Relevant bibliographies by topics / Epoxy compositions

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Epoxy compositions'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Epoxy compositions.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Epoxy compositions"

1

Jang, Jeong Beom, Tae Hee Kim, Taeyoon Kim, et al. "Modified Epoxy Resin Synthesis from Phosphorus—Containing Polyol and Physical Changes Studies in the Synthesized Products." Polymers 11, no. 12 (2019): 2116. http://dx.doi.org/10.3390/polym11122116.

Full text
Abstract:
Epoxy resins are commonly used to manufacture the molding compounds, reinforced plastics, coatings, or adhesives required in various industries. However, the demand for new epoxy resins has increased to satisfy diverse industrial requirements such as enhanced mechanical properties, thermal stability, or electrical properties. Therefore, in this study, we synthesized new epoxy resin (PPME) by modifying phosphorous-containing polyol. The prepared resin was analyzed and added to epoxy compositions in various quantities. The compositions were cured at high temperatures to obtain plastics to furthe
APA, Harvard, Vancouver, ISO, and other styles
2

Tsvetkov, Yuriy N., Yaroslav O. Fiaktistov, and Roman N. Larin. "Effectiveness of application of epoxy compound without powder filler to re-pair ship propellers damaged under cavitation." Russian Journal of Water Transport, no. 81 (December 19, 2024): 56–69. https://doi.org/10.37890/jwt.vi81.532.

Full text
Abstract:
Epoxy compositions are wide-spread in repairing the ship propellers blades damaged under cavitation attack. Most of the epoxy repair compositions contain the metal powders as filler. But the manufacturers of such compositions do not substantiate the expediency of using the metal powder in epoxy compositions for repairing the blades with cavitation wear spots. And the issue of the influence of metal powder filler on the cavitation wear resistance of the epoxy composition remains open. Experiments on ultrasonic magnetostrictive rig allowed drawing the conclusion, that the epoxy compositions cont
APA, Harvard, Vancouver, ISO, and other styles
3

Buketov, Andriy, Serhiy Smetankin, Pavlo Maruschak, et al. "NEW BLACK-FILLED EPOXY COATINGS FOR REPAIRING SURFACE OF EQUIPMENT OF MARINE SHIPS." Transport 35, no. 6 (2021): 679–90. http://dx.doi.org/10.3846/transport.2020.14286.

Full text
Abstract:
The methods for ensuring long-term and safe operation of marine equipment due to comprehensive repair technologies that use epoxy oligomers and new compositions based on them are developed. The influence of temperature and UltraSonic Treatment (UST) on the rheological properties of the pure epoxy matrix and compositions based on it is explored. The compositions have different content of nanodispersed soot carbon black of brand PowCarbon 2419G (particle size of 24 ± 2 nm). It is established that when nanoparticle soot (q = 0.10…15.00 pts wt) is introduced into the composition of the epoxy matri
APA, Harvard, Vancouver, ISO, and other styles
4

Czub, Piotr, Wojciech Mazela, and Jan Pielichowski. "Epoxy-carbazole compositions." Synthetic Metals 158, no. 21-24 (2008): 826–30. http://dx.doi.org/10.1016/j.synthmet.2008.05.012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Humenetskyi, T. V., L. M. Bilyi, N. V. Chopyk та A. I. Boshchuk. "Аnti-corrosion coatings based on modified epoxy compositions". Chemistry, Technology and Application of Substances 6, № 1 (2023): 144–47. http://dx.doi.org/10.23939/ctas2023.01.144.

Full text
Abstract:
The influence of surface-modified titanium dioxide on the electrochemical features of epoxy compositions was researched. The raise of epoxy primer protective properties by the presence of surface-modified fillers in its composition was determined. It is shown that the mechanism of the modified filler protective effect in epoxy coating applied on the steel is similar to the effect of solid zinc phosphate which effectiveness corresponds to the level of the known inhibitory pigment.
APA, Harvard, Vancouver, ISO, and other styles
6

Ahmadov, E. N. "DEVELOPMENT OF BIOCIDAL COMPOSITIONS ON THE BASIS OF PVC STABILIZED WITH EPOXY-CONTAINING COMPOUNDS." New Materials, Compounds and Applications 8, no. 2 (2024): 171–77. http://dx.doi.org/10.62476/nmca82171.

Full text
Abstract:
The glycidyl ethers of phenyl(benzyl)cyclopropyl carbinol have been synthesized and the compositions on the basis of PVC with use of them as biocidal stabilizers have been developed. The influence of the synthesized epoxy compounds on the critical dissolution temperature of emulsion PVC in the binary mixture consisting of dioctylphthalate (DOPh) and epoxy compounds has been studied and an extreme dependence of the critical dissolution temperature on the quantity of the introduced complex stabilizers has been revealed. Some physical-mechanical properties of the films made from compositions have
APA, Harvard, Vancouver, ISO, and other styles
7

Stroganov, I. V., R. Z. Khairullin, and V. F. Stroganov. "Fire-Resistant Epoxy Anhydride and Epoxy Amine Compositions." Polymer Science, Series D 18, no. 1 (2025): 146–49. https://doi.org/10.1134/s1995421224701934.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Miturska, Izabela, Anna Rudawska, Miroslav Müller, and Monika Hromasová. "The Influence of Mixing Methods of Epoxy Composition Ingredients on Selected Mechanical Properties of Modified Epoxy Construction Materials." Materials 14, no. 2 (2021): 411. http://dx.doi.org/10.3390/ma14020411.

Full text
Abstract:
The proper process of preparing an adhesive composition has a significant impact on the degree of dispersion of the composition ingredients in the matrix, as well as on the degree of aeration of the resulting composition, which in turn directly affects the strength and functional properties of the obtained adhesive compositions. The paper presents the results of tensile strength tests and SEM microphotographs of the adhesive composition of Epidian 57 epoxy resin with Z-1 curing agent, which was modified using three fillers NanoBent ZR2 montmorillonite, CaCO3 calcium carbonate and CWZ-22 active
APA, Harvard, Vancouver, ISO, and other styles
9

Fariz Amirli, Rasmiyya Mammadova, Fariz Amirli, Rasmiyya Mammadova, and Aman Eyvazov Aman Eyvazov. "PREPARATION OF ADHESIVE COMPOSITION BASED ON ALLYL PROPIONATE-STYRENE-MALIC ANHYDRIDE TERTIARY COPOLYMER." PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions 148, no. 02-02 (2024): 10–15. https://doi.org/10.36962/pahtei14802-022024-10.

Full text
Abstract:
Adhesive compositions based on allyl propionate-styrene-maleic anhydride ternary copolymer and ED-20 epoxy resin were prepared and some physical and physico-chemical properties of these ad-hesive compositions were determined. Adhesive compositions were prepared in different ratios of allyl propionate-styrene-maleic anhy-dride ternary copolymer and ED-20 epoxy resin (10,15, 20, 25, 30 m.f. copolymer for 100 m.f. ED-20 epoxy resin). The property of bonding duralumin plates of the glue obtained by curing under different condi-tions was studied. It was determined that the sliding fracture resistan
APA, Harvard, Vancouver, ISO, and other styles
10

Keibal, N. A., V. F. Kablov, V. V. Pudovkin, and V. S. Sakhnova. "INVESTIGATION OF PROPERTIES OF EPOXY COMPOSITES CONTAINING SHUNGITE." IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY, no. 12(247) (December 24, 2020): 102–6. http://dx.doi.org/10.35211/1990-5297-2020-12-247-102-106.

Full text
Abstract:
The paper presents the results of a study of epoxy compositions containing MK-2 shungite as a filler. It is shown that shungite increases the resistance to thermal-oxidative degradation, as well as the heat-protective properties of epoxy compositions. In addition, epoxy compositions containing shungite are characterized by increased adhesion properties to the metal.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Epoxy compositions"

1

Wainwright, Robin. "Mechanical properties of epoxy/alumina trihydrate-filled compositions." Thesis, Kingston University, 1991. http://eprints.kingston.ac.uk/20557/.

Full text
Abstract:
The mechanical properties of alumina trihydrate (ATH)-filled epoxy resin at loadings of up to 100 parts by weight ATH per hundred of resin (epoxy and hardener) (pphr) have been investigated. A low peak exotherm, increased Young's modulus and increased critical strain energy release rate (G[sub]IC) and critical stress intensity factor (K[sub]IC) can be achieved by incorporating a dispersion of ATH into an epoxy resin. However, the high filler loadings required for effective fire resistance reduce tensile strength and elongation. Tensile modulus increases with filler loading in line with previou
APA, Harvard, Vancouver, ISO, and other styles
2

Мариняка, Катерина Анатоліївна. "Розробка технології та визначення властивостей наповнених епоксидних композитів функціонального призначення". Магістерська робота, Київський національний університет технологій та дизайну, 2021. https://er.knutd.edu.ua/handle/123456789/19309.

Full text
Abstract:
Дипломну магістерську роботу присвячено розробці технології та визначенню властивостей наповнених епоксидних композитів функціонального призначення. В результаті проведених теоретичних та експериментальних досліджень рекомендовані склад та параметри технології та визначення властивостей наповнених епоксидних композитів функціонального призначення. Досліджено фізико-механічні властивості композицій на основі епоксидної смоли ЕД-20 та затверджувача триетилентетраміну та проведено аналіз впливу вмісту наповнювача на їх основні властивості. Обґрунтовано та обрано обладнання для виготовлення та дос
APA, Harvard, Vancouver, ISO, and other styles
3

Бардадим, Ю. В. "Фізична модифікація епоксидних композицій". Thesis, Сумський державний університет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/53315.

Full text
Abstract:
Висока хімічна стійкість до впливу агресивних середовищ, гарні діелектричні властивості, підвищена зносостійкість зумовлюють широке застосування епоксидних композитів. Вони ефективно використовують для захисту технологічного обладнання від корозії та з метою поліпшення фізико-механічних і теплофізичних властивостей деталей машин у багатьох галузях промисловості.
APA, Harvard, Vancouver, ISO, and other styles
4

Tidrick, Shari Lynne. "Investigations of the silane/epoxy matrix interphase for silane coupling agent blends of varying composition." Case Western Reserve University School of Graduate Studies / OhioLINK, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=case1055857671.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cracknell, John Gordon. "Epoxy resin/polyethersulphone semi-interpenetrating polymer networks : the effect of curing and composition on structure and properties." Thesis, University of Ulster, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334417.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Biao, Qi. "Sanding, Grit Blasting and Plasma Etching: Effect on Surface Composition and Surface Energy of Graphite/Epoxy Composites." University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1244125510.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Qi, Biao. "Sanding, grit blasting and plasma etching effect on surface composition and surface energy of graphite/epoxy composites /." Cincinnati, Ohio : University of Cincinnati, 2009. http://rave.ohiolink.edu/etdc/view.cgi?acc_num=ucin1244125510.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

ROBY, BENJAMIN JAMES. "EFFECT OF GRIT-BLASTING AND PLASMA ETCHING ON THE SURFACE COMPOSITION AND SURFACE ENERGY OF GRAPHITE/EPOXY COMPOSITES." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1131650624.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nieves, Ian Ivan. "Effects of Electron Irradiation and Percent Composition on the Glass Transition Temperature and Damping of Boron-Epoxy Composites." W&M ScholarWorks, 1996. https://scholarworks.wm.edu/etd/1539626045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bonner, J. K. "Kirk", and Silveira Carl de. "Thermal Cycling Fatigue Investigation of Surface Mounted Components with Eutectic Tin-Lead Solder Joints." International Foundation for Telemetering, 1996. http://hdl.handle.net/10150/611418.

Full text
Abstract:
International Telemetering Conference Proceedings / October 28-31, 1996 / Town and Country Hotel and Convention Center, San Diego, California<br>Eutectic (63% tin-37% lead) or near-eutectic (40% tin-60% lead) tin-lead solder is widely used for creating electrical interconnections between the printed wiring board (PWB) and the components mounted on the board surface. For components mounted directly on the PWB mounting pads, that is, surface mounted components, the tin-lead solder also constitutes the mechanical interconnection. Eutectic solder has a melting point of 183°C (361°F). It is importa
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Epoxy compositions"

1

Hoeven, W. van der. DSC measurements on experimental TGDDM/DDS resin systems: The influence of variations in resin composition and catalyst content. National Aerospace Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cracknell, J. G. Epoxy resin / polyethersulphone semi-interpenetrating polymer networks: The effect of curing and composition on structure and properties. The Author], 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Epoxy compositions"

1

Piotrowski, Tomasz, Piotr Prochoń, and Magdalena Wojtkowska. "Neutron Radiation Shielding of C-PC and Geopolymers." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_63.

Full text
Abstract:
AbstractThe aim of the paper is to evaluate neutron shielding efficiency of ordinary concrete, heavy-weight concrete and geopolymer concrete modified with epoxy additive. Evaluation was based on neutron shielding efficiency calculations. Since the commonly used fast neutron effective removal cross-section calculation does not take into account thermal neutron absorption reactions, a method adopted from the fast neutron effective removal cross-section calculation based on the macroscopic cross-section calculation for compositions is therefore applied. The results confirmed that an efficient neu
APA, Harvard, Vancouver, ISO, and other styles
2

Raut, L. B., and A. R. Katu. "Experimental Analysis of Different Compositions of Carbon Fiber/Epoxy Composite and Its Application in Leaf Spring." In Techno-Societal 2016. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-53556-2_72.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Burkhanova, R. A., N. Yu Evstafyeva, T. K. Akchurin, and I. V. Stefanenko. "Filling of Epoxy Polymers as a Factor of Obtaining a Multi-component Composition with Improved Strength Properties." In Proceedings of the 5th International Conference on Construction, Architecture and Technosphere Safety. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91145-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Vergnaud, J. W., and J. Bouzon. "Variation of Enthalpy and Kinetic Parameters of the Cure of Epoxy Resin with the Composition of the Binary System." In Cure of Thermosetting Resins. Springer London, 1992. http://dx.doi.org/10.1007/978-1-4471-1915-9_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kuclourya, Tanay, Mohit Kumar Jain, Shubham Mudliar, Narendiranath Babu Thamba, and S. Venkatesan. "Impact Testing of Graphene, Epoxy and Carbon Fibre Reinforced Coir Composites and Automatic Prediction of Graphene Composition Using ANN." In Repair of Advanced Composites for Aerospace Applications. CRC Press, 2022. http://dx.doi.org/10.1201/9781003200994-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"EPOXY-ROLIVSAN COMPOSITIONS - THERMALLY STABLE BINDERS FOR REINFORCED PLASTICS." In Crosslinked Epoxies. De Gruyter, 1987. http://dx.doi.org/10.1515/9783110867381-045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Belis Jan, Van Hulle Arno, Callewaert Dieter, Dispersyn Jonas, and Out Bas. "Experimental Investigation of Unconventional Canopy Prototypes, Suspended by Adhesive Bonds." In Challenging Glass 3. IOS Press, 2012. https://doi.org/10.3233/978-1-61499-061-1-177.

Full text
Abstract:
In this contribution the performance of an adhesively bonded glass to metal connection with a carefully selected epoxy adhesive is investigated experimentally. Deliberately pushing the limits of conventional safety concepts for the sake of the experiment, laminated glass canopies were suspended on stainless steel local point-fixings, adhesively bonded to the upper glass sheet only. Subsequently, the suspended system was subjected to a ball-drop test, a uniform load and a hammer impact. Different glass types and canopy arrangements have been tested in this way. Depending on the design parameter
APA, Harvard, Vancouver, ISO, and other styles
8

Bukhari, Syed Umair Niaz, and Ahmad Raza Khan Rana. "Case Study Based on Failure Analysis and Re-application of Surface Coating." In Case Studies in Corrosion Failures. AMPP, Association for Materials Protection and Performance15835 Park Ten Place, Houston, TX 77084, 2025. https://doi.org/10.5006/37692-ch20.

Full text
Abstract:
Abstract Surface coatings are a cost-effective method for protecting metals surface and is well known for versatility, ease of maintenance, and various compositions specific to service involved. In this case study, a detailed investigation was conducted to discover the reason behind the failure of the external coating system (aliphatic polyurethane) on a riveted fire water tank for a turnkey project located in the Arabian Gulf region. Visual inspections of longitudinal seams alongside the failed coatings revealed rust stains which came from the seepage of the service. The under fill/primer lay
APA, Harvard, Vancouver, ISO, and other styles
9

"- A RESEARCH NOTE ON NEW FILM-FORMING COMPOSITIONS ON THE BASIS OF EPOXY RESIN AND INDUSTRIALLY PRODUCED ISOCYANATE." In Functional Materials. Apple Academic Press, 2015. http://dx.doi.org/10.1201/b18183-20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Chunfu. "Snap Thermal Cure Epoxy Technology." In Instant Bonding Epoxy Technology. BENTHAM SCIENCE PUBLISHERS, 2025. https://doi.org/10.2174/9789815313444125010006.

Full text
Abstract:
Snap thermal cure epoxy adhesives are typically one-component epoxy composition, comprising epoxy resin, a new type latent curing agent, and an accelerator with modifiers and additives. Snap thermal cure adhesives can cure very fast at certain elevated temperature conditions and have been very successfully used in semiconductor packaging and electronics module assembly applications.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Epoxy compositions"

1

Advincula, Rigoberto C. "Superhydrophobic and Nanostructured HPHT Stable Polybenzoxazine Nanocomposite Coatings for Oil and Gas." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13524.

Full text
Abstract:
Abstract Coatings have the function of resistance to environmental attack, i.e. barrier protection, abrasion and chemical resistance, yet a number of them have not been optimized against wetting when it comes to dual or enhanced properties and durability at higher temperatures and pressures (HPHT). Polybenzoxazine (PBZ) chemistry and polymerization have enjoyed tremendous growth due to its versatility in chemistry and a number of advantages in properties for high-temperature applications compared to epoxy, polyurethane (PU), phenolformaldehyde (PF) resins. This is due to a wide variety of mono
APA, Harvard, Vancouver, ISO, and other styles
2

O’Donoghue, Mike, Vijay Datta, and Carl Reed. "The Performance Effect of Coating Rusty Steel with an Epoxy-Phenalkamine Coating." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11067.

Full text
Abstract:
Abstract Popular wisdom holds that abrasive blasted steel cleaned to a near-white metal finish (NACE 2/SSPC- SP10) or better provides the optimum performance for coatings applied to the substrate. This is certainly true for inorganic silicate coatings such as zinc silicates where the silicic acid from the binder will covalently bond with metallic iron. For organic coatings, however, in particular epoxy-amine coatings, the mechanism of bonding with metallic iron, other than van der Waals forces, is not known, if it exists at all. On the other hand, the mechanism of epoxy-amine coatings binding
APA, Harvard, Vancouver, ISO, and other styles
3

Kelley, Don, and Michael Jaeger. "Performance of Epoxy Vinyl Ester Resins in Dilute Solvents, Synergistic Effects with HCl." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07540.

Full text
Abstract:
Abstract The results of exposing Fiber Reinforced Plastics (FRP) coupons made from three different types of corrosion resistant thermosetting resins in several dilute water soluble/miscible organic compounds for up to one year are presented. In addition, the results of a study with four resins in contact with a two-phase aqueous/organic system are discussed. The purpose of these studies was to determine the limits of acceptable performance of FRP based on a range of epoxy vinyl ester resins in solvent containing environments. The first study showed that dilute organic compounds are in general
APA, Harvard, Vancouver, ISO, and other styles
4

Bukhari, Syed Umair Niaz, and Ahmad Raza Khan Rana. "Case Study Based on Failure Analysis and Re-application of Surface Coating." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-18109.

Full text
Abstract:
Abstract Surface coatings are a cost-effective method for protecting metals surface and is well known for versatility, ease of maintenance, and various compositions specific to service involved. In this case study, a detailed investigation was conducted to discover the reason behind the failure of the external coating system (aliphatic polyurethane) on a riveted fire water tank for a turnkey project located in the Arabian Gulf region. Visual inspections of longitudinal seams alongside the failed coatings revealed rust stains which came from the seepage of the service. The under fill / primer l
APA, Harvard, Vancouver, ISO, and other styles
5

Knudsen, Ole Øystein, and Jan Ivar Skar. "Cathodic Disbonding of Epoxy Coatings – Effect of Test Parameters." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08005.

Full text
Abstract:
Abstract A large number of standardized test methods for cathodic disbonding are available. Parameters like voltage, electrolyte composition, temperature, sample configuration etc vary over a wide range between the various tests. A round robin test recently organized by NACE showed that one can expect significant variation in result between test labs, in spite of identically coated samples and test procedures. This paper presents a review of published literature on the effect of various parameters on cathodic disbonding, and results from a study on the effect of oxygen concentration, dry film
APA, Harvard, Vancouver, ISO, and other styles
6

Gaillard, G., G. Connelly, and J. Llorens. "3 Layer Epoxy-Polyolefin Pipe Coatings." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88309.

Full text
Abstract:
Abstract 3 Layer polyolefin pipe coatings combine in one system the advantages of two well established types of anticorrosion coatings: - epoxies and extruded polyolefins. The combination of epoxy and extruded polyolefin coatings provides significant improvements in performance with respect to traditional 2 layer systems, particularly in the areas of cathodic disbondment resistance and adhesion. As a result, 3 layer systems have become well established in many parts of the world over the last two years and are being increasingly specified for both onshore and offshore oil and gas pipelines. Th
APA, Harvard, Vancouver, ISO, and other styles
7

Kurnik, W. J. "The Effect of Water as a Solvent on the Performance of Epoxy/Amine Coatings." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85004.

Full text
Abstract:
Abstract Two component solvent based, epoxy/amine coatings have been, and continue to be, used extensively in industrial maintenance, architectural, marine and new construction areas over a variety of substrates. These coatings are used due to their inherent qualities of adhesion, corrosion resistance, solvent and chemical resistance required in these applications. The development of water based epoxy coatings, although more recent, was a logical extension of water borne developments in other resins such as alkyds and acrylics in the coatings industry. Despite the obvious benefit of using wate
APA, Harvard, Vancouver, ISO, and other styles
8

Riabchenko, Maksym, Anna Cherkashina, Aleksandr Bliznyuk, Volodimir Lebedev, Natalia Kryvobok, and Oleksii Shestopalov. "Computer Modeling of Optimal Chemical Composition of Polymer Epoxy Composites for Electromagnetic Radiation Absorbing." In 2024 IEEE 5th KhPI Week on Advanced Technology (KhPIWeek). IEEE, 2024. https://doi.org/10.1109/khpiweek61434.2024.10878048.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hansen, Douglas C., David Borth, and Farrah Cole. "Characterization of the Surface Chemistry at Corroded and Non-Corroded Sites on Aluminum Alloy 7075-T6 Samples Exposed at Coastal Locations." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17642.

Full text
Abstract:
Abstract Replicate samples of bare aluminum alloy AA7075-T6 were exposed at three coastal atmospheric test sites: Kennedy Space Center (KSC) FL, US Naval Research Laboratory in Key West, FL (NRL-KW), and Daytona Beach, FL. The samples were cross sections of rod stock mounted in standard two-part epoxy metallurgical mounts and wet polished with isopropanol to 600 grit finish. The samples were installed on atmospheric exposure racks and retrieved at intervals of 3, 6, 9, and 12 months. Elemental composition of baseline (non-exposed) and exposed samples were measured using a Zeiss EVO-50XP Enviro
APA, Harvard, Vancouver, ISO, and other styles
10

Tsuri, S., K. Takao, and K. Mochizuki. "Effect of Primer Composition on Cathodic Disbonding Resistance and Adhesion Durability of Three Layer Polyethylene Coated Steel Pipe." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98497.

Full text
Abstract:
Abstract The cathodic disbonding resistance and adhesion durability of three layer polyethylene coated steel pipe were studied from the viewpoint of water permeability and the water uptake of dicyandiamide-imidazole cured epoxy primer. The reaction between the epoxy resin and dicyandiamide generates hydroxyl groups. Therefore, as the content of dicyandiamide increased, the water uptake of the primer increased and the water diffusion rate of the primer decreased because of the strong interaction between hydroxyl reaction product and water molecules. Excellent cathodic disbonding resistance and
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Epoxy compositions"

1

Sabatini, Jesse J., James M. Raab, and Ronald K. Hann. Mitigation of Single-Point-of-Failure: Development of M127A1 White Star Illuminant Compositions Containing an Epoxy Binder System. Defense Technical Information Center, 2012. http://dx.doi.org/10.21236/ada575557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

ตัณฑะพานิชกุล, วิวัฒน์. การศึกษาผลกระทบของปริมาณน้ำในเซลลูโลสไนเตรตต่อคุณสมบัติของน้ำยาทาเล็บ ที่มีดินเหนียวเป็นสารปรับสภาพการไหล : รายงานวิจัยแบบสมบูรณ์. จุฬาลงกรณ์มหาวิทยาลัย, 2004. https://doi.org/10.58837/chula.res.2004.55.

Full text
Abstract:
Cellulose nitrate (CN) is a semi-synthetic polymer rendering outstanding film properties such as good transparency, and water resistance, thus finds its major utilization in coating industry. Raw CN has water and isopropyl alcohol by-product at maximum content of approximately 3 and 30 wt%, respectively. The tolerance water level in the CN powder for a potential application as nail polish is investigated in order to produce good film-forming properties. The effect of adding layered silicate clay particles as thixotropic agent in the nail enamel is also examined. The water content was varied at
APA, Harvard, Vancouver, ISO, and other styles
3

Montgomery, Stephen Tedford. Effects of composition on the mechanical response of alumina-filled epoxy. Office of Scientific and Technical Information (OSTI), 2009. http://dx.doi.org/10.2172/974404.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Montgomery, Stephen Tedford, Sung K. Ahn, and Moo Yul Lee. Statistical analysis of compositional factors affecting the compressive strength of alumina-loaded epoxy (ALOX). Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/877740.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Epoxy compositions' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography