Log in

Relevant bibliographies by topics / Crepe / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Crepe.

Dissertations / Theses on the topic 'Crepe'

Author: Grafiati

Published: 4 June 2021

Last updated: 28 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Crepe.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Pattini, Matteo. "Propagazione dinamica di crepe assiali in tubazioni in pressione in acciaio." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Find full text

Abstract:

Il seguente elaborato ha come obiettivo la valutazione della propagazione veloce di una crepa in tubazioni in pressione in acciaio. Tale fenomeno, una volta innescato, è istantaneo, infatti ha una durata dell’ordine di pochi millesimi di secondo, ed è estremamente pericoloso in quanto comporta la fuoriuscita del materiale contenuto al suo interno. Per questo motivo, nella prima parte dell’elaborato, viene riportato un modus operandi che consente di monitorare l’instaurarsi e l’iniziale avanzamento di una crepa. Tale procedimento, basato sull’ascolto delle onde elastiche rilasciate dalla crep

APA, Harvard, Vancouver, ISO, and other styles

2

Boudreau, Jonna. "New methods for evaluation of tissue creping and the importance of coating, paper and adhesion." Doctoral thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-29317.

Full text

Abstract:

The creping process and the conditions on the Yankee cylinder dryer are key factors in a tissue paper mill, and they therefore need to be kept under good control in order to maintain a high and uniform quality. To this end it would be valuable to be able to make on-line measurements of Yankee coating thickness as well as the crepe structure of the tissue paper. The adhesion of paper to the cylinder affects the creping process and more information about the parameters that affect the adhesion is therefore of interest. To perform trials on a full scale or in a pilot plant is very costly and labo

APA, Harvard, Vancouver, ISO, and other styles

3

Fernström, Vilma. "Böjning av kräppschabern vid mjukpapperstillverkning : Ändring av kräppvinkeln." Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-74460.

Full text

Abstract:

Inom mjukpappersindustrin är det viktigt att utvecklas och upprätthålla en så bra kvalité som möjligt på produkterna för att hålla sig kvar på marknaden. Det är därför betydelsefullt att ha kunskap kring tillverkningsprocessens alla steg och hur de påverkar det slutgiltiga resultatet. En viktig del av tillverkningen är kräppningsprocessen som till stor del ger papperet sina egenskaper och kvalité. Det är i detta steg av tillverkningen som strukturen på papperet bestäms. Detta gör att ett stort fokus ligger på att förstå och utveckla kräppningsprocessen. Denna rapport görs i samarbete med en m

APA, Harvard, Vancouver, ISO, and other styles

4

Djavanroodi, Faramarz. "Creep and creep-fracture crack growth." Thesis, Imperial College London, 1989. http://hdl.handle.net/10044/1/47412.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Whitt, Harrison Collin. "Creep and Creep-fatigue Deformation Studies in 22V and P91 Creep-strength EnhancedFerritic Steels." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1555603135480185.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Giannopoulos, Ioannis. "Creep and creep-rupture behaviour of Aramid fibres." Thesis, University of Cambridge, 2010. https://www.repository.cam.ac.uk/handle/1810/252181.

Full text

Abstract:

To obtain creep-rupture data at low level within a reasonably short time-scale, two accelerated techniques have been investigated. Stepped Isothermal Method (SIM) testing involves loading a single specimen, under constant load, with the temperature increased in a series of steps to accelerate the creep. Careful choice of the temperature step and step duration allow the test to be completed in about 24 hours. At each temperature step a creep curve is obtained; these are then adjusted to compensate for the different temperature levels and a creep master curve at a reference temperature is produc

APA, Harvard, Vancouver, ISO, and other styles

7

Jones, J. P. "Creep and creep fracture of alpha/beta brass." Thesis, Swansea University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637455.

Full text

Abstract:

The uniaxial creep and creep fracture properties of α/β brass in air, have been determined over the stress range 9MPa - 185MPa at 523-673 K, using high precision constant stress creep testing machines. In the majority of cases, normal creep curves were recorded however, under certain conditions, due to the interactions of the two constituent phases some curves exhibited two areas of primary creep. Traditional Power Law analysis was carried out, and was found to be in agreement with published data. An alternative approach, known as the θ Projection Concept accurately described the accumulation

APA, Harvard, Vancouver, ISO, and other styles

8

Abdallah, Zakaria. "Creep lifing methods for components under high temperature creep." Thesis, Swansea University, 2010. https://cronfa.swan.ac.uk/Record/cronfa43065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hayes, Troy Allyn. "Creep and creep fracture of zirconium and zirconium alloys /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC IP addresses, 2004. http://wwwlib.umi.com/cr/ucsd/fullcit?p3123657.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Thornton, Gail Marilyn. "Creep behaviour and creep mechanisms of normal and healing ligaments." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0023/NQ49542.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Pearce, I. "Creep rupture and creep life prediction of aluminium airframe alloys." Thesis, Swansea University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638435.

Full text

Abstract:

Aluminium alloys 2419-T851, 2124-T851 and 7010-T7351 are candidates to succeed the current airframe alloy, RR58. In the present work, high precision constant stress creep curves have been obtained for alloys 2419-T851 and 7010-T7351 over an approximate stress range 100-400MPa at 373-463K. In the case of alloy 2419-T851, the creep curves recorded were predominantly primary in nature, alloy 7010-T7351 exhibited predominantly tertiary curves, while creep curves reported <SUP>(2)</SUP> for 2124-T851 showed an intermediate curve shape. These results have been analysed to allow comparisons to be mad

APA, Harvard, Vancouver, ISO, and other styles

12

Ward, A. R. "Creep and creep fracture of alpha + beta titanium alloy 6.2.4.6." Thesis, Swansea University, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.639344.

Full text

Abstract:

High precision uniaxial constant stress creep tests were carried out at 773K for the α+β titanium alloy Ti 6.2.4.6. Repeat data at 580 MPa provided a unique opportunity to identify stochastic creep properties and to use this information to build a probabilistic creep damage assessment for this alloy. The stochastic nature of creep properties both at a single test condition (using a generalised gamma distribution) and at various test conditions (by combining this distribution with the Monkman - Grant relation) was identified. In addition, the theta prediction methodology was extended so that li

APA, Harvard, Vancouver, ISO, and other styles

13

Girdwood, R. B. "Creep and creep recovery of the nickel-base superalloy Nimonic 105." Thesis, Swansea University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637059.

Full text

Abstract:

Uniaxial constant stress creep tests have been performed on the wrought nickel-base superalloy Nimonic 105 at 1098, 1123, 1148, 1173 and 1198K over the stress range 50-450MPa. Entire creep curves were recorded and creep curve shapes analysed. Rejuvenative procedures were applied to pre-crept samples and creep recovery quantitatively assessed.

APA, Harvard, Vancouver, ISO, and other styles

14

Hull, R. J. "Creep and creep fracture of the near-alpha titanium alloy IMI834." Thesis, Swansea University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637341.

Full text

Abstract:

High precision uniaxial constant stress tests were carried out for the near-alpha titanium alloy IMI834. Testing was completed at 823, 848, 873, 898 and 923 K, and at stresses chosen to give rupture lives in the range of about one day to six months at each temperature. Over the entire range of testing conditions, predominantly tertiary normal creep curves were recorded. During creep an alpha-case developed at air exposed surfaces, whose depth varied according to a parabolic rate law with an activation energy of 208 kJmol<SUP>-1</SUP>. For tests failing after about 1000 hours at 848, 873 and 89

APA, Harvard, Vancouver, ISO, and other styles

15

Stewart, Calvin. "A Hybrid Constitutive Model For Creep, Fatigue, And Creep-Fatigue Damage." Doctoral diss., University of Central Florida, 2013. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/6023.

Full text

Abstract:

In the combustion zone of industrial- and aero- gas turbines, thermomechanical fatigue (TMF) is the dominant damage mechanism. Thermomechanical fatigue is a coupling of independent creep, fatigue, and oxidation damage mechanisms that interact and accelerate microstructural degradation. A mixture of intergranular cracking due to creep, transgranular cracking due to fatigue, and surface embrittlement due to oxidation is often observed in gas turbine components removed from service. The current maintenance scheme for gas turbines is to remove components from service when any criteria (elongation,

APA, Harvard, Vancouver, ISO, and other styles

16

Lieu, T. D. "Creep and creep fracture of MA 957 oxide dispersion-strengthened ferritic steel." Thesis, Swansea University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637910.

Full text

Abstract:

The creep and creep fatigue properties of a 14% Cr ferritic steel (MA 957) strengthened with a dispersion of Y<SUB>2</SUB>O<SUB>3</SUB> particles have been determined using high precision constant stress creep machines. Creep testing was carried out under tension over a stress range of 250 to 420 MPa at 873 to 973K. In addition, compression creep tests were also performed over a stress range of 250 to 320 MPa at 948K. Normal creep curves were observed under all tensile conditions, i.e. after the initial strain on loading, the strain rate decreased to an apparently steady state before the onset

APA, Harvard, Vancouver, ISO, and other styles

17

Havel, Frantisek. "Creep in soft Soils." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Engineering Science and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-297.

Full text

Abstract:

<p>As more and more constructions are concentrated in densely populated urban areas, there is an increasing need to construct buildings and geotechnical structures on soft clay materials, which usually produce significant creep deformation. Although a lot of research work has been related to the creep behaviour of a natural clay material, there are still many questions about this phenomenon. Even today, prediction of the time dependent deformation is generally very problematic. Detailed laboratory, in-situ and numerical studies of soft soil creep are necessary for the better understanding and

APA, Harvard, Vancouver, ISO, and other styles

18

Feng, Gang, and 封剛. "Creep effects in nanoindentation." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B31224350.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Resen, Abdul-Amir S. "Biaxial creep of plastics." Thesis, University of Manchester, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.256753.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Liu, Qida. "Electromechanical creep in ferroelectrics." Thesis, University of Cambridge, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.613330.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Feng, Gang. "Creep effects in nanoindentation." Hong Kong : University of Hong Kong, 2001. http://sunzi.lib.hku.hk/hkuto/record.jsp?B23273288.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Yu, Chi-Wen. "Creep characteristics of soft rock and modelling of creep in tunnel : determination of creep characteristics of soft rock and development of non-linear creep analysis code for squeezing tunnel problem." Thesis, University of Bradford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.586717.

Full text

Abstract:

Squeezing or time-dependent creep deformation of rock has been encountered frequently in tunnels. It is particularly common in tunnels excavated in very soft rock or heavily fractured rock under significant in-situ stresses. In Taiwan, due to the inferior geological setting and the young sedimentary rock formations, squeezing in tunnels was found to be a very common problem from the recent case histories of some large span road tunnels. This research reviewed the existing rock creep models, and an adequate creep model for representing the creep behaviour of soft rock or a weak rock mass in gen

APA, Harvard, Vancouver, ISO, and other styles

23

DeMaio, Andrew Marc. "The Role of Bonding on the Tensile Creep Behavior of Paper." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/16329.

Full text

Abstract:

The role of bonding in the tensile creep behavior of paper was analyzed. This was accomplished by producing handsheets at a range of different bonding levels through manipulation of relative bonded area and specific bond strength. This was done by varying the level of wet pressing (to change relative bonded area) and using debonding and bonding agents (to change specific bond strength). Once manufactured, sheets underwent an extensive battery of physical testing and creep testing. Creep testing was conducted under constant humidity and cyclic humidity (accelerated creep) conditions. Microscopi

APA, Harvard, Vancouver, ISO, and other styles

24

Palmer, C. J. "High temperature creep of copper." Thesis, Swansea University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638403.

Full text

Abstract:

The key observations that have underpinned traditional power law approaches to creep mechanism identification have been re-evaluated using information obtained for pure copper and aluminium, and also for various other metals and alloys. Specifically, data is presented which show stress/creep rate plots for copper and aluminium over extended stress ranges to be well represented by continuous curves, contradicting the common assumption that a transition in mechanisms occurs as the stress is reduced. Data is also presented from a series of stress interruption tests on pure copper, with strain/str

APA, Harvard, Vancouver, ISO, and other styles

25

Wang, D. "Creep of 316 stainless steel." Thesis, Swansea University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.639338.

Full text

Abstract:

Constant stress creep tests were carried out for 316 stainless steel at 550, 600, 650 and 700<SUP>o</SUP>C over the stress range of 125 - 500 MPa. Entire creep curves were recorded by computer and creep curve shapes analysed. Within the stress and temperature range of the test matrix, creep curve shapes vary from tertiary dominant at low stress and temperature, to primary dominant at high temperature and mixed type at intermediate temperatures. Traditional parametric methods such as Larson-Miller, Orr-Dorn-Sherby and Manson-Succop methods were applied for the analysis of creep rupture life. Th

APA, Harvard, Vancouver, ISO, and other styles

26

Sun, Wei. "Creep of service-aged welds." Thesis, University of Nottingham, 1996. http://eprints.nottingham.ac.uk/11727/.

Full text

Abstract:

The creep behaviour of welds in service-aged pipes are studied. The aims of the research have been achieved using analytical, numerical and experimental approaches to the relevant subjects. Several features of the work are presented: (i) a systematic parametric study of the creep of two-material test specimens including a stress singularity analysis, (ii) an impression creep testing method using a rectangular indenter, which can be applied to study the creep properties in welds, and (iii) methods used for damage constitutive equation generation involving FE-damage modelling of the rupture test

APA, Harvard, Vancouver, ISO, and other styles

27

Rayner, Glen. "Creep of welded branched pipes." Thesis, University of Nottingham, 2004. http://eprints.nottingham.ac.uk/11660/.

Full text

Abstract:

Creep failure of welds in high-temperature power plant steam piping systems is known to be a potential cause of plant failure. Creep behaviour of plain pipes with circumferential welds and cross-weld specimens have received fairly extensive attention. However, research into the creep behaviour of welded thick-walled branched steam pipes has received less attention. Consequently, this thesis addresses improving the understanding of the creep behaviour for this type of geometry. Numerical and analytical methods are used to assess the creep behaviour of typical power plant branched pipe geometrie

APA, Harvard, Vancouver, ISO, and other styles

28

Ling, Paul Keh Yiing. "Creep of metal matrix composites." Thesis, University of Nottingham, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240496.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Kwok, Chung Yee. "Micromechanical modelling of soil creep." Thesis, University of Cambridge, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.611185.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

De, Voy Julian David James. "Failure of creep brittle materials." Thesis, University of Leicester, 1993. http://hdl.handle.net/2381/34757.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Maraboli, Contardo Luis Robinson. "Creep de aleaciones cobre molibdeno." Tesis, Universidad de Chile, 2015. http://repositorio.uchile.cl/handle/2250/132918.

Full text

Abstract:

Ingeniero Civil Mecánico<br>Esta memoria consiste en una investigación en la cual se busca mejorar las propiedades mecánicas del cobre, incorporando una dispersión nanométrica de cerámicos in-situ, mediante molienda reactiva, los cuales dificultan el movimiento de dislocaciones y límites de grano. Este trabajo tiene por objetivo fabricar aleaciones con dispersión de carburos de molibdeno (específicamente Cu - 0%v Mo2C, Cu - 2,5%v Mo2C y Cu - 5%v Mo2C) y determinar cómo afecta esta composición en la compresión en caliente y creep. Se realizaron moliendas reactivas de 100 y 150 horas, a partir

APA, Harvard, Vancouver, ISO, and other styles

32

Couto, Marcelo Guerino Pereira. "'Creep' em resinas compostas fotopolimerizáveis." Universidade de São Paulo, 2000. http://www.teses.usp.br/teses/disponiveis/25/25131/tde-11032005-110757/.

Full text

Abstract:

As resinas compostas vêm sofrendo inúmeras alterações com o objetivo de tornar o seu uso adequado para restaurações de dentes posteriores, entretanto, problemas clínicos associados à sua utilização são comumente observados, dentre eles sua resistência ao desgaste e à abrasão, a contração de polimerização, a microinfiltrção marginal, e sua deformação permanente (importante propriedade em situações clínicas onde existem áreas sujeitas às forças oclusais) e esta, normalmente não é considerada. Visando determinar o creep, por meio da deformação permanente, amostras confeccionadas com resinas com

APA, Harvard, Vancouver, ISO, and other styles

33

Ellison, Travis S. "Preliminary Evaluation of Cool-crete." Ohio University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1460388587.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Sieburg, H. O. "Creep predictions for turbomachinery components." Master's thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/18697.

Full text

Abstract:

Several theories of creep and creep rupture are reviewed. Specific attention is devoted to the brittle damage theory proposed by Kachanov. Creep, damage and life predictions for rectangular or circular cross section beams under bending and tensile loads are presented. Comparison with data for a Ni Superalloy showed life predictions could be 30X in excess of experimental values. This beam model also revealed that it is imperative that no bending moments be inadvertently applied during tensile creep testing. The creep-damage material model is extended to multidimensional situations. A refinement

APA, Harvard, Vancouver, ISO, and other styles

35

Wastesicoot, Jennie. "Tapwetamowin: Cree Spirituality and Law for Self-Governance." JCharlton Publishing Ltd, 2014. http://hdl.handle.net/1993/30319.

Full text

Abstract:

This doctoral thesis explores the uniqueness of Cree spirituality and law, based in part on oral histories and on Euro-Canadian literal evidence, specifically the multi-volumes of the Jesuit Relations and the thousands of Hudson’s Bay Company manuscripts that re-enforce insights into this Aboriginal governing system. Taken together, the oral and literal primary evidences will define how spirituality and law pre-existed colonisation and are manifested within self-governing institutions currently pursued by First Nations. The purpose is to understand better Cree spirituality and law as captured

APA, Harvard, Vancouver, ISO, and other styles

36

Neuhofer, Erik Joachim, and af Rolén Samuel Zelenka. "The Feature Creep Perception in Game Development : Exploring the role of feature creep in development methods and employee engagement." Thesis, Södertörns högskola, Medieteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-44946.

Full text

Abstract:

Game developers often find themselves coming up with ideas along the production period of a game varying in size and may go unnoticed or seem insignificant to the scope of the project but in the long run add up to break deadlines, budget and affect the morale and engagement of developers. In the modern game development industry agile development methods have increased in popularity allowing flexibility in the development process. This agile approach has emerged from traditional software development where waterfall development methods are common practice (Kanode and Haddad, 2009). Through in-de

APA, Harvard, Vancouver, ISO, and other styles

37

Larsson, Jonas. "Evaluation of current methods for creep analysis and impression creep testing of power plant steels." Thesis, KTH, Materialvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-104603.

Full text

Abstract:

Destructive testing of creep exposed components is a powerful tool for evaluation of remaining lifetime of high temperature pipe systems. The most common destructive evaluation method used today is uniaxial creep testing. Uniaxial creep tests can produce accurate creep curves but the test method has some drawbacks such as costliness and long testing times. It also demands large sample material outtake which often involve weld repair. Impression creep (IC) testing is a relatively new alternative test method for evaluating primary and secondary creep rates. The scope of this work is to evaluate

APA, Harvard, Vancouver, ISO, and other styles

38

Stracey, Muhammad Ghalib. "Continuum Damage Mechanics (CDM) modelling of dislocation creep in 9-12% Cr creep resistant steels." Master's thesis, University of Cape Town, 2016. http://hdl.handle.net/11427/22994.

Full text

Abstract:

The generation of electricity to meet an ever-growing demand has become a defining characteristic of the modern world for both developed and developing nations alike. This, coupled with the intensifying concern with pollution and its effects on the environment has put immense pressure on how quickly and efficiently power is produced. Being the most prevalent source of electricity generation, coal fired power plants have been subject to increasing scrutiny and study in an effort to improve the efficiency at which they operate. Hence, coal fired power plants are being run at increased temperatur

APA, Harvard, Vancouver, ISO, and other styles

39

Chang, Yeou Shin. "The effect of the interphase/interface region on creep and creep rupture of thermoplastic composites." Diss., This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-06062008-170854/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Chakravarty, Sanjay. "DEVELOPMENT OF CREEP TESTER AND TO INVESTIGATE THE EFFECT OF CATIONIC STARCH ON TENSILE CREEP ON SOFTWOOD BLEACHED KRAFT HANDSHEETS AT CONSTANT HUMIDITY." Miami University / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=miami1143250391.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Zhang, Ruomeng. "Evaluation of Current Concrete Creep Prediction Models." University of Toledo / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1461963600.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Saber, Mohammed. "Experimental and finite element studies of creep and creep crack growth in P91 and P92 weldments." Thesis, University of Nottingham, 2011. http://eprints.nottingham.ac.uk/12197/.

Full text

Abstract:

P91 and P92 steels are two ASTM grades of steel which have been used in high temperature applications, such as fossil-fuelled power stations, nuclear power stations and chemical plants. Operating under creep conditions, i.e. high temperature and/or high stress, the welds made from these steels are potential failure locations and, therefore, life limiting for the entire plant. In this thesis, the results of creep and creep crack growth (CCG) tests, which were carried out on P91 and P92 welds, are reported. These tests were carried out on welds constituents, i.e. parent materials (PM) and weld m

APA, Harvard, Vancouver, ISO, and other styles

43

Labrecque, Jessica. "Cree agency and environment rethinking human development in the Cree Nation of Wemindji /." Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:8881/R/?func=dbin-jump-full&object_id=92176.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Li, Han. "The nanoindentation size effects of creep." Click to view the E-thesis via HKUTO, 2004. http://sunzi.lib.hku.hk/hkuto/record/B30696380.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Segle, Peter. "Numerical simulation of weldment creep response." Doctoral thesis, KTH, Materials Science and Engineering, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3359.

Full text

Abstract:

<p>In-service inspections of high temperature pressureequipment show that weldments are prone to creep and fatiguedamage. It is not uncommon that severely damaged weldments arefound even before the design life of the component has beenreached. In order to improve this situation action has beentaken during the last decades, both from industry, universitiesand research institutes, aiming at an enhanced understanding ofthe weldment response.</p><p>The work presented in this thesis focuses on numericalsimulation of weldment creep response. For a more profoundunderstanding of the evolution of creep

APA, Harvard, Vancouver, ISO, and other styles

46

Magnusson, Hans. "Creep modelling of particle strengthened steels." Doctoral thesis, KTH, Materialteknologi, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-12235.

Full text

Abstract:

Materials used in thermal power plants have to resist creep deformation for time periods up to 30 years. Material evaluation is typically based on creep testing with a maximum duration of a few years. This information is used as input when empirically deriving models for creep. These kinds of models are of limited use when considering service conditions or compositions different from those in the experiments. In order to provide a more general model for creep, the mechanisms that give creep strength have to be identified and fundamentally described. By combining tools for thermodynamic modelli

APA, Harvard, Vancouver, ISO, and other styles

47

Olagne, Xavier. "An engineering model for snow creep." Thesis, University of British Columbia, 1989. http://hdl.handle.net/2429/27609.

Full text

Abstract:

Snowcovers on slopes densify and deform continuously throughout the winter. These slow, mainly viscous deformations are known as snow creep and this thesis presents an attempt to model them by idealizing snow as a non-Newtonian fluid, where the bulk and shear viscosities depend upon both stress and density. A three-dimensional constitutive law is developed, based largely on analogy with the flow behavior of ice and soil materials. The model, primarily intended for engineering applications (design of structures erected in a deep snowpack), is tested for creep pressures on long rigid obstacles.

APA, Harvard, Vancouver, ISO, and other styles

48

Aigbomian, Eboziegbe Patrick. "Development of wood-crete building material." Thesis, Brunel University, 2013. http://bura.brunel.ac.uk/handle/2438/13445.

Full text

Abstract:

Main concerns in the building industry includes the development of alternative building materials that reduces the amount of energy spent during manufacturing process and easier to work with. Wood-crete is a composite material developed in this study, made up of wood waste (sawdust), paper, tradical lime and water. Wood-crete is developed to provide an alternative material in construction solving problems associated with the delivery of low-cost housing across all income earners, reducing the amount of energy spent during manufacturing process of construction materials and the ease with which

APA, Harvard, Vancouver, ISO, and other styles

49

Van, Steenis Karen Anne. "Modelling creep deformation in floating ice." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ60509.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Magnusson, Hans. "Creep modelling of particle strengthened steels." Licentiate thesis, Stockholm : Kungliga Tekniska högskolan, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4436.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!