Relevant bibliographies by topics / Crank hot stamping presses

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Crank hot stamping presses'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Crank hot stamping presses.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Crank hot stamping presses"

1

V. Telegin, I., I. M. Volodin, and P. I. Zolotukhin. "The mathematical modeling for assessing the effectiveness of hot forging extruded round in plan forgings on crank presses." International Journal of Engineering & Technology 7, no. 2.2 (2018): 30. http://dx.doi.org/10.14419/ijet.v7i2.2.9896.

Full text
Abstract:
The article presents the results of the development of a mathematical model for calculating the efficiency indices of technological schemes for hot volumetric stamping (GOSH) on crank hot-stamping presses (KGSHP) round in the forgings plan (for gear, pulley and other similar parts). Software solutions obtained on the basis of this model allow choosing from several variants of technological schemes the most effective for using it in production or further improvement.
APA, Harvard, Vancouver, ISO, and other styles
2

Radkevich, M. M., and D. Ju Fomin. "Calculation based on capacity of the crank hot-stamping presses for technological processes of thermomechanical treatment." Izvestiya MGTU MAMI 7, no. 2-2 (2013): 212–16. http://dx.doi.org/10.17816/2074-0530-68232.

Full text
Abstract:
This article describes the calculation of the force stamping elongated forging at different temperatures in the open die by the M.V.Storozhev’s formula and compares the effort with stamping identical forgings as a result of the finite-element modeling. Options regarding corrections formulas are offered.
APA, Harvard, Vancouver, ISO, and other styles
3

Новокщенов, С. Л., В. В. Куц та Е. В. Смоленцев. "СОСТОЯНИЕ СОВРЕМЕННОГО УРОВНЯ РАЗВИТИЯ ТЕХНОЛОГИЧЕСКИХ ПРОЦЕССОВ И ОБОРУДОВАНИЯ КУЗНЕЧНО-ШТАМПОВОЧНОГО ПРОИЗВОДСТВА". ВЕСТНИК ВОРОНЕЖСКОГО ГОСУДАРСТВЕННОГО ТЕХНИЧЕСКОГО УНИВЕРСИТЕТА 21, № 1 (2025): 134–47. https://doi.org/10.36622/1729-6501.2025.21.1.020.

Full text
Abstract:
в современных условиях, наряду с предприятиями замкнутого производственного цикла, возникают малые предприятия, выпускающие продукцию кузнечно-штамповочного производства. Как правило, на таких предприятиях имеется определенная номенклатура кузнечно-штамповочных машин. В зависимости от масштаба предприятия они могут оснащаться кривошипными горячештамповочными прессами (КГШП) или участком для штамповки деталей методами холодной объемной штамповки (ХОШ) и участком механической обработки. В настоящее время вновь возникает необходимость повышения производительности производства для обеспечения круп
APA, Harvard, Vancouver, ISO, and other styles
4

Новокщенов, С. Л., В. В. Куц та C. C. Юхневич. "АНАЛИЗ ВЛИЯНИЯ ПАРАМЕТРОВ ТЕХНОЛОГИЧЕСКИХ ПРОЦЕССОВ НА ПРОИЗВОДИТЕЛЬНОСТЬ ОБОРУДОВАНИЯ КУЗНЕЧНО-ШТАМПОВОЧНОГО ПРОИЗВОДСТВА". ВЕСТНИК ВОРОНЕЖСКОГО ГОСУДАРСТВЕННОГО ТЕХНИЧЕСКОГО УНИВЕРСИТЕТА 21, № 1 (2025): 161–70. https://doi.org/10.36622/1729-6501.2025.21.1.023.

Full text
Abstract:
ввиду того, что современное основное технологическое оборудование кузнечно-штамповочного производства изготавливалось с применением импортных комплектующих, в настоящее время многие предприятия столкнулись со значительным увеличением сроков изготовления, связанным с обходом действующих ограничений. Но есть еще резервы, которые позволят существенно сократить сроки разработки и изготовления механических прессов и повысить качество. Решается эта задача за счёт уточнения и дополнения методики проектирования, разработки специализированного программного обеспечения, которое позволит сократить время
APA, Harvard, Vancouver, ISO, and other styles
5

Renna, Paolo, and Michele Ambrico. "Special Issue “Feature Review Papers in Mechanical Engineering”." Applied Sciences 14, no. 11 (2024): 4872. http://dx.doi.org/10.3390/app14114872.

Full text
Abstract:
The study and advancement of crank-slide actuating mechanisms based on four-link structural groups are promising for the development of new designs of crank presses and other stamping and forging machines [...]
APA, Harvard, Vancouver, ISO, and other styles
6

Pasika, Viacheslav, Andy Augousti, Olena Lanets, and Oleh Parashchyn. "REDUCING THE KINETIC POWER OF THE CRANK PRESS MACHINE." Ukrainian Journal of Mechanical Engineering and Materials Science 9, no. 3 (2023): 21–30. http://dx.doi.org/10.23939/ujmems2023.03.021.

Full text
Abstract:
Crank presses belong to the class of machines in which the payload (stamping force) acts for a short period of time at the end of the working stroke. Since the power of a force is the product of the force times the speed, it is possible to reduce the power of a specific force only by reducing the speed of the point of action of the force. The kinematic characteristics of slider-crank mechanisms (SCMs), which are the main mechanism of crank presses, are qualitatively the same and cannot be changed. The speed of the slider, as a working body, is the most influenced by the rotation frequency and
APA, Harvard, Vancouver, ISO, and other styles
7

Telegin, Igor, and Viktor Telegin. "Physical modeling low-waste technological process of the round forging hot stamp." MATEC Web of Conferences 346 (2021): 01023. http://dx.doi.org/10.1051/matecconf/202134601023.

Full text
Abstract:
The paper presents the results of an experimental study highly efficient technological process manufacture of the round forging on a crank hot-stamping press. The high efficiency of this technological process is achieved by reducing its metal consumption. To this end, at the final stamping transition, the forging forging radii were reduced and, accordingly, the allowances for subsequent machining were minimized.
APA, Harvard, Vancouver, ISO, and other styles
8

Koryagina, O. M. "The selection of the main axis and the forming plane in automatic profiling and stamping lines." Glavnyj mekhanik (Chief Mechanic), no. 7 (June 11, 2021): 44–48. http://dx.doi.org/10.33920/pro-2-2107-04.

Full text
Abstract:
The article defines the main axis and the profiling plane in automatic profiling and stamping lines. Specific recommendations are given for choosing the position of the main axis and the profiling plane, depending on the configuration of the manufactured parts of the roll-formed section. Under the general name of profiling in the practice of stamping works, it is meant to obtain rigid and light profiles of large length and various configurations from sheet blanks. Profiling is carried out in four ways: in dies on crank presses, in dies on special bending presses, on universal bending machines
APA, Harvard, Vancouver, ISO, and other styles
9

Malikov, S. A., and I. M. Volodin. "Development of technology for the manufacture of forgings with spikes on the basis of piecemeal stamping." Izvestiya MGTU MAMI 7, no. 2-2 (2013): 80–84. http://dx.doi.org/10.17816/2074-0530-68054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gryaznov, V. V., V. A. Konovalov, D. A. Kormakov, I. V. Markechko, and E. N. Merkushev. "Stamping of forgings with side outlets of tee-type in a split tool." Omsk Scientific Bulletin, no. 194 (2025): 18–25. https://doi.org/10.25206/1813-8225-2025-194-18-25.

Full text
Abstract:
The article considers the options for analyzing design and technological solutions for hot volume stamping of tees in split dies on a double-action crank hot stamping press. The analysis technique is based on assessing the parameters of shaping with acceptable changes in the shape and size of the shaping tool engraving and the dimensions of the blanks. Modern research methods are used, accompanied by a technology design cycle from setting the initial conditions to creating a 3D model of stamped forgings and manufacturing the tool. The developed algorithm for designing the technology allows for
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Crank hot stamping presses"

1

Запорожченко, Віталій Сергійович, Виталий Сергеевич Запорожченко, Vitalii Serhiiovych Zaporozhchenko, А. М. Тур, Н. В. Богатенко та В. С. Дмитренко. "Удосконалення конструкції кривошипного гарячештампувального преса з клиновим приводом". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39553.

Full text
Abstract:
Найбільш розповсюдженим і потужним устаткуванням для гарячого об’ємного штампування є кривошипні гарячештампувальні преси (КГШП), номінальне зусилля яких досягає 160 МН (16 000 Тс). Ці преси відносяться до найбільш складних і дорогих типів устаткування з відносно великими витратами енергії. Ще одним суттєвим недоліком КГШП є нецентральне навантаження повзуна при штампуванні у бокових рівчаках штампа, центр тиску яких не співпадає з поздовжньою віссю шатуна преса.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Crank hot stamping presses"

1

Zhang, Wei, Xiaobo Chai, Surui Den, Liang Wang, and Yisheng Zhang. "Research and application of hot stamping line based on digital mechanical servo presses." In Atlantis Highlights in Materials Science and Technology. Atlantis Press International BV, 2024. https://doi.org/10.2991/978-94-6463-581-2_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Crank hot stamping presses"

1

Kobzev, K. O., S. A. Vyalov, E. S. Bozhko, and I. A. Zolotuhina. "INCREASING THE DURABILITY OF CRANK PRESSES WHEN PERFORMING SEPARATION OPERATIONS." In STATE AND DEVELOPMENT PROSPECTS OF AGRIBUSINESS Volume 2. DSTU-Print, 2020. http://dx.doi.org/10.23947/interagro.2020.2.486-488.

Full text
Abstract:
The article deals with universal crank sheet-stamping presses. The main parameters that change during the constructive improvement of universal sheet -stamping presses are described. Proposals for improving the designs of the Executive mechanisms of sheet- stamping presses aimed at increasing the effective rigidity are formulated.
APA, Harvard, Vancouver, ISO, and other styles
2

Kobzev, K. O., S. A. Vyalov, E. S. Bozhko, and I. A. Zolotuhina. "INCREASING THE WEAR RESISTANCE OF ELEMENTS AND COMPONENTS OF FORGING AND STAMPING EQUIPMENT (FOR EXAMPLE, PERFORMING SEPARATION OPERATIONS)." In STATE AND DEVELOPMENT PROSPECTS OF AGRIBUSINESS. DSTU-PRINT, 2020. http://dx.doi.org/10.23947/interagro.2020.1.686-687.

Full text
Abstract:
The article describes the possibilities of increasing the durability of crank presses. The influence of the main parameters of the press on the value of the recoil force was studied. Based on the analysis of this topic, the types of expansion of technological capabilities of crank presses and their strength and durability were summarized.
APA, Harvard, Vancouver, ISO, and other styles
3

WANG, Jun. "Slider movement planning based on improved S-curve acceleration algorithms for servo presses." In Metal Forming 2024. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903254-61.

Full text
Abstract:
Abstract. Servo press is a forming equipment that uses a servo motor to drive a crank slider for stamping and deep drawing process. The servo drive can adjust the motor speed in real time and dynamically, which provides an important support for the dynamic adjustment of the crank slider movement. To realize the smooth reciprocating movement of the large-mass and high-inertia slider, it is necessary to develop a motor speed adjustment algorithm to achieve a good match between the movement load of the slider and the torque that the motor can bear, to ensure the operation safety of the whole mach
APA, Harvard, Vancouver, ISO, and other styles
4

Jin, Zhenlin, Kai He, and R. Du. "On the Design of a Novel Controllable Mechanical Metal Forming Press Based on 2-DOF Planar Mechanism." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84713.

Full text
Abstract:
It is known that the punch motion has a significant effect on sheet metal stamping operations. For example, for deep drawing operations long dwelling is desirable. For blanking operations, on the other hand, the two-step motion can reduce the noise [1]. However, the controlled punch motion cannot be realized using conventional mechanical presses, which has the advantage of being energy efficient, fast and easier to make / maintain. Servo mechanical presses solved some of the problems, but are not energy efficient (because they cannot use flywheels as the conventional mechanical presses). Follo
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Crank hot stamping presses' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography