Relevant bibliographies by topics / Dry mixes

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Dry mixes'

Author: Grafiati
Published: 30 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dry mixes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dry mixes"

1

Ilina, L. V., I. N. Mukhina, and A. K. Tulyaganov. "Optimal dry mixes simulating." IOP Conference Series: Materials Science and Engineering 962 (November 18, 2020): 022021. http://dx.doi.org/10.1088/1757-899x/962/2/022021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ulyanov, V. M., A. Yu Kiryanov, V. V. Utolin, V. A. Khripin, V. A. Batirova, and O. Ja Kravets. "Increasing the efficiency of the process of mixing components in the industrial production of dry mixes." Journal of Physics: Conference Series 2373, no. 7 (2022): 072039. http://dx.doi.org/10.1088/1742-6596/2373/7/072039.

Full text
Abstract:
Abstract Industrial mixers of solid bulk or powder components have been widely used in food, cosmetic, pharmaceutical, chemical, and many other industrial branches. Industrial mixers are designed for homogeneous mixing of dry ingredients: fodder, groats, bio supplement, fertilizers, flour, spices, etc. The general principle for all types of dry mixing is to take the product that is being mixed from one area and transfer it to another area. This procedure is repeated many times, and in the process of additional edge mixing of the zones, it leads to the distribution of the components in each oth
APA, Harvard, Vancouver, ISO, and other styles
3

Fadin, Y., and O. Shemetova. "DRY MIXTURES AND MIXING EQUIPMENT FOR THEIR PRODUCTION." Bulletin of Belgorod State Technological University named after. V. G. Shukhov 5, no. 12 (2021): 145–50. http://dx.doi.org/10.34031/2071-7318-2020-5-12-145-150.

Full text
Abstract:
Today’s economic situation creates conditions for revising the existing base of materials and raw materials in construction, as well as for transforming and using it in the future. One of the ways to achieve this goal is the creation of new types of building materials, more effective and low in the price category compared to the classic ones. Dry building mixtures belongs to such materials. The high quality of dry building mixes is guaranteed by the stability of their composition and the properties of the ingredients used. Saving time when using high-quality dry building mixes will allow to ge
APA, Harvard, Vancouver, ISO, and other styles
4

Hub, K., J. Kuha, and A. Tucek. "Sensor control of dry concrete mixes." Batiment International, Building Research and Practice 15, no. 1-6 (1987): 26–29. http://dx.doi.org/10.1080/09613218708726786.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dvorkin, Leonid, and Vitalij Marchuk. "Dry mixes on the basis of reactive-powder concrete." Zastita materijala 63, no. 3 (2022): 309–17. http://dx.doi.org/10.5937/zasmat2203309d.

Full text
Abstract:
This article presents the results of experimental studies of mortars based on dry mixes using reactive-powder concrete (RPC). This type of concrete can serve not only as the structural material in the construction of buildings and structures, but also as a semi-finished product for obtaining dry building mixes for various purposes. Redispersed polymer powder as well as fly ash according to the results of the conducted research can be used as additional components for the preparation of various dry building mixes. For development of compositions of dry mixes used the statistical models received
APA, Harvard, Vancouver, ISO, and other styles
6

Zimich, V. V. "Magnesium Dry Mixes for Outer Wall Decoration." Materials Science Forum 870 (September 2016): 3–7. http://dx.doi.org/10.4028/www.scientific.net/msf.870.3.

Full text
Abstract:
A promising mode of magnesia binder use in construction is dry building mixtures production. Depending on purpose they can be self-leveling, plastering, painting, primer, putty, etc. To produce those different binders, including magnesia one, can be used, depending on the desired aesthetic, environmental and anti-bacterial properties. It can be used in children's, medical, public institutions, and residential premises. The most preferable use for magnesia dry building mixes (MDBM) is as plaster for inner or outer buildings decoration. Plasters for external use have to be light, creating a ‘bre
APA, Harvard, Vancouver, ISO, and other styles
7

Chumakova, Olga Vyacheslavovna. "Dry Mixes Based on Zeolite-Containing Rocks." Key Engineering Materials 802 (May 2019): 17–30. http://dx.doi.org/10.4028/www.scientific.net/kem.802.17.

Full text
Abstract:
There is a significant lag in the manufacture of dry plaster and masonry mixtures. One of the reasons constraining this process is the insufficient use of local raw materials and waste of various industries by enterprises of the regions. Experience in the development of zeolite deposits in Russia shows that the exploitation of deposits focused on the use of zeolite-bearing rocks only in traditional areas (agriculture, ecology, sorbents, etc.) with small volumes of production is not enough successful and economically justified. The efficiency of operation of deposits is determined by numerous f
APA, Harvard, Vancouver, ISO, and other styles
8

Dem'yanova, V. S., P. G. Vasilik, and K. N. Makhambetova. "Water-repelling Agents for Dry Building Mixes." International Polymer Science and Technology 31, no. 4 (2004): 48–50. http://dx.doi.org/10.1177/0307174x0403100411.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Естемесова, А. С., Е. И. Кульдеев, Р. Е. Нурлыбаев, З. Н. Алтаева, and Е. С. Орынбеков. "DRY BUILDING MIXES BASED ON MODIFIED DIATOMITE." Mechanics and Technologies, no. 3 (September 30, 2024): 201–12. http://dx.doi.org/10.55956/ufgo2185.

Full text
Abstract:
Сухие строительные смеси являются неотъемлемой частью современного строительства и ремонта. Они обладают уникальными свойствами и предназначены для выполнения самых разных работ. Важно выбрать подходящий тип смеси, чтобы обеспечить долговечность и надежность конструкций. В статье приводятся данные по разработанным составам сухих строительных смесей на основе модифицированного диатомита. Исследования по изучению и получению модифицированного диатомита и его основы в сухих строительных смесях показали, что термообработка диатомита позволяет получать сырье с улучшенными прочностными свойствами пр
APA, Harvard, Vancouver, ISO, and other styles
10

Zhegera, K. V., I. S. Pyshkina, and Georgiy Victorovich Martyashin. "Evaluations of Efficiency of the Use of Amorphous Alumosilicates in Dry Mixes." Materials Science Forum 945 (February 2019): 109–14. http://dx.doi.org/10.4028/www.scientific.net/msf.945.109.

Full text
Abstract:
The article presents the results of the market research of dry mixtures produced in the Russian Federation. The established that glue dry construction mixes are in great demand. Information on the main produced glue dry mixes presented in the Russian market presented. The formulation of tile glue containing amorphous aluminosilicates as a modifying additive developed. The established that the synthesized aluminosilicates have a high activity equal to 350 mg/g. It has been established that samples of cement-based tile adhesive are characterized by high adhesion strength, which is more than Rkog
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Dry mixes"

1

Carvajal-Pinal, M. Teresa. "Effects of drug crystal polymorphism on the drug carrier interactions in dry powder mixes for inhalation." Thesis, University of Bath, 2001. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341642.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Valadez, Miguel Gonzalez. "Ultrasonic investigation of contacts in dry and mixed lubrication regimes." Thesis, University of Sheffield, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.434992.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Roger, Eve. "Mines buried in dry and saturated soils : blast experiments, soil modeling and simulations." Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAI054/document.

Full text
Abstract:
Au cours des conflits récents, les véhicules ont été sujet à des attaques impliquant une grande quantité d'explosif enterré. En général, les planchers sont visés, et leurs déformations absorbent une partie de l'énergie. Le véhicule subit également une impulsion, transmise par la détonation, qui peut blesser gravement les occupants. L'intensité de l'impulsion dépend principalement de trois paramètres: le degré de saturation du sol, la nature du sol dans lequel l'explosif est enterré, et la profondeur d'enfouissement de la charge. Les simulations numériques doivent reproduire le processus intégr
APA, Harvard, Vancouver, ISO, and other styles
4

Chakraborty, Pinaki. "Tool Life and Flank Wear Modeling of Physical Vapour Deposited TiAlN/TiN Multilayer Coated Carbide End Mill Inserts when Machining 4340 Steel Under Dry and Semi-Dry Cutting Conditions." Scholarly Repository, 2008. http://scholarlyrepository.miami.edu/oa_dissertations/22.

Full text
Abstract:
This study investigates the tool wear of advanced PVD TiALN/TiN multilayer coated end mill inserts when dry and semi-dry machining 4340 low alloy medium carbon steel. A factorial design of experiment setup consisting of two levels of speed, three levels of feed, two levels of depth of cut, and two levels of cutting conditions (semi-dry and dry) was used for the study. The combination of cutting conditions that gave the best response for different components of cutting force, cutting power, surface roughness and tool life were determined using MANOVA & ANOVA analysis and Tukey comparison of mea
APA, Harvard, Vancouver, ISO, and other styles
5

Maaß, Stefanie [Verfasser]. "Niche and neutral processes in a dry grassland: the example of oribatid mites / Stefanie Maaß." Berlin : Freie Universität Berlin, 2015. http://d-nb.info/1077212038/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mik, Šimon. "Přijímač signálů DRM." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219152.

Full text
Abstract:
The master’s thesis deals with the design of DRM (Digital Radio Mondiale) receiver. The block diagram of receiver was chosen and particular blocks were theoretically analyzed. After that followed design and production of each block. The synthesizer was programmed and the receiver properties were verified. The last part of thesis deals with real receiving of DRM broadcast.
APA, Harvard, Vancouver, ISO, and other styles
7

Lopes, Ana Rita Martins Filipe. "Influência do processo de mistura na composição física e química do alimento único para vacas leiteiras." Master's thesis, ISA/UTL, 2011. http://hdl.handle.net/10400.5/4198.

Full text
Abstract:
Mestrado em Engenharia Zootécnica - Produção Animal - Instituto Superior de Agronomia / Faculdade de Medicina Veterinária<br>This work was developed to study the influences of the mixing process in the physical and chemical composition of the TMR for dairy cows. Three mixing processes were studied: the “Control”, characterized by keeping the parameters already used on the dairy farm, particularly the order of entry in the blender and the beginning of the mixture (ration, hay – starting mixture, silage and water), the “Process A”, which changed the beginning of the mix for the moment it enters
APA, Harvard, Vancouver, ISO, and other styles
8

Argo, Lisa. "Experimental determination of the dry oxidation behavior of a compositional range of uranium-thorium mixed-oxide pellet fragments." [Gainesville, Fla.] : University of Florida, 2003. http://purl.fcla.edu/fcla/etd/UFE0001521.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

PERRICONE, VERA. "NEW TECHNOLOGICAL AND NUTRITIONAL APPROACHES IN LIVESTOCK FARMING." Doctoral thesis, Università degli Studi di Milano, 2020. http://hdl.handle.net/2434/709026.

Full text
Abstract:
The livestock sector is facing a huge challenge trying to meet the increasing demand of animal products. To this end several efforts have been done to enhance animals’ performances, and nutrition provides a valuable asset. Animals’ performances can indeed be boosted through nutritional approaches, including both the application of technologies in a context of ‘precision nutrition’ and the administration of novel feed additives or feedstuffs with beneficial effects on animals’ health. The main aim of this thesis was to investigate 1) the proficiency of feeding systems for dairy cows (1st trial)
APA, Harvard, Vancouver, ISO, and other styles
10

TESTA, FRANCESCA. "EVALUATION OF rHIgM22 EFFECT ON MIXED GLIAL CELLS CULTURE." Doctoral thesis, Università degli Studi di Milano, 2018. http://hdl.handle.net/2434/543913.

Full text
Abstract:
Multiple sclerosis (MS), considered the lead disease featuring demyelination, is the most common cause of non traumatic disability in young people. It is characterized by inflammation, progressive demyelination and gliosis, axonal injury and loss. The pathological hallmarks of all the subtypes of this disease are focal areas, called plaques, of demyelination in the CNS, with surrounding inflammation and neurodegeneration. Despite its high prevalence, multiple sclerosis remains a challenging ailment to study. Currently the most widely accepted hypothesis concerning MS pathogenesis is the autoim
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Dry mixes"

1

Lstiburek, Joseph W. Builder's guide: Hot-dry & mixed-dry climates. Building Science Corporation, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Conference, Camborne School of Mines International. Hot dry rock: Camborne School of Mines International Conferences. Robertson Scientific in association with CSM Associates, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

ill, Cepeda Joe, ed. A crazy mixed-up Spanglish day. Scholastic, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Montes, Marisa. A crazy mixed-up Spanglish day. Scholastic Press, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bottin, Janet. The muddledy fuddledy mixed-up day. Steck-Vaughn, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

New York (State). Legislature. Assembly. Standing Committee on Housing. Public hearing--mixed use housing projects. En-De Reporting, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Parker, Philip M. The 2007-2012 World Outlook for Dry Gravy and Sauce Mixes and Frosting Mixes. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

The 2006-2011 World Outlook for Dry Gravy and Sauce Mixes and Frosting Mixes. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Parker, Philip M. The 2007-2012 Outlook for Dry Gravy and Sauce Mixes and Frosting Mixes in India. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Parker, Philip M. The 2007-2012 Outlook for Dry Gravy and Sauce Mixes and Frosting Mixes in Japan. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Dry mixes"

1

Khaliullin, Marat, and Alsu Gilmanshina. "Dry Plaster Mixes Using Local Mineral Components." In Lecture Notes in Civil Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14623-7_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fadin, Yu M., O. M. Shemetova, V. P. Voronov, and V. S. Bogdanov. "Research Study of Mixing Processes in the Pneumatic Mixer for Dry Construction Mixes." In Lecture Notes in Civil Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20459-3_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Glagolev, E. S., V. S. Lesovik, L. H. Zagorodnyuk, and D. S. Podgornyi. "Composite Binders and Dry Building Mixes for 3D Additive Technologies." In Lecture Notes in Civil Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68984-1_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Khot, Somanath, Nitendra Palankar, Archana N. Shagoti, and B. M. Mithun. "Effect of Binder Type on the Properties of Dry Lean Concrete Mixes." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1862-9_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vysochinskiy, Dmitry, Gunnar Madsen, and Ingrid Lande. "An Experimental Study of Consistency and Strength Variation of 3D-Printed Concrete Mixes." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_1.

Full text
Abstract:
AbstractConcrete three-dimensional (3D) printing technology has the potential to significantly reduce on-site labour activities, as 3D-printed concrete eliminates the need for formwork. However, challenges persist in ensuring the quality and strength of 3D-printed concrete. One of the factors likely to impact its strength is the fluctuation of the water-to-binder ratio (w/b) during the printing process. In contrast to traditional cast-in-place concrete, where the mix is prepared at the factory with a fixed water-to-binder ratio, 3D-printed concrete is continuously mixed from a dry mix during p
APA, Harvard, Vancouver, ISO, and other styles
6

Saini, Mukesh, Praveen Aggarwal, and Sunil Chouhan. "Effects of Adding Polyethylene Terephthalate (PET) to Dense Bituminous Macadam Mixes Using the Dry Process." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2905-4_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chelgani, Saeed Chehreh, and Ali Asimi Neisiani. "Mixed Methods." In Dry Mineral Processing. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-93750-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Batiot-Dupeyrat, Catherine. "Dry Reforming of Methane." In Perovskites and Related Mixed Oxides. Wiley-VCH Verlag GmbH & Co. KGaA, 2015. http://dx.doi.org/10.1002/9783527686605.ch22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Carter, Jan. "Mixed Centres." In Day Services for Adults. Routledge, 2021. http://dx.doi.org/10.4324/9781003193692-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

White, Greg, and Finn Hall. "Comparing Wet Mixed and Dry Mixed Binder Modification with Recycled Waste Plastic." In RILEM Bookseries. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-46455-4_55.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dry mixes"

1

Nam, Jingak, William Hartt, Kijoon Kim, and Lianfang Li. "Effect of Cement Alkalinity Upon Time-to-Corrosion of Reinforcing Steel in Concrete Undergoing Chloride Exposure." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03290.

Full text
Abstract:
Abstract A series of 91 concrete G109 type specimens was exposed to cyclic wet-dry ponding with a 15 w/o NaCl solution for approximately four years. Mix design variables included 1) cement alkalinity (equivalent alkalinities of 0.97, 0.52, and 0.36), 2) water cement ratio (0.50, 0.41, and 0.37), 3) presence versus absence of coarse aggregate, and 4) presence versus absence of fly ash. Corrosion potential and macrocell current between bottom and top bars were monitored in order to determine the time at which active corrosion commenced. Subsequent to corrosion initiation, specimens were autopsie
APA, Harvard, Vancouver, ISO, and other styles
2

Charvin, Stephanie, William H. Hartt, Seungkyoun Lee, and Rodney G. Powers. "Influence of Premeability Reducing and Corrosion Inhibiting Admixtures in Concrete upon Initiation of Salt Induced Embedded Steel Corrosion." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00802.

Full text
Abstract:
Abstract While the utility of permeability reducing and corrosion inhibiting admixtures in concrete for forestalling the onset of corrosion initiation is generally recognized, there remains a general non-availability of long-term data upon which quantitative performance projections can be made. Of particular concern is that, while the rate of chloride ingress may be less for high performance concretes with pozzolanic admixtures compared to ordinary Portland cement concretes, the threshold chloride concentration for passive film breakdown and onset of active corrosion has been projected to be l
APA, Harvard, Vancouver, ISO, and other styles
3

Alghamdi, Talal M. "Determination of Corrosion Inhibitor Residuals in Dry Crude Oil." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-18769.

Full text
Abstract:
Abstract In the absence of adequate volume of aqueous phase in crude sample, it is a challenge to determine the corrosion inhibitor residuals concentration by conventional techniques. This work aims to solve this problem by providing an analytical technique to measure the corrosion inhibitor residuals in dry crude oil by extracting corrosion inhibitor residuals from crude oil into a saline water, which could be then quantified by any analytical instrumental means. A method was developed for the extraction of corrosion inhibitor residuals from treated crude oil samples by saline water. The vari
APA, Harvard, Vancouver, ISO, and other styles
4

Soufan, Raghad, Antoine Karam, and Ahmed Aajjan. "PHYTOSTABLIZATION OF SULPHIDE MINE TAILINGS." In 24th SGEM International Multidisciplinary Scientific GeoConference 2024. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/3.1/s13.33.

Full text
Abstract:
Orphaned or abandoned sulphide tailing disposal sites pose significant environmental hazards, including eolian dispersion, water erosion, acid mine drainage, and heavy metal mobility. Phytostabilization, an eco-friendly strategy, entails the use of alkaline amendments alongside non-native plant species capable of thriving in environments with high concentrations of heavy metals. A greenhouse experiment was conducted to assess the effect of a commercial cement which contained 46.3% sand, applied alone or combined with three magnesium (Mg) reagents on the shoot dry yield (DMY) of ryegrass (Loliu
APA, Harvard, Vancouver, ISO, and other styles
5

Tuthill, A. H., and D. E. Bardsley. "Performance of Highly Alloyed Materials in Chlorination Bleaching." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92323.

Full text
Abstract:
Abstract Mills are currently increasing chlorine dioxide substitution to 50% and more in the chlorination stage in order to reduce dioxins. Reexamination of the TAPPI Phase II data base indicates that up to, at least 48% chlorine dioxide substitution there is no significant difference in alloy performance as determined in the Phase II evaluation program in bleach plant washer environments. Phase II data on localized corrosion replotted provides new and better guidelines on boundary conditions. Based on the wide range in pH, residual chlorine, temperature and chloride covered in these exposures
APA, Harvard, Vancouver, ISO, and other styles
6

Curren, William J., John R. Martin, and Paul Gilson. "Design and Operating Characteristics of a Mixed Gas Environmental Chamber." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85326.

Full text
Abstract:
Abstract An environmental chamber for producing mixed gas environments at controlled temperatures and humidities is described. The various problems encountered during construction and start-up are discussed and the solutions to these problems detailed. Operating characteristics that affect system stability and day to day operation are described.
APA, Harvard, Vancouver, ISO, and other styles
7

Stenta, Aaron J., Brandon R. Rollins, Gerald Young, Narasi Sridhar, and Ramgopal Thodla. "An Integrated Probabilistic Approach to Predicting the Occurrence of Atmospheric Stress Corrosion Cracking of Dry Storage Canisters." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-18893.

Full text
Abstract:
Abstract Spent nuclear fuel (SNF) is currently stored in dry storage canisters (DSCs) at various reactor sites awaiting final disposal in a future repository site. Many DSCs are made from welded Type 304/304L stainless steel (UNS S30400/S30403) and then placed inside a concrete cask system with passive atmospheric air cooling. The most likely long-term degradation that may result in a breach of the DSC’s containment system is chloride induced stress corrosion cracking (CISCC). A precursor to CISCC is localized corrosion in the form of pit initiation and propagation. This paper describes a mode
APA, Harvard, Vancouver, ISO, and other styles
8

Turchin, Vadim, Stanislav Sychugov, Ludmila Yudina, et al. "Corrosion resistance dry building mortars base on alkaline slag binder for using in aggressive sulfate medium." In The 13th international scientific conference “Modern Building Materials, Structures and Techniques”. Vilnius Gediminas Technical University, 2019. http://dx.doi.org/10.3846/mbmst.2019.039.

Full text
Abstract:
Dry Building Mortars (DBM) are new in terms of building technology, and they sometimes substitute different kinds of concrete and mortar mixes. DBM have been successfully used in construction and their performance has been as efficient as the one of commercial mortar mixes, i.e. they boost labour efficiency, and bring down material consumption. They can be also kept in stock for a long time, and shipped with no compromise in quality. Today DBM are based on cementing components. And some famous mix mortars are based on gypsum, polymer, and some other types of cementing components which contain
APA, Harvard, Vancouver, ISO, and other styles
9

Volz, Frederic E. "IR extinction by mixed particles." In OSA Annual Meeting. Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oam.1990.mf5.

Full text
Abstract:
Most aerosol particles are of mixed composition. This raises the question of shifts and distortion of the IR bands of their constituents. Shifts of as much as −40 cm-1 have been found in wide-spaced bands of dry submicrometer particles consisting of internal mixes of alkali salts that were obtained by spraying solutions. Furthermore, overlapping bands merged. This was not observed with weaker and broader bands of ammonia salts. Comparison of these observations with theory is difficult because observed bands of small particles, especially if they are spheres, are much wider than is predicted by
APA, Harvard, Vancouver, ISO, and other styles
10

Alasfour, Fatemah. "Investigation on moisture susceptibility of asphalt mixtures containing ground tire rubber and de-vulcanized rubber." In Civil and Environmental Engineering for Resilient, Smart and Sustainable Solutions. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903414-115.

Full text
Abstract:
Abstract. The growing environmental threats of accumulating waste tires have raised the need to recycle and utilize them effectively, such as incorporating recycled crumb rubber in asphalt pavement mixtures. This paper aims to assess the incorporation of processed rubber from recycled tires on the moisture susceptibility of asphalt mixtures. For this purpose, two forms of recycled rubber were utilized; Ground Tire Rubber (GTR) and De-Vulcanized Rubber (DVR), with a constant content of 12.5% of bitumen by weight in a wet process. These modified binders were used to prepare asphalt mixture sampl
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Dry mixes"

1

El Badawy, Amro, and Ashraf Rahim. Evaluation of Nanoclay Additives for Improving Resistance to Moisture Damage in Hot Mix Asphalt (HMA). Mineta Transportation Institute, 2023. http://dx.doi.org/10.31979/mti.2023.2151.

Full text
Abstract:
Transportation has an enormous impact on the U.S. economy and on the lives of all Americans. Many modes of transportation rely on pavement, but pavement conditions deteriorate over time because of the combined effects of traffic and climate. Exposure to moisture often causes premature failure of asphalt pavements as it reduces the stiffness of the asphalt and enables stripping of the asphalt from the aggregate. This research evaluates the effectiveness of clay nanomaterials (i.e., nanoclays) in improving the resistance of hot mix asphalt (HMA) to moisture damage and compares the enhancement re
APA, Harvard, Vancouver, ISO, and other styles
2

Sevim, H. Management of dry flue gas desulfurization by-products in underground mines. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/578490.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Anderson, R., R. Hendron, M. Eastment, and A. Jalalzadeh-Azar. Building America Residential System Research Results. Achieving 30% Whole House Energy Savings Level in Hot-Dry and Mixed-Dry Climates. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/1219244.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

IBACOS. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in the Hot-Dry and Mixed-Dry Climates. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/875763.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Maeglin, R. R., and R. S. Boone. Evaluation of mixed hardwood studs manufactured by the Saw-Dry-Rip (SDR) process. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1985. http://dx.doi.org/10.2737/fpl-rn-249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Creamer, Elizabeth. Contemporary Mixed Methods Research. Instats Inc., 2023. http://dx.doi.org/10.61700/s0sqns3fhs62h469.

Full text
Abstract:
This 3-day seminar offers a comprehensive understanding of mixed methods research, focusing on its integration and theoretical approach. Participants will acquire skills such as crafting a mixed methods purpose statement, creating diverse visual displays that combine data from various sources, and designing a procedural diagram that shows the integration points in the research process. The seminar is based on the seminar leader's two textbooks on mixed methods, and each day ends with a chance to win a complimentary copy of one of these books. An official Instats certificate of completion will
APA, Harvard, Vancouver, ISO, and other styles
7

Creamer, Elizabeth. Contemporary Mixed Methods Research. Instats Inc., 2023. http://dx.doi.org/10.61700/ellubimu8hji0469.

Full text
Abstract:
This 3-day seminar offers a comprehensive understanding of mixed methods research, focusing on its integration and theoretical approach. Participants will acquire skills such as crafting a mixed methods purpose statement, creating diverse visual displays that combine data from various sources, and designing a procedural diagram that shows the integration points in the research process. The seminar is based on the seminar leader's two textbooks on mixed methods, and each day ends with a chance to win a complimentary copy of one of these books. An official Instats certificate of completion will
APA, Harvard, Vancouver, ISO, and other styles
8

Baechler, Michael C., Marye G. Hefty, Jennifer L. Williamson, Kathleen A. Ruiz, Rosemarie Bartlett, and Pat M. Love. Building America Best Practices Series, Volume 9: Builders Challenge Guide to 40% Whole-House Energy Savings in the Hot-Dry and Mixed-Dry Climates. Office of Scientific and Technical Information (OSTI), 2009. http://dx.doi.org/10.2172/973448.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chugh, Y., D. Dutta, and S. Esling. Management of dry flue gas desulfurization by-products in underground mines. Quarterly report, January--March 1995. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/89488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chugh, Y., D. Dutta, S. Esling, et al. Management of dry flue gas desulfurization by-products in underground mines. Quarterly report, October--December 1994. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/67489.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Dry mixes' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography