Relevant bibliographies by topics / Intercrystalline corrosion

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Intercrystalline corrosion'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Intercrystalline corrosion.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Intercrystalline corrosion"

1

FARKHSHATOV, M. N. "DECREASE IN CORROSION RESISTANCE OF MACHINE PARTS AND EQUIPMENT IN THE AGRICULTURAL PROCESSING INDUSTRIES." Tekhnicheskiy servis mashin 62, no. 3 (2024): 53–57. http://dx.doi.org/10.22314/2618-8287-2024-62-3-53-57.

Full text
Abstract:
The fast-wearing parts of machinery and equipment of the processing branch of the agro-industrial complex are made of corrosion-resistant steels of various classes. There are many ways to restore them, but the most optimal way is electrocontact welding of corrosion-resistant steels of the appropriate class. This method has a number of advantages over other recovery methods, however, the effect of electrocontact welding of the tape on the corrosion resistance of the coating has not been practically studied. (Research purpose) The research purpose is theoretically substantiating the possible rea
APA, Harvard, Vancouver, ISO, and other styles
2

Królikowski, Andrzej. "Corrosion Behaviour of Amorphous and Nanocrystalline Alloys." Solid State Phenomena 227 (January 2015): 11–14. http://dx.doi.org/10.4028/www.scientific.net/ssp.227.11.

Full text
Abstract:
Structural and chemical attributes of amorphous and nanocrystalline metals, which affect their corrosion behaviour are outlined. Effects of the fraction of intercrystalline regions, diffusivity, chemical homogeneity / heterogeneity and local ordering are indicated. These features can lead to higher or lower corrosion resistance as compared to coarse-grained counterparts, depending on the nature of tested metal and corrosive environment. Contributions of these factors are represented by two examples of passive behavior of nanocrystalline metals and amorphous Ni-P alloys.
APA, Harvard, Vancouver, ISO, and other styles
3

Chuvil’deev, Vladimir, Aleksey Nokhrin, Constantin Likhnitskii та ін. "Corrosion Resistance of the Welded Joints from the Ultrafine-Grained Near-α Titanium Alloys Ti-5Al-2V Obtained by Spark Plasma Sintering". Metals 13, № 4 (2023): 766. http://dx.doi.org/10.3390/met13040766.

Full text
Abstract:
A solid-phase diffusion welding of coarse-grained and ultrafine-grained (UFG) specimens of titanium near-α alloy Ti-5Al-2V used in nuclear power engineering was made by Spark Plasma Sintering. The failure of the welded specimens in the conditions of hot salt corrosion and electrochemical corrosion was shown to have a preferentially intercrystalline character. In the case of the presence of macrodefects, crevice corrosion of the welded joints was observed. The resistance of the alloys against the intercrystalline corrosion was found to be determined by the concentration of vanadium at the titan
APA, Harvard, Vancouver, ISO, and other styles
4

Baumgartner, M., and H. Kaesche. "Intercrystalline Corrosion and Stress Corrosion Cracking of AlZnMg Alloys." CORROSION 44, no. 4 (1988): 231–39. http://dx.doi.org/10.5006/1.3583931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mao, Ling Bo, Ren Yuan Zhang, and Feng Li. "Corroded Behavior of 310S Stainless Steel in Molten Al-Si Eutectic Alloy." Advanced Materials Research 311-313 (August 2011): 957–61. http://dx.doi.org/10.4028/www.scientific.net/amr.311-313.957.

Full text
Abstract:
Corroded behavior of 310S stainless steel by molten Al-Si eutectic alloy in high temperature thermal cycles of 495～620°C was investigated. SEM/EDX, XRD and metallographic technique were used for observing and analyzing the morphology, composition and internal microstructure of the corrosion specimens. Results showed: on the surface of 310S stainless steel, after corroded through 300 melting-solidification thermal cycles, a corrosion layer of about 3μm thick, composed mainly of Fe2Al5 phase and FeAl3 phase was formed. Besides, upon observation of internal microstructure of 310S stainless steel
APA, Harvard, Vancouver, ISO, and other styles
6

Kuzyukov, A. N. "Types of intercrystalline corrosion fracture of metals." Materials Science 29, no. 6 (1994): 612–15. http://dx.doi.org/10.1007/bf00561637.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kuznetsov, Maxim, Evgenii Zernin, Sergey P. Zhuravkov, and Nikolay Yavorovsky. "Influence of Nanopowders on Corrosion Resistance of Welded Joints." Advanced Materials Research 1040 (September 2014): 241–44. http://dx.doi.org/10.4028/www.scientific.net/amr.1040.241.

Full text
Abstract:
The paper presents experimental results on influence of tungsten, molybdenum nanopowders and aluminum oxyhydroxide phase introduced into the molten pool on the corrosion resistance of welded joints. It was shown that the nature of nanopowders significantly impacts intercrystalline corrosion of the welding joint.
APA, Harvard, Vancouver, ISO, and other styles
8

Panfilov, Peter, and Alexander Yermakov. "Brittle Intercrystalline Fracture in Iridium." Platinum Metals Review 45, no. 4 (2001): 176–78. http://dx.doi.org/10.1595/003214001x454176178.

Full text
Abstract:
Refractory iridium has a unique position among metals due to its resistance to corrosion and its inclination to brittle fracture, the latter only occurring under tension. Since 1960 iridium has been the subject of much research, but this has not lead to an understanding of its inclination to brittle fracture under load, although the problem of working iridium has been successfully solved. Grain boundary brittleness during mechanical treatment is the main problem with iridium, and is a continuing and important topic for academic discussion about iridium. Discussion of this problem, begun forty
APA, Harvard, Vancouver, ISO, and other styles
9

Chumalo, G. V., R. K. Melekhov, P. N. Fedyakin, and M. V. Koval'. "Corrosion cracking and intercrystalline corrosion of chrome-manganese-nickel austenitic steels." Soviet Materials Science 25, no. 6 (1990): 607–9. http://dx.doi.org/10.1007/bf00727088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hudecová, S., M. Uhríčik, P. Palček, M. Mikolajčík, V. Chvalníková, and M. Slezák. "The influence of structure, sensitization and corrosion on the fatigue properties of austenitic steel." Journal of Physics: Conference Series 2712, no. 1 (2024): 012008. http://dx.doi.org/10.1088/1742-6596/2712/1/012008.

Full text
Abstract:
Abstract The article will be focused on examining and comparing the influence of structure, sensitization and corrosion on the fatigue properties of austenitic stainless steel. The methodology of the experiment includes fatigue tests of samples attacked by intercrystalline corrosion. Therefore, the test samples were subjected to heat treatment for sensitization. Then these samples were subjected to long-term exposure in an aggressive corrosion solution. Experiments deal with microstructural material analysis, fractographic analysis, mechanical and fatigue tests.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Intercrystalline corrosion"

1

Arikan, Mehmet Emin. "Determination Of Susceptibility To Intergranular Corrosion Of Uns 31803 Type Duplex Stainless Steel By Electrochemical Reactivation Technique." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609886/index.pdf.

Full text
Abstract:
In the present work the effect of isothermal ageing treatment on the microstructure and on the localized corrosion resistance of a duplex stainless steel (DSS) was investigated. Specimens taken from a hot rolled cylindrical duplex stainless bar with 22% Cr grade were solution annealed at 1050&deg<br>C and then sensitization heat treatments were conducted at 650, 725 and 800&deg<br>C with duration ranging from 100 to 31622 min. The microstructural changes were examined by the light optical microscopy (LOM) and scanning electron microscopy (SEM). XRD technique and EDS analysis were used for micr
APA, Harvard, Vancouver, ISO, and other styles
2

Саранчук, А. В. "Дослідження структури, властивостей та характеристик сталі 12Х18Н10Т після хіміко-термічної обробки". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81723.

Full text
Abstract:
Робота присвячена дослідженню мікроструктури, механічних властивостей та характеристик сталі 12Х18Н10Т після хіміко-термічної обробки, а саме після дифузійного одночасного насичення кремнієм та хромом. Доцільність використання даного типу покриття на сталі 12Х18Н10Т підтверджена випробуваннями на розтяг. Стійкість сталі 12Х18Н10Т до міжкристалічної корозії доведена експериментом. Підтверджена перспективність даного типу покриття як зносотійкого.<br>The work is devoted to the study of the microstructure, mechanical properties and characteristics of steel 12Х18Н10Т (AISI 321) after chemical-heat
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Intercrystalline corrosion"

1

Stevens, P. G. In-service monitoring of intercrystalline stress corrosion on hot blast stove domes by acousticemission. Commission of the European Communities, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Intercrystalline corrosion"

1

Kaesche, Helmut. "Intercrystalline and Intracrystalline Corrosion." In Corrosion of Metals. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-96038-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"Intercrystalline Corrosion of Welded Stainless Steel Pipelines in Marine Environment." In ASM Failure Analysis Case Histories: Buildings, Bridges, and Infrastructure. ASM International, 2019. http://dx.doi.org/10.31399/asm.fach.bldgs.c9001171.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Intercrystalline Corrosion on Cerclage Wire of Sensitized 304 Type Stainless Steel." In ASM Failure Analysis Case Histories: Medical and Biomedical Devices. ASM International, 2019. http://dx.doi.org/10.31399/asm.fach.med.c0048400.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Intercrystalline corrosion"

1

Czajkowski, Carl J. "Evaluation of Type 182 Weld Metal Cracks at the Pilgrim Nuclear Power Station." In CORROSION 1986. NACE International, 1986. https://doi.org/10.5006/c1986-86253.

Full text
Abstract:
Abstract A boat sample from the Alloy 182 weld “butter” area of a 28 inch diameter recirculation outlet nozzle from the Pilgrim Unit #1 Nuclear Power Station was subjected to a metallurgical failure analysis. The analysis consisted of metallography and scanning electron microscopy/energy dispersive spectrographic examination. The fracture surfaces were intercrystalline in appearance with the fractures occurring along the dendritic grains of the weld metal. The cracking is considered to be an intercrystalline stress corrosion cracking phenomenon of susceptible Alloy 182 weld metal in a boiling
APA, Harvard, Vancouver, ISO, and other styles
2

Köhler, M., and D. C. Agarwal. "Thermal Stability and Microstructural Changes of Some Ni-Cr-Mo Alloys as Detected by Corrosion Testing." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98313.

Full text
Abstract:
Abstract Wrought Ni-Cr-Mo alloys of the C-family show a sensitivity to intercrystalline attack especially after exposure in the temperature range of 650°C to 950°C. Nevertheless, microstructural changes due to precipitation of intermetallic phases can occur up to a temperature level of 1050°C and this can affect the localized corrosion resistance. Thermal stability of wrought Alloy C-276 is a lot lower in comparison to Alloy 59. Sensitized at 870°C for only 1 hour, Alloy C-276 fails in the ASTM-G 28 B test due to rapid intercrystalline penetration and pitting whereas Alloy 59 can be aged up to
APA, Harvard, Vancouver, ISO, and other styles
3

Wilkes, J. Fred, and David A. Shifler. "Historical Perspectives of Intergranular Corrosion of Boiler Metal by Water." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93044.

Full text
Abstract:
Abstract Before the introduction of welded boiler designs, many catastrophic boiler failures were caused by intergranular corrosion (caustic embrittlement) of riveted seams, rolled tube ends, and header tube ligaments. Although use of welded drums eliminated riveted seams, rolled tube ends and tube ligaments still may be subject to intercrystalline cracking. This paper will review research that explored caustic embrittlement causes, contributing factors, diagnostic procedures, and corrective methods. Hydrogen damage of boiler tubes in higher pressure steam generators, beneath localized deposit
APA, Harvard, Vancouver, ISO, and other styles
4

Boukis, N., and P. Kritzer. "Corrosion Phenomena on Alloy 625 in Aqueous Solutions Containing Hydrochloric Acid and Oxygen under Subcritical and Supercritical Conditions." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97010.

Full text
Abstract:
Abstract Alloy 625 is frequently used as reactor material for Supercritical Water Oxidation (SCWO) applications. This is due to the favorable combination of mechanical properties, corrosion resistance, price and availability. Nevertheless, the corrosion of alloy 625 like the corrosion of other Ni-base alloys during oxidation of hazardous organic waste containing chloride proceeds too fast and is a major problem in SCWO applications. In these experiments high pressure, high-temperature resistant tube reactors made of alloy 625 were used as specimens. They were exposed to SCWO conditions, withou
APA, Harvard, Vancouver, ISO, and other styles
5

Alves, Helena, Rainer Behrens, and Franz Winter. "UNS N08031 and UNS N08031 plus, Multipurpose Alloys for the Chemical Process Industry and Related Applications." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07563.

Full text
Abstract:
Abstract Alloy UNS N08031 is combining the advantages of high-chromium alloyed materials, i.e. a high resistance to corrosive attack by oxidizing media, with a molybdenum content of more than 6 %. The nickel content is comparatively low. This way it was possible to create the highly corrosion resistant material UNS N08031 in using only small amounts of expensive alloying elements. Alloy UNS N08031 exhibits good resistance to pitting and crevice corrosion in neutral and acid aqueous solutions, which makes it advantageous to the known 6 % Mo stainless steels, and even several nickel alloys. Ther
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Jifeng, Xiaoying Tang, Houde Yu, Yaozhou Qiang, and Ruqing Wu. "Fracture Failure Analysis of 304 Stainless Steel Bolt in Chemical Plant Onshore." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78251.

Full text
Abstract:
This paper presented the fracture failure analysis of 304 stainless steel bolt that was in service in an onshore pipeline with medium pressure, normal temperature and non-corrosive. The fracture of the bolts was not due to obvious plastic deformation. Based on the scanning-electron microscope (SEM) findings, a lot of carbide distributed in boundary of the grains, which was primary Cr-carbide. All cracks were indicative of intercrystalline fracture. The corrosive element of chloride was above allowed standard as detected in fracture surface by energy-dispersive spectrometer (EDS). In addition,
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Intercrystalline corrosion' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography