Relevant bibliographies by topics / Electrical steel manufacturing process

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Electrical steel manufacturing process'

Author: Grafiati
Published: 4 June 2021
Last updated: 5 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrical steel manufacturing process.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrical steel manufacturing process"

1

Singh, Jagtar, and Pulak M. Pandey. "Process optimization for rapid manufacturing of complex geometry electrical discharge machining electrode." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, no. 1 (2019): 66–81. http://dx.doi.org/10.1177/0954406219874845.

Full text
Abstract:
Rapid manufacturing techniques permit tools and dies to be fabricated in short duration of time with complex geometry. The major contribution of the present research was to fabricate copper complex geometry electric discharge machining electrode by using amalgamation of three-dimensional printing along with pressureless loose sintering. Response surface methodology was employed to study the sintering parameters’ (sintering temperature, heating rate and soaking time) effect on electric discharge machining electrode important characteristics such as density, shrinkage and electrical conductivity
APA, Harvard, Vancouver, ISO, and other styles
2

Gil, Ruben, J. A. Sánchez, N. Ortega, S. Plaza, B. Izquierdo, and I. Pombo. "Analysis of Micro-Pin Manufacturing Using Inverse Slab Electrical Discharge Milling (ISEDM) Process." Key Engineering Materials 496 (December 2011): 247–52. http://dx.doi.org/10.4028/www.scientific.net/kem.496.247.

Full text
Abstract:
Abstract. This paper analyses the technological capabilities of a novel rotary (EDM) electrical discharge machining process for the manufacturing of high aspect ratio cylindrical micro-components. The process is called Inverse Electrical Discharge Grinding (ISEDM). An experimental analysis has been carried out on high speed steel (tool steel Vanadis 23), using a conventional EDM machine and graphite electrode. The effect of pulse off-time, work piece final diameter and machining length on material removal rate, electrode wear ratio, radial accuracy and surface roughness has been quantified. Fr
APA, Harvard, Vancouver, ISO, and other styles
3

Kestens, Leo, and Sigrid Jacobs. "Texture Control During the Manufacturing of Nonoriented Electrical Steels." Texture, Stress, and Microstructure 2008 (April 16, 2008): 1–9. http://dx.doi.org/10.1155/2008/173083.

Full text
Abstract:
Methods of modern quantitative texture analysis are applied in order to characterize the crystallographic texture of various non-oriented electrical steel grades in view of their relation with the magnetic properties of the steel sheet. A texture parameter is defined which quantifies the density of ‹100› easy magnetic directions in the sheet planes. An extensive correlation study revealed the relation of this parameter with the hysteresis losses, determined at an induction of 1.5 T, and with the induction measured at an applied external field of 25 A/cm. It is shown that the latter magnetic pr
APA, Harvard, Vancouver, ISO, and other styles
4

Batista, Márcio, Valdir Furlanetto, and Sérgio Duarte Brandi. "Development of a Resistance Spot Welding Process Using Additive Manufacturing." Metals 10, no. 5 (2020): 555. http://dx.doi.org/10.3390/met10050555.

Full text
Abstract:
For several decades, the electrical resistance spot welding process has been widely used in the manufacturing of sheet metal structures, especially in automotive bodies. During this period there was no significant development for this welding process. However, in recent years, in order to meet the demand for lighter, economical, and low-cost vehicles, the automotive manufacturing industry is undergoing a revolution in the use of high strength steel sheet combinations, chemical compositions, and of different thicknesses. In this context, the present work focuses on the study and development of
APA, Harvard, Vancouver, ISO, and other styles
5

Chandra, Aditi, Mao Takashima, Joey Li, et al. "Considerations and Methodology to Determine R2R Manufacturing and Scaling of Electronic Devices on Flexible Stainless Steel Foil Substrates." MRS Advances 2, no. 18 (2017): 1029–36. http://dx.doi.org/10.1557/adv.2017.274.

Full text
Abstract:
ABSTRACTStainless steel substrates enable a combination of low cost, flexibility, durability, high processing temperatures, and sub-100 um thickness making it well suited for sheet based and roll-to-roll processing. NFC (13.56 MHz) based circuits using high performance polysilicon TFTs on steel sheets have been manufactured using a hybrid printed process in a production environment. The process scheme utilizes a hybrid, additive materials approach encompassing low cost manufacturing steps such as slot die coating and screen printing of silicon and dopant inks to enable a high throughput, low c
APA, Harvard, Vancouver, ISO, and other styles
6

Reclaru, Lucien, and Lavinia Cosmina Ardelean. "Evaluation of Passivation Process for Stainless Steel Hypotubes Used in Coronary Angioplasty Technique." Coatings 11, no. 4 (2021): 448. http://dx.doi.org/10.3390/coatings11040448.

Full text
Abstract:
In the manufacturing of hypotubes for coronary applications, austenitic steels of types 304, 304, or 316 L are being used. The manufacturing process involves bending steel strips into tubes and the continuous longitudinal welding of the tubes. Manufacturing also includes heat treatments and stretching operations to achieve an external/internal diameter of 0.35/0.23 mm, with a tolerance of +/− 0.01 mm. Austenitic steels are sensitive to localized corrosion (pitting, crevice, and intergranular) that results from the welding process and various heat treatments. An extremely important step is the
APA, Harvard, Vancouver, ISO, and other styles
7

Daem, Andries, Peter Sergeant, Luc Dupré, Somsubhro Chaudhuri, Vitaliy Bliznuk, and Leo Kestens. "Magnetic Properties of Silicon Steel after Plastic Deformation." Materials 13, no. 19 (2020): 4361. http://dx.doi.org/10.3390/ma13194361.

Full text
Abstract:
The energy efficiency of electric machines can be improved by optimizing their manufacturing process. During the manufacturing of ferromagnetic cores, silicon steel sheets are cut and stacked. This process introduces large stresses near cutting edges. The steel near cutting edges is in a plastically deformed stress state without external mechanical load. The magnetic properties of the steel in this stress state are investigated using a custom magnetomechanical measurement setup, stress strain measurements, electrical resistance measurements, and transmission electron microscopic (TEM) measurem
APA, Harvard, Vancouver, ISO, and other styles
8

Gischner, B., P. Lazo, K. Richard, and R. Wood. "Enhancing Interoperability Throughout the Design and Manufacturing Process." Journal of Ship Production 22, no. 03 (2006): 172–83. http://dx.doi.org/10.5957/jsp.2006.22.3.172.

Full text
Abstract:
As part of the National Shipbuilding Research Program (NSRP) program, various tools and standards have been developed to enable the efficient exchange of product models during the design process. In particular, the Integrated Shipbuilding Environment (ISE) Project has developed and demonstrated the capability for successful transfer of structural, piping, and heating, ventilation, and air-conditioning (HVAC) product models that could be used in detail design. During 2005, NSRP awarded a project for ISE Interoperability Modules (known as ISE4). This project will expand the testing and implement
APA, Harvard, Vancouver, ISO, and other styles
9

Zhou, Ming Lin, Liang Wang, Zi Jian Wang, Yi Lin Wang, and Yi Sheng Zhang. "Analysis of the Design and Mechanical Performance about Hot Stamping Power Fitting Products." Advanced Materials Research 1063 (December 2014): 272–75. http://dx.doi.org/10.4028/www.scientific.net/amr.1063.272.

Full text
Abstract:
Hot stamping ultra-high strength steel not only plays an important role in automotive field, but also has potential application in transmission line fittings industry. According to the current development status of Chinese electrical power fittings and the demand for new technique, combined with hot stamping technology, a new solution for reduction of weight in transmission line fittings has been proposed. This paper focuses on a new lightweight connection fitting with multilayer stack structure of ultra-high strength boron steel, and the key issue in design and manufacturing process of the de
APA, Harvard, Vancouver, ISO, and other styles
10

Sarma, Mridusmita, Florian Borchers, Gerrit Dumstorff, Carsten Heinzel, and Walter Lang. "Measuring strain during a cylindrical grinding process using embedded sensors in a workpiece." Journal of Sensors and Sensor Systems 6, no. 2 (2017): 331–40. http://dx.doi.org/10.5194/jsss-6-331-2017.

Full text
Abstract:
Abstract. This paper presents the results of using a sensor-integrated workpiece for in situ measurement of strain during an outer-diameter cylindrical grinding process. The motivation of this work is to measure in situ process parameters using integrated sensors in a workpiece in order to characterize the manufacturing process. Resistive sensors that operate on the same principle as conventional strain gauges were fabricated on wafers made of steel using standard microtechnology and later the wafers were diced to form unique sensor-integrated steel components (sensor inlays). These inlays are
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Electrical steel manufacturing process"

1

Xu, Ye. "Kilowatt Three-phase Rotary Transformer Design for Permanent Magnet DC Motor with On-rotor Drive System." Thesis, Mittuniversitetet, Avdelningen för elektronikkonstruktion, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-27781.

Full text
Abstract:
The aim of this thesis is to design a kilowatt three-phase step-down rotary transformer for a permanent magnet DC motor. The permanent magnet DC motor has an on-rotor drive system, and therefore requiring a power supply that can transfer power to its drive unit without mechanical contact. The rotary transformer has a detached magnetic coupling structure that qualifies it as a potential method for the wireless power transfer. This thesis studies the rotary transformer as a static device, focusing on its core loss. By using a transient finite element analysis of COMSOL Multiphysics and an iron l
APA, Harvard, Vancouver, ISO, and other styles
2

Han, Tianyang. "Ultrasonic Additive Manufacturing of Steel: Process, Modeling, andCharacterization." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1607039366940573.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Matar, Hattan Saleh. "Evaluating dust exposure from steel manufacturing electrical arc furnaces." Online version, 2009. http://www.uwstout.edu/lib/thesis/2009/2009matarh.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Medrow, David (David Robert) 1968. "Cost modeling of a manufacturing process." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9986.

Full text
Abstract:
Thesis (M.S.)--Massachusetts Institute of Technology, Sloan School of Management; and, Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1998.<br>Includes bibliographical references (leaf 45).<br>by David Medrow.<br>M.S.
APA, Harvard, Vancouver, ISO, and other styles
5

Okonkwo, Christopher Ndubuisi. "Electricity Reform| The Case of Sourcing and Cost Management in Steel Manufacturing." Thesis, Walden University, 2016. http://pqdtopen.proquest.com/#viewpdf?dispub=10244881.

Full text
Abstract:
<p>In 2014, Lazard levelized cost of energy analysis model priced diesel powered systems at $0.225 ? $0.404/KWh and a range of $0.165 ? $0.242/KWh for gas-powered systems. The model gave a range of $0.28 ? $0.33/kWh for diesel and a range of $0.14/kWh ? $0.16/kW for gas fired. Nigeria has an abundance of gas reserves, but heavy gas flaring by oil companies perpetuates power failure across Nigeria. What has resulted is an unreliable electricity infrastructure and a high cost of alternative energy. The Electricity Power Sector Reform Act of 2005 started the reform process. Guided by decision the
APA, Harvard, Vancouver, ISO, and other styles
6

Persson, George. "Process development for H13 tool steel powder in binder jet process." Thesis, Högskolan i Gävle, Maskinteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-32694.

Full text
Abstract:
Additive manufacturing brings versatility and new degree of freedom for part design and manufacturing possibilities. Binder jetting is powder bed printing technique that does not require direct energy transfer rather binding powder metal particles through mechanical entanglement by use of the organic binder. The polymer chains in the solution hardens when heated thus creating a green part. Green parts are sintered in high temperature to adhere metal powder particles together creating a solid body. Binder jetting still developing to its full potential in scalability and material portfolio. This
APA, Harvard, Vancouver, ISO, and other styles
7

Mahmood, Tariq. "Knowledge-based process planning and design system for the cold forging of steel." Thesis, Imperial College London, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264352.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Emanuelsson, Linus, and Erik Folker. "Value stream mapping of the grinding process in the manufacturing of steel products." Thesis, Linköpings universitet, Kommunikations- och transportsystem, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-143868.

Full text
Abstract:
Till följd av en långvarig nedåtgående trend för den europeiska stålindustrin har stålbolagens behov av en effektiv logistik, med därtill kopplade kostnadsbesparingar, ökat. För att kunna förbättra sin interna logistik krävs att företag kan planera sin produktion väl samtidigt som resurser utnyttjas så effektivt som möjligt, med minimalt slöseri. I syfte att identifiera en koppling mellan produktegenskaper och bearbetningstid och därmed skapa ett underlag för bättre produktionsplanering och framtida processförändringar, genomförs en värdeflödeskartläggning för slipavdelningen hos Stål AB i Nor
APA, Harvard, Vancouver, ISO, and other styles
9

Amar, Ajay 1964. "Reduction of process monitoring in semiconductor chip manufacturing." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/9742.

Full text
Abstract:
Thesis (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; and (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1999.<br>Includes bibliographical references (leaf 40).<br>This thesis concerns in-line inspection scheduling policies in semiconductor chip manufacturing. Intel uses extensive monitoring (inspections) in the manufacturing process. While the inspections help safeguard process stability and boost manufacturing yield, they also account for a substantial fraction of the company's variable manufacturing costs. I
APA, Harvard, Vancouver, ISO, and other styles
10

Mammen, Siju Abraham. "Techno–economic investigation into nuclear centred steel manufacturing / Mammen, S.A." Thesis, North-West University, 2011. http://hdl.handle.net/10394/7054.

Full text
Abstract:
With the rising electricity, raw material and fossil fuel prices, as well as the relatively low selling price of steel, the steel industry has been put under strain to produce steel as cost–effectively as possible. Ideally the industry requires a cost–effective, stable source of energy to cater for its electricity and energy needs. Modern High Temperature Reactors are in a position to provide industries with not only electricity, but also process heat. Therefore, a study was conducted into the economic viability of centering the steel industry on nuclear power. This study considered 3 technolo
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Electrical steel manufacturing process"

1

Fu za sheng chan guo cheng ji cheng hua guan li li lun yu fang fa: Ji yu gang tie qi ye sheng chan wu liu guan li shi jiao = Integrated management theory and method for complex production process : based on the perspective of production logistic management in steel enterprise. Ke xue chu ban she, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

1967-, Brennan Attracta, and Browne Jimmie, eds. Strategic decision making in modern manufacturing. Kluwer Academic, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop (6th 1995 Cambridge, Mass.). IEEE/SEMI 1995 Advanced Semiconductor Manufacturing Conference and Workshop: Theme, "Semiconductor manufacturing : economic solutions for the 21st century" : ASMC 95 proceedings, November 13-15, 1995, Cambridge, Massachusetts. Institute of Electrical and Electronics Engineers, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

IEEE/SEMI, Advanced Semiconductor Manufacturing Conference and Workshop (9th 1998 Boston Massachusetts). 1998 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop: Theme--Semiconductor manufacturing: meeting the challenges of the global marketplace : ASMC 97 : proceedings : September 23-25, 1998, Boston, Massachusetts. IEEE, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Minerals, Metals and Materials Society. Meeting, Association for Iron & Steel Technology, Minerals, Metals and Materials Society. Extraction and Processing Division, and TMS Solidification Committee, eds. Sensors, sampling, and simulation for process control: Proceedings of a symposium sponsored by the Process Technology and Modeling Committee and the Solidification Committee of the Extraction and Processing Division of TMS (The Minerals, Metals & Materials Society) and Association for Iron and Steel Technology (AIST), held during the TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA, February 27-March 3, 2011. Wiley, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop (8th 1997 Cambridge, Mass.). 1997 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop: Theme--the quest for semiconductor manufacturing excellence: leading the charge into the 21st century, September 10-12, 1997, Cambridge, Massachusetts : ASMC 97 proceedings. IEEE Service Center, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop (12th 2001 Munich, Germany). ASMC 2001: The 12th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference [and Workshop : Advancing the science of semiconductor manufacturing excellence] : April 23-24, International Conference Center, Munich Germany / sponsored by: [IEEE] Electron Devices Society ... [et al.]. IEEE, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop (8th 1997 Cambridge, Mass.). 1997 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop: ASMC 97 proceedings : September 10-12, 1997, Cambridge, Massachusetts. Institute of Electrical and Electronics Engineers, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bore, Henry. The Story of the Invention of Steel Pens (With a Description of the Manufacturing Process by which They are Produced). IndyPublish, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

IEEE Electron Devices Society, IEEE Components, and Manufacturing Technology Society. Semiconductor Manufacturing Conference & Workshop (Asmc): 2001 IEEE/Semi Advanced. Institute of Electrical & Electronics Enginee, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Electrical steel manufacturing process"

1

Mohanty, Shalini, Partha Bhattacharyya, Alok Kumar Das, and Amit Rai Dixit. "Enhancement of Surface Properties of High Speed Steel Using Powder Mixed Micro-electrical Discharge Process." In Advances in Manufacturing Engineering and Materials II. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71956-2_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yin, Ruiyu. "Engineering Science in Steel Manufacturing Process." In Metallurgical Process Engineering. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-13956-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Masuzawa, T. "Sensors for Process Monitoring: Electrical Discharge Machining." In Sensors in Manufacturing. Wiley-VCH Verlag GmbH, 2002. http://dx.doi.org/10.1002/3527600027.ch4f.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Suesaowaluk, Poonphon. "Multidimensional Process Analytical System for Manufacturing Management." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-47200-2_88.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Chao. "Analysis of Steel-Aluminum Metal-Laminate Leveling Process." In Lecture Notes in Electrical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9437-0_101.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Fuming, and Jianxin Xie. "Green Manufacturing Process of Shougang Jingtang Steel Plant." In The Minerals, Metals & Materials Series. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-52333-0_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nicolich, N., P. Persi, and M. Reini. "The Process Plan Sequence in Steel Structures Welding of Great Diesel Engines." In Advances in Manufacturing. Springer London, 1999. http://dx.doi.org/10.1007/978-1-4471-0855-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Shuai, Lilan Liu, Yiping Wu, and Yi Wang. "The Algorithm Knowledge Base for Steel Production Process Optimization." In Lecture Notes in Electrical Engineering. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-5768-7_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Yang, Fei Wang, and Zhuo Wang. "An Intelligent Diagnosis Algorithm for Oxygen Decompressor Manufacturing Process." In Lecture Notes in Electrical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5959-4_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shen, Y. F., D. D. Gu, and Y. F. Pan. "Balling Process in Selective Laser Sintering 316 Stainless Steel Powder." In Advances in Machining & Manufacturing Technology VIII. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-999-7.357.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electrical steel manufacturing process"

1

Khal, Abdelrahim, Brandt J. Ruszkiewicz, and Laine Mears. "Springback Evaluation of 304 Stainless Steel in an Electrically Assisted Air Bending Operation." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8736.

Full text
Abstract:
Driven by the automotive industry’s drive towards lightweighting, electrically assisted forming (EAF) is one of the most rapidly growing research fields in bulk deformation, and is classified under the general term “Electrically-Assisted Manufacturing (EAM)”. In EAF electric current (continuous or intermittent) is applied to a metallic sheet during the forming process, leading to numerous advantageous effects that have been studied and proven by several research groups and for different structural metals, such as reduced forming load and flow stress, increased formability, and reduction (or ev
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Xun, Shuhuai Lan, Xianli Qiao, and Jun Ni. "Study of Plunge Stage for a Hybrid Friction Stir Welding Process Based on Electro-Plastic Effect." In ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9457.

Full text
Abstract:
In this study, an electrically assisted friction stir welding (FSW) system has been designed and developed. Additional electrodes are assembled and stay in the close proximity of the tool as the tool translates along the weldline. Plunge stage of FSW process has been studied for both aluminum alloy Al 6061 and TRIP 780 steel based on this developed experimental configuration. An effective axial force reduction can be consistently observed after application of a continuous current. In order to compare the relative significance of the associated resistance thermal effect, the workpiece has been
APA, Harvard, Vancouver, ISO, and other styles
3

Ratković Kovačević, Nada, Miša Stević, Miloš Milešević, Srđan Maksimović, Đorđe Dihovični, and Zoran Stević. "Automation of a copper wire manufacturing process using up-casting method – subsystem for induction heating." In 8th International Conference on Renewable Electrical Power Sources. SMEITS, 2020. http://dx.doi.org/10.24094/mkoiee.020.8.1.279.

Full text
Abstract:
The aim of the research presented here is to design and implement a system for automatic production of copper wire, by the method of up-casting. The subsystem for induction heating includes automatic control of the temperature of the melted as well as annealed copper, automatic regulation of the induction heating power. The induction coil was designed and made to provide proper heating of the copper wire that is produced, so that the necessary temperature can be reached and its annealing or melting obtained. The coil is made of copper tube and its temperature is regulated using forced oil flow
APA, Harvard, Vancouver, ISO, and other styles
4

Joslin, Andrew, Manuel Hernandez, Erick Deane, Schadrick Collins, Chengying Xu, and Don F. Wilson. "Experimental Setup for Multi-Sensor Fusion and Data Correlation Analysis During CNC Steel Turning Process." In ASME 2010 International Manufacturing Science and Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/msec2010-34308.

Full text
Abstract:
This paper discusses a preliminary setup for an ongoing research project with goals of off-line modeling and optimization for a CNC turning process of AISI 4137 steel alloy; followed by online monitoring, optimization, and control of the machining process. A full factorial Design Of Experiment (DOE) of three machining parameter factors was created in Minitab™ and Analysis of Variance was performed, in order to determine which parameters influenced the machining process the most. Accelerometers, acoustic emission sensors and force sensors have given researchers insights into the relationships b
APA, Harvard, Vancouver, ISO, and other styles
5

Liles, Howard, and J. Rhett Mayor. "Initial Investigation Into Helical Milling of Laminated Stacks of Electrical Steel." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7239.

Full text
Abstract:
This paper serves to report the findings of an initial study on the holing of laminated stacks of electrical steels. Three different holing methods were considered: plunge milling, helical milling (orbit milling), and drilling. Stack delamination, axial thrust force, and burr formation were measured at various feed rates for each process and utilized as comparison metrics. Results from the initial experimental investigation indicate that drilling produces significant burr and plunge milling, whilst reducing burr formation compared to drilling, led to delamination of the stack. Helical milling
APA, Harvard, Vancouver, ISO, and other styles
6

Salandro, Wesley A., Cristina Bunget, and Laine Mears. "Modeling and Quantification of the Electroplastic Effect When Bending Stainless Steel Sheet Metal." In ASME 2010 International Manufacturing Science and Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/msec2010-34043.

Full text
Abstract:
Automotive manufacturers are continuously striving to meet economic demands by designing and manufacturing more efficient and better performing vehicles. To aid this effort, many manufacturers are using different design strategies such to reduce the overall size/weight of certain automotive components without compromising strength or durability. Stainless steel is a popular material for such uses (i.e. bumpers and fuel tanks) since it possesses both high strength and ductility, and it is relatively light for its strength. However, with current forming processes (e.g., hot working, incremental
APA, Harvard, Vancouver, ISO, and other styles
7

Gischner, B., P. Lazo, K. Richard, and R. Wood. "Enhancing Interoperability Throughout the Design & Manufacturing Process." In SNAME Maritime Convention. SNAME, 2005. http://dx.doi.org/10.5957/smc-2005-p21.

Full text
Abstract:
As part of the NSRP program, various tools and standards have been developed to enable the efficient exchange of product models during the design process. In particular, the ISE Project has developed and demonstrated the capability for successful transfer of structural, piping, and HVAC product models that could be used in detail design. During 2005, NSRP awarded a project for ISE Interoperability Modules (known as ISE4). This project will expand the testing and implementation of ISE tools to support both early stage design and manufacturing efforts. An International Standard (ISO 10303-215: A
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Kai, Xun Liu, and Jun Ni. "Electrically Assisted Friction Stir Spot Welding of Aluminum Alloy to Advanced High Strength Steel." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2803.

Full text
Abstract:
This paper studies an electrically assisted friction stir spot welding (FSSW) process for joining aluminum alloy 6061-T6 to TRIP 780 steel. The electrical current shows to reduce the axial plunge force and assist the material flow of the aluminum matrix during the welding process. When electrical pulses and direct current (DC) with the same energy input are applied, the results show insignificant differences. Bulk material flow can be observed in the weld cross sections. A more uniform hook is generated at the Fe/Al interface after applying the current. Besides, the diffusion of aluminum atoms
APA, Harvard, Vancouver, ISO, and other styles
9

Karumatt, Nived Govind, Brandt J. Ruszkiewicz, and Laine Mears. "Electrically Assisted Drilling of Usibor 1500 Boron Steel and its Implications for Electrically Assisted Machining." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-3046.

Full text
Abstract:
With the increasing demands in the automotive industry for passenger safety and higher structural strength and stiffness, the automotive industry is using more advanced high strength steels. The ability to reduce tool wear and drilling forces in post forming drilling of high strength steel parts is of high importance to the automotive industry. Electrically assisted drilling is a process in which electric current is passed through the drill bit to the workpiece resulting in local softening, and allowing for a reduction in cutting forces and potential increase in tool life. In this paper, tungs
APA, Harvard, Vancouver, ISO, and other styles
10

Jones, Joshua J., and Laine Mears. "Constant Current Density Compression Behavior of 304 Stainless Steel and Ti-6Al-4V During Electrically-Assisted Forming." In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50287.

Full text
Abstract:
A metal forming technique which has more recently come of interest as an alternative to processes that use elevated temperatures at some stage during manufacturing is Electrically-Assisted Forming (EAF). EAF is a processing technique which applies electrical current through the workpiece concurrently while the material is being formed. At present, this method has only been studied on an experimental level in laboratory settings, and the heuristic results show increased fracture strain, reduced flow stress, and reduced springback; the enhanced process capability is beyond the range that would b
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Electrical steel manufacturing process' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography