Relevant bibliographies by topics / Heat loss method

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Heat loss method'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Heat loss method.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Heat loss method"

1

Rasch, W., P. Samson, J. Cote, and M. Cabanac. "Heat loss from the human head during exercise." Journal of Applied Physiology 71, no. 2 (1991): 590–95. http://dx.doi.org/10.1152/jappl.1991.71.2.590.

Full text
Abstract:
Evaporative and convective heat loss from head skin and expired air were measured in four male subjects at rest and during incremental exercise at 5, 15, and 25 degrees C ambient temperature (Ta) to verify whether the head can function as a heat sink for selective brain cooling. The heat losses were measured with an open-circuit method. At rest the heat loss from head skin and expired air decreased with increasing Ta from 69 +/- 5 and 37 +/- 18 (SE) W (5 degrees C) to 44 +/- 25 and 26 +/- 7 W (25 degrees C). At a work load of 150 W the heat loss tended to increase with increasing Ta: 119 +/- 2
APA, Harvard, Vancouver, ISO, and other styles
2

Lu, Li Bing, Meng Gao, and Dong Li. "Three Calculation Methods for the Influence of Heat Loss by Infiltration." Advanced Materials Research 712-715 (June 2013): 1589–92. http://dx.doi.org/10.4028/www.scientific.net/amr.712-715.1589.

Full text
Abstract:
For multi-storey buildings,different calculation methods of cold air infiltration heat consumption have great impact on heating heat load of rooms in winter. With taking different methods,the calculation results will vary widely when architectual desigh institutes calculate room heat load. This paper compared the gap method,the ventilation rate method and the percentage method for the certain rooms infiltration heat loss,trying to make that simple and in line with the actual engineering calculation method.
APA, Harvard, Vancouver, ISO, and other styles
3

Park, Yoonsang, Minkyu Choi, and Kenji Uchino. "Loss Determination Techniques for Piezoelectrics: A Review." Actuators 12, no. 5 (2023): 213. http://dx.doi.org/10.3390/act12050213.

Full text
Abstract:
Nowadays, heat dissipation in electronic devices is one of the serious issues to be resolved in energy and environmental terms. Piezoelectric materials are being utilized in many electronic devices, yet the roadblock toward further miniaturization of piezoelectric devices was identified as heat dissipation. Three types of losses (dielectric, elastic, and piezoelectric) are known to be related to the heat dissipation mechanism of piezoelectric materials, therefore obtaining accurate values of the loss factors is essential for minimizing the heat dissipation of piezoelectric devices. The purpose
APA, Harvard, Vancouver, ISO, and other styles
4

Kurosaka, Kazuya, and Hiroyuki Ikeda. "Heat Loss Reduction by the Aerogel “Over Wrapping Method”." JAPAN TAPPI JOURNAL 74, no. 6 (2020): 591–95. http://dx.doi.org/10.2524/jtappij.74.591.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

McCoard, S. A., H. V. Henderson, F. W. Knol, S. K. Dowling, and J. R. Webster. "Infrared thermal imaging as a method to study thermogenesis in the neonatal lamb." Animal Production Science 54, no. 9 (2014): 1497. http://dx.doi.org/10.1071/an14301.

Full text
Abstract:
The combination of heat generation and reducing heat loss from the skin surface is important for maintaining core body temperature in a neonate. Thermogenesis studies traditionally focus on measurement of core body temperature but not the contribution of radiated heat loss at the skin surface. This study aimed to evaluate the utility of using thermal imaging to measure radiated heat loss in newborn lambs. Continuous thermal images of newborn lambs were captured for 30 min each during the baseline (11−18°C), cold-exposure (0°C) and recovery (11−18°C) periods by using an infrared camera. Core bo
APA, Harvard, Vancouver, ISO, and other styles
6

Dear, Keith. "Modelling Productivity Loss from Heat Stress." Atmosphere 9, no. 7 (2018): 286. http://dx.doi.org/10.3390/atmos9070286.

Full text
Abstract:
Workers exposed to high ambient temperatures, either indoors or out, work slower. The few studies that have measured this loss of productivity show a degree of consistency across widely varying settings. I develop a class of 5-parameter probability models that express productivity as a function of environmental heat and show how the method of fitting can be adapted according to the completeness of the data available. As well as modelling the mean output, it is important to also consider variation between workers, and the model presented here achieves this. The method is illustrated using three
APA, Harvard, Vancouver, ISO, and other styles
7

Ha, Ji Soo. "A Study on the Heat Loss Improvement in a Refrigerator Ice Dispenser by Using Reverse Heat Loss Method." Journal of Energy Engineering 22, no. 2 (2013): 105–11. http://dx.doi.org/10.5855/energy.2013.22.2.105.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bennett, James G., Stephen L. Kessel, and Charles E. Rogers. "Corrosivity Test Methods for Polymeric Materials. Part 4- Cone Corrosimeter Test Method." Journal of Fire Sciences 12, no. 2 (1994): 175–95. http://dx.doi.org/10.1177/073490419401200204.

Full text
Abstract:
This is the fourth in a series of papers to investigate corrosivity test methods published by the Polyolefins Fire Performance Council, an operating unit of The Society of the Plastics Industry, Inc. In the first paper, 24 polymeric materials were evaluated for smoke corro sivity following the test method proposed by ASTM E05.21.70 which uses a ra diant combustion/exposure apparatus. The second paper discussed the evalua tion of the same materials using the CNET corrosion test method under consideration by ISO TC61/SC4/WG2 and IEC TC89/WG3 and compared the CNET results with the ASTM E05.21.70
APA, Harvard, Vancouver, ISO, and other styles
9

Fuchs, Marco, Cagatay Necati Dagli, and Stephan Kabelac. "Shape Optimization of Heat Exchanger Fin Structures Using the Adjoint Method and Their Experimental Validation." Energies 17, no. 5 (2024): 1246. http://dx.doi.org/10.3390/en17051246.

Full text
Abstract:
The freedom of additive manufacturing allows for the production of heat-transferring structures that are optimized in terms of heat transfer and pressure loss using various optimization methods. One question is whether the structural optimizations made can be reproduced by additive manufacturing and whether the adaptations can also be verified experimentally. In this article, adjoint optimization is used to optimize a reference structure and then examine the optimization results experimentally. For this purpose, optimizations are carried out on a 2D model as well as a 3D model. The material ch
APA, Harvard, Vancouver, ISO, and other styles
10

TSURUSHIMA, Tadashi, Takeshi MIYAMOTO, Yoshiteru ENOMOTO, Yasuo ASAUMI, and Yuzo AOYAGI. "Estimation of Heat Loss from Combustion Chamber by Heat Balance Method and Its Validation." Transactions of the Japan Society of Mechanical Engineers Series B 68, no. 674 (2002): 2935–42. http://dx.doi.org/10.1299/kikaib.68.2935.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Heat loss method"

1

Sjögren, Jan-Ulric. "Energy performance of multifamily buildings : building characteristic and user influence." Licentiate thesis, Umeå University, Department of Applied Physics and Electronics, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-35598.

Full text
Abstract:
<p>Today many professional property holders use different types of software for monthly energy analyses. The data is however often limited to energy and water use, that is paid for by the property holder. In year 2001, financed by the Swedish Energy Agency, the first steps were taken to create a national web based data base, eNyckeln. A property holder may then enter consumption data together with about 50 other building specific parameters to this data base in order to enable benchmarking and energy performance evaluations. Due to EU-regulations and the increasing awareness of energy and envi
APA, Harvard, Vancouver, ISO, and other styles
2

Kazda, Jan. "Návrh otopné soustavy a nuceného větrání pro dvougenerační vilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378281.

Full text
Abstract:
This Master's thesis deals with the evaluation of a current state of two-generation villa and its following proposal of the optimization. Evaluation includes calculation of heat loss of a current state. Optimization is based on the reduction of heat loss in the building, pressure balance of the system, change of heat source and installation of balanced ventilation. Chapter describing regulation of technology follows and in conclusion indicative price for the whole suggested technology is calculated.
APA, Harvard, Vancouver, ISO, and other styles
3

Bartoň, Petr. "Teplotní analýza synchronního stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219921.

Full text
Abstract:
The master’s thesis deals with analysis of warming and cooling of synchronous machine. The warming is caused by the machine’s losses resulting from the conversion of electrical energy into mechanical energy. There then can be achieved high values of temperature on the machine, which can lead to destruction of the machine. The transient thermal analysis, working on the finite element program Ansys Workbench, is used for thermal analysis. As an appropriate instrument, which serves for flow calculation, a module CFX in the program Ansys Workbench may be used. In the practical part the model for u
APA, Harvard, Vancouver, ISO, and other styles
4

Vendramin, Aurea Lúcia. "Método graus dia para avaliação do desempenho energético de uma edificação unifamiliar em diferentes condições climáticas." Universidade Estadual do Oeste do Parana, 2007. http://tede.unioeste.br:8080/tede/handle/tede/212.

Full text
Abstract:
Made available in DSpace on 2017-05-12T14:47:10Z (GMT). No. of bitstreams: 1 Aurea Lucia Vendramini.pdf: 426775 bytes, checksum: 564553d1ce5ca6d797acb90f3cf07ad3 (MD5) Previous issue date: 2007-07-12<br>The necessity of the application of climatic data for evaluation of energy performance in unifamiliares constructions if has become each more important time. Attempting against for this fact, one becomes necessary that these 0 variable are worked of form if to get resulted efficient. Studies in this area are very recent in Brazil and also exist a difficulty in the survey of the necessary regi
APA, Harvard, Vancouver, ISO, and other styles
5

Samek, Josef. "Optimální plnění drážky s ohledem na použitou izolaci motoru a pracovního zatížení." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-256525.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Taylor, James E. "Lidar heat map based channel sounding for complex wireless environments." Thesis, Queensland University of Technology, 2016. https://eprints.qut.edu.au/93809/1/James_Taylor_Thesis.pdf.

Full text
Abstract:
This thesis is a development of a methodology to predict the radio transmitter signal attenuation, via vertical density profiling of digitised objects, through the use of Light Detection and Ranging (LiDaR) measurements. The resulting map of indexed signal attenuation is useful for dynamic radio transmitter placement within the geospatial data set without expensive and tedious radio measurements.
APA, Harvard, Vancouver, ISO, and other styles
7

Sun, Ssu-Hsueh. "Finite element analyses of coupled heat and moisture transport in cylindrical porous media and coal logs /." free to MU campus, to others for purchase, 1997. http://wwwlib.umi.com/cr/mo/fullcit?p9841186.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Viens, Nicolas. "Étude des transferts thermiques lors de la coulée dans le procédé de fonderie à cire perdue." Thesis, Reims, 2016. http://www.theses.fr/2016REIMS039.

Full text
Abstract:
Les méthodologies de conception des grappes de fonderie reposent fondamentalement sur l’analyse de l’énergie dégagée par le métal au cours de sa solidification. En effet, l’interprétation de ces transferts thermiques permet de calculer localement le temps de solidification et donc d’identifier les points chauds d’une pièce de fonderie. Dans le cas du moulage en sable, ces échanges thermiques sont bien connus et depuis longtemps modélisés (Chvorinov). Leur modélisation correspond à un moule thermiquement infini, c’est à dire que toute l’énergie dégagée par le métal lors de sa solidification est
APA, Harvard, Vancouver, ISO, and other styles
9

Azzouz, Ali. "Conception d'un thermoanemometre et application a l'evaluation des transferts thermiques lors de l'ouverture d'une chambre froide industrielle." Paris, CNAM, 1988. http://www.theses.fr/1988CNAM0096.

Full text
Abstract:
Les pertes thermiques d'une chambre froide s'ouvrant par glissement lateral sont mesurees a l'aide d'un thermoanemometre a fil chaud, ayant seize capteurs de mesure de la vitesse du courant d'air. Les resultats experimentaux sont correles par une loi qui exprime le debit massique en fonction de l'ecart de temperature. Des rideaux d'air protecteurs sont experimentes. Ils permettent un gain de 38% sur le debit massique d'air chaud entrant en chambre froide
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Yin-Ting, and 劉胤廷. "Study on heat loss of the heat conduction equipment using response surface method and APP." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/g332vw.

Full text
Abstract:
碩士<br>國立高雄科技大學<br>機械工程系<br>107<br>In this thesis, response surface method is applied to the study of heat loss in heat conduction equipment. The heat conduction equipment experiment and COMSOL (Finite element analysis software) are used to simulate and find the heat loss of the equipment. At first, the experiment is conducted, and the factors that affect thermal conductivity the most are obtained. During the experiment, response surface method is utilized to calculate the effect of each factor and different experimental arrangement is obtained. The result of experiment carried out by differe
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Heat loss method"

1

Dumesnil, Jean G. Bon poids, bon coeur avec la methode Montignac. Flammarion Quebec, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gabriel, Jon. The Gabriel Method: Heal Your Digestion. The Gabriel Method Pty., 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

The Mediterranean Method: Lose Weight, Prevent Heart Disease, Avoid Memory Loss, and More with the Healthiest Diet on the Planet. Harmony, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

M.D. & Hans Diehl, DrHSc, MPH Aileen Ludington. Health Power: Health by Choice Not Chance (Proven method to reverse heart disease, beat diabetes, weight loss and slow aging). Review and Herald, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hamilton, Rhonda L. A Guide to Weight Loss Surgery. Praeger, 2008. http://dx.doi.org/10.5040/9798400660498.

Full text
Abstract:
With obesity rising at alarming rates in the US, UK, and developed countries around the world - so much that the US Department of Health has officially classified obesity as an illness and the World Health Organization has dubbed it a pandemic - weight-loss surgery is also on the rise. Traditional weight-loss programs - diet, exercise, and pharmaceuticals - are only effective for significant and sustained weight loss for about 10 percent of all people who try. The results are even more dismal for the obese aiming to lose not just a few pounds, but 50, 75, or more. And their health lies in the
APA, Harvard, Vancouver, ISO, and other styles
6

Impressed Current Test Method for Laboratory Testing of Aluminum Anodes. AMPP, 1990. https://doi.org/10.5006/nace_tm0190-1990.

Full text
Abstract:
Scope This standard test method describes a quality assurance procedure for determining the potential and current capacity characteristics under laboratory conditions for aluminum alloy anodes used for cathodic protection. Field performance of anodes should be evaluated to correspond to actual anode performance. This procedure was established in 1977-78 with revisions in 1980, 1982, and 1985. The committee knows of no NACE entity that has issued a comparable test method. This test method was prepared by NACE Task Group T-7L-2 on Aluminum Anode Quality Control, a component of Unit Committee T-7
APA, Harvard, Vancouver, ISO, and other styles
7

LEE, Jason. Fast This Way: Successful Methods to Lose Weight, Heal Inflammation, Keep Fit and Healthy Meal Plan. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Terrence, Linda. Intermittent Fasting for Women Over 60: A Stress-Free Method to Heal Your Body, Lose Weight, Improve Hormonal Health and Promote Longevity. Independently Published, 2022.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Smiseth, Otto A., Maurizio Galderisi, and Jae K. Oh. Left ventricle: diastolic function. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780198726012.003.0021.

Full text
Abstract:
Evaluation of diastolic function by echocardiography is useful to diagnose heart failure with preserved ejection fraction by showing signs of diastolic dysfunction, and regardless of ejection fraction, echocardiography can be used to estimate left ventricular (LV) filling pressure. Diastolic dysfunction occurs in a number of cardiac diseases other than heart failure and mild diastolic dysfunction is part of the normal ageing process. The fundamental disturbances in diastolic dysfunction are slowing of myocardial relaxation, loss of restoring forces, and reduced LV chamber compliance. As a comp
APA, Harvard, Vancouver, ISO, and other styles
10

Masley, Steven. Mediterranean Method: Your Complete Plan to Harness the Power of the Healthiest Diet on the Planet -- Lose Weight, Prevent Heart Disease, and More! Potter/Ten Speed/Harmony/Rodale, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Heat loss method"

1

Kurihara, Minoru, and Eiji Suzuki. "Method of Decreasing the Heat Loss Caused by Eddy Currents in a Superconducting Coil." In Advances in Superconductivity XI. Springer Japan, 1999. http://dx.doi.org/10.1007/978-4-431-66874-9_340.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Karimi Askarani, Kayvan, Tom Sale, and Tom Palaia. "Natural Source Zone Depletion of Petroleum Hydrocarbon NAPL." In Advances in the Characterisation and Remediation of Sites Contaminated with Petroleum Hydrocarbons. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34447-3_5.

Full text
Abstract:
AbstractIn the last decade, it has become widely recognized that petroleum found in soil and groundwater in the form of non-aqueous phase liquid (NAPL) is depleted by naturally occurring microbial communities. Losses of petroleum NAPL via natural processes are referred to as natural source zone depletion (NSZD). The natural loss rates of petroleum NAPL are large enough that they can often be the primary component of a site management strategy. Losses of NAPL through NSZD processes provide by-products such as CO2, CH4, and heat. As such, based on consumption of O2, production of CO2 and CH4, ge
APA, Harvard, Vancouver, ISO, and other styles
3

Yan, Shuai, Xiaoliang Shao, and Xianting Li. "A Superposition Method to Predict Indoor Temperature Distribution with Convective Heat Gain/Loss Through the Building Envelope." In Environmental Science and Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9520-8_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Koch, Lukas, Felix Butz, Gordana Krüger, and Frank Döpper. "Thermal Modeling Challenges of High-Speed Motorized Spindles." In Lecture Notes in Production Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34486-2_18.

Full text
Abstract:
AbstractThis paper investigates the thermal modeling challenges of high-speed motorized spindles up to 40,000 rpm. The thermal expansion and deflection of motorized spindles are critical determinants for the resulting tool center point displacement and the achievable machining accuracy of machine tools. In order to compensate, finite element and reduced physical models (digital twins) therefore require an accurate understanding of the thermal boundary conditions. In motorized spindles, heat sources are of great significance to the resulting temperature field. However, it is very difficult to a
APA, Harvard, Vancouver, ISO, and other styles
5

Hötte, Felix, Oliver Günther, Christoph von Sethe, Matthias Haupt, Peter Scholz, and Michael Rohdenburg. "Lifetime Experiments of Regeneratively Cooled Rocket Combustion Chambers and PIV Measurements in a High Aspect Ratio Cooling Duct." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_18.

Full text
Abstract:
Abstract This paper aims at experimental investigations of the life limiting mechanisms of regeneratively cooled rocket combustion chambers, especially the so called doghouse effect. In this paper the set up of a cyclic thermo-mechanical fatigue experiment and its results are shown. This experiment has an actively cooled fatigue specimen that is mounted downstream of a subscale GOX-GCH$$_{\text {4}}$$ combustion chamber with rectangular cross section. The specimen is loaded cyclically and inspected after each cycle. The effects of roughness, the use of thermal barrier coatings, the length of t
APA, Harvard, Vancouver, ISO, and other styles
6

Xu, Qian. "Influence of Key Structural Parameters on Total Heat Loss and Heat Transfer Between Tubes." In Application and Extension of Numerical Methods in Heating Pipeline. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-1120-1_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yosifova, Veneta. "Methods and Means for Analyzing Heat-Loss in Buildings for Increasing Their Energy Efficiency." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-55190-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Racasan, Radu, Paul Bills, Liam Blunt, Alister Hart, and John Skinner. "Method for Characterization of Material Loss from Modular Head-Stem Taper Surfaces of Hip Replacement Devices." In Modularity and Tapers in Total Joint Replacement Devices. ASTM International, 2015. http://dx.doi.org/10.1520/stp159120140139.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cremerius, Jonas, Luise Pufahl, Finn Klessascheck, and Mathias Weske. "Event Log Generation in MIMIC-IV Research Paper." In Lecture Notes in Business Information Processing. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-27815-0_22.

Full text
Abstract:
AbstractPublic event logs are valuable for process mining research to evaluate process mining artifacts and identify new and promising research directions. Initiatives like the BPI Challenges have provided a series of real-world event logs, including healthcare processes, and have significantly stimulated process mining research. However, the healthcare related logs provide only excerpts of patient visits in hospitals. The Medical Information Mart for Intensive Care (MIMIC)-IV database is a public available relational database that includes data on patient treatment in a tertiary academic medi
APA, Harvard, Vancouver, ISO, and other styles
10

Zattara, Eduardo E., and Fernando A. Fernández-Alvarez. "Collecting and Culturing Lineus sanguineus to Study Nemertea WBR." In Methods in Molecular Biology. Springer US, 2022. http://dx.doi.org/10.1007/978-1-0716-2172-1_12.

Full text
Abstract:
AbstractWhole-body regeneration, the ability to reconstruct complete individuals from small fragments, is rare among ribbon worms (phylum Nemertea) but present in the pilidiophoran species Lineus sanguineus. This species can regenerate complete individuals from a tiny midbody section, and even from a quarter of a piece, provided it retains a fragment of a lateral nerve cord. While a few other unrelated species of ribbon worms are also excellent regenerators, L. sanguineus is unique in having evolved its regenerative abilities quite recently and thus offers an exceptional opportunity to gain in
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Heat loss method"

1

Ramchandran, S. "NDT of Corrosion Wall Thinning and Pitting in Heat Exchangers and Boiler Systems Using RFET." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92301.

Full text
Abstract:
Abstract Remote Field Electromagnetic Technique (RFET) has proven to be a very reliable and dependable Nondestructive Method for evaluating general corrosion wall loss in tubular materials which includes both ferritic and austenitic materials. Up to this time quantitative measurements of corrosion wall loss was not available and RFET provide an excellent way of determining the wall losses. Details of RFET methods, the instrumentations used, the signal processing software and field examples are presented in this paper.
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Yang, Guoen Zhou, Hongzheng Xu, Pengwang Zhang, Mingdong Lei, and Jingchen Lei. "Research and application of heat loss calculation and analysis method in the design process of conductivity sensors for high-voltage direct current converter valves." In 2024 IEEE International Conference on DC Technologies and Systems (DCTS). IEEE, 2024. https://doi.org/10.1109/dcts62535.2024.10939431.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sheng, James J., and Anil K. Ambastha. "A Practical Thermal Well Testing Method Including Heat Loss Effects." In SPE International Heavy Oil Symposium. Society of Petroleum Engineers, 1995. http://dx.doi.org/10.2118/30306-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Amagai, Yasutaka, Takeshi Shimazaki, Hiroyuki Fujiki, Atsushi Yamamoto, and Nobu-hisa Kaneko. "Analysis of heat loss for measurement of Thomson coefficient using AC calorimetric method." In 2016 Conference on Precision Electromagnetic Measurements (CPEM 2016). IEEE, 2016. http://dx.doi.org/10.1109/cpem.2016.7540790.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rodrigues da Silva, Fredherico, Cristian Alex Hoerlle, Andre Carlos Contini, and Fernando Pereira. "IMPLEMENTATION OF HEAT LOSS MODELING FOR LAMINAR DIFFUSION CH4 FLAMES IN THE FGM METHOD." In 25th International Congress of Mechanical Engineering. ABCM, 2019. http://dx.doi.org/10.26678/abcm.cobem2019.cob2019-0685.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cai, Mingjie, Hongjie Deng, Feixiong Chen, and Zhenguo Shao. "State Variables-Based Interval Optimization Method of Combined Electric and Heat Microgrid Considering loss." In 2022 7th Asia Conference on Power and Electrical Engineering (ACPEE). IEEE, 2022. http://dx.doi.org/10.1109/acpee53904.2022.9783822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Osakabe, Masahiro. "Effect of Header on Latent Heat Recovery Heat Exchanger." In ASME 2011 Power Conference collocated with JSME ICOPE 2011. ASMEDC, 2011. http://dx.doi.org/10.1115/power2011-55359.

Full text
Abstract:
The most part of energy losses in heat &amp; power system is due to the heat released by the exhaust gas to atmosphere. The exhaust gas consists of non-condensable gas and steam with sensible and latent heat. As a lot of latent heat is included in the exhaust gas, its recovery is very important to improve the system efficiency. Based on the previous basic studies, a thermal hydraulic prediction method for latent heat recovery exchangers was proposed. Two kinds of compact heat exchanger with staggered banks of large and small diameter tubes were designed and fabricated based on the prediction m
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Li, Meijun Bao, Liusong Zhang, Xueliang Fan, and Daosheng Tang. "Power Loss Calculation Method for IGBT in Converter Valve Based on Inverse Heat Transfer Problem." In 2021 IEEE 2nd China International Youth Conference on Electrical Engineering (CIYCEE). IEEE, 2021. http://dx.doi.org/10.1109/ciycee53554.2021.9676787.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Dongbo, Shaomin Xiong, David Braunstein, Xingcai Guo, Sripathi Canchi, and Qing Dai. "A Method to Measure the Media Lubricant Loss After HAMR Recording." In ASME 2016 Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/isps2016-9608.

Full text
Abstract:
Heat assisted magnetic recording (HAMR) is anticipated to increase the areal density in hard disk drives to multiple Tb/in2. During HAMR recording, as a near filed laser light heats the media to the temperature above Curie point to assist magnetic switching, the lubricant that is typically applied to the disk surface will be under an intensive thermal stress, which will lead to the lubricant desorption and/or decomposition, and frequently accompanied with the underneath carbon overcoat (COC) graphitization and oxidation. Due to the optical properties change of the COC at such a high temperatur
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, H. C., B. Schmandt, and H. Herwig. "Determination of Loss Coefficients for Micro-Flow Devices: A Method Based on the Second Law Analysis (SLA)." In ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer. ASMEDC, 2009. http://dx.doi.org/10.1115/mnhmt2009-18192.

Full text
Abstract:
The concept of head loss coefficients K for the determination of losses in conduit components is discussed in detail. While so far it has only been applied to fully turbulent flows it is extended here to also cover the laminar flow regime. Specific numbers of K can be determined by integration of the entropy production field (second law analysis). This general approach is discussed and illustrated with the specific example of a conical diffusor.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Heat loss method"

1

Fang, Jin B. Evaluation of thermal probe method for estimating the heat loss from underground heat distribution systems. National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nist.ir.88-4009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Petzke, Jonas, Dennis Kleinschmidt, and Florian Brüning. Simulative approach for predicting the heating behavior of elastomers in the solid-state microwave heating process. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.ms.2.

Full text
Abstract:
The increasing demand for energy efficient vulcanization of rubber extrusions requires the optimization and further development of existing processes. Microwave vulcanization allows the energy required for this process to be coupled directly into the material via dielectric losses. Microwave heating requires the polarity of the rubber so that the electromagnetic wave can cause the polar components of the material to vibrate. These vibrations cause internal friction, resulting in an increase in the temperature of the rubber compound. In this research project, microwaves were used to heat a rubb
APA, Harvard, Vancouver, ISO, and other styles
3

Baral, Aniruddha, Jeffery Roesler, and Junryu Fu. Early-age Properties of High-volume Fly Ash Concrete Mixes for Pavement: Volume 2. Illinois Center for Transportation, 2021. http://dx.doi.org/10.36501/0197-9191/21-031.

Full text
Abstract:
High-volume fly ash concrete (HVFAC) is more cost-efficient, sustainable, and durable than conventional concrete. This report presents a state-of-the-art review of HVFAC properties and different fly ash characterization methods. The main challenges identified for HVFAC for pavements are its early-age properties such as air entrainment, setting time, and strength gain, which are the focus of this research. Five fly ash sources in Illinois have been repeatedly characterized through x-ray diffraction, x-ray fluorescence, and laser diffraction over time. The fly ash oxide compositions from the sam
APA, Harvard, Vancouver, ISO, and other styles
4

Madrzykowski, aniel, Craig Weinschenk, and Joseph Willi. Exposing Fire Service Hose in a Flashover Chamber. UL's Fire Safety Research Institute, 2018. http://dx.doi.org/10.54206/102376/tkog7594.

Full text
Abstract:
At the request of the Fire Department City of New York (FDNY), UL’s Fire Safety Research Institute (FSRI) instrumented and documented a series of 12 thermal exposure hose experiments that were conducted in the burn compartment of an FDNY flashover simulator. The main objective of the experiments was to observe the performance of fire hoses exposed to the heat flux from flaming hot gas layer conditions above the hose. FDNY collected a variety of hose types that represented a cross section of commercially available materials and construction methods. The thermal exposures generated in the burn c
APA, Harvard, Vancouver, ISO, and other styles
5

Rouseff, Russell L., and Michael Naim. Characterization of Unidentified Potent Flavor Changes during Processing and Storage of Orange and Grapefruit Juices. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7585191.bard.

Full text
Abstract:
Citrus juice flavor quality traditionally diminishes after thermal processing and continuously during storage. Our prior studies found that four of the five most potent off-aromas formed during orange juice storage had not been identified. The primary emphasis of this project was to characterize and identify those potent flavor degrading aroma volatiles so that methods to control them could be developed and final flavor quality improved. Our original objectives included: 1 Isolate and characterize the most important unidentified aroma impact compounds formed or lost during pasteurization and s
APA, Harvard, Vancouver, ISO, and other styles
6

Shomer, Ilan, Louise Wicker, Uzi Merin, and William L. Kerr. Interactions of Cloud Proteins, Pectins and Pectinesterases in Flocculation of Citrus Cloud. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7580669.bard.

Full text
Abstract:
The overall objective was to understand the cloud flocculation of citrus juice by characterization of the interactions between proteins and pectins, and to determine the role of PE isozymes in catalyzing this phenomenon. Specific objectives were to: 1. identify/characterize cloud-proteins in relation to their coagulable properties and affinity to pectins; 2. to determine structural changes of PME and other proteins induced by cation/pectin interactions; 3. localize cloud proteins, PME and bound protein/pectates in unheated and pasteurized juices; 4. to create "sensitized" pectins and determine
APA, Harvard, Vancouver, ISO, and other styles
7

Shmulevich, Itzhak, Shrini Upadhyaya, Dror Rubinstein, Zvika Asaf, and Jeffrey P. Mitchell. Developing Simulation Tool for the Prediction of Cohesive Behavior Agricultural Materials Using Discrete Element Modeling. United States Department of Agriculture, 2011. http://dx.doi.org/10.32747/2011.7697108.bard.

Full text
Abstract:
The underlying similarity between soils, grains, fertilizers, concentrated animal feed, pellets, and mixtures is that they are all granular materials used in agriculture. Modeling such materials is a complex process due to the spatial variability of such media, the origin of the material (natural or biological), the nonlinearity of these materials, the contact phenomenon and flow that occur at the interface zone and between these granular materials, as well as the dynamic effect of the interaction process. The lack of a tool for studying such materials has limited the understanding of the phen
APA, Harvard, Vancouver, ISO, and other styles
8

Wilson, Thomas E., Avraham A. Levy, and Tzvi Tzfira. Controlling Early Stages of DNA Repair for Gene-targeting Enhancement in Plants. United States Department of Agriculture, 2012. http://dx.doi.org/10.32747/2012.7697124.bard.

Full text
Abstract:
Gene targeting (GT) is a much needed technology as a tool for plant research and for the precise engineering of crop species. Recent advances in this field have shown that the presence of a DNA double-strand break (DSB) in a genomic locus is critical for the integration of an exogenous DNA molecule introduced into this locus. This integration can occur via either non-homologous end joining (NHEJ) into the break or homologous recombination (HR) between the broken genomic DNA and the introduced vector. A bottleneck for DNA integration via HR is the machinery responsible for homology search and s
APA, Harvard, Vancouver, ISO, and other styles
9

Poverenov, Elena, Tara McHugh, and Victor Rodov. Waste to Worth: Active antimicrobial and health-beneficial food coating from byproducts of mushroom industry. United States Department of Agriculture, 2014. http://dx.doi.org/10.32747/2014.7600015.bard.

Full text
Abstract:
Background. In this proposal we suggest developing a common solution for three seemingly unrelated acute problems: (1) improving sustainability of fast-growing mushroom industry producing worldwide millions of tons of underutilized leftovers; (2) alleviating the epidemic of vitamin D deficiency adversely affecting the public health in both countries and in other regions; (3) reducing spoilage of perishable fruit and vegetable products leading to food wastage. Based on our previous experience we propose utilizing appropriately processed mushroom byproducts as a source of two valuable bioactive
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Heat loss method' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography