Relevant bibliographies by topics / Crusher design

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Crusher design'

Author: Grafiati
Published: 7 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Crusher design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Crusher design"

1

Quartey, Gideon, Anthony Simons, and Mutalubi Aremu Akintunde. "The Impact of Passive Displacement Fixed Jaw Design on Liner Wear in Single Toggle Jaw Crushers." European Journal of Applied Science, Engineering and Technology 3, no. 3 (2025): 83–91. https://doi.org/10.59324/ejaset.2025.3(3).08.

Full text
Abstract:
Single toggle jaw crushers are widely used in mining and aggregate industries, but they suffer from significant liner wear, leading to increased maintenance costs and downtime. This research investigates the impact of a novel single toggle jaw crusher design with a passive displacement fixed jaw on liner wear. The investigation was done by carrying out a comparative analysis between the conventional jaw crusher design and the new jaw crusher design. During the evaluation of the conventional and new crusher designs, the liners were initially weighed with an electronic scale of 20 g sensitivity,
APA, Harvard, Vancouver, ISO, and other styles
2

Quartey, Gideon, Anthony Simons, and Mutalubi Aremu Akintunde. "The Impact of Passive Displacement Fixed Jaw Design on Liner Wear in Single Toggle Jaw Crushers." European Journal of Applied Science, Engineering and Technology 3, no. 3 (2025): 83–91. https://doi.org/10.59324/ejaset.2025.3(3).08.

Full text
Abstract:
Single toggle jaw crushers are widely used in mining and aggregate industries, but they suffer from significant liner wear, leading to increased maintenance costs and downtime. This research investigates the impact of a novel single toggle jaw crusher design with a passive displacement fixed jaw on liner wear. The investigation was done by carrying out a comparative analysis between the conventional jaw crusher design and the new jaw crusher design. During the evaluation of the conventional and new crusher designs, the liners were initially weighed with an electronic scale of 20 g sensitivity,
APA, Harvard, Vancouver, ISO, and other styles
3

Chuikov, Valery E., Vladimir V. Konovalov, Marina V. Dontsova, and Svetlana S. Petrova. "JUSTIFICATION OF A PROMISING FUNCTIONAL SCHEME OF A GRAIN CRUSHER." Bulletin Samara State Agricultural Academy 9, no. 2 (2024): 34–43. https://doi.org/10.55170/1997-3225-2024-9-2-34-43.

Full text
Abstract:
The purpose of the research is to develop a promising functional scheme of the working process of a grain crusher and its general design scheme. The research methodology provides an analytical substantiation of the rational se-quence of operations of the crusher workflow. Analysis of the sequence of operations of working processes of exist-ing grain crushers made it possible to identify differences in the list and order of operations of working processes for different types of crushes. The general promising design and functional scheme of grain crushers provides for the presence of sections (z
APA, Harvard, Vancouver, ISO, and other styles
4

Kazak, Iryna, and Dmytro Sidorov. "Improving the design of a jaw shutter to increase the efficiency of material crushing." Industrial and technology systems 2, no. 1(76) (2024): 16–21. http://dx.doi.org/10.15587/2706-5448.2024.302148.

Full text
Abstract:
The object of research is the design of a jaw crusher for crushing limestone for the production of silicate bricks. The article is devoted to the study of the problem of reducing the efficiency of material crushing in a jaw crusher. The efficiency of crushing materials in jaw crushers ensures the quality of manufacturing bricks, etc. Therefore, this work is aimed at choosing a way to improve the design of the jaw crusher to increase the efficiency of material crushing. The article defines the classification of jaw crushers, their advantages and disadvantages, describes the principle of operati
APA, Harvard, Vancouver, ISO, and other styles
5

Laciak, Marek, and Marian Šofranko. "Optimization of Device Selection in Design of Technological Lines for the Aggregates Production." Applied Mechanics and Materials 611 (August 2014): 387–94. http://dx.doi.org/10.4028/www.scientific.net/amm.611.387.

Full text
Abstract:
This paper describes in the introduction part basic information concerning selection of device of technological line for the aggregates production. It is mostly focused on crushers, which during the crushing have main influence on the outer characteristics of aggregate. Correct functionality of crushers in the process of production of aggregate is crucial and relies on the selection of right mechanical influence on pieces of aggregate during crushing while respecting characteristics of crushed rocks and parameters of chosen crusher. Because of this there are written basic principles of mechani
APA, Harvard, Vancouver, ISO, and other styles
6

Ivanov, N. M., A. M. Levin, and I. Ya Fedorenko. "Dynamic features of vibrating jaw crusher of feed grain." Siberian Herald of Agricultural Science 54, no. 5 (2024): 105–12. http://dx.doi.org/10.26898/0370-8799-2024-5-11.

Full text
Abstract:
The vibration method of feed grain crusher can be realized in various designs of crushers, but preference should be given to dynamic machine schemes, as such systems contribute to energy saving and increase the reliability of the whole structure. The analysis of the totality of information on vibrating crushers developed in various branches of economy allowed formulating the main requirements to the dynamic systems of these machines. These include the following: providing vibration of points of the working bodies according to certain laws; implementation of self-synchronization of vibro-excite
APA, Harvard, Vancouver, ISO, and other styles
7

Savinyh, Petr A. "Determination of optimal design and technological parameters of a hammer crusher with sieves in end surfaces." Agricultural Engineering, no. 5 (2023): 17–22. http://dx.doi.org/10.26897/2687-1149-2023-5-17-22.

Full text
Abstract:
When preparing compound feeds, the main machines used for grain crushing are hammer crushers. To obtain a better-quality finished product with lower energy costs, it is necessary to determine the optimal design and technological parameters of a hammer crusher. To this end, the laboratory of livestock production mechanization has designed a hammer crusher with sieves in the end surfaces. The hammer crusher has adjustable cross-sections of the sieve holes, so there is no need to replace the sieves. Experimental studies have been carried out at the production facilities of the North-East Federal
APA, Harvard, Vancouver, ISO, and other styles
8

Hou, Jian Qiang, Rui Hua Wang, and Zhi Yuan Lu. "The Design of Control System about Crushers Based on PLC." Advanced Materials Research 718-720 (July 2013): 1510–15. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.1510.

Full text
Abstract:
With Programmable Logical Controller (PLC) as the control core, this paper designed automation and control system of industrial. Protection and control of crusher stall is the main contents of this article. According to the control requirements of the industrial production process, stall control system of crusher was designed. This system included the liquid level monitoring of lubricating System, crushers start, crushers speed monitoring, crushers speed transformation and protection design of crushers stall. Then we simulated the functions which the system can achieve, and got the monitoring
APA, Harvard, Vancouver, ISO, and other styles
9

Sun, Yong Hou, Chun Ge Yao, Kun Xu, and Guo Cai Jin. "Garbage Crusher Variant Design Based on Parameterization." Advanced Materials Research 421 (December 2011): 316–19. http://dx.doi.org/10.4028/www.scientific.net/amr.421.316.

Full text
Abstract:
Garbage processing is an important content in environment protection.Garbage crusher plays a key role in garbage processing. To enhance design rapidity and quality of garbage crusher, a new garbage crusher variant design methodology based on parameterization is proposed. The principle of variant design based on parameterization is introducted. Parametric model of garbage crusher is established and analyzed. A new product information model is established according to the mating relationship type among constituent parts of assembly. The product information model included several sub-models. It c
APA, Harvard, Vancouver, ISO, and other styles
10

Okechukwu, C., OA Dahunsi, PK Oke, IO Oladele, M. Dauda, and BM Olaleye. "DESIGN AND OPERATIONS CHALLENGES OF A SINGLE TOGGLE JAW CRUSHER: A REVIEW." Nigerian Journal of Technology 36, no. 3 (2017): 814–21. http://dx.doi.org/10.4314/njt.v36i3.22.

Full text
Abstract:
A review on the design and operations challenges of a single toggle jaw crusher is presented. Strength and fracture toughness of the material to be crushed are intrinsic properties that determine the time and energy required to crush the material. Economy of the crushing process is partly dependent on the angle of nip. Productivity of the crusher can be improved upon by increasing the eccentricity of the eccentric shaft, use of reversible jaws, bush bearing and easily adjustable toggle plate. Vibrations and fatigue cracks in the crusher frame will be nipped in the bud through structural analys
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Crusher design"

1

Vestman, Johan, and Patrik Sjöberg. "Hydrocone Crusher : A new fast robust design of the hydraulic system." Thesis, Linköping University, Department of Management and Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-11016.

Full text
Abstract:
<p>This master thesis has been conducted at Sandvik Svedala. The thesis is the first step towards a new construction of a hydraulic system for a Hydrocone crusher. First we studied how contaminations entered the system of today. Then the work began with designing several concepts to control the crusher. These basic concepts were presented to Sandvik and the one was chosen for further development was fine tuned and a system was built. This system was tested at a test rig to verify that the basic ideas were working. This test pointed out the disadvantages of the system, and the improvements need
APA, Harvard, Vancouver, ISO, and other styles
2

Lundgren, Gustav Müller. "Design parameters for powder removal from crushed glass in a gravity separator." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4430.

Full text
Abstract:
Mercury is one of the most dangerous elements that exist on this earth and can cause serious damage to both humans and nature. Therefore it is crucial that it does not get spread out in the environment but is recycled in a safe manner when used in consumer products. Fluorescence lamps that are coated with mercury contaminated fluorescence powder still exist today. Therefore it is crucial that the mercury contaminated fluorescence powder is separated from the glass so the fluorescence powder can be reused and the mercury can be sent to final deposal. This thesis has been done as a compulsory pa
APA, Harvard, Vancouver, ISO, and other styles
3

Du, Plessis Michael. "The design and behaviour of crush pillars on the Merensky reef." Thesis, University of Pretoria, 2015. http://hdl.handle.net/2263/58270.

Full text
Abstract:
Crush pillars are used as part of the stope support in intermediate depth tabular mining stopes. Crush pillar design should ensure that the pillars crush when formed at the mining face. This behaviour of the pillars is typically achieved when the pillars have a width to height ratio of approximately 2:1. Once crushed, the residual stress state of the pillars provides a local support function. Crush pillars are extensively used in the platinum mines of South Africa. In most cases effective pillar crushing is not achieved, resulting in pillar seismicity. The objective of the research was to det
APA, Harvard, Vancouver, ISO, and other styles
4

Aquili, Tommaso. "The Austerical City. : London at the crush test of austerity." Thesis, KTH, Urbana och regionala studier, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-239012.

Full text
Abstract:
In the UK, the unprecedented cuts to local budgets, implemented by the national governments from 2010 to the present day, have pushed local authorities to reconsider their scope, their role and their action. The ever decreasing budgets have de facto transformed local councils from service providers to territorial entrepreneurs, as the pressing pursuit of revenues has placed the economic profit at the core of the local policy-making. Urban planning plays a central role in this shift in mindset. The British planning system has been remodelled so to facilitate the implementation of development pr
APA, Harvard, Vancouver, ISO, and other styles
5

Siripun, Komsun. "Characterisations of base course materials in Western Australia pavements." Thesis, Curtin University, 2010. http://hdl.handle.net/20.500.11937/960.

Full text
Abstract:
Western Australia (WA) has a road network of approximately 177,700 km, including a 17,800 km stage highway system (Main Roads Western Australia 2009). This infrastructure supports a population of only about two million, and road funds always have to be carefully considered when allocated to highway authorities or other organisations. Pavement design is a process intended to find the most economical combination of suitable materials and layer thicknesses for construction. The pavement must have a carefully-specified unbound granular base to further reduce construction costs, and must be surface
APA, Harvard, Vancouver, ISO, and other styles
6

Lavoie, J. André. "Design and application of a quasistatic crush test fixture for investigating scale effects in energy absorbing composite plates." Master's thesis, Virginia Tech, 1993. http://hdl.handle.net/10919/41649.

Full text
Abstract:
<p>A crush test fixture for measuring energy absorption of flat plate specimens from an earlier study was redesigned to eliminate the problem of binding of the load transfer platen with the guide posts. Further modifications were to increase the stroke, and combine the two scaled test fixtures into one. This new crush test fixture was shown to produce load displacement histories exhibiting well developed sustained crushing loads over long strokes.</p> <p> An experimental study was conducted on two material systems: AS4/3502 graphite/epoxy, and a hybrid AS4-Kevlar/3502 composite. The e
APA, Harvard, Vancouver, ISO, and other styles
7

Lavoie, J. André. "Design and application of a quasistatic crush test fixture for investigating scale effects in energy absorbing composite plates /." This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-03172010-020104/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Šrámek, Jiří. "Stavebně technologický projekt výrobní a administrativní haly ATX." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392191.

Full text
Abstract:
The subject of this master’s thesis is a solution of chosen parts of building construction project. The project solves industrial hall that contains productions and administrative space. This thesis includes technological regulations for substructure, study of performing the main technological stages, design of using machines, checking and testing plans. Other phrases parts are time schedules, budget, calculations, design of site equipment including engineering report and report for performing access road. Starting materials, which were used for this thesis, were engineering report also includ
APA, Harvard, Vancouver, ISO, and other styles
9

Garnaik, Sobhan. "Computer aided design of jaw crusher." Thesis, 2010. http://ethesis.nitrkl.ac.in/1812/1/thesis_sobhan.pdf.

Full text
Abstract:
Due to their simple design and easy maintainability jaw crushers are widely used as primary size reduction equipments in mechanical and mining industries. As jaw crushers break minerals & ores of high strength and the economy of many industries depends on its performance; it is essential to improve the efficiency of the present design. The kinematic analysis of single toggle jaw crusher shows that the forces on the moving jaw plate at different crank angle are different and hence power generated varies with crank angle. One way to increase the efficiency is to store the energy in a flywheel wh
APA, Harvard, Vancouver, ISO, and other styles
10

Gupta, Deepak. "Design and Analysis of a Horizontal Shaft Impact Crusher." Thesis, 2011. http://ethesis.nitrkl.ac.in/2148/1/107ME037_-_Impact_Crusher.pdf.

Full text
Abstract:
Crusher is one of the major size reduction equipment that is used in metallurgical, mechanical, and other similar industries. They exist in various sizes and capacities which range from 0.1 ton/hr. to 50 ton/hr. They can be classified based on the degree to which they can fragment the starting material and the way they apply forces. Based on the mechanism used crushers are basically of three types namely Cone crusher, Jaw crusher and Impact crusher. Our objective is to design various components of an Impact crusher like drive mechanism, shaft, rotor, hammers, casing, and discharge mechanism wh
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Crusher design"

1

Thomas, George L., P.E., Texas. Dept. of Transportation. Materials and Tests Division., and Texas. Dept. of Transportation. Office of Research and Technology Transfer., eds. A demonstration of stone matrix asphalt mix designs using high polish value crushed stone. Texas Dept. of Transportation, Research and Technology Transfer Section, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

David, Fletcher. Crusader cruiser tank 1939-1945. Osprey, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fischer, Anne. Forester C-2000 demonstration project. U.S. Dept. of Agriculture, Forest Service, Technology & Development Program, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

John, Morton, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Design and application of a quasistatic crush test fixture for investigating scale effects in energy absorbing composite plates. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lavoie, J. Andre. Design and application of a quasistatic crush test fixture for investigating scale effects in energy absorbing composite plates. Langley Research Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Briggs, Cameron A. A fundamental model of a cone crusher. 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Fletcher, David. Crusader and Covenanter Cruiser Tanks 1939-45. Osprey Publishing, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Malen, Donald E. Fundamentals of Automobile Body Structure Design. 2nd ed. SAE International, 2020. http://dx.doi.org/10.4271/9781468601756.

Full text
Abstract:
This book provides readers with a solid understanding of the principles of automobile body structural design, illustrating the effect of changing design parameters on the behavior of automobile body structural elements. Emphasizing simple models of the behavior of body structural systems rather than complex mathematical models, the book looks at the best way to shape a structural element to achieve a desired function, why structures behave in certain ways, and how to improve performance. This second edition of Fundamentals of Automobile Body Structure Design contains many new sections includin
APA, Harvard, Vancouver, ISO, and other styles
9

BROWN, Judson. Room Design - Ready to Crush Kindergarten Dinosaur Back to School. Independently Published, 2022.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Crushy!, Candy. Candy Crushy - Christmas Coloring Book: Fun, Easy, and Relaxing Designs. Independently Published, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Crusher design"

1

Shaanika, Sam, Mutiu Erinosho, and Ester Angula. "Design and Fabrication of a Livestock’s Fodder Crusher." In Proceedings in Technology Transfer. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-5318-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bernard, S. Stephen, M. Bakkiyaraj, Md Javeed Ahmed, M. V. Niranjan, R. Nirmal, and K. Hemanand. "Performance Analysis of Oil Expelling Using Vaagai Wood Crusher." In Advances in Design and Thermal Systems. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6428-8_37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Naveen, S., P. Praveen Kumar Reddy, and S. L. N. Reddy. "Design and Random Vibrational Analysis of Horizontal Impact Hammer Crusher." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7557-0_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Palianychka, Nadiia, Kyrylo Samoichuk, Oleksandra Chervotkina, Dmytro Tymchak, and Vitalii Koshulko. "Design Improvement and Computer Modeling of the Finger Grain Crusher." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-63720-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Junaidi, Ahmad, Hendradinata, Indra Gunawan, Dodi Tafrant, Della Dwi Friatinia, and Padmarani Minora. "Design and Construction of Corn Crusher Machine for Duck Farming." In Atlantis Highlights in Engineering. Atlantis Press International BV, 2023. http://dx.doi.org/10.2991/978-94-6463-118-0_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Jie, Zhifang Zhu, Junhao Zeng, Shengtian Yang, and Yisheng Guan. "Novel Design of a Modular Multi-stage Crusher with Adaptive Clearance by TRIZ Method." In Advances in Mechanical Design. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7381-8_66.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Stoll, R. D., M. Lautsch, and T. Schulz. "EDP Assisted Systems for Planning and Design of Opencast Mines and Waste Deposits, Optimization of Loading and Transport Equipment as Well as Choice of Primary Crusher Location." In Environmental Engineering and Pollution Prevention. Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-0327-2_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Smith, Tom. "Candy Crush Saga / Goals." In Anatomy of Game Design. CRC Press, 2024. http://dx.doi.org/10.1201/9781003346586-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hwalla, Joud, Hilal El-Hassan, Joseph Assaad, and Tamer El-Maaddawy. "Multicriteria Performance Index Analysis of Geopolymeric and Cementitious Screed Flooring Materials." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_65.

Full text
Abstract:
AbstractThis paper presents a comprehensive multicriteria performance index analysis to find the most suitable screed composite to be used in flooring applications. The mechanical and durability properties and the economic and environmental impact of various screed mixes were considered. The screed composites were prepared by varying the mix design parameters, including the binder (cementitious and geopolymeric), fine aggregates (crushed sand or dune sand), solution-to-binder ratio, and binder-to-aggregate ratio. Compared to cementitious mixes, geopolymer screeds demonstrated higher production
APA, Harvard, Vancouver, ISO, and other styles
10

Hsieh, Wen Hsiang, and Tien Sheng Chang. "Creative Design of Metal Can Crushers with Eight Links." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-990-3.925.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Crusher design"

1

Fisher, Gary, David Crick, John Wolodko, Duane Kichton, and Leo Parent. "Impact Testing of Materials for Oil Sands Processing Applications." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07682.

Full text
Abstract:
Abstract One of the main wear mechanisms experienced by materials in oil sands processing applications is material-loss due to impact. Components such as crushers, breakers and sizing screens can be subject to impact damage due to the presence of rocks and boulders. In the winter, the degree of impact damage can be increased, as sand and bitumen can consolidate into large agglomerates. In conjunction with Suncor Energy, the Alberta Research Council has designed and built a test rig to allow for the evaluation of a material’s resistance to repeated impact. This paper will describe the design of
APA, Harvard, Vancouver, ISO, and other styles
2

Jackson, Karen, Edwin Fasanella, and Justin Littell. "Development of a Continuum Damage Mechanics Material Model of a Graphite- Kevlar Hybrid Fabric for Simulating the Impact Response of Energy Absorbing Subfloor Concepts." In Vertical Flight Society 73rd Annual Forum & Technology Display. The Vertical Flight Society, 2017. http://dx.doi.org/10.4050/f-0073-2017-12035.

Full text
Abstract:
This paper describes the development of input properties for a continuum damage mechanics based material model, Mat 58, within LS-DYNA® to simulate the response of a graphite-Kevlar® hybrid plain weave fabric. A limited set of material characterization tests were performed on the hybrid graphite-Kevlar® fabric. Simple finite element models were executed in LS-DYNA® to simulate the material characterization tests and to verify the Mat 58 material model. Once verified, the Mat 58 model was used in finite element models of two composite energy absorbers: a conical-shaped design, designated the "c
APA, Harvard, Vancouver, ISO, and other styles
3

"Design of a Specific Crusher of Forage." In 2016 ASABE International Meeting. American Society of Agricultural and Biological Engineers, 2016. http://dx.doi.org/10.13031/aim.20162460632.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liang-wei Zhong and Kang-min Chen. "Study on digital design platform for jaw crusher development." In 2010 International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2010. http://dx.doi.org/10.1109/mace.2010.5536630.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Firmansyah, Erwin, Budi Arifvianto, Muhammad Akhsin Muflikhun, and Muslim Mahardika. "Design and structural analysis of the battery crusher frame." In THE PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON MARITIME EDUCATION AND TRAINING (The 5th ICMET) 2021. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0126560.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rahayu, M., F. Oktafian, and Y. N. Doyoyekti. "A crusher machine design at PT XYZ using rational product design method." In THE 2ND NATIONAL CONFERENCE ON MATHEMATICS EDUCATION (NACOME) 2021: Mathematical Proof as a Tool for Learning Mathematics. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0105537.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhiyu Qin, Shuo Rong, and Xingfu Rong. "Computer aided parametricc design of tooth-shape in jaw crusher." In 2011 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce (AIMSEC). IEEE, 2011. http://dx.doi.org/10.1109/aimsec.2011.6009978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Oh, Kyeong Won, Dongnam Kim, Daehie Hong, Jong-Hyup Park, and Sukhie Hong. "Design of a Haptic Device for Excavator Equipped with Crusher." In 25th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 2008. http://dx.doi.org/10.22260/isarc2008/0031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yang, Shuolin, Shoudu Hu, Qing Chang, and Xiaofei Cheng. "Design of Electronic Control System of 8A Malt Roller Crusher." In 2020 Chinese Automation Congress (CAC). IEEE, 2020. http://dx.doi.org/10.1109/cac51589.2020.9327345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Evaluating the Impacts of Jaw Crusher Design Parameters by Simulation." In June 20-21, 2018 Paris (France). Universal Researchers, 2018. http://dx.doi.org/10.17758/uruae2.ae06181004.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Crusher design"

1

Hack, Horst. Modular, Crushed-Rock Thermal Energy Storage Pilot Design (Final Report). Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1869222.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Leis, B. N., T. P. Forte, S. Flamberg, and E. B. Clark. DTRS56-03-T-0005 Emerging Bedding Padding and Related Pipeline Construction Practices. Pipeline Research Council International, Inc. (PRCI), 2005. http://dx.doi.org/10.55274/r0011868.

Full text
Abstract:
This project assessed enhancements in safety and productivity possible through recently developed construction practices, and identified and evaluated opportunities for cost reduction, improved pipe protection, and decreased construction created pipe/pipe coating damage that could be realized with new or emerging pipe support and padding/backfill practices. Data were gathered subject to the practical constraints imposed by the use of construction equipment and the contractor's permission to enter or approach the ditch for "hands-on" measurements and close-up observation. Coating damage resista
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Han, Issam Qamhia, Erol Tutumluer, and Youngdae Kim. Effectiveness of Geosynthetics in Soil/Aggregate Stabilization—Evaluation Using Bender Element Sensor Technology. Illinois Center for Transportation, 2025. https://doi.org/10.36501/0197-9191/25-007.

Full text
Abstract:
This report presents laboratory evaluations of the effectiveness of geosynthetics in stabilizing unbound aggregate layers and develops design guidelines for using geosynthetic-stabilized pavements in Illinois. The research focused on quantifying benefits from geosynthetic mechanical stabilization and incorporating those benefits into pavement analysis and design procedures. An experimental program was conducted, including laboratory triaxial testing and large-scale test bed evaluations. Twelve geosynthetic products, including ten geogrids (integral or punched and drawn, welded, and woven) and
APA, Harvard, Vancouver, ISO, and other styles
4

Robinson, W. Full-scale evaluation of multi-axial geogrids in road applications. Engineer Research and Development Center (U.S.), 2022. http://dx.doi.org/10.21079/11681/43549.

Full text
Abstract:
The U.S. Army Engineer Research and Development Center (ERDC) constructed a full-scale unsurfaced test section to evaluate the performance of two prototype geogrids, referred to as NX950 and NX750, in road applications. The test section consisted of a 10-in.-thick crushed aggregate surface layer placed over a very weak 2 California Bearing Ratio (CBR) clay subgrade. Simulated truck traffic was applied using one of ERDC’s specially designed load carts outfitted with a single-axle dual wheel truck gear. Rutting performance and instrumentation response data were monitored at multiple traffic inte
APA, Harvard, Vancouver, ISO, and other styles
5

WEB CRIPPLING BEHAVIOUR OF COLD-FORMED STEEL CHANNELS WEB HOLES UNDER END TWO FLANGE (ETF) LOADING. The Hong Kong Institute of Steel Construction, 2024. https://doi.org/10.18057/ijasc.2024.20.4.9.

Full text
Abstract:
The design of the web-crippling behavior of cold-formed steel elements (CFS), which have been widely used in recent years, is essential. The concentrated loads acting on CFS members cause the section's web to crush and buckle. For this reason, it is necessary to calculate the web crippling strength correctly in the design of CFS sections. In order to observe the web-crippling behavior of CFS channel sections with holes drilled in the webs, this paper presents experimental and numerical experiments. Seven sections of the real-world system intended for End Two Flange (ETF) loading scenarios unde
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Crusher design' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography