Log in

Relevant bibliographies by topics / Filtered vacuum arc deposition / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Filtered vacuum arc deposition.

Dissertations / Theses on the topic 'Filtered vacuum arc deposition'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 37 dissertations / theses for your research on the topic 'Filtered vacuum arc deposition.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Veerasamy, Vijayen S. "Tetrahedral amorphous carbon : deposition, characterisation and electronic properties." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.337824.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Minault, Christophe S. "Filtered vacuum arc deposition of diamond like carbon films on sharp edged samples." Thesis, University of Reading, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.298488.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Elzwawi, Salim Ahmed Ali. "Cathodic Arc Zinc Oxide for Active Electronic Devices." Thesis, University of Canterbury. Electrical and Computer Engineering, 2015. http://hdl.handle.net/10092/10852.

Full text

Abstract:

The filtered cathodic vacuum arc (FCVA) technique is a well established deposition method for wear resistant mechanical coatings. More recently, this method has attracted attention for growing ZnO based transparent conducting films. However, the potential of FCVA deposition to prepare ZnO layers for electronic devices is largely unexplored. This thesis addresses the use of FCVA deposition for the fabrication of active ZnO based electronic devices. The structural, electrical and optical characteristics of unintentionally doped ZnO films grown on different sapphire substrates were systematically

APA, Harvard, Vancouver, ISO, and other styles

4

Vasyliev, V. V., A. A. Luchaninov, E. N. Reshetnyak, and V. E. Strelnitskij. "Comparative Characteristics of Stress and Structure of TiN and Ti0.5-xAl0.5YxN Coatings Prepared by Filtered Vacuum-Arc PIIID Method." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34913.

Full text

Abstract:

A comparative study of the structure and stress state of Ti0.5-xAl0.5YxN and TiN coatings deposited under identical conditions from the filtered vacuum-arc plasma under high voltage pulsed bias potential on the substrate was carried out. It was found that for Ti0.5Al0.5N coatings the dependence of the residual stress on the amplitude of the pulsed voltage potential is non-monotonic with a minimum when the amplitude is of 1 kV. As for TiN films, a monotonic decrease in the level of residual stresses takes place when the amplitude of the potential is increased in the range 0-2.5 kV. Non-mon

APA, Harvard, Vancouver, ISO, and other styles

5

Kuhakan, J., M. Medhisuwakul, and L. D. Yu. "Filtered Cathodic Vacuum Arc Deposition of Porous and Nanostructured Carbon and Hybrid C-Mo Thin Films for Fuel Cell Membranes." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34867.

Full text

Abstract:

In our proton exchange membrane (PEM) fuel cells, the electrolyte is a catalyst platinum (Pt) coated nafion membrane. In order to increase the electrochemically active catalyst area to enhance the cell performance but without sacrificing the electrical conductivity of the membrane, carbon thin films were deposited onto the membrane by using the filtered cathodic vacuum arc deposition (FCVAD) technique. With varying the deposition conditions, it was possible to form porous carbon films and nanoisland and nanorod structure surface which increased the catalyst area when a higher He working g

APA, Harvard, Vancouver, ISO, and other styles

6

Akkaya, S. S., V. V. Vasyliev, K. Kazmanl, et al. "Mechanical and Tribological Properties of TiN Coatings Produced by PIII&D Technique." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35187.

Full text

Abstract:

The structure, mechanical and tribological properties TiN coatings рroduced with PIII&D by using rectilinear filtered vacuum arc plasma system are present. The results of scratch testing and wear reciprocating testing clearly revealed the positive effect of pulse bias (0.5÷2.5 kV) application on tribological behavior of the TiN coatings in comparison the coatings deposited with DC bias (150 V). Application of pulsed bias potential leads to a significant reduction in the friction coefficient and increasing of coatings wear resistance due to a change in their structure. The orientation of c

APA, Harvard, Vancouver, ISO, and other styles

7

Mustapha, Nazir Mohamad. "Reactive filtered arc evaporation." Thesis, Loughborough University, 1993. https://dspace.lboro.ac.uk/2134/26797.

Full text

Abstract:

Conventional physical vapour deposition (PVD) techniques usually result in films of lower quality than the corresponding bulk material. A major problem with PVD films is the presence of columns and voids throughout the thickness of the film. The films may have a low packing density, low micro-hardness and in many cases poor adhesion to the substrate. Many of these problems are a direct consequence of the low energy of the depositing atoms arriving at the substrate during film growth. The resulting film porosity gives rise to a reduction in mechanical strength, and in the case of dielectric opt

APA, Harvard, Vancouver, ISO, and other styles

8

Belous, V. A., S. A. Firstov, V. F. Gorban, et al. "Properties of Coatings Deposited from Filtered Vacuum Arc Plasma with HEA Cathode." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35323.

Full text

Abstract:

Ti-V-Zr-Nb-Hf metallic and nitride films were deposited by filtered vacuum arc plasma from a single equiatomic HEA cathode. The composition, microstructure, mechanical properties, thermal stability and corrosion properties were investigated. The deposited metallic film has a two-phase structure with bcc and hcp-lattice. The nitride films were found to have only an fcc structure. All coatings have nano-grained structures, with grain sizes 5 nm for metallic and 36 nm for nitride. The nitride coatings have a compressive stress of around – 12,5 GPa, high hardness ~ 40 GPa and elastic modulus

APA, Harvard, Vancouver, ISO, and other styles

9

Kandah, Munther. "Droplets generation mechanisms by graphite cathodes in the vacuum arc deposition technique." Thesis, McGill University, 1993. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=69702.

Full text

Abstract:

The most severe problem for the vacuum arc deposition (VAD) technique is the formation of micron-size particles on the films. These particles degrade the films' properties. The present work studied the generation mechanisms and characteristics of the droplets that are produced in the carbon films deposited by vacuum arc technique. To achieve a better control of the generation mechanism of these droplets, the effect of the arc current, arc duration time, cathode spot temperature and distance between cathode and substrate on the size and population of the micro-droplets are studied.<br>The micro

APA, Harvard, Vancouver, ISO, and other styles

10

Beresnev, V. M., O. V. Sobol’, Олександр Дмитрович Погребняк, et al. "About Peculiarities of the Influence of the Negative Bias Potential Applied to the Substrate During the Deposition Process on the Structural State and Properties of the Multilayer system MoN-CrN." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42799.

Full text

Abstract:

Applying transition metal nitrides of Mo and Cr, which are characterized by a relatively low heat of formation, as the components of the multilayer coating, the possibilities of elemental and structural engineering of vacuum-arc coatings under the influence of the bias potential Us and the reaction gas pressure PN are revealed. It was found that at a relatively small thickness of the layers of nanometer range, which provides superhard state of the coatings, the supply of Us with the value of above the critical leads to a drop in hardness, which can be explained by mixing of layers at the inter

APA, Harvard, Vancouver, ISO, and other styles

11

Bilek, Marcela. "Plasma behaviour and properties in filtered cathodic vacuum arcs with application to the deposition of thin film silicon." Thesis, University of Cambridge, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.627143.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Baranov, O. O. "Influence of Ion Current Density on the Properties of Vacuum Arc-deposited TiN Coating." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35250.

Full text

Abstract:

Influence of ion current density on the thickness of coating deposited in the vacuum arc setup has been investigated. A planar probe was used to measure the ion current density distribution across plasma flux at a distance of 250 mm from the plasma duct exit. The current density from 20 to 50 A/m2 was obtained, depending on the probe position relative to the substrate center. TiN coatings were deposited onto cutting inserts placed at different locations on the substrate, and SEM technique was used to characterize surfaces of the coatings. It was found that low-dense coatings were formed at the

APA, Harvard, Vancouver, ISO, and other styles

13

Бондар, Олександр В`ячеславович, Александр Вячеславович Бондарь, Oleksandr Viacheslavovych Bondar, et al. "Physical and Mechanical Properties of (Ti-Zr-Nb)N Coatings, Fabricated by Vacuum-Arc Deposition." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42580.

Full text

Abstract:

The coatings based on (Ti-Zr-Nb)N were fabricated by vacuum-arc deposition of the Ti+Zr+Nb cathodes in the nitrogen atmosphere. Their physical and mechanical properties as well as tribological characteristics have been studied. The coatings are characterized by a columnar structure, their hardness reaches 44.57 GPa. The adhesion strength of coatings reaches 66.77 GPa, the friction coefficient of the «cover – Al2O3» is 1.1. It has been determined, that the hardness of the investigated coatings significantly depends on the pressure of the reaction gas. The coatings are promising as protecti

APA, Harvard, Vancouver, ISO, and other styles

14

Oates, T. W. H. "Metal plasma immersion ion implantation and deposition using polymer substrates." Thesis, The University of Sydney, 2003. http://hdl.handle.net/2123/571.

Full text

Abstract:

This thesis investigates the application of plasma immersion ion implantation (PIII) to polymers. PIII requires that a high negative potential be applied to the surface of the material while it is immersed in a plasma. This presents a problem for insulating materials such as polymers, since the implanting ions carry charge to the surface, resulting in a charge accumulation that effectively neutralises the applied potential. This causes the plasma sheath at the surface to collapse a short time after the potential is applied. Measurements of the sheath dynamics, including the collapsing shea

APA, Harvard, Vancouver, ISO, and other styles

15

Oates, T. W. H. "Metal plasma immersion ion implantation and deposition using polymer substrates." University of Sydney. Physics, 2003. http://hdl.handle.net/2123/571.

Full text

Abstract:

This thesis investigates the application of plasma immersion ion implantation (PIII) to polymers. PIII requires that a high negative potential be applied to the surface of the material while it is immersed in a plasma. This presents a problem for insulating materials such as polymers, since the implanting ions carry charge to the surface, resulting in a charge accumulation that effectively neutralises the applied potential. This causes the plasma sheath at the surface to collapse a short time after the potential is applied. Measurements of the sheath dynamics, including the collapsing shea

APA, Harvard, Vancouver, ISO, and other styles

16

Погребняк, Олександр Дмитрович, Александр Дмитриевич Погребняк, Oleksandr Dmytrovych Pohrebniak, et al. "Formation of Superhard Nanostructured Ti–Hf–N(Fe) Coatings Obtained by Vacuum Arc Deposition in HF discharge." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34929.

Full text

Abstract:

Superhard nanostructured Ti–Hf–N(Fe) coatings are prepared. The formation of local regions of (Ti, Hf)N, FeN, and Hf is detected using μ-PIXE (ion microbeam). It is revealed that the synthesized coatings have a nanohardness of 48 ± 1 GPa and are composed of nanograins with a size of 4.8–10.6 nm, which are enveloped by finer entities of other phases (Ti, Fe)N and FeN. There is a good correlation between the results derived by XRD, TEM, AFM, and SEM and microanalysis, which in turn are complemented by the analysis results obtained using an ion microbeam and PIXE. When you are citing the doc

APA, Harvard, Vancouver, ISO, and other styles

17

Oblitas, Raissa Lima de. "Avaliação da composição elementar de filmes finos de ligas metálicas depositados por Arco Catódico Filtrado em Vácuo utilizando RBS e EDS quantitativo." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/43/43134/tde-24102016-115435/.

Full text

Abstract:

Devido à relevância de filmes finos, as técnicas que são utilizadas para produzi-los e também para caracteriza-los tem se tornado importante. Neste contexto, foram analisados filmes finos de até 100 nm, de duas ligas metálicas (cromel e alumel), obtidos a partir da deposição por plasma de Arco Catódico Filtrado em Vácuo (Filtered Cathodic Vacuum Arc - FCVA). O objetivo deste projeto foi avaliar a similaridade em composição elementar entre os materiais utilizados para deposição, que operam como cátodos, e os filmes finos depositados, a partir de medições obtidas pela técnica de microanálise qua

APA, Harvard, Vancouver, ISO, and other styles

18

Duval, Hervé. "Contribution à l'utilisation de méthodes particulaires en métallurgie d'élaboration sous vide." Vandoeuvre-les-Nancy, INPL, 1998. http://www.theses.fr/1998INPL040N.

Full text

Abstract:

Les phénomènes d'interaction entre le métal liquide (ou solide) et l'atmosphère raréfiée conditionnent la composition chimique de l'alliage élaboré. L’étude et la modélisation du comportement de la phase gazeuse apparaissent donc essentielles. Le caractère fortement hors équilibre de la phase gazeuse exclut une approche hydrodynamique et impose une approche plus fine dite cinétique. Les équations d'évolution associées sont résolues à l'aide de méthodes numériques spécifiques dites particulaires. Cette approche est tout d'abord appliquée au processus d'évaporation dans les procédés de fusion so

APA, Harvard, Vancouver, ISO, and other styles

19

Багдасарян, Артем Анатолійович, Артем Анатольевич Багдасарян та Artem Anatoliiovych Bahdasarian. "Структурно-фазовое состояние и физико-механические свойства нитридных покрытий на основе Ti, Hf, Zr, V и Nb". Thesis, Изд-во СумГУ, 2015. http://essuir.sumdu.edu.ua/handle/123456789/38937.

Full text

Abstract:

Дисертація на здобуття наукового ступеня кандидата фізико-математичних наук за спеціальністю 01.04.07 – фізика твердого тіла. – Сумський державний університет, Суми, 2015. Дисертаційна робота присвячена дослідженню структурно-фазового стану і фізико-механічних властивостей наноструктурних покриттів (Ti-Hf-Zr-V-Nb)N, які отримані вакуумно-дуговим осадженням. Проведене комплексне дослідження впливу режимів осадження (тиск робочого газу і потенціал зсуву підкладки) на морфологію, елементний і фазовий склад та як наслідок напружено-деформований стан, термічну стійкість, механічні і трибологічні

APA, Harvard, Vancouver, ISO, and other styles

20

Якущенко, Іван Володимирович, Иван Владимирович Якущенко та Ivan Volodymyrovych Yakushchenko. "Структурні характеристики та фізико-механічні властивості багатокомпонентних нітридних покриттів до і після іонної імплантації". Thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/67473.

Full text

Abstract:

Дисертаційна робота присвячена дослідженню впливу імплантації негативних іонів Au- на фазовий склад, структурно-напружений і дефектний стан, механічні й трибологічні властивості п'яти- та шести- елементних нітридних покриттів (TiZrAlYNb)Nx і (TiZrHfVNbTa)Nx і вплив на них технологічних умов осадження (тиску робочого газу, і потенціалу зсуву підкладки). Результати дослідження елементного, фазового і напружено-деформованого стану покриттів свідчать про те, що в покриттях відбувається формування двух основних кристалічних фаз – ГЦК і ОЦК в залежності від тиску робочого газу. Фазовий стан змінюєт

APA, Harvard, Vancouver, ISO, and other styles

21

Максакова, Ольга Василівна, Ольга Васильевна Максакова та Olga Vasylivna Maksakova. "Структура та фізико-механічні властивості композитних покриттів на основі ZrN/CrN". Thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/80885.

Full text

Abstract:

Дисертаційна робота присвячена встановленню взаємозв’язку структури, хімічного складу та напруженого стану з термодинамічними і механічними властивостями композитних покриттів на основі ZrN/CrN. Електронографічні дослідження експериментальних покриттів свідчать про формування двофазного стану, який відповідає ГЦК-ZrN та дуплету ГЩПCr2N + ГЦК-CrN. З’ясовано, що основними дефектами кристалічної будови покриттів є повні та часткові дислокації і дефекти пакування. Уперше проведене дослідження впливу процесу високотемпературного відпалу на структурнофазовий стан покриттів ZrN/CrN показало, що в за

APA, Harvard, Vancouver, ISO, and other styles

22

Кравченко, Ярослав Олегович, Ярослав Олегович Кравченко та Yaroslav Olehovych Kravchenko. "Структура та властивості багатошарових та багатоелементних покриттів нанометрового масштабу на основі (TiAlSiY)N/MeN (Me=Mo, Cr, Zr)". Thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/77077.

Full text

Abstract:

Дисертаційна робота присвячена виявленню особливостей процесів синтезу, елементного і фазового складу, субструктури та властивостей багатоелементних та багатошарових покриттів нанометрового масштабу (TiAlSiY)N/MeN (Me=Mo, Cr, Zr), що синтезуються методом вакуумно-дугового осадження. Здійснено визначення зв'язків між структурою та механічними і трибологічними властивостями покриттів. Встановлено, що склад і кристалічна структура багатоелементних нітридних шарів в одношарових і багатошарових покриттях подібні: формуються тверді розчини на основі кубічного TiN з кристалічною граткою типу NaCl

APA, Harvard, Vancouver, ISO, and other styles

23

Албу-Бадрi, Ахммад М. Махммуд, Ахммад М. Махммуд Албу-Бадри та Akhmmad M. Makhmmud Albu-Badri. "Физико-механические свойства и структура покрытий на основе Ti, Al, Zr, Si и N". Thesis, Изд-во СумГУ, 2013. http://essuir.sumdu.edu.ua/handle/123456789/30567.

Full text

Abstract:

В дисертаційній роботі досліджено фізико-механічні та триботехнічні характеристики нанокомпозитних покриттів на основі Zr, Ti, Al, Sі та N, синтезованих вакуумно-дуговим методом із застосуванням ВЧ стимуляції. Проаналізовано вплив фізико-технологічних параметрів осадження на властивості нанокристалічних покриттів. Встановлено, що розміри кристалітів синтезованих нанокомпозитних покриттів на основі Ti-Al-N, Ti-Si-N і Ti-Zr-Si-N змінюються у діапазоні 10 – 25 нм. Виявлено кореляцію між елементним складом, мікроструктурою і механічними властивостями покриттів. Структура отриманих покриттів є визн

APA, Harvard, Vancouver, ISO, and other styles

24

杜禹寬. "Deposition of Al0.5CoCrCu1.5FeNi Films with Filtered Cathodic Vacuum Arc Deposition Apparatus." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/12714418462452046671.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

"Characterization of ta-C film prepared by pulsed filtered vacuum arc deposition system." 2000. http://library.cuhk.edu.hk/record=b5890332.

Full text

Abstract:

Lau Wing Fai.<br>Thesis (M.Phil.)--Chinese University of Hong Kong, 2000.<br>Includes bibliographical references (leaves 101-105).<br>Abstracts in English and Chinese.<br>Abstract --- p.i<br>Abstract (Chinese version) --- p.iii<br>Acknowledgement --- p.iv<br>Content --- p.v<br>List of figure caption --- p.vii<br>List of table caption --- p.xi<br>Chapter Chapter 1 --- Introduction<br>Chapter 1.1 --- Nomenclature --- p.1<br>Chapter 1.2 --- Comparison of diamond and DLC --- p.2<br>Chapter 1.3 --- Comparison of the amorphous hydrogenated and hydrogen free amorphous carbon --- p.4<br>Chapt

APA, Harvard, Vancouver, ISO, and other styles

26

"Characterization of FePt-based nanocomposite thin films prepared by pulsed filtered vacuum arc deposition." 2005. http://library.cuhk.edu.hk/record=b5892330.

Full text

Abstract:

by Lai Yiu Wai.<br>Thesis (M.Phil.)--Chinese University of Hong Kong, 2005.<br>Includes bibliographical references.<br>Abstract in English and Chinese.<br>Abstract<br>Abstract (Chinese)<br>Table of Contents<br>List of Figures<br>List of Tables<br>Chapter Chapter 1 --- Introduction<br>Chapter 1.1 --- Overview --- p.1-1<br>Chapter 1.2 --- Conventional recording --- p.1-2<br>Chapter 1.3 --- Superparamagnetism --- p.1-2<br>Chapter 1.4 --- Possible solutions --- p.1-4<br>Chapter 1.4.1 --- Perpendicular recording --- p.1-5<br>Chapter 1.4.2 --- Patterned media --- p.1-6<br>Chapter 1.4.3 --- Hig

APA, Harvard, Vancouver, ISO, and other styles

27

Guillen, E., I. Heras, Llorente G. Rincon, F. Lungwitz, M. Alcon-Camas, and R. Escobar-Galindo. "Room temperature deposition of highly dense TiO2 thin films by Filtered Cathodic Vacuum Arc." 2019. https://hzdr.qucosa.de/id/qucosa%3A33929.

Full text

Abstract:

A systematic study of TiO2 films deposited by dc filtered cathodic vacuum arc (FCVA) was carried out by varying the deposition parameters in a reactive oxygen atmosphere. The influence of the oxygen partial pressure on film properties is analyzed. Composition was obtained by Rutherford backscattering spectroscopy (RBS) measurements, which also allow us to obtain the density of the films. Morphology of the samples was studied by scanning electron microscopy (SEM) and their optical properties by ellipsometry. Transparent, very dense and stoichiometric TiO2 films were obtained by FCVA at room tem

APA, Harvard, Vancouver, ISO, and other styles

28

"Characterization of metal-carbon nanocomposite magnetic thin films prepared by pulsed filtered vacuum arc deposition." 2002. http://library.cuhk.edu.hk/record=b5891206.

Full text

Abstract:

by Poon Chun Yu.<br>Thesis (M.Phil.)--Chinese University of Hong Kong, 2002.<br>Includes bibliographical references (leaves 110-112).<br>Abstracts in English and Chinese.<br>ACKNOWLEDGEMENTS --- p.2<br>ABSTRACT --- p.3<br>TABLE OF CONTENTS --- p.5<br>LIST OF FIGURES --- p.8<br>LIST OF TABLES --- p.13<br>Chapter CHAPTER 1 --- INTRODUCTION --- p.14<br>Chapter 1.1 --- Overview --- p.14<br>Chapter 1.2 --- Ferromagnetism --- p.15<br>Chapter 1.3 --- Ferromagnetic granular thin film --- p.16<br>Chapter 1.4 --- Ferromagnetism-magnetization --- p.17<br>Chapter 1.5 --- Ferromagnetism - magneti

APA, Harvard, Vancouver, ISO, and other styles

29

"Characterization of magnetic nanocomposite thin films for high density recording prepared by pulsed filtered vacuum arc deposition." 2004. http://library.cuhk.edu.hk/record=b6073751.

Full text

Abstract:

by Chiah Man Fat.<br>"March 2004."<br>Thesis (Ph.D.)--Chinese University of Hong Kong, 2004.<br>Includes bibliographical references.<br>Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web.<br>Mode of access: World Wide Web.<br>Abstracts in English and Chinese.

APA, Harvard, Vancouver, ISO, and other styles

30

Rincón-Llorente, G., I. Heras, Rodríguez E. Guillén, E. Schumann, M. Krause, and R. Escobar-Galindo. "On the Effect of Thin Film Growth Mechanisms on the Specular Reflectance of Aluminium Thin Films Deposited via Filtered Cathodic Vacuum Arc." 2019. https://hzdr.qucosa.de/id/qucosa%3A33921.

Full text

Abstract:

The optimisation of the specular reflectance of solar collectors is a key parameter to increase the global yield of concentrated solar power (CSP) plants. In this work, the influence of filtered cathodic vacuum arc deposition parameters, particularly working pressure and deposition time, on the specular and diffuse reflectance of aluminium thin films, was studied. Changes in specular reflectance, measured by ultraviolet–visible and near-infrared spectroscopy (UV-vis-NIR) spectrophotometry, were directly correlated with thin film elemental concentration depth profiles, obtained by Rutherford ba

APA, Harvard, Vancouver, ISO, and other styles

31

謝涵嵋. "Deposition of CoCrCuFeNi Films with Cathodic Vacuum Arc Deposition Apparatus." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/42247626937510788686.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Won, Jhih-Wei, and 翁志偉. "Characterization and Synthesis of Fluorine Doped Amorphous Carbon Films by Filtered Cathodic Vacuum Arc System." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/30745923669553838173.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Chen, Cheng-Chuan, and 陳正銓. "Prepartion of Thermal Oxidation Resistant NiAl Thin Film by Vacuum Arc Deposition." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/16523326069532531969.

Full text

Abstract:

碩士<br>逢甲大學<br>材料科學學系<br>87<br>Thermal barrier coatings system is usually applied to gas turbine blade to enhance lifetime, but fail starting with bond coat oxidation. With good thermal oxidation resistance and thermal conduction, NiAl alloy is considered as a new bond coat material. In this study, we prepare NiAl thin film on carbon steel and 304 stainless by vacuum arc deposition with target composition Ni30Al70 followed by evaluation of oxidation resistance with cyclic oxidation test.SEM was used to observe surface topography, cross sectional morphology and film thickness. XRD was

APA, Harvard, Vancouver, ISO, and other styles

34

Lin, Chun-Chun, and 林君純. "Processing and properties of chromium carbide thin films synthesized by a filtered cathodic vacuum arc plasma system." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/56037751916529370172.

Full text

Abstract:

博士<br>國立清華大學<br>材料科學工程學系<br>95<br>In this thesis, the 90o-bend filtered cathodic vacuum arc (FCVA) technology was employed to deposit the chromium carbide films on the steel (AISI D2). This investigation was to compare various conditions which including the deposition temperature, the substrate bias voltage and the C2H2/Ar flow. The micro-structures, mechanical properties, corrosion behavior and optical properties of the chromium carbide film are thoroughly discussed. The uniform and dense of the chromium carbide films have been successfully synthesized using our FCVA system. The chromium carb

APA, Harvard, Vancouver, ISO, and other styles

35

Hsueh, Yang-Chih, and 薛仰志. "Characteristics and properties of fluorinated amorphous carbon (a-C:F) films deposited by filtered cathodic vacuum arc plasma system." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/54701157264833755449.

Full text

Abstract:

碩士<br>國立清華大學<br>材料科學工程學系<br>95<br>Diamond-like carbon (DLC) films are known for their high mechanical hardness, high wear resistance, low friction coefficients, optical transparency, electrical resistivities, besides, have extensively applications in many areas such as the electronic devices, high precise mechanisms, etc. Even though the incorporation of fluorine into DLC films will reduce their surface energy, don’t change their original excellent properties. The hydrophobic characteristics attach DLC films superior properties can be used in nonstick kitchenware and protective coatings for op

APA, Harvard, Vancouver, ISO, and other styles

36

Huang, Chien-Wei, and 黃健瑋. "Study of Transparent Conductive Zinc Oxide Thin Film on Plastic Substrates Deposited Cathodic Vacuum Arc Deposition System." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/wuvxq5.

Full text

Abstract:

博士<br>國立中山大學<br>機械與機電工程學系研究所<br>104<br>This work investigated pure, conductivity and transparency zinc oxide (ZnO) thin films on the polymer substrates at a low temperature (< 75℃) by using cathodic vacuum arc deposition (CVAD) system. We reported the material, optical, electrical and mechanical properties of ZnO thin film with various processing conditions. The pure ZnO thin films were deposited on the various polymer substrates such as PET, PVB and PI substrate and the properties of the deposited ZnO tin films were investigated. The figure of merit (FOM) based on the transparent and conducti

APA, Harvard, Vancouver, ISO, and other styles

37

Heras, I., M. Krause, G. Abrasonis, et al. "Advanced characterisation and optical simulation for the design of solar selective coatings based on carbon:transition metal carbide nanocomposites." 2019. https://hzdr.qucosa.de/id/qucosa%3A33924.

Full text

Abstract:

Solar selective coatings based on carbon transition metal carbide nanocomposite absorber layers were designed. Pulsed filtered cathodic arc was used for depositing amorphous carbon: metal carbide (a-C:MeC, Me = V, Mo) thin films. Composition and structure of the samples were characterized by ion beam analysis, X-ray diffraction, Raman spectroscopy, and transmission electron microscopy. The optical properties were determined by ellipsometry and spectrophotometry. Three effective medium approximations (EMA), namely Maxwell-Garnett, Bruggeman, and Bergman, were applied to simulate the optical beh

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!