria for a Quasi-Isotropic Carbon-Fiber-Reinforced Thermoplastic Automotive Composite. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/930728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bruce. L52273 Internal Repair of Pipelines. Pipeline Research Council International, Inc. (PRCI), 2005. http://dx.doi.org/10.55274/r0010287.

Full text
Abstract:
External, corrosion-caused loss of wall thickness is the most common cause of repair for gas transmission pipelines. To prevent an area of corrosion damage from causing a pipeline to rupture, the area containing the corrosion damage must be reinforced. Since corrosion is a time dependent process, as pipelines become older, more repairs are required. Repair methods that can be applied from the inside of a gas transmission pipeline (i.e., trenchless methods) are an attractive alternative to conventional repair methods since pipeline excavation is precluded. This is particularly true for pipeline
APA, Harvard, Vancouver, ISO, and other styles
5

Sheets, Colton. PR-201-154500-R01 Composite Repair Load Transfer Study. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011468.

Full text
Abstract:
The objective of the PRCI MATR-3-11 Composite Repair Load Transfer Study was to evaluate the effect of internal pipe pressure during installation of composite reinforcement systems. Historically, there has been little work evaluating the effect of internal pressure during installation, even though almost all composite installations on transmission pipelines are performed with internal pressure present in the pipe. The focus of this work was specifically limited to reinforcement of pipelines containing simulated corrosion anomalies. Five composite repair technologies from four composite manufac
APA, Harvard, Vancouver, ISO, and other styles
6

Twomey, Janet M. Sustainable Energy Solutions Task 4.1 Intelligent Manufacturing of Hybrid Carbon-Glass Fiber-Reinforced Composite Wind Turbine Blades. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/991644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Hao, Milad Salemi, Jiaqi Chen, P. N. Balaguru, Jinhao Liang, and Ning Xie. DTPH56-15H-CAP04L An Inorganic Composite Coating for Pipeline Rehabilitation and Corrosion Protection. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011991.

Full text
Abstract:
The project aims to address the need for an inorganic coating composite for corrosion protection of pipelines in an aggressive environment. The inorganic coating does not generate CO2 emission or volatile organic content (VOC). Inorganic coatings are frequently used in the construction industry as anti-corrosion coatings, which are effective, chemically inert, hard, and thermally stable. In this study, microfiber reinforcement and Nano-modification were used to improve the performance of the inorganic coating system. The research work integrates both laboratory testing and numerical simulation
APA, Harvard, Vancouver, ISO, and other styles
8

Seferis, James C. Structural Foaming at the Nano-, Micro-, and Macro-Scales of Continuous Carbon Fiber Reinforced Polymer Matrix Composites. Defense Technical Information Center, 2012. http://dx.doi.org/10.21236/ada581879.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Seleson, Pablo, Bo Ren, C. T. Wu, Danielle Zeng, and Marco Pasetto. An Advanced Meso-Scale Peridynamic Modeling Technology using High-Performance Computing for Cost-Effective Product Design and Testing of Carbon Fiber Reinforced Polymer Composites in Light-weight Vehicles. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1844868.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rawls, G. CODIFICATION OF FIBER REINFORCED COMPOSITE PIPING. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1053023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Carbon Fiber Reinforced Composite' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography