Log in

Relevant bibliographies by topics / End clearance

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'End clearance'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'End clearance.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "End clearance"

1

Hsu, Han-Kai, and Jong-Ning Aoh. "Effect of Clearances in Mill Stands on Strip End Motion During Finishing Rolling." Metals 9, no. 7 (2019): 727. http://dx.doi.org/10.3390/met9070727.

Full text

Abstract:

The process stability of finishing mill is significantly influenced by the clearance between the chocks and housing in mill stands. The on-site data of a finishing mill had shown that the clearances in the finishing mill stands were clearly associated with the incidence of strip end flip. The aim of this work was to establish a numerical model to analyze the effect of the clearances on the deviation of the centerline of the strip and on the incidence of strip end flip. By adopting conditions from a particular strip, the numerical model not only predicted the strip end shape, but also visualize

APA, Harvard, Vancouver, ISO, and other styles

2

Symons, J. G. "Experimental Investigation of Natural Convection in Partially Divided Enclosures." Journal of Heat Transfer 108, no. 3 (1986): 554–59. http://dx.doi.org/10.1115/1.3246970.

Full text

Abstract:

An experimental study has been performed on natural convective heat transfer in inclined enclosures heated from below, and with partitions running in the up-slope direction (see Fig. 1). The influence of a clearance between the partitions and the lower heated isothermal surface is considered. This problem is of particular importance in solar collector design. Heat transfer rates have been measured for Ra < 107, enclosure inclination of 0, 30, 60, and 90 deg from the horizontal, and partition end clearances ranging from zero up to half the enclosure height. A flow visualization study which c

APA, Harvard, Vancouver, ISO, and other styles

3

Desai, Mahesh R., S. K. Raghunath, T. Manohar, and Shrivastav Prajay. "Lower-Caliceal Stone Clearance Index to Predict Clearance of Stone after SWL." Journal of Endourology 20, no. 4 (2006): 248–51. http://dx.doi.org/10.1089/end.2006.20.248.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Jun, Yong Wu, Hong Mei Tang, Chun Ren Tang, and Xian Hua Li. "Numerical Simulation of the Gear Flowmeter Reveal Based on Pumplinx." Applied Mechanics and Materials 687-691 (November 2014): 679–83. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.679.

Full text

Abstract:

The oil spill will directly affect the measuring accuracy of the gear flowmeter, so use the computational fluid dynamics software to calculate the leakage regulation of the internal gear flowmeter is one of the important things. Based on Pumplinx, when the end clearances of the gear flowmeter were 0um, 10um, 20um, 30um, 40um and 50um, the corresponding numerical analysis of spillage was carried out. From the results of numerical analysis, with the increase of the end clearance, the leakage amplification will also increase. In practical work, we should control the end clearance of gear flowmete

APA, Harvard, Vancouver, ISO, and other styles

5

Toomes, H., and A. Linder. "Mucociliary Clearance Following Tracheal Resection and End-To-End Anastomosis." Thoracic and Cardiovascular Surgeon 37, no. 05 (1989): 277–80. http://dx.doi.org/10.1055/s-2007-1020332.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Liu, Jie, Bing Li, Wei Jin, Luofeng Han, and Shuanglu Quan. "Experiments on clearance identification in cantilever beams reduced from artillery mechanism." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, no. 6 (2016): 1010–32. http://dx.doi.org/10.1177/0954406216631372.

Full text

Abstract:

Clearances existing in artillery mechanism cause the muzzle disturbance and reduce the artillery firing accuracy. If the parameters of the clearance nonlinearity can be identified by taking advantage of the dynamic information, the quantitative relation between the clearance and muzzle disturbance can be established, and then the clearances of such nonlinear system can be controlled in a reasonable range to improve the artillery firing accuracy. This paper proposed a nonlinear identification method for the cantilever beam with clearances reduced from barrel-cradle structure. A modified restori

APA, Harvard, Vancouver, ISO, and other styles

7

Saha, L. K., and J. C. Van Stone. "Differences between KT/V Measured during Dialysis and KT/V Predicted from Manufacturer Clearance Data." International Journal of Artificial Organs 15, no. 8 (1992): 465–69. http://dx.doi.org/10.1177/039139889201500804.

Full text

Abstract:

We retrospectively analyzed data from 3,863 dialysis treatments in 329 end-stage renal disease patients over a period of 33 months to evaluate the accuracy of in vitro KT/V estimated by manufacturer's urea clearance data in relation to in vivo measured KT/V. In 1,087 urea clearances measured, mean actual clearance was 87% of predicted. At all blood flows, actual clearances were significantly lower than predicted (8-16% lower than predicted). In 2,807 KT/V measurements, predicted KT/V was 1.238 ± 0.005 whereas the mean of actual measured KT/V was 16% lower or 1.024 ± 0.005 (P < 0.0001). At d

APA, Harvard, Vancouver, ISO, and other styles

8

Ping-guo, Zou, Zhang Zhen-tao, and Li Gang. "Research on the Influence of Steam Turbine Seal Leakage." E3S Web of Conferences 248 (2021): 01014. http://dx.doi.org/10.1051/e3sconf/202124801014.

Full text

Abstract:

CFD was employed to simulate the steam flow in 1.5-stage cascades with three different seal clearances. When the seal clearance is 0, there is no steam seal leakage, no obvious secondary flow in the cascade, and the stage efficiency reaches 88.27%. When the clearance of diaphragm seal and rotor tip seal is 1mm, the leakage of diaphragm seal strongly interferes with the flow in the cascade, which promotes the formation and development of the end-wall secondary flow near rotor hub, and the rotor tip leakage flow has little effect on next stage, and the stage efficiency drops by about 2 percentag

APA, Harvard, Vancouver, ISO, and other styles

9

Zhang, Ziwei. "Simulation Study on the Influence of Injector Coupling Leakage on Fuel Injection." Journal of Physics: Conference Series 2097, no. 1 (2021): 012014. http://dx.doi.org/10.1088/1742-6596/2097/1/012014.

Full text

Abstract:

Abstract In order to study the effect of fuel leakage of an ultra-high pressure common rail injector control valve coupling on fuel injection performance, a simulation model was established by AMESim and the accuracy was verified by fuel injection test data. The leakage law of couples with different clearances was analyzed by using numerical simulation method and then the influence of control valve coupling on fuel injection performance was analyzed. The results demonstrate that the increase of the matching clearance of the slide valve coupling makes the start time of needle valve advanced and

APA, Harvard, Vancouver, ISO, and other styles

10

Li, Xinjian, Lingfeng Tang, and Ming Qian. "Steady-State Flow Characteristics and End Clearance Optimization of Internal Gear Grease Pump." Advances in Materials Science and Engineering 2021 (May 28, 2021): 1–16. http://dx.doi.org/10.1155/2021/8293040.

Full text

Abstract:

The internal gear grease pump is a mechanical device used for transfer of high viscosity fluid. The existing clearance between the end faces of the internal or external gear and the floating side plate might cause pump leakage during operation. In order to obtain the optimal end clearance of the internal gear grease pump, the rheological features of the lubricating lithium-based grease for various temperatures are explored via rotating rheometer. Shear force and apparent viscosity are chosen as monitored experimental parameters. The experimental data is fitted to obtain grease rheological feat

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "End clearance"

1

Ozer, Ahmet. "Increased Bacterial Adherence and Decreased Bacterial Clearance in Urinary Tract Infections with Diabetes Mellitus." Case Western Reserve University School of Graduate Studies / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=case1376406476.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Калініченко, Павло Михайлович, Павел Михайлович Калиниченко, Pavlo Mykhailovych Kalinichenko та О. В. Орел. "Рациональное использование силы трения торцовой пары гидростатического уплотнения". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40518.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Лісовенко, Дмитро Володимирович, Дмитрий Владимирович Лисовенко, Dmytro Volodymyrovych Lisovenko, Андрій Васильович Загорулько, Андрей Васильевич Загорулько та Andrii Vasylovych Zahorulko. "Экспериментальное исследование торцовых затворных импульсных уплотнений". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40580.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Карпова, В. О. "Розрахунок статичних характеристик гідростатичних ущільнень із саморегульованим зазором". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40335.

Full text

Abstract:

Розглянуті гідростатичні ущільнення котрі забезпечують надійну роботу у широкому діапазоні тисків і частот обертання. Ущільнення являють собою систему автоматичного регулювання торцевого зазору і витоків ущільнюваної рідини і осьової рівноваги рухомого кільця побудовані статичні характеристики : залежність торцевого зазору і витоків від тиску ущільнюваної рідини.

APA, Harvard, Vancouver, ISO, and other styles

5

Таран, Г. І. "Аналіз динаміки аксіально-рухомого кільця гідростатичного ущільнення із саморегулювальним зазором". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40387.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wilcock, Donna Marie. "Mechanisms of ß-Amyloid Clearance by Anti-Aß Antibody Therapy." Scholar Commons, 2004. https://scholarcommons.usf.edu/etd/1301.

Full text

Abstract:

Alzheimers disease (AD) is defined as a progressive neurodegenerative disorder that gradually destroys a persons memory and ability to learn. There are three pathological hallmarks of the disease which are necessary for diagnosis of AD, these are; extracellular amyloid plaques composed of [beta]-amyloid (A[beta]) protein, intracellular neurofibrillary tangles and neuronal loss. Amyloid plaques exist as both compact deposits which stain with Congo red and more numerous diffuse deposits. Active immunization against A[beta] 1-42 or passive immunization with monoclonal anti-A[beta] antibodies redu

APA, Harvard, Vancouver, ISO, and other styles

7

Zhang, Da. "Evaluation of the Allometric Exponents in Prediction of Human Drug Clearance." VCU Scholars Compass, 2014. http://scholarscompass.vcu.edu/etd/3533.

Full text

Abstract:

Background. Allometric scaling (AS) is widely used in predicting human clearance (CL) based on animal data. Substantial prediction errors have been commonly observed and various modifications to AS have not provided a broad reliable improvement. In this study, an extensive data set was assembled including animal and human systemic CL and physiochemical properties. The allometric exponents were calculated based on multiple species AS and single-species AS methods. The correlations between the allometic exponents and physiochemical properties were evaluated in an attempt to find covariates that

APA, Harvard, Vancouver, ISO, and other styles

8

Wilcock, Donna Marie. "Mechanisms of [beta]-amyloid clearance by anti-a[beta] antibody therapy." [Tampa, Fla.] : University of South Florida, 2004. http://purl.fcla.edu/fcla/etd/SFE0001169.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mitchell, Steven. "HEURISTIC PRIORITIZATION OF EMERGENCY EVACUATION STAGING TO REDUCE CLEARANCE TIME." Doctoral diss., University of Central Florida, 2006. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4433.

Full text

Abstract:

A region's evacuation strategy encompasses a variety of areas and needs. Primary among these is the minimization of total evacuation time, represented in models as the clearance time estimate (CTE). A generic testbed simulation network model was developed. An input/output (I/O) analysis was performed to establish a theoretical baseline CTE. Results were compared with simulations; analysis showed that the I/O method underestimated simulated CTE as a function of network size, with a correction factor range of 1.09 to 1.19. A regression model was developed for the generic network. Predictors were

APA, Harvard, Vancouver, ISO, and other styles

10

Desai, Ushang Prakshbhai. "Use of Spirometry for Medical Clearance and Surveillance in Occupations Requiring Respirator Use." Scholar Commons, 2015. http://scholarcommons.usf.edu/etd/5933.

Full text

Abstract:

Medical certification of workers for respirator use is an important activity of occupational medicine health professionals. Spirometry is a diagnostic tool to evaluate respiratory distress/insufficiency that may affect respirator use. In this study, we analyzed the pulmonary function data of 337 workers from different occupations which required medical evaluation to wear a respirator. The American Thoracic Society and National Fire Protection Association criteria were used to evaluate employees. Of 337 workers who were cleared for respiratory use on the basis of medical questionnaires for resp

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "End clearance"

1

Clearance & Settlements Systems Status Reports: Year End 1990. Group of Thirty, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fervenza, Fernando C. Evaluation of Kidney Function, Glomerular Disease, and Tubulointerstitial Disease. Oxford University Press, 2012. http://dx.doi.org/10.1093/med/9780199755691.003.0472.

Full text

Abstract:

Several measures are used to evaluate kidney function: serum creatinine, urinalysis, renal clearance, and renal imaging. Creatinine is an end product of muscle catabolism and is commonly used as a filtration marker. Dysmorphic erythrocytes in the urinary sediment indicate bleeding in the upper urinary tract. A urine pH less than 5.5 excludes type 1 renal tubular acidosis. A pH greater than 7 suggests infection. Acidic urine is indicative of a high-protein diet, acidosis, and potassium depletion. Alkaline urine is associated with a vegetarian diet, alkalosis and urease-producing bacteria. Clear

APA, Harvard, Vancouver, ISO, and other styles

3

Bieber, Scott D., and Jonathan Himmelfarb. Haemodialysis. Edited by Jonathan Himmelfarb. Oxford University Press, 2015. http://dx.doi.org/10.1093/med/9780199592548.003.0258.

Full text

Abstract:

The development of haemodialysis for the treatment of chronic kidney disease was a remarkable step in medicine that moved what was once a universally fatal organ failure to a condition that is regarded as treatable. Over the decades since that remarkable advancement, mechanical methods of blood purification to correct the uraemic condition have gained a prominent and often expected role in the care of the patient with end-stage kidney failure. Even so, patients with end-stage kidney disease still experience high rates of morbidity and mortality, at times surpassing other chronic conditions suc

APA, Harvard, Vancouver, ISO, and other styles

4

Ronco, Claudio, and William R. Clark. Haemodialysis. Edited by Jonathan Himmelfarb. Oxford University Press, 2015. http://dx.doi.org/10.1093/med/9780199592548.003.0257.

Full text

Abstract:

End-stage renal disease (ESRD) is common clinical condition for which life-sustaining therapies fortunately exist. On a global basis, more than 2 million patients now receive chronic haemodialysis (HD) for treatment of ESRD. For the vast majority of these patients, treatment is provided in a dialysis unit on a thrice-weekly basis, although there is growing interest in alternative therapies which vary with respect to location or frequency. Based on the number of patients requiring chronic HD now and in the foreseeable future, it is imperative that nephrologists understand the basic principles u

APA, Harvard, Vancouver, ISO, and other styles

5

Gold, Roberta. Introduction. University of Illinois Press, 2017. http://dx.doi.org/10.5406/illinois/9780252038181.003.0001.

Full text

Abstract:

This book explores the emergence of New York City's tenant movement as the leading voice for an alternative vision of residence and citizenship against the backdrop of suburban expansion. It considers how tenants responded to the unprecedented housing crisis that faced New Yorkers at the end of World War II and discusses their positions on three public policy questions: public housing, slum clearance, and civil rights. It also examines the tenants' creation of labor-union cooperatives and their fight against “urban renewal”; the struggle over the rent strikes that erupted in Harlem and other g

APA, Harvard, Vancouver, ISO, and other styles

6

Mathieson, Robert. The Survival of the Unfittest: The Highland Clearances and the End of Isolation. John Donald Publishers, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Test No. 319A: Determination of in vitro intrinsic clearance using cryopreserved rainbow trout hepatocytes (RT-HEP). OECD, 2018. http://dx.doi.org/10.1787/9789264303218-en.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Test No. 319B: Determination of in vitro intrinsic clearance using rainbow trout liver S9 sub-cellular fraction (RT-S9). OECD, 2018. http://dx.doi.org/10.1787/9789264303232-en.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Saxena, Anjali Bhatt. Peritoneal dialysis. Edited by Jonathan Himmelfarb. Oxford University Press, 2015. http://dx.doi.org/10.1093/med/9780199592548.003.0265.

Full text

Abstract:

Dialysis adequacy is a term used to describe how well any dialysis therapy effectively mitigates some of the uraemic complications of end-stage renal disease. In the simplest terms, dialysis adequacy measures the dose of dialysis and judges it to be sufficient (adequate) or insufficient (inadequate). In peritoneal dialysis, adequacy refers to the ability of dialysis to perform any or all of myriad tasks including (a) removing metabolic waste products, (b) maintaining proper fluid balance and blood pressure control, (c) removing excess electrolytes, (d) correcting acid–base imbalances, (e) main

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "End clearance"

1

Okhionkpamwonyi, Solomon, Fengshou Gu, and Andrew D. Ball. "Dynamic Responses of Clearance Induced Impacts in Big End Bearing Condition Monitoring of Diesel Engines." In Proceedings of IncoME-VI and TEPEN 2021. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99075-6_31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Radin Umar, Radin Zaid, Muhammad Naqiuddin Khafiz, Nazreen Abdullasim, Nadiah Ahmad, and Jalaluddin Dahalan. "Conceptual Architecture Development of Virtual Reality – Motion Capture System to Analyze Accessibility and Clearance in Front-End Engineering Design Process: An Exploratory Study." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8954-3_33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lu, Xueliang, Luis San Andrés, and Bonjin Koo. "On the Influence of the Lubricant Feed Orifice Size and End Plate Seals’ Clearance on the Static and Dynamic Performance of Integral Squeeze Film Dampers." In Proceedings of the 11th IFToMM International Conference on Rotordynamics. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-40455-9_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Joo, Tang Mui, and Chan Eang Teng. "Behaviors and Patterns of TV News Viewing in Malaysia During and After Covid-19 Pandemic." In Lecture Notes in Networks and Systems. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4581-4_3.

Full text

Abstract:

AbstractThe demise of Television (TV) news before Covid-19 has been an attention when people have shifted to online platforms for online news. Covid-19 Pandemic has changed the demand for TV news. The media landscape in Malaysia has then been reengineered by the impact of it. Driven by the theory of Fear Appeal in the information searching about Covid-19 during Malaysian Movement Control Order (MCO), TV news viewing has increased. This research aims to study the behaviors and patterns of TV news consumption during Covid-19 Pandemic in Malaysia. It is also to study the significance of TV news t

APA, Harvard, Vancouver, ISO, and other styles

5

Bompoint, Caroline, Alberto Castagna, Daphna Hutt, et al. "Transplant Preparation." In The European Blood and Marrow Transplantation Textbook for Nurses. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-23394-4_4.

Full text

Abstract:

AbstractHSCT is a complex procedure, which involves a long and complicated pathway for the patient and the intervention of many health professionals. Within this multidisciplinary team, the transplant coordinator, usually a nurse, is the ‘essential marrow’, the heart and the vital backbone of this procedure; they are an essential transplant ingredient facilitating a fluidity of the pathway and a good transmission of information. Written information about the procedure is beneficial for patients either prior to clinic visit or during clinic to allow the patients and relatives to reflect on conv

APA, Harvard, Vancouver, ISO, and other styles

6

Fuentes, Marilou B., and Cheah Wei Keat. "Laparoscopic Adrenalectomy: Retroperitoneal Approach." In Mastering Endo-Laparoscopic and Thoracoscopic Surgery. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3755-2_27.

Full text

Abstract:

AbstractWith the advent of advances in radiologic imaging, there is an increase in the number of diagnosed cases of Adrenal Incidentaloma (adrenal mass ≥ 1 cm diameter, discovered on imagining done for other organs). Prevalence of which is around 2% and noted to increase with age, affecting 4% of middle-aged and increases to 10% in elderly patients. Tumor of the adrenal gland more than 4 cm in diameter or if the mass enlarges by 1 cm during observation period is recommended to be surgically removed after thorough endocrine clearance. The concept of minimally invasive surgery changed the approa

APA, Harvard, Vancouver, ISO, and other styles

7

Kim, Nam-Ho, Ashok V. Kumar, and Harold F. Snider. "Mutual Perpendicular: Assembly End Clearance." In Geometry of Design. Elsevier, 2014. http://dx.doi.org/10.1533/9781782421740.231.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Franconi, Tyler, and Chris Gosden. "Long-Term Interactions between Society and Ecology." In English Landscapes and Identities. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198870623.003.0004.

Full text

Abstract:

The clearance history of England is reviewed looking first at what can be reconstructed of the patterns of forest and clearance across the country. A broad distinction is seen between more forested landscapes in the north and west, with greater clearance in the south and east. The forests of the north may have seen managed grazing, rather than being wild wood. From the start of the Roman period, the north was cleared as well, creating greater similarity across the country as a whole. We also look at the history of soil erosion, which is linked to clearance. We end by comparing two river basins

APA, Harvard, Vancouver, ISO, and other styles

9

N., Raghu, Balamurugan M., Trupti V. N., et al. "Wireless Power Transfer for High End and Low End EV Cars." In Advances in Civil and Industrial Engineering. IGI Global, 2023. http://dx.doi.org/10.4018/978-1-6684-8816-4.ch004.

Full text

Abstract:

In recent years, resonant inductive power transfer is also being used in wireless power systems for portable computers, phones, and other electronics. Wireless charging uses WPT technology, which has the benefits of safe operation, reduced emissions, and cheap maintenance costs. In recent years, resonant inductive power transfer is also being used in wireless power systems for portable computers, phones, and other electronics. Wireless charging uses WPT technology, which has the benefits of safe operation, reduced emissions, and cheap maintenance costs. In practicality there are different type

APA, Harvard, Vancouver, ISO, and other styles

10

Scally, Robert James. "Ballykilcline: Deputies and Defendants." In The End Of Hidden Ireland. Oxford University PressNew York, NY, 1995. http://dx.doi.org/10.1093/oso/9780195055825.003.0005.

Full text

Abstract:

Abstract The name of the townland of Ballykilcline appeared on the Ordnance Survey Map of Ireland of 1841 and again in 1886. In between, although it continued intact in the memory and usage of the few people who still lived there, its official existence was uncertain, present in some surveys but overlooked in others. That was because the names of townlands identified not places as much as their occupants and were liable to lose their meaning when their occupants departed. Their physical presence, the uncut stone or turf and thatch dwellings, the “semi-underground” dwellings described by Tocque

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "End clearance"

1

Hanqing, Liang, Wang Dan, Li Aobing, et al. "Strategies for Suppressing Overvoltages at Distributed New Energy Stations in the Receiving-End Grid Following Fault Clearance." In 2024 4th Power System and Green Energy Conference (PSGEC). IEEE, 2024. http://dx.doi.org/10.1109/psgec62376.2024.10720977.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Zhu, Yuqing, Huidong Xu, and Changjiang Deng. "Compact Dual-Polarized End-Fire Phased Array Antenna With Zero Ground Clearance for 5G mm-Wave Mobile Terminals." In 2024 IEEE MTT-S International Wireless Symposium (IWS). IEEE, 2024. http://dx.doi.org/10.1109/iws61525.2024.10713527.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

George, Kurian K., S. N. Agnimitra Sunkara, Jubin Tom George, Melvin Joseph, A. M. Pradeep, and Bhaskar Roy. "Investigations on Stator Hub End Losses and its Control in an Axial Flow Compressor." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-26845.

Full text

Abstract:

In an axial flow compressor, the presence of separated flow near the hub-end of a stator would result in an overall loss in the performance. In the present paper, stator hub-stall is attempted to be eliminated for a high hub-tip ratio (0.8) axial flow compressor stage consisting of a highly loaded rotor and stator. Numerical and experimental studies on an untreated straight stator (straight-stacked, twisted) blade show a large vortex near its hub. The large vortex is attempted to be reduced by modifying the present blade by (i) providing an additional twist at the hub-end of the stator blade (

APA, Harvard, Vancouver, ISO, and other styles

4

Santhiranayagam, B. K., D. T. H. Lai, R. K. Begg, and M. Palaniswami. "Estimation of end point foot clearance points from inertial sensor data." In 2011 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE, 2011. http://dx.doi.org/10.1109/iembs.2011.6091604.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

De Cecco, S., M. I. Yaras, and S. A. Sjolander. "Measurements of the Tip-Leakage Flow in a Turbine Cascade With Large Clearances." In ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/95-gt-077.

Full text

Abstract:

Measurements have been made for tip clearances up to 15% of chord in a turbine cascade which has been used previously to study the tip-leakage flow at smaller clearances. The work is part of a study of the aerodynamics of turbines which have experienced in-service damage and is related to Engine Health Monitoring. Detailed flow field measurements have been made upstream and downstream of the cascade and static pressure distributions have been measured on the endwall and at the midspan of the blade. The most unexpected result was that the blade end losses (that is, the sum of the secondary and

APA, Harvard, Vancouver, ISO, and other styles

6

Gibson, Lee, Stephen Spence, Charles Stuart, Andre Starke, and Sung In Kim. "On the Effect of Side Clearance in the Vaned Diffuser of a Centrifugal Compressor." In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-82423.

Full text

Abstract:

Abstract Environmental and regulatory pressures have prompted original equipment manufacturers (OEMs) to explore highly boosted internal combustion (IC) engines as a means to minimize toxic air pollutants and meet strict legislative targets. The exhaust gas turbocharger is a key technology used to achieve the boost pressures necessary for advanced engines of the future. Centrifugal compressors with vaneless diffusers have been widely implemented in turbochargers for IC engines, particularly passenger vehicles, mainly due to their compact size and ability to deliver high pressure ratios over a

APA, Harvard, Vancouver, ISO, and other styles

7

Asgar Ali, K., Quamber H. Nagpurwala, Abdul Nassar, and S. V. Ramanamurthy. "Numerical Studies on the Effect of Tip Clearance and Tip Cooling Flow on Endwall Losses of an Unshrouded Axial Turbine Rotor." In ASME 2013 Gas Turbine India Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gtindia2013-3568.

Full text

Abstract:

This paper deals with the numerical investigations on a low pressure axial turbine stage to assess the effect of variation in rotor tip clearance and tip coolant ejection rate on the end wall losses. The rotor, along with the NGV, was modeled to represent the entire turbine stage. The CFX TASCflow software was used to perform steady state analysis for different rotor tip clearances and different tip coolant ejection rates. The locations of the cooling slots were identified on the blade tip and the coolant ejection rate was specified at these areas. The simulations were carried out with tip cle

APA, Harvard, Vancouver, ISO, and other styles

8

San Andrés, Luis, Sung-Hwa Jeung, and Gary Bradley. "Forced Coefficients for a Short Length, Open-Ends Squeeze Film Damper With End Grooves: Experiments and Predictions." In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-43096.

Full text

Abstract:

Squeeze Film Dampers (SFDs) are effective to ameliorate shaft vibration amplitudes and to suppress instabilities in rotor-bearing systems. Compact aero jet engines implement ultra-short length SFDs (L/D ≤ 0.2) to satisfy stringent weight and space demands with low parts count. This paper describes a test campaign to identify the dynamic forced response of an open ends SFD (L=25.4 mm, D=125.7 mm), single film land and oil fed through three holes (120° apart), operating with similar conditions as in an aircraft engine. Two journals make for two SFD films with clearances cA=0.129 mm and cB=0.254

APA, Harvard, Vancouver, ISO, and other styles

9

Yue, Guoqiang, Shengqi Yin, and Qun Zheng. "Numerical Simulation of Flow Fields of Variable Geometry Turbine With Spherical Endwalls or Nonuniform Clearance." In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59737.

Full text

Abstract:

To rotate the vane of variable geometry turbine, the end walls contours of the turbine have to be spherical. If the end walls are cylinders, there will be nonuniform clearances between the ends of the vane and the end walls. In these two cases, the flow fields of the rotated vanes are simulated and compared. Special attentions are paid to the flows in the spherical clearances and nonuniform clearances under four rotating angles. The leakage flow and the loss are investigated and analyzed in this paper.

APA, Harvard, Vancouver, ISO, and other styles

10

Tweedt, D. L., T. H. Okiishi, and M. D. Hathaway. "Stator Endwall Leading-Edge Sweep and Hub Shroud Influence on Compressor Performance." In ASME 1986 International Gas Turbine Conference and Exhibit. American Society of Mechanical Engineers, 1986. http://dx.doi.org/10.1115/86-gt-197.

Full text

Abstract:

The use of stator endwall leading-edge sweep to improve axial-flow compressor stator row performance was examined experimentally. The aerodynamics of three stator hub (inner diameter) conditions, namely, a running clearance, a stationary clearance, and a shroud were also investigated. Leading-edge sweep in the endwall regions of a stator blade can be beneficial in terms of loss reduction on the casing (outer diameter) end of a stator blade. It can also help at the hub end of a stator blade when either a stationary hub clearance or a hub shroud is used. A leading-edge sweep is detrimental (loca

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "End clearance"

1

Rimpel, Aaron, Abhay Patil, and Mark Anguiano. PR-316-21201-R01 A Study of the Effects of Liquid Contamination on Seal Performance. Pipeline Research Council International, Inc. (PRCI), 2022. http://dx.doi.org/10.55274/r0012229.

Full text

Abstract:

This project is a continuation of research to enhance dry gas seal (DGS) reliability. Previous work reviewed failures from literature and experience of manufacturers and end-users and identified that liquid contamination was the most common cause, but it was concluded there was insufficient quantitative data to base recommendations on for further DGS reliability enhancements. Therefore, experimental and analytical investigations were pursued to fill the void. The ultimate objective was to be able to predict DGS failures due to liquid contamination, which could lead to greater DGS reliability t

APA, Harvard, Vancouver, ISO, and other styles

2

Foster, John, and Jr. Report of the Defense Science Board Task Force on Unexploded Ordnance (UXO) Clearance, Active Range UXO Clearance, and Explosive Ordnance Disposal (EOD) Programs. Defense Technical Information Center, 1998. http://dx.doi.org/10.21236/ada345904.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

SEISMIC PERFORMANCE AND REPLACEABILITY OF STEEL FRAME STRUCTURES WITH REPLACEABLE BEAM SEGMENTS. The Hong Kong Institute of Steel Construction, 2024. http://dx.doi.org/10.18057/ijasc.2024.20.1.8.

Full text

Abstract:

This study assessed the seismic performance and replaceability of steel frame structures incorporating replaceable beam segments. A reduced-beam-section beam-column joint featuring a replaceable energy dissipation beam segment was specifically designed for this purpose. The joint underwent quasi-static analysis subjected to low-cycle reciprocating loading. The study extended to a single-story, single-span plane steel frame, where reduced-beam-section beam-column joints with replaceable energy dissipation beam segments were analyzed for hysteretic and deformation behavior. Moreover, the explora

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!