Log in

Relevant bibliographies by topics / Distortion curve / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Distortion curve.

Dissertations / Theses on the topic 'Distortion curve'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 15 dissertations / theses for your research on the topic 'Distortion curve.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Purcell, Andrew. "Analysis of quasiconformal maps in Rn." [Tampa, Fla] : University of South Florida, 2006. http://purl.fcla.edu/usf/dc/et/SFE0001598.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Grant, James D. E. "Spacetime distortion and quantum gravity." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321392.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Garstka, Tomasz. "Separation of process induced distortions in curved composite laminates." Thesis, University of Bristol, 2005. http://hdl.handle.net/1983/399a3721-ffcf-40b7-9e47-86d8b00c82c8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ankrum, Matthew Todd. "K3 Endo, Pro Taper, and Pro File Systems: Breakage and Distortion in Severely Curved Roots of Molars." VCU Scholars Compass, 2003. http://scholarscompass.vcu.edu/etd/842.

Full text

Abstract:

K3 ENDO, PRO TAPER, AND PRO FILE SYSTEMS: BREAKAGE AND DISTORTION IN SEVERELY CURVED ROOTS OF MOLARS.By Matthew T. Ankrum, D.D.S.A Thesis submitted in partial fulfillment of the requirements for the degree of Master of Science at Virginia Commonwealth University.Virginia Commonwealth University, 2003Major Director: Gary R. Hartwell, D.D.S., M.S.Chairman and Professor, Department of EndodonticsIt was the aim of this study to investigate the incidence of file breakage and distortion when the Pro Taper, K3 Endo and ProFile systems were used to instrument canals in the severely curved roots of e

APA, Harvard, Vancouver, ISO, and other styles

5

Bettelli, Mercedes Amelia. "Effect of Induction-Heat Post-Curing on Residual Stresses in Fast-Curing Carbon Fibre Reinforced Composites." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80527.

Full text

Abstract:

Manufacturing induced shape distortions is a common problem for composite materials. Due to the non-isotropic nature of carbon fibre reinforced polymers (CFRP) unavoidable deformations occur during part production. During fabrication of polymer composites, the material obtains its final shape at elevated temperatures. The curing process involves a transition from the liquid state to the solid, glassy state, allowing bonding between fibres and matrix. As the material cools the mismatch in thermal expansion coefficients and cure shrinkage obtained during the matrix polymerization leads to residu

APA, Harvard, Vancouver, ISO, and other styles

6

Moretti, Laure. "Simulation des distorsions de cuisson de pièces composites élaborées par co-bonding en autoclave." Thesis, Ecole nationale des Mines d'Albi-Carmaux, 2019. http://www.theses.fr/2019EMAC0009.

Full text

Abstract:

Les composites stratifiés en fibres de carbone et à matrices thermodurcissables sont, grâce à leurs propriétés spécifiques, des matériaux très performants pour les pièces de structure primaire en aéronautique. Cependant, durant leur élaboration, de nombreux phénomènes multi-physiques conduisent à l’apparition de contraintes et de déformations résiduelles qui impactent la géométrie finale de la pièce. Ces écarts de géométrie sont critiques pour les pièces de grandes dimensions et les assemblages. Il est donc primordial de prédire ces déformations par la simulation. Le travail effectué au cours

APA, Harvard, Vancouver, ISO, and other styles

7

Mendes, Ricardo António Dias Costa Carvalho. "The market system demand curve : a fundamental distortion." Master's thesis, 2018. http://hdl.handle.net/10362/38858.

Full text

Abstract:

Dissertation presented as the partial requirement for obtaining a Master's degree in Statistics and Information Management, specialization in Information Analysis and Management<br>Since the mid-1970s, the global economy has been dominated by the spread of capitalist market economies, growing inequality and increasing ecological degradation. The latter may be the most serious of these trends. Human economic activities have reached a level that is bound to instigate irreversible change to the global environment, creating conditions likely to be less conducive to human development. The mark

APA, Harvard, Vancouver, ISO, and other styles

8

Mullikin, Chad A. S. "On length minimizing curves with distortion thickness bounded below and distortion bounded above." 2006. http://purl.galileo.usg.edu/uga%5Fetd/mullikin%5Fchad%5Fa%5F200608%5Fphd.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hsieh, Kuan-shen, and 謝冠申. "Automated Surface Distortion Defect Inspection of Curved Car Mirrors." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/79319018431466742518.

Full text

Abstract:

碩士<br>朝陽科技大學<br>工業工程與管理系碩士班<br>101<br>Comparing with plane car mirrors, curved car mirrors have characteristics of higher reflectance and wider field of view. Currently, the curved mirrors have been widely used in vehicle rearview mirrors and security mirrors on the driving roads and make drivers have better fields of views and driving information. In the production process of curved car mirrors, mirrors with surface distortion defects results from the unstable temperature changes of ovens and inappropriate control of over-flow fusion process. It is not easy to measure the magnitudes of dis

APA, Harvard, Vancouver, ISO, and other styles

10

Hsu, Kai-Chieh, and 許凱傑. "Distortion Reduction for Curved Hat Channel of AHSS(DP980)." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/5cvj99.

Full text

Abstract:

碩士<br>國立臺灣大學<br>機械工程學研究所<br>105<br>As the global warming becomes worse and the environmental consciousness rises, AHSS has been widely used as the material of automobile structural parts. However, as the strength of steels increases, stamping defects such as sidewall curl and distortion become worse. This study investigates the distortion in sheet metal forming. A-pillar is an automobile structural part. Among all automobile structural parts, A-pillar is most likely to be distorted. This study induces the geometric parameters of A-pillar. This study also establishes a model for curved hat c

APA, Harvard, Vancouver, ISO, and other styles

11

Chen, Yung-Chou, and 陳永州. "Implementation of Image Distortion Correction Technology for Curved Lens." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/6zd54b.

Full text

Abstract:

碩士<br>國立臺北教育大學<br>資訊科學系碩士班<br>106<br>In recent years, everyone can take photos everywhere when he/she wants because of the popularity and convenience of the mobile cameras. However, common cameras have limited image scope. If we want to take wide-angle image photos, we need to take several photos and then splice. In this thesis, we discuss taking original distorted image photos by using curved lens and fisheye lens, and then proceeding image distortion correction to get common wide-angle image photos. The image photos taking by curved lens and fisheye lens usually would be seriously distorted

APA, Harvard, Vancouver, ISO, and other styles

12

Lin, Wen Jing, and 林文靖. "INVERSE MAPPING AND DISTORTION MEASURES FOR QUADRILATERALS WITH CURVED BONDERIES." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/62125861842731380104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Wu, Der Cheng, and 吳得政. "Distortional Analysis of Horizontally Curved Composite Steel Box Girder Bridges." Thesis, 1995. http://ndltd.ncl.edu.tw/handle/53350814432924733491.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Thokoane, Meriting Gladys. "The dimensional distortion of acrylic resin denture bases subjected to different dual cure materials and methods." Thesis, 2013. http://hdl.handle.net/10539/15490.

Full text

Abstract:

A research report submitted to the School of Oral Health Science, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, in partial fulfilment of the requirements for the degree of Master of Dentistry in the field of Prosthodontics. Johannesburg, 2013<br>Background: The majority of edentulous patients are unable to afford anything other than mucosa-borne complete dentures, but the conventional methods of complete denture fabrication can be lengthy and expensive. Simplified techniques have been proposed to reduce the number of clinical visits as well as the laboratory time

APA, Harvard, Vancouver, ISO, and other styles

15

Zirnsak, Marc [Verfasser]. "Attention induced distortions of neural population responses, receptive fields, and tuning curves / vorgelegt von Marc Zirnsak." 2009. http://d-nb.info/999609998/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!