Log in

Relevant bibliographies by topics / Gauge factor / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Gauge factor.

Dissertations / Theses on the topic 'Gauge factor'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 25 dissertations / theses for your research on the topic 'Gauge factor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Madhi, Elhoucine. "In-Situ Creep Monitoring Using Directional Potential Drop Sensors." University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1288378941.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Гричановська, Тетяна Михайлівна, Татьяна Михайловна Гричановская, Tetiana Mykhailivna Hrychanovska, et al. "Strain Properties of Thin Films Based on Ni and Ag in External Magnetic Field." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42685.

Full text

Abstract:

The paper describes the research results of influence of an external magnetic field with 200 mT induction on the longitudinal gauge factor of nano-crystalline film systems of Ni and Ag with different thickness of non-magnetic layer of Ag (or Ni) within elastic deformation up to 1% are presented. Considered methods of forming double- and triplex-layer structure based on thin films Ni and Ag and research of the structure and phase composition of the obtained samples. The correlation between the factor value of the longitudinal gauge factor, structural-phase state of film systems and total thick

APA, Harvard, Vancouver, ISO, and other styles

3

Melanitis, Nikolaos. "An investigation of the tensile, compressive and interfacial properties of carbon fibres using Laser Raman Spectroscopy." Thesis, Queen Mary, University of London, 1991. http://qmro.qmul.ac.uk/xmlui/handle/123456789/25731.

Full text

Abstract:

Laser Raman Spectroscopy (LRS) has been employed to characterise the structure of carbon fibres, the effect of surface treatment and the response of the material to externally applied loads. The strain sensitivity provided a unique relationship between the applied strain and the Raman frequency for each type of fibre, termed as the Raman Frequency Gauge Factor. After examining a wide range of fibres, of various Young's moduli and various manufacturing routes, it was concluded that both tensile and compressive properties of carbon fibres can be improved by controlling the fibre morphology durin

APA, Harvard, Vancouver, ISO, and other styles

4

Grychanovska, T. M., Віталій Володимирович Бібик, Виталий Владимирович Бибик, Vitalii Volodymyrovych Bibyk, O. S. Gryschuk, and L. A. Sheshenya. "Strain Properties of Thin Film Systems Based on Ni and Ag." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35207.

Full text

Abstract:

Research results of influence of a uniform magnetic field by induction of 200 mT on the longitudinal gauge factor of nanocrystalline film systems of Ni/Ag/Ni with different thickness of non-magnetic layer of Ag within elastic deformation up to 1 are presented. The paper describes methods of forming three-layer structure based on thin films Ni and Ag and research of the structure and phase composition of the obtained samples. The correlation between the factor value of the longitudinal gauge and structural-phase state of film systems is set. When you are citing the document, use the follo

APA, Harvard, Vancouver, ISO, and other styles

5

Макуха, Зінаїда Миколаївна, Зинаида Николаевна Макуха, Zinaida Mykolaivna Makukha, et al. "Strain Properties of Nanodimentional Thin Film Systems Based on Ag and Co." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34874.

Full text

Abstract:

The results of research strain deformation properties of thin films Ag, Co and two-layer film systems Ag/Co in the range of deformation l 0 – 1% were presented. The plastic deformation in Co layer caused a similar deformation in the entire film system, even if the strain range of Ag layer is not reached the limits of the transition elastic/plastic deformation. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/34874

APA, Harvard, Vancouver, ISO, and other styles

6

Макуха, Зінаїда Миколаївна, Зинаида Николаевна Макуха, Zinaida Mykolaivna Makukha та В. Б. Бутурлім. "Магнітодеформаційний ефект у плівкових системах на основі Сo та Cu". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/39707.

Full text

Abstract:

Тензорезистивні датчики на основі плівкових матеріалів практично вичерпали свій ресурс у відношенні підвищення чутливості, однак питання стосовно впливу різного роду полів, зокрема магнітних, на величину коефіцієнта тензочутливості залишається маловивченим. У даній роботі було досліджено вплив магнітного поля на коефіцієнт тензочутливості дво- та тришарових плівкових систем на основі Сo та Cu.

APA, Harvard, Vancouver, ISO, and other styles

7

Пазуха, Ірина Михайлівна, Ирина Михайловна Пазуха, Iryna Mykhailivna Pazukha, et al. "Electrophysical Properties of Nanodimentional Pt Thin Films." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35013.

Full text

Abstract:

The results of research structural and phase state, electrophysical properties (resistivity, temperature coefficient of resistance (TCR), strain gauge) of Pt thin films in the range of thicknesses from 7 to 50 nm were presented. Thin films Pt have fcc structure with lattice parameter a 0,390 nm after annealing. The temperature dependences characterized by relative large value of resistivity (ρ ~ 10-6 Ohm m) and relative small value of TCR (β ~ 10-4 K-1) respectively. Strain properties characterized by a wide interval of elastic deformation (more than 1 %), relatively low value of gauge fa

APA, Harvard, Vancouver, ISO, and other styles

8

Тищенко, Костянтин Володимирович, Константин Владимирович Тищенко та Kostiantyn Volodymyrovych Tyshchenko. "Електромеханічні властивості плівкових матеріалів на основі магнітних металів". Thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/67804.

Full text

Abstract:

Дисертацію присвячено комплексному дослідженю електромеханічних властивостей дво- і тришарових металевих плівок і плівкових сплавів на основі Fe і Pt, Gd або Ni та поясненню фізичних ефектів, які виникають у плівках в області пружної, квазіпружної і пластичної деформації. Встановлено взаємозв’язок між структурно-фазовим станом досліджуваних плівок і їх елекромеханічними властивостями. Показано, що зменшення розмірів зерен призводить до зменшення значення межі переходу від пружної до пластичної деформації. Уперше встановлені закономірності появи нелінійних ефектів у електромеханічних властивост

APA, Harvard, Vancouver, ISO, and other styles

9

Anger, Philipp. "Probing Electroweak Gauge Boson Scattering with the ATLAS Detector at the Large Hadron Collider." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-151612.

Full text

Abstract:

Electroweak gauge bosons as central components of the Standard Model of particle physics are well understood theoretically and have been studied with high precision at past and present collider experiments. The electroweak theory predicts the existence of a scattering process of these particles consisting of contributions from triple and quartic bosonic couplings as well as Higgs boson mediated interactions. These contributions are not separable in a gauge invariant way and are only unitarized in the case of a Higgs boson as it is described by the Standard Model. The process is tied to the ele

APA, Harvard, Vancouver, ISO, and other styles

10

Naeli, Kianoush. "Optimization of piezoresistive cantilevers for static and dynamic sensing applications." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28247.

Full text

Abstract:

Thesis (M. S.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2009.<br>Committee Chair: Brand, Oliver; Committee Member: Adibi, Ali; Committee Member: Allen, Mark G.; Committee Member: Bottomley, Lawrence A.; Committee Member: Degertekin, F. Levent.

APA, Harvard, Vancouver, ISO, and other styles

11

Bu, Lei. "Computational and experimental studies of strain sensitive carbon nanotube films." Doctoral thesis, Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-156473.

Full text

Abstract:

The excellent electrical and mechanical properties of carbon nanotubes (CNTs) provide interesting opportunities to realize new types of strain gauges. However, there are still challenges for the further development of CNT film strain gauges, for instance the lack of design rules, the homogeneity, stability and reproducibility of CNT films. This thesis aims to address these issues from two sides: simulation and experiment. Monte Carlo simulations show that both the sheet resistance and gauge factor of CNT films are determined essentially by the two-dimensional exclude area of CNTs. It was shown

APA, Harvard, Vancouver, ISO, and other styles

12

Jones, Martyna Maria. "Form factors and scattering amplitudes in supersymmetric gauge theories." Thesis, Queen Mary, University of London, 2018. http://qmro.qmul.ac.uk/xmlui/handle/123456789/53582.

Full text

Abstract:

The study of scattering amplitudes in the maximally supersymmetric Yang-Mills theory (N = 4 SYM) is a thriving field of research. Since the reformulation of perturbative gauge theory as a twistor string theory by Witten, this area has witnessed a flurry of activity, leading to the discovery of a multitude of novel techniques, such as recursion relations and MHV diagrams, collectively referred to as on-shell methods. In parallel, many previously hidden properties and rich mathematical structures have been found, a powerful example of such being the dual superconformal symmetry. It is natural to

APA, Harvard, Vancouver, ISO, and other styles

13

Embrey, Leslie. "Three-Dimensional Graphene Foam Reinforced Epoxy Composites." FIU Digital Commons, 2017. http://digitalcommons.fiu.edu/etd/3128.

Full text

Abstract:

Three-dimensional graphene foam (3D GrF) is an interconnected, porous structure of graphene sheets with excellent mechanical, electrical and thermal properties, making it a candidate reinforcement for polymer matrices. GrF’s 3D structure eliminates nanoparticle agglomeration and provides seamless pathways for electron travel. The objective of this work is to fabricate low density GrF reinforced epoxy composites with superior mechanical and electrical properties and study the underlying deformation mechanisms. Dip coating and mold casting fabrication methods are employed in order to tailor the

APA, Harvard, Vancouver, ISO, and other styles

14

Bell, Claudia A. "Impact of Peripheral Intravenous Catheter Gauge on Vessel Size, Blood Flow Velocity and Thrombus Volume Using Three-Dimensional Ultrasound Imaging." Thesis, Griffith University, 2022. http://hdl.handle.net/10072/413308.

Full text

Abstract:

Background and Aims Peripheral intravenous catheters (PIVCs) are the most commonly used vascular access device for short term medical therapy [1-3]. Despite their ubiquitous use, up to 69% of PIVCs fail before therapy is complete [4-6]. The failure of PIVCs delays treatment, causes discomfort and increases the risk of infection [5]. Reducing the PIVC failure rate by 10% (assuming a 69% failure rate and a 70 AUD replacement cost) would save 210 million AUD per annum, with 30 million PIVCs used annually [7] in Australia. Considering the impact that PIVC failure has on clinical practice and pati

APA, Harvard, Vancouver, ISO, and other styles

15

Oliveira, Orlando Olavo Aragao Aleixo Nerves de. "Mass spectrum and form factors for heavy baryons and a study of stochastic gauge fixing in lattice QCD." Thesis, University of Edinburgh, 1996. http://hdl.handle.net/1842/12727.

Full text

Abstract:

In this thesis we study two aspects of the lattice formulation of Quantum Chromodynamics (QCD). We first describe the study of baryons with one heavy and two light quarks. We compute the full spectrum for the ground state of the channels with quantum numbers <I>J<SUP>P</SUP></I> = <SUP>1</SUP>/<SUB>2</SUB> <SUP>+</SUP>, <SUP>3</SUP>/<SUB>2</SUB><SUP>+</SUP>, isospin <I>I </I>= 0,1 and strangeness <I>S </I>= 0, -1, -2. For the channel with quantum numbers <I>J<SUP>p </SUP></I>= <SUP>1</SUP>/<SUB>2</SUB><SUP>+ </SUP>we discuss the form factors for semileptonic decays of heavy baryons, compute th

APA, Harvard, Vancouver, ISO, and other styles

16

Peňák, Martin. "Minimalizace chyb v procesu obrábění s ohledem na operátora." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232170.

Full text

Abstract:

This thesis deals with analysis of measurement system capability in the production of rotary components from the viewpoint of operator error reduction and reliability of human factors. The aim is to carry out a literature review on the topic and then to analyze the current system in the company ZNOJEMSKÉ STROJÍRNY, s.r.o. Based on the obtained data suggest appropriate corrective arrangements to improve the current situation.

APA, Harvard, Vancouver, ISO, and other styles

17

Elshafee, Amany Saad Moharam [Verfasser], and Jens [Akademischer Betreuer] Vogel-Claussen. "Complications of CT-guided lung biopsy with a non-coaxial semiautomated 18 gauge biopsy system : frequency, severity and risk factors / Amany Saad Moharam Elshafee ; Akademischer Betreuer: Jens Vogel-Claussen ; Institut für Diagnostische und Interventionelle Radiologie." Hannover : Bibliothek der Medizinischen Hochschule Hannover, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021100410555649408916.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Sivapathasundaram, Mayooran. "Localised pull-through failures of thin steel roof battens subject to wind uplift loads." Thesis, Queensland University of Technology, 2016. https://eprints.qut.edu.au/204638/1/Mayooran_Sivapathasundaram_Thesis.pdf.

Full text

Abstract:

High wind events such as tropical cyclones, severe storms and tornadoes are more likely to impact the Australian coastal regions due to possible climate changes. Such events can be extremely destructive to building structures, in particular, low-rise buildings with lightweight roofing systems that are commonly made of thin steel roof sheeting and battens. Large wind suction loads that act on the roofs during high wind events cause premature failures of roof connections (fixings), leading to complete roof failures. Past wind damage investigations showed that the roof sheeting to batten conne

APA, Harvard, Vancouver, ISO, and other styles

19

Jatheeshan, Varathananthan. "Numerical and experimental studies of cold-formed steel floor systems made of hollow flange section joists in fire." Thesis, Queensland University of Technology, 2015. https://eprints.qut.edu.au/120145/1/Varathananthan_Jatheeshan_Thesis.pdf.

Full text

Abstract:

The cold-formed steel utilization in buildings has increased globally due to its higher strength to weight ratio, ease of transportation and rapid erection and dismantlement. However, cold-formed steel buildings must be designed with adequate Fire Resistance Ratings (FRR). Hence cold-formed Light gauge Steel Frames (LSF) are assembled using channel sections and lined with fire resistive plasterboards to provide load-bearing wall and floor systems. There is an industry need to develop LSF floor systems with improved FRR. Adding multiple layers of plasterboard to increase the FRR of LSF floor

APA, Harvard, Vancouver, ISO, and other styles

20

Barbosa, Miguel Fernando Silva Castro Neves. "Instrumentalização de um endoscópio através de sensores piezorresistivos impressos." Master's thesis, 2017. http://hdl.handle.net/1822/56914.

Full text

Abstract:

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e Computadores<br>A endoscopia é um procedimento não invasivo de visualização do interior do corpo humano. A série de equipamentos que englobam a torre de endoscopia têm como função processar a imagem captada pelo endoscópio e expô-la. O endoscópio é um tubo flexível equipado com um conjunto de mini dispositivos capazes de iluminar, filmar, irrigar com água, soprar com ar comprimido e sugar por vácuo dentro do corpo. Ao longo do exame, o endoscópio é controlado mecanicamente, o que exige um médico especialista de endoscopia.

APA, Harvard, Vancouver, ISO, and other styles

21

Perry, Robert James. "Electromagnetic Form Factors of Hadrons in the Space-Like Region." Thesis, 2019. http://hdl.handle.net/2440/124505.

Full text

Abstract:

The theory of the strong force is unique amongst the known forces of nature in that the strength of its interactions grow with distance. It is postulated that this leads to the empirically observed colour con nement hypothesis. This hypothesis states that quarks and gluons, the fundamental degrees of freedom in the strong force form together into complex bound states called hadrons, rather than appearing as free particles. Thus the study of the strong force becomes the study of hadrons and their structure. One way we may study the structure of these composite bound states is through thei

APA, Harvard, Vancouver, ISO, and other styles

22

Mohansundaram, S. M. "Large Enhancement in Metal Film Piezoresistive Sensitivity with Local Inhomogenization for Nanoelectromechanical Systems." Thesis, 2013. http://etd.iisc.ac.in/handle/2005/3388.

Full text

Abstract:

High performance and low cost sensors based on microelectromechanical systems (MEMS) have become commonplace in today's world. MEMS sensors, such as accelerometers, gy- roscopes, pressure sensors, and microphones, are routinely used in consumer electronics, automobiles, industrial and aerospace applications. Basically, all these devices mea- sure tiny displacements of micromachined mechanical structures in response to external stimuli. One of the widely used techniques to detect these displacements is piezoresistive sensing. Piezoresistive sensors are popular in MEMS due to their simplicity an

APA, Harvard, Vancouver, ISO, and other styles

23

Mohansundaram, S. M. "Large Enhancement in Metal Film Piezoresistive Sensitivity with Local Inhomogenization for Nanoelectromechanical Systems." Thesis, 2013. http://etd.iisc.ernet.in/2005/3388.

Full text

Abstract:

High performance and low cost sensors based on microelectromechanical systems (MEMS) have become commonplace in today's world. MEMS sensors, such as accelerometers, gy- roscopes, pressure sensors, and microphones, are routinely used in consumer electronics, automobiles, industrial and aerospace applications. Basically, all these devices mea- sure tiny displacements of micromachined mechanical structures in response to external stimuli. One of the widely used techniques to detect these displacements is piezoresistive sensing. Piezoresistive sensors are popular in MEMS due to their simplicity an

APA, Harvard, Vancouver, ISO, and other styles

24

"Compton Scattering and Renormalization of Twist Four Operators." Doctoral diss., 2016. http://hdl.handle.net/2286/R.I.38359.

Full text

Abstract:

abstract: In this thesis, I present the study of nucleon structure from distinct perspectives. I start by elaborating the motivations behind the endeavors and then introducing the key concept, namely the generalized parton distribution functions (GPDs), which serves as the frame- work describing hadronic particles in terms of their fundamental constituents. The second chapter is then devoted to a detailed phenomenological study of the Virtual Compton Scattering (VCS) process, where a more comprehensive parametrization is suggested. In the third chapter, the renormalization kernels that enters

APA, Harvard, Vancouver, ISO, and other styles

25

(13959462), Ronald Bishop, Jim Mitchell (8979473), and Talitha Best (9780782). "Exploring Mental Workload in Aviation Training." Thesis, 2022. https://figshare.com/articles/thesis/Exploring_Mental_Workload_in_Aviation_Training/24589329.

Full text

Abstract:

The increasing complexity of aviation training requirements and aircraft cockpit arrangements influence the mental workload (MWL) of pilots. One area of aviation training that demands further exploration is the MWL experienced by pilots across recreational aircraft (RA) and traditional general aviation (GA) aircraft training fleets. The purpose of this research was to explore the relationship between methods of presenting aeronautical data and MWL. There is a special interest in comparing the pilots’ experience in flying technically advanced (glass cockpit) recreational aircraft and analogue g

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!