Relevant bibliographies by topics / Deposit products

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Deposit products'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Deposit products.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Deposit products"

1

BOYKO, S. V., and D. D. GERASYMENKO. "FOREIGN EXPERIENCE OF PLACING FUNDS OF INDIVIDUALS AND LEGAL ENTITIES ON BANK DEPOSITS." REVIEW OF TRANSPORT ECONOMICS AND MANAGEMENT, no. 6(22) (August 11, 2022): 72–78. http://dx.doi.org/10.15802/rtem2021/260845.

Full text
Abstract:
The purpose. The work is dedicated to the analysis of the peculiarities of placing funds of individuals and legal entities on bank deposits in foreign countries in order to use the acquired results in domestic practice. Methods. In the process of writing the articlesuch methods as method of theoretical generalization, method of economic analysis withthe usage of a graphical method, as well as methods of comparison, systematization and logical generalizationwere used. TheResults.In thearticle the approaches to pricing of deposit products in commercial banks of foreign countries were decomposed
APA, Harvard, Vancouver, ISO, and other styles
2

Mulanto, Tri. "Perilaku Konsumsi Upaya Meningkatkan Potensi Produk Deposito di Bank Syariah." Intizar 22, no. 2 (2016): 333. http://dx.doi.org/10.19109/intizar.v22i2.945.

Full text
Abstract:
Perbankan syari’ah saat ini telah memiliki payung hukum yang kuat dengan hadirnya undang-undang nomor 21 tahun 2008 tentang perbankan syari’ah. Hal ini sangat berpengaruh terhadap eksistensi dari perbankan syari’ah yang semakin diminati oleh banyak kalangan.Bank syari’ah membutuhkan dana dalam menjalankan produk pembiayaannya. Deposito merupakan salah satu produk penghimpunan di bank syariah. Deposito di bank syariah terus mengalami pertumbuhan. Walaupun demikian bank syariah tetap harus meningkatkan produk deposito, untuk mencapai market share 5 persen. Untuk meningkatkan volume deposito bank
APA, Harvard, Vancouver, ISO, and other styles
3

Calen, Calen, Christopher Agustian, Asmawati Halilah Damanik, and Arwin Tannuary. "Prosedur Pengelolaan Produk Deposito pada PT. BPRS Amanah Bangsa." Owner 3, no. 1 (2019): 154–61. http://dx.doi.org/10.33395/owner.v3i1.76.

Full text
Abstract:
The Amanah Bangsa Islamic Bank Financing Bank exists and grows as a bank that is able to provide banking services based on sharia principles. As a community facility, BPRS Amanah Bangsa offers a time deposit product or often referred to as Time Deposit. Deposits at BPRS Amanah Bangsa are savings using a mudharabah contract, where the customer is called sahibul maal while the bank is the mudharib. Funds in deposits are guaranteed by the government through the Deposit Insurance Corporation (LPS) with certain conditions. Usually Deposit products have a storage period of 1, 3, 6, or 12 months acco
APA, Harvard, Vancouver, ISO, and other styles
4

Pasha, Rafithoriq Aditya Pasha, and Yenny Kornitasari. "FAKTOR – FAKTOR YANG MEMENGARUHI MINAT BERINVESTASI PADA DEPOSITO SYARIAH." Islamic Economics and finance in Focus 3, no. 2 (2024): 297–308. http://dx.doi.org/10.21776/ieff.2024.03.02.06.

Full text
Abstract:
This research was conducted to identify the factors that influence a person’s interest in using Sharia deposits. The purpose of this research is to broaden public knowledge about Sharia deposit products, and to determine whether investment knowledge factors, risk preference factors, and income factors influence investment interest in Sharia deposit products. The research method used is descriptive analysis research with data collection through questionnaires or surveys on the productive age workforce in DKI Jakarta. The results of this study indicate that the independent variables in this stud
APA, Harvard, Vancouver, ISO, and other styles
5

Alimusa, La Ode. "Kajian Konsep Akad dan Jenis Produk Perhimpunan Dana Bank Syariah di Indonesia." Jurnal Ilmiah Ekonomi Islam 8, no. 3 (2022): 2511. http://dx.doi.org/10.29040/jiei.v8i3.6488.

Full text
Abstract:
Research on contracts and savings products of Islamic banks is essential amid understanding that some people still equate Islamic banks and conventional banks. The purpose of the study is to explain the concept of contracts and types of Islamic banking savings products to explain the differences in sharia and in theory Islamic banking products and conventional banks. The research uses a literature study method with a normative juridical approach (theory, the Qur'an, hadith, and MUI fatwas). Based on the results of the study that the product of Islamic bank fund associations and conventional ba
APA, Harvard, Vancouver, ISO, and other styles
6

Nursalim, Eko. "KONSEP PRODUK TABUNGAN PADA BANK SYARIAH (Produk Tabungan Wadi’ah dan Mudharabah)." At-Tawazun, Jurnal Ekonomi Syariah 7, no. 02 (2021): 95–111. http://dx.doi.org/10.55799/tawazun.v7i02.25.

Full text
Abstract:
Islamic Bank fund collection products include savings, demand deposits and time deposits. In its operations, Islamic Bank has several fund products and services. One of the existing fund products in Syariah Bank is savings. Savings in Islamic Banks there are two contracts namely Mudharabah contract and wadi'ah. Al-wadi'ah is a deposit or deposit in a Islamic bank. The principle of al-wadi'ah is a pure deposit from one party to another party, both individual and legal entity that must be maintained and returned at any time if the cravicant wants. In the wadi'ah contract there is no profit shari
APA, Harvard, Vancouver, ISO, and other styles
7

Shah, Syed Mehmood Raza, Yan Lu, Qiang Fu, Muhammad Ishfaq, and Ghulam Abbas. "Interaction between wealth management products and bank deposits: evidence from China's shadow banking." International Journal of Bank Marketing 40, no. 1 (2021): 154–71. http://dx.doi.org/10.1108/ijbm-03-2021-0088.

Full text
Abstract:
PurposeShadow banking has been evolving rapidly in China, with banks actively using wealth management products (WMPs) to evade regulatory restrictions. These products are the largest constituent of China's shadow banking sector. A large number of these products are off-balance-sheet and considered a substitute for bank deposits. China's banking sector, especially the small and medium-sized banks (SMBs), uses these products to avoid regulatory restrictions and sustainability risk in the deposit market.Design/methodology/approachThis study empirically examined how banks in China, specifically SM
APA, Harvard, Vancouver, ISO, and other styles
8

Hartanti, Meilianti Fuji, and Silvi Yanti. "Pengaruh Tingkat Bagi Hasil Deposito Mudharabah Dan Financing To Deposit Ratio (FDR) Terhadap Pertumbuhan Deposito Mudharabah Pada Bank Syariah Mandiri Periode 2013-2019." TSARWAH 6, no. 2 (2022): 44–52. http://dx.doi.org/10.32678/tsarwah.v6i2.6712.

Full text
Abstract:
The development and growth of banking is strongly influenced by the ability of banks to collect funds from the public and the application of profit-loss sharing as well as in the marketing of banking products, one of the banking products that affect liquidity is time deposits. The growth of mudharabah deposits is strongly influenced by several factors, including the level of profit sharing and the financing to deposit ratio. Based on the results of the research conducted, it can be concluded that the hypothesis testing of the variable rate of profit sharing for mudharabah deposits is known to
APA, Harvard, Vancouver, ISO, and other styles
9

Moroz, Nataliia, and Daria Adamenko. "Deposit policy of Ukrainian banks." Galician economic journal 87, no. 2 (2024): 122–28. http://dx.doi.org/10.33108/galicianvisnyk_tntu2024.02.122.

Full text
Abstract:
The article examines the peculiarities of attracting deposits by Ukrainian banks in modern conditions, taking into account the effects of external factors. The dynamics of the volumes of deposits of individuals and legal entities in 2016–2023, changes in deposit rates, the structure of deposits (the specific weight of contributions in foreign currency, the share of time deposits), the rating of Ukrainian banks by the size of their deposit portfolio were studied. The deposit policy of banks is characterized by the predominance of funds on demand in the structure of the deposit portfolio, with a
APA, Harvard, Vancouver, ISO, and other styles
10

Khoiriyah, Ummal. "ANALISIS SISTEM PENENTUAN BESARAN NISBAH BAGI HASIL PADA PRODUK DEPOSITO DI BANK MUAMALAT INDONESIA KCP SITUBONDO." LISAN AL-HAL: Jurnal Pengembangan Pemikiran dan Kebudayaan 13, no. 1 (2019): 155–72. http://dx.doi.org/10.35316/lisanalhal.v13i1.455.

Full text
Abstract:
Bank Muamalat Indonesia branch office Situbondo has a system for determining the amount of profit sharing ratio in deposit products with terms and conditions of deposits involved of depositing and refunding, bookkeeping, profit sharing, deposit termination, in line with applicable law and jurisdiction.
 Based on the results of the research, the system of determining the amount of profit sharing ratio on deposit products at Bank Muamalat Indonesia brach office Situbondo uses revenue sharing method. The method is still running in the application of profit sharing to customers which calculat
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Deposit products"

1

Босенко, О. О. "Удосконалення методів оцінки конкурентоспроможності депозитних продуктів банку". Thesis, Севастопольський національний технічний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/58916.

Full text
Abstract:
Тези присвячені розробці напрямків удосконалення методів оцінки конкурентопсроможності депозитних продуктів банку<br>Theses are devoted to the development of directions of improvement of evaluation methods the competitiveness of of bank deposit products
APA, Harvard, Vancouver, ISO, and other styles
2

Ferrer, Alexandre. "Modélisation des mécanismes de formation sous ébullition locale des dépôts sur les gaines de combustible des Réacteurs à Eau sous Pression conduisant à des activités volumiques importantes." Phd thesis, Université de Strasbourg, 2013. http://tel.archives-ouvertes.fr/tel-01072543.

Full text
Abstract:
Les composants du circuit primaire des réacteurs nucléaires à eau sous pression (REP) subissent une corrosion généralisée entraînant le relâchement d'espèces solubles dans le fluide primaire (principalement Fe, Ni, Cr, Mn, Co). Sous l'effet de la convection du fluide, ces espèces sont entraînées dans le circuit primaire. Une partie de ces espèces peut précipiter sur les surfaces du combustible et être activée sous l'effet du flux neutronique régnant dans cette région. Ce dépôt de produits de corrosion peut, sous l'effet des forces hydrodynamiques du fluide primaire, être érodé (ou bien dissous
APA, Harvard, Vancouver, ISO, and other styles
3

Лебедєва, М. В. "Роздрібний бізнес банку: особливості та напрями розвитку". Thesis, Одеський національний економічний університет, 2021. http://local.lib/diploma/Lebedeva.pdf.

Full text
Abstract:
Доступ до роботи тільки на території бібліотеки ОНЕУ, для переходу натисніть на посилання нижче<br>У роботі розглядаються теоретичні аспекти роздрібного банківського бізнесу, їх сутнісні характеристики та організація роздрібної діяльності; визначені види роздрібних банківських послуг та їх особливості; досліджена роздрібна стратегія банку та фактори її розвитку. Проаналізовано практичні аспекти діяльності конкретного банку у сфері роздрібних операцій; досліджено склад та динаміка депозитного портфелю фізичних осіб як джерела фінансових ресурсів банку; проведений аналіз кредитних операцій розд
APA, Harvard, Vancouver, ISO, and other styles
4

Hlongwane, Rivalani Willie. "Selecting the best model for predicting a term deposit product take-up in banking." Master's thesis, University of Cape Town, 2018. http://hdl.handle.net/11427/29789.

Full text
Abstract:
In this study, we use data mining techniques to build predictive models on data collected by a Portuguese bank through a term savings product campaign conducted between May 2008 and November 2010. This data is imbalanced, given an observed take-up rate of 11.27%. Ling et al. (1998) indicated that predictive models built on imbalanced data tend to yield low sensitivity and high specificity, an indication of low true positive and high true negative rates. Our study confirms this finding. We, therefore, use three sampling techniques, namely, under-sampling, oversampling and Synthetic Minori
APA, Harvard, Vancouver, ISO, and other styles
5

Cherng, Jean-Pei Jeanie. "The effects of deposit thermal history on microstructure produced by uniform droplet spray forming." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/29921.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2002.<br>Includes bibliographical references (leaves 87-90).<br>Uniform droplet spray forming is a process aimed at producing near-net-shape parts directly from the liquid melt by spraying micron-sized droplets onto a movable target. In spray forming, the solidification rate of the deposited material is a key parameter that influences its microstructure formation and consequently, its mechanical properties. Ideal deposit microstructure has fine grain size and minimal segregation. The purpose of this thesis
APA, Harvard, Vancouver, ISO, and other styles
6

Ellefmo, Steinar Løve. "A probabilistic approach to the value chain of underground iron ore mining : From deposit to product." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Engineering Science and Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-653.

Full text
Abstract:
<p>Mining activities will eventually deplete any deposit. In a sustainability perspective, the deposit should therefore be utilised optimally during production. A prerequisite to achieve this is the deliberate and consistent utilisation of the variations in the deposit.</p><p>In an ideal world everything is certain. In the real world nothing is certain. In the real world everything is more or less probable.</p><p>Therefore, the question asked is how an underground iron ore mining company like Rana Gruber AS can benefit from knowing and exploiting the uncertainty and variability of decisive ore
APA, Harvard, Vancouver, ISO, and other styles
7

Griffin, Anna Marie. "Products and Processes of Cone-Building Eruptions at North Crater, Tongariro." The University of Waikato, 2007. http://hdl.handle.net/10289/2235.

Full text
Abstract:
North Crater occupies the north-western quadrant of the Tongariro Volcanic Centre and represents one of at least eleven vents which have been active on Tongariro since the last glacial maximum. The most recent cone-forming activity at North Crater is thought to have occurred between 14-12 ka ago to produce the distinct, wide, flattopped andesite cone. This project focused mainly on the cone-building eruptions at North Crater, including stratigraphic correlations with distal tephra, interpreting eruptive processes, and establishing the sequence of events during cone construction. Detailed field
APA, Harvard, Vancouver, ISO, and other styles
8

Edfelt, Åsa. "The Tjårrojåkka apatite-iron and Cu (-Au) deposits, northern Sweden : products of one ore forming event /." Luleå : Department of chemical engineering and geosciences, Luleå University of Technology, 2007. http://epubl.ltu.se/1402-1544/2007/17/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zanchet, Aladio. "Depósitos mercantis: um estudo das práticas contábeis dos depositários na comercialização de produtos agrícolas no estado do Paraná." Universidade de São Paulo, 2004. http://www.teses.usp.br/teses/disponiveis/12/12136/tde-26112004-134203/.

Full text
Abstract:
O objetivo geral deste trabalho foi analisar e discutir a problemática da contabilização, pelos depositários, das operações de depósito mercantil de produtos agrícolas feitas por produtores junto as tradings e agroindústrias no estado do Paraná. Dos três enfoques específicos dados a esse objetivo, o primeiro buscou identificar e analisar as características dessas operações no sentido de avaliar se elas satisfazem os critérios contábeis para o seu reconhecimento nas demonstrações contábeis do depositário. O segundo buscou identificar a política contábil adotada em relação ao reconhecimento ou n
APA, Harvard, Vancouver, ISO, and other styles
10

Barbosa, Leo. "EXAMINATION OF MICRO-SCALE SULFIDE DISTRIBUTION FOR THE GOLD MINERALIZATION IN THE LAPPBERGET DEPOSIT, GARPENBERG MINE, SWEDEN: TOWARDS A GEOMETALLURGICAL APPROACH." Thesis, Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-87022.

Full text
Abstract:
Ore characterization studies are of great importance to the mining industry, especially when dealing with precious metals by-products. It is a way towards increasing mining efficiency. The Swedish Boliden’s Zn–Pb–Ag–(Cu–Au) Lappberget Deposit is the main ore body at the Garpenberg Mine producing concentrates of zinc, lead, copper, and a gravity concentrate of silver and gold, which accounts for a significant revenue for the mine. Garpenberg Mine is an ancient and traditional mining site in Sweden, nonetheless the Lappberget deposit is a relatively recent discovery and there are still on-going
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Deposit products"

1

American Bar Association. Committee on Developments in Investment Services. and American Bar Association. Committee on Banking Law., eds. New challenges in bank distribution of retail non-deposit products. American Bar Association, Section of Business Law, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aging, United States Congress Senate Special Committee on. Uninsured bank products: Risky business for seniors? : hearing before the Special Committee on Aging, United States Senate, One Hundred Third Congress, second session, Washington, DC, September 29, 1994. U.S. G.P.O., 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. Congress. Senate. Special Committee on Aging. Uninsured bank products: Risky business for seniors? : hearing before the Special Committee on Aging, United States Senate, One Hundred Third Congress, second session, Washington, DC, September 29, 1994. U.S. G.P.O., 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

United States. Congress. House. Committee on Banking and Financial Services. Subcommittee on Capital Markets, Securities, and Government Sponsored Enterprises. Business practices of FDIC-insured institutions selling nondeposit investment products: Hearing before the Subcommittee on Capital Markets, Securities, and Government Sponsored Enterprises of the Committee on Banking and Financial Services, House of Representatives, One Hundred Fourth Congress, second session, June 26, 1996. U.S. G.P.O., 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

US GOVERNMENT. An Act to Authorize the Secretary of the Interior to Produce and Sell Products and to Sell Publications Relating to the Hoover Dam, and to Deposit Revenues Generated from the Sales into the Colorado River Dam Fund. U.S. G.P.O., 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

National Automated Clearing House Association. ACH product and marketing handbook for companies. NACHA, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Akulov, Nikolay. TESTING OF SEDIMENTARY DEPOSITS AT DIAMOND SEARCHING WORKS. AUS PUBLISHERS, 2022. http://dx.doi.org/10.26526/monography_62021f624d9c18.71126120.

Full text
Abstract:
The book contains materials on the search for modern and buried alluvial&#x0D; and primary deposits of diamonds. Much attention is paid to prospecting testing&#x0D; of potentially diamondiferous deposits and provides information on all types of&#x0D; diamondiferous rocks currently known.&#x0D; It is addressed primarily to young geologists who have embarked on a search&#x0D; for diamond deposits. It will find the answer to many questions by many geologists,&#x0D; prospectors and prospectors, leading the search for gold and diamonds.&#x0D; While this information product, for the most part, is in
APA, Harvard, Vancouver, ISO, and other styles
8

Library of Congress. Congressional Research Service, ed. Depository financial institutions: Federal vs. state regulation and product diversification. Library of Congress, Congressional Research Service, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Aizenshtat, Zeev. Thermal behaviour and products of various bituminous rock deposits (Israel) as a tool for better optimization of its future utilization. Ministry of Energy and Infrestructure, R & D, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Prapanavarat, C. Examination of the charge deposited on the external surface of polymers produced by impulse voltages. UMIST, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Deposit products"

1

Weihs, Vera. "How to Deposit Biological Material for Patent Purposes." In Microbial Processes and Products. Humana Press, 2005. http://dx.doi.org/10.1385/1-59259-847-1:451.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Changying, Shuqi Meng, Tianming Ruan, and Yalun Yan. "Research of Corrosion Products Migration Behavior in PWR Primary Circuit Under Extended Low Power Operation Mode." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_5.

Full text
Abstract:
AbstractIn order to improve the flexibility of response to power grid demand, both newly built and in-service nuclear power units need to demonstrate the feasibility of ELPO (Extended Low Power Operation) and design schemes. During ELPO, the change of local thermal hydraulic conditions caused by the change of core power will have a great impact on the migration behavior of corrosion products in the primary circuit of PWR (Pressurized Water Reactor). Corrosion products deposited in the core will affect the heat transfer of fuel cladding, axial power distribution and critical heat flux. Corrosio
APA, Harvard, Vancouver, ISO, and other styles
3

Xu, Qidong, and Steven D. Scott. "Spherulitic pyrite in seafloor hydrothermal deposits: Products of rapid crystallization from mixing fluids." In Mineral Deposit Research: Meeting the Global Challenge. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/3-540-27946-6_181.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nokleberg, Warren J., Leonid M. Parfenov, Alexander I. Khanchuk, et al. "Major products of the international collaborative project on mineral resources, metallogenesis, and tectonics of northeast Asia." In Mineral Deposit Research: Meeting the Global Challenge. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/3-540-27946-6_295.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Escobar, Karina Duverger, Adrián Alujas Díaz, and Luis Alberto Pérez García. "Pozzolanic Reactivity of the Calcination Products Obtained from Yaguajay Clay Deposit." In RILEM Bookseries. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22034-1_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kiousis, G., M. Economou-Eliopoulos, I. Paspaliaris, and I. Mitsis. "Gold, palladium and platinum recovery, as by-products, from the Skouries porphyry Cu-Au deposit, Chalkidiki area, northeastern Greece — preliminary results." In Mineral Deposit Research: Meeting the Global Challenge. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/3-540-27946-6_253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Behnam, Sarah, Giacomo Bonaiti, Severin Filek, and Tamara König. "Co-Design of Creative Products Embedding Recycled Fibers." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_11.

Full text
Abstract:
AbstractThe involvement of designers in the sustainable transition from linear to circular economy is crucial since they significantly contribute to the realization of products and services. In the FiberEUse project, a multiple-step approach to co-design was employed, starting with the definition of a first and second design brief in order to clarify the task objectives for designers. This was followed by the description of the co-design process, which aims to engage designers to contribute innovative design concepts for recycled composites. By publishing design concepts in the feedback collec
APA, Harvard, Vancouver, ISO, and other styles
8

Puig Ventosa, Ignasi. "Reconciling Waste Management and Ecological Economics." In Studies in Ecological Economics. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-22566-6_30.

Full text
Abstract:
AbstractThis chapter provides a discussion of the concept of “circular economy” and how it conflicts with some of the systemic views coming from ecological economics: material and energy flows, thermodynamics and so on. The policy context in relation to waste management is presented, with focus on the European Union and on municipal solid waste. The chapter highlights the importance of separate collection, pointing to high-efficiency source separation models (such as door-to-door collection or pay-as-you-throw), as well as the importance of quality when dealing with biowaste to obtain high-qua
APA, Harvard, Vancouver, ISO, and other styles
9

Huston, David L., Crystal Laflamme, Georges Beaudoin, and Stephen Piercey. "Light Stable Isotopes in Volcanic-Hosted Massive Sulfide Ore Systems." In Isotopes in Economic Geology, Metallogenesis and Exploration. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-27897-6_9.

Full text
Abstract:
AbstractVolcanic-hosted massive sulfide (VHMS) deposits, the ancient analogues of “black smoker” deposits that currently form on the seafloor, are the products of complex mineral systems involving the interaction of seawater with the underlying volcanic pile and associated magmatic intrusions. Light stable isotopes, particularly those of oxygen, hydrogen and sulfur, have had a strong influence in determining sources of ore fluids and sulfur as well as elucidating geological processes important in the VHMS mineral systems. Oxygen and hydrogen isotope data indicate that evolved seawater was the
APA, Harvard, Vancouver, ISO, and other styles
10

Ruan, Tianming, and Yulong Mao. "Study on the Influence of Stretch-Out Operation on the Deposition of Corrosion Products and Source Term Level in the Primary Circuit of Pressurized Water Reactor." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_7.

Full text
Abstract:
AbstractCorrosion products in the primary circuit of Pressurized Water Reactor (PWR) during operation will cause Chalk Rivers Unidentified Deposit (CRUD), increase the level of coolant source term and deposition source term outside the core, and then affect the normal operation of PWR and the radiation field during the shutdown overhaul. Stretch-Out (SO) operation is a flexible mode of reactor, which can improve the economy of reactor. In this paper, the theoretical model of CRUD and source term analysis for PWR is introduced, and the influence of SO operation on CRUD and source term level of
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Deposit products"

1

Almajnouni, Abdulmohsen, Arif Jaffer, and Joe Bates. "Novel Software to Predict Corrosion and Scaling Tendencies in Industrial Boilers." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05072.

Full text
Abstract:
Abstract Corrosion and Scaling are the major waterside problems in industrial boilers. Calcium, magnesium, iron, copper and silica predominate in most boiler deposits. These deposits usually form a dense layer that impedes heat transfer and cause costly boiler tube failures. Most corrosion products that deposit in the boiler originate in the pre-boiler systems. The majority of corrosion products consist of colloidal and particulate metals and their oxides. The compounds are swept into the boiler and deposit on boiler tube surfaces. A major factor contributing to this problem is increased retur
APA, Harvard, Vancouver, ISO, and other styles
2

Foss, Martin, Egil Gulbrandsen, and Johan Sjöblom. "Interaction of Carbon Dioxide Corrosion Inhibitors with Corrosion Products Deposit." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08343.

Full text
Abstract:
Abstract The efficiency of corrosion inhibitors may be reduced in the presence of corrosion product films. In the present paper the relation between surface wettability, corrosion rate and inhibitor performance was investigated on carbon steel specimens with partly protective ferrous carbonate (FeCO3) films in brine/oil mixtures. Two inhibitor base chemicals and a generic model compound were tested. The corrosion and inhibition tests were performed at 60 °C in 3% NaCl brine under 1 bar CO2. Wettability was studied by contact angle measurements on steel coupons with iron carbonate films. In abs
APA, Harvard, Vancouver, ISO, and other styles
3

Zeiher, E. H. K., C. A. Soderquist, and D. Woods. "Scale and Deposit Control in Reverse Osmosis Applications." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93460.

Full text
Abstract:
Abstract Causes of poor reverse osmosis (RO) performance and/or failure include scale formation, iron deposition, and biological fouling. Benchtop and field tests were used to screen products for their activity against these foulants. Experimental techniques and results are discussed.
APA, Harvard, Vancouver, ISO, and other styles
4

Tapping, Robert L., and Rocky H. Thompson. "Inferring the Corrosion Susceptibility of the Crystal River Unit-3 Steam Generator Tubes from Deposit Analyses." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88256.

Full text
Abstract:
Abstract The corrosion degradation of steam generator tubes is caused by the local breakdown of the protective oxide film on the tube surface. This localized breakdown is most often the result of aggressive chemical environments forming under deposits or in crevices and areas of restricted flow. Less often the protective oxide film is damaged by mechanical means, e.g. fretting wear. It is possible to deduce the environmental conditions within a steam generator from a careful analysis of tube deposit samples and water chemistry. As a part of Florida Power Corporation's Steam Generator Integrity
APA, Harvard, Vancouver, ISO, and other styles
5

Hudson, W. A., J. B. Delrue, S. E. Evans, and J. F. Remark. "Designing a Chemical Cleaning System a Conceptual Design." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06534.

Full text
Abstract:
abstract Over time in nuclear power plant operation, corrosion products, such as copper and iron from piping and feedwater systems, deposit on the tube sheet, tube bundle, and in crevices in the secondary side of steam generators. These deposits can be harmful to the steam generator and steam generator tubes by inducing tube degradation such as stress corrosion cracking (SCC), as well as a phenomenon known as “tube denting.” To remove corrosion deposits that have grown over a number of cycles and to mitigate further tube damage, a chemical cleaning may be designed and applied to remove bulk de
APA, Harvard, Vancouver, ISO, and other styles
6

Fukusumi, Masao, and Yoshihira Okanda. "High Temperature Corrosion in Municipal Waste Incineration." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91250.

Full text
Abstract:
Abstract Superheater deposits in a refuse-fired-boiler were subjected to high temperature corrosion tests for evaluating the corrosiveness to boiler tube materials. The specimens of UNS-G1015 carbon steel and UNS-S30400 stainless steel were coated with the deposit and then exposed at 773-873K(500-600ºC) in a static air atmosphere. The test results revealed that the corrosiveness of each deposit was closely related to the deposit chemistry and the test temperature. In the case of carbon steel, the aggressive attack occurred in the presence of a molten mixture comprising sulphates and chlorides.
APA, Harvard, Vancouver, ISO, and other styles
7

Caldwell, Madison, Sarah Evans, and Brian Lockamon. "Development of a Solvent to Maintain Steam Generator Deposit Inventories within Acceptable Levels." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06537.

Full text
Abstract:
Abstract The input rate for deposits in steam generators (SGs) is an important concern for utilities, since deposit buildup can impact heat transfer as well as cause significant damage to tubes and other critical SG components. For a typical plant, every 1 ppb of iron in feedwater results in one third of a pound of deposits per day accumulating in the steam generators. Startup activities have been shown to contribute over 100 pounds to the steam generator deposit inventory. There are a number of factors that attribute to the accumulation of deposits, some of which can be mitigated with seconda
APA, Harvard, Vancouver, ISO, and other styles
8

Koutsoukos, Peter G., Panagiota D. Natsi, and Zahid Amjad. "Review of the State of the Art of Siliceous Scale Management in Industrial Systems." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17731.

Full text
Abstract:
Abstract Fouling of equipment surfaces by siliceous materials in industrial water systems is a problem associated with high silica laden waters. The complexity of siliceous deposits formation stems from the limited solubility of amorphous silica and metal silicates. Once formed, these deposits are difficult to remove and often requires the use of chemical and/or mechanical approaches. This paper presents mechanisms of siliceous deposits formation and reviews various approaches attempted to control these deposits in industrial systems. Comparative performance data on a variety of polymeric, non
APA, Harvard, Vancouver, ISO, and other styles
9

Al-Sulaiman, Saleh, Abdul Razzaq Al-Shamari, Sundip Kuthe, Yousef Khuraibut, and Sharad Londhe. "Study on Repetitive Failure of Gas/Gas Heat Exchanger." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11320.

Full text
Abstract:
Abstract A Gas/Gas shell and tube heat exchanger in gas dehydration unit in gathering center of Oil &amp; Gas production company had failed repeatedly over the years. To investigate the cause of this repetitive failure, detailed visual inspection &amp; Non-Destructive testing (NDT) of a piece of shell plate and pieces of tube from an old scrapped gas/gas heat exchanger was carried out. Additionally X-Ray Diffraction (XRD), Inductively Coupled Plasma (ICP) and chemical analyses of deposits from tube and shell side were performed. The investigation showed that corrosion products, consisting of p
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Wenlu. "Research on Pricing of Automatic Redemption Structured Deposit Products Based on Monte Carlo Simulation." In International Conference on Data Science and Engineering. SCITEPRESS - Science and Technology Publications, 2024. http://dx.doi.org/10.5220/0012815500004547.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Deposit products"

1

Galindo, Arturo J., and Roberto Steiner. Asymmetric Interest Rate Transmission in an Inflation Targeting Framework: The Case of Colombia. Banco de la República de Colombia, 2020. http://dx.doi.org/10.32468/be.1138.

Full text
Abstract:
After adopting an inflation targeting framework for monetary policy at the turn of the century, the Central Bank of Colombia started actively using the monetary policy interest rate as its key policy tool. In this regard, this paper examines the interest rate pass-through from the monetary policy rate to the retail rates in Colombia and explores asymmetries in the adjustment process within the framework of a non-linear version of the ARDL (NARDL) model developed by Shin et al. (2014). Our findings show that the policy rate plays a key role in determining deposit and lending retail rates but th
APA, Harvard, Vancouver, ISO, and other styles
2

MIlls, Stephanie E. The Intersection of Framework Geology and Mineral Potential Assessment in the Gold Hill Mining District. Utah Geological Survey, 2025. https://doi.org/10.34191/ss-175.

Full text
Abstract:
The Gold Hill mining district (western Tooele County, Utah) was active from the late 1800s to the mid-1900s and is Utah’s leading historical producer of tungsten and arsenic. The district was also a past producer of other base and precious metals such as lead and silver. In the modern era of intense focus on domestic sources for critical minerals, the historical tungsten and arsenic production in Gold Hill stimulated renewed research interest in this district. The multi-generational geological history of the district includes Cordilleran hinterland Paleozoic bedrock of carbonate shelf to basin
APA, Harvard, Vancouver, ISO, and other styles
3

Boring, Matt. PR-186-214508-R01 In-Service Welding onto Ethylene Pipelines. Pipeline Research Council International, Inc. (PRCI), 2023. http://dx.doi.org/10.55274/r0012253.

Full text
Abstract:
Welding onto an operating pipeline, or in-service welding, for modification and repair has been used safely by pipeline operating companies for many years. The two primary concerns when welding onto carbon steel pipelines are the safety of the repair crew and the integrity of the pipeline after the in-service welds have been completed. However in-service welding has been limited for some products that could react at the pipeline operating pressure if they reach a sufficient temperature that can occur during in-service welding. Even with this additional risk mitigation approach, some companies
APA, Harvard, Vancouver, ISO, and other styles
4

Lawson. L51597 Feasibility Study of New Technology for Intake Air Filtration. Pipeline Research Council International, Inc. (PRCI), 1989. http://dx.doi.org/10.55274/r0010105.

Full text
Abstract:
Inlet air filters are widely used to remove solids and liquid droplets from the ambient air before it enters the compressor of a gas turbine. Clean inlet air provides many advantages: Less corrosion of the compressor and of gas-path hot parts, such as the turbine, decreased compressor fouling, less erosion of the compressor bladeThese in turn prevent deterioration of output and heat rate, and reduce maintenance costs. Compressor fouling is caused by the ingestion of substances that deposit and adhere to blade surfaces, resulting in reduced aerodynamic efficiency and decreased available output.
APA, Harvard, Vancouver, ISO, and other styles
5

Desbarats, A. J., and J. B. Percival. Hydrogeochemistry of mine tailings from a carbonatite-hosted Nb-REE deposit, Oka, Quebec, Canada. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331256.

Full text
Abstract:
Environmental impacts associated with the mining of carbonatite deposits are an emerging concern due to the demand for critical metals. This study investigates the chemistry of tailings seepage at the former Saint Lawrence Columbium mine near Oka, Québec, Canada, which produced pyrochlore concentrate and ferroniobium from a carbonatite-hosted Nb-REE deposit. Its objectives are to characterize the mineralogy of the tailings and their pore water and effluent chemistries. Geochemical mass balance modeling, constrained by aqueous speciation modeling and mineralogy, is then used to identify reactio
APA, Harvard, Vancouver, ISO, and other styles
6

Cawood, T. K., and J. M. Peter. The geology of critical battery metals: a spotlight on Co in VMS deposits and Li in pegmatites. Natural Resources Canada/CMSS/Information Management, 2024. http://dx.doi.org/10.4095/332348.

Full text
Abstract:
As we move away from a fossil fuel-driven economy, the demand for metals used in energy-dense, rechargeable batteries is increasing; these include cobalt and lithium. Although cobalt is mostly obtained as a by-product from nickel and copper mining, significant amounts also occur in volcanogenic massive sulfide (VMS) deposits, of which Canada has many. However, the primary controls on cobalt distribution in VMS deposits are poorly understood, and may be affected by deformation and metamorphism. We show that cobalt can occur in pyrite, which retains its primary composition through greenschist fa
APA, Harvard, Vancouver, ISO, and other styles
7

Mills, Stephanie E., and Bear Jordan. Uranium and Vanadium Resources of Utah: An Update in the Era of Critical Minerals and Carbon Neutrality. Utah Geological Survey, 2021. http://dx.doi.org/10.34191/ofr-735.

Full text
Abstract:
Utah is the second largest vanadium producing state and the third largest uranium producing state in the United States. Carnotite, a primary ore mineral for both vanadium and uranium, was first discovered and used by Native Americans as a source of pigment in the Colorado Plateau hysiographic province of eastern Utah. Radioactive deposits have been ommercially mined in Utah since about 1900, starting with radium, followed by vanadium, and thenuranium. In 1952, the discovery of the Mi Vida mine in Utah’s Lisbon Valley mining district in San Juan County kicked off a uranium exploration rush acro
APA, Harvard, Vancouver, ISO, and other styles
8

Ansari, S. M., E. M. Schetselaar, and J. A. Craven. Three-dimensional magnetotelluric modelling of the Lalor volcanogenic massive-sulfide deposit, Manitoba. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/328003.

Full text
Abstract:
Unconstrained magnetotelluric inversion commonly produces insufficient inherent resolution to image ore-system fluid pathways that were structurally thinned during post-emplacement tectonic activity. To improve the resolution in these complex environments, we synthesized the 3-D magnetotelluric (MT) response for geologically realistic models using a finite-element-based forward-modelling tool with unstructured meshes and applied it to the Lalor volcanogenic massive-sulfide deposit in the Snow Lake mining camp, Manitoba. This new tool is based on mapping interpolated or simulated resistivity va
APA, Harvard, Vancouver, ISO, and other styles
9

Lever, James, Susan Taylor, Arnold Song, Zoe Courville, Ross Lieblappen, and Jason Weale. The mechanics of snow friction as revealed by micro-scale interface observations. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42761.

Full text
Abstract:
The mechanics of snow friction are central to competitive skiing, safe winter driving and efficient polar sleds. For nearly 80 years, prevailing theory has postulated that self-lubrication accounts for low kinetic friction on snow: dry-contact sliding warms snow grains to the melting point, and further sliding produces meltwater layers that lubricate the interface. We sought to verify that self-lubrication occurs at the grain scale and to quantify the evolution of real contact area to aid modeling. We used high-resolution (15 μm) infrared thermography to observe the warming of stationary snow
APA, Harvard, Vancouver, ISO, and other styles
10

Głąb, Tomasz, Jarosław Knaga, Tomasz Zaleski, Paweł Dziwisz, Jan Gluza, and Dariusz Glanas. Determination of soil particle size distribution using computer analysis of microscopic images. Publishing House of the University of Agriculture in Krakow, 2025. https://doi.org/10.15576/repourk/2025.1.3.

Full text
Abstract:
The project aims to develop a prototype device for determining the texture of soils and mineral deposits. The innovation of the designed solution consists in a significant reduction in the time of composition analysis with the possibility of any division into granulometric groups and the complete automation of the measurement from the moment the sample is introduced into the apparatus until the result is obtained. As part of the project, industrial research and experimental development are planned to be divided into the following stages: 1. Development of the measuring system. 2. Development o
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Deposit products' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography