Academic literature on the topic 'Injection chamber'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Injection chamber.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Injection chamber"

1

Fu, Yao, Liyan Feng, Hua Tian, Wuqiang Long, Dongsheng Dong, and Xianyin Leng. "Visualization Investigation of the Influence of Chamber Profile and Injection Parameters on Fuel Spray Spreading in a Double-Layer Diverging Combustion Chamber for a DI Diesel Engine." Energies 11, no. 9 (2018): 2343. http://dx.doi.org/10.3390/en11092343.

Full text
Abstract:
The double-layer diverging combustion chamber (DLDC chamber) aims to improve the fuel–air mixing formation and promote in-cylinder air utilization by changing fuel spray spreading characteristics. In order to investigate how the DLDC chamber profile and injection parameters affect the fuel spray spreading, visualization of fuel injection and impingement tests were carried out on two different DLDC chambers with different fuel injection parameters. The visualization test results showed that double-layer fuel spray spreading was obtained in the two DLDC chambers and the peripheral top clearance
APA, Harvard, Vancouver, ISO, and other styles
2

Ayintap, Emre, Uğurcan Keskin, Fariz Sadigov, et al. "The Injection of Air/Oxygen Bubble into the Anterior Chamber of Rabbits as a Treatment for Hyphema in Patients with Sickle Cell Disease." Journal of Ophthalmology 2014 (2014): 1–4. http://dx.doi.org/10.1155/2014/696302.

Full text
Abstract:
Purpose.To investigate the changes of partial oxygen pressure (PaO2) in aqueous humour after injecting air or oxygen bubble into the anterior chamber in sickle cell hyphema.Methods.Blood samples were taken from the same patient with sickle cell disease. Thirty-two rabbits were divided into 4 groups. In group 1 (n=8), there was no injection. Only blood injection constituted group 2 (n=8), both blood and air bubble injection constituted group 3 (n=8), and both blood and oxygen bubble injection constituted group 4 (n=8).Results.The PaO2in the aqueous humour after 10 hours from the injections was
APA, Harvard, Vancouver, ISO, and other styles
3

Vásquez, R. A., and F. S. Costa. "SPRAY CONE ANGLES GENERATED BY A DUAL CENTRIFUGAL INJECTOR." Revista de Engenharia Térmica 13, no. 1 (2014): 36. http://dx.doi.org/10.5380/reterm.v13i1.62067.

Full text
Abstract:
A dual pressure swirl injector is characterized by two independent concentric chambers which can provide independent rotational levels to a single liquid or two different liquids. This paper compares theoretical, semi-empirical and experimental results concerning the spray cone angles formed by injection of water, ethanol and biodiesel through a dual pressure swirl injector. Data are obtained for injection of the same liquid through the primary and secondary chambers and for injection of ethanol in the primary chamber and biodiesel through the secondary chamber of the injector. Experimental da
APA, Harvard, Vancouver, ISO, and other styles
4

Lo´pez, J., F. Faura, J. Herna´ndez, and P. Go´mez. "On the Critical Plunger Speed and Three-Dimensional Effects in High-Pressure Die Casting Injection Chambers." Journal of Manufacturing Science and Engineering 125, no. 3 (2003): 529–37. http://dx.doi.org/10.1115/1.1580525.

Full text
Abstract:
During the initial slow stage of the injection process in high-pressure die casting machines with horizontal cold chamber, a plunger pushes the molten metal which partially fills the injection chamber, causing the formation of a gravity wave. The evolution of the wave surface profile, which depends on the plunger acceleration law, may trap air in the molten metal, causing porosity when the metal solidifies. In this work, a one-dimensional shallow-water model, which is solved numerically using the method of characteristics, and a three-dimensional numerical model, based on a finite element form
APA, Harvard, Vancouver, ISO, and other styles
5

Serbin, Serhiy, Kateryna Burunsuz, and Daifen Chen. "Investigation of the Characteristics of a Gas Turbine Combustion Chamber with Steam Injection Operating on Hydrogen-Containing Mixtures and Hydrogen." International Journal of Chemical Engineering 2022 (December 17, 2022): 1–12. http://dx.doi.org/10.1155/2022/9123639.

Full text
Abstract:
The article is devoted to the investigation of the characteristics of a gas turbine combustion chamber with a steam injection when operating on hydrogen-containing mixtures and pure hydrogen. The parameters of a cannular combustion chamber with a separate injection of ecological and energy steam were studied to ensure the stable and ecologically clean chamber’s operation without the formation of flashback zones. The injection of ecological steam in the area of the vane swirler of the flame tube for the diffusion-type combustion chamber makes it possible to provide low emissions of nitrogen oxi
APA, Harvard, Vancouver, ISO, and other styles
6

Cho, Jun Hee, Che Gyem Yae, Jin Young Kim, et al. "Effect of 0.625% Intravitreal Povidone-iodine injections in Patients with Endophthalmitis." Journal of the Korean Ophthalmological Society 65, no. 8 (2024): 550–54. http://dx.doi.org/10.3341/jkos.2024.65.8.550.

Full text
Abstract:
Purpose: We report on three patients who received 0.625% povidone-iodine (PVI) intravitreal injections to treat endophthalmitis that did not respond to conventional antibiotic treatment or were inoperable.Case summary: Case 1 was a 42-year-old female with suspected left-eye endophthalmitis that developed after anterior chamber irrigation to treat silicone oil emulsification. A 0.625% PVI intravitreal injection reduced inflammation of the anterior chamber and the vitreous. Case 2 was an 84-year-old male who was blind in the left eye due to glaucoma. He was diagnosed with endogenous endophthalmi
APA, Harvard, Vancouver, ISO, and other styles
7

Su, W. H., T. J. Lin, H. Zhao, and Y. Q. Pei. "Research and development of an advanced combustion system for the direct injection diesel engine." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 219, no. 2 (2005): 241–52. http://dx.doi.org/10.1243/095440705x6604.

Full text
Abstract:
In order to obtain a simultaneous reduction in both NOx and particulate emissions from a direct injection (DI) diesel engine, an advanced combustion system has been researched and developed in the authors' laboratory. The new combustion system comprises homogeneous charge compression ignition (HCCI) combustion at low load by early and multiple injections, combined HCCI, and lean diffusion burning at medium and higher load conditions by means of a novel combustion chamber design and multiple injections. In this paper, the research and development of the enhanced mixing by means of a raised roun
APA, Harvard, Vancouver, ISO, and other styles
8

Hill, Philip G., and Patric Ouellette. "Transient Turbulent Gaseous Fuel Jets for Diesel Engines." Journal of Fluids Engineering 121, no. 1 (1999): 93–101. http://dx.doi.org/10.1115/1.2822018.

Full text
Abstract:
Existing data on transient turbulent jet injection in to large chambers demonstrates self-similar behavior under a wide range of conditions including compressibility, thermal and species diffusion, and nozzle under expansion. The Jet penetration distance well downstream of the virtual origin is proportional to the square root of the time and the fourth root of the ratio of nozzle exit momentum flow rate to chamber density. The constant of proportionality has been evaluated by invoking the concept of Turner that the flow can be modeled as a steady jet headed by a spherical vortex. Using incompr
APA, Harvard, Vancouver, ISO, and other styles
9

Bakhtiari, Elham, Majid Abrishami, Vahideh Nouzari, Faezeh Saffari, and Rahim Saffari. "Anterior segment changes in nonproliferative diabetic patient with macular edema treated by intravitreous bevacizumab injection." Medicine 104, no. 18 (2025): e41994. https://doi.org/10.1097/md.0000000000041994.

Full text
Abstract:
Currently, intravitreal bevacizumab is widely used for patients with intraocular neovascular disorders and macular edema. There are few studies about the effects of bevacizumab on anterior segment parameters and human cornea. The aim of this study was to evaluate the effects of intravitreal injection of bevacizumab on anterior chamber and central corneal thickness (CCT) during 3 months follow-up, using anterior segment optical coherence tomography. This longitudinal study was included 40 eyes of 20 patients. Patients received an intravitreal injection of 1.25 mg/0.05 mL bevacizumab. Anterior s
APA, Harvard, Vancouver, ISO, and other styles
10

Eski, Mehmet, Kuddusi Teberik, and Taha Sezer. "Comparison of the effects of 3 different anti-VEGF drugs on cornea thickness, lens thickness and anterior chamber depth." Medicine Science | International Medical Journal 12, no. 1 (2023): 76. http://dx.doi.org/10.5455/medscience.2023.01.02.

Full text
Abstract:
To compare the long-term effects of 3 different anti-VEGF molecules on the lens, cornea and anterior chamber in phakic patients who have received consecutive intravitreal injections. 157 patients who did not have corneal pathology but were treated with 1.25mg/0.05ml intravitreal bevacizumab, 0.5mg/0.5ml ranibizumab or 2mg/0.05ml aflibercept injections due to diabetic macular edema were retrospectively analyzed in our clinic. Patients who received three consecutive monthly injections were included to the study. Corneal thickness, lens thickness and anterior chamber depth measurements which were
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Injection chamber"

1

Hoholis, E. G. "Numerical simulation and experimental investigation of jet injection into a Quiescent combustion chamber model." Thesis, University of Manchester, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.375344.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vellaramkalayil, Jiby Jacob [Verfasser]. "Experimental and Numerical Investigations of Different Injection Schemes in a Supersonic Combustion Chamber / Jiby Jacob Vellaramkalayil." München : Verlag Dr. Hut, 2014. http://d-nb.info/1058285467/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Phan, Anthony. "Development of a rate of injection bench and constant volume combustion chamber for diesel spray diagnostics." [Ames, Iowa : Iowa State University], 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Vendomèle, Julie. "Caractérisation des réponses immunitaires systémiques induites par injection sous-rétinienne : du fondamental au transfert de gène par virus adéno-associé recombinant." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLE006.

Full text
Abstract:
Depuis plus d’un siècle, l’œil est décrit comme un site immuno-privilégié : les réponses immunitaires sont fortement contrôlées localement et un mécanisme de déviation immunitaire peut être induit en périphérie après injection d’antigènes en chambre antérieure (ACAID, Anterior Chamber-Associated Immune Deviation). Mieux caractériser le statut immunitaire de l’œil, et en particulier de la rétine, est devenu un enjeu majeur à l’heure actuel au vu des nombreuses approches thérapeutiques innovantes pour le traitement de pathologies rétiniennes. L’objectif de mon travail de thèse a été d’étudier l’
APA, Harvard, Vancouver, ISO, and other styles
5

Rocci, Denis Sara [Verfasser], Hans-Peter [Akademischer Betreuer] Kau, Thomas [Akademischer Betreuer] Sattelmayer, and Christian [Akademischer Betreuer] Mundt. "Design and Experimental Study of Injection Systems in a Supersonic Combustion Chamber / Sara Rocci Denis. Gutachter: Thomas Sattelmayer ; Christian Mundt. Betreuer: Hans-Peter Kau." München : Universitätsbibliothek der TU München, 2011. http://d-nb.info/1019588853/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mitori, Tiffany Leilani. "Flight and Stability of a Laser Inertial Fusion Energy Target in the Drift Region between Injection and the Reaction Chamber with Computational Fluid Dynamics." DigitalCommons@CalPoly, 2014. https://digitalcommons.calpoly.edu/theses/1154.

Full text
Abstract:
A Laser Inertial Fusion Energy (LIFE) target’s flight through a low Reynolds number and high Mach number regime was analyzed with computational fluid dynamics software. This regime consisted of xenon gas at 1,050 K and approximately 6,670 Pa. Simulations with similar flow conditions were performed over a sphere and compared with experimental data and published correlations for validation purposes. Transient considerations of the developing flow around the target were explored. Simulations of the target at different velocities were used to determine correlations for the drag coefficient and Nus
APA, Harvard, Vancouver, ISO, and other styles
7

Vezzosi, Riccardo. "State of the art and critical review of pre-chamber ignition systems for passenger car spark ignition engines." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/22702/.

Full text
Abstract:
Pre-chamber ignition systems are currently one of the most attractive developments for SI engines. The objective of this thesis is to present the technology at it's current state, focusing on passenger vehicles application, to analyse what issues need to be addressed for it to widely come to the market and what the potential of this techology is for the SI engine future. Replacing the spark plug with a new system capable of igniting a much leaner mixture, to reduce the likelyhood of knock, was the initial goal of the pre-chamber ignition system. What the system achieves is also a much faster
APA, Harvard, Vancouver, ISO, and other styles
8

Moreau, Denis. "Etude de mélange de jets gazeux dans une chambre de combustion." Rouen, 1988. http://www.theses.fr/1988ROUES043.

Full text
Abstract:
Etude expérimentale du mélange de plusieurs jets ronds gazeux dans différents types de configuration (doublet, triplet, quintriplet, multitriplet). Emploi de deux méthodes de diagnostic: visualisation par tomographie flash (étude qualitative de la structure des jets avant et après l'interaction) et méthode thermique (évolution du mélange par la mesure des caractéristiques du champ de température)
APA, Harvard, Vancouver, ISO, and other styles
9

Eliáš, Lumír. "Zavedení a optimalizace linky pro výrobu bimetalických komor do vstřikovacích lisů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227962.

Full text
Abstract:
The Diploma Thesis deals with the explanation and the effective solution of the initial problems during a production line implementation of different type in the existing process. In order to make the production economical effective and correspondent with decided standards and customer requirements, the thesis is based on the identification and elimination of abnormal phenomenon by new production line implementation for bimetallic barrels.
APA, Harvard, Vancouver, ISO, and other styles
10

Сукачов, Іван Іванович. "Поліпшення паливної економічності форсованих дизелів шляхом узгодження характеристик вприскування палива та форми камери згоряння". Thesis, НТУ "ХПІ", 2005. http://repository.kpi.kharkov.ua/handle/KhPI-Press/3555.

Full text
Abstract:
Дисертація присвячена вивченню особливостей процесів сумішоутворення і згоряння у форсованих дизелях та вибору раціональних параметрів характеристик вприскування палива і форми камери згоряння. Об'єктом дослідження є процеси сумішоутворення та згоряння в судових і тепловозних дизелях типу ЧН25/27, ЧН25/34, ЧН26/34, ЧН26/27 і ЧН32/32. Розглянуті специфіка і особливості процесів сумішоутворення і згоряння у форсованих дизелях. Виявлені основні причини зниження швидкостей випаровування і згоряння збільшених циклових порцій палива і визначені методи і способи узгодження характеристик вприскування
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Injection chamber"

1

Rosindale, Ian J. Modelling the thermal behaviour of the metal injection system in the hot chamber pressure die casting process. UMIST, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

United States. National Aeronautics and Space Administration., ed. Construction of a direct water-injected two-stroke engine for phased direct fuel injection-high pressure charging investigations: Order number, A49222D (LAS), April 1, 1998. Orbital Engine Company (USA) Inc., 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tacina, Robert R. Flame tube NOx emissions using a lean-direct-wall-injection combustor concept. National Aeronautics and Space Administration, Glenn Research Center, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

L, Yang S., Kundu K. P, and United States. National Aeronautics and Space Administration., eds. Evaluation of water injection effect on NOx formation for a staged gas turbine combustor. American Institute of Aeronautics and Astronautics, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

L, Yang S., Kundu K. P, and United States. National Aeronautics and Space Administration., eds. Evaluation of water injection effect on NOx formation for a staged gas turbine combustor. American Institute of Aeronautics and Astronautics, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

R, Saunders William, Vandsburger Uri, and NASA Glenn Research Center, eds. A design methodology for rapid implementation of active control systems across lean direct injection combustor platforms. National Aeronautics and Space Administration, Glenn Research Center, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

United States. National Aeronautics and Space Administration., ed. Injector mixing efficiency experiments: Final report : contract number NAS8-38609 D.O. 159. University of Alabama in Huntsville], Propulsion Research Center, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

S, Samuelsen G., and United States. National Aeronautics and Space Administration., eds. Atomization and dispersion of a liquid jet injected into a crossflow of air: Under grant NAG3-1124. National Aeronautics and Space Administration, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

F, Hamady, Somerton C, and United States. National Aeronautics and Space Administration., eds. Stratified charge rotary engine combustion studies: Progress report. National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. National Aeronautics and Space Administration., ed. STE thrust chamber technology main injector technology program and nozzle advanced development program (ADP): Final report. United Technologies, Pratt & Whitney, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Injection chamber"

1

Bell, David M., Manuela Cirtog, Jean-François Doussin, et al. "Preparation of Experiments: Addition and In Situ Production of Trace Gases and Oxidants in the Gas Phase." In A Practical Guide to Atmospheric Simulation Chambers. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-22277-1_4.

Full text
Abstract:
AbstractPreparation of the air mixture used in chamber experiments requires typically the injection of trace gases into a bath gas. In this chapter, recommendations and standard protocols are given to achieve quantitative injections of gaseous, liquid or solid species. Various methods to produce ozone, nitrate radicals and hydroxyl radicals are discussed. Short-lived oxidants need to be produced during the experiment inside the chamber from pre-cursor species. Because highly reactive oxidants like hydroxyl radicals are challenging to detect an alternative method for the quantification of radic
APA, Harvard, Vancouver, ISO, and other styles
2

Armbruster, Wolfgang, Justin S. Hardi, and Michael Oschwald. "Experimental Investigation of Injection-Coupled High-Frequency Combustion Instabilities." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_16.

Full text
Abstract:
Abstract Self-excited high-frequency combustion instabilities were investigated in a 42-injector cryogenic rocket combustor under representative conditions. In previous research it was found that the instabilities are connected to acoustic resonance of the shear-coaxial injectors. In order to gain a better understanding of the flame dynamics during instabilities, an optical access window was realised in the research combustor. This allowed 2D visualisation of supercritical flame response to acoustics under conditions similar to those found in European launcher engines. Through the window, high
APA, Harvard, Vancouver, ISO, and other styles
3

Chemnitz, Alexander, and Thomas Sattelmayer. "Calculation of the Thermoacoustic Stability of a Main Stage Thrust Chamber Demonstrator." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_15.

Full text
Abstract:
Abstract The stability behavior of a virtual thrust chamber demonstrator with low injection pressure loss is studied numerically. The approach relies on an eigenvalue analysis of the Linearized Euler Equations. An updated form of the stability prediction procedure is outlined, addressing mean flow and flame response calculations. The acoustics of the isolated oxidizer dome are discussed as well as the complete system incorporating dome and combustion chamber. The coupling between both components is realized via a scattering matrix representing the injectors. A flame transfer function is applie
APA, Harvard, Vancouver, ISO, and other styles
4

Potz, D., W. Christ, and B. Dittus. "Diesel Nozzle — The Determining Interface Between Injection System And Combustion Chamber." In Thermo- and Fluid-dynamic Processes in Diesel Engines. Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-662-04925-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Olmeda, Raffaele, and Christian Stemmer. "LES of N2/H2 Transcritical Injection in a Rocket Combustion Chamber." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-79561-0_54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Eiringhaus, Daniel, Hendrik Riedmann, and Oliver Knab. "Definition and Evaluation of Advanced Rocket Thrust Chamber Demonstrator Concepts." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_26.

Full text
Abstract:
Abstract Since the beginning of the German collaborative research center SFB-TRR 40 in 2008 ArianeGroup has been involved as industrial partner and supported the research activities with its expertise. For the final funding period ArianeGroup actively contributes to the SFB-TRR 40 with the self-financed project K4. Within project K4 virtual thrust chamber demonstrators have been defined that allow the application of the attained knowledge of the entire collaborative research center to state-of-the-art numerical benchmark cases. Furthermore, ArianeGroup uses these testcases to continue the deve
APA, Harvard, Vancouver, ISO, and other styles
7

Haidn, Oskar J., Nikolaus A. Adams, Rolf Radespiel, et al. "Collaborative Research for Future Space Transportation Systems." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_1.

Full text
Abstract:
Abstract This chapter book summarizes the major achievements of the five topical focus areas, Structural Cooling, Aft-Body Flows, Combustion Chamber, Thrust Nozzle, and Thrust-Chamber Assembly of the Collaborative Research Center (Sonderforschungsbereich) Transregio 40. Obviously, only sample highlights of each of the more than twenty individual projects can be given here and thus the interested reader is invited to read their reports which again are only a summary of the entire achievements and much more information can be found in the referenced publications. The structural cooling focus are
APA, Harvard, Vancouver, ISO, and other styles
8

König, Valentina, Michael Rom, and Siegfried Müller. "A Coupled Two-Domain Approach for Transpiration Cooling." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_2.

Full text
Abstract:
Abstract Transpiration cooling is an innovative cooling concept where a coolant is injected through a porous ceramic matrix composite (CMC) material into a hot gas flow. This setting is modeled by a two-domain approach coupling two models for the hot gas domain and the porous medium to each other by coupling conditions imposed at the interface. For this purpose, appropriate coupling conditions, in particular accounting for local mass injection, are developed. To verify the feasibility of the two-domain approach numerical simulations in 3D are performed for two different application scenarios:
APA, Harvard, Vancouver, ISO, and other styles
9

Hentschel, W., and K. P. Schindler. "Analysis of Swirl Formation in the Combustion Chamber of a Direct-Injection Diesel Engine." In Flow Visualization VI. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84824-7_101.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rees, Andreas, and Michael Oschwald. "Experimental Investigation of Transient Injection Phenomena in Rocket Combusters at Vacuum with Cryogenic Flash Boiling." In Fluid Mechanics and Its Applications. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-09008-0_11.

Full text
Abstract:
AbstractThe substitution of the toxic hydrazine in current high-altitude rocket engines like upper stages or reaction control thrusters by green propellants is a major key driver in the current technology development of rocket propulsion systems. Operating these kind of rocket engines at high-altitude leads to a sudden pressure drop in the liquid propellants during their injection into the combustion chamber with a near-vacuum atmosphere prior to ignition. The resulting superheated thermodynamic state of the liquid causes a fast and eruptive evaporation which is called flash boiling. The degre
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Injection chamber"

1

Bierwagen, Nora, Joël Martin, Andreas Ohndorf, and Christian Mundt. "A New Catalytic Chamber Concept for Multi-Phase Injection of Hydrogen Peroxide." In IAF Space Propulsion Symposium, Held at the 75th International Astronautical Congress (IAC 2024). International Astronautical Federation (IAF), 2024. https://doi.org/10.52202/078371-0029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hlaing, Ponnya, Paul Ravenhill, Peter Larsson, et al. "Preheated Liquid Fuel Injection Concept for Lean Pre-chamber Combustion." In WCX SAE World Congress Experience. SAE International, 2023. http://dx.doi.org/10.4271/2023-01-0259.

Full text
Abstract:
<div class="section abstract"><div class="htmlview paragraph">The pre-chamber combustion (PCC) concept is a proven lean or diluted combustion technique for internal combustion engines with benefits in engine efficiency and reduced NOx emissions. The engine lean operation limit can be extended by supplying auxiliary fuel into the pre-chamber and thereby, achieving mixture stratification inside the pre-chamber over the main chamber. Introducing liquid fuels into the pre-chambers is challenging owing to the small form factor of the pre-chamber. With a conventional injector, the fuel p
APA, Harvard, Vancouver, ISO, and other styles
3

Almabouada, F., D. Louhibi, M. Hamici, et al. "Gas Injection Apparatus for Vacuum Chamber." In INTERNATIONAL CONGRESS ON ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE. AIP, 2011. http://dx.doi.org/10.1063/1.3663115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Stephens, John J., Glen C. Martin, and Chia-fon F. Lee. "Experimental Investigation of a Direct Injection Diesel Injector in a Constant Volume Injection Chamber." In ASME 2001 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/2001-ice-402.

Full text
Abstract:
Abstract In an optically accessible, constant volume, quiescent injection cell, the liquid phase of a non-evaporating direct injection spray was visualized using the Exciplex Planar Laser Induced Fluorescence technique. The goal of this work was to develop a correlation for the effect of ambient density on spray tip penetration. Therefore, an experimental test matrix was set up with injection pressure and ambient density as the variables. Good optical access and a short visualization pathway allowed for high-resolution images to be recorded simultaneously via two CCD cameras. Images were recor
APA, Harvard, Vancouver, ISO, and other styles
5

Almatrafi, Fahad, Kalim Uddeen, Moez Ben Houidi, Emre Cenker, and James Turner. "Direct Injection Strategy to Extend the Lean Limit of a Passive Pre-Chamber." In ASME 2022 ICE Forward Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icef2022-89021.

Full text
Abstract:
Abstract Lean operation increases the efficiency of the Otto-cycle internal combustion engine and decreases its emissions. However, increasing the air-fuel ratio beyond stoichiometry requires higher ignition energy to maintain the stable operation of the engine. The pre-chamber emerges as one of the promising enablers of lean operation, providing much larger energy into the main combustion chamber than simple a spark plug at multiple sites to increase combustion stability. Pre-chambers are classified into two categories based on their fuel input; active pre-chambers, with a dedicated fuel inje
APA, Harvard, Vancouver, ISO, and other styles
6

Hu, Yandong, Jacky S. H. Lee, Carsten Werner, and Dongqing Li. "Enhancement of the Concentration Gradients Generated in Microchambers Appended in Microfluidic Systems." In ASME 3rd International Conference on Microchannels and Minichannels. ASMEDC, 2005. http://dx.doi.org/10.1115/icmm2005-75119.

Full text
Abstract:
Concentration gradient in a chamber appended to a microchannel is important to cell movement control and to the concentration gradient based assays on Lab-on-a-Chip devises. In this paper, the effects on the concentration field of the asymmetrical injection, the Peclet number, the mobility ratio of electrophoresis to electroosmosis, the chamber’s downstream position, and the chamber’s geometry parameters, are investigated. The most sensitive parameter is the asymmetrical injection, which can increase the concentration gradient twice as large as to that in the symmetrical injection. Furthermore
APA, Harvard, Vancouver, ISO, and other styles
7

Rahnema, Hamid, Maria Barrufet, and Dalaut Mamora. "Experimental Study of Air Injection in SAGD Chamber." In Canadian Unconventional Resources Conference. Society of Petroleum Engineers, 2011. http://dx.doi.org/10.2118/149195-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Chengke, and G. A. Karim. "3D-CFD Simulation of Diesel and Dual Fuel Engine Combustion." In ASME 2007 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/icef2007-1621.

Full text
Abstract:
A 3D-CFD model with a reduced detailed chemical kinetics of the combustion of diesel and methane fuels is developed while considering turbulence during combustion to simulate the mixture flow, formation and combustion processes within diesel and diesel/methane dual fuel engines having swirl chambers. The combustion characteristics of the pilot injection into a small pre-chamber are also investigated and compared with those within a swirl chamber. Modeling results were validated by a group of corresponding experimental data. The spatial and temporal distributions of the mixture temperature, pre
APA, Harvard, Vancouver, ISO, and other styles
9

Ikegami, Makoto, Masanori Fukuda, Yoshinobu Yoshihara, and Jiro Kaneko. "Combustion Chamber Shape and Pressurized Injection in High-Speed Direct-Injection Diesel Engines." In International Congress & Exposition. SAE International, 1990. http://dx.doi.org/10.4271/900440.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Getzlaff, J., J. Pape, C. Gruenig, D. Kuhnert, and R. Latsch. "Investigations on Pre-Chamber Spark Plug with Pilot Injection." In SAE World Congress & Exhibition. SAE International, 2007. http://dx.doi.org/10.4271/2007-01-0479.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Injection chamber"

1

Vieira, Greg, and Daniel Olsen. PR179-22206-R01 Prechamber Air and Fuel Premixing Proof of Concept. Pipeline Research Council International, Inc. (PRCI), 2024. http://dx.doi.org/10.55274/r0000099.

Full text
Abstract:
This study investigates the feasibility of injecting a premixed air and fuel charge into the precombustion chamber (PCC) of a Cooper-Bessemer GMV-4TF 2-stroke lean-burn natural gas engine. The primary ob-jectives are to enhance combustion stability, reduce emissions, and address the challenges associated with stratification within the PCC. Computational fluid dynamics (CFD) simulations were conducted to evaluate both ideal and practical premixed scenarios. The ideal premixed scenario aimed to achieve improved ho-mogeneity and faster flame propagation. Low-pressure premixed injections were test
APA, Harvard, Vancouver, ISO, and other styles
2

Banji, Titilope, and Daniel Olsen. PR-179-22207-R01 Improved In-Cylinder Mixing Injection Pressure Sensitivity. Pipeline Research Council International, Inc. (PRCI), 2024. http://dx.doi.org/10.55274/r0000063.

Full text
Abstract:
Large-bore, natural gas-fueled engines are used for gas compression at over 1700 compression stations across the US, and methane emissions have presented a challenge to their optimization over the years. A significant root of this problem has been linked to the level of air-fuel mixing in the main combustion chamber of these engines as poor mixing results in low combustion efficiency. High-pressure fuel injection is believed to be a significant way to improve air-fuel mixing in natural gas engine combustion chambers. The purpose of this present study is to determine the sensitivity of in-cylin
APA, Harvard, Vancouver, ISO, and other styles
3

Vieira, Greg, Titilope Banji, Rachel Lorenzen, and Daniel Olsen. PR179-21205-R01 Methane Abatement from LB NG 2-Stroke Cycle Engines Through In-Cylinder Modifications. Pipeline Research Council International, Inc. (PRCI), 2024. http://dx.doi.org/10.55274/r0000097.

Full text
Abstract:
There are over 7000 of large bore integral compressor engines distributed along the interstate and intrastate natural gas pipelines in the United States for gas compression. Methane emissions from large bore engines stem primarily from poor combustion efficiency. This study aims to improve the combustion efficiency of these engines, by reducing the amount of unburned methane that can escape through the crankcase vent and the exhaust gas emissions. Two broad approaches are taken to achieve this objective using experimental testing and computational studies: hydrogen blending and late cycle high
APA, Harvard, Vancouver, ISO, and other styles
4

Casademunt, Jaume. Injection of Nucleate-Boiling Slug Flows into a Heat Exchange Chamber in Microgravity. Defense Technical Information Center, 2015. http://dx.doi.org/10.21236/ada626943.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Miles, R. R., M. Havstad, M. LeBlanc, A. Chang, I. Golosker, and P. Rosso. Thermal Studies of the Laser Inertial Fusion Energy (LIFE) Target during Injection into the Fusion Chamber. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1169850.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Olsen, Daniel, Jessica Adair, and Bryan Willson. GRI-04-0158 Precombustion Chamber Fuel Metering with an Electronic Fuel Valve. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011538.

Full text
Abstract:
Precombustion chamber (PCC) ignition is a common method for extending the lean limit and reducing combustion variability in large bore natural gas engines. An important component that fails the most and requires regular replacement, besides the spark plug, is the checkvalve. In this program the use of an electronic valve for monitoring fuel to the PCC instead of the checkvalve is investigated. Other methods of improving PCC performance are also studied, such as nitrogen enrichment and PCC nozzle design. Additionally, emissions formation in the PCC is evaluated through the use of a separate pre
APA, Harvard, Vancouver, ISO, and other styles
7

Hrehor, Troy, Timothy Jacobs, and Mark Patterson. PR457-22209-R01 Feasibility Study of the Premixing of PCC Fuel and Air to Reduce GHG Emissions. Pipeline Research Council International, Inc. (PRCI), 2025. https://doi.org/10.55274/r0000115.

Full text
Abstract:
The large-bore, slow-speed, two-stroke natural gas engines that frequently power natural gas pipelines are the subjects of increasingly stringent emissions standards, particularly those targeting emissions of oxides of nitrogen (NOx) and greenhouse gases (GHGs) such as methane and carbon dioxide. Running these engines near their lean limits of operation reduces combustion temperature and therefore NOx emissions but at the cost of increased misfires and combustion instability, thus increasing GHG emissions. A pre-combustion chamber (PCC) can be equipped to provide a high-energy ignition source
APA, Harvard, Vancouver, ISO, and other styles
8

Shimizu, Yusuke, Satoshi Kato, and Takashi Fujita. Study on PCCI Engine With Direct Fuel Injection Impingement and Distribution (OSKA) Systems~Investigation on Combustion Chamber Shapes and DMC-Added Fuel. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0439.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Suzuki, Yasuko, Kazumichi Terauchi, Masahiko Emi, Kenjiro Shimano, and Yoshiteru Enomoto. Direct Heat Loss to Combustion Chamber Walls in a Direct-Injection Diesel Engine~Evaluation of Direct Heat Loss to Piston Top Land. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0547.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mitori, T. Flight and Stability of a Laser Inertial Fusion Energy Target in the Drift Region between Injection and the Reaction Chamber with Computational Fluid Dynamics. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1116962.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!