To see the other types of publications on this topic, follow the link: High-speed jet.

Dissertations / Theses on the topic 'High-speed jet'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'High-speed jet.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Crittenden, Thomas M. "Fluid actuators for high speed flow control." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/7742.

Full text
Abstract:
In order to extend fluid-based flow control techniques that have been demonstrated at low subsonic speeds to high speed flows, it is necessary to develop actuators having sufficient momentum to control and manipulate high speed flows. Two fluidic actuation approaches are developed where the control jet may reach supersonic velocities and their performance is characterized. The first actuator is a compressible synthetic (zero net mass flux) jet. This is an extension of previous work on synthetic jets with an increase in driver power yielding substantial pressurization of the cavity such that th
APA, Harvard, Vancouver, ISO, and other styles
2

Dover, Stephen James. "Rapid prototyping using high speed selective jet electrodeposition." Thesis, Bucks New University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Garcia, Robert Gordon. "CFD simulation of flow fields associated with high speed jet impingement on deflectors." Thesis, Virginia Tech, 2007. http://hdl.handle.net/10919/31675.

Full text
Abstract:
Computational Fluid Dynamics is used to analyze the formation of under-expanded jets and to investigate the three-dimensional flow field associated with the impingement of free jets onto stationary deflectors. This investigation was performed to develop a verified modeling ability for such problems. Predictions were compared with the experimental results obtained by Donaldson and Snedeker [1]. Computational models for free and impinging jets were created according to the data provided in Ref. 1. Numerical results for each of the experiments performed in this benchmark report are presented.
APA, Harvard, Vancouver, ISO, and other styles
4

Weiland, Christopher Jude. "Characteristics of the High Speed Gas-Liquid Interface." Diss., Virginia Tech, 2009. http://hdl.handle.net/10919/26150.

Full text
Abstract:
The objective of this dissertation was to investigate physical characteristics of high speed gas-liquid interfaces for the cases of subsonic, transonic, and supersonic gas jets submerged underwater and the transient development of an underwater projectile reaching the supercavitating state. These studies are motivated by the need to understand the basic physics associated with a novel submersible missile launcher termed the Water Piercing Missile Launcher (WPML). This dissertation presents the first study of high speed round and rectangular gas jets submerged underwater utilizing a global opt
APA, Harvard, Vancouver, ISO, and other styles
5

Sarraf, Shirazi Alireza. "Transient jet impaction on a high speed moving surface." Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54244.

Full text
Abstract:
In the railroad industry liquid friction modifiers are applied on the rail track in the form of a liquid jet in order to reduce the friction and fuel consumption. In this application, the transfer efficiency of the liquid on the rail track is very important. To maximize the transfer efficiency, Newtonian and non-Newtonian transient liquid jet impingement on a dry moving surface was studied. Five different water glycerin solutions with widely varying shear viscosities were used as Newtonian test liquids to isolate the effect of shear viscosity from other fluid properties. Furthermore, the eff
APA, Harvard, Vancouver, ISO, and other styles
6

Malla, Bhupatindra. "Study of High-speed Subsonic Jets using Proper Orthogonal Decomposition." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1352397174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Srinivasan, Ravichandra. "Improved understanding and control of high-speed jet interaction flows." Texas A&M University, 2005. http://hdl.handle.net/1969.1/3055.

Full text
Abstract:
A numerical study of the flow field generated by injection through diamondshaped orifices into a high-speed flow is presented in this document. Jet interaction flows have a wide range of applications in the field of engineering. These applications include the use of jets for fuel injection in scramjets, for reaction control of high-speed aerodynamic bodies and as cooling jets for skins of high-speed vehicles. A necessary requirement in the use of transverse jets for these and other applications is a thorough understanding of the physics of the interaction between the jet and freestream. This i
APA, Harvard, Vancouver, ISO, and other styles
8

Bocking, C. E. "High speed selective jet electrodeposition of gold and gold alloys using single circular jets." Thesis, Loughborough University, 1994. https://dspace.lboro.ac.uk/2134/6740.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lyes, Peter A. "Low speed axial compressor design and evaluation : High speed representation and endwall flow control studies." Thesis, Cranfield University, 1999. http://hdl.handle.net/1826/4251.

Full text
Abstract:
This Thesis reports the design, build and test of two sets of blading for the Cranfield University low speed research compressor. The first of these was a datum low speed design based on the fourth stage of the DERA high speed research compressor C 147. The emphasis of this datum design was on the high-to-low speed transformation process and the evaluation of such a process through comparing detailed flow measurements from both compressors. Area traverse measurements in both the stationary and rotating frame of reference were taken at Cranfield along with overall performance, blade surface sta
APA, Harvard, Vancouver, ISO, and other styles
10

Davies, Peter Nicholas Hugh. "Multiple impact jet apparatus : equipment and high-speed rain damage studies." Thesis, University of Cambridge, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.293390.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Tan, Phay Kiat 1974. "Three dimensional printing : solenoid value-jet for continuous high-speed application." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/9262.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2000.<br>Includes bibliographical references (leaves 130-131).<br>3D Printing is the rapid prototyping of parts by the deposition of a binder material in successive layers onto specific regions of a powder substrate. The current challenge in 3 DP(TM) is the demand for larger built-volume in a shorter time with a high level operational reliability. The solenoid valve-jet printhead possesses key characteristics, which can be used in the design of a scaled-up 3 DP(TM) machine. An experimental study was conducte
APA, Harvard, Vancouver, ISO, and other styles
12

Pinier, Jeremy. "Low-dimensional techniques for active control of high-speed jet aeroacoustics." Related electronic resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2007. http://wwwlib.umi.com/cr/syr/main.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Pasumarti, Venkata-Ramya. "Large eddy simulation of heated pulsed jets in high speed turbulent crossflow." Thesis, Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/37291.

Full text
Abstract:
The jet-in-crossflow problem has been extensively studied, mainly because of its applications in film cooling and injector designs. It has been established that in low-speed flows, pulsing the jet significantly enhances mixing and jet penetration. This work investigates the effects of pulsing on mixing and jet trajectory in high speed (compressible) flow, using Large Eddy Simulation. Jets with different density ratios, velocity ratios and momentum ratios are pulsed from an injector into a crossflow. Density ratios used are 0.55 (CH4/air), 1.0 (air/air) and 1.5 (CO2/air). Results are compared w
APA, Harvard, Vancouver, ISO, and other styles
14

Choi, Woong-Sik. "Flame stabilization by a plasma driven radical jet in a high speed flow." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/29780.

Full text
Abstract:
Thesis (Ph.D)--Mechanical Engineering, Georgia Institute of Technology, 2009.<br>Committee Chair: Zinn, Ben; Committee Co-Chair: Jagoda, Jeff; Committee Member: Glezer, Ari; Committee Member: Jeter, Sheldon; Committee Member: Neumeier, Yedidia. Part of the SMARTech Electronic Thesis and Dissertation Collection.
APA, Harvard, Vancouver, ISO, and other styles
15

Trumper, Miles Thomas. "A study of nozzle exit boundary layers in high-speed jet flows." Thesis, Loughborough University, 2006. https://dspace.lboro.ac.uk/2134/31797.

Full text
Abstract:
The requirement for reduced jet noise in order to meet stringent noise legislation (civil aviation), and low infra-red observability and the use of unconventional exhaust nozzle configurations to improve aircraft survivability and performance (military aviation) is driving research to develop a better understanding of jet development and mixing mechanisms. One option open to the engineer is the use of small-scale model testing to investigate jets flows and provide valuable data for the validation of numerical models. Although more economical than large/full scale testing, additional factors th
APA, Harvard, Vancouver, ISO, and other styles
16

Rana, Zeeshan Ahmed. "Implicit LES of turbulent compressible high-speed flows with transverse jet injection." Thesis, Cranfield University, 2011. http://dspace.lib.cranfield.ac.uk/handle/1826/7218.

Full text
Abstract:
Implicit Large Eddy Simulation (ILES) has rapidly emerged as a powerful technique which is utilised to explore the unsteady compressible turbulent flows. Apart from o ering accuracy in numerical simulations, ILES is also computationally e cient compared to Direct Numerical Simulations or conventional Large Eddy Simulations. This report focuses on the validation of the existing high-resolution methods within the framework of ILES and explores its applications to the high-speed compressible turbulent flows such as a typical flow field inside a scramjet engine. The methodology applied in the curr
APA, Harvard, Vancouver, ISO, and other styles
17

Cutbill, Sue. "A study of the turbulent flow of a high speed Coanda jet." Thesis, Durham University, 1998. http://etheses.dur.ac.uk/4743/.

Full text
Abstract:
This thesis presents an experimental investigation into a compressible turbulent wall jet issuing from a slot, and flowing over a surface with streamwise curvature, followed by a plane wall recovery region. The purpose of this data was to provide suitable test cases to aid in the design and validation of turbulence models used for curved flow situations in computational fluid dynamics. The presence of streamwise curvature provides an extra rate of strain to the flow which effects both the mean flow field and the turbulence structure. The effects of curvature are dependent on the ratio of the s
APA, Harvard, Vancouver, ISO, and other styles
18

Harris, Christopher A. "Acoustics and Fluid Dynamics Studies of High Speed Jet Noise Reduction Devices." University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1218687698.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Christie, Robert. "Lateral jet interaction with a supersonic crossflow." Thesis, Cranfield University, 2010. http://dspace.lib.cranfield.ac.uk/handle/1826/6815.

Full text
Abstract:
A lateral jet in a supersonic crossflow creates a highly complex three-dimensional flow field which is not easily predicted. The aim of this research was to assess the use of a RANS based CFD method to simulate a lateral jet in supersonic crossflow interaction by comparing the performance of available RANS turbulence models. Four turbulence models were trialled in increasingly complex configurations; a flat plate, a body of revolution and a body of revolution at incidence. The results of this numerical campaign were compared to existing experimental and numerical data. Overall the Spalart-Allm
APA, Harvard, Vancouver, ISO, and other styles
20

Hileman, James Isaac. "Large-scale structures and noise generation in high-speed jets." Connect to this title online, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1078776079.

Full text
Abstract:
Thesis (Ph. D.)--Ohio State University, 2004.<br>Title from first page of PDF file. Document formatted into pages; contains xxviii, 365 p.; also includes graphics. Includes bibliographical references (p. 269-279).
APA, Harvard, Vancouver, ISO, and other styles
21

Sterling, George Earl Grant. "An experimental study on jet impingement on a very high speed moving surface." Thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/43074.

Full text
Abstract:
Motivated by the need to improve transfer efficiencies of liquid coatings from jet impingement, an experimental investigation into jet impingement on very high speed moving surfaces is presented. Seven different Newtonian liquids with widely varying shear viscosities were made to impinge on a surface which could be made to move at speeds up to 350km/hr. Tests for the Newtonian liquids were done with several modified surfaces to study the effects of roughness and surface inconsistencies. Nozzle sizes and impingement angles were varied to interrogate their effects on the interaction of the impac
APA, Harvard, Vancouver, ISO, and other styles
22

Sexton, Robert Christopher. "A nearfield investigation into the sound pressure levels of high speed jet plumes." Thesis, University of Southampton, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386665.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Alkandry, Hind. "An Investigation of the Irrotational Near Field of an Excited High Speed Jet." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1366213652.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Skeen, Andrew. "The development of high-speed PIV techniques and their application to jet noise measurement." Thesis, University of Warwick, 2006. http://wrap.warwick.ac.uk/2441/.

Full text
Abstract:
This thesis describes the design, development and deployment of a high-speed jet flow measurement system. The apparatus was created in response to the need to collect a large quantity of statistically-converged aerodynamic data from a series of commercial turbofan engine models. This acquisition was performed in conjunction with acoustic measurements as part of the ED CoJeN project to investigate jet noise production, and associated noise reduction techniques. Particle Image Velocimetry is a well established flow measurement technique, but its application outside of the laboratory can be limit
APA, Harvard, Vancouver, ISO, and other styles
25

Park, Gee Hoon. "Exploration of parameters affecting jet injection using a high-speed X-ray imaging system." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/100100.

Full text
Abstract:
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 83-86).<br>This thesis explores the effects of two parameters, contact force and jet shape, on jet injection using a high-speed X-ray imaging system. The scope of the thesis is twofold. The first part describes the process of optimization of the high-speed imaging system for better stress distribution and deformation of the porcine tissue block used in the jet injection experiment. The parameters for the high-spe
APA, Harvard, Vancouver, ISO, and other styles
26

Pullen, Keith R. "The design and development of a small gas turbine and high speed generator." Thesis, Imperial College London, 1991. http://hdl.handle.net/10044/1/11414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Raben, Samuel. "Near wall high resolution particle image velocimetry and data reconstruction for high speed flows." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/32653.

Full text
Abstract:
The aim of this work was to understand the physical requirements as well as to develop methodology required to employ Time Resolved Digital Particle Image Velocimetry (TRDPIV) for measuring high speed, high magnification, near wall flow fields. Previous attempts to perform measurements such as this have been unsuccessful because of both limitations in equipment as well as proper methodology for processing of the data. This work addresses those issues and successfully demonstrates a test inside of a transonic turbine cascade as well as a high speed high magnification wall jet. From previous s
APA, Harvard, Vancouver, ISO, and other styles
28

El-Hasan, Tareq Sadeq Fawzi. "Design of a permanent magnet axial flux high-speed generator." Thesis, University of Hertfordshire, 2002. http://hdl.handle.net/2299/14045.

Full text
Abstract:
Electrical generating sets powered by gas turbines are required for many applications, in particular for emergency situations due to their critical attributes; high reliability, lightweight, small size, multi-fuel capabilities, low maintenance, low noise and low gas emissions. This research contends that a permanent magnet axial flux (PMAF) high-speed generator with a small gas turbine engine offers advantages over the radial flux permanent magnet generators. Higher power densities can be achieved with the axial flux configuration when compared to their counter parts of the radial flux machine
APA, Harvard, Vancouver, ISO, and other styles
29

Ebaid, Munzer Shehadeh Yousef. "Design and construction of a small gas turbine to drive a permanent magnet high speed generator." Thesis, University of Hertfordshire, 2002. http://hdl.handle.net/2299/14046.

Full text
Abstract:
Radial gas turbines engines have established prominence in the field of small turbomachinery because of their simplicity, relatively high performance and installation features. Thus they have been used in a variety of applications such as generator sets, small auxiliary power units (APu), air conditioning of aircraft cabins and hybrid electric vehicles turbines. The current research describes the design, manufacturing, construction and testing a radial type small gas turbine. The aim was to design and build the engine to drive directly a high-speed permanent magnet alternator running at 60000
APA, Harvard, Vancouver, ISO, and other styles
30

Kearney-Fischer, Martin A. "The Noise Signature and Production Mechanisms of Excited High Speed Jets." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1318961517.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Bansal, Nakul Raj. "Characterization of kinematic properties of turbulent non-premixed jet flames using high-speed Particle Image Velocimetry." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1502968666691545.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Pokora, C. D. "Spatio-temporal correlations of jets using high-speed particle image velocimetry." Thesis, Loughborough University, 2009. https://dspace.lboro.ac.uk/2134/13185.

Full text
Abstract:
The major source of aircraft noise at take-off is jet noise. If jet noise is not adequately addressed environmental impact concerns will constrain the planned growth of the air transport system. A considerable amount of research worldwide has therefore been aimed at identifying ways to reduce jet noise including development of a predictive tool that can estimate the noise generated by new nozzle designs. Current noise prediction techniques, however, still require the input of empirically calibrated noise source models and their performance is still inadequate. In addition, development of detai
APA, Harvard, Vancouver, ISO, and other styles
33

Zakrzewski, Sam Mechanical &amp Manufacturing Engineering Faculty of Engineering UNSW. "A Numerical and Experimental Investigation of High-Speed Liquid Jets - Their Characteristics and Dynamics." Awarded by:University of New South Wales. Mechanical and Manufacturing Engineering, 2002. http://handle.unsw.edu.au/1959.4/18653.

Full text
Abstract:
A comprehensive understanding of high-speed liquid jets is required for their introduction into engine and combustion applications. Their transient nature, short lifetime, unique characteristics and the inability to take many experimental readings, has inhibited this need. This study investigates the outflow of a high-speed liquid jet into quiescent atmospheric air. The key characteristics present are, a bow shock wave preceding the jet head, an enhanced mixing layer and the transient deformation of the liquid jet core. The outflow regime is studied in an experimental and numerical manner. In
APA, Harvard, Vancouver, ISO, and other styles
34

Strenge, Thomas Ralston Kevin W. "The costs and benefits of high speed vessels relative to traditional C-17 military airlift /." Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03Dec%5FStrenge.pdf.

Full text
Abstract:
Thesis (M.B.A.)--Naval Postgraduate School, December 2003.<br>"MBA professional report"--Cover. Thesis advisor(s): David R. Henderson, Kevin R. Gue. Includes bibliographical references (p. 55-57). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
35

Alontseva, D. L., A. L. Krasavin, A. V. Russakova, and N. Sadvakasova. "Computer Simulation of Temperature Profiles for DC Pulse Plasma Jet Modification of Co-based Plasma Detonation Coatings." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35117.

Full text
Abstract:
This paper deals with locating the temperature field in a coated plate heated by a moving heat source. The relevance of this problem lies in the challenge of selecting the optimum exposure modes for modifying irradiation of protective powder coatings deposited by a high-speed plasma jet. Based on a number of ex-perimental studies of the structure and properties of these coatings before and after additional plasma jet irradiation, we concluded that it is necessary to model the distribution of temperature during irradiation in order to justify the choice of irradiation parameters such as the sou
APA, Harvard, Vancouver, ISO, and other styles
36

D'Ercole, Valeria. "Study of movement and dimension of filter cake patches during pulse jet cleaning by high-speed stereo camera." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.

Find full text
Abstract:
In industrial plants exhaust gasses are cleaned from solid particles by bag filters. These filters are cleaned from the particles that have been collected at their surface by the pulse jet cleaning, an efficient regeneration method. This kind of filter cleaning takes advantage of a pressure pulse of compressed air to allow the layer of solid particles to be removed. Unfortunately, this pulse detaches the cake in an aggressive way. The cake disintegrates into fragments that are pushed to the filter bags nearby, where most of them reattach, lowering the overall regeneration efficiency. The reg
APA, Harvard, Vancouver, ISO, and other styles
37

Rahimi, Mostafa. "Heat transfer and thermal stress distribution due to the impact of a high speed jet on a hot surface." Thesis, University of Liverpool, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.399282.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Zakaria, Rami. "Jet fuel spray characterisation using optical methods : an experimental study of high speed fuel injection systems in small rotary engines." Thesis, University of Warwick, 2011. http://wrap.warwick.ac.uk/54103/.

Full text
Abstract:
This thesis was initiated by the need to develop a stable low vibration engine with a high power to weight ratio. A new rotary (Wankel) engine was chosen to meet these requirements. A further operating criterion was that the engine was required to use JP8 (aviation fuel). The difficulty created by the use of JP8 is that its combustion temperature is higher than other conventional fuels, and preheating is necessary, especially in the case of cold start. Thus, the question posed was, could a more appropriate and efficient method of fuel delivery be devised? This thesis presents the design and co
APA, Harvard, Vancouver, ISO, and other styles
39

Sinha, Aniruddha. "Development of reduced-order models and strategies for feedback control of high-speed axisymmetric jets." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1312886098.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Hamer, Matthew David. "Design of Optical Measurements for Electrothermal Plasma Discharges." Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/49101.

Full text
Abstract:
Ablation controlled electrothermal (ET) plasma discharge devices consist of a small diameter capillary through which a large amount of energy is discharged. The high energy in the discharge ablates an inner sleeve material, ionizes the material, and a high energy-density plasma jet accelerates out the open end. ET devices can find applications in internal combustion engines, Tokamak fusion fueling and stabilization, hypervelocity launchers, and propulsion. The ballistic properties of an ET device are highly dependent on the propellant and ablated material. A useful noninvasive technique to cha
APA, Harvard, Vancouver, ISO, and other styles
41

Liu, Kaiyi. "Characterization and Control of an Electrospinning Process." University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1355239985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Zhou, Zhengquan. "A theory and analysis of planing catamarans in calm and rough water." ScholarWorks@UNO, 2003. http://louisdl.louislibraries.org/u?/NOD,45.

Full text
Abstract:
Thesis (Ph.D)--University of New Orleans, 2003.<br>Title from electronic submission form. "A dissertation ... in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Engineering and Applied Science"--Dissertation t.p. Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
43

Hudský, Petr. "Diagnostika vlastností betonů vystavených působení vysokých teplot." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226717.

Full text
Abstract:
This master’s thesis studies the problems of high temperatures on cement concretes, their following diagnostics from pre-treatment to rehabilitation, the emphasis was on the use of high-speed water jet. In the experimental part of the design of a concrete composition with basalt aggregate. Were reviewed the physico-mechanical properties after thermal loading. The influence of pressure water jet on the thermal load on concrete, pull-off test, the volume of the removed concrete with a strength evaluation and comparison.
APA, Harvard, Vancouver, ISO, and other styles
44

Verdier, Antoine. "Experimental study of dilute spray combustion." Thesis, Normandie, 2017. http://www.theses.fr/2017NORMIR27/document.

Full text
Abstract:
La combustion diphasique implique de nombreux phénomènes physiques complexes, comprenant l'atomisation, la dispersion, l'évaporation et la combustion. Bien que la simulation numérique soit un outil performant pour aborder ces différentes interactions entre les phases liquides et gazeuses, la méthode doit être validée par des études expérimentales fiables. Par conséquent, des données expérimentales précises sur la structure de la flamme et sur les propriétés de la phase liquide et gazeuse le long des étapes d'évaporation et de combustion sont nécessaires. La complexité des configurations aérona
APA, Harvard, Vancouver, ISO, and other styles
45

Szymczak, Michel. "Flow visualization of cavitating, high-speed, submerged water jets." Thesis, University of Ottawa (Canada), 1988. http://hdl.handle.net/10393/5159.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

McCluskey, Amy Eileen. "Active control of high speed jets for noise mitigation." Connect to resource, 2007. http://hdl.handle.net/1811/25086.

Full text
Abstract:
Thesis (Honors)--Ohio State University, 2007.<br>Title from first page of PDF file. Document formatted into pages: contains vi, 61 p.; also includes graphics. Includes bibliographical references (p. 61). Available online via Ohio State University's Knowledge Bank.
APA, Harvard, Vancouver, ISO, and other styles
47

Lewington, Neil. "Enhancing lift on a three element high lift aerofoil system by installing air jet vortex generators." Thesis, City University London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.269315.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Welsh, B. S. "High speed deformation and break-up of shaped charge jets." Thesis, University of Nottingham, 1993. http://eprints.nottingham.ac.uk/42489/.

Full text
Abstract:
Jets resulting from shaped charges which contain metal liners are able to penetrate hard or armoured targets. Their penetration performance is related to the density of the jet and target material and also the length to which the jet can elongate. Models that describe the processes involved have generally assumed hydrodynamic fluid flow and as such have been very successful in most cases. However, the break-up of jets has proved to be inconsistent with the fluid flow models and cannot be accurately described. Break-up is important since it is the final phenomenon in tensile deformation and the
APA, Harvard, Vancouver, ISO, and other styles
49

Kastner, Jeffrey F. "Far-field radiated noise mechanisms in high reynolds number and high-speed jets." The Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=osu1181753004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Crawley, Michael B. "Understanding the Aeroacoustic Radiation Sources and Mechanisms in High-Speed Jets." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1446152138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!