Relevant bibliographies by topics / End mills

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'End mills'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'End mills.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "End mills"

1

Perminov, A. E., S. V. Babin, and E. Yu Prokof’ev. "Machining with End Mills." Russian Engineering Research 38, no. 3 (2018): 180–81. http://dx.doi.org/10.3103/s1068798x18030164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vickers, G. W., and K. W. Quan. "Ball-Mills Versus End-Mills for Curved Surface Machining." Journal of Engineering for Industry 111, no. 1 (1989): 22–26. http://dx.doi.org/10.1115/1.3188728.

Full text
Abstract:
The use of end-mills for machining low curvature surfaces is examined in relation to the more popular ball-mills. End-mills are shown to give a better match to the required surface geometry and hence reduce the number of surface passes required. They also have a much better efficiency of material removal and longer tool life. It is shown that the use of end-mills for curved surface work can typically reduce the overall cutting time by a factor of twenty-four.
APA, Harvard, Vancouver, ISO, and other styles
3

Tandon, Puneet, Phalguni Gupta, and Sanjay G. Dhande. "Geometric Modeling of End Mills." Computer-Aided Design and Applications 2, no. 1-4 (2005): 57–65. http://dx.doi.org/10.1080/16864360.2005.10738353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Park, Simon S., Yusuf Altintas, and Mohammad Movahhedy. "Receptance coupling for end mills." International Journal of Machine Tools and Manufacture 43, no. 9 (2003): 889–96. http://dx.doi.org/10.1016/s0890-6955(03)00088-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pukhal’skii, V. A., V. A. Panaioti, and P. V. Pukhal’skii. "Attaching plates to end mills." Russian Engineering Research 29, no. 8 (2009): 817–19. http://dx.doi.org/10.3103/s1068798x09080140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mokritskii, B. Ya, V. Yu Vereshchagin, E. B. Mokritskaya, S. A. Pyachin, S. V. Belykh, and A. S. Vereshchagin. "Composite hard-alloy end mills." Russian Engineering Research 36, no. 12 (2016): 1030–32. http://dx.doi.org/10.3103/s1068798x16120108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yawara, Praphan, and Naphatara Intanon. "A Comparative study of Wear and tool life of HSS TiN coated end mills and WC uncoated end mills." MATEC Web of Conferences 264 (2019): 01006. http://dx.doi.org/10.1051/matecconf/201926401006.

Full text
Abstract:
The objective of this research is to compare the performance and economic value of TiN coated end mills and WC end mills on S45C slot milling. The commercial end mills that produce and provide by SAN Engineering and Supply Co., Ltd. and commercial S45C steels, were selected for this investigation. The models of wear were analyzed by the scanning electron microscope, SEM. The result showed that the wear models of the TiN coated end mills are abrasive and surface peeling, while the wear models of WC end mills are adhesive and uniform micro-chipping on the cutting edges. The analysis the economic
APA, Harvard, Vancouver, ISO, and other styles
8

Andreev, V., S. Molodyk, S. Minaylov, YA Minenko, M. Nadolsky, and E. Neginsky. "Comparative tests of end carbide mills." Stankoinstrument, no. 1 (2019): 92–94. http://dx.doi.org/10.22184/24999407.2019.14.01.92.94.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Петраков, Юрій Володимирович, and Олександр Сергійович Мацківський. "OPTIMIZATION OF END MILLS PERIPHERY MILLING." Journal of Mechanical Engineering the National Technical University of Ukraine "Kyiv Polytechnic Institute" 1, no. 76 (2016): 88–94. http://dx.doi.org/10.20535/2305-9001.2016.76.61261.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kolesov, K. N. "Model of hard-alloy end mills." Russian Engineering Research 30, no. 3 (2010): 285–86. http://dx.doi.org/10.3103/s1068798x10030196.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "End mills"

1

Newby, Glynn. "Empirical analysis of cutting force constants in micro end milling operations." Thesis, Available online, Georgia Institute of Technology, 2005, 2005. http://etd.gatech.edu/theses/available/etd-05202005-082651/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nguyen, Tony. "Trochoidal Milling of AlSiCp with CVD Diamond Coated End Mills." Scholarly Commons, 2018. https://scholarlycommons.pacific.edu/uop_etds/3128.

Full text
Abstract:
Metal matrix composites have seen a rise in demand within the last decade. Aluminum alloy reinforced with silicon carbide particles is a type of particle metal matrix composite that has seen applications in the aerospace, ground transportation, and electronics industry. However, the abrasive SiC particles have made this material difficult to machine through conventional machining strategies. This research will focus on using computer aided manufacturing with trochoidal tool paths to maximize machining productivity and extend the tool life of CVD diamond coated end mills. The focus of this rese
APA, Harvard, Vancouver, ISO, and other styles
3

Freitag, Karl P. "Two-Axis Force Feedback Deflection Compensation of Miniature Ball End Mills." NCSU, 2004. http://www.lib.ncsu.edu/theses/available/etd-10012004-185454/.

Full text
Abstract:
The primary objective of this research is to improve dimensional tolerances and reduce total manufacturing time of precision milling operations through the implementation of force-feedback machining. Force-feedback machining consists of using real-time cutting force measurement integrated with high bandwidth actuation to provide active error compensation of tool deflection. This research focuses on the development and implementation force-feedback machining using miniature (< 1 mm diameter) ball end mills. Due to the thin geometry of these tools, deflection of the tool during machining results
APA, Harvard, Vancouver, ISO, and other styles
4

Cox, Daniel. "Development of a Nanometric Machining Center for Ultraprecision Manufacturing." Thesis, Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/6841.

Full text
Abstract:
The demand for reduced-size components and devices is pervasive throughout industrial and commerical sectors. This drive to reduce the achievable size of parts and features has furthered the developmen of processes and tools capable of micro scale fabrication. In particular, one of the directions this field has taken is in scaling down traditional machine tools. Being a relatively young area of manufacturing, the area of miniaturized machining is still developing and a significant portion of work remains yet to be done. As a thorough understanding of this area is still developing, experimenta
APA, Harvard, Vancouver, ISO, and other styles
5

Середенко, Б. Н., та В. В. Вовк. "Влияние угла опережения на загрузку режущей части сферических концевых фрез". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38141.

Full text
Abstract:
Актуальной задачей машиностроения является обеспечение высокой производительности и качества обработки фасонных поверхностей на станках с ЧПУ сферическими концевыми фрезами при получистовой и чистовой обработке. При разработке конструкций такого инструмента, расчетах на прочность и назначении режимов резания возникает задача анализа загрузки режущих кромок, одним из основных показателей которой является площадь срезаемого слоя, определяющая возникающие в процессе обработки силы резания.
APA, Harvard, Vancouver, ISO, and other styles
6

Vančura, Tomáš. "Silové zatížení řezných nástrojů při obrábění." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417517.

Full text
Abstract:
The theoretical part of the diploma thesis summarizes a knowledge of the force loading of the cutting tools and state of the art in the cutting force measurement. In the experimental part, work deals with the development of the software for a force records analysis. The main objective of the software is to automatise the processing and analysis of the measured force records. The functionality of the newly created software was verified by evaluating the circle-segment end mills experiments performed at the Institute of Manufacturing Technology of the Faculty of Mechanical Engineering, BUT.
APA, Harvard, Vancouver, ISO, and other styles
7

Mills, Christian Robert. "Online and virtual education: it's effectiveness and impact on high school mathematics and science students." Montana State University, 2011. http://etd.lib.montana.edu/etd/2011/mills/MillsC0811.pdf.

Full text
Abstract:
This descriptive research paper discusses the effects of online instruction on high school mathematics students. The project was designed to determine if students enrolled in online mathematics and science courses can or will receive a level of instruction comparable to students who take their high school mathematics courses in a traditional classroom. It is desired that students in online courses make progress during the semester or year equal to or within a range of those students in traditional courses. Online education has the potential to bring quality education to those students who may
APA, Harvard, Vancouver, ISO, and other styles
8

Mills, Paul S. "'Margaret danced through Neil Armstrong' : readers responding to Susan Power's spiritual fiction /." Electronic version (PDF), 2003. http://dl.uncw.edu/etd/2003/millsp/paulmills.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Samadli, Vugar. "Rotor-bearing system dynamics of a high-speed micro end mill spindle." [Gainesville, Fla.] : University of Florida, 2006. http://purl.fcla.edu/fcla/etd/UFE0015756.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Thompson, Michael B. "Development of a five-axis machining algorithm in flat end mill roughing /." Diss., CLICK HERE for online access, 2005. http://contentdm.lib.byu.edu/ETD/image/etd823.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "End mills"

1

Merrill, John N. Turn right at Land's End: The story of the first walk around the entire coastline of Britain-6,824 miles. J.N.M.Pubns., 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Blanc, Annie. L'abbaye de Lagrasse: Mille ans de sculpture. Nouvelles presses du Languedoc, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Navarrete Jiménez, Clemencia, and Jorge Alberto Gámez Gutierrez. Breve esbozo de la empresa de familia. Universidad de La Salle. Ediciones Unisalle, 2010. http://dx.doi.org/10.19052/1900618723.

Full text
Abstract:
En años recientes el mundo académico incorporó un nuevo término: la empresa de familia (EF). En Colombia existen miles de EF que representan más del 65% del tejido empresarial y son un objeto de estudio muy llamativo para investigadores y consultores. En esta obra se recogen múltiples definiciones y características de la EF: su gestión, la intención de heredar, las formas de interacción entre familia, empresa y propiedad, los ciclos vitales y los retos de estas organizaciones, cuales son profesionalización e internacionalización. Se presentan varias direcciones de páginas de Internet de instit
APA, Harvard, Vancouver, ISO, and other styles
4

Ulrich, Marzolph, Leeuwen Richard van, and Wassouf Hassan, eds. The Arabian nights encyclopedia. ABC-CLIO, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sapin, Jean-Claude. Méthode thérapeutique par Qi Gong chinois: La remarquable et traditionnelle méthode d'autoguérison pratiquée par les Chinois depuis plus de trois mille ans. Saint-Jean, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Magnaghi, Alberto, ed. La regola e il progetto. Firenze University Press, 2014. http://dx.doi.org/10.36253/978-88-6655-624-4.

Full text
Abstract:
Il territorio, conteso tra mille interessi conflittuali, ha sempre più bisogno di una progettazione unitaria in quanto bene comune, alla scala in cui si abita, si lavora, si consuma: una scala che comprende luoghi urbani, reti di città, fiumi, valli, zone agricole, entroterra costieri. Rispetto al progetto architettonico e urbano, il progetto di territorio ha regole disciplinari molto più episodiche e settoriali. Esito toscano di una ricerca nazionale sul “progetto di territorio”, questo volume propone il concetto di bioregione urbana come metodologia atta ad integrare analisi e progetti su: i
APA, Harvard, Vancouver, ISO, and other styles
7

Sutton, David, James Waters, Marc Abraham, and Christopher E. Grimes. Dog by dog: End puppy mills now. 2017.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

The 2006-2011 World Outlook for High-Speed Steel End Mills for Machine Tools and Metalworking Machinery Excluding Inserted Blade Types and Shell Mills. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Parker, Philip M. The 2007-2012 World Outlook for High-Speed Steel End Mills for Machine Tools and Metalworking Machinery Excluding Inserted Blade Types and Shell Mills. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

The 2006-2011 World Outlook for End Mills and Milling Cutters for Machine Tools and Metalworking Machinery. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "End mills"

1

Aurich, Jan C., Ingo Reichenbach, and Martin Bohley. "Ultra small Micro End Mills." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_16681-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aurich, Jan, Ingo Reichenbach, and Martin Bohley. "Ultra-small Micro End Mills." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-20617-7_16681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Aurich, Jan C., Ingo Reichenbach, and Martin Bohley. "Ultra Small Micro End Mills." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_16681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Twardowski, Paweł, Patryk Welsant, and Marek Rybicki. "Technological Aspects of Regeneration of Carbide End Mills." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49910-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ko, Sung-Lim, Trung-Thanh Pham, and Yong-Hyun Kim. "Visualization Process for Design and Manufacturing of End Mills." In Fuzzy Systems and Knowledge Discovery. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11539506_141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

D’Hoker, Eric, and D. H. Phong. "Lectures on Supersymmetric Yang-Mills Theory and Integrable Systems." In Theoretical Physics at the End of the Twentieth Century. Springer New York, 2002. http://dx.doi.org/10.1007/978-1-4757-3671-7_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sadek, M. M. "Fabrication of Carbide Tipped End Mills by Epoxy Resin Adhesive Bonding." In Industrial Applications of Adhesive Bonding. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3419-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Globisch, Steffen, Markus Friedrich, and Frank Döpper. "Method to Simulate the Dynamic Behavior of Micro Ball End Mills." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77429-4_65.

Full text
Abstract:
AbstractInstable process behaviour is one of the biggest challenges in micromilling and has a significant impact on tool wear. This leads to reduced workpiece quality and higher scrap. Therefore, it increases the resource and energy consumption. This paper presents a new simulation method and uses the example of a micro ball end mill for machining X37CrMoV5-1 to show how tool deflection and process forces can be determined as a function of individual process parameters and how optimal process kinematics can be achieved. For this purpose, the individual modelling steps are presented and it is e
APA, Harvard, Vancouver, ISO, and other styles
9

Grabowski, R., B. Denkena, and J. Köhler. "Process Force and Stability Prediction of End Mills with Unequal Helix Angles." In Lecture Notes in Production Engineering. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-01964-2_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bogoyavlensky, A. V., and A. V. Shatilo. "Computer-Aided Design of Precast End Mills Based on the Parametric Model." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-54817-9_63.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "End mills"

1

Ma, Ruitang, Junmin Zheng, Qiuyu Jiang, and Hepeng Huang. "Research on grinding parameters for machining spiral grooves on solid carbide end mills using an arc-shaped edge of the grinding wheel." In 2024 5th International Conference on Mechatronics Technology and Intelligent Manufacturing (ICMTIM). IEEE, 2024. http://dx.doi.org/10.1109/icmtim62047.2024.10629289.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Klapper, Helmuth Sarmiento, Krutibas Panda, Anthony Collins, et al. "Redefining Corrosion Resistance Requirements for CrMn-Stainless Steels Used in Drilling Applications – Results from a Round Robin Experiment." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16881.

Full text
Abstract:
Abstract Directional drilling is a well-known and established technology having a long tradition within the oil and gas industry. Because of their versatility, austenitic CrMn-stainless steels are the most commonly used materials in non-magnetic drill collars including sophisticated directional, measurement-while, and logging-while drilling tools. In addition to their ideal non-magnetic character, these materials exhibit an excellent combination of strength, ductility and toughness properties necessary for the application. With the continued increase in operations with demanding service condit
APA, Harvard, Vancouver, ISO, and other styles
3

Mascardelli, Brock A., Simon S. Park, and Theodor Freiheit. "Substructure Coupling of Micro-End Mills." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13129.

Full text
Abstract:
Micro-end milling is an important micro-manufacturing technique which offers the ability to machine micro parts of complex geometry relatively quickly when compared with photolithographic techniques. Key to good surface quality in the micro milling operation is the minimization of tool chatter. This requires an understanding of the system dynamics; the system including both the milling tool and the milling structure. However, owing to the miniature nature of micro end mills whose diameters are as small as 50 micrometers, impact hammer testing cannot be applied directly to predict the dynamics
APA, Harvard, Vancouver, ISO, and other styles
4

Engin, Serafettin, and Yusuf Altintas. "Generalized Modeling of Milling Mechanics and Dynamics: Part I — Helical End Mills." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0691.

Full text
Abstract:
Abstract Variety of helical end mill geometry is used in industry. Helical cylindrical, helical ball, taper helical ball, bull nosed and special purpose end mills are widely used in aerospace, automotive and die machining industry. While the geometry of each cutter may be different, the mechanics and dynamics of the milling process at each cutting edge point are common. This paper presents a generalized mathematical model of most helical end mills used in industry. The end mill geometry is modeled by helical flutes wrapped around a parametric envelope. The coordinates of a cutting edge point a
APA, Harvard, Vancouver, ISO, and other styles
5

Merdol, S. Doruk, and Yusuf Altintas. "Mechanics and Dynamics of Serrated End Mills." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-39114.

Full text
Abstract:
Mechanics and dynamics of serrated milling cutters are presented in the article. The serrated flute design knots are fitted to a cubic spline, which is then projected on helical flutes. Cutting edge geometry at any point along the serrated flute is represented by its immersion angle and tangent vectors in radial, tangential and helix directions. The chip thickness removed by each cutting edge point is determined by using previously proposed exact kinematics of dynamic milling. The cutting forces are evaluated by orthogonal to oblique cutting mechanics transformation. The experimentally proven
APA, Harvard, Vancouver, ISO, and other styles
6

Kang, Yuanyuan, Yan Cao, Zhou Fang, and Guixiang Liu. "Research on the Design Process of High-speed End Mills." In 4th International Conference on Information Systems and Computing Technology. Atlantis Press, 2016. http://dx.doi.org/10.2991/isct-16.2016.21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kuo, Hsin-Yu, Kevin Meyer, Roger Lindle, Howard Weaver, and Jun Ni. "Microstructure and Material Analysis of Worn WC-Co Ball-End Mills." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72366.

Full text
Abstract:
The objective of this study is to examine the relationship between microstructure and material content at critical locations of used WC-Co ball-end mills. The performance of three similar tools was tested at identical cutting conditions. From each tool, three samples were cut from the same positions on the WC-Co ball-end mills at key locations. Scanning Electron Microscopy (SEM) was used for observation of the microstructure of material and three methods were used to determine the chemical compositions of each tool. The first method used to examine the chemical composition was Energy Dispersiv
APA, Harvard, Vancouver, ISO, and other styles
8

Ezura, Atsushi. "Effect of ultrashort pulse laser parameters on periodic structure and friction properties of cemented carbide cutting tool." In Material Forming. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-190.

Full text
Abstract:
Abstract. Cemented carbide (WC) is the most widely used material for cutting tools because of its high hardness and wear resistance. End mills made of WC are also used in a wide range of industrial fields, such as the aircraft and automobile industries, but longer life is desired for improved productivity and higher quality. Surface modification processes using lasers are attracting attention for improving the friction characteristics and wear resistance of WC. In this study, the effect of applying laser-induced periodic surface structures (LIPSS) to WC on improving its sliding properties was
APA, Harvard, Vancouver, ISO, and other styles
9

Tudu, Anirban, Shashi Bhushan Gunjan, and Sivasrinivasu Devadula. "Design Strategy for Realizing Optimized Calibration Rod for an End Mill Cutter Based on Receptance Coupling Substructure Analysis." In ASME 2024 19th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/msec2024-124488.

Full text
Abstract:
Abstract Chatter in machining caused by self-excited vibration limits the capability of high-speed spindles and results in poor surface finish and tool wear. Stability lobe diagram (SLD) is widely used to determine chatter-free machining parameters. The SLD for milling needs accurate measurement of frequency response function (FRF) at the cutting tool tip. However, asymmetry and complex geometry of end mills contribute to FRF data with low coherence. The impact testing is difficult due to the minimum area available on the cutting tool’s sharp edges for its excitation and attaching acceleromete
APA, Harvard, Vancouver, ISO, and other styles
10

Westermann, Hans-Henrik, Benjamin Thorenz, Robert Müller, and Rolf Steinhilper. "Prediction of Cutting Forces of Solid End Mills With Differential Helix Angles: A Numerical Approach." In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59122.

Full text
Abstract:
Solid end mills with multi-section cutting edges and variable helix angles are available for application. New types of solid end mills for low energy consumption have recently been developed. These so-called Low Power Cutting (LPC)-Tools are characterized by differential helix angles. Compared to solid end mills with variable helix angles, the new differential helix angles change their pitch continuously over the cutting edge length. Due to this fact the cutting conditions are not in a constant state during the revolution of the cutting tool. Existing mathematical approaches for the calculatio
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "End mills"

1

L. J. Lazarus and R. L. Hester. Evaluation of End Mill Coatings. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/885182.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Puig Gabarró, Pau, Ricardo Martínez Garza Fernández, Antonio García Zaballos, Enrique Iglesias Rodriguez, and Maribel Dalio. La última milla: conectividad digital en municipios: análisis de barreras e iniciativas públicas en América Latina y el Caribe. Inter-American Development Bank, 2022. http://dx.doi.org/10.18235/0004657.

Full text
Abstract:
El objetivo que persigue el presente documento es analizar el conjunto de barreras que explican las brechas de infraestructura de conectividad digital de última milla a nivel municipal y recopilar 100 iniciativas públicas de en América Latina y el Caribe (ALC) que las abordan. Para ello, el documento se estructura en las siguientes cuatro secciones: (i) la primera sección repasa los antecedentes que sientan las bases de la importancia de la conectividad digital de última milla en los municipios de la Región, (ii) la segunda sección identifica y describe los factores clave que explican la brech
APA, Harvard, Vancouver, ISO, and other styles
3

Robinson, James P. Provisional Geologic Map of the Gold Hill Quadrangle, Tooele County, Utah (GIS Reproduction of UGS Map 140 [1993]). Utah Geological Survey, 2023. http://dx.doi.org/10.34191/m-301dr.

Full text
Abstract:
The Gold Hill quadrangle is on the northern end of the Deep Creek Range, approximately 65 kilometers (40 miles) south southeast of Wendover, Utah and 20 kilometers (12 miles) east of the Nevada border. The Deep Creek Range is a north-trending fault-bounded range exemplifying the ranges in the northern Basin and Range physiographic province. Dutch Mountain, approximately 7.2 kilometers (4.5 miles) north-northwest of Gold Hill town, is the highest point in the Gold Hill quadrangle at 2,372 meterc (7,794 feet). Lowlands, south of Dutch Mountain and west of Gold Hill town, range in elevation from
APA, Harvard, Vancouver, ISO, and other styles
4

Puig Gabarró, Pau, Raúl Katz, Hernán Galperin, et al. Abierta configuration options Medición del impacto socioeconómico del desarrollo de infraestructura de última milla en Brasil. Inter-American Development Bank, 2022. http://dx.doi.org/10.18235/0004199.

Full text
Abstract:
El presente documento busca adentrarse en la medición del impacto económico y social del desarrollo de infraestructura de telecomunicaciones de última milla en Brasil, diferenciando el análisis por contexto geográfico (municipios de baja población o muy poblados), género y años de educación formal, detallando los efectos y los canales de transmisión que vinculan el despliegue de banda ancha con los beneficios socioeconómicos. Acceder a esta información puede ayudar al gobierno de Brasil a tomar decisiones de políticas públicas sobre la conveniencia de extender el despliegue de última milla. Lo
APA, Harvard, Vancouver, ISO, and other styles
5

Puig Gabarró, Pau, Raúl Katz, Hernán Galperin, et al. Abierta configuration options Medición del impacto socioeconómico del desarrollo de infraestructura de última milla en Brasil. Inter-American Development Bank, 2022. http://dx.doi.org/10.18235/0004199.

Full text
Abstract:
El presente documento busca adentrarse en la medición del impacto económico y social del desarrollo de infraestructura de telecomunicaciones de última milla en Brasil, diferenciando el análisis por contexto geográfico (municipios de baja población o muy poblados), género y años de educación formal, detallando los efectos y los canales de transmisión que vinculan el despliegue de banda ancha con los beneficios socioeconómicos. Acceder a esta información puede ayudar al gobierno de Brasil a tomar decisiones de políticas públicas sobre la conveniencia de extender el despliegue de última milla. Lo
APA, Harvard, Vancouver, ISO, and other styles
6

Contreras Pedraza, Carlos Alberto, Maria Esperanza Mora Niviayo, and Diego Hernando Flórez Martínez. Tendencias en investigación internacional y nacional en aguacate hass (Persea americana Mill. cv. Hass). Corporación Colombiana de Investigación Agropecuaria - AGROSAVIA, 2021. http://dx.doi.org/10.21930/agrosavia.vigilanciacientifica.2021.1.

Full text
Abstract:
El aguacate Hass es uno de los cultivos más importantes a nivel global, con un crecimiento significativo en la producción y exportación. Este estudio de vigilancia científica se enfoca en las tendencias actuales de investigación sobre el aguacate Hass, tanto a nivel internacional como nacional. A través del análisis de publicaciones científicas y desarrollos tecnológicos, se mapean las áreas clave de innovación, como la mejora genética, la sostenibilidad y la eficiencia productiva, que están moldeando el futuro de esta industria
APA, Harvard, Vancouver, ISO, and other styles
7

Mosquera Castro, Tania, Roberto Bartolomé Abraira, Mario César Vila, Esperanza Martín Hernández, and Francisco Alonso Toucido. Los Tejares. Institut Català d’Arqueologia Clàssica, 2022. http://dx.doi.org/10.51417/figlinae_042.

Full text
Abstract:
Ficha del yacimiento Los Tejares ubicado a Milles de la Polvorosa (Zamora) incluida en el proyecto "Figlinae Hispanae (FIGHISP). Catálogo en red de las alfarerías hispanorromanas y estudio de la comercialización de sus productos".
APA, Harvard, Vancouver, ISO, and other styles
8

Puig Gabarró, Pau, Raúl Katz, Hernán Galperin, et al. Medición del impacto socioeconómico del desarrollo de infraestructura de última milla en El Salvador. Inter-American Development Bank, 2022. http://dx.doi.org/10.18235/0004197.

Full text
Abstract:
Este documento busca adentrarse en la medición del impacto económico y social del desarrollo de infraestructura de última milla en El Salvador, diferenciando el análisis por contexto geográfico (urbano y rural), género y años de educación formal, detallando los efectos y los canales de transmisión que vinculan el despliegue de banda ancha con los beneficios socioeconómicos. Acceder a esta información puede ayudar al gobierno de El Salvador a tomar decisiones de políticas públicas sobre la conveniencia de extender el despliegue de última milla. Los resultados demuestran la importancia de acompa
APA, Harvard, Vancouver, ISO, and other styles
9

Puig Gabarró, Pau, Raúl Katz, Hernán Galperin, et al. Medición del impacto socioeconómico del desarrollo de infraestructura de última milla en Ecuador. Inter-American Development Bank, 2022. http://dx.doi.org/10.18235/0004198.

Full text
Abstract:
El presente documento busca adentrarse en la medición del impacto económico y social del despliegue de banda ancha fija en Ecuador. En este sentido, el trabajo se centra en la exploración de dicho impacto sobre los ingresos, el empleo y la participación laboral, atendiendo la heterogeneidad que muestra según el género, el nivel educativo, los grupos etarios y las áreas geográficas. Los resultados permiten comprobar un importante retorno socioeconómico de la iniciativa Ecuador Digital 2.0 y, en particular, del Plan Nacional de Desarrollo de Banda Ancha. Dicho plan, iniciado en 2012, combina acc
APA, Harvard, Vancouver, ISO, and other styles
10

Puig Gabarró, Pau, Raúl Katz, Hernán Galperin, et al. Medición del impacto socioeconómico del desarrollo de infraestructura de última milla en Jamaica. Inter-American Development Bank, 2022. http://dx.doi.org/10.18235/0004196.

Full text
Abstract:
El presente documento busca adentrarse en la medición del impacto económico y social del despliegue de infraestructura digital de última milla en Jamaica (por ejemplo, en el nivel de gasto de la población y los indicadores laborales). Acceder a esta información puede ayudar al gobierno de Jamaica a tomar decisiones de políticas públicas sobre la conveniencia de extender el despliegue de banda ancha y generar incentivos para la adopción de la conectividad en los hogares. Los resultados demuestran la importancia de acompañar el despliegue de banda ancha con políticas públicas que promuevan un be
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'End mills' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography